| |
| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| import os |
| import shutil |
| import re |
| from novaclient import client as nova_client |
| from SSHTestAgent import SSHTestAgent |
| from CordTestUtils import * |
| from CordTestUtils import log_test as log |
| |
| log.setLevel('INFO') |
| |
| class VSGAccess(object): |
| |
| vcpe_map = {} |
| interface_map = {} |
| ip_addr_pattern = re.compile('[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}/[0-9]{1,2}$') |
| |
| @classmethod |
| def setUp(cls): |
| try: |
| shutil.copy('/etc/resolv.conf', '/etc/resolv.conf.orig') |
| except: |
| pass |
| |
| @classmethod |
| def tearDown(cls): |
| try: |
| shutil.copy('/etc/resolv.conf.orig', '/etc/resolv.conf') |
| except: |
| pass |
| |
| ''' |
| @method: get_nova_credentials_v2 |
| @Description: Get nova credentials |
| @params: |
| returns credential from env |
| ''' |
| @classmethod |
| def get_nova_credentials_v2(cls): |
| credential = {} |
| credential['username'] = os.environ['OS_USERNAME'] |
| credential['api_key'] = os.environ['OS_PASSWORD'] |
| credential['auth_url'] = os.environ['OS_AUTH_URL'] |
| credential['project_id'] = os.environ['OS_TENANT_NAME'] |
| return credential |
| |
| ''' |
| @method: get_compute_nodes |
| @Description: Get the list of compute nodes |
| @params: |
| returns node list |
| ''' |
| @classmethod |
| def get_compute_nodes(cls): |
| credentials = cls.get_nova_credentials_v2() |
| nvclient = nova_client.Client('2', **credentials) |
| return nvclient.hypervisors.list() |
| |
| ''' |
| @method: get_vsgs |
| @Description: Get list of vsg's running in compute node |
| @params: status of vsg |
| returns vsg wrappers |
| ''' |
| @classmethod |
| def get_vsgs(cls, active = True): |
| credentials = cls.get_nova_credentials_v2() |
| nvclient = nova_client.Client('2', **credentials) |
| vsgs = nvclient.servers.list(search_opts = {'all_tenants': 1}) |
| if active is True: |
| vsgs = filter(lambda vsg: vsg.status == 'ACTIVE', vsgs) |
| vsg_wrappers = [] |
| for vsg in vsgs: |
| vsg_wrappers.append(VSGWrapper(vsg)) |
| return vsg_wrappers |
| |
| ''' |
| @method: open_mgmt |
| @Description: Bringing up Interface for access to management |
| @params: intf = "Interface to open" |
| returns Gateway |
| ''' |
| @classmethod |
| def open_mgmt(cls, intf = 'eth0'): |
| if intf in cls.interface_map: |
| gw = cls.interface_map[intf]['gw'] |
| ip = cls.interface_map[intf]['ip'] |
| if gw != '0.0.0.0': |
| current_gw, _ = get_default_gw() |
| cmds = [ 'route del default gw {}'.format(current_gw), |
| 'ifconfig {} {} up'.format(intf, ip), |
| 'route add default gw {}'.format(gw) ] |
| for cmd in cmds: |
| os.system(cmd) |
| shutil.copy('/etc/resolv.conf', '/etc/resolv.conf.lastdhcp') |
| shutil.copy('/etc/resolv.conf.orig', '/etc/resolv.conf') |
| return current_gw |
| return None |
| |
| ''' |
| @method: close_mgmt |
| @Description: Bringing up gateway deleting default |
| @params: intf = "Interface to open" |
| dict2 = retrieved data from GET method |
| returns: NA |
| ''' |
| @classmethod |
| def close_mgmt(cls, restore_gw, intf = 'eth0'): |
| if restore_gw: |
| cmds = [ 'route del default gw 0.0.0.0', |
| 'route add default gw {}'.format(restore_gw), |
| 'cp /etc/resolv.conf.lastdhcp /etc/resolv.conf', |
| 'rm -f /etc/resolv.conf.lastdhcp' |
| ] |
| for cmd in cmds: |
| os.system(cmd) |
| |
| ''' |
| @method: health_check |
| @Description: Check if vsgs are reachable |
| @params: |
| returns True |
| ''' |
| @classmethod |
