blob: 191af712e0a14ef917453a691b4147e18b8265b0 [file] [log] [blame]
import os
import sys
import unittest
import time
import json
import requests
import threading
from IGMP import *
from random import randint
from threading import Timer
from threadPool import ThreadPool
from nose.tools import *
from nose.twistedtools import reactor, deferred
from twisted.internet import defer
from CordTestConfig import setup_module, teardown_module
from CordTestUtils import log_test
from VolthaCtrl import VolthaCtrl
from CordTestUtils import log_test, get_controller
from portmaps import g_subscriber_port_map
from OltConfig import *
from EapTLS import TLSAuthTest
from Channels import Channels, IgmpChannel
from Stats import Stats
from DHCP import DHCPTest
from OnosCtrl import OnosCtrl
from CordLogger import CordLogger
from scapy.all import *
from scapy_ssl_tls.ssl_tls import *
from scapy_ssl_tls.ssl_tls_crypto import *
from CordTestServer import cord_test_onos_restart, cord_test_shell, cord_test_radius_restart
from CordContainer import Onos
class Voltha_olt_subscribers(Channels):
STATS_JOIN = 2
STATS_LEAVE = 3
def __init__(self, tx_port, rx_port, num_channels =1, channel_start = 0, src_list = None):
self.tx_port = tx_port
self.rx_port = rx_port
self.src_list = src_list
try:
self.tx_intf = tx_port
self.rx_intf = rx_port
except:
self.tx_intf = self.INTF_TX_DEFAULT
self.rx_intf = self.INTF_RX_DEFAULT
# num = 1
# channel_start = 0
mcast_cb = None
Channels.__init__(self, num_channels, channel_start = channel_start, src_list = src_list,
iface = self.rx_intf, iface_mcast = self.tx_intf, mcast_cb = mcast_cb)
self.loginType = 'wireless'
##start streaming channels
self.join_map = {}
##accumulated join recv stats
self.join_rx_stats = Stats()
self.recv_timeout = False
def channel_join_update(self, chan, join_time):
self.join_map[chan] = ( Stats(), Stats(), Stats(), Stats() )
self.channel_update(chan, self.STATS_JOIN, 1, t = join_time)
def channel_join(self, chan = 0, delay = 2, src_list = None, record_type = None):
'''Join a channel and create a send/recv stats map'''
if self.join_map.has_key(chan):
del self.join_map[chan]
self.delay = delay
chan, join_time = self.join(chan, src_list = src_list, record_type = record_type)
#chan, join_time = self.join(chan)
self.channel_join_update(chan, join_time)
return chan
def channel_join_next(self, delay = 2, leave_flag = True):
'''Joins the next channel leaving the last channel'''
if self.last_chan:
if self.join_map.has_key(self.last_chan):
del self.join_map[self.last_chan]
self.delay = delay
chan, join_time = self.join_next(leave_flag = leave_flag)
self.channel_join_update(chan, join_time)
return chan
def channel_jump(self, delay = 2):
'''Jumps randomly to the next channel leaving the last channel'''
if self.last_chan is not None:
if self.join_map.has_key(self.last_chan):
del self.join_map[self.last_chan]
self.delay = delay
chan, join_time = self.jump()
self.channel_join_update(chan, join_time)
return chan
def channel_leave(self, chan = 0, force = False, src_list = None):
if self.join_map.has_key(chan):
del self.join_map[chan]
self.leave(chan, force = force, src_list = src_list)
def channel_update(self, chan, stats_type, packets, t=0):
if type(chan) == type(0):
chan_list = (chan,)
else:
chan_list = chan
for c in chan_list:
if self.join_map.has_key(c):
self.join_map[c][stats_type].update(packets = packets, t = t)
def channel_receive(self, chan, cb = None, count = 1, timeout = 5, src_list = None):
log_test.info('Subscriber on port %s receiving from group %s, channel %d' %
(self.rx_intf, self.gaddr(chan), chan))
r = self.recv(chan, cb = cb, count = count, timeout = timeout, src_list = src_list)
if len(r) == 0:
log_test.info('Subscriber on port %s timed out' %( self.rx_intf))
self.test_status = False
else:
log_test.info('Subscriber on port %s received %d packets' %(self.rx_intf, len(r)))
if self.recv_timeout:
##Negative test case is disabled for now
assert_equal(len(r), 0)
return self.test_status
def recv_channel_cb(self, pkt, src_list = None):
##First verify that we have received the packet for the joined instance
log_test.info('Packet received for group %s, subscriber, port %s' %
(pkt[IP].dst, self.rx_intf))
if self.recv_timeout:
return
chan = self.caddr(pkt[IP].dst)
assert_equal(chan in self.join_map.keys(), True)
recv_time = monotonic.monotonic() * 1000000
join_time = self.join_map[chan][self.STATS_JOIN].start
delta = recv_time - join_time
self.join_rx_stats.update(packets=1, t = delta, usecs = True)
self.channel_update(chan, self.STATS_RX, 1, t = delta)
log_test.debug('Packet received in %.3f usecs for group %s after join' %(delta, pkt[IP].dst))
class voltha_subscriber_pool:
def __init__(self, subscriber, test_cbs):
self.subscriber = subscriber
self.test_cbs = test_cbs
def pool_cb(self):
for cb in self.test_cbs:
if cb:
self.test_status = cb(self.subscriber, multiple_sub = True)
if self.test_status is not True:
## This is chaning for other sub status has to check again
self.test_status = True
log_test.info('This service is failed and other services will not run for this subscriber')
break
log_test.info('This Subscriber is tested for multiple service eligibility ')
self.test_status = True
class voltha_exchange(unittest.TestCase):
OLT_TYPE = 'tibit_olt'
OLT_MAC = '00:0c:e2:31:12:00'
VOLTHA_HOST = 'localhost'
VOLTHA_REST_PORT = 8881
VOLTHA_OLT_TYPE = 'ponsim_olt'
VOLTHA_OLT_MAC = '00:0c:e2:31:12:00'
VOLTHA_IGMP_ITERATIONS = 100
voltha = None
success = True
apps = ('org.opencord.aaa', 'org.onosproject.dhcp')
olt_apps = () #'org.opencord.cordmcast')
vtn_app = 'org.opencord.vtn'
table_app = 'org.ciena.cordigmp'
test_path = os.path.dirname(os.path.realpath(__file__))
table_app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-multitable-2.0-SNAPSHOT.oar')
app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-2.0-SNAPSHOT.oar')
olt_app_file = os.path.join(test_path, '..', 'apps/olt-app-1.2-SNAPSHOT.oar')
olt_app_name = 'org.onosproject.olt'
#onos_config_path = os.path.join(test_path, '..', 'setup/onos-config')
olt_conf_file = os.getenv('OLT_CONFIG_FILE', os.path.join(test_path, '..', 'setup/olt_config.json'))
onos_restartable = bool(int(os.getenv('ONOS_RESTART', 0)))
VOLTHA_AUTO_CONFIGURE = False
num_joins = 0
VOLTHA_ENABLED = True
INTF_TX_DEFAULT = 'veth2'
INTF_RX_DEFAULT = 'veth0'
INTF_2_RX_DEFAULT = 'veth6'
TESTCASE_TIMEOUT = 300
# VOLTHA_CONFIG_FAKE = True
VOLTHA_CONFIG_FAKE = False
VOLTHA_UPLINK_VLAN_MAP = { 'of:0000000000000001' : '222' }
VOLTHA_ONU_UNI_PORT = 'veth0'
dhcp_server_config = {
"ip": "10.1.11.50",
"mac": "ca:fe:ca:fe:ca:fe",
"subnet": "255.255.252.0",
"broadcast": "10.1.11.255",
"router": "10.1.8.1",
"domain": "8.8.8.8",
"ttl": "63",
"delay": "2",
"startip": "10.1.11.51",
"endip": "10.1.11.100"
}
CLIENT_CERT = """-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----"""
CLIENT_CERT_INVALID = '''-----BEGIN CERTIFICATE-----
MIIDvTCCAqWgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBizELMAkGA1UEBhMCVVMx
CzAJBgNVBAgTAkNBMRIwEAYDVQQHEwlTb21ld2hlcmUxEzARBgNVBAoTCkNpZW5h
IEluYy4xHjAcBgkqhkiG9w0BCQEWD2FkbWluQGNpZW5hLmNvbTEmMCQGA1UEAxMd
RXhhbXBsZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkwHhcNMTYwMzExMTg1MzM2WhcN
