| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| node ("${TestNodeName}") { |
| timeout (100) { |
| try { |
| stage ("Parse deployment configuration file") { |
| sh returnStdout: true, script: 'rm -rf ${configRepoBaseDir}' |
| sh returnStdout: true, script: 'git clone -b ${branch} ${configRepoUrl}' |
| deployment_config = readYaml file: "${configRepoBaseDir}${configRepoFile}" |
| } |
| stage('Clean up') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| for hchart in \$(helm list -q); |
| do |
| echo "Purging chart: \${hchart}" |
| helm delete --purge "\${hchart}" |
| done |
| """ |
| timeout(5) { |
| waitUntil { |
| helm_deleted = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| helm ls | wc -l |
| """ |
| return helm_deleted.toInteger() == 0 |
| } |
| } |
| timeout(5) { |
| waitUntil { |
| kubectl_deleted = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods --all-namespaces --no-headers | grep -v kube-system | wc -l |
| """ |
| return kubectl_deleted.toInteger() == 0 |
| } |
| } |
| } |
| } |
| dir ("helm-charts") { |
| stage('Install Voltha Kafka') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| kafka_instances_running = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep voltha-kafka | grep -i running | grep 1/1 | wc -l |
| """ |
| return kafka_instances_running.toInteger() == 2 |
| } |
| } |
| } |
| stage('Install voltha') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/ |
| helm dep build voltha |
| helm install -n voltha --set etcd-operator.customResources.createEtcdClusterCRD=false voltha |
| helm upgrade --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| voltha_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l |
| """ |
| return voltha_completed.toInteger() == 11 |
| } |
| } |
| } |
| stage('Install ONOS-Voltha') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm install -n onos-voltha -f configs/onos-voltha.yaml onos |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| onos_voltha_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods -n voltha | grep -i onos-voltha | grep -i running | grep 1/1 | wc -l |
| """ |
| return onos_voltha_completed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Install ONOS-Fabric') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm install -n onos-fabric -f configs/onos-fabric.yaml onos |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| onos_fabric_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep -i onos-fabric | grep -i running | grep 1/1 | wc -l |
| """ |
| return onos_fabric_completed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Install xos-core') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm dep update xos-core |
| helm install -n xos-core xos-core |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| xos_core_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l |
| """ |
| return xos_core_completed.toInteger() == 7 |
| } |
| } |
| } |
| stage('Install rcord-lite') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm dep update xos-profiles/rcord-lite |
| helm install -n rcord-lite xos-profiles/rcord-lite |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| rcord_tosca_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep -i tosca-loader | grep -i completed | wc -l |
| """ |
| return rcord_tosca_completed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Install CORD Kafka') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm install --name cord-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| kafka_instances_running = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l |
| """ |
| return kafka_instances_running.toInteger() == 2 |
| } |
| } |
| } |
| stage('Install hippie-oss') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| helm install -n hippie-oss xos-services/hippie-oss |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| hippie_oss_running = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} && |
| kubectl get pods | grep -i hippie-oss | grep -i running | grep 1/1 | wc -l |
| """ |
| return hippie_oss_running.toInteger() == 1 |
| } |
| } |
| } |
| } |
| stage('Reinstall OLT software') { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16' |
| """ |
| timeout(5) { |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l' |
| """ |
| return olt_sw_present.toInteger() == 0 |
| } |
| } |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}" |
| """ |
| timeout(5) { |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l' |
| """ |
| return olt_sw_present.toInteger() == 1 |
| } |
| } |
| // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded |
| if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') { |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh' |
| """ |
| } |
| } |
| } |
| stage('Restart OLT processes') { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| timeout(5) { |
| sh returnStdout: true, script: """ |
| ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill bal_core_dist' || true |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill openolt' || true |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/bal.log' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/openolt.log' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./bal_core_dist -C :55001 < /dev/tty1 > ./bal.log 2>&1 &' |
| sleep 5 |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./openolt -C 127.0.0.1:55001 < /dev/tty1 > ./openolt.log 2>&1 &' |
| """ |
| } |
| timeout(15) { |
| waitUntil { |
| onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /broadcom/openolt.log | grep \"oper_state:up\" | wc -l'" |
| return onu_discovered.toInteger() > 0 |
| } |
| } |
| } |
| } |
| stage('Download cord-tester repo') { |
| timeout(2) { |
| sh returnStdout: true, script: """ |
| rm -rf cord-tester |
| git clone -b ${branch} https://gerrit.opencord.org/cord-tester |
| """ |
| } |
| } |
| stage('Validate installed PODs') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| cd cord-tester/src/test/robot/ |
| rm -rf Log/ || true |
| pybot -d Log -T SanityK8POD.robot || true |
| """ |
| } |
| } |
| stage('Configurations and Tests') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| cd cord-tester/src/test/cord-api/Properties/ |
| sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'${deployment_config.node1.ip}\'/\" RestApiProperties.py |
| sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'30006\'/\" RestApiProperties.py |
| sed -i \"s/^\\(XOS_USER = \\).*/\\1\'admin@opencord.org\'/\" RestApiProperties.py |
| sed -i \"s/^\\(XOS_PASSWD = \\).*/\\1\'letmein\'/\" RestApiProperties.py |
| cd cord-tester/src/test/cord-api/Tests/ |
| rm -rf Log/ || true |
| pybot -d Log -T FabricConfig.txt || true |
| pybot -d Log -T HippieOSS.txt || true |
| sleep 5 |
| pybot -d Log -T OSSVolt.txt || true |
| pybot -d Log -T RealOLT_Test.txt || true |
| """ |
| } |
| } |
| stage('Subscriber Validation and Ping Tests') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/pod-configs/kubernetes-configs/${deployment_config.kube_config} |
| cd cord-tester/src/test/cord-api/Tests/ |
| pybot -d Log -T HippieOSS_instances.txt || true |
| pybot -d Log -T -v src_ip:${deployment_config.srcHost.ip} -v src_user:${deployment_config.srcHost.user} -v src_pass:${deployment_config.srcHost.pass} -v dst_user:${deployment_config.dstHost.user} -v dst_pass:${deployment_config.dstHost.pass} -v dst_ip:${deployment_config.dstHost.ip} -v dst_host_ip:${deployment_config.dstHost.hostIp} -v src_gateway:${deployment_config.srcHost.gateway} -v dst_gateway:${deployment_config.dstHost.gateway} -v init_state:awaiting-auth -v INITIAL_STATUS:FAIL -v ENABLE_STATUS:FAIL -v MACIP_STATUS:PASS Subscriber_StatusChecks.txt || true |
| """ |
| } |
| } |
| stage('Publish test results') { |
| sh returnStdout: true, script: """ |
| if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs; |
| mkdir RobotLogs/TestDoc || true |
| cp -r cord-tester/src/test/robot/Log/* ./RobotLogs || true |
| cp -r cord-tester/src/test/cord-api/Tests/Log/* ./RobotLogs || true |
| """ |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log*.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output*.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/report*.html', |
| unstableThreshold: 0 |
| ]) |
| } |
| currentBuild.result = 'SUCCESS' |
| } catch (err) { |
| currentBuild.result = 'FAILURE' |
| step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false]) |
| } |
| echo "RESULT: ${currentBuild.result}" |
| } |
| } |