| *** Settings *** |
| Library KafkaLibrary |
| Library RequestsLibrary |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library CORDRobot |
| Library ImportResource resources=CORDRobot |
| Suite Setup Setup |
| Suite Teardown Teardown |
| Test Template Send Event and Verify |
| |
| *** Variables *** |
| ${server_ip} xos-chameleon |
| ${server_port} 30006 |
| ${subscriber_api} /xosapi/v1/rcord/rcordsubscribers |
| ${att_wf_api} /xosapi/v1/att-workflow-driver/attworkflowdriverservices |
| ${volt_api} /xosapi/v1/volt/voltservices |
| ${att_si_api} /xosapi/v1/att-workflow-driver/attworkflowdriverserviceinstances |
| ${att_whitelist_api} /xosapi/v1/att-workflow-driver/attworkflowdriverwhitelistentries |
| ${onu_device_api} /xosapi/v1/volt/onudevices |
| ${olt_api} /xosapi/v1/volt/oltdevices |
| ${pon_ports_api} /xosapi/v1/volt/ponports |
| ${uni_ports_api} /xosapi/v1/volt/uniports |
| ${onu_serial_no} onudevice123 |
| ${onu_invalid_sn} invalid_serial_no |
| ${deviceId} of:robot_test |
| ${ponportno} 10 |
| ${uniportno} 100 |
| ${mac_address} 00:AA:00:00:00:01 |
| ${ip_address} 192.168.3.5 |
| |
| *** Test Cases *** |
| Activate Non-Whitelisted ONU onu.events {'status': 'activated', 'serial_number': '${onu_invalid_sn}','uni_port_id': 100, 'of_dpid': '${deviceId}'} onu_serial_number=${onu_invalid_sn} onu_state=DISABLED |
| [Documentation] Validate that activating an ONU not in whitelist sets onu device to DISABLED |
| |
| Activate Whitelisted ONU in Wrong Location onu.events {'status': 'activated', 'serial_number': '${onu_serial_no}','uni_port_id': 52, 'of_dpid': 'wrongofdpid'} onu_serial_number=${onu_serial_no} onu_state=DISABLED |
| [Documentation] Validate that activating an ONU in the whitelist but in the wrong location DISABLES the onu device |
| |
| Activate Whitelisted ONU onu.events {'status': 'activated', 'serial_number': '${onu_serial_no}','uni_port_id': ${uniportno}, 'of_dpid': '${deviceId}'} onu_serial_number=${onu_serial_no} onu_state=ENABLED |
| [Documentation] Validate that activating an ONU in the whitelist creates a attworkflow-driver-serviceinstance |
| |
| Send Auth Request authentication.events {'authenticationState': 'APPROVED', 'deviceId': '${deviceId}','portNumber': ${uniportno}} onu_serial_number=${onu_serial_no} subscriber_state=enabled service_instance_state=APPROVED service_instance_count=1 service_instance_dhcp_state=AWAITING |
| [Documentation] Validate that sending an auth request to the onu will enable the subscriber and create a service chain |
| |
| Send DHCP Request dhcp.events {'macAddress': '${mac_address}','ipAddress': '${ip_address}', 'deviceId': '${deviceId}', 'portNumber': ${uniportno}, 'messageType': 'DHCPACK'} onu_serial_number=${onu_serial_no} service_instance_state=APPROVED service_instance_dhcp_state=DHCPACK |
| [Documentation] Validate that sending an dhcp request to update the subscriber's mac+ip address |
| |
| Send Denied Auth Request authentication.events {'authenticationState': 'DENIED', 'deviceId': '${deviceId}','portNumber': ${uniportno}} onu_serial_number=${onu_serial_no} subscriber_state=auth-failed service_instance_state=DENIED service_instance_dhcp_state=DHCPACK |
| [Documentation] Validate that denied auth request to the onu will disable the subscriber and remove a service chain |
| |
| Create New Whitelist Entry |
| [Documentation] Validate that creating a new whitelist entry for the "invalid" onu device will enable the onu |
| [Template] None |
| ${resp}= CORD Post ${att_whitelist_api} {"serial_number": "${onu_invalid_sn}", "device_id": "${deviceId}", "pon_port_id": ${ponportno}, "owner_id": ${attworkflowservice_id}} |
| ${whitelist_entry2_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${whitelist_entry2_id} |
| Wait Until Keyword Succeeds 30s 5s Validate ONU Device Status ${onu_invalid_sn} ENABLED |
| |
| Remove Whitelist Entry |
