| # |
| # Copyright 2016-present Ciena Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| import os |
| import json |
| ##load the olt config |
| |
| class OltConfig: |
| def __init__(self, olt_conf_file = ''): |
| if not olt_conf_file: |
| self.olt_conf_file = os.getenv('OLT_CONFIG') |
| else: |
| self.olt_conf_file = olt_conf_file |
| try: |
| self.olt_handle = open(self.olt_conf_file, 'r') |
| self.olt_conf = json.load(self.olt_handle) |
| self.olt_conf['olt'] = True |
| except: |
| self.olt_handle = None |
| self.olt_conf = {} |
| self.olt_conf['olt'] = False |
| |
| def on_olt(self): |
| return self.olt_conf['olt'] is True |
| |
| def olt_port_map(self): |
| if self.on_olt() and self.olt_conf.has_key('port_map'): |
| port_map = {} |
| if self.olt_conf['port_map'].has_key('switches'): |
| port_map['switches'] = self.olt_conf['port_map']['switches'] |
| else: |
| port_map['switches'] = [] |
| nr_switches = 1 |
| if self.olt_conf['port_map'].has_key('nr_switches'): |
| nr_switches = int(self.olt_conf['port_map']['nr_switches']) |
| for sw in xrange(nr_switches): |
| switch = 'br-int{}'.format(sw+1) if sw > 0 else 'br-int' |
| port_map['switches'].append(switch) |
| #if we have a host interface enabled, invalidate the switches config |
| if self.olt_conf['port_map'].has_key('host'): |
| #if host interface is specified, then use the host instead of ovs switch |
| port_map['host'] = self.olt_conf['port_map']['host'] |
| port_map['switches'] = [ port_map['host'] ] |
| else: |
| port_map['host'] = port_map['switches'][0] |
| nr_switches = len(port_map['switches']) |
| port_map['switch_port_list'] = [] |
| if self.olt_conf['port_map'].has_key('ports'): |
| port_map['ports'] = self.olt_conf['port_map']['ports'] |
| num_ports = len(port_map['ports']) |
| port_map['switch_port_list'].append( (port_map['switches'][0], port_map['ports']) ) |
| else: |
| port_map['ports'] = [] |
| num_ports = int(self.olt_conf['port_map']['num_ports']) |
| for sw in xrange(nr_switches): |
| port_list = [] |
| switch = port_map['switches'][sw] |
| port_start = sw * num_ports * 2 |
| port_end = port_start + num_ports * 2 |
| for port in xrange(port_start, port_end, 2): |
| port_name = 'veth{}'.format(port) |
| port_map['ports'].append(port_name) |
| port_list.append(port_name) |
| port_map['switch_port_list'].append( (switch, port_list) ) |
| ##also add dhcprelay ports. We add as many relay ports as subscriber ports |
| port_map['num_ports'] = num_ports |
| relay_ports = num_ports |
| port_map['relay_ports'] = [] |
| port_map['switch_relay_port_list'] = [] |
| for sw in xrange(nr_switches): |
| port_list = [] |
| switch = port_map['switches'][sw] |
| port_start = (nr_switches + sw) * relay_ports * 2 |
| port_end = port_start + relay_ports * 2 |
| for port in xrange(port_start, port_end, 2): |
| port_name = 'veth{}'.format(port) |
| port_map['relay_ports'].append(port_name) |
| port_list.append(port_name) |
| port_map['switch_relay_port_list'].append( (switch, port_list) ) |
| port_num = 1 |
| port_map['uplink'] = int(self.olt_conf['uplink']) |
| port_map['wan'] = None |
| if self.olt_conf.has_key('wan'): |
| port_map['wan'] = self.olt_conf['wan'] |
| port_list = [] |
| ##build the port map and inverse port map |
| for sw in xrange(nr_switches): |
| sw_portnum = 1 |
| switch, ports = port_map['switch_port_list'][sw] |
| uplink = sw * num_ports + port_map['uplink'] |
| port_map[switch] = {} |
| port_map[switch]['uplink'] = uplink |
| for p in ports: |
| port_map[port_num] = p |
| port_map[p] = port_num |
| if sw_portnum != port_map['uplink']: |
| #create tx, rx map |
| port_list.append( (uplink, port_num) ) |
| port_num += 1 |
| sw_portnum += 1 |
| ##build the port and inverse map for relay ports |
| for port in port_map['relay_ports']: |
| port_map[port_num] = port |
| port_map[port] = port_num |
| port_num += 1 |
| port_map['start_vlan'] = 0 |
| if self.olt_conf['port_map'].has_key('start_vlan'): |
| port_map['start_vlan'] = int(self.olt_conf['port_map']['start_vlan']) |
| |
| return port_map, port_list |
| else: |
| return None, None |
| |
| def olt_device_data(self): |
| if self.on_olt(): |
| accessDeviceDict = {} |
| accessDeviceDict['uplink'] = str(self.olt_conf['uplink']) |
| accessDeviceDict['vlan'] = str(self.olt_conf['vlan']) |
| return accessDeviceDict |
| return None |