| # |
| # Copyright 2016-present Ciena Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| import unittest |
| import os,sys |
| import keystoneclient.v2_0.client as ksclient |
| import keystoneclient.apiclient.exceptions |
| import neutronclient.v2_0.client as nclient |
| import neutronclient.common.exceptions |
| from novaclient import client as nova_client |
| from neutronclient.v2_0 import client as neutron_client |
| import neutronclient.v2_0.client as neutronclient |
| from nose.tools import assert_equal, assert_not_equal |
| from twisted.internet import defer |
| from nose.twistedtools import reactor, deferred |
| from CordTestUtils import * |
| from onosclidriver import OnosCliDriver |
| from OnosCtrl import OnosCtrl |
| from OltConfig import OltConfig |
| from OnboardingServiceUtils import OnboardingServiceUtils |
| from SSHTestAgent import SSHTestAgent |
| from CordTestConfig import setup_module, running_on_ciab, teardown_module |
| from CordLogger import CordLogger |
| from CordTestUtils import * |
| from CordTestUtils import log_test as log |
| import requests |
| import time |
| import json |
| from VSGAccess import VSGAccess |
| log.setLevel('INFO') |
| |
| class onboarding_exchange(CordLogger): |
| ONOS_INSTANCES = 3 |
| V_INF1 = 'veth0' |
| device_id = 'of:' + get_mac() |
| TEST_IP = '8.8.8.8' |
| HOST = "10.1.0.1" |
| USER = "vagrant" |
| PASS = "vagrant" |
| head_node = os.getenv('HEAD_NODE', 'prod') |
| HEAD_NODE = head_node + '.cord.lab' if len(head_node.split('.')) == 1 else head_node |
| test_path = os.path.dirname(os.path.realpath(__file__)) |
| on_pod = running_on_pod() |
| vm_name = 'mysite_exampleservice' |
| olt_conf_file = os.getenv('OLT_CONFIG_FILE', os.path.join(test_path, '..', 'setup/olt_config.json')) |
| restApiXos = None |
| subscriber_account_num = 200 |
| subscriber_s_tag = 304 |
| subscriber_c_tag = 304 |
| subscribers_per_s_tag = 8 |
| subscriber_map = {} |
| subscriber_info = [] |
| volt_subscriber_info = [] |
| restore_methods = [] |
| FABRIC_PORT_HEAD_NODE = 1 |
| FABRIC_PORT_COMPUTE_NODE = 2 |
| APP_NAME = 'org.ciena.xconnect' |
| APP_FILE = os.path.join(test_path, '..', 'apps/xconnect-1.0-SNAPSHOT.oar') |
| NUM_SUBSCRIBERS = 5 |
| |
| @classmethod |
| def getSubscriberCredentials(cls, subId): |
| """Generate our own account num, s_tag and c_tags""" |
| if subId in cls.subscriber_map: |
| return cls.subscriber_map[subId] |
| account_num = cls.subscriber_account_num |
| cls.subscriber_account_num += 1 |
| s_tag, c_tag = cls.subscriber_s_tag, cls.subscriber_c_tag |
| cls.subscriber_c_tag += 1 |
| if cls.subscriber_c_tag % cls.subscribers_per_s_tag == 0: |
| cls.subscriber_s_tag += 1 |
| cls.subscriber_map[subId] = account_num, s_tag, c_tag |
| return cls.subscriber_map[subId] |
| |
| @classmethod |
| def getXosCredentials(cls): |
| onos_cfg = OnosCtrl.get_config() |
| if onos_cfg is None: |
| return None |
| if 'apps' in onos_cfg and \ |
| 'org.opencord.vtn' in onos_cfg['apps'] and \ |
| 'cordvtn' in onos_cfg['apps']['org.opencord.vtn'] and \ |
| 'xos' in onos_cfg['apps']['org.opencord.vtn']['cordvtn']: |
| xos_cfg = onos_cfg['apps']['org.opencord.vtn']['cordvtn']['xos'] |
| endpoint = xos_cfg['endpoint'] |
| user = xos_cfg['user'] |
| password = xos_cfg['password'] |
| xos_endpoints = endpoint.split(':') |
| xos_host = xos_endpoints[1][len('//'):] |
| xos_port = xos_endpoints[2][:-1] |
| #log.info('xos_host: %s, port: %s, user: %s, password: %s' %(xos_host, xos_port, user, password)) |
| return dict(host = xos_host, port = xos_port, user = user, password = password) |
| |
| return None |
| @classmethod |
| def getSubscriberConfig(cls, num_subscribers): |
| features = { |
| 'cdn': True, |
| 'uplink_speed': 1000000000, |
| 'downlink_speed': 1000000000, |
| 'uverse': True, |
| 'status': 'enabled' |
| } |
| subscriber_map = [] |
| for i in xrange(num_subscribers): |
| subId = 'sub{}'.format(i) |
| account_num, _, _ = cls.getSubscriberCredentials(subId) |
| identity = { 'account_num' : str(account_num), |
| 'name' : 'My House {}'.format(i) |
| } |
| sub_info = { 'features' : features, |
| 'identity' : identity |
| } |
| subscriber_map.append(sub_info) |
| |
| return subscriber_map |
| |
| @classmethod |
| def getVoltSubscriberConfig(cls, num_subscribers): |