MTcwMzA2MTg1MzM2WjBnMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNV
BAoTCkNpZW5hIEluYy4xFzAVBgNVBAMUDnVzZXJAY2llbmEuY29tMR0wGwYJKoZI
hvcNAQkBFg51c2VyQGNpZW5hLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC
AQoCggEBAOxemcBsPn9tZsCa5o2JA6sQDC7A6JgCNXXl2VFzKLNNvB9PS6D7ZBsQ
5An0zEDMNzi51q7lnrYg1XyiE4S8FzMGAFr94RlGMQJUbRD9V/oqszMX4k++iAOK
tIA1gr3x7Zi+0tkjVSVzXTmgNnhChAamdMsjYUG5+CY9WAicXyy+VEV3zTphZZDR
OjcjEp4m/TSXVPYPgYDXI40YZKX5BdvqykWtT/tIgZb48RS1NPyN/XkCYzl3bv21
qx7Mc0fcEbsJBIIRYTUkfxnsilcnmLxSYO+p+DZ9uBLBzcQt+4Rd5pLSfi21WM39
2Z2oOi3vs/OYAPAqgmi2JWOv3mePa/8CAwEAAaNPME0wEwYDVR0lBAwwCgYIKwYB
BQUHAwIwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL3d3dy5leGFtcGxlLmNvbS9l
eGFtcGxlX2NhLmNybDANBgkqhkiG9w0BAQUFAAOCAQEALBzMPDTIB6sLyPl0T6JV
MjOkyldAVhXWiQsTjaGQGJUUe1cmUJyZbUZEc13MygXMPOM4x7z6VpXGuq1c/Vxn
VzQ2fNnbJcIAHi/7G8W5/SQfPesIVDsHTEc4ZspPi5jlS/MVX3HOC+BDbOjdbwqP
RX0JEr+uOyhjO+lRxG8ilMRACoBUbw1eDuVDoEBgErSUC44pq5ioDw2xelc+Y6hQ
dmtYwfY0DbvwxHtA495frLyPcastDiT/zre7NL51MyUDPjjYjghNQEwvu66IKbQ3
T1tJBrgI7/WI+dqhKBFolKGKTDWIHsZXQvZ1snGu/FRYzg1l+R/jT8cRB9BDwhUt
yg==
-----END CERTIFICATE-----'''
@classmethod
def update_apps_version(cls):
version = Onos.getVersion()
major = int(version.split('.')[0])
minor = int(version.split('.')[1])
cordigmp_app_version = '2.0-SNAPSHOT'
olt_app_version = '1.2-SNAPSHOT'
if major > 1:
cordigmp_app_version = '3.0-SNAPSHOT'
olt_app_version = '2.0-SNAPSHOT'
elif major == 1:
if minor > 10:
cordigmp_app_version = '3.0-SNAPSHOT'
olt_app_version = '2.0-SNAPSHOT'
elif minor <= 8:
olt_app_version = '1.1-SNAPSHOT'
cls.app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-{}.oar'.format(cordigmp_app_version))
cls.table_app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-multitable-{}.oar'.format(cordigmp_app_version))
cls.olt_app_file = os.path.join(cls.test_path, '..', 'apps/olt-app-{}.oar'.format(olt_app_version))
@classmethod
def onos_load_config(cls, app, config):
status, code = OnosCtrl.config(config)
if status is False:
log_test.info('JSON config request for app %s returned status %d' %(app, code))
assert_equal(status, True)
time.sleep(2)
@classmethod
def onos_aaa_load(cls):
aaa_dict = {'apps' : { 'org.opencord.aaa' : { 'AAA' : { 'radiusSecret': 'radius_password',
'radiusIp': '172.17.0.2' } } } }
radius_ip = os.getenv('ONOS_AAA_IP') or '172.17.0.2'
aaa_dict['apps']['org.opencord.aaa']['AAA']['radiusIp'] = radius_ip
cls.onos_load_config('org.opencord.aaa', aaa_dict)
@classmethod
def onos_dhcp_table_load(self, config = None):
dhcp_dict = {'apps' : { 'org.onosproject.dhcp' : { 'dhcp' : copy.copy(self.dhcp_server_config) } } }
dhcp_config = dhcp_dict['apps']['org.onosproject.dhcp']['dhcp']
if config:
for k in config.keys():
if dhcp_config.has_key(k):
dhcp_config[k] = config[k]
self.onos_load_config('org.onosproject.dhcp', dhcp_dict)
def dhcp_sndrcv(self, dhcp, update_seed = False, mac = None, validation = None):
if validation:
cip, sip = dhcp.discover(mac = mac, update_seed = update_seed)
assert_not_equal(cip, None)
assert_not_equal(sip, None)
log_test.info('Got dhcp client IP %s from server %s for mac %s' %
(cip, sip, dhcp.get_mac(cip)[0]))
if validation == False:
cip, sip = dhcp.discover(mac = mac, update_seed = update_seed)
assert_equal(cip, None)
assert_equal(sip, None)
log_test.info('Dhcp client did not get IP from server')
if validation == 'skip':
cip, sip = dhcp.discover(mac = mac, update_seed = update_seed)
return cip,sip
def dhcp_request(self, onu_iface = None, seed_ip = '10.10.10.1', update_seed = False, validation = None, startip = '10.10.10.20', mac = None):
config = {'startip':startip, 'endip':'10.10.10.200',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
dhcp = DHCPTest(seed_ip = seed_ip, iface =onu_iface)
cip, sip = self.dhcp_sndrcv(dhcp, update_seed = update_seed, validation = validation, mac = mac)
return cip, sip
@classmethod
def setUpClass(cls):
cls.update_apps_version()
cls.voltha = VolthaCtrl(cls.VOLTHA_HOST, rest_port = cls.VOLTHA_REST_PORT)
cls.install_app_table()
cls.olt = OltConfig(olt_conf_file = cls.olt_conf_file)
cls.port_map, cls.port_list = cls.olt.olt_port_map()
cls.switches = cls.port_map['switches']
cls.ponsim_ports = cls.port_map['ponsim']
cls.num_ports = cls.port_map['num_ports']
if cls.num_ports > 1:
cls.num_ports -= 1 ##account for the tx port
cls.activate_apps(cls.apps + cls.olt_apps)
cls.onos_aaa_load()
@classmethod
def tearDownClass(cls):
'''Deactivate the olt apps and restart OVS back'''
apps = cls.olt_apps + ( cls.table_app,)
for app in apps:
onos_ctrl = OnosCtrl(app)
onos_ctrl.deactivate()
cls.install_app_igmp()
@classmethod
def install_app_igmp(cls):
##Uninstall the table app on class exit
OnosCtrl.uninstall_app(cls.table_app)
time.sleep(2)
log_test.info('Installing back the cord igmp app %s for subscriber test on exit' %(cls.app_file))
OnosCtrl.install_app(cls.app_file)
def remove_olt(self, switch_map):
controller = get_controller()
auth = ('karaf', 'karaf')
#remove subscriber for every port on all the voltha devices
for device, device_map in switch_map.iteritems():
uni_ports = device_map['ports']
uplink_vlan = device_map['uplink_vlan']
for port in uni_ports:
rest_url = 'http://{}:8181/onos/olt/oltapp/{}/{}'.format(controller,
device,
port)
resp = requests.delete(rest_url, auth = auth)
if resp.status_code not in [204, 202, 200]:
log_test.error('Error deleting subscriber for device %s on port %s' %(device, port))
else:
log_test.info('Deleted subscriber for device %s on port %s' %(device, port))
OnosCtrl.uninstall_app(self.olt_app_file)
def config_olt(self, switch_map):
controller = get_controller()
auth = ('karaf', 'karaf')
#configure subscriber for every port on all the voltha devices
for device, device_map in switch_map.iteritems():
uni_ports = device_map['ports']
uplink_vlan = device_map['uplink_vlan']
for port in uni_ports:
vlan = port
rest_url = 'http://{}:8181/onos/olt/oltapp/{}/{}/{}'.format(controller,
device,
port,
vlan)
resp = requests.post(rest_url, auth = auth)
#assert_equal(resp.ok, True)
def voltha_uni_port_toggle(self, uni_port = None):
## Admin state of port is down and up
if not uni_port:
uni_port = self.INTF_RX_DEFAULT
cmd = 'ifconfig {} down'.format(uni_port)
os.system(cmd)
log_test.info('Admin state of uni_port is down')
time.sleep(30)
cmd = 'ifconfig {} up'.format(uni_port)
os.system(cmd)
log_test.info('Admin state of uni_port is up now')
time.sleep(30)
return
@classmethod
def install_app_table(cls):
##Uninstall the existing app if any
OnosCtrl.uninstall_app(cls.table_app)
time.sleep(2)
log_test.info('Installing the multi table app %s for subscriber test' %(cls.table_app_file))
OnosCtrl.install_app(cls.table_app_file)
time.sleep(3)
@classmethod
def activate_apps(cls, apps):
for app in apps:
onos_ctrl = OnosCtrl(app)
status, _ = onos_ctrl.activate()
assert_equal(status, True)
time.sleep(2)
@classmethod
def deactivate_apps(cls, apps):
cls.success = True
for app in apps:
onos_ctrl = OnosCtrl(app)
status, _ = onos_ctrl.deactivate()
if status is False:
cls.success = False
# assert_equal(status, True)
time.sleep(2)
def random_ip(self,start_ip = '10.10.10.20', end_ip = '10.10.10.65'):
start = list(map(int, start_ip.split(".")))
