blob: 333c34eea6c91500e4703ec45708576c2170e70e [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
node ("${TestNodeName}") {
timeout (100) {
try {
stage ("Parse deployment configuration file") {
sh returnStdout: true, script: "rm -rf helm-charts helm-repo-tools ${configBaseDir}"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-charts"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
}
stage('Clean up') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
do
echo "Purging chart: \${hchart}"
helm delete --purge "\${hchart}"
done
"""
timeout(5) {
waitUntil {
helm_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
"""
return helm_deleted.toInteger() == 0
}
}
timeout(5) {
dir ("helm-charts") {
stage("Cleanup SR-IOV CNI and SR-IOV Network Device Plugin") {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
kubectl delete -f mcord/cni-config/05-sriov-device-plugin.yaml || true
kubectl delete -f mcord/cni-config/04-sriov-device-plugin-configmap.yaml || true
kubectl delete -f mcord/cni-config/03-network-definition.yaml || true
kubectl delete -f mcord/cni-config/02-network-crd.yaml || true
kubectl delete -f mcord/cni-config/01-cni-service-account.yaml || true
"""
}
}
}
timeout(5) {
waitUntil {
kubectl_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet|test' | wc -l
"""
return kubectl_deleted.toInteger() == 0
}
}
}
}
stage('Add Helm repositories') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm init --upgrade --force-upgrade
helm repo add cord https://charts.opencord.org
helm repo add incubator http://storage.googleapis.com/kubernetes-charts-incubator
helm repo update
"""
timeout(1) {
waitUntil {
tillerpod_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl -n kube-system get pods | grep tiller-deploy | grep Running | wc -l
"""
return tillerpod_running.toInteger() == 1
}
}
timeout(1) {
waitUntil {
cord_repo_present = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm repo list | grep cord | wc -l
"""
return cord_repo_present.toInteger() == 1
}
}
}
stage('Install etcd-cluster') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --version 0.8.3 -n etcd-operator stable/etcd-operator
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcdNodePort=32379 -n etcd cord/etcd-cluster
"""
}
timeout(10) {
waitUntil {
etcd_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep etcd | grep -i running | grep 1/1 | wc -l
"""
return etcd_running.toInteger() == 6
}
}
}
dir ("helm-charts") {
stage('Install SR-IOV CNI and SR-IOV Network Device Plugin') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
kubectl apply -f mcord/cni-config/02-network-crd.yaml
kubectl apply -f mcord/cni-config/
sleep 5
"""
}
}
// In current development progress, we prefered to keep this for testing eNodeB's functionality
if ( params.installEpcControlPlane ) {
stage("Install M-CORD Control Plane Services") {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -n mcord-control-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-control-plane
"""
}
}
stage("Install M-CORD Data Plane Services") {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -n mcord-data-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-data-plane
"""
}
stage('Install CORD Kafka') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install --version 0.8.8 --set configurationOverrides."offsets\\.topic\\.replication\\.factor"=1 --set configurationOverrides."log\\.retention\\.hours"=4 --set configurationOverrides."log\\.message\\.timestamp\\.type"="LogAppendTime" --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false -n cord-kafka incubator/kafka
"""
}
timeout(10) {
waitUntil {
kafka_instances_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l
"""
return kafka_instances_running.toInteger() == 2
}
}
}
// stage('Install Logging Infrastructure') {
// timeout(10) {
// sh returnStdout: true, script: """
// export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
// helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set elasticsearch.cluster.env.MINIMUM_MASTER_NODES="1" --set elasticsearch.client.replicas=1 --set elasticsearch.master.replicas=2 --set elasticsearch.master.persistence.enabled=false --set elasticsearch.data.replicas=1 --set elasticsearch.data.persistence.enabled=false -n logging cord/logging
// helm-repo-tools/wait_for_pods.sh
// """
// }
// }
// stage('Install Monitoring Infrastructure') {
// timeout(10) {
// sh returnStdout: true, script: """
// export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
// helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n nem-monitoring cord/nem-monitoring
// helm-repo-tools/wait_for_pods.sh
// """
// }
// }
stage('Install ONOS') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -n onos -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/onos --version 1.1.0
"""
}
timeout(10) {
waitUntil {
onos_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i onos | grep -i running | grep 2/2 | wc -l
"""
return onos_completed.toInteger() == 1
}
}
}
stage('Install xos-core') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core cord/xos-core --version 2.3.3
"""
}
timeout(10) {
waitUntil {
xos_core_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
"""
return xos_core_completed.toInteger() == 6
}
}
}
stage('Install M-CORD Profile') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n mcord cord/mcord
"""
}
timeout(10) {
waitUntil {
tosca_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i mcord-tosca-loader | grep -i completed | wc -l
"""
return tosca_completed.toInteger() == 1
}
}
}
// SEBA Begin
stage('Install SEBA Profile') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n seba cord/seba-services --set fabric.enabled=false --set onos-service.enabled=false --version 1.0.5
"""
}
timeout(10) {
waitUntil {
tosca_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i seba-services-tosca-loader | grep -i completed | wc -l
"""
return tosca_completed.toInteger() == 1
}
}
}
stage('Install base-kubernetes') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n base-kubernetes cord/base-kubernetes --version 1.0.2
"""
}
timeout(10) {
waitUntil {
base_kubernetes_tosca_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i base-kubernetes-tosca-loader | grep -i completed | wc -l
"""
return base_kubernetes_tosca_running.toInteger() == 1
}
}
}
stage('Install att workflow') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set att-workflow-driver.kafkaService=cord-kafka -n att-workflow --version 1.0.2 cord/att-workflow
"""
}
timeout(10) {
waitUntil {
att_workflow_tosca_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i att-workflow-tosca-loader | grep -i completed | wc -l
"""
return att_workflow_tosca_completed.toInteger() == 1
}
}
}
stage('Install voltha') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -n voltha -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/voltha --set etcd.cluster.enabled=false --version 1.0.3
"""
}
timeout(10) {
waitUntil {
voltha_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l
"""
return voltha_completed.toInteger() == 8
}
}
}
// SEBA end
if ( params.configurePod ) {
dir ("${configBaseDir}/${configToscaDir}/mcord") {
stage('Configure MCORD - Fabric') {
timeout(1) {
waitUntil {
out_fabric = sh returnStdout: true, script: """
curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_fabric.toInteger() == 1
}
}
}
}
dir ("${configBaseDir}/${configToscaDir}/att-workflow") {
stage('Configure SEBA - Fabric and whitelist') {
timeout(1) {
waitUntil {
out_fabric = sh returnStdout: true, script: """
curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_fabric.toInteger() == 1
}
}
}
stage('Configure SEBA - Subscriber') {
timeout(1) {
waitUntil {
out_subscriber = sh returnStdout: true, script: """
curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_subscriber.toInteger() == 1
}
}
}
stage('Configure SEBA - OLT') {
timeout(1) {
waitUntil {
out_olt = sh returnStdout: true, script: """
curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_olt.toInteger() == 1
}
}
}
}
}
currentBuild.result = 'SUCCESS'
} catch (err) {
currentBuild.result = 'FAILURE'
step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
}
echo "RESULT: ${currentBuild.result}"
}
}