| voltSubscriberMap = [] |
| for i in xrange(num_subscribers): |
| subId = 'sub{}'.format(i) |
| account_num, s_tag, c_tag = cls.getSubscriberCredentials(subId) |
| voltSubscriberInfo = {} |
| voltSubscriberInfo['voltTenant'] = dict(s_tag = str(s_tag), |
| c_tag = str(c_tag), |
| subscriber = '') |
| voltSubscriberInfo['account_num'] = account_num |
| voltSubscriberMap.append(voltSubscriberInfo) |
| |
| return voltSubscriberMap |
| |
| @classmethod |
| def setUpClass(cls): |
| OnboardingServiceUtils.setUp() |
| cls.controllers = get_controllers() |
| cls.controller = cls.controllers[0] |
| cls.cli = None |
| cls.on_pod = running_on_pod() |
| cls.on_ciab = running_on_ciab() |
| cls.olt = OltConfig(olt_conf_file = cls.olt_conf_file) |
| cls.vcpes = cls.olt.get_vcpes() |
| cls.vcpes_dhcp = cls.olt.get_vcpes_by_type('dhcp') |
| cls.vcpes_reserved = cls.olt.get_vcpes_by_type('reserved') |
| cls.dhcp_vcpes_reserved = [ 'vcpe{}.{}.{}'.format(i, cls.vcpes_reserved[i]['s_tag'], cls.vcpes_reserved[i]['c_tag']) |
| for i in xrange(len(cls.vcpes_reserved)) ] |
| cls.untagged_dhcp_vcpes_reserved = [ 'vcpe{}'.format(i) for i in xrange(len(cls.vcpes_reserved)) ] |
| cls.container_vcpes_reserved = [ 'vcpe-{}-{}'.format(vcpe['s_tag'], vcpe['c_tag']) for vcpe in cls.vcpes_reserved ] |
| vcpe_dhcp_reserved = None |
| vcpe_container_reserved = None |
| if cls.vcpes_reserved: |
| vcpe_dhcp_reserved = cls.dhcp_vcpes_reserved[0] |
| if cls.on_pod is False: |
| vcpe_dhcp_reserved = cls.untagged_dhcp_vcpes_reserved[0] |
| vcpe_container_reserved = cls.container_vcpes_reserved[0] |
| |
| cls.vcpe_dhcp_reserved = vcpe_dhcp_reserved |
| cls.vcpe_container_reserved = vcpe_container_reserved |
| dhcp_vcpe_offset = len(cls.vcpes_reserved) |
| cls.dhcp_vcpes = [ 'vcpe{}.{}.{}'.format(i+dhcp_vcpe_offset, cls.vcpes_dhcp[i]['s_tag'], cls.vcpes_dhcp[i]['c_tag']) |
| for i in xrange(len(cls.vcpes_dhcp)) ] |
| cls.untagged_dhcp_vcpes = [ 'vcpe{}'.format(i+dhcp_vcpe_offset) for i in xrange(len(cls.vcpes_dhcp)) ] |
| cls.container_vcpes = [ 'vcpe-{}-{}'.format(vcpe['s_tag'], vcpe['c_tag']) for vcpe in cls.vcpes_dhcp ] |
| vcpe_dhcp = None |
| vcpe_container = None |
| #cache the first dhcp vcpe in the class for quick testing |
| if cls.vcpes_dhcp: |
| vcpe_container = cls.container_vcpes[0] |
| vcpe_dhcp = cls.dhcp_vcpes[0] |
| if cls.on_pod is False: |
| vcpe_dhcp = cls.untagged_dhcp_vcpes[0] |
| cls.vcpe_container = vcpe_container_reserved or vcpe_container |
| cls.vcpe_dhcp = vcpe_dhcp_reserved or vcpe_dhcp |
| VSGAccess.setUp() |
| cls.setUpCordApi() |
| if cls.on_pod is True: |
| cls.openVCPEAccess(cls.volt_subscriber_info) |
| |
| @classmethod |
| def setUpCordApi(cls): |
| our_path = os.path.dirname(os.path.realpath(__file__)) |
| cord_api_path = os.path.join(our_path, '..', 'cord-api') |
| framework_path = os.path.join(cord_api_path, 'Framework') |
| utils_path = os.path.join(framework_path, 'utils') |
| data_path = os.path.join(cord_api_path, 'Tests', 'data') |
| subscriber_cfg = os.path.join(data_path, 'Subscriber.json') |
| volt_tenant_cfg = os.path.join(data_path, 'VoltTenant.json') |
| num_subscribers = max(cls.NUM_SUBSCRIBERS, 5) |
| cls.subscriber_info = cls.getSubscriberConfig(num_subscribers) |
| cls.volt_subscriber_info = cls.getVoltSubscriberConfig(num_subscribers) |
| |
| sys.path.append(utils_path) |
| sys.path.append(framework_path) |
| from restApi import restApi |
| restApiXos = restApi() |
| xos_credentials = cls.getXosCredentials() |
| if xos_credentials is None: |
| restApiXos.controllerIP = cls.HEAD_NODE |
| restApiXos.controllerPort = '9000' |
| else: |
| restApiXos.controllerIP = xos_credentials['host'] |
| restApiXos.controllerPort = xos_credentials['port'] |
| restApiXos.user = xos_credentials['user'] |
| restApiXos.password = xos_credentials['password'] |
| cls.restApiXos = restApiXos |
| |
| @classmethod |
| def getVoltId(cls, result, subId): |
| if type(result) is not type([]): |
| return None |
| for tenant in result: |
| if str(tenant['subscriber']) == str(subId): |
| return str(tenant['id']) |
| return None |
| |
| @classmethod |
| def closeVCPEAccess(cls, volt_subscriber_info): |
| OnosCtrl.uninstall_app(cls.APP_NAME, onos_ip = cls.HEAD_NODE) |
| |
| @classmethod |