end = list(map(int, end_ip.split(".")))
temp = start
ip_range = []
ip_range.append(start_ip)
while temp != end:
start[3] += 1
for i in (3, 2, 1):
if temp[i] == 255:
temp[i] = 0
temp[i-1] += 1
ip_range.append(".".join(map(str, temp)))
return random.choice(ip_range)
def random_mcast_ip(self,start_ip = '224.0.1.0', end_ip = '224.0.1.100'):
start = list(map(int, start_ip.split(".")))
end = list(map(int, end_ip.split(".")))
temp = start
ip_range = []
ip_range.append(start_ip)
while temp != end:
start[3] += 1
for i in (3, 2, 1):
if temp[i] == 255:
temp[i] = 0
temp[i-1] += 1
ip_range.append(".".join(map(str, temp)))
return random.choice(ip_range)
def tls_flow_check(self, olt_ports, cert_info = None, multiple_sub = False):
if multiple_sub is True:
olt_nni_port = olt_ports.tx_port
olt_uni_port = olt_ports.rx_port
else:
olt_uni_port = olt_ports
def tls_fail_cb():
log_test.info('TLS verification failed')
if cert_info is None:
tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port)
log_test.info('Running subscriber %s tls auth test with valid TLS certificate' %olt_uni_port)
tls.runTest()
if tls.failTest is True:
self.success = False
assert_equal(tls.failTest, False)
if cert_info == "no_cert":
tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = '')
log_test.info('Running subscriber %s tls auth test with no TLS certificate' %olt_uni_port)
tls.runTest()
if tls.failTest is False:
self.success = False
assert_equal(tls.failTest, True)
if cert_info == "invalid_cert":
tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = self.CLIENT_CERT_INVALID)
log_test.info('Running subscriber %s tls auth test with invalid TLS certificate' %olt_uni_port)
tls.runTest()
if tls.failTest is False:
self.success = False
assert_equal(tls.failTest, True)
if cert_info == "same_cert":
tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port)
log_test.info('Running subscriber %s tls auth test with invalid TLS certificate' %olt_uni_port)
tls.runTest()
if tls.failTest is False:
self.success = False
assert_equal(tls.failTest, True)
if cert_info == "app_deactivate" or cert_info == "restart_radius" or cert_info == "disable_olt_device" or \
cert_info == "uni_port_admin_down" or cert_info == "restart_olt_device" or cert_info == "restart_onu_device":
tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = self.CLIENT_CERT_INVALID)
log_test.info('Running subscriber %s tls auth test with %s' %(olt_uni_port,cert_info))
tls.runTest()
if tls.failTest is False:
self.success = False
assert_equal(tls.failTest, True)
self.test_status = True
return self.test_status
def dhcp_flow_check(self, olt_ports, negative_test = None, multiple_sub = False):
if multiple_sub is True:
olt_nni_port = olt_ports.tx_port
onu_iface = olt_ports.rx_port
dhcp_server_startip = self.random_ip()
random_mac = '00:00:00:0a:0a:' + hex(random.randrange(50,254)).split('x')[1]
else:
onu_iface = olt_ports
dhcp_server_startip = '10.10.10.20'
random_mac = None
self.success = True
if negative_test is None:
cip, sip = self.dhcp_request(onu_iface, update_seed = True, validation = 'skip', startip = dhcp_server_startip, mac = random_mac)
if cip == None or sip == None:
self.success = False
self.test_status = False
assert_not_equal(cip,None)
assert_not_equal(sip,None)
else:
log_test.info('Subscriber %s client ip %s from server %s' %(onu_iface, cip, sip))
self.test_status = True
if negative_test == "interrupting_dhcp_flows":
cip, sip = self.dhcp_request(onu_iface, update_seed = True, validation = False)
if cip is not None:
self.success = False
assert_equal(cip,None)
log_test.info('Subscriber %s not got client ip %s from server' %(onu_iface, cip))
self.test_status = True
if negative_test == "invalid_src_mac_broadcast":
config = {'startip':'10.10.10.20', 'endip':'10.10.10.69',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover(mac='ff:ff:ff:ff:ff:ff')
if cip is not None:
self.success = False
log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected self.success = %s '%self.success)
assert_equal(cip,None)
log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected')
self.test_status = True
if negative_test == "invalid_src_mac_multicast":
config = {'startip':'10.10.10.20', 'endip':'10.10.10.69',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover(mac='01:80:c2:91:02:e4')
if cip is not None:
self.success = False
assert_equal(cip,None)
log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected')
self.test_status = True
if negative_test == "invalid_src_mac_junk":
config = {'startip':'10.10.10.20', 'endip':'10.10.10.69',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover(mac='00:00:00:00:00:00')
if cip is not None:
self.success = False
assert_equal(cip,None)
log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected')
self.test_status = True
if negative_test == "request_release":
config = {'startip':'10.10.100.20', 'endip':'10.10.100.230',
'ip':'10.10.100.2', 'mac': "ca:fe:ca:fe:8a:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.100.255', 'router':'10.10.100.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.100.10', iface = onu_iface)
cip, sip = self.dhcp_sndrcv(self.dhcp)
log_test.info('Releasing ip %s to server %s' %(cip, sip))
if not self.dhcp.release(cip):
self.success = False
assert_equal(self.dhcp.release(cip), True)
log_test.info('Triggering DHCP discover again after release')
cip2, sip2 = self.dhcp_sndrcv(self.dhcp, update_seed = True)
log_test.info('Verifying released IP was given back on rediscover')
if not cip == cip2:
self.success = False
assert_equal(cip, cip2)
log_test.info('Test done. Releasing ip %s to server %s' %(cip2, sip2))
assert_equal(self.dhcp.release(cip2), True)
self.test_status = True
if negative_test == "starvation_positive":
config = {'startip':'193.170.1.20', 'endip':'193.170.1.69',
'ip':'193.170.1.2', 'mac': "ca:fe:c2:fe:cc:fe",
'subnet': '255.255.255.0', 'broadcast':'192.168.1.255', 'router': '192.168.1.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '192.169.1.1', iface = onu_iface)
ip_map = {}
for i in range(10):
cip, sip = self.dhcp_sndrcv(self.dhcp, update_seed = True)
if ip_map.has_key(cip):
self.success = False
log_test.info('IP %s given out multiple times' %cip)
assert_equal(False, ip_map.has_key(cip))
ip_map[cip] = sip
self.test_status = True
if negative_test == "starvation_negative":
config = {'startip':'182.17.0.20', 'endip':'182.17.0.69',
'ip':'182.17.0.2', 'mac': "ca:fe:c3:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'182.17.0.255', 'router':'182.17.0.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '182.17.0.1', iface = onu_iface)
log_test.info('Verifying passitive case')
for x in xrange(50):
mac = RandMAC()._fix()
self.dhcp_sndrcv(self.dhcp,mac = mac)
log_test.info('Verifying negative case')
cip, sip = self.dhcp_sndrcv(self.dhcp,update_seed = True)
if cip or sip is not None:
self.success = False
assert_equal(cip, None)
assert_equal(sip, None)
self.test_status = True
self.success = True
if negative_test == "multiple_discover":
config = {'startip':'10.10.10.20', 'endip':'10.10.10.69',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover()
log_test.info('Got dhcp client IP %s from server %s for mac %s . Not going to send DHCPREQUEST.' %
(cip, sip, mac) )
if cip is None:
self.success = False
assert_not_equal(cip, None)
log_test.info('Triggering DHCP discover again.')
