| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| |
| PROFILE="null" |
| CORE_CONTAINER="null" |
| |
| node ('ubuntu16.04-basebuild-1c-2g') { |
| stage('Config') { |
| sh """ |
| sudo rm -rf ~/cord/ |
| sudo rm -rf ~/cord_profile |
| sudo rm -rf /opt/cord |
| sudo rm -rf /opt/cord_profile |
| sudo rm -rf /opt/credentials |
| sudo rm -rf /opt/images |
| sudo rm -rf /opt/pki |
| sudo rm -rf ~/.repo/ |
| mkdir ~/cord && cd ~/cord/ |
| repo init -u https://gerrit.opencord.org/manifest -b $GERRIT_BRANCH |
| repo sync |
| repo download $GERRIT_PROJECT $GERRIT_CHANGE_NUMBER/$GERRIT_PATCHSET_NUMBER |
| """ |
| } |
| try { |
| stage('Build') { |
| sh """ |
| if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then |
| PROFILE=rcord-local.yml |
| fi |
| if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then |
| PROFILE=ecord-local.yml |
| fi |
| if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then |
| PROFILE=mcord-ng40-local.yml |
| fi |
| if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then |
| PROFILE=mcord-cavium-local.yml |
| fi |
| cd ~/cord/build/ |
| make PODCONFIG=\$PROFILE config |
| make -j4 build |
| """ |
| } |
| stage('Setup') { |
| try { |
| sh """ |
| if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then |
| CORE_CONTAINER=rcord_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then |
| CORE_CONTAINER=ecord_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then |
| CORE_CONTAINER=mcordng40_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then |
| CORE_CONTAINER=mcordcavium_xos_core_1 |
| fi |
| cd ~/cord/test/cord-tester/src/test/cord-api/Properties/ |
| sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'127.0.0.1\'/\" RestApiProperties.py |
| sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'9101\'/\" RestApiProperties.py |
| sed -i \"s/^\\(PASSWD = \\).*/\\1\'\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)\'/\" RestApiProperties.py |
| docker cp ~/cord/test/cord-tester/src/test/cord-api/Tests/targets/xosapitests.xtarget \$CORE_CONTAINER:/opt/xos/lib/xos-genx/xosgenx/targets/xosapitests.xtarget |
| docker exec -i \$CORE_CONTAINER /bin/bash -c "xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/core/models/core.xproto" > ~/cord/test/cord-tester/src/test/cord-api/Tests/XOSCoreAPITests.robot |
| SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}') |
| export testname=_service_api.robot |
| for i in \$SERVICES; do bash -c "docker exec -i \$CORE_CONTAINER /bin/bash -c 'xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/dynamic_services/\$i/\$i.xproto'" > ~/cord/test/cord-tester/src/test/cord-api/Tests/\$i\$testname; done |
| """ |
| } |
| catch(error) { currentBuild.result = 'FAILURE' } |
| } |
| stage('Test') { |
| try { |
| sh """ |
| if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then |
| CORE_CONTAINER=rcord_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then |
| CORE_CONTAINER=ecord_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then |
| CORE_CONTAINER=mcordng40_xos_core_1 |
| fi |
| if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then |
| CORE_CONTAINER=mcordcavium_xos_core_1 |
| fi |
| cd ~/cord/test/cord-tester/src/test/cord-api/Tests |
| export testname=_service_api.robot |
| SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}') |
| echo \$SERVICES |
| pybot -d Log -T -e TenantWithContainer -e Port -e ControllerImages -e ControllerNetwork -e ControllerSlice XOSCoreAPITests.robot || true |
| for i in \$SERVICES; do bash -c "pybot -d Log -T -e AddressManagerServiceInstance -v xos_service:\$i \$i\$testname"; done || true |
| """ |
| } |
| catch(error) { currentBuild.result = 'FAILURE' } |
| } |
| stage('Publish') { |
| try { |
| sh """ |
| if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs |
| cp -r ~/cord/test/cord-tester/src/test/cord-api/Tests/Log/*ml ./RobotLogs |
| """ |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: 'RobotLogs/log*.html', |
| otherFiles: '', |
| outputFileName: 'RobotLogs/output*.xml', |
| outputPath: '.', |
| passThreshold: 100, |
| reportFileName: 'RobotLogs/report*.html', |
| unstableThreshold: 0]); |
| }catch(error) {} |
| } |
| } |
| finally { |
| stage('Cleanup') { |
| sh """ |
| cd /home/sdn/cord/build/ |
| make PODCONFIG=\$PROFILE config |
| make xos-teardown |
| make clean-local |
| docker images |
| """ |
| } |
| step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${RECIPIENTS}", sendToIndividuals: false]) |
| } |
| } |