| import os |
| import sys |
| import unittest |
| import time, monotonic |
| import json |
| import requests |
| import threading |
| from IGMP import * |
| from random import randint |
| from threading import Timer |
| from threadPool import ThreadPool |
| from nose.tools import * |
| from nose.twistedtools import reactor, deferred |
| from twisted.internet import defer |
| from CordTestConfig import setup_module, teardown_module |
| from CordTestUtils import log_test |
| from VolthaCtrl import VolthaCtrl, voltha_setup, voltha_teardown |
| from CordTestUtils import log_test, get_controller |
| from portmaps import g_subscriber_port_map |
| from OltConfig import * |
| from EapTLS import TLSAuthTest |
| from Channels import Channels, IgmpChannel |
| from Stats import Stats |
| from DHCP import DHCPTest |
| from OnosCtrl import OnosCtrl |
| from CordLogger import CordLogger |
| from scapy.all import * |
| from scapy_ssl_tls.ssl_tls import * |
| from scapy_ssl_tls.ssl_tls_crypto import * |
| from CordTestServer import cord_test_onos_restart, cord_test_shell, cord_test_radius_restart |
| from CordContainer import Onos |
| |
| |
| class Voltha_olt_subscribers(Channels): |
| |
| STATS_RX = 0 |
| STATS_TX = 1 |
| STATS_JOIN = 2 |
| STATS_LEAVE = 3 |
| |
| def __init__(self, tx_port, rx_port, num_channels =1, channel_start = 0, src_list = None): |
| self.tx_port = tx_port |
| self.rx_port = rx_port |
| self.src_list = src_list |
| self.num_channels = num_channels |
| try: |
| self.tx_intf = tx_port |
| self.rx_intf = rx_port |
| except: |
| self.tx_intf = self.INTF_TX_DEFAULT |
| self.rx_intf = self.INTF_RX_DEFAULT |
| # num = 1 |
| # channel_start = 0 |
| mcast_cb = None |
| Channels.__init__(self, num_channels, channel_start = channel_start, src_list = src_list, |
| iface = self.rx_intf, iface_mcast = self.tx_intf, mcast_cb = mcast_cb) |
| |
| self.loginType = 'wireless' |
| ##start streaming channels |
| self.join_map = {} |
| ##accumulated join recv stats |
| self.join_rx_stats = Stats() |
| self.recv_timeout = False |
| |
| |
| def channel_join_update(self, chan, join_time): |
| self.join_map[chan] = ( Stats(), Stats(), Stats(), Stats() ) |
| self.channel_update(chan, self.STATS_JOIN, 1, t = join_time) |
| |
| def channel_join(self, chan = 0, delay = 2, src_list = None, record_type = None): |
| '''Join a channel and create a send/recv stats map''' |
| if self.join_map.has_key(chan): |
| del self.join_map[chan] |
| self.delay = delay |
| chan, join_time = self.join(chan, src_list = src_list, record_type = record_type) |
| #chan, join_time = self.join(chan) |
| self.channel_join_update(chan, join_time) |
| return chan |
| |
| def channel_join_next(self, delay = 2, src_list = None, leave_flag = True): |
| '''Joins the next channel leaving the last channel''' |
| if self.last_chan: |
| if self.join_map.has_key(self.last_chan): |
| del self.join_map[self.last_chan] |
| self.delay = delay |
| chan, join_time = self.join_next(src_list = src_list, leave_flag = leave_flag) |
| self.channel_join_update(chan, join_time) |
| return chan |
| |
| def channel_jump(self, delay = 2): |
| '''Jumps randomly to the next channel leaving the last channel''' |
| if self.last_chan is not None: |
| if self.join_map.has_key(self.last_chan): |
| del self.join_map[self.last_chan] |
| self.delay = delay |
| chan, join_time = self.jump() |
| self.channel_join_update(chan, join_time) |
| return chan |
| |
| def channel_leave(self, chan = 0, force = False, src_list = None): |
| if self.join_map.has_key(chan): |
| del self.join_map[chan] |
| self.leave(chan, force = force, src_list = src_list) |
| |
| def channel_update(self, chan, stats_type, packets, t=0): |
| if type(chan) == type(0): |
| chan_list = (chan,) |
| else: |
| chan_list = chan |
| for c in chan_list: |
| if self.join_map.has_key(c): |
| self.join_map[c][stats_type].update(packets = packets, t = t) |
| |
| def channel_receive(self, chan, cb = None, count = 1, timeout = 5, src_list = None): |
| log_test.info('Subscriber on port %s checking data traffic receiving from group %s, channel %d' % |
| (self.rx_intf, self.gaddr(chan), chan)) |
| r = self.recv(chan, cb = cb, count = count, timeout = timeout, src_list = src_list) |
| if len(r) == 0: |
| log_test.info('Subscriber on port %s timed out' %( self.rx_intf)) |
| self.test_status = False |
| else: |
| self.test_status = True |
| pass |
| # log_test.info('Subscriber on port %s received %d packets' %(self.rx_intf, len(r))) |
| if self.recv_timeout: |
| ##Negative test case is disabled for now |
| log_test.info('Subscriber on port %s not received %d packets' %(self.rx_intf, len(r))) |
| assert_equal(len(r), 0) |
| self.test_status = True |
| return self.test_status |
| |
| def recv_channel_cb(self, pkt, src_list = None): |
| |
| ##First verify that we have received the packet for the joined instance |
| log_test.info('Packet received for group %s, subscriber, port %s showing full packet %s'% |
| (pkt[IP].dst, self.rx_intf, pkt.show)) |
| if self.recv_timeout: |
| return |
| chan = self.caddr(pkt[IP].dst) |
| assert_equal(chan in self.join_map.keys(), True) |
| recv_time = monotonic.monotonic() * 1000000 |
| join_time = self.join_map[chan][self.STATS_JOIN].start |
| delta = recv_time - join_time |
| self.join_rx_stats.update(packets=1, t = delta, usecs = True) |
| self.channel_update(chan, self.STATS_RX, 1, t = delta) |
| log_test.debug('Packet received in %.3f usecs for group %s after join' %(delta, pkt[IP].dst)) |
| |
| class voltha_subscriber_pool: |
| |
| def __init__(self, subscriber, test_cbs): |
| self.subscriber = subscriber |
| self.test_cbs = test_cbs |
| |
| def pool_cb(self): |
| for cb in self.test_cbs: |
| if cb: |
| self.test_status = cb(self.subscriber, multiple_sub = True) |
| if self.test_status is not True: |