| def openVCPEAccess(cls, volt_subscriber_info): |
| """ |
| This code is used to configure leaf switch for head node access to compute node over fabric. |
| Care is to be taken to avoid overwriting existing/default vcpe flows. |
| The access is opened for generated subscriber info which should not overlap. |
| We target the fabric onos instance on head node. |
| """ |
| OnosCtrl.install_app(cls.APP_FILE, onos_ip = cls.HEAD_NODE) |
| time.sleep(2) |
| s_tags = map(lambda tenant: int(tenant['voltTenant']['s_tag']), volt_subscriber_info) |
| #only get unique vlan tags |
| s_tags = list(set(s_tags)) |
| devices = OnosCtrl.get_device_ids(controller = cls.HEAD_NODE) |
| if devices: |
| device_config = {} |
| for device in devices: |
| device_config[device] = [] |
| for s_tag in s_tags: |
| xconnect_config = {'vlan': s_tag, 'ports' : [ cls.FABRIC_PORT_HEAD_NODE, cls.FABRIC_PORT_COMPUTE_NODE ] } |
| device_config[device].append(xconnect_config) |
| |
| cfg = { 'apps' : { 'org.ciena.xconnect' : { 'xconnectTestConfig' : device_config } } } |
| OnosCtrl.config(cfg, controller = cls.HEAD_NODE) |
| |
| |
| @classmethod |
| def tearDownClass(cls): |
| OnboardingServiceUtils.tearDown() |
| VSGAccess.tearDown() |
| if cls.on_pod is True: |
| cls.closeVCPEAccess(cls.volt_subscriber_info) |
| |
| def cliEnter(self, controller = None): |
| retries = 0 |
| while retries < 30: |
| self.cli = OnosCliDriver(controller = controller, connect = True) |
| if self.cli.handle: |
| break |
| else: |
| retries += 1 |
| time.sleep(2) |
| |
| def cliExit(self): |
| self.cli.disconnect() |
| |
| def onos_shutdown(self, controller = None): |
| status = True |
| self.cliEnter(controller = controller) |
| try: |
| self.cli.shutdown(timeout = 10) |
| except: |
| log.info('Graceful shutdown of ONOS failed for controller: %s' %controller) |
| status = False |
| |
| self.cliExit() |
| return status |
| |
| def get_exampleservice_vm_public_ip(self, vm_name = 'mysite_exampleservice'): |
| if not vm_name: |
| vm_name = self.vm_name |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if vm_name in service.name: |
| return service.get_public_ip() |
| return None |
| |
| def add_static_route_via_vcpe_interface(self, routes, vcpe=None,dhcp_ip=True): |
| if not vcpe: |
| vcpe = self.dhcp_vcpes_reserved[0] |
| if dhcp_ip: |
| os.system('dhclient '+vcpe) |
| time.sleep(1) |
| for route in routes: |
| log.info('route is %s'%route) |
| cmd = 'ip route add ' + route + ' via 192.168.0.1 '+ 'dev ' + vcpe |
| os.system(cmd) |
| return True |
| |
| def del_static_route_via_vcpe_interface(self,routes,vcpe=None,dhcp_release=True): |
| if not vcpe: |
| vcpe = self.dhcp_vcpes_reserved[0] |
| cmds = [] |
| for route in routes: |
| cmd = 'ip route del ' + route + ' via 192.168.0.1 ' + 'dev ' + vcpe |
| os.system(cmd) |
| if dhcp_release: |
| os.system('dhclient '+vcpe+' -r') |
| return True |
| |
| def vsg_for_external_connectivity(self, subscriber_index, reserved = False): |
| if reserved is True: |
| if self.on_pod is True: |
| vcpe = self.dhcp_vcpes_reserved[subscriber_index] |
| else: |
| vcpe = self.untagged_dhcp_vcpes_reserved[subscriber_index] |
| else: |
| if self.on_pod is True: |
| vcpe = self.dhcp_vcpes[subscriber_index] |
| else: |
| vcpe = self.untagged_dhcp_vcpes[subscriber_index] |
| mgmt = 'eth0' |
| host = '8.8.8.8' |
| self.success = False |
| assert_not_equal(vcpe, None) |
| vcpe_ip = VSGAccess.vcpe_get_dhcp(vcpe, mgmt = mgmt) |
| assert_not_equal(vcpe_ip, None) |
| log.info('Got DHCP IP %s for %s' %(vcpe_ip, vcpe)) |
| log.info('Sending icmp echo requests to external network 8.8.8.8') |
| st, _ = getstatusoutput('ping -c 3 8.8.8.8') |
| VSGAccess.restore_interface_config(mgmt, vcpe = vcpe) |
| assert_equal(st, 0) |
| |
| @deferred(50) |
| def test_exampleservice_health(self): |
| """ |
| Algo: |
| 1. Login to compute node VM |
| 2. Get all exampleservice |
| 3. Ping to all exampleservice |
| 4. Verifying Ping success |
| """ |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| status = OnboardingServiceUtils.health_check() |
| assert_equal(status, True) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(50) |
| def test_exampleservice_for_login(self): |
| """ |
| Algo: |
| 1. Login to compute node VM |
| 2. Get all exampleservice |
