blob: 1dd27afd74a4cc0ec102d7ae4e5c3c4d79c03e83 [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
node ("${TestNodeName}") {
timeout (100) {
try {
stage ("Parse deployment configuration file") {
sh returnStdout: true, script: "rm -rf ${configBaseDir} helm-repo-tools"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
}
stage('Clean up') {
timeout(10) {
sh returnStdout: true, script: """
rm -rf cord-tester
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
do
echo "Purging chart: \${hchart}"
helm delete --purge "\${hchart}"
done
"""
timeout(5) {
waitUntil {
helm_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
"""
return helm_deleted.toInteger() == 0
}
}
timeout(5) {
waitUntil {
kubectl_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
"""
return kubectl_deleted.toInteger() == 0
}
}
}
}
stage('Add CORD repository') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm repo add cord https://charts.opencord.org
helm repo update
"""
timeout(1) {
waitUntil {
cord_repo_present = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm repo list | grep cord | wc -l
"""
return cord_repo_present.toInteger() == 1
}
}
}
stage('Install CORD Platform') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n cord-platform --version 6.1.0 cord/cord-platform
"""
timeout(1) {
waitUntil {
cord_helm_installed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls | grep -i cord-platform | wc -l
"""
return cord_helm_installed.toInteger() == 1
}
}
}
stage('Wait for etcd-operator to be installed') {
timeout(10) {
waitUntil {
etcd_operator_installed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i etcd-operator | grep -i running | wc -l
"""
crd_present = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get crd | grep -i etcd | wc -l
"""
return etcd_operator_installed + crd_present.toInteger() == 6
}
}
}
stage('Install SEBA Profile') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n seba --version 1.0.0 cord/seba
"""
timeout(1) {
waitUntil {
seba_helm_installed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls | grep -i seba | wc -l
"""
return seba_helm_installed.toInteger() == 1
}
}
}
stage('Install ATT workflow') {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n att-workflow --version 1.0.0 cord/att-workflow
"""
timeout(1) {
waitUntil {
attworkflow_helm_installed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls | grep -i att-workflow | wc -l
"""
return attworkflow_helm_installed.toInteger() == 1
}
}
}
stage('Check containers are running') {
timeout(20) {
waitUntil {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm-repo-tools/wait_for_pods.sh
"""
pods_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods --all-namespaces | grep -i completed | grep -E -v 'docker-registry|mavenrepo|ponnet|kube-system' | wc -l
"""
return pods_completed.toInteger() == 3
}
}
}
if ( params.reinstallOlt ) {
stage('Reinstall OLT software') {
for(int i=0; i < deployment_config.olts.size(); i++) {
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
"""
timeout(5) {
waitUntil {
olt_sw_present = sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
"""
return olt_sw_present.toInteger() == 0
}
}
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
"""
timeout(5) {
waitUntil {
olt_sw_present = sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
"""
return olt_sw_present.toInteger() == 1
}
}
// If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
"""
}
}
}
stage('Restart OLT processes') {
for(int i=0; i < deployment_config.olts.size(); i++) {
timeout(5) {
sh returnStdout: true, script: """
ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &'
sleep 5
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &'
"""
}
timeout(15) {
waitUntil {
onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state: up\" | wc -l'"
return onu_discovered.toInteger() > 0
}
}
}
}
}
if ( params.configurePod ) {
dir ("${configBaseDir}/${configToscaDir}/att-workflow") {
stage('Configure R-CORD - Fabric and whitelist') {
timeout(1) {
waitUntil {
out_fabric = sh returnStdout: true, script: """
curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_fabric.toInteger() == 1
}
}
}
stage('Configure R-CORD - Subscriber') {
timeout(1) {
waitUntil {
out_subscriber = sh returnStdout: true, script: """
curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_subscriber.toInteger() == 1
}
}
}
stage('Configure R-CORD - OLT') {
timeout(1) {
waitUntil {
out_olt = sh returnStdout: true, script: """
curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_olt.toInteger() == 1
}
}
}
}
}
if ( params.installBBSim ) {
dir ("helm-charts") {
stage('Install BBSim') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n bbsim bbsim --set onus_per_pon_port=${onuNumber}
"""
}
timeout(10) {
waitUntil {
base_kubernetes_tosca_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods -n voltha | grep -i bbsim | wc -l
"""
return base_kubernetes_tosca_running.toInteger() == 1
}
}
}
}
dir ("${configBaseDir}/${configToscaDir}/bbsim") {
stage('Configure BBSim - OLT') {
timeout(1) {
waitUntil {
out_olt = sh returnStdout: true, script: """
curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @bbsim-16.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
"""
return out_olt.toInteger() == 1
}
}
}
}
}
currentBuild.result = 'SUCCESS'
} catch (err) {
currentBuild.result = 'FAILURE'
step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
}
echo "RESULT: ${currentBuild.result}"
}
}