| ## This is chaining for other sub status has to check again |
| self.test_status = True |
| log_test.info('This service is failed and other services will not run for this subscriber') |
| break |
| log_test.info('This Subscriber is tested for multiple service eligibility ') |
| self.test_status = True |
| |
| class voltha_exchange(unittest.TestCase): |
| |
| OLT_TYPE = 'tibit_olt' |
| OLT_MAC = '00:0c:e2:31:12:00' |
| VOLTHA_HOST = 'localhost' |
| VOLTHA_REST_PORT = 8881 |
| VOLTHA_OLT_TYPE = 'ponsim_olt' |
| VOLTHA_OLT_MAC = '00:0c:e2:31:12:00' |
| VOLTHA_IGMP_ITERATIONS = 100 |
| voltha = None |
| voltha_attrs = None |
| success = True |
| olt_device_id = None |
| apps = ('org.opencord.aaa', 'org.onosproject.dhcp', 'org.onosproject.dhcprelay') |
| app_dhcp = ('org.onosproject.dhcp') |
| olt_apps = () #'org.opencord.cordmcast') |
| vtn_app = 'org.opencord.vtn' |
| table_app = 'org.ciena.cordigmp' |
| test_path = os.path.dirname(os.path.realpath(__file__)) |
| table_app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-multitable-2.0-SNAPSHOT.oar') |
| app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-2.0-SNAPSHOT.oar') |
| olt_app_file = os.path.join(test_path, '..', 'apps/olt-app-1.2-SNAPSHOT.oar') |
| olt_app_name = 'org.onosproject.olt' |
| #onos_config_path = os.path.join(test_path, '..', 'setup/onos-config') |
| olt_conf_file = os.getenv('OLT_CONFIG_FILE', os.path.join(test_path, '..', 'setup/olt_config.json')) |
| onos_restartable = bool(int(os.getenv('ONOS_RESTART', 0))) |
| VOLTHA_AUTO_CONFIGURE = False |
| num_joins = 0 |
| |
| relay_interfaces_last = () |
| interface_to_mac_map = {} |
| host_ip_map = {} |
| default_config = { 'default-lease-time' : 600, 'max-lease-time' : 7200, } |
| default_options = [ ('subnet-mask', '255.255.255.0'), |
| ('broadcast-address', '192.168.1.255'), |
| ('domain-name-servers', '192.168.1.1'), |
| ('domain-name', '"mydomain.cord-tester"'), |
| ] |
| ##specify the IP for the dhcp interface matching the subnet and subnet config |
| ##this is done for each interface dhcpd server would be listening on |
| default_subnet_config = [ ('192.168.1.2', |
| ''' |
| subnet 192.168.1.0 netmask 255.255.255.0 { |
| range 192.168.1.10 192.168.1.100; |
| } |
| '''), ] |
| |
| |
| VOLTHA_ENABLED = True |
| INTF_TX_DEFAULT = 'veth2' |
| INTF_RX_DEFAULT = 'veth0' |
| INTF_2_RX_DEFAULT = 'veth6' |
| TESTCASE_TIMEOUT = 300 |
| VOLTHA_IGMP_ITERATIONS = 10 |
| # VOLTHA_CONFIG_FAKE = True |
| VOLTHA_CONFIG_FAKE = False |
| VOLTHA_UPLINK_VLAN_MAP = { 'of:0000000000000001' : '222' } |
| VOLTHA_UPLINK_VLAN_START = 444 |
| VOLTHA_ONU_UNI_PORT = 'veth0' |
| |
| dhcp_server_config = { |
| "ip": "10.1.11.50", |
| "mac": "ca:fe:ca:fe:ca:fe", |
| "subnet": "255.255.252.0", |
| "broadcast": "10.1.11.255", |
| "router": "10.1.8.1", |
| "domain": "8.8.8.8", |
| "ttl": "63", |
| "delay": "2", |
| "startip": "10.1.11.51", |
| "endip": "10.1.11.100" |
| } |
| |
| |
| CLIENT_CERT = """-----BEGIN CERTIFICATE----- |
| MIICuDCCAiGgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBizELMAkGA1UEBhMCVVMx |
| CzAJBgNVBAgTAkNBMRIwEAYDVQQHEwlTb21ld2hlcmUxEzARBgNVBAoTCkNpZW5h |
| IEluYy4xHjAcBgkqhkiG9w0BCQEWD2FkbWluQGNpZW5hLmNvbTEmMCQGA1UEAxMd |
| RXhhbXBsZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkwHhcNMTYwNjA2MjExMjI3WhcN |
| MTcwNjAxMjExMjI3WjBnMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNV |
| BAoTCkNpZW5hIEluYy4xFzAVBgNVBAMUDnVzZXJAY2llbmEuY29tMR0wGwYJKoZI |
| hvcNAQkBFg51c2VyQGNpZW5hLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC |
| gYEAwvXiSzb9LZ6c7uNziUfKvoHO7wu/uiFC5YUpXbmVGuGZizbVrny0xnR85Dfe |
| +9R4diansfDhIhzOUl1XjN3YDeSS9OeF5YWNNE8XDhlz2d3rVzaN6hIhdotBkUjg |
| rUewjTg5OFR31QEyG3v8xR3CLgiE9xQELjZbSA07pD79zuUCAwEAAaNPME0wEwYD |
| VR0lBAwwCgYIKwYBBQUHAwIwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL3d3dy5l |
| eGFtcGxlLmNvbS9leGFtcGxlX2NhLmNybDANBgkqhkiG9w0BAQUFAAOBgQDAjkrY |
| 6tDChmKbvr8w6Du/t8vHjTCoCIocHTN0qzWOeb1YsAGX89+TrWIuO1dFyYd+Z0KC |
| PDKB5j/ygml9Na+AklSYAVJIjvlzXKZrOaPmhZqDufi+rXWti/utVqY4VMW2+HKC |
| nXp37qWeuFLGyR1519Y1d6F/5XzqmvbwURuEug== |
| -----END CERTIFICATE-----""" |
| |
| CLIENT_CERT_INVALID = '''-----BEGIN CERTIFICATE----- |
| MIIDvTCCAqWgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBizELMAkGA1UEBhMCVVMx |
| CzAJBgNVBAgTAkNBMRIwEAYDVQQHEwlTb21ld2hlcmUxEzARBgNVBAoTCkNpZW5h |
| IEluYy4xHjAcBgkqhkiG9w0BCQEWD2FkbWluQGNpZW5hLmNvbTEmMCQGA1UEAxMd |
| RXhhbXBsZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkwHhcNMTYwMzExMTg1MzM2WhcN |
| MTcwMzA2MTg1MzM2WjBnMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNV |
| BAoTCkNpZW5hIEluYy4xFzAVBgNVBAMUDnVzZXJAY2llbmEuY29tMR0wGwYJKoZI |
| hvcNAQkBFg51c2VyQGNpZW5hLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC |
| AQoCggEBAOxemcBsPn9tZsCa5o2JA6sQDC7A6JgCNXXl2VFzKLNNvB9PS6D7ZBsQ |
| 5An0zEDMNzi51q7lnrYg1XyiE4S8FzMGAFr94RlGMQJUbRD9V/oqszMX4k++iAOK |
| tIA1gr3x7Zi+0tkjVSVzXTmgNnhChAamdMsjYUG5+CY9WAicXyy+VEV3zTphZZDR |
| OjcjEp4m/TSXVPYPgYDXI40YZKX5BdvqykWtT/tIgZb48RS1NPyN/XkCYzl3bv21 |
| qx7Mc0fcEbsJBIIRYTUkfxnsilcnmLxSYO+p+DZ9uBLBzcQt+4Rd5pLSfi21WM39 |
| 2Z2oOi3vs/OYAPAqgmi2JWOv3mePa/8CAwEAAaNPME0wEwYDVR0lBAwwCgYIKwYB |
| BQUHAwIwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL3d3dy5leGFtcGxlLmNvbS9l |
| eGFtcGxlX2NhLmNybDANBgkqhkiG9w0BAQUFAAOCAQEALBzMPDTIB6sLyPl0T6JV |
| MjOkyldAVhXWiQsTjaGQGJUUe1cmUJyZbUZEc13MygXMPOM4x7z6VpXGuq1c/Vxn |
| VzQ2fNnbJcIAHi/7G8W5/SQfPesIVDsHTEc4ZspPi5jlS/MVX3HOC+BDbOjdbwqP |
| RX0JEr+uOyhjO+lRxG8ilMRACoBUbw1eDuVDoEBgErSUC44pq5ioDw2xelc+Y6hQ |
| dmtYwfY0DbvwxHtA495frLyPcastDiT/zre7NL51MyUDPjjYjghNQEwvu66IKbQ3 |
| T1tJBrgI7/WI+dqhKBFolKGKTDWIHsZXQvZ1snGu/FRYzg1l+R/jT8cRB9BDwhUt |
| yg== |
| -----END CERTIFICATE-----''' |
| |
| @classmethod |
| def update_apps_version(cls): |
| version = Onos.getVersion() |
| major = int(version.split('.')[0]) |
| minor = int(version.split('.')[1]) |