| 3. Login to all exampleservice |
| 4. Verifying Login success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| exampleservice_access_status = map(lambda exampleservice: exampleservice.check_access(), exampleservices) |
| status = filter(lambda st: st == False, exampleservice_access_status) |
| assert_equal(len(status), 0) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(30) |
| def test_exampleservice_for_default_route_through_testclient(self): |
| """ |
| Algo: |
| 1. Login to Head node |
| 2. Verify default route exists in test client |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| ssh_agent = SSHTestAgent(host = self.HEAD_NODE, user = self.USER, password = self.PASS) |
| cmd = "sudo lxc exec testclient -- route | grep default" |
| status, output = ssh_agent.run_cmd(cmd) |
| assert_equal(status, True) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(50) |
| def test_exampleservice_for_service_access_through_testclient(self): |
| """ |
| Algo: |
| 1. Login to Head node |
| 2. Ping to all exampleservice from test client |
| 3. Verifying Ping success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| ssh_agent = SSHTestAgent(host = self.HEAD_NODE, user = self.USER, password = self.PASS) |
| cmd = "sudo lxc exec testclient -- ping -c 3 {}".format(vm_public_ip) |
| status, output = ssh_agent.run_cmd(cmd) |
| assert_equal( status, True) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(30) |
| def test_exampleservice_for_service_reachability_from_cord_tester(self): |
| """ |
| Algo: |
| 1. Add static route to example service running VM IP in cord-tester |
| 2. Ping to the VM IP |
| 3. Verifying Ping success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, _ = getstatusoutput('ping -c 1 {}'.format(vm_public_ip)) |
| assert_equal(st, False) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(40) |
| def test_exampleservice_operational_status_from_testclient(self): |
| """ |
| Algo: |
| 1. Login to Head node |
| 2. Do curl request to the example service running VM IP from test client |
| 3. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| ssh_agent = SSHTestAgent(host = self.HEAD_NODE, user = self.USER, password = self.PASS) |
| cmd = 'sudo lxc exec testclient -- apt-get install -y curl' |
| status, _ = ssh_agent.run_cmd(cmd) |
| assert_equal(status, True) |
| #Test connectivity to ExampleService from test client |
| cmd = 'sudo lxc exec testclient -- curl -s http://{}'.format(vm_public_ip) |
| status, _ = ssh_agent.run_cmd(cmd) |
| assert_equal(status, True) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(30) |
| def test_exampleservice_operational_access_from_cord_tester(self): |
| """ |
| Algo: |
| 1. Add static route to example service running VM IP in cord-tester |
| 2. Do curl request to the VM IP |
| 3. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(40) |
| def test_exampleservice_for_service_message(self, service_message="\"hello\""): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying Service message in curl response |
| """ |
| if self.on_pod is False: |
| return |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st,out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| output = out.split('\n') |
| srvs_msg = '' |
| for line in output: |
| line = line.split(':') |
| if line[0].strip() == 'Service Message': |
| srvs_msg = line[1].strip() |
| assert_equal(service_message, srvs_msg) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(40) |
| def test_exampleservice_for_tenant_message(self, tenant_message="\"world\""): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying Tenant message in curl response |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st,out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| output = out.split('\n') |
| tnt_msg = '' |
| for line in output: |
| line = line.split(':') |
| if line[0].strip() == 'Tenant Message': |
| tnt_msg = line[1].strip() |
| assert_equal(tenant_message, tnt_msg) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(60) |
| def test_exampleservice_access_after_subscriber_interface_toggle(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Toggle vcpe interface in cord-tester and do curl request again |
| 6. Again verify curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| #curl request from test container |
| cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st, out = getstatusoutput(cmd) |
| assert_not_equal(out,'') |
| st, _ = getstatusoutput('ifconfig {} down'.format(vcpe_intf)) |
| assert_equal(st, False) |
| time.sleep(1) |
| st, _ = getstatusoutput('ifconfig {} up'.format(vcpe_intf)) |
| assert_equal(st, False) |
| time.sleep(1) |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput(cmd) |
| assert_not_equal(out,'') |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| getstatusoutput('ifconfig {} up'.format(vcpe_intf)) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| |
| @deferred(60) |
| def test_exampleservice_access_after_service_paused(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Pause example service running VM and do curl request again |
| 6. Verify curl response is an empty output |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Pausing example service running vm') |
| service_vm.pause() |
| time.sleep(2) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_equal(out,'') |
| service_vm.unpause() |
| time.sleep(3) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| service_vm.unpause() |
| time.sleep(3) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| #Test failing. server state goes to error after resuming |
| @deferred(60) |
| def test_exampleservice_access_after_service_is_suspended(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Suspend example service running VM and do curl request again |
| 6. Verify curl response is an empty output |
| 7. Resume suspended VM and do curl request now |
| 8. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Suspending example service running vm') |
| service_vm.suspend() |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_equal(out,'') |
| service_vm.resume() |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| service_vm.stop() |
| time.sleep(1) |
| service_vm.start() |
| time.sleep(5) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(60) |
| def test_exampleservice_access_after_service_restart(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Restart example service running VM and do curl request again |
| 9. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Restarting example service running vm') |
| service_vm.reboot() |
| time.sleep(5) |
| clock = 0 |
| status = False |
| while(clock <= 30): |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| if out != '': |
| status = True |
| break |
| clock += 5 |
| assert_equal(status, True) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| #not test. vSG VM goes down after restart |
| @deferred(70) |
| def test_exampleservice_access_after_vsg_vm_restart(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Restart vSG VM and do curl request again |
| 9. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| vcpe_name = self.container_vcpes_reserved [0] |
| vsg = VSGAccess.get_vcpe_vsg(vcpe_name) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Restarting vSG VM') |
| vsg.reboot() |
| time.sleep(5) |
| clock = 0 |
| status = False |
| while(clock <= 40): |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| if out != '': |
| status = True |
| break |
| clock += 5 |
| assert_equal(status, True) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(80) |
| def test_exampleservice_access_after_service_stop(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Stop example service running VM and do curl request again |
| 6. Verify curl response is an empty output |
| 7. Start stopped VM and do curl request now |
| 8. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Stopping example service running vm') |
| service_vm.stop() |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_equal(out,'') |
| service_vm.start() |
| time.sleep(5) |
| clock = 0 |
| status = False |
| while(clock <= 60): |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| if out != '': |
| status = True |
| break |
| clock += 5 |
| assert_equal(status, True) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| service_vm.start() |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(80) |
| def test_exampleservice_for_service_message_after_service_stop_and_start(self, service_message="\"hello\""): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Stop example service running VM and do curl request again |