new_cip, new_sip, new_mac, _ = self.dhcp.only_discover()
if not new_cip == cip:
self.success = False
assert_equal(new_cip, cip)
log_test.info('client got same IP as expected when sent 2nd discovery')
self.test_status = True
# self.success = True
if negative_test == "multiple_requests":
config = {'startip':'10.10.10.20', 'endip':'10.10.10.69',
'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface)
log_test.info('Sending DHCP discover and DHCP request.')
cip, sip = self.dhcp_sndrcv(self.dhcp,update_seed = True)
mac = self.dhcp.get_mac(cip)[0]
log_test.info("Sending DHCP request again.")
new_cip, new_sip = self.dhcp.only_request(cip, mac)
assert_equal(new_cip,cip)
log_test.info('server offered same IP to clain for multiple requests, as expected')
self.test_status = True
# self.success = True
if negative_test == "desired_ip_address":
config = {'startip':'20.20.20.30', 'endip':'20.20.20.69',
'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '20.20.20.50', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover(desired = True)
if cip or sip is None:
self.success = False
assert_not_equal(cip, None)
log_test.info('Got dhcp client IP %s from server %s for mac %s .' %
(cip, sip, mac))
if not self.dhcp.seed_ip == cip:
self.success = False
assert_equal(cip,self.dhcp.seed_ip)
log_test.info('ONOS dhcp server offered client requested IP %s as expected'%self.dhcp.seed_ip)
self.test_status = True
# self.success = True
if negative_test == "desired_out_of_pool_ip_address":
config = {'startip':'20.20.20.30', 'endip':'20.20.20.69',
'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '20.20.20.75', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover(desired = True)
if cip or sip is None:
self.success = False
assert_not_equal(cip, None)
log_test.info('Got dhcp client IP %s from server %s for mac %s .' %
(cip, sip, mac) )
if self.dhcp.seed_ip == cip:
self.success = False
assert_not_equal(cip,self.dhcp.seed_ip)
log_test.info('server offered IP from its pool of IPs when requested out of pool IP, as expected')
self.test_status = True
# self.success = True
if negative_test == "dhcp_renew":
config = {'startip':'20.20.20.30', 'endip':'20.20.20.69',
'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '20.20.20.45', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover()
log_test.info('Got dhcp client IP %s from server %s for mac %s .' %
(cip, sip, mac) )
if cip or sip is None:
self.success = False
assert_not_equal(cip, None)
new_cip, new_sip, lval = self.dhcp.only_request(cip, mac, renew_time = True)
log_test.info('waiting renew time %d seconds to send next request packet'%lval)
time.sleep(lval)
latest_cip, latest_sip, lval = self.dhcp.only_request(cip, mac, renew_time = True)
if not latest_cip == cip:
self.success = False
assert_equal(latest_cip,cip)
log_test.info('client got same IP after renew time, as expected')
self.test_status = True
# self.success = True
if negative_test == "dhcp_rebind":
config = {'startip':'20.20.20.30', 'endip':'20.20.20.69',
'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe",
'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'}
self.onos_dhcp_table_load(config)
self.dhcp = DHCPTest(seed_ip = '20.20.20.45', iface = onu_iface)
cip, sip, mac, _ = self.dhcp.only_discover()
log_test.info('Got dhcp client IP %s from server %s for mac %s .' %
(cip, sip, mac) )
if cip or sip is None:
self.success = False
assert_not_equal(cip, None)
new_cip, new_sip, lval = self.dhcp.only_request(cip, mac, rebind_time = True)
log_test.info('waiting rebind time %d seconds to send next request packet'%lval)
time.sleep(lval)
latest_cip, latest_sip = self.dhcp.only_request(new_cip, mac)
if not latest_cip == cip:
self.success = False
assert_equal(latest_cip,cip)
log_test.info('client got same IP after rebind time, as expected')
self.test_status = True
# self.success = True
return self.test_status
def recv_channel_cb(self, pkt):
##First verify that we have received the packet for the joined instance
chan = self.subscriber.caddr(pkt[IP].dst)
assert_equal(chan in self.subscriber.join_map.keys(), True)
recv_time = monotonic.monotonic() * 1000000
join_time = self.subscriber.join_map[chan][self.subscriber.STATS_JOIN].start
delta = recv_time - join_time
self.subscriber.join_rx_stats.update(packets=1, t = delta, usecs = True)
self.subscriber.channel_update(chan, self.subscriber.STATS_RX, 1, t = delta)
log_test.debug('Packet received in %.3f usecs for group %s after join' %(delta, pkt[IP].dst))
self.test_status = True
def traffic_verify(self, subscriber):
# if subscriber.has_service('TRAFFIC'):
url = 'http://www.google.com'
resp = requests.get(url)
self.test_status = resp.ok
if resp.ok == False:
log_test.info('Subscriber %s failed get from url %s with status code %d'
%(subscriber.name, url, resp.status_code))
else:
log_test.info('GET request from %s succeeded for subscriber %s'
%(url, subscriber.name))
return self.test_status
def igmp_flow_check(self, subscriber, multiple_sub = False):
chan = 0
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
self.num_joins += 1
while self.num_joins < self.num_subscribers:
time.sleep(5)
log_test.info('All subscribers have joined the channel')
for i in range(10):
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port))
subscriber.channel_leave(chan, src_list = subscriber.src_list)
time.sleep(5)
log_test.info('Interface %s Join RX stats for subscriber, %s' %(subscriber.iface,subscriber.join_rx_stats))
#Should not receive packets for this subscriber
self.recv_timeout = True
subscriber.recv_timeout = True
subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
subscriber.recv_timeout = False
self.recv_timeout = False
log_test.info('Joining channel %d for subscriber port %s' %(chan, subscriber.rx_port))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
# self.test_status = True
return self.test_status
def igmp_flow_check_join_change_to_exclude(self, subscriber, multiple_sub = False):
chan = 0
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
self.num_joins += 1
while self.num_joins < self.num_subscribers:
time.sleep(5)
log_test.info('All subscribers have joined the channel')
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
time.sleep(5)
log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1])
if self.test_status is True:
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0])
if self.test_status is True:
log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port))
self.test_status = False
subscriber.recv_timeout = False
self.recv_timeout = False
subscriber.channel_leave(chan, src_list = subscriber.src_list)
# self.test_status = True
return self.test_status
def igmp_flow_check_join_change_to_exclude_again_include_back(self, subscriber, multiple_sub = False):
chan = 0
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
self.num_joins += 1
while self.num_joins < self.num_subscribers:
time.sleep(5)
log_test.info('All subscribers have joined the channel')
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
time.sleep(5)
log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1])
if self.test_status is True:
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0])
if self.test_status is True:
log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port))
self.test_status = False
subscriber.recv_timeout = False
self.recv_timeout = False
log_test.info('Again include the source list in the group %s souce ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_INCLUDE)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
subscriber.recv_timeout = False
self.recv_timeout = False
subscriber.channel_leave(chan, src_list = subscriber.src_list)
# self.test_status = True
return self.test_status
def igmp_flow_check_join_change_to_block(self, subscriber, multiple_sub = False):
chan = 0
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
self.num_joins += 1
while self.num_joins < self.num_subscribers:
time.sleep(5)
log_test.info('All subscribers have joined the channel')
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
time.sleep(5)
log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_BLOCK_OLD)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1])
if self.test_status is True:
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0])
if self.test_status is True:
log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port))
self.test_status = False
subscriber.recv_timeout = False
self.recv_timeout = False
subscriber.channel_leave(chan, src_list = subscriber.src_list)
return self.test_status
def igmp_flow_check_join_change_to_block_again_allow_back(self, subscriber, multiple_sub = False):
chan = 0
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list)
self.num_joins += 1
while self.num_joins < self.num_subscribers:
time.sleep(5)
log_test.info('All subscribers have joined the channel')
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