| cordigmp_app_version = '2.0-SNAPSHOT' |
| olt_app_version = '1.2-SNAPSHOT' |
| if major > 1: |
| cordigmp_app_version = '3.0-SNAPSHOT' |
| olt_app_version = '2.0-SNAPSHOT' |
| elif major == 1: |
| if minor > 10: |
| cordigmp_app_version = '3.0-SNAPSHOT' |
| olt_app_version = '2.0-SNAPSHOT' |
| elif minor <= 8: |
| olt_app_version = '1.1-SNAPSHOT' |
| cls.app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-{}.oar'.format(cordigmp_app_version)) |
| cls.table_app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-multitable-{}.oar'.format(cordigmp_app_version)) |
| cls.olt_app_file = os.path.join(cls.test_path, '..', 'apps/olt-app-{}.oar'.format(olt_app_version)) |
| |
| @classmethod |
| def dhcprelay_setUpClass(cls): |
| ''' Activate the dhcprelay app''' |
| OnosCtrl(cls.app_dhcp).deactivate() |
| time.sleep(3) |
| cls.onos_ctrl = OnosCtrl('org.onosproject.dhcprelay') |
| status, _ = cls.onos_ctrl.activate() |
| assert_equal(status, True) |
| time.sleep(3) |
| cls.dhcp_relay_setup() |
| ##start dhcpd initially with default config |
| cls.dhcpd_start() |
| |
| @classmethod |
| def dhcprelay_tearDownClass(cls): |
| '''Deactivate the dhcp relay app''' |
| try: |
| os.unlink('{}/dhcpd.conf'.format(cls.dhcp_data_dir)) |
| os.unlink('{}/dhcpd.leases'.format(cls.dhcp_data_dir)) |
| except: pass |
| cls.onos_ctrl.deactivate() |
| cls.dhcpd_stop() |
| cls.dhcp_relay_cleanup() |
| |
| @classmethod |
| def onos_load_config(cls, app, config): |
| status, code = OnosCtrl.config(config) |
| if status is False: |
| log_test.info('JSON config request for app %s returned status %d' %(app, code)) |
| assert_equal(status, True) |
| time.sleep(2) |
| |
| @classmethod |
| def onos_aaa_load(cls): |
| aaa_dict = {'apps' : { 'org.opencord.aaa' : { 'AAA' : { 'radiusSecret': 'radius_password', |
| 'radiusIp': '172.17.0.2' } } } } |
| radius_ip = os.getenv('ONOS_AAA_IP') or '172.17.0.2' |
| aaa_dict['apps']['org.opencord.aaa']['AAA']['radiusIp'] = radius_ip |
| cls.onos_load_config('org.opencord.aaa', aaa_dict) |
| |
| @classmethod |
| def onos_dhcp_table_load(self, config = None): |
| dhcp_dict = {'apps' : { 'org.onosproject.dhcp' : { 'dhcp' : copy.copy(self.dhcp_server_config) } } } |
| dhcp_config = dhcp_dict['apps']['org.onosproject.dhcp']['dhcp'] |
| if config: |
| for k in config.keys(): |
| if dhcp_config.has_key(k): |
| dhcp_config[k] = config[k] |
| self.onos_load_config('org.onosproject.dhcp', dhcp_dict) |
| |
| def dhcp_sndrcv(self, dhcp, update_seed = False, mac = None, validation = None): |
| if validation: |
| cip, sip = dhcp.discover(mac = mac, update_seed = update_seed) |
| assert_not_equal(cip, None) |
| assert_not_equal(sip, None) |
| log_test.info('Got dhcp client IP %s from server %s for mac %s' % |
| (cip, sip, dhcp.get_mac(cip)[0])) |
| if validation == False: |
| cip, sip = dhcp.discover(mac = mac, update_seed = update_seed) |
| assert_equal(cip, None) |
| assert_equal(sip, None) |
| log_test.info('Dhcp client did not get IP from server') |
| |
| if validation == 'skip': |
| cip, sip = dhcp.discover(mac = mac, update_seed = update_seed) |
| |
| return cip,sip |
| |
| def dhcp_request(self, onu_iface = None, seed_ip = '10.10.10.1', update_seed = False, validation = None, startip = '10.10.10.20', mac = None): |
| config = {'startip':startip, 'endip':'10.10.10.200', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| dhcp = DHCPTest(seed_ip = seed_ip, iface =onu_iface) |
| cip, sip = self.dhcp_sndrcv(dhcp, update_seed = update_seed, validation = validation, mac = mac) |
| return cip, sip |
| |
| @classmethod |
| def setUpClass(cls): |
| cls.update_apps_version() |
| cls.voltha_attrs = dict(host = cls.VOLTHA_HOST, |
| rest_port = cls.VOLTHA_REST_PORT, |
| uplink_vlan_map = cls.VOLTHA_UPLINK_VLAN_MAP, |
| uplink_vlan_start = cls.VOLTHA_UPLINK_VLAN_START) |
| cls.voltha = VolthaCtrl(**cls.voltha_attrs) |
| cls.install_app_table() |
| cls.olt = OltConfig(olt_conf_file = cls.olt_conf_file) |
| cls.port_map, cls.port_list = cls.olt.olt_port_map() |
| cls.switches = cls.port_map['switches'] |
| cls.ponsim_ports = cls.port_map['ponsim'] |
| cls.num_ports = cls.port_map['num_ports'] |
| if cls.num_ports > 1: |
| cls.num_ports -= 1 ##account for the tx port |
| cls.activate_apps(cls.apps + cls.olt_apps, deactivate = True) |
| cls.onos_aaa_load() |
| |
| @classmethod |
| def tearDownClass(cls): |
| '''Deactivate the olt apps and restart OVS back''' |
| apps = cls.olt_apps + ( cls.table_app,) |
| for app in apps: |
| onos_ctrl = OnosCtrl(app) |
| onos_ctrl.deactivate() |
| cls.install_app_igmp() |
| @classmethod |
| def install_app_igmp(cls): |
| ##Uninstall the table app on class exit |
| OnosCtrl.uninstall_app(cls.table_app) |
| time.sleep(2) |
| log_test.info('Installing back the cord igmp app %s for subscriber test on exit' %(cls.app_file)) |
| OnosCtrl.install_app(cls.app_file) |
| |
| def remove_olt(self, switch_map): |
| controller = get_controller() |
| auth = ('karaf', 'karaf') |
| #remove subscriber for every port on all the voltha devices |
| for device, device_map in switch_map.iteritems(): |
| uni_ports = device_map['ports'] |
| uplink_vlan = device_map['uplink_vlan'] |
| for port in uni_ports: |
| rest_url = 'http://{}:8181/onos/olt/oltapp/{}/{}'.format(controller, |
| device, |
| port) |
| resp = requests.delete(rest_url, auth = auth) |
| if resp.status_code not in [204, 202, 200]: |
| log_test.error('Error deleting subscriber for device %s on port %s' %(device, port)) |
| else: |
| log_test.info('Deleted subscriber for device %s on port %s' %(device, port)) |
| OnosCtrl.uninstall_app(self.olt_app_file) |
| |
| def config_olt(self, switch_map): |
| controller = get_controller() |
| auth = ('karaf', 'karaf') |
| #configure subscriber for every port on all the voltha devices |
| for device, device_map in switch_map.iteritems(): |