| 6. Verify curl response is an empty output |
| 7. Start stopped VM and do curl request now |
| 8. Verifying Service message in curl response |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st,out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Stopping example service running VM') |
| service_vm.stop() |
| time.sleep(5) |
| st, out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_equal(out,'') |
| service.start() |
| time.sleep(5) |
| clock = 0 |
| while(clock <= 60): |
| time.sleep(5) |
| st,out = getstatusoutput('curl -s http://{} --max-time 10'.format(vm_public_ip)) |
| if out != '': |
| output = out.split('\n') |
| srvs_msg = None |
| for line in output: |
| line = line.split(':') |
| if line[0].strip() == 'Service Message': |
| srvs_msg = line[1].strip() |
| clock = 60 |
| break |
| clock += 5 |
| assert_equal(service_message, srvs_msg) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| service_vm.start() |
| time.sleep(5) |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(80) |
| def test_exampleservice_for_tenant_message_after_service_restart(self,tenant_message="\"world\""): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Restart example service running VM and do curl request again |
| 6. Verifying Tenant message in curl response |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| service_vm = None |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| exampleservices = OnboardingServiceUtils.get_exampleservices() |
| for service in exampleservices: |
| if self.vm_name in service.name: |
| service_vm = service |
| break |
| assert_not_equal(service_vm,None) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st,out = getstatusoutput('curl -s http://{} --max-time 5'.format(vm_public_ip)) |
| assert_not_equal(out,'') |
| log.info('Restarting example service running VM') |
| service_vm.reboot() |
| time.sleep(5) |
| clock = 0 |
| while(clock <= 40): |
| time.sleep(5) |
| st,out = getstatusoutput('curl -s http://{} --max-time 10'.format(vm_public_ip)) |
| if out != '': |
| output = out.split('\n') |
| tnnt_msg = None |
| for line in output: |
| line = line.split(':') |
| if line[0].strip() == 'Tenant Message': |
| tnnt_msg = line[1].strip() |
| clock = 40 |
| break |
| clock += 5 |
| assert_equal(tenant_message, tnnt_msg) |
| except Exception as error: |
| log.info('Got Unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(50) |
| def test_exampleservice_access_after_vcpe_instance_restart(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Restart vcpe instance and do curl request again |
| 8. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| vcpe_name = self.container_vcpes_reserved[0] |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vsg = VSGAccess.get_vcpe_vsg(vcpe_name) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| #curl request from test container |
| curl_cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st, out = getstatusoutput(curl_cmd) |
| assert_not_equal(out,'') |
| #restarting example service VM |
| cmd = 'sudo docker restart {}'.format(vcpe_name) |
| status, _ = vsg.run_cmd(cmd) |
| assert_equal(status, True) |
| time.sleep(5) |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| clock = 0 |
| status = False |
| while(clock <= 30): |
| time.sleep(5) |
| st, out = getstatusoutput(curl_cmd) |
| if out != '': |
| status = True |
| break |
| clock += 5 |
| assert_equal(status,True) |
| except Exception as error: |
| log.info('Got Unexpeted error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(50) |
| def test_exampleservice_access_after_vcpe_instance_wan_interface_toggle(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Restart vcpe instance and do curl request again |
| 8. Verifying curl request success |
| """ |
| if self.on_pod is False: |
| return |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| vcpe_name = self.container_vcpes_reserved[0] |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vsg = VSGAccess.get_vcpe_vsg(vcpe_name) |
| wan_intf = 'eth0' |
| mgmt = 'eth0' |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| #curl request from test container |
