blob: 28d3e57c3344d9fe8413fb8fd70093f3111b7fe8 [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
PROFILE="null"
CORE_CONTAINER="null"
node ('ubuntu16.04-basebuild-4c-8g') {
stage('Config') {
sh """
rm -rf ~/cord/
rm -rf ~/cord_profile
rm -rf /opt/cord
rm -rf /opt/cord_profile
rm -rf /opt/credentials
rm -rf /opt/images
rm -rf /opt/pki
rm -rf ~/.repo/
mkdir ~/cord && cd ~/cord/
repo init -u https://gerrit.opencord.org/manifest -b $GERRIT_BRANCH
repo sync
repo download $GERRIT_PROJECT $GERRIT_CHANGE_NUMBER/$GERRIT_PATCHSET_NUMBER
"""
}
try {
stage('Build') {
sh """
if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
PROFILE=rcord-local.yml
fi
if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
PROFILE=ecord-local.yml
fi
if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
PROFILE=mcord-ng40-local.yml
fi
if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
PROFILE=mcord-cavium-local.yml
fi
cd ~/cord/build/
make PODCONFIG=\$PROFILE config
make -j4 build
"""
}
stage('Setup') {
try {
sh """
if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
CORE_CONTAINER=rcord_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
CORE_CONTAINER=ecord_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
CORE_CONTAINER=mcordng40_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
CORE_CONTAINER=mcordcavium_xos_core_1
fi
cd ~/cord/test/cord-tester/src/test/cord-api/Properties/
sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'127.0.0.1\'/\" RestApiProperties.py
sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'9101\'/\" RestApiProperties.py
sed -i \"s/^\\(PASSWD = \\).*/\\1\'\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)\'/\" RestApiProperties.py
docker cp ~/cord/test/cord-tester/src/test/cord-api/Tests/targets/xosapitests.xtarget \$CORE_CONTAINER:/opt/xos/lib/xos-genx/xosgenx/targets/xosapitests.xtarget
docker exec -i \$CORE_CONTAINER /bin/bash -c "xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/core/models/core.xproto" > ~/cord/test/cord-tester/src/test/cord-api/Tests/XOSCoreAPITests.robot
SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
export testname=_service_api.robot
for i in \$SERVICES; do bash -c "docker exec -i \$CORE_CONTAINER /bin/bash -c 'xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/dynamic_services/\$i/\$i.xproto'" > ~/cord/test/cord-tester/src/test/cord-api/Tests/\$i\$testname; done
"""
}
catch(error) { currentBuild.result = 'FAILURE' }
}
stage('Test') {
try {
sh """
if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
CORE_CONTAINER=rcord_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
CORE_CONTAINER=ecord_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
CORE_CONTAINER=mcordng40_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
CORE_CONTAINER=mcordcavium_xos_core_1
fi
cd ~/cord/test/cord-tester/src/test/cord-api/Tests
export testname=_service_api.robot
SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
echo \$SERVICES
pybot -d Log -T -e TenantWithContainer -e Port -e ControllerImages -e ControllerNetwork -e ControllerSlice XOSCoreAPITests.robot || true
for i in \$SERVICES; do bash -c "pybot -d Log -T -e AddressManagerServiceInstance -v xos_service:\$i \$i\$testname"; done || true
"""
}
catch(error) { currentBuild.result = 'FAILURE' }
}
stage('Publish') {
try {
sh """
if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs
cp -r ~/cord/test/cord-tester/src/test/cord-api/Tests/Log/*ml ./RobotLogs
"""
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/report*.html',
unstableThreshold: 0]);
}catch(error) {}
}
}
finally {
step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "kailash@opennetworking.org", sendToIndividuals: false])
}
}