| uni_ports = device_map['ports'] |
| uplink_vlan = device_map['uplink_vlan'] |
| for port in uni_ports: |
| vlan = port |
| rest_url = 'http://{}:8181/onos/olt/oltapp/{}/{}/{}'.format(controller, |
| device, |
| port, |
| vlan) |
| resp = requests.post(rest_url, auth = auth) |
| #assert_equal(resp.ok, True) |
| |
| def voltha_uni_port_toggle(self, uni_port = None): |
| ## Admin state of port is down and up |
| if not uni_port: |
| uni_port = self.INTF_RX_DEFAULT |
| cmd = 'ifconfig {} down'.format(uni_port) |
| os.system(cmd) |
| log_test.info('Admin state of uni_port is down') |
| time.sleep(30) |
| cmd = 'ifconfig {} up'.format(uni_port) |
| os.system(cmd) |
| log_test.info('Admin state of uni_port is up now') |
| time.sleep(30) |
| return |
| |
| @classmethod |
| def install_app_table(cls): |
| ##Uninstall the existing app if any |
| OnosCtrl.uninstall_app(cls.table_app) |
| time.sleep(2) |
| log_test.info('Installing the multi table app %s for subscriber test' %(cls.table_app_file)) |
| OnosCtrl.install_app(cls.table_app_file) |
| time.sleep(3) |
| |
| @classmethod |
| def activate_apps(cls, apps, deactivate = False): |
| for app in apps: |
| onos_ctrl = OnosCtrl(app) |
| if deactivate is True: |
| onos_ctrl.deactivate() |
| time.sleep(2) |
| status, _ = onos_ctrl.activate() |
| assert_equal(status, True) |
| time.sleep(2) |
| |
| |
| |
| @classmethod |
| def deactivate_apps(cls, apps): |
| cls.success = True |
| for app in apps: |
| onos_ctrl = OnosCtrl(app) |
| status, _ = onos_ctrl.deactivate() |
| if status is False: |
| cls.success = False |
| # assert_equal(status, True) |
| time.sleep(2) |
| |
| def random_ip(self,start_ip = '10.10.10.20', end_ip = '10.10.10.65'): |
| start = list(map(int, start_ip.split("."))) |
| end = list(map(int, end_ip.split("."))) |
| temp = start |
| ip_range = [] |
| ip_range.append(start_ip) |
| while temp != end: |
| start[3] += 1 |
| for i in (3, 2, 1): |
| if temp[i] == 255: |
| temp[i] = 0 |
| temp[i-1] += 1 |
| ip_range.append(".".join(map(str, temp))) |
| return random.choice(ip_range) |
| |
| def random_mcast_ip(self,start_ip = '224.0.1.0', end_ip = '224.0.1.100'): |
| start = list(map(int, start_ip.split("."))) |
| end = list(map(int, end_ip.split("."))) |
| temp = start |
| ip_range = [] |
| ip_range.append(start_ip) |
| while temp != end: |
| start[3] += 1 |
| for i in (3, 2, 1): |
| if temp[i] == 255: |
| temp[i] = 0 |
| temp[i-1] += 1 |
| ip_range.append(".".join(map(str, temp))) |
| return random.choice(ip_range) |
| |
| @classmethod |
| def dhcp_relay_setup(cls): |
| #did = OnosCtrl.get_device_id() |
| #cls.relay_device_id = did |
| #cls.olt = OltConfig(olt_conf_file = cls.olt_conf_file) |
| #cls.port_map, _ = cls.olt.olt_port_map() self.port_map['ports'][port_list[1][1]] |
| if cls.port_map: |
| ##Per subscriber, we use 1 relay port |
| try: |
| relay_port = cls.port_map['ports'] |
| except: |
| relay_port = cls.port_map['uplink'] |
| cls.relay_interface_port = relay_port |
| cls.relay_interfaces = (cls.port_map[cls.relay_interface_port],) |
| else: |
| # cls.relay_interface_port = 100 |
| # cls.relay_interfaces = (g_subscriber_port_map[cls.relay_interface_port],) |
| log_test.info('No ONU ports are available, hence returning nothing') |
| cls.relay_interfaces_last = cls.relay_interfaces |
| if cls.port_map: |
| ##generate a ip/mac client virtual interface config for onos |
| interface_list = [] |
| for port in cls.port_map['ports']: |
| port_num = cls.port_map[port] |
| if port_num == cls.port_map['uplink']: |
| continue |
| ip = cls.get_host_ip(port_num) |
| mac = cls.get_mac(port) |
| interface_list.append((port_num, ip, mac)) |
| |
| #configure dhcp server virtual interface on the same subnet as first client interface |
| relay_ip = cls.get_host_ip(interface_list[0][0]) |
| relay_mac = cls.get_mac(cls.port_map[cls.relay_interface_port]) |
| interface_list.append((cls.relay_interface_port, relay_ip, relay_mac)) |
| cls.onos_interface_load(interface_list) |
| |
| @classmethod |
| def onos_interface_load(cls, interface_list): |
| interface_dict = { 'ports': {} } |
| for port_num, ip, mac in interface_list: |
| port_map = interface_dict['ports'] |
| port = '{}/{}'.format(cls.relay_device_id, port_num) |
| port_map[port] = { 'interfaces': [] } |
| interface_list = port_map[port]['interfaces'] |
| interface_map = { 'ips' : [ '{}/{}'.format(ip, 24) ], |
| 'mac' : mac, |
| 'name': 'vir-{}'.format(port_num) |
| } |
| interface_list.append(interface_map) |
| |
| cls.onos_load_config(interface_dict) |
| cls.configs['interface_config'] = interface_dict |
| |
| @classmethod |
| def get_host_ip(cls, port): |
| if cls.host_ip_map.has_key(port): |
| return cls.host_ip_map[port] |
| cls.host_ip_map[port] = '192.168.1.{}'.format(port) |
| return cls.host_ip_map[port] |
| |
| @classmethod |
| def host_load(cls, iface): |
| '''Have ONOS discover the hosts for dhcp-relay responses''' |
| port = g_subscriber_port_map[iface] |
| host = '173.17.1.{}'.format(port) |
| cmds = ( 'ifconfig {} 0'.format(iface), |
| 'ifconfig {0} {1}'.format(iface, host), |
| 'arping -I {0} {1} -c 2'.format(iface, host), |
| 'ifconfig {} 0'.format(iface), ) |
| for c in cmds: |
| os.system(c) |
| |
| @classmethod |
| def dhcpd_conf_generate(cls, config = default_config, options = default_options, |
| subnet = default_subnet_config): |
| conf = '' |
| for k, v in config.items(): |
| conf += '{} {};\n'.format(k, v) |
| |
| opts = '' |
| for k, v in options: |
| opts += 'option {} {};\n'.format(k, v) |
| |
| subnet_config = '' |
| for _, v in subnet: |
| subnet_config += '{}\n'.format(v) |
| |
| return '{}{}{}'.format(conf, opts, subnet_config) |
| |
| @classmethod |
| def dhcpd_start(cls, intf_list = None, |
| config = default_config, options = default_options, |
| subnet = default_subnet_config): |