| def health_check(cls): |
| '''Returns 0 if all active vsgs are reachable through the compute node''' |
| vsgs = cls.get_vsgs() |
| vsg_status = [] |
| for vsg in vsgs: |
| vsg_status.append(vsg.get_health()) |
| unreachable = filter(lambda st: st == False, vsg_status) |
| return len(unreachable) == 0 |
| |
| ''' |
| @method: get_vcpe_vsg |
| @Description: Getting vsg vm instance info from given vcpe |
| @params: vcpe = "vcpe name" |
| returns vsg |
| ''' |
| @classmethod |
| def get_vcpe_vsg(cls, vcpe): |
| '''Find the vsg hosting the vcpe service''' |
| if vcpe in cls.vcpe_map: |
| return cls.vcpe_map[vcpe]['vsg'] |
| vsgs = cls.get_vsgs() |
| for vsg in vsgs: |
| cmd = 'sudo docker exec {} ls 2>/dev/null'.format(vcpe) |
| st, _ = vsg.run_cmd(cmd, timeout = 30) |
| if st == True: |
| return vsg |
| return None |
| |
| ''' |
| @method: save_vcpe_config |
| @Description: Saving vcpe config with lan & wan side info |
| @params: vsg |
| vcpe |
| returns True |
| ''' |
| @classmethod |
| def save_vcpe_config(cls, vsg, vcpe): |
| if vcpe not in cls.vcpe_map: |
| cmd_gw = "sudo docker exec %s ip route show | grep default | head -1 | awk '{print $3}'" %(vcpe) |
| vsg_ip = vsg.ip |
| if vsg_ip is None: |
| return False |
| st, output = vsg.run_cmd(cmd_gw, timeout = 30) |
| if st == False or not output: |
| return False |
| gw = output |
| cmd_wan = "sudo docker exec %s ip addr show eth0 |grep inet |head -1 | tr -s ' ' | awk '{print $2}' | awk '{print $1}'" %(vcpe) |
| cmd_lan = "sudo docker exec %s ip addr show eth1 |grep inet |head -1 | tr -s ' ' | awk '{print $2}' | awk '{print $1}'" %(vcpe) |
| st, output = vsg.run_cmd(cmd_wan, timeout = 30) |
| ip_wan = '0.0.0.0/24' |
| ip_lan = '0.0.0.0/24' |
| if st and output: |
| if cls.ip_addr_pattern.match(output): |
| ip_wan = output |
| |
| st, output = vsg.run_cmd(cmd_lan, timeout = 30) |
| if st and output: |
| if cls.ip_addr_pattern.match(output): |
| ip_lan = output |
| |
| cls.vcpe_map[vcpe] = { 'vsg': vsg, 'gw': gw, 'wan': ip_wan, 'lan': ip_lan } |
| |
| return True |
| |
| ''' |
| @method: restore_vcpe_config |
| @Description: Restoring saved config for lan & wan |
| @params: vcpe |
| gw |
| wan |
| lan |
| returns True/False |
| ''' |
| @classmethod |
| def restore_vcpe_config(cls, vcpe, gw = True, wan = False, lan = False): |
| if vcpe in cls.vcpe_map: |
| vsg = cls.vcpe_map[vcpe]['vsg'] |
| cmds = [] |
| if gw is True: |
| #restore default gw |
| gw = cls.vcpe_map[vcpe]['gw'] |
| cmds.append('sudo docker exec {} ip link set eth0 up'.format(vcpe)) |
| cmds.append('sudo docker exec {} route add default gw {} dev eth0'.format(vcpe, gw)) |
| if wan is True: |
| ip_wan = cls.vcpe_map[vcpe]['wan'] |
| cmds.append('sudo docker exec {} ip addr set {} dev eth0'.format(vcpe, ip_wan)) |
| if lan is True: |
| ip_lan = cls.vcpe_map[vcpe]['lan'] |
| cmds.append('sudo docker exec {} ip addr set {} dev eth1'.format(vcpe, ip_lan)) |
| ret_status = True |
| for cmd in cmds: |
| st, _ = vsg.run_cmd(cmd, timeout = 30) |
| if st == False: |
| ret_status = False |
| return ret_status |
| return False |
| |
| ''' |
| @method: get_vcpe_gw |
| @Description: Get gw of vcpe from created map |
| @params: vcpe |
| returns gw |
| ''' |
| @classmethod |
| def get_vcpe_gw(cls, vcpe): |
| if vcpe in cls.vcpe_map: |
| return cls.vcpe_map[vcpe]['gw'] |
| return None |
| |
| ''' |
| @method: get_vcpe_wan |
| @Description: |
| @params: |
| return wan side of vcpe |
| ''' |
| @classmethod |
| def get_vcpe_wan(cls, vcpe): |