| curl_cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st, out = getstatusoutput(curl_cmd) |
| assert_not_equal(out,'') |
| st = VSGAccess.vcpe_wan_down(vcpe_name) |
| if st is False: |
| VSGAccess.restore_interface_config(mgmt, vcpe = vcpe_intf) |
| assert_not_equal(st, '0') |
| time.sleep(2) |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| curl_cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st, out = getstatusoutput(curl_cmd) |
| assert_equal(out,'') |
| st = VSGAccess.vcpe_wan_up(vcpe_name) |
| if st is False: |
| VSGAccess.restore_interface_config(mgmt, vcpe = vcpe_intf) |
| assert_not_equal(st, '0') |
| time.sleep(5) |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| st, out = getstatusoutput(curl_cmd) |
| assert_not_equal(out,'') |
| except Exception as error: |
| log.info('Got Unexpeted error %s'%error) |
| vsg.run_cmd('sudo docker restart {}'.format(vcpe_name,wan_intf)) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(30) |
| def test_exampleservice_access_after_firewall_rule_added_to_drop_service_running_server_in_vcpe_instance(self): |
| """ |
| Algo: |
| 1. Get dhcp ip to vcpe interface in cord-tester |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Add a firewall rule in vcpe instance to drop packets destined to example service VM |
| 6. Do curl request now |
| 7. Verifying curl response is an empty output |
| 8. Delete the firewall rule and do curl request again |
| 9. Verifying curl request success |
| """ |
| df = defer.Deferred() |
| def test_exampleservice(df,vcpe_intf=vcpe_intf,vcpe_name=vcpe_name): |
| vcpe_intf = self.dhcp_vcpes_reserved[0] |
| vcpe_name = self.container_vcpes_reserved[0] |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vsg = VSGAccess.get_vcpe_vsg(vcpe_name) |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| #curl request from test container |
| curl_cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st, out = getstatusoutput(curl_cmd) |
| assert_not_equal(out,'') |
| #restarting example service VM |
| cmd = 'sudo docker exec {} iptables -I FORWARD -d {} -j DROP'.format(vcpe_name,vm_public_ip) |
| status, _ = vsg.run_cmd(cmd) |
| assert_equal(status, True) |
| time.sleep(1) |
| st, out = getstatusoutput(curl_cmd) |
| assert_equal(out,'') |
| except Exception as error: |
| log.info('Got Unexpeted error %s'%error) |
| raise |
| finally: |
| vsg.run_cmd('sudo docker exec {} iptables -D FORWARD -d {} -j DROP'.format(vcpe_name,vm_public_ip)) |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| |
| def vsg_xos_subscriber_create(self, index, subscriber_info = None, volt_subscriber_info = None): |
| if self.on_pod is False: |
| return '' |
| if subscriber_info is None: |
| subscriber_info = self.subscriber_info[index] |
| if volt_subscriber_info is None: |
| volt_subscriber_info = self.volt_subscriber_info[index] |
| s_tag = int(volt_subscriber_info['voltTenant']['s_tag']) |
| c_tag = int(volt_subscriber_info['voltTenant']['c_tag']) |
| vcpe = 'vcpe-{}-{}'.format(s_tag, c_tag) |
| log.info('Creating tenant with s_tag: %d, c_tag: %d' %(s_tag, c_tag)) |
| subId = '' |
| try: |
| result = self.restApiXos.ApiPost('TENANT_SUBSCRIBER', subscriber_info) |
| assert_equal(result, True) |
| result = self.restApiXos.ApiGet('TENANT_SUBSCRIBER') |
| assert_not_equal(result, None) |
| subId = self.restApiXos.getSubscriberId(result, volt_subscriber_info['account_num']) |
| assert_not_equal(subId, '0') |
| log.info('Subscriber ID for account num %s = %s' %(str(volt_subscriber_info['account_num']), subId)) |
| volt_tenant = volt_subscriber_info['voltTenant'] |
| #update the subscriber id in the tenant info before making the rest |
| volt_tenant['subscriber'] = subId |
| result = self.restApiXos.ApiPost('TENANT_VOLT', volt_tenant) |
| assert_equal(result, True) |
| #if the vsg instance was already instantiated, then reduce delay |
| if c_tag % self.subscribers_per_s_tag == 0: |
| delay = 350 |
| else: |
| delay = 90 |
| log.info('Delaying %d seconds for the VCPE to be provisioned' %(delay)) |
| time.sleep(delay) |
| log.info('Testing for external connectivity to VCPE %s' %(vcpe)) |
| self.vsg_for_external_connectivity(index) |
| finally: |
| return subId |
| |
| def vsg_xos_subscriber_delete(self, index, subId = '', voltId = '', subscriber_info = None, volt_subscriber_info = None): |