| '''Start the dhcpd server by generating the conf file''' |
| if intf_list is None: |
| intf_list = cls.relay_interfaces |
| ##stop dhcpd if already running |
| cls.dhcpd_stop() |
| dhcp_conf = cls.dhcpd_conf_generate(config = config, options = options, |
| subnet = subnet) |
| ##first touch dhcpd.leases if it doesn't exist |
| lease_file = '{}/dhcpd.leases'.format(cls.dhcp_data_dir) |
| if os.access(lease_file, os.F_OK) is False: |
| with open(lease_file, 'w') as fd: pass |
| |
| conf_file = '{}/dhcpd.conf'.format(cls.dhcp_data_dir) |
| with open(conf_file, 'w') as fd: |
| fd.write(dhcp_conf) |
| |
| #now configure the dhcpd interfaces for various subnets |
| index = 0 |
| intf_info = [] |
| for ip,_ in subnet: |
| intf = intf_list[index] |
| mac = cls.get_mac(intf) |
| intf_info.append((ip, mac)) |
| index += 1 |
| os.system('ifconfig {} {}'.format(intf, ip)) |
| |
| intf_str = ','.join(intf_list) |
| dhcpd_cmd = '/usr/sbin/dhcpd -4 --no-pid -cf {0} -lf {1} {2}'.format(conf_file, lease_file, intf_str) |
| log_test.info('Starting DHCPD server with command: %s' %dhcpd_cmd) |
| ret = os.system(dhcpd_cmd) |
| assert_equal(ret, 0) |
| time.sleep(3) |
| cls.relay_interfaces_last = cls.relay_interfaces |
| cls.relay_interfaces = intf_list |
| cls.onos_dhcp_relay_load(*intf_info[0]) |
| |
| @classmethod |
| def dhcpd_stop(cls): |
| os.system('pkill -9 dhcpd') |
| for intf in cls.relay_interfaces: |
| os.system('ifconfig {} 0'.format(intf)) |
| |
| cls.relay_interfaces = cls.relay_interfaces_last |
| |
| @classmethod |
| def get_mac(cls, iface): |
| if cls.interface_to_mac_map.has_key(iface): |
| return cls.interface_to_mac_map[iface] |
| mac = get_mac(iface, pad = 0) |
| cls.interface_to_mac_map[iface] = mac |
| return mac |
| |
| def send_recv(self, mac=None, update_seed = False, validate = True): |
| cip, sip = self.dhcp.discover(mac = mac, update_seed = update_seed) |
| if validate: |
| assert_not_equal(cip, None) |
| assert_not_equal(sip, None) |
| log_test.info('Got dhcp client IP %s from server %s for mac %s' % |
| (cip, sip, self.dhcp.get_mac(cip)[0])) |
| return cip,sip |
| |
| @classmethod |
| def dhcpd_conf_generate(cls, config = default_config, options = default_options, |
| subnet = default_subnet_config): |
| conf = '' |
| for k, v in config.items(): |
| conf += '{} {};\n'.format(k, v) |
| |
| opts = '' |
| for k, v in options: |
| opts += 'option {} {};\n'.format(k, v) |
| |
| subnet_config = '' |
| for _, v in subnet: |
| subnet_config += '{}\n'.format(v) |
| |
| return '{}{}{}'.format(conf, opts, subnet_config) |
| |
| @classmethod |
| def onos_dhcp_relay_load(cls, server_ip, server_mac): |
| relay_device_map = '{}/{}'.format(cls.relay_device_id, cls.relay_interface_port) |
| dhcp_dict = {'apps':{'org.onosproject.dhcp-relay':{'dhcprelay': |
| {'dhcpserverConnectPoint':relay_device_map, |
| 'serverip':server_ip, |
| 'servermac':server_mac |
| } |
| } |
| } |
| } |
| cls.onos_load_config(dhcp_dict) |
| cls.configs['relay_config'] = dhcp_dict |
| |
| @classmethod |
| def dhcp_relay_cleanup(cls): |
| ##reset the ONOS port configuration back to default |
| for config in cls.configs.items(): |
| OnosCtrl.delete(config) |
| # if cls.onos_restartable is True: |
| # log_test.info('Cleaning up dhcp relay config by restarting ONOS with default network cfg') |
| # return cord_test_onos_restart(config = {}) |
| |
| |
| def tls_flow_check(self, olt_ports, cert_info = None, multiple_sub = False): |
| if multiple_sub is True: |
| olt_nni_port = olt_ports.tx_port |
| olt_uni_port = olt_ports.rx_port |
| else: |
| olt_uni_port = olt_ports |
| |
| def tls_fail_cb(): |
| log_test.info('TLS verification failed') |
| if cert_info is None: |
| tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port) |
| log_test.info('Running subscriber %s tls auth test with valid TLS certificate' %olt_uni_port) |
| tls.runTest() |
| if tls.failTest is True: |
| self.success = False |
| assert_equal(tls.failTest, False) |
| if cert_info == "no_cert": |
| tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = '') |
| log_test.info('Running subscriber %s tls auth test with no TLS certificate' %olt_uni_port) |
| tls.runTest() |
| if tls.failTest is False: |
| self.success = False |
| assert_equal(tls.failTest, True) |
| if cert_info == "invalid_cert": |
| tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = self.CLIENT_CERT_INVALID) |
| log_test.info('Running subscriber %s tls auth test with invalid TLS certificate' %olt_uni_port) |
| tls.runTest() |
| if tls.failTest is False: |
| self.success = False |
| assert_equal(tls.failTest, True) |
| if cert_info == "same_cert": |
| tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port) |
| log_test.info('Running subscriber %s tls auth test with invalid TLS certificate' %olt_uni_port) |
| tls.runTest() |
| if tls.failTest is False: |
| self.success = False |
| assert_equal(tls.failTest, True) |
| if cert_info == "app_deactivate" or cert_info == "restart_radius" or cert_info == "disable_olt_device" or \ |
| cert_info == "uni_port_admin_down" or cert_info == "restart_olt_device" or cert_info == "restart_onu_device": |
| tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = olt_uni_port, client_cert = self.CLIENT_CERT_INVALID) |
| log_test.info('Running subscriber %s tls auth test with %s' %(olt_uni_port,cert_info)) |
| tls.runTest() |
| if tls.failTest is False: |
| self.success = False |
| assert_equal(tls.failTest, True) |
| self.test_status = True |
| return self.test_status |
| |
| def dhcp_flow_check(self, olt_ports, negative_test = None, multiple_sub = False): |
| if multiple_sub is True: |
| olt_nni_port = olt_ports.tx_port |
| onu_iface = olt_ports.rx_port |
| dhcp_server_startip = self.random_ip() |
| random_mac = '00:00:00:0a:0a:' + hex(random.randrange(50,254)).split('x')[1] |