| [Documentation] Validate that removing a whitelist entry for an onu device will disable the subscriber and remove it's service chain |
| [Template] None |
| CORD Delete /xosapi/v1/att-workflow-driver/attworkflowdriverwhitelistentries ${whitelist_entry_id} |
| Wait Until Keyword Succeeds 120s 5s Validate Subscriber Status ${onu_serial_no} auth-failed |
| Wait Until Keyword Succeeds 120s 5s Validate Subscriber Service Chain ${onu_serial_no} |
| |
| *** Keywords *** |
| Setup |
| ${cord_kafka}= Get Environment Variable CORD_KAFKA_IP cord-kafka |
| Connect Producer ${cord_kafka}:9092 onu.events |
| Connect Producer ${cord_kafka}:9092 authentication.events |
| Connect Producer ${cord_kafka}:9092 dhcp.events |
| ${auth} = Create List admin@opencord.org letmein |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ${server_ip} http://${server_ip}:${server_port} auth=${AUTH} headers=${HEADERS} |
| Create OLT, ONU, Subscribers, and Whitelists |
| |
| Teardown |
| [Documentation] Delete all models created |
| CORD Get /xosapi/v1/rcord/rcordsubscribers |
| Clean Up Objects ${subscriber_api} |
| Clean Up Objects ${att_si_api} |
| Clean Up Objects ${subscriber_api} |
| Wait Until Keyword Succeeds 60s 1s Clean Up Objects ${olt_api} |
| Clean Up Objects ${att_whitelist_api} |
| |
| Create OLT, ONU, Subscribers, and Whitelists |
| [Documentation] Create two onu devices to be tested for valid/invalid paths |
| ${resp}= CORD Get ${volt_api} |
| ${jsondata}= To Json ${resp.content} |
| ${voltservice}= Get From List ${jsondata['items']} 0 |
| ${voltservice_id}= Get From Dictionary ${voltservice} id |
| ${resp}= CORD Get ${att_wf_api} |
| ${jsondata}= To Json ${resp.content} |
| ${attworkflowservice}= Get From List ${jsondata['items']} 0 |
| ${attworkflowservice_id}= Get From Dictionary ${attworkflowservice} id |
| Set Suite Variable ${attworkflowservice_id} |
| ${resp}= CORD Post ${subscriber_api} {"onu_device": "${onu_serial_no}", "status": "pre-provisioned", "upstream_bps": 1, "downstream_bps": 1, "tech_profile_id": 1} |
| ${subscriber_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${subscriber_id} |
| ${resp}= CORD Post ${olt_api} {"volt_service_id": ${voltservice_id}, "name": "testoltdevice1", "device_type": "ponism", "host": "172.17.0.1", "port": 50060, "switch_port": "1", "dp_id": "${deviceId}", "outer_tpid": "0x8100", "uplink": "128"} |
| ${oltdevice_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${oltdevice_id} |
| ${resp}= CORD Post ${pon_ports_api} {"olt_device_id": ${oltdevice_id}, "port_no": "${ponportno}", "name": "testponport1"} |
| ${ponport_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${ponport_id} |
| ${resp}= CORD Post ${onu_device_api} {"serial_number": "${onu_serial_no}", "pon_port_id": ${ponport_id}, "vendor": "abcdefg"} |
| ${onu_device1_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${onu_device1_id} |
| ${resp}= CORD Post ${uni_ports_api} {"onu_device_id": "${onu_device1_id}", "port_no": ${uniportno}, "name": "testuniport"} |
| ${uni_port_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${uni_port_id} |
| ${resp}= CORD Post ${onu_device_api} {"serial_number": "${onu_invalid_sn}", "pon_port_id": ${ponport_id}, "vendor": "abcdefg"} |
| ${onu_device2_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${onu_device2_id} |
| ${resp}= CORD Post ${att_whitelist_api} {"serial_number": "${onu_serial_no}", "device_id": "${deviceId}", "pon_port_id": ${ponportno}, "owner_id": ${attworkflowservice_id}} |
| ${whitelist_entry_id}= Get From Dictionary ${resp.json()} id |
| Set Suite Variable ${whitelist_entry_id} |
| |
| Send Event and Verify |
| [Arguments] ${topic} ${event} ${onu_serial_number}=${EMPTY} ${onu_state}=${EMPTY} ${subscriber_state}=${EMPTY} ${service_instance_state}=${EMPTY} ${service_instance_count}=${EMPTY} ${service_instance_dhcp_state}=${EMPTY} |
| Send Kafka Event ${topic} ${event} |