time.sleep(5)
log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1])
if self.test_status is True:
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0])
if self.test_status is True:
log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port))
self.test_status = False
subscriber.recv_timeout = False
self.recv_timeout = False
log_test.info('Again include the source list in the group %s souce ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0]))
subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_ALLOW_NEW)
time.sleep(5)
self.recv_timeout = True
subscriber.recv_timeout = True
self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list)
subscriber.recv_timeout = False
self.recv_timeout = False
subscriber.channel_leave(chan, src_list = subscriber.src_list)
return self.test_status
def voltha_igmp_jump_verify(self, subscriber):
if subscriber.has_service('IGMP'):
for i in xrange(subscriber.num):
log_test.info('Subscriber %s jumping channel' %subscriber.name)
chan = subscriber.channel_jump(delay=0)
subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1)
log_test.info('Verified receive for channel %d, subscriber %s' %(chan, subscriber.name))
time.sleep(3)
log_test.info('Interface %s Jump RX stats for subscriber %s, %s' %(subscriber.iface, subscriber.name, subscriber.join_rx_stats))
self.test_status = True
return self.test_status
def voltha_igmp_next_verify(self, subscriber):
for c in xrange(self.VOLTHA_IGMP_ITERATIONS):
for i in xrange(subscriber.num):
if i:
chan = subscriber.channel_join_next(delay=0, leave_flag = self.leave_flag)
time.sleep(0.2)
else:
chan = subscriber.channel_join(i, delay=0)
time.sleep(0.2)
if subscriber.num == 1:
subscriber.channel_leave(chan)
log_test.info('Joined next channel %d for subscriber %s' %(chan, subscriber.name))
#subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count=1)
#log_test.info('Verified receive for channel %d, subscriber %s' %(chan, subscriber.name))
self.test_status = True
return self.test_status
def voltha_subscribers(self, services, cbs = None, num_subscribers = 1, num_channels = 1, src_list = None):
"""Test subscriber join next for channel surfing"""
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
if self.VOLTHA_OLT_TYPE.startswith('ponsim'):
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
log_test.info('Enabling ponsim olt')
device_id, status = voltha.enable_device(self.VOLTHA_OLT_TYPE, address = ponsim_address)
else:
log_test.info('This setup test cases is developed on ponsim olt only, hence stop execution')
assert_equal(False, True)
assert_not_equal(device_id, None)
if status == False:
voltha.disable_device(device_id, delete = True)
assert_equal(status, True)
time.sleep(10)
switch_map = None
olt_configured = False
try:
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
if not switch_map:
log_test.info('No voltha devices found')
return
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
self.num_subscribers = num_subscribers
self.num_channels = num_channels
test_status = self.subscriber_flows_check(num_subscribers = self.num_subscribers,
num_channels = self.num_channels,
cbs = cbs,
port_list = self.generate_port_list(self.num_subscribers,
self.num_channels),
src_list = src_list, services = services)
assert_equal(test_status, True)
finally:
if switch_map is not None:
if olt_configured is True:
self.remove_olt(switch_map)
voltha.disable_device(device_id, delete = True)
time.sleep(10)
log_test.info('Uninstalling OLT app')
OnosCtrl.uninstall_app(self.olt_app_name)
def subscriber_flows_check( self, num_subscribers = 1, num_channels = 1,
channel_start = 0, cbs = None, port_list = [], src_list = None,
services = None, negative_subscriber_auth = None):
self.test_status = False
self.ovs_cleanup()
subscribers_count = num_subscribers
sub_loop_count = num_subscribers
if not port_list:
port_list = self.generate_port_list(num_subscribers, num_channels)
subscriber_tx_rx_ports = []
for i in range(num_subscribers):
#subscriber_tx_rx_ports.append((self.port_map['ports'][port_list[i][0]], self.port_map['ports'][port_list[i][1]]))
subscriber_tx_rx_ports.append(Voltha_olt_subscribers(tx_port = self.port_map['ports'][port_list[i][0]],
rx_port = self.port_map['ports'][port_list[i][1]],
num_channels = num_channels,src_list = src_list,))
self.onos_aaa_load()
#load the ssm list for all subscriber channels
igmpChannel = IgmpChannel(src_list = src_list)
ssm_groups = map(lambda sub: sub.channels, subscriber_tx_rx_ports)
ssm_list = reduce(lambda ssm1, ssm2: ssm1+ssm2, ssm_groups)
igmpChannel.igmp_load_ssm_config(ssm_list, src_list= src_list)
self.thread_pool = ThreadPool(min(100, subscribers_count), queue_size=1, wait_timeout=1)
chan_leave = False #for single channel, multiple subscribers
if cbs is None:
cbs = (self.tls_flow_check, self.dhcp_flow_check, self.igmp_flow_check)
chan_leave = True
for subscriber in subscriber_tx_rx_ports:
sub_loop_count = sub_loop_count - 1
pool_object = voltha_subscriber_pool(subscriber, cbs)
self.thread_pool.addTask(pool_object.pool_cb)
self.thread_pool.cleanUpThreads()
subscribers_count = 0
return self.test_status
def generate_port_list(self, subscribers, channels):
return self.port_list[:subscribers]
@classmethod
def ovs_cleanup(cls):
##For every test case, delete all the OVS groups
cmd = 'ovs-ofctl del-groups br-int -OOpenFlow11 >/dev/null 2>&1'
try:
cord_test_shell(cmd)
##Since olt config is used for this test, we just fire a careless local cmd as well
os.system(cmd)
finally:
return
def test_olt_enable_disable(self):
log_test.info('Enabling OLT type %s, MAC %s' %(self.OLT_TYPE, self.OLT_MAC))
device_id, status = self.voltha.enable_device(self.OLT_TYPE, self.OLT_MAC)
assert_not_equal(device_id, None)
try:
assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
def test_ponsim_enable_disable(self):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
try:
assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
def test_subscriber_with_voltha_for_eap_tls_authentication(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue auth request packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber is authenticated successfully.
"""
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
if status == False:
self.voltha.disable_device(device_id, delete = True)
assert_equal(status, True)
time.sleep(10)
switch_map = None
olt_configured = False
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
try:
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
if not switch_map:
log_test.info('No voltha devices found')
return
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT)
assert_equal(auth_status, True)
finally:
if switch_map is not None:
if olt_configured is True:
self.remove_olt(switch_map)
self.voltha.disable_device(device_id, delete = True)
time.sleep(10)
OnosCtrl.uninstall_app(self.olt_app_name)
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_failure(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls without cert auth packet is being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_with_no_cert_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "no_cert")
try:
assert_equal(auth_status, True)
assert_equal(status, True)
time.sleep(10)
finally:
self.remove_olt(switch_map)
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_no_cert_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_using_invalid_cert(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets and exchange invalid cert from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls with invalid cert auth packet is being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_with_invalid_cert_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert")
try:
assert_equal(auth_status, True)
assert_equal(status, True)
time.sleep(10)
finally:
self.remove_olt(switch_map)
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_invalid_cert_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_multiple_invalid_authentication_attempts(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets and exchange invalid cert from CORD TESTER voltha test module acting as a subscriber for multiple times.
4. Validate that eap tls with invalid cert auth packet is being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_with_no_cert_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert")
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert")
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "no_cert")
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert")
try:
assert_equal(auth_status, True)
assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_no_cert_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_with_aaa_app_deactivation(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls without sending client hello, it's not being exchanged between client, onos and freeradius.
5. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_deactivating_app(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,"app_deactivate",))
thread2 = threading.Thread(target = self.deactivate_apps, args = (aaa_app,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart aaa app in onos during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_deactivating_app, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_radius_server(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls with restart of radius server and packets are being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_restarting_radius(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,"restart_radius"))
thread2 = threading.Thread(target = cord_test_radius_restart)
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart radius server during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_restarting_radius, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_with_disabled_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Disable olt which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_operating_olt_state(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "disable_olt_device",))
thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id, False,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Disable the ponsim olt device during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_operating_olt_state, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_disabling_uni_port(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Disable uni port which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_operating_olt_state(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "uni_port_admin_down",))
thread2 = threading.Thread(target = self.voltha_uni_port_toggle)
thread1.start()
time.sleep(randint(1,2))
log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_operating_olt_state, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_carrying_out_multiple_times_toggling_of_uni_port(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Disable uni port which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow
"""
df = defer.Deferred()
no_iterations = 10
def tls_flow_check_with_disable_olt_device_scenario(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "uni_port_admin_down",))
thread2 = threading.Thread(target = self.voltha_uni_port_down_up)
thread1.start()
time.sleep(randint(1,2))
log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT)
try:
# assert_equal(status, True)
assert_equal(auth_status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Restart olt which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_operating_olt_state(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_olt_device",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart the ponsim olt device during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_operating_olt_state, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_performing_multiple_times_restart_of_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Restart olt which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow
"""
df = defer.Deferred()
no_iterations = 10
def tls_flow_check_with_disable_olt_device_scenario(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_olt_device",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart the ponsim olt device during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT)
try:
# assert_equal(status, True)
assert_equal(auth_status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_onu(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Restart onu which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
"""
df = defer.Deferred()
def tls_flow_check_operating_olt_state(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_onu_device",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (onu_device_id,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart the ponsim oon device during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_eap_tls_authentication_performing_multiple_times_restart_of_onu(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Restart onu which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow
"""
df = defer.Deferred()
no_iterations = 10
def tls_flow_check_operating_olt_state(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
for i in range(no_iterations):
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_onu_device",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (onu_device_id,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Restart the ponsim oon device during tls auth flow check on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT)
try:
# assert_equal(status, True)
assert_equal(auth_status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_operating_olt_state, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_eap_tls_authentication(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT is detected and ONU ports(nni and 2 uni's) are being seen.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls valid auth packets are being exchanged between two subscriber, onos and freeradius.
5. Verify that two subscribers are authenticated successfully.
"""
df = defer.Deferred()
def tls_flow_check_on_two_subscribers_same_olt_device(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_eap_tls_authentication_using_same_certificates(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT is detected and ONU ports(nni and 2 uni's) are being seen.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that two valid certificates are being exchanged between two subscriber, onos and freeradius.
5. Verify that two subscribers are not authenticated.
"""
df = defer.Deferred()
def tls_flow_check_on_two_subscribers_same_olt_device(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "same_cert",))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_tls_packets_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT is detected and ONU ports(nni and 2 uni's) are being seen.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius.
5. Validate that eap tls valid auth packets are being exchanged between invalid client, onos and freeradius.
6. Verify that valid subscriber authenticated successfully.
7. Verify that invalid subscriber are not authenticated successfully.
"""
df = defer.Deferred()
def tls_flow_check_on_two_subscribers_same_olt_device(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "no_cert",))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_cert_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT is detected and ONU ports(nni and 2 uni's) are being seen.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius.
5. Validate that eap tls invalid cert auth packets are being exchanged between invalid subscriber, onos and freeradius.
6. Verify that valid subscriber authenticated successfully.
7. Verify that invalid subscriber are not authenticated successfully.
"""
df = defer.Deferred()
def tls_flow_check_on_two_subscribers_same_olt_device(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "invalid_cert",))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_eap_tls_authentication_with_one_uni_port_disabled(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
5. Validate that eap tls packets are being exchanged between two subscriber, onos and freeradius.
6. Verify that subscriber authenticated successfully.
7. Disable one of the uni port which is seen in voltha and issue tls auth packets from subscriber.
8. Validate that eap tls packets are not being exchanged between one subscriber, onos and freeradius.
9. Verify that subscriber authentication is unsuccessful..
10. Verify that other subscriber authenticated successfully.
"""
df = defer.Deferred()
def tls_flow_check_on_two_subscribers_same_olt_device(df):
aaa_app = ["org.opencord.aaa"]
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
devices_list = self.voltha.get_devices()
log_test.info('All available devices on voltha = %s'%devices_list['items'])
onu_device_id = devices_list['items'][1]['id']
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
devices_list = self.voltha.get_devices()
thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "uni_port_admin_down",))
thread1.start()
time.sleep(randint(1,2))
log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha')
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
# assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df)
return df
def test_3_subscribers_with_voltha_for_eap_tls_authentication(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (3 subscribers)
4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber is authenticated successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 3
num_channels = 1
services = ('TLS')
cbs = (self.tls_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_5_subscribers_with_voltha_for_eap_tls_authentication(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (5 subscriber)
4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber is authenticated successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 5
num_channels = 1
services = ('TLS')
cbs = (self.tls_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_9_subscribers_with_voltha_for_eap_tls_authentication(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server.
3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (9 subscriber)
4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius.
5. Verify that subscriber is authenticated successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 9
num_channels = 1
services = ('TLS')
cbs = (self.tls_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_request(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.remove_olt(switch_map)
self.voltha.disable_device(device_id, delete = True)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_request_with_invalid_broadcast_source_mac(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac broadcast from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber should not get ip from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_broadcast")
try:
assert_equal(dhcp_status, True)
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_request_with_invalid_multicast_source_mac(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac multicast from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber should not get ip from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_multicast")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_request_with_invalid_source_mac(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac zero from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber should not get ip from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_junk")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_request_and_release(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Send dhcp release from residential subscrber to dhcp server which is running as onos app.
6 Verify that subscriber should not get ip from dhcp server, ping to gateway.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "request_release")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_starvation_positive_scenario(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Repeat step 3 and 4 for 10 times.
6 Verify that subscriber should get ip from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "starvation_positive")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_starvation_negative_scenario(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber without of pool ip to dhcp server which is running as onos app.
4. Verify that subscriber should not get ip from dhcp server.
5. Repeat steps 3 and 4 for 10 times.
6 Verify that subscriber should not get ip from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "starvation_negative")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_sending_multiple_discover(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Repeat step 3 for 50 times.
6 Verify that subscriber should get same ip which was received from 1st discover from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "multiple_discover")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_sending_multiple_request(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Send DHCP request to dhcp server which is running as onos app.
6. Repeat step 5 for 50 times.
7. Verify that subscriber should get same ip which was received from 1st discover from dhcp server.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "multiple_requests")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_requesting_desired_ip_address(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired ip address from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip which was requested in step 3 from dhcp server successfully.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "desired_ip_address")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_requesting_desired_out_of_pool_ip_address(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired out of pool ip address from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber should not get ip which was requested in step 3 from dhcp server, and its offered only within dhcp pool of ip.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "desired_out_of_pool_ip_address")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_deactivating_dhcp_app_in_onos(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Deactivate dhcp server app in onos.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
"""
df = defer.Deferred()
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.deactivate_apps, args = (dhcp_app,))
log_test.info('Restart dhcp app in onos during client send discover to voltha')
thread2.start()
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_renew_time(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Send dhcp renew packet to dhcp server which is running as onos app.
6. Repeat step 4.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "dhcp_renew")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_rebind_time(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Send dhcp rebind packet to dhcp server which is running as onos app.