| else: |
| onu_iface = olt_ports |
| dhcp_server_startip = '10.10.10.20' |
| random_mac = None |
| self.success = True |
| |
| if negative_test is None: |
| cip, sip = self.dhcp_request(onu_iface, update_seed = True, validation = 'skip', startip = dhcp_server_startip, mac = random_mac) |
| if cip == None or sip == None: |
| self.success = False |
| self.test_status = False |
| assert_not_equal(cip,None) |
| assert_not_equal(sip,None) |
| else: |
| log_test.info('Subscriber %s client ip %s from server %s' %(onu_iface, cip, sip)) |
| self.test_status = True |
| |
| if negative_test == "interrupting_dhcp_flows": |
| cip, sip = self.dhcp_request(onu_iface, update_seed = True, validation = False) |
| if cip is not None: |
| self.success = False |
| assert_equal(cip,None) |
| log_test.info('Subscriber %s not got client ip %s from server' %(onu_iface, cip)) |
| self.test_status = True |
| |
| if negative_test == "invalid_src_mac_broadcast": |
| config = {'startip':'10.10.10.20', 'endip':'10.10.10.69', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover(mac='ff:ff:ff:ff:ff:ff') |
| |
| if cip is not None: |
| self.success = False |
| log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected self.success = %s '%self.success) |
| assert_equal(cip,None) |
| log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected') |
| self.test_status = True |
| |
| if negative_test == "invalid_src_mac_multicast": |
| config = {'startip':'10.10.10.20', 'endip':'10.10.10.69', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover(mac='01:80:c2:91:02:e4') |
| if cip is not None: |
| self.success = False |
| assert_equal(cip,None) |
| log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected') |
| self.test_status = True |
| |
| if negative_test == "invalid_src_mac_junk": |
| config = {'startip':'10.10.10.20', 'endip':'10.10.10.69', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover(mac='00:00:00:00:00:00') |
| if cip is not None: |
| self.success = False |
| assert_equal(cip,None) |
| log_test.info('ONOS dhcp server rejected client discover with invalid source mac as expected') |
| self.test_status = True |
| |
| if negative_test == "request_release": |
| config = {'startip':'10.10.100.20', 'endip':'10.10.100.230', |
| 'ip':'10.10.100.2', 'mac': "ca:fe:ca:fe:8a:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.100.255', 'router':'10.10.100.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.100.10', iface = onu_iface) |
| cip, sip = self.dhcp_sndrcv(self.dhcp) |
| log_test.info('Releasing ip %s to server %s' %(cip, sip)) |
| if not self.dhcp.release(cip): |
| self.success = False |
| assert_equal(self.dhcp.release(cip), True) |
| log_test.info('Triggering DHCP discover again after release') |
| cip2, sip2 = self.dhcp_sndrcv(self.dhcp, update_seed = True) |
| log_test.info('Verifying released IP was given back on rediscover') |
| if not cip == cip2: |
| self.success = False |
| assert_equal(cip, cip2) |
| log_test.info('Test done. Releasing ip %s to server %s' %(cip2, sip2)) |
| assert_equal(self.dhcp.release(cip2), True) |
| self.test_status = True |
| |
| if negative_test == "starvation_positive": |
| config = {'startip':'193.170.1.20', 'endip':'193.170.1.69', |
| 'ip':'193.170.1.2', 'mac': "ca:fe:c2:fe:cc:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'192.168.1.255', 'router': '192.168.1.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '192.169.1.1', iface = onu_iface) |
| ip_map = {} |
| for i in range(10): |
| cip, sip = self.dhcp_sndrcv(self.dhcp, update_seed = True) |
| if ip_map.has_key(cip): |
| self.success = False |
| log_test.info('IP %s given out multiple times' %cip) |
| assert_equal(False, ip_map.has_key(cip)) |
| ip_map[cip] = sip |
| self.test_status = True |
| |
| if negative_test == "starvation_negative": |
| config = {'startip':'182.17.0.20', 'endip':'182.17.0.69', |
| 'ip':'182.17.0.2', 'mac': "ca:fe:c3:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'182.17.0.255', 'router':'182.17.0.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '182.17.0.1', iface = onu_iface) |
| log_test.info('Verifying passitive case') |
| for x in xrange(50): |
| mac = RandMAC()._fix() |
| self.dhcp_sndrcv(self.dhcp,mac = mac) |
| log_test.info('Verifying negative case') |
| cip, sip = self.dhcp_sndrcv(self.dhcp,update_seed = True) |
| if cip or sip is not None: |
| self.success = False |
| assert_equal(cip, None) |
| assert_equal(sip, None) |
| self.test_status = True |
| self.success = True |
| |
| if negative_test == "multiple_discover": |
| config = {'startip':'10.10.10.20', 'endip':'10.10.10.69', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover() |
| log_test.info('Got dhcp client IP %s from server %s for mac %s . Not going to send DHCPREQUEST.' % |
| (cip, sip, mac) ) |
| if cip is None: |
| self.success = False |
| assert_not_equal(cip, None) |
| log_test.info('Triggering DHCP discover again.') |
| new_cip, new_sip, new_mac, _ = self.dhcp.only_discover() |
| if not new_cip == cip: |
| self.success = False |
| assert_equal(new_cip, cip) |
| log_test.info('client got same IP as expected when sent 2nd discovery') |
| self.test_status = True |
| # self.success = True |
| if negative_test == "multiple_requests": |
| config = {'startip':'10.10.10.20', 'endip':'10.10.10.69', |
| 'ip':'10.10.10.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'10.10.10.255', 'router':'10.10.10.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = onu_iface) |
| log_test.info('Sending DHCP discover and DHCP request.') |
| cip, sip = self.dhcp_sndrcv(self.dhcp,update_seed = True) |
| mac = self.dhcp.get_mac(cip)[0] |
| log_test.info("Sending DHCP request again.") |
| new_cip, new_sip = self.dhcp.only_request(cip, mac) |
| assert_equal(new_cip,cip) |
| log_test.info('server offered same IP to clain for multiple requests, as expected') |