| if vcpe in cls.vcpe_map: |
| return cls.vcpe_map[vcpe]['wan'] |
| return None |
| |
| ''' |
| @method: get_vcpe_lan |
| @Description: |
| @params: |
| returns True if contents of dict1 exists in dict2 |
| ''' |
| @classmethod |
| def get_vcpe_lan(cls, vcpe): |
| if vcpe in cls.vcpe_map: |
| return cls.vcpe_map[vcpe]['lan'] |
| return None |
| |
| ''' |
| @method: vcpe_wan_up |
| @Description: |
| @params: |
| returns status |
| ''' |
| @classmethod |
| def vcpe_wan_up(cls, vcpe): |
| return cls.restore_vcpe_config(vcpe) |
| |
| ''' |
| @method: vcpe_lan_up |
| @Description: |
| @params: |
| returns status |
| ''' |
| @classmethod |
| def vcpe_lan_up(cls, vcpe, vsg = None): |
| if vsg is None: |
| vsg = cls.get_vcpe_vsg(vcpe) |
| if vsg is None: |
| return False |
| cmd = 'sudo docker exec {} ip link set eth1 up'.format(vcpe) |
| st, _ = vsg.run_cmd(cmd, timeout = 30) |
| return st |
| |
| ''' |
| @method: vcpe_port_down |
| @Description: |
| @params: |
| returns status |
| ''' |
| #we cannot access compute node if the vcpe port gets dhcp as default would be through fabric |
| @classmethod |
| def vcpe_port_down(cls, vcpe, port, vsg = None): |
| if vsg is None: |
| vsg = cls.get_vcpe_vsg(vcpe) |
| if vsg is None: |
| return False |
| if not cls.save_vcpe_config(vsg, vcpe): |
| return False |
| cmd = 'sudo docker exec {} ip link set {} down'.format(vcpe, port) |
| st, _ = vsg.run_cmd(cmd, timeout = 30) |
| if st is False: |
| cls.restore_vcpe_config(vcpe) |
| return False |
| return st |
| |
| ''' |
| @method: vcpe_wan_down |
| @Description: |
| @params: |
| returns status |
| ''' |
| @classmethod |
| def vcpe_wan_down(cls, vcpe, vsg = None): |
| return cls.vcpe_port_down(vcpe, 'eth0', vsg = vsg) |
| |
| ''' |
| @method: vcpe_lan_down |
| @Description: |
| @params: |
| returns status |
| ''' |
| @classmethod |
| def vcpe_lan_down(cls, vcpe, vsg = None): |
| return cls.vcpe_port_down(vcpe, 'eth1', vsg = vsg) |
| |
| ''' |
| @method: save_interface_config |
| @Description: |
| @params: |
| returns NA |
| ''' |
| @classmethod |
| def save_interface_config(cls, intf): |
| if intf not in cls.interface_map: |
| ip = get_ip(intf) |
| if ip is None: |
| ip = '0.0.0.0' |
| default_gw, default_gw_device = get_default_gw() |
| if default_gw_device != intf: |
| default_gw = '0.0.0.0' |
| cls.interface_map[intf] = { 'ip' : ip, 'gw': default_gw } |
| #bounce the interface to remove default gw |
| cmds = ['ifconfig {} 0 down'.format(intf), |
| 'ifconfig {} 0 up'.format(intf) |
| ] |
| for cmd in cmds: |
| os.system(cmd) |
| |
| ''' |
| @method: restore_interface_config |
| @Description: |
| @params: |
| returns NA |
| ''' |
| #open up access to compute node |
| @classmethod |
| def restore_interface_config(cls, intf, vcpe = None): |
| if intf in cls.interface_map: |
| ip = cls.interface_map[intf]['ip'] |
| gw = cls.interface_map[intf]['gw'] |
| del cls.interface_map[intf] |
| cmds = [] |
| if vcpe is not None: |
| shutil.copy('/etc/resolv.conf.orig', '/etc/resolv.conf') |
| #bounce the vcpes to clear default gw |
| cmds.append('ifconfig {} 0 down'.format(vcpe)) |
| cmds.append('ifconfig {} 0 up'.format(vcpe)) |
| cmds.append('ifconfig {} {} up'.format(intf, ip)) |
| if gw and gw != '0.0.0.0': |
| cmds.append('route add default gw {} dev {}'.format(gw, intf)) |
| for cmd in cmds: |
| os.system(cmd) |
| |
| ''' |
| @method: vcpe_get_dhcp |
| @Description: Get DHCP from vcpe dhcp interface. |
| @params: |
| returns vcpe ip |
| ''' |
| @classmethod |
| def vcpe_get_dhcp(cls, vcpe, mgmt = 'eth0'): |
