| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test successful ping from end-end |
| Suite Setup Setup |
| Suite Teardown Teardown |
| Test Setup Create Models |
| Test Teardown Clean Test Environment |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../Framework/utils/utils.py |
| Resource ../../Framework/utils/utils.robot |
| Library ../../Framework/restApi.py |
| Resource ../../Framework/Subscriber.robot |
| Resource ../../Framework/ATTWorkFlowDriver.robot |
| Resource ../../Framework/ONU.robot |
| Resource ../../Framework/DHCP.robot |
| Variables ../../Properties/RestApiProperties.py |
| |
| *** Variables *** |
| ${WHITELIST_PATHFILE} ${CURDIR}/data/ATTWhiteList.json |
| ${SUBSCRIBER_PATHFILE} ${CURDIR}/data/ATTSubscriber.json |
| ${VOLT_DEVICE_PATHFILE} ${CURDIR}/../data/RealOLTDevice.json |
| ${src_ip} X.X.X.X |
| ${src_gateway} X.X.X.X |
| ${src_user} user |
| ${src_pass} pass |
| ${src_iface} eth0 |
| ${dst_ip} X.X.X.X |
| ${dst_dp_iface} eth0 |
| ${dst_dp_ip} X.X.X.X |
| ${dst_user} user |
| ${dst_pass} pass |
| ${dst_gateway} X.X.X.X |
| |
| *** Test Cases *** |
| ONU in Correct Location + Successful Auth Request |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Discovery of ONU Device after whitelist has been configured |
| ... Sending of a successful 802.1x auth request |
| ... Configuration of the destination servers interface and start dhcpd |
| ... Configuration of source server interface and execute dhclient on interface |
| ... Validate successful pings from src to dst |
| [Setup] None |
| Wait Until Keyword Succeeds 60s 2s Validate ONU States ACTIVE ENABLED |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth |
| Send EAPOL Message ${src_ip} ${src_user} ${src_pass} ${src_iface} wpa_supplicant.conf |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled |
| Add Double Vlan Interface on Host ${dst_ip} ${dst_user} ${dst_pass} ${dst_dp_iface} ${s_tag} ${c_tag} |
| Add IP Address on Interface on Host ${dst_ip} ${dst_user} ${dst_pass} ${dst_dp_ip}/24 ${dst_dp_iface}.${stag}.${c_tag} |
| Start DHCP Server on Remote Host ${dst_ip} ${dst_user} ${dst_pass} ${dst_dp_iface}.${stag}.${ctag} |
| Send Dhclient Request ${src_ip} ${src_user} ${src_pass} ${src_iface} |
| Wait Until Keyword Succeeds 60s 5s IPv4 Address Assigned to DHCP Client ${src_ip} ${src_user} ${src_pass} ${src_iface} |
| Wait Until Keyword Succeeds 60s 5s Test Ping PASS ${src_ip} ${src_user} ${src_pass} ${dst_dp_ip} ${src_iface} |
| |
| *** Keywords *** |
| Setup |
| ${auth} = Create List ${XOS_USER} ${XOS_PASSWD} |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ${server_ip} http://${server_ip}:${server_port} auth=${AUTH} headers=${HEADERS} |
| ${att_workflow_service_id}= Get Service Owner Id ${ATT_SERVICE} |
| ${volt_service_id}= Get Service Owner Id ${VOLT_SERVICE} |
| ${AttWhiteListList}= utils.jsonToList ${WHITELIST_PATHFILE} AttWhiteListInfo |
| Set Suite Variable ${alist} ${AttWhiteListList} |
| ${AttWhiteListList} = Get Variable Value ${alist} |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| ${AttWhiteListDict}= utils.setFieldValueInDict ${AttWhiteListDict} owner_id ${att_workflow_service_id} |
| ${onu_device}= Get From Dictionary ${AttWhiteListDict} serial_number |
| Log ${onu_device} |
| Set Global Variable ${onu_device} |
| ${SubscriberList}= utils.jsonToList ${SUBSCRIBER_PATHFILE} SubscriberInfo |
| Set Global Variable ${slist} ${SubscriberList} |
| ${SubscriberList} = Get Variable Value ${slist} |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| ${s_tag}= utils.getFieldValueFromDict ${SubscriberDict} s_tag |
| ${c_tag}= utils.getFieldValueFromDict ${SubscriberDict} c_tag |
| ${VoltDeviceList}= utils.jsonToList ${VOLT_DEVICE_PATHFILE} VOLTDeviceInfo |
| Set Global Variable ${vlist} ${VoltDeviceList} |
| Set Suite Variable ${s_tag} |
| Set Suite Variable ${c_tag} |
| |
| Teardown |
| [Documentation] Performs any additional cleanup required |
| Log Suite Teardown cleanup |
| Delete All Sessions |
| |
| Create Models |
| [Documentation] Re-create Subscriber, whitelist, and olt-device models to test |
| Log Re-creating objects |
| #create attwhitelist |
| ${AttWhiteListList} = Get Variable Value ${alist} |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| CORD Post ${ATT_WHITELIST} ${AttWhiteListDict} |
| #create subscriber |
| ${SubscriberList} = Get Variable Value ${slist} |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| Wait Until Keyword Succeeds 120s 15s CORD Post ${VOLT_SUBSCRIBER} ${SubscriberDict} |
| #create olt device |
| ${VoltDeviceList} = Get Variable Value ${vlist} |
| ${VoltDeviceDict}= utils.listToDict ${VoltDeviceList} 0 |
| CORD Post ${VOLT_DEVICE} ${VoltDeviceDict} |
| |
| Clean Test Environment |
| [Documentation] Delete xos objects, kills processes and cleans up interfaces on src+dst servers |
| Run Keyword And Ignore Error Kill Linux Process ${src_ip} ${src_user} ${src_pass} [w]pa_supplicant |
| Run Keyword And Ignore Error Kill Linux Process ${src_ip} ${src_user} ${src_pass} [d]hclient |
| Run Keyword And Ignore Error Kill Linux Process ${dst_ip} ${dst_user} ${dst_pass} [d]hcpd |
| Delete IP Addresses from Interface on Remote Host ${src_ip} ${src_user} ${src_pass} ${src_iface} |
| Delete Interface on Remote Host ${dst_ip} ${dst_user} ${dst_pass} ${dst_dp_iface}.${stag} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_SUBSCRIBER} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_DEVICE} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_WHITELIST} |
| |
| Validate ONU States |
| [Arguments] ${expected_op_status} ${expected_admin_status} |
| ${operational_status} ${admin_status} ONU Status Check ${onu_device} |
| Should Be Equal ${operational_status} ${expected_op_status} |
| Should Be Equal ${admin_status} ${expected_admin_status} |
| |
| Validate ATT Workflow Driver SI |
| [Arguments] ${expected_status} ${expected_auth_status} |
| ${onu_state} ${authentication_status} Service Instance Status Check ${onu_device} |
| Should Be Equal ${onu_state} ${expected_status} |
| Should Be Equal ${authentication_status} ${expected_auth_status} |
| |
| Validate Subscriber Status |
| [Arguments] ${exepected_status} |
| ${status} Subscriber Status Check ${onu_device} |
| Should Be Equal ${status} ${exepected_status} |