| Run Keyword If '${topic}' == 'onu.events' Wait Until Keyword Succeeds 30s 5s Validate ONU Device Status ${onu_serial_number} ${onu_state} |
| Run Keyword If '${topic}' == 'authentication.events' Wait Until Keyword Succeeds 30s 5s Validate Subscriber Status ${onu_serial_number} ${subscriber_state} |
| Run Keyword If '${topic}' == 'authentication.events' Wait Until Keyword Succeeds 30s 5s Validate Subscriber Service Chain ${onu_serial_number} ${service_instance_count} |
| Run Keyword If '${topic}' == 'authentication.events' Wait Until Keyword Succeeds 30s 5s Validate ATT Service Instance ${onu_serial_number} ${service_instance_state} ${service_instance_dhcp_state} |
| Run Keyword If '${topic}' == 'dhcp.events' Wait Until Keyword Succeeds 30s 5s Validate ATT Service Instance ${onu_serial_number} ${service_instance_state} ${service_instance_dhcp_state} |
| Run Keyword If '${topic}' == 'dhcp.events' Wait Until Keyword Succeeds 30s 5s Validate Subscriber Settings ${onu_serial_number} |
| |
| Send Kafka Event |
| [Documentation] Send event |
| [Arguments] ${topic} ${message} |
| Log Sending event |
| ${event}= evaluate json.dumps(${message}) json |
| Send ${topic} ${event} |
| Flush |
| |
| Validate ATT Service Instance |
| [Documentation] Validates the states in the ATT-WF-SI per onu |
| [Arguments] ${serial_no} ${auth_state} ${dhcp_state} |
| ${resp}= CORD Get ${att_si_api} |
| Should Be Equal As Strings ${resp.status_code} 200 |
| ## validate sn exists |
| Should Contain ${resp.content} ${serial_no} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${id}= Get From Dictionary ${value} id |
| \ ${sn}= Get From Dictionary ${value} serial_number |
| \ ${as}= Get From Dictionary ${value} authentication_state |
| \ ${dp}= Get From Dictionary ${value} dhcp_state |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| Should Be Equal ${dp} ${dhcp_state} |
| Should Be Equal ${as} ${auth_state} |
| |
| Validate Subscriber Status |
| [Arguments] ${serial_no} ${expected_status} |
| ${resp}= CORD Get ${subscriber_api} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${status}= Get From Dictionary ${value} status |
| \ ${sn}= Get From Dictionary ${value} onu_device |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| Should Be Equal ${status} ${expected_status} |
| |
| Validate Subscriber Service Chain |
| [Arguments] ${serial_no} ${expected_no_sc}=${EMPTY} |
| ${resp}= CORD Get ${subscriber_api} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${sl}= Get From Dictionary ${value} subscribed_links_ids |
| \ ${result} ${slinks}= Run Keyword And Ignore Error Get From List ${sl} 0 |
| \ ${sn}= Get From Dictionary ${value} onu_device |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| Run Keyword If '${expected_no_sc}' != '${EMPTY}' Should Not Be Equal As Strings ${result} FAIL |
| Run Keyword If '${expected_no_sc}' != '${EMPTY}' Should Not Be Empty ${result} ELSE Should Be Empty ${sl} |
| |
| Validate ONU Device Status |
| [Arguments] ${serial_no} ${expected_status} |
| ${resp}= CORD Get ${onu_device_api} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${status}= Get From Dictionary ${value} admin_state |
| \ ${sn}= Get From Dictionary ${value} serial_number |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| Should Be Equal ${status} ${expected_status} |
| |
| Validate Subscriber Settings |
| [Arguments] ${serial_no} |
| ${resp}= CORD Get ${subscriber_api} |
| ${jsondata}= To Json ${resp.content} |
| Log ${jsondata} |
| ${length}= Get Length ${jsondata['items']} |
| : FOR ${INDEX} IN RANGE 0 ${length} |
| \ ${value}= Get From List ${jsondata['items']} ${INDEX} |
| \ ${macAddress}= Get From Dictionary ${value} mac_address |
| \ ${sn}= Get From Dictionary ${value} onu_device |
| \ Run Keyword If '${sn}' == '${serial_no}' Exit For Loop |
| Should Be Equal ${macAddress} ${mac_address} |