| if self.on_pod is False: |
| return |
| if subscriber_info is None: |
| subscriber_info = self.subscriber_info[index] |
| if volt_subscriber_info is None: |
| volt_subscriber_info = self.volt_subscriber_info[index] |
| s_tag = int(volt_subscriber_info['voltTenant']['s_tag']) |
| c_tag = int(volt_subscriber_info['voltTenant']['c_tag']) |
| vcpe = 'vcpe-{}-{}'.format(s_tag, c_tag) |
| log.info('Deleting tenant with s_tag: %d, c_tag: %d' %(s_tag, c_tag)) |
| if not subId: |
| #get the subscriber id first |
| result = self.restApiXos.ApiGet('TENANT_SUBSCRIBER') |
| assert_not_equal(result, None) |
| subId = self.restApiXos.getSubscriberId(result, volt_subscriber_info['account_num']) |
| assert_not_equal(subId, '0') |
| if not voltId: |
| #get the volt id for the subscriber |
| result = self.restApiXos.ApiGet('TENANT_VOLT') |
| assert_not_equal(result, None) |
| voltId = self.getVoltId(result, subId) |
| assert_not_equal(voltId, None) |
| log.info('Deleting subscriber ID %s for account num %s' %(subId, str(volt_subscriber_info['account_num']))) |
| status = self.restApiXos.ApiDelete('TENANT_SUBSCRIBER', subId) |
| assert_equal(status, True) |
| #Delete the tenant |
| log.info('Deleting VOLT Tenant ID %s for subscriber %s' %(voltId, subId)) |
| self.restApiXos.ApiDelete('TENANT_VOLT', voltId) |
| |
| def vsg_xos_subscriber_id(self, index): |
| log.info('index and its type are %s, %s'%(index, type(index))) |
| volt_subscriber_info = self.volt_subscriber_info[index] |
| result = self.restApiXos.ApiGet('TENANT_SUBSCRIBER') |
| assert_not_equal(result, None) |
| subId = self.restApiXos.getSubscriberId(result, volt_subscriber_info['account_num']) |
| return subId |
| |
| @deferred(500) |
| def test_xos_subcriber_access_exampleservice(self,index=0): |
| """ |
| Algo: |
| 1. Create two vcpe instances using XOS |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Repeat steps for both vcpes |
| """ |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf = self.dhcp_vcpes[0] |
| subId = self.vsg_xos_subscriber_id(index) |
| if subId == '0': |
| subId = self.vsg_xos_subscriber_create(index) |
| assert_not_equal(subId,'0') |
| try: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| time.sleep(1) |
| cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st,out = getstatusoutput(cmd) |
| assert_not_equal(out,'') |
| except Exception as error: |
| log.info('Got unexpected error %s'%error) |
| raise |
| finally: |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf) |
| self.vsg_xos_subscriber_delete(index, subId = subId) |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |
| |
| @deferred(500) |
| def test_exampleservice_multiple_subcribers_access_same_service(self,index1=0,index2=1): |
| """ |
| Algo: |
| 1. Create two vcpe instances using XOS |
| 2. Add static route to example service running VM IP in cord-tester |
| 3. Do curl request to the VM IP |
| 4. Verifying curl request success |
| 5. Repeat steps for both vcpes |
| """ |
| df = defer.Deferred() |
| def test_exampleservice(df): |
| vm_public_ip = self.get_exampleservice_vm_public_ip() |
| vcpe_intf1 = self.dhcp_vcpes[0] |
| vcpe_intf2 = self.dhcp_vcpes[1] |
| subId1 = self.vsg_xos_subscriber_id(index1) |
| if subId1 == '0': |
| subId1 = self.vsg_xos_subscriber_create(index1) |
| assert_not_equal(subId1,'0') |
| subId2 = self.vsg_xos_subscriber_id(index2) |
| if subId2 == '0': |
| subId2 = self.vsg_xos_subscriber_create(index2) |
| assert_not_equal(subId2,'0') |
| try: |
| for vcpe in [vcpe_intf1,vcpe_intf2]: |
| self.add_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf1) |
| time.sleep(1) |
| status = False |
| cmd = 'curl -s http://{} --max-time 5'.format(vm_public_ip) |
| st,out = getstatusoutput(cmd) |
| assert_not_equal(out,'') |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf2) |
| time.sleep(1) |
| except Exception as error: |
| log.info('Got unexpected error %s'%error) |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf1) |
| self.del_static_route_via_vcpe_interface([vm_public_ip],vcpe=vcpe_intf2) |
| self.vsg_xos_subscriber_delete(index1, subId = subId1) |
| self.vsg_xos_subscriber_delete(index2, subId = subId2) |
| raise |
| df.callback(0) |
| reactor.callLater(0,test_exampleservice,df) |
| return df |