| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Library of functions related to RG (source host) |
| Library OperatingSystem |
| Library SSHLibrary |
| Library restApi.py |
| Resource ../../Framework/utils/utils.robot |
| Resource ../../Framework/DHCP.robot |
| |
| *** Keywords *** |
| Subscriber Status Check |
| [Arguments] ${onu_device} |
| [Documentation] Returns Status from Subscribers List for a particular ONU device |
| ${json_result}= restApi.ApiGet VOLT_SUBSCRIBER |
| Log ${json_result} |
| ${json_result_list}= Get From dictionary ${json_result} items |
| ${getJsonDict}= utils.getDictFromListOfDict ${json_result_list} onu_device ${onu_device} |
| ${status}= Get From Dictionary ${getJsonDict} status |
| [Return] ${status} |
| |
| Create Subscriber |
| [Arguments] ${subscriber_list} ${list_index} |
| [Documentation] Sends a POST to create a subscriber in XOS |
| ${slist} = Get Variable Value ${subscriber_list} |
| ${subscriber_dictionary}= utils.listToDict ${slist} ${list_index} |
| ${api_result}= restApi.ApiPost VOLT_SUBSCRIBER ${subscriber_dictionary} |
| Should Be True ${api_result} |
| ${Subscriber_id}= Get From Dictionary ${api_result} id |
| Set Global Variable ${Subscriber_id} |
| [Return] ${Subscriber_id} |
| |
| Retrieve Subscriber |
| [Arguments] ${ctag} |
| [Documentation] Returns the subscriber id based on the subscriber's C-Tag |
| ${json_result}= restApi.ApiGet VOLT_SUBSCRIBER |
| Log ${json_result} |
| ${json_result_list}= Get From dictionary ${json_result} items |
| ${getJsonDict}= utils.getDictFromListOfDict ${json_result_list} c_tag ${ctag} |
| ${id}= Get From Dictionary ${getJsonDict} id |
| [Return] ${id} |
| |
| Delete Subscriber |
| [Arguments] ${ctag} |
| [Documentation] Deletes a given subscriber based on its c_tag |
| ${id}= Retrieve Subscriber ${ctag} |
| ${api_result}= restApi.ApiChameleonDelete VOLT_SUBSCRIBER ${id} |
| Should Be True ${api_result} |
| |
| Validate Subscriber Status |
| [Arguments] ${expected_status} ${onu_device} ${accepted_status}=${EMPTY} |
| ${status} Subscriber Status Check ${onu_device} |
| Run Keyword If '${accepted_status}' == '${EMPTY}' Should Be Equal ${status} ${expected_status} ELSE Should Contain Any ${status} ${expected_status} ${accepted_status} |
| |
| Send EAPOL Message |
| [Arguments] ${iface} ${conf_file} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| [Documentation] Executes a particular auth request on the RG via wpa_supplicant client. Requested packet should exist on src. |
| Login And Run Command On Remote System rm -f /tmp/wpa.log; wpa_supplicant -B -i ${iface} -Dwired -c /etc/wpa_supplicant/${conf_file} -f /tmp/wpa.log ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Validate Authentication |
| [Arguments] ${auth_pass} ${iface} ${conf_file} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| [Documentation] Executes a particular auth request on the RG and verifies if it succeeds. auth_pass determines if authentication should pass |
| Send EAPOL Message ${iface} ${conf_file} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Run Keyword If '${auth_pass}' == 'True' Wait Until Keyword Succeeds 120s 2s Check Remote File Contents True /tmp/wpa.log authentication completed successfully ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Run Keyword If '${auth_pass}' == 'False' Sleep 20s |
| Run Keyword If '${auth_pass}' == 'False' Check Remote File Contents False /tmp/wpa.log authentication completed successfully ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Start DHCP Server on Remote Host |
| [Arguments] ${interface} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| ${result}= Login And Run Command On Remote System dhcpd -cf /etc/dhcp/dhcpd.conf ${interface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Should Contain ${result} Listening on LPF/${interface} |
| |
| Delete IP Addresses from Interface on Remote Host |
| [Arguments] ${interface} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| Login And Run Command On Remote System ip addr flush dev ${interface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Add Double Vlan Interface on Host |
| [Arguments] ${interface} ${stag} ${ctag} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| Login And Run Command On Remote System ip link add link ${interface} name ${interface}.${stag} type vlan id ${stag} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Login And Run Command On Remote System ip link set ${interface}.${stag} up ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Login And Run Command On Remote System ip link add link ${interface}.${stag} name ${interface}.${stag}.${ctag} type vlan id ${ctag} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Login And Run Command On Remote System ip link set ${interface}.${stag}.${ctag} up ${ip} ${user} ${pass} ${container_type} ${container_name} |