| '''Get DHCP from vcpe dhcp interface.''' |
| '''We have to also save the management interface config for restoration''' |
| cls.save_interface_config(mgmt) |
| getstatusoutput('pkill -9 dhclient') |
| st, output = getstatusoutput('dhclient -q {}'.format(vcpe)) |
| getstatusoutput('pkill -9 dhclient') |
| vcpe_ip = get_ip(vcpe) |
| if vcpe_ip is None: |
| cls.restore_interface_config(mgmt) |
| return None |
| if output: |
| #workaround for docker container apparmor that prevents moving dhclient resolv.conf |
| start = output.find('/etc/resolv.conf') |
| if start >= 0: |
| end = output.find("'", start) |
| dns_file = output[start:end] |
| if os.access(dns_file, os.F_OK): |
| shutil.copy(dns_file, '/etc/resolv.conf') |
| |
| default_gw, default_gw_device = get_default_gw() |
| if default_gw and default_gw_device == vcpe: |
| return vcpe_ip |
| cls.restore_interface_config(mgmt, vcpe = vcpe) |
| return None |
| |
| class VSGWrapper(object): |
| |
| def __init__(self, vsg): |
| self.vsg = vsg |
| self.name = self.vsg.name |
| self.compute_node = self.get_compute_node() |
| self.ip = self.get_ip() |
| |
| ''' |
| @method: get_compute_node |
| @Description: |
| @params: |
| returns compute node name |
| ''' |
| def get_compute_node(self): |
| return self.vsg._info['OS-EXT-SRV-ATTR:hypervisor_hostname'] |
| |
| ''' |
| @method: get_ip |
| @Description: |
| @params: |
| returns ip of network |
| ''' |
| def get_ip(self): |
| if 'management' in self.vsg.networks: |
| ips = self.vsg.networks['management'] |
| if len(ips) > 0: |
| return ips[0] |
| return None |
| |
| ''' |
| @method: run_cmd_compute |
| @Description: |
| @params: |
| returns Status & output |
| ''' |
| def run_cmd_compute(self, cmd, timeout = 5): |
| ssh_agent = SSHTestAgent(self.compute_node) |
| st, output = ssh_agent.run_cmd(cmd, timeout = timeout) |
| if st == True and output: |
| output = output.strip() |
| else: |
| output = None |
| |
| return st, output |
| |
| ''' |
| @method: run_cmd |
| @Description: |
| @params: |
| returns status & output |
| ''' |
| def run_cmd(self, cmd, timeout = 5, mgmt = 'eth0'): |
| last_gw = VSGAccess.open_mgmt(mgmt) |
| ssh_agent = SSHTestAgent(self.compute_node) |
| ssh_cmd = 'ssh {} {}'.format(self.ip, cmd) |
| st, output = ssh_agent.run_cmd(ssh_cmd, timeout = timeout) |
| if st == True and output: |
| output = output.strip() |
| else: |
| output = None |
| VSGAccess.close_mgmt(last_gw, mgmt) |
| return st, output |
| |
| ''' |
| @method: get_health |
| @Description: |
| @params: |
| returns Status |
| ''' |
| def get_health(self): |
| if self.ip is None: |
| return True |
| cmd = 'ping -c 1 {}'.format(self.ip) |
| log.info('Pinging VSG %s at IP %s' %(self.name, self.ip)) |
| st, _ = self.run_cmd_compute(cmd) |
| log.info('VSG %s at IP %s is %s' %(self.name, self.ip, 'reachable' if st == True else 'unreachable')) |
| return st |
| |
| ''' |
| @method: check_access |
| @Description: validates access |
| @params: |
| returns Status |
| ''' |
| def check_access(self): |
| if self.ip is None: |
| return True |
| ssh_agent = SSHTestAgent(self.compute_node) |
| st, _ = ssh_agent.run_cmd('ls', timeout=10) |
| if st == False: |
| log.error('Compute node at %s is not accessible' %(self.compute_node)) |
| return st |
| log.info('Checking if VSG at %s is accessible from compute node %s' %(self.ip, self.compute_node)) |
| st, _ = ssh_agent.run_cmd('ssh {} ls'.format(self.ip), timeout=30) |
| if st == True: |
| log.info('OK') |
| return st |