| ubuntu@olt-tester:~/cord-tester/src/test/setup$ |
| ubuntu@olt-tester:~/cord-tester/src/test/setup$ vi ../dhcpl2relay/dhcpl2relayTest.py |
| ubuntu@olt-tester:~/cord-tester/src/test/setup$ |
| ubuntu@olt-tester:~/cord-tester/src/test/setup$ ./voltha-test.py --test-type=dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg --manifest=manifest-olt-voltha-local.json --voltha-host=10.70.47.64 --olt-type=tibit_olt --olt-arg=00:0c:e2:31:05:00 --disable-teardown --disable-cleanup --test-mode |
| Starting CordTester Web Server |
| * Running on http://127.0.0.1:5000/ (Press CTRL+C to quit) |
| * Restarting with stat |
| * Debugger is active! |
| * Debugger PIN: 718-316-938 |
| Running test case dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg |
| WARNING: No route found for IPv6 destination :: (no default route?) |
| Controller IP [u'10.70.47.64'], Test type dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg |
| Installing ONOS cord apps |
| # Host [10.70.47.64]:8101 found: line 5 |
| /root/.ssh/known_hosts updated. |
| Original contents retained as /root/.ssh/known_hosts.old |
| onoscli: eof exception found |
| onoscli: logout |
| |
| Connection to 10.70.47.64 closed. |
| |
| result.ok, result.status_code are False and 409 |
| ONOS app cord-config, version 3.0-SNAPSHOT installed |
| result.ok, result.status_code are False and 409 |
| ONOS app sadis-app, version 3.0-SNAPSHOT installed |
| result.ok, result.status_code are False and 409 |
| ONOS app olt-app, version 3.0-SNAPSHOT installed |
| result.ok, result.status_code are False and 409 |
| ONOS app aaa, version 3.0-SNAPSHOT installed |
| result.ok, result.status_code are False and 409 |
| ONOS app igmp, version 3.0-SNAPSHOT installed |
| Installing cord tester ONOS app /home/ubuntu/cord-tester/src/test/apps/ciena-cordigmp-multitable-3.0-SNAPSHOT.oar |
| result.ok, result.status_code are False and 409 |
| Radius server running with IP 11.0.0.3 |
| Running ['dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg'] tests across 1 containers in parallel |
| Starting test container cord-tester1, image cordtest/nose, tag candidate |
| Provisioning the ports for the test container |
| |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth0 -l l1 cord-tester1 192.168.100.1/24 02:03:04:00:00:01 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth2 -l l2 cord-tester1 192.168.100.2/24 02:03:04:00:00:02 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth4 -l l3 cord-tester1 192.168.100.3/24 02:03:04:00:00:03 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth6 -l l4 cord-tester1 192.168.100.4/24 02:03:04:00:00:04 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth8 -l l5 cord-tester1 192.168.100.5/24 02:03:04:00:00:05 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth10 -l l6 cord-tester1 192.168.100.6/24 02:03:04:00:00:06 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth12 -l l7 cord-tester1 192.168.100.7/24 02:03:04:00:00:07 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth14 -l l8 cord-tester1 192.168.100.8/24 02:03:04:00:00:08 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth16 -l l9 cord-tester1 192.168.100.9/24 02:03:04:00:00:09 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth18 -l l10 cord-tester1 192.168.100.10/24 02:03:04:00:00:0a |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth20 -l l11 cord-tester1 192.168.100.11/24 02:03:04:00:00:0b |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth22 -l l12 cord-tester1 192.168.100.12/24 02:03:04:00:00:0c |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth24 -l l13 cord-tester1 192.168.100.13/24 02:03:04:00:00:0d |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth26 -l l14 cord-tester1 192.168.100.14/24 02:03:04:00:00:0e |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth28 -l l15 cord-tester1 192.168.100.15/24 02:03:04:00:00:0f |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth30 -l l16 cord-tester1 192.168.100.16/24 02:03:04:00:00:10 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth32 -l l17 cord-tester1 192.168.100.17/24 02:03:04:00:00:11 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth34 -l l18 cord-tester1 192.168.100.18/24 02:03:04:00:00:12 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth36 -l l19 cord-tester1 192.168.100.19/24 02:03:04:00:00:13 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth38 -l l20 cord-tester1 192.168.100.20/24 02:03:04:00:00:14 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth40 -l l21 cord-tester1 192.168.100.21/24 02:03:04:00:00:15 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth42 -l l22 cord-tester1 192.168.100.22/24 02:03:04:00:00:16 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth44 -l l23 cord-tester1 192.168.100.23/24 02:03:04:00:00:17 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth46 -l l24 cord-tester1 192.168.100.24/24 02:03:04:00:00:18 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth48 -l l25 cord-tester1 192.168.100.25/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth50 -l l26 cord-tester1 192.168.100.26/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth52 -l l27 cord-tester1 192.168.100.27/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth54 -l l28 cord-tester1 192.168.100.28/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth56 -l l29 cord-tester1 192.168.100.29/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth58 -l l30 cord-tester1 192.168.100.30/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth60 -l l31 cord-tester1 192.168.100.31/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth62 -l l32 cord-tester1 192.168.100.32/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth64 -l l33 cord-tester1 192.168.100.33/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth66 -l l34 cord-tester1 192.168.100.34/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth68 -l l35 cord-tester1 192.168.100.35/24 |
| Running PIPEWORK cmd: pipework enp1s0f0 -i veth70 -l l36 cord-tester1 192.168.100.36/24 |
| Provisioning guest port vcpe0 for cord-tester1 with host port: enp1s0f0, s_tag: 222, c_tag: 111 |
| |
| Provisioning guest port vcpe1 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 304 |
| |
| Provisioning guest port vcpe2 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 305 |
| |
| Provisioning guest port vcpe3 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 306 |
| |
| Provisioning guest port vcpe4 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 307 |
| |
| Provisioning guest port vcpe5 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 308 |
| |
| Provisioning guest port vcpe6 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 309 |
| |
| Provisioning guest port vcpe7 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 310 |
| |
| Provisioning guest port vcpe8 for cord-tester1 with host port: enp1s0f0, s_tag: 304, c_tag: 311 |
| |
| Modifying scapy tool files before running a test: ['dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg'] |
| Running tests: ['dhcpl2relay:dhcpl2relay_exchange.test_dhcpl2relay_netcfg'] |
| Connecting to controller at 10.70.47.64 |
| onoscli: Trying to connect to 10.70.47.64 |
| Spawning pexpect for ip 10.70.47.64 |
| ssh connection asked for password, gave password |
| Command 'summary -j' sent to onoscli. |
| onoscli: eof exception found |
| onoscli: logout |
| |
| Connection to 10.70.47.64 closed. |
| |
| Voltha device of:0001000000000001 not in map. Using uplink vlan 333 |
| Installing OLT app /root/test/src/test/utils/../apps/olt-app-3.0-SNAPSHOT.oar |
| Connecting to controller at 10.70.47.64 |
| onoscli: Trying to connect to 10.70.47.64 |
| # Host [10.70.47.64]:8101 found: line 1 type RSA |
| Spawning pexpect for ip 10.70.47.64 |
| ssh connection asked for password, gave password |
| Command 'summary -j' sent to onoscli. |
| onoscli: eof exception found |
| onoscli: logout |
| |
| Connection to 10.70.47.64 closed. |
| |
| Running command: ip link add link veth48 name veth48.333 type vlan id 333 |
| Running command: ip link set veth48.333 up |
| Running command: ip link add link veth48.333 name veth48.333.254 type vlan id 254 |
| Running command: ip link set veth48.333.254 up |
| Configuring OVS flow for port 37, s_tag 333 |
| test_dhcpl2relay_netcfg (dhcpl2relay.dhcpl2relayTest.dhcpl2relay_exchange) ... # Host [10.70.47.64]:8101 found: line 1 type RSA |
| org.opencord.dhcpl2relay app is being installed |
| The network configuration is shown = {u'dhcpl2relay': {u'dhcpServerConnectPoints': [u'of:000022589e4e744e/9', u'of:000022589e4e744e/1', u'of:000022589e4e744e/5', u'of:00003ee38e69ac49/12', u'of:000022589e4e744e/19', u'of:000022589e4e744e/12', u'of:00003e11096a754a/12', u'of:00003acc45bea44c/12']}} |
| |
| Test test_dhcpl2relay_netcfg has no errors and warnings in the logs |
| ok |
| |
| ---------------------------------------------------------------------- |
| Ran 1 test in 33.440s |
| |
| OK |
| Test dhcpl2relayTest.py:dhcpl2relay_exchange.test_dhcpl2relay_netcfg Success |
| Done running tests |
| Removing test container cord-tester1 |
| 127.0.0.1 - - [10/Oct/2017 22:59:24] "POST /test HTTP/1.1" 200 - |
| ubuntu@olt-tester:~/cord-tester/src/test/setup$ |
| |