| Login And Run Command On Remote System ifconfig ${interface}.${stag}.${ctag} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Delete Interface on Remote Host |
| [Arguments] ${interface} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| Login And Run Command On Remote System ip link del ${interface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Add Ip Address on Interface on Host |
| [Arguments] ${ip_address} ${interface} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| Login And Run Command On Remote System ip addr add ${ip_address} dev ${interface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Add Route to Remote Host |
| [Arguments] ${subnet} ${gateway} ${interface} ${ip} ${user} ${pass}=${None} ${container_type}=${None} ${container_name}=${None} |
| Login And Run Command On Remote System ip route add ${subnet} via ${gateway} dev ${interface} ${ip} ${user} ${pass} ${container_type} ${container_name} |
| |
| Validate DHCP and Ping |
| [Arguments] ${dhcp_should_pass} ${ping_should_pass} ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass}=${None} ${src_container_type}=${None} ${src_container_name}=${None} ${dst_dp_iface}=${None} ${dst_ip}=${None} ${dst_user}=${None} ${dst_pass}=${None} ${dst_container_type}=${None} ${dst_container_name}=${None} |
| Run Keyword If '${dst_ip}' != '${None}' Run Keywords |
| ... Add Double Vlan Interface on Host ${dst_dp_iface} ${s_tag} ${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} AND |
| ... Add IP Address on Interface on Host ${dst_dp_ip}/24 ${dst_dp_iface}.${s_tag}.${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} AND |
| ... Start DHCP Server on Remote Host ${dst_dp_iface}.${s_tag}.${c_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Run Keyword If '${src_container_type}' != 'K8S' Send Dhclient Request ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| ... ELSE Send Dhclient Request K8S |
| Run Keyword If '${dhcp_should_pass}' == 'True' Wait Until Keyword Succeeds 90s 5s Check IPv4 Address on DHCP Client True ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Run Keyword If '${dhcp_should_pass}' == 'False' Sleep 15s |
| Run Keyword If '${dhcp_should_pass}' == 'False' Check IPv4 Address on DHCP Client False ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Run Keyword If '${ping_should_pass}' == 'True' Wait Until Keyword Succeeds 60s 2s Check Ping True ${dst_dp_ip} ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| ... ELSE Wait Until Keyword Succeeds 60s 2s Check Ping False ${dst_dp_ip} ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| |
| Send Dhclient Request K8S |
| ${RG_CONTAINER}= Wait Until Keyword Succeeds 60s 1s Run kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1 |
| Run kubectl -n voltha exec ${RG_CONTAINER} -- sed -i 's/timeout 300;/timeout 30;/' /etc/dhcp/dhclient.conf |
| Run kubectl -n voltha exec ${RG_CONTAINER} -- ifconfig eth0 0.0.0.0 |
| Run kubectl -n voltha exec ${RG_CONTAINER} -- dhclient |
| |
| Validate Subscriber Service Chain |
| [Arguments] ${serial_no} ${expected}=True |
| ${resp}= CORD Get ${VOLT_SUBSCRIBER} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${sl}= Get From Dictionary ${value} subscribed_links_ids |
| \ ${result} ${slinks}= Run Keyword And Ignore Error Get From List ${sl} 0 |
| \ ${sn}= Get From Dictionary ${value} onu_device |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| #Run Keyword If '${expected}' == 'True' Should Be Equal As Integers ${slinks} 1 ELSE Should Be Empty ${sl} |
| |
| Validate Fabric CrossConnect SI |
| [Arguments] ${stag} ${expected}=True |
| ${resp}= CORD Get ${FABRIC_CROSSCONNECT_SERVICEINSTANCES} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| @{tags}= Create List |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${tag}= Get From Dictionary ${value} s_tag |
| \ Append To List ${tags} ${tag} |
| Run Keyword If '${expected}' == 'True' List Should Contain Value ${tags} ${stag} ELSE List Should Not Contain Value ${tags} ${stag} |
| |
| Validate Subscriber Count |
| [Arguments] ${expected_no} |
| ${resp}= CORD Get ${VOLT_SUBSCRIBER} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| Should Be Equal As Integers ${length} ${expected_no} |