6. Repeat step 4.
"""
df = defer.Deferred()
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "dhcp_rebind")
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_toggling_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
"""
df = defer.Deferred()
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,))
log_test.info('Disable the olt device in during client send discover to voltha')
thread2.start()
# time.sleep(randint(0,1))
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_with_multiple_times_disabling_of_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
8. Repeat steps from 3 to 7 for 10 times and finally verify dhcp flow
"""
df = defer.Deferred()
no_iterations = 10
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,))
log_test.info('Disable the olt device in during client send discover to voltha')
thread2.start()
# time.sleep(randint(0,1))
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
try:
assert_equal(self.success, True)
assert_equal(dhcp_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_toggling_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
8. Enable olt devices which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
df = defer.Deferred()
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,))
thread2.start()
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_toggling_olt_multiple_times(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
8. Enable olt devices which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
df = defer.Deferred()
no_iterations = 10
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,))
thread2.start()
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
try:
assert_equal(dhcp_status, True)
#assert_equal(status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_disabling_onu_port(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
"""
df = defer.Deferred()
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha_uni_port_down_up)
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_disabling_onu_port_multiple_times(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
"""
df = defer.Deferred()
no_iterations = 10
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha_uni_port_down_up)
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
try:
#assert_equal(status, True)
assert_equal(dhcp_status, True)
assert_equal(self.success, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_toggling_onu_port(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
8. Enable onu port which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
df = defer.Deferred()
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha_uni_port_down_up)
log_test.info('Restart dhcp app in onos during client send discover to voltha')
thread2.start()
time.sleep(randint(0,1))
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
assert_equal(dhcp_status, True)
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcp_toggling_onu_port_multiple_times(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from dhcp server, and ping to gateway.
8. Enable onu port which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
df = defer.Deferred()
no_iterations = 10
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
for i in range(no_iterations):
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",))
thread2 = threading.Thread(target = self.voltha_uni_port_down_up)
log_test.info('Restart dhcp app in onos during client send discover to voltha')
thread2.start()
time.sleep(randint(0,1))
thread1.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT)
assert_equal(dhcp_status, True)
try:
assert_equal(self.success, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_discover(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got different ips from dhcp server successfully.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
# if self.success is not True:
assert_equal(dhcp_flow_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_multiple_discover(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Repeat step 3 and 4 for 10 times for both subscribers.
6 Verify that subscribers should get same ips which are offered the first time from dhcp server.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"multiple_discover",))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"multiple_discover",))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
# if self.success is not True:
assert_equal(dhcp_flow_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_and_with_multiple_discover_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber.
6 Verify that subscriber should get same ip which is offered the first time from dhcp server and other subscriber ping to gateway should not failed
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"multiple_discover",))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
# if self.success is not True:
assert_equal(dhcp_flow_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_discover_and_desired_ip_address_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from one residential subscriber to dhcp server which is running as onos app.
3. Send dhcp request with desired ip from other residential subscriber to dhcp server which is running as onos app.
4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from dhcp server successfully.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_ip_address",))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
# if self.success is not True:
assert_equal(dhcp_flow_status, True)
#assert_equal(status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_discover_within_and_without_dhcp_pool_ip_addresses(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to dhcp server which is running as onos app.
3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to dhcp server which is running as onos app.
4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from dhcp server successfully.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"desired_ip_address",))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_out_of_pool_ip_address",))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_disabling_onu_port_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Disable onu port on which access one subscriber and ping to gateway from other subscriber.
6. Repeat step 3 and 4 for one subscriber where uni port is down.
7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"desired_ip_address",))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_out_of_pool_ip_address",))
thread1.start()
thread2.start()
time.sleep(10)
thread1.join()
thread2.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_toggling_onu_port_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Disable onu port on which access one subscriber and ping to gateway from other subscriber.
6. Repeat step 3 and 4 for one subscriber where uni port is down.
7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed.
8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber.
9. Repeat step 3 and 4 for one subscriber where uni port is up now.
10. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread3 = threading.Thread(target = self.voltha_uni_port_down_up, args = (self.INTF_2_RX_DEFAULT,))
thread1.start()
thread2.start()
thread3.start()
time.sleep(10)
thread1.join()
thread2.join()
thread3.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_disabling_olt(self):
"""
Test Method: uni_port
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Disable the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread3 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,))
thread1.start()
thread2.start()
thread3.start()
time.sleep(10)
thread1.join()
thread2.join()
thread3.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_toggling_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Disable the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed.
8. Enable the olt device which is detected in voltha.
9. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread3 = threading.Thread(target = self.voltha.restart_device, args = (device_id,))
thread1.start()
thread2.start()
thread3.start()
time.sleep(10)
thread1.join()
thread2.join()
thread3.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
@deferred(TESTCASE_TIMEOUT)
def test_two_subscribers_with_voltha_for_dhcp_with_paused_olt(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app.
4. Verify that subscribers had got ip from dhcp server successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Pause the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed.
"""
df = defer.Deferred()
self.success = True
dhcp_app = 'org.onosproject.dhcp'
def dhcp_flow_check_scenario(df):
log_test.info('Enabling ponsim_olt')
ponsim_address = '{}:50060'.format(self.VOLTHA_HOST)
device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address)
assert_not_equal(device_id, None)
voltha = VolthaCtrl(self.VOLTHA_HOST,
rest_port = self.VOLTHA_REST_PORT,
uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP)
time.sleep(10)
switch_map = None
olt_configured = False
switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE)
log_test.info('Installing OLT app')
OnosCtrl.install_app(self.olt_app_file)
time.sleep(5)
log_test.info('Adding subscribers through OLT app')
self.config_olt(switch_map)
olt_configured = True
time.sleep(5)
thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,))
thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,))
thread3 = threading.Thread(target = self.voltha.pause_device, args = (device_id,))
thread1.start()
thread2.start()
thread3.start()
time.sleep(10)
thread1.join()
thread2.join()
thread3.join()
dhcp_flow_status = self.success
try:
assert_equal(dhcp_flow_status, True)
time.sleep(10)
finally:
self.voltha.disable_device(device_id, delete = True)
self.remove_olt(switch_map)
df.callback(0)
reactor.callLater(0, dhcp_flow_check_scenario, df)
return df
def test_3_subscribers_with_voltha_for_dhcp_discover_requests(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (3 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 3
num_channels = 1
services = ('DHCP')
cbs = (self.dhcp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_5_subscribers_with_voltha_for_dhcp_discover_requests(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (5 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 5
num_channels = 1
services = ('DHCP')
cbs = (self.dhcp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_9_subscribers_with_voltha_for_dhcp_discover_requests(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (9 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 9 subscribers browsing 1 channels each"""
num_subscribers = 9
num_channels = 1
services = ('DHCP')
cbs = (self.dhcp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_3_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (3 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 3
num_channels = 1
services = ('TLS','DHCP')
cbs = (self.tls_flow_check, self.dhcp_flow_check, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_5_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (5 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 5
num_channels = 1
services = ('TLS','DHCP')
cbs = (self.tls_flow_check, self.dhcp_flow_check, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_9_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (9 subscribers)
3. Send dhcp request from residential subscrber to dhcp server which is running as onos app.
4. Verify that subscriber get ip from dhcp server successfully.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 9
num_channels = 1
services = ('TLS','DHCP')
cbs = (self.tls_flow_check, self.dhcp_flow_check, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcpRelay_request(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscrber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server successfully.
"""
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_broadcast_source_mac(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac broadcast from residential subscrber to external dhcp server.
4. Verify that subscriber should not get ip from external dhcp server.
"""
@deferred(TESTCASE_TIMEOUT)
def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_multicast_source_mac(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac multicast from residential subscrber to external dhcp server.
4. Verify that subscriber should not get ip from external dhcp server.
"""
def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_with_invalid_source_mac(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with invalid source mac zero from residential subscrber to external dhcp server.
4. Verify that subscriber should not get ip from external dhcp server.
"""
def test_subscriber_with_voltha_for_dhcpRelay_dhcp_request_and_release(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscrber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server successfully.
5. Send dhcp release from residential subscrber to external dhcp server.
6 Verify that subscriber should not get ip from external dhcp server, ping to gateway.
"""
def test_subscriber_with_voltha_for_dhcpRelay_starvation(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Repeat step 3 and 4 for 10 times.
6 Verify that subscriber should get ip from external dhcp server..
"""
def test_subscriber_with_voltha_for_dhcpRelay_starvation_negative_scenario(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber without of pool ip to external dhcp server.
4. Verify that subscriber should not get ip from external dhcp server..
5. Repeat steps 3 and 4 for 10 times.
6 Verify that subscriber should not get ip from external dhcp server..
"""
def test_subscriber_with_voltha_for_dhcpRelay_sending_multiple_discover(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Repeat step 3 for 50 times.
