| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| node ("${TestNodeName}") { |
| timeout (100) { |
| try { |
| stage ("Parse deployment configuration file") { |
| sh returnStdout: true, script: "rm -rf ${configBaseDir} helm-repo-tools" |
| sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}" |
| sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools" |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml" |
| } |
| stage('Clean up') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| rm -rf cord-tester |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet'); |
| do |
| echo "Purging chart: \${hchart}" |
| helm delete --purge "\${hchart}" |
| done |
| """ |
| timeout(5) { |
| waitUntil { |
| helm_deleted = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l |
| """ |
| return helm_deleted.toInteger() == 0 |
| } |
| } |
| timeout(5) { |
| waitUntil { |
| kubectl_deleted = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l |
| """ |
| return kubectl_deleted.toInteger() == 0 |
| } |
| } |
| } |
| } |
| stage('Add CORD repository') { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| helm repo add cord https://charts.opencord.org |
| helm repo update |
| """ |
| timeout(1) { |
| waitUntil { |
| cord_repo_present = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm repo list | grep cord | wc -l |
| """ |
| return cord_repo_present.toInteger() == 1 |
| } |
| } |
| } |
| stage('Install CORD Platform') { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n cord-platform --version 7.0.0 cord/cord-platform |
| """ |
| timeout(1) { |
| waitUntil { |
| cord_helm_installed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm ls | grep -i cord-platform | wc -l |
| """ |
| return cord_helm_installed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Wait for etcd-operator to be installed') { |
| timeout(10) { |
| waitUntil { |
| etcd_operator_installed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| kubectl get pods | grep -i etcd-operator | grep -i running | wc -l |
| """ |
| crd_present = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| kubectl get crd | grep -i etcd | wc -l |
| """ |
| return etcd_operator_installed.toInteger() + crd_present.toInteger() == 6 |
| } |
| } |
| } |
| stage('Install SEBA Profile') { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n seba --version 2.0.0-alpha1 cord/seba |
| """ |
| timeout(1) { |
| waitUntil { |
| seba_helm_installed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm ls | grep -i seba | wc -l |
| """ |
| return seba_helm_installed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Install ATT workflow') { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n att-workflow --version 1.2.4 cord/att-workflow |
| """ |
| timeout(1) { |
| waitUntil { |
| attworkflow_helm_installed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm ls | grep -i att-workflow | wc -l |
| """ |
| return attworkflow_helm_installed.toInteger() == 1 |
| } |
| } |
| } |
| stage('Check containers are running') { |
| timeout(20) { |
| waitUntil { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| helm-repo-tools/wait_for_pods.sh |
| """ |
| pods_completed = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| kubectl get pods --all-namespaces | grep -i completed | grep -E -v 'docker-registry|mavenrepo|ponnet|kube-system' | wc -l |
| """ |
| return pods_completed.toInteger() == 3 |
| } |
| } |
| } |
| if ( params.reinstallOlt ) { |
| stage('Reinstall OLT software') { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16' |
| """ |
| timeout(5) { |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l' |
| """ |
| return olt_sw_present.toInteger() == 0 |
| } |
| } |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}" |
| """ |
| timeout(5) { |
| waitUntil { |
| olt_sw_present = sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l' |
| """ |
| return olt_sw_present.toInteger() == 1 |
| } |
| } |
| // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded |
| if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') { |
| sh returnStdout: true, script: """ |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh' |
| """ |
| } |
| } |
| } |
| stage('Restart OLT processes') { |
| for(int i=0; i < deployment_config.olts.size(); i++) { |
| timeout(5) { |
| sh returnStdout: true, script: """ |
| ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log' |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &' |
| sleep 5 |
| sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &' |
| """ |
| } |
| timeout(15) { |
| waitUntil { |
| onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state: up\" | wc -l'" |
| return onu_discovered.toInteger() > 0 |
| } |
| } |
| } |
| } |
| } |
| if ( params.configurePod ) { |
| dir ("${configBaseDir}/${configToscaDir}/att-workflow") { |
| stage('Configure R-CORD - Fabric and whitelist') { |
| timeout(1) { |
| waitUntil { |
| out_fabric = sh returnStdout: true, script: """ |
| curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l |
| """ |
| return out_fabric.toInteger() == 1 |
| } |
| } |
| } |
| stage('Configure R-CORD - Subscriber') { |
| timeout(1) { |
| waitUntil { |
| out_subscriber = sh returnStdout: true, script: """ |
| curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l |
| """ |
| return out_subscriber.toInteger() == 1 |
| } |
| } |
| } |
| stage('Configure R-CORD - OLT') { |
| timeout(1) { |
| waitUntil { |
| out_olt = sh returnStdout: true, script: """ |
| curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l |
| """ |
| return out_olt.toInteger() == 1 |
| } |
| } |
| } |
| } |
| } |
| if ( params.installBBSim ) { |
| dir ("helm-charts") { |
| stage('Install BBSim') { |
| timeout(10) { |
| sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf |
| helm install -f ${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n bbsim --version 1.0.0 cord/bbsim --set onus_per_pon_port=${onuNumber} |
| """ |
| } |
| timeout(10) { |
| waitUntil { |
| base_kubernetes_tosca_running = sh returnStdout: true, script: """ |
| export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf && |
| kubectl get pods -n voltha | grep -i bbsim | wc -l |
| """ |
| return base_kubernetes_tosca_running.toInteger() == 1 |
| } |
| } |
| } |
| } |
| dir ("${configBaseDir}/${configToscaDir}/bbsim") { |
| stage('Configure BBSim - OLT') { |
| timeout(1) { |
| waitUntil { |
| out_olt = sh returnStdout: true, script: """ |
| curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @bbsim-16.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l |
| """ |
| return out_olt.toInteger() == 1 |
| } |
| } |
| } |
| } |
| } |
| currentBuild.result = 'SUCCESS' |
| } catch (err) { |
| currentBuild.result = 'FAILURE' |
| step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false]) |
| } |
| echo "RESULT: ${currentBuild.result}" |
| } |
| } |