| self.test_status = True |
| # self.success = True |
| if negative_test == "desired_ip_address": |
| config = {'startip':'20.20.20.30', 'endip':'20.20.20.69', |
| 'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '20.20.20.50', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover(desired = True) |
| if cip or sip is None: |
| self.success = False |
| assert_not_equal(cip, None) |
| log_test.info('Got dhcp client IP %s from server %s for mac %s .' % |
| (cip, sip, mac)) |
| if not self.dhcp.seed_ip == cip: |
| self.success = False |
| assert_equal(cip,self.dhcp.seed_ip) |
| log_test.info('ONOS dhcp server offered client requested IP %s as expected'%self.dhcp.seed_ip) |
| self.test_status = True |
| # self.success = True |
| if negative_test == "desired_out_of_pool_ip_address": |
| config = {'startip':'20.20.20.30', 'endip':'20.20.20.69', |
| 'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '20.20.20.75', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover(desired = True) |
| if cip or sip is None: |
| self.success = False |
| assert_not_equal(cip, None) |
| log_test.info('Got dhcp client IP %s from server %s for mac %s .' % |
| (cip, sip, mac) ) |
| if self.dhcp.seed_ip == cip: |
| self.success = False |
| assert_not_equal(cip,self.dhcp.seed_ip) |
| log_test.info('server offered IP from its pool of IPs when requested out of pool IP, as expected') |
| self.test_status = True |
| # self.success = True |
| if negative_test == "dhcp_renew": |
| config = {'startip':'20.20.20.30', 'endip':'20.20.20.69', |
| 'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '20.20.20.45', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover() |
| log_test.info('Got dhcp client IP %s from server %s for mac %s .' % |
| (cip, sip, mac) ) |
| if cip or sip is None: |
| self.success = False |
| assert_not_equal(cip, None) |
| new_cip, new_sip, lval = self.dhcp.only_request(cip, mac, renew_time = True) |
| log_test.info('waiting renew time %d seconds to send next request packet'%lval) |
| time.sleep(lval) |
| latest_cip, latest_sip, lval = self.dhcp.only_request(cip, mac, renew_time = True) |
| if not latest_cip == cip: |
| self.success = False |
| assert_equal(latest_cip,cip) |
| log_test.info('client got same IP after renew time, as expected') |
| self.test_status = True |
| # self.success = True |
| if negative_test == "dhcp_rebind": |
| config = {'startip':'20.20.20.30', 'endip':'20.20.20.69', |
| 'ip':'20.20.20.2', 'mac': "ca:fe:ca:fe:ca:fe", |
| 'subnet': '255.255.255.0', 'broadcast':'20.20.20.255', 'router':'20.20.20.1'} |
| self.onos_dhcp_table_load(config) |
| self.dhcp = DHCPTest(seed_ip = '20.20.20.45', iface = onu_iface) |
| cip, sip, mac, _ = self.dhcp.only_discover() |
| log_test.info('Got dhcp client IP %s from server %s for mac %s .' % |
| (cip, sip, mac) ) |
| if cip or sip is None: |
| self.success = False |
| assert_not_equal(cip, None) |
| new_cip, new_sip, lval = self.dhcp.only_request(cip, mac, rebind_time = True) |
| log_test.info('waiting rebind time %d seconds to send next request packet'%lval) |
| time.sleep(lval) |
| latest_cip, latest_sip = self.dhcp.only_request(new_cip, mac) |
| if not latest_cip == cip: |
| self.success = False |
| assert_equal(latest_cip,cip) |
| log_test.info('client got same IP after rebind time, as expected') |
| self.test_status = True |
| # self.success = True |
| return self.test_status |
| |
| def recv_channel_cb(self, pkt): |
| ##First verify that we have received the packet for the joined instance |
| chan = self.subscriber.caddr(pkt[IP].dst) |
| assert_equal(chan in self.subscriber.join_map.keys(), True) |
| recv_time = monotonic.monotonic() * 1000000 |
| join_time = self.subscriber.join_map[chan][self.subscriber.STATS_JOIN].start |
| delta = recv_time - join_time |
| self.subscriber.join_rx_stats.update(packets=1, t = delta, usecs = True) |
| self.subscriber.channel_update(chan, self.subscriber.STATS_RX, 1, t = delta) |
| log_test.debug('Packet received in %.3f usecs for group %s after join' %(delta, pkt[IP].dst)) |
| self.test_status = True |
| |
| def traffic_verify(self, subscriber): |
| # if subscriber.has_service('TRAFFIC'): |
| url = 'http://www.google.com' |
| resp = requests.get(url) |
| self.test_status = resp.ok |
| if resp.ok == False: |
| log_test.info('Subscriber %s failed get from url %s with status code %d' |
| %(subscriber.name, url, resp.status_code)) |
| else: |
| log_test.info('GET request from %s succeeded for subscriber %s' |
| %(url, subscriber.name)) |
| return self.test_status |
| |
| def igmp_flow_check(self, subscriber, multiple_sub = False): |
| chan = 0 |
| for i in range(self.VOLTHA_IGMP_ITERATIONS + subscriber.num_channels): |
| if subscriber.num_channels == 1: |
| chan = subscriber.channel_join(chan, delay = 2, src_list = subscriber.src_list) |
| else: |
| chan = subscriber.channel_join_next(delay = 2, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| # for i in range(1): |
| time.sleep(0.5) |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1, src_list = subscriber.src_list) |
| #log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| #subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| time.sleep(5) |
| # log_test.info('Interface %s Join RX stats for subscriber, %s' %(subscriber.iface,subscriber.join_rx_stats)) |
| if subscriber.num_channels == 1: |
| pass |
| elif chan != 0: |
| #Should not receive packets for this channel |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| subscriber.channel_receive(chan-1, cb = subscriber.recv_channel_cb, count = 1, src_list = subscriber.src_list) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| # log_test.info('Joining channel %d for subscriber port %s' %(chan, subscriber.rx_port)) |
| # subscriber.channel_join(chan, delay = 2, src_list = subscriber.src_list) |