6 Verify that subscriber should get same ip which was received from 1st discover from external dhcp server..
"""
def test_subscriber_with_voltha_for_dhcpRelay_sending_multiple_request(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Send DHCP request to external dhcp server.
6. Repeat step 5 for 50 times.
7. Verify that subscriber should get same ip which was received from 1st discover from external dhcp server..
"""
def test_subscriber_with_voltha_for_dhcpRelay_requesting_desired_ip_address(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired ip address from residential subscriber to external dhcp server.
4. Verify that subscriber get ip which was requested in step 3 from external dhcp server. successfully.
"""
def test_subscriber_with_voltha_for_dhcpRelay_requesting_desired_out_of_pool_ip_address(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired out of pool ip address from residential subscriber to external dhcp server.
4. Verify that subscriber should not get ip which was requested in step 3 from external dhcp server., and its offered only within dhcp pool of ip.
"""
def test_subscriber_with_voltha_for_dhcpRelay_deactivating_dhcpRelay_app_in_onos(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Deactivate dhcp server app in onos.
6. Repeat step 3.
7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway.
"""
def test_subscriber_with_voltha_for_dhcpRelay_renew_time(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Send dhcp renew packet to external dhcp server.
6. Repeat step 4.
"""
def test_subscriber_with_voltha_for_dhcpRelay_rebind_time(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Send dhcp rebind packet to external dhcp server.
6. Repeat step 4.
"""
def test_subscriber_with_voltha_for_dhcpRelay_disable_olt_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway.
"""
def test_subscriber_with_voltha_for_dhcpRelay_toggling_olt_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Disable olt devices which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway.
8. Enable olt devices which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
def test_subscriber_with_voltha_for_dhcpRelay_disable_onu_port_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway.
"""
def test_subscriber_with_voltha_for_dhcpRelay_disable_enable_onu_port_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from residential subscriber to external dhcp server.
4. Verify that subscriber get ip from external dhcp server. successfully.
5. Disable onu port which is being detected in voltha CLI.
6. Repeat step 3.
7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway.
8. Enable onu port which is being detected in voltha CLI.
9. Repeat steps 3 and 4.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_discover(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got different ips from external dhcp server. successfully.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_multiple_discover(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Repeat step 3 and 4 for 10 times for both subscribers.
6 Verify that subscribers should get same ips which are offered the first time from external dhcp server..
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_multiple_discover_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber.
6 Verify that subscriber should get same ip which is offered the first time from external dhcp server. and other subscriber ping to gateway should not failed
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_discover_desired_ip_address_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from one residential subscriber to external dhcp server.
3. Send dhcp request with desired ip from other residential subscriber to external dhcp server.
4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from external dhcp server. successfully.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_discover_in_range_and_out_of_range_from_dhcp_pool_ip_addresses(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to external dhcp server.
3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to external dhcp server.
4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from external dhcp server. successfully.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_disable_onu_port_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Disable onu port on which access one subscriber and ping to gateway from other subscriber.
6. Repeat step 3 and 4 for one subscriber where uni port is down.
7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_toggle_onu_port_for_one_subscriber(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Disable onu port on which access one subscriber and ping to gateway from other subscriber.
6. Repeat step 3 and 4 for one subscriber where uni port is down.
7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed.
8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber.
9. Repeat step 3 and 4 for one subscriber where uni port is up now.
10. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_disable_olt_detected_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Disable the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_toggle_olt_detected_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Disable the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed.
8. Enable the olt device which is detected in voltha.
9. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed.
"""
def test_two_subscribers_with_voltha_for_dhcpRelay_pause_olt_detected_in_voltha(self):
"""
Test Method:
0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Send dhcp request from two residential subscribers to external dhcp server.
4. Verify that subscribers had got ip from external dhcp server. successfully.
5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber.
6. Pause the olt device which is detected in voltha.
7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed.
"""
def test_subscriber_with_voltha_for_igmp_join_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA.
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_leave_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA.
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU.
6. Verify that multicast data packets are being recieved on join received uni port on ONU to cord-tester.
7. Send igmp leave for a multicast group address multi-group-addressA.
8. Verify that multicast data packets are not being recieved on leave sent uni port on ONU to cord-tester.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_leave_and_again_join_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA.
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU.
6. Verify that multicast data packets are being recieved on join received uni port on ONU to cord-tester.
7. Send igmp leave for a multicast group address multi-group-addressA.
8. Verify that multicast data packets are not being recieved on leave sent uni port on ONU to cord-tester.
9. Repeat steps 4 to 6.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_2_groups_joins_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for multicast group addresses multi-group-addressA,multi-group-addressB
5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU.
6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 1
num_channels = 2
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_2_groups_joins_and_leave_for_one_group_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for multicast group addresses multi-group-addressA,multi-group-addressB
5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU.
6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send igmp leave for a multicast group address multi-group-addressA.
8. Verify that multicast data packets of group(multi-group-addressA) are not being recieved on leave sent uni port on ONU to cord-tester.
9. Verify that multicast data packets of group (multi-group-addressB) are being recieved on join sent uni port on ONU to cord-tester.
"""
"""Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each"""
num_subscribers = 1
num_channels = 2
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs,
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_join_different_group_src_list_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU.
8. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check, None, None)
self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'],
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_change_to_exclude_mcast_group_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send igmp joins for a multicast group address multi-group-addressA with exclude source list src_listA
8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
9. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
num_subscribers = 1
num_channels = 2
services = ('IGMP')
cbs = (self.igmp_flow_check_join_change_to_exclude, None, None)
self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'],
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_change_to_include_back_from_exclude_mcast_group_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are not being recieved on join sent uni port on ONU to cord-tester.
7. Send igmp joins for a multicast group address multi-group-addressA with allow source list src_listA
8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
9. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check_join_change_to_exclude_again_include_back, None, None)
self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'],
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_change_to_block_src_list_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send igmp joins for a multicast group address multi-group-addressA with block source list src_listA
8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
9. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check_join_change_to_block, None, None)
self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'],
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_allow_new_src_list_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send igmp joins for a multicast group address multi-group-addressA with allow new source list src_listB
8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU.
9. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
num_subscribers = 1
num_channels = 1
services = ('IGMP')
cbs = (self.igmp_flow_check_join_change_to_block_again_allow_back, None, None)
self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'],
num_subscribers = num_subscribers,
num_channels = num_channels)
def test_subscriber_with_voltha_for_igmp_include_empty_src_list_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are not being recieved on join sent uni port on ONU to cord-tester.
7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU.
8. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
def test_subscribers_with_voltha_for_igmp_exclude_empty_src_list_and_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA
5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU.
6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester.
7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU.
8. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_join_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressB from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_join_leave_for_one_subscriber_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Send igmp leave for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_leave_join_for_one_subscriber_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp leave for a multicast group address multi-group-addressB from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast group adress (multi-group-addressA) data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast group adress (multi-group-addressB) data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Send igmp join for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
10. Verify that multicast of group (multi-group-addressA) data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast of group (multi-group-addressA) data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
12. Verify that multicast of group (multi-group-addressB) data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_with_uni_port_down_for_one_subscriber_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Disable uni_2 port which is being shown on voltha CLI.
10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_toggling_uni_port_for_one_subscriber_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Disable uni_2 port which is being shown on voltha CLI.
10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
12. Enable uni_2 port which we disable at step 9.
13. Repeat step 5,6 and 8.
"""
def test_two_subscribers_with_voltha_for_igmp_disabling_olt_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Disable olt device which is being shown on voltha CLI.
10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_pausing_olt_and_verifying_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Pause olt device which is being shown on voltha CLI.
10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
"""
def test_two_subscribers_with_voltha_for_igmp_toggling_olt_and_verify_traffic(self):
"""
Test Method:
0. Make sure that voltha is up and running on CORD-POD setup.
1. OLT and ONU is detected and validated.
2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber..
3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity.
4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port)
5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port)
6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU.
7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester.
8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester.
9. Disable olt device which is being shown on voltha CLI.
10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester.
11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester.
12. Enable olt device which is disable at step 9.
13. Repeat steps 4,5, 7 and 8.
"""