| chan = subscriber.num_channels - i |
| # self.test_status = True |
| return self.test_status |
| |
| def igmp_leave_flow_check(self, subscriber, multiple_sub = False): |
| chan = 0 |
| for i in range(self.VOLTHA_IGMP_ITERATIONS): |
| subscriber.channel_join(chan, delay = 2, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| # for i in range(1): |
| time.sleep(0.5) |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1, src_list = subscriber.src_list) |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| time.sleep(10) |
| # log_test.info('Interface %s Join RX stats for subscriber, %s' %(subscriber.iface,subscriber.join_rx_stats)) |
| #Should not receive packets for this subscriber |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1, src_list = subscriber.src_list) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| # log_test.info('Joining channel %d for subscriber port %s' %(chan, subscriber.rx_port)) |
| # subscriber.channel_join(chan, delay = 2, src_list = subscriber.src_list) |
| # self.test_status = True |
| return self.test_status |
| |
| |
| |
| def igmp_flow_check_join_change_to_exclude(self, subscriber, multiple_sub = False): |
| chan = 2 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| time.sleep(5) |
| chan = 1 |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list, record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1]) |
| if self.test_status is True: |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0]) |
| if self.test_status is True: |
| log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port)) |
| self.test_status = False |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| chan = 0 |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| # self.test_status = True |
| return self.test_status |
| |
| def igmp_flow_check_join_change_to_exclude_again_include_back(self, subscriber, multiple_sub = False): |
| chan = 2 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| time.sleep(5) |
| chan = 1 |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port,)) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1]) |
| if self.test_status is True: |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0]) |
| if self.test_status is True: |
| log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port)) |
| self.test_status = False |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| chan = 1 |
| log_test.info('Again include the channel %s on port %s with souce list ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0])) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list, record_type = IGMP_V3_GR_TYPE_CHANGE_TO_INCLUDE) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0]) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| chan = 2 |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| # self.test_status = True |
| return self.test_status |
| |
| def igmp_flow_check_join_change_to_block(self, subscriber, multiple_sub = False): |
| chan = 0 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| time.sleep(5) |
| log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0])) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_BLOCK_OLD) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1]) |
| if self.test_status is True: |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0]) |
| if self.test_status is True: |
| log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port)) |
| self.test_status = False |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| return self.test_status |
| |
| def igmp_flow_check_join_change_to_block_again_allow_back(self, subscriber, multiple_sub = False): |
| chan = 0 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| time.sleep(5) |
| log_test.info('Leaving channel %d for subscriber on port %s from specific source ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0])) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[1]) |
| if self.test_status is True: |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list[0]) |
| if self.test_status is True: |
| log_test.info('Subscriber should not receive data from channel %s on specific source %s, test is failed' %(chan, subscriber.rx_port)) |
| self.test_status = False |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| log_test.info('Again include the source list in the group %s souce ip %s' %(chan, subscriber.rx_port,subscriber.src_list[0])) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list[0], record_type = IGMP_V3_GR_TYPE_ALLOW_NEW) |
| time.sleep(5) |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| return self.test_status |
| |
| def igmp_flow_check_group_include_source_empty_list(self, subscriber, multiple_sub = False): |
| chan = 0 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10) |
| if self.test_status is True: |
| log_test.info('Subscriber should not receive data from channel %s on any specific source %s, test is failed' %(chan, subscriber.rx_port)) |
| self.test_status = False |
| else: |
| log_test.info('Subscriber not receive data from channel %s on any specific source %s' %(chan, subscriber.rx_port)) |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| time.sleep(5) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| return self.test_status |
| |
| def igmp_flow_check_group_exclude_source_empty_list(self, subscriber, multiple_sub = False): |
| chan = 0 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list,record_type = IGMP_V3_GR_TYPE_CHANGE_TO_EXCLUDE) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| for i in range(10): |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| time.sleep(5) |
| log_test.info('Interface %s Join RX stats for subscriber, %s' %(subscriber.iface,subscriber.join_rx_stats)) |
| #Should not receive packets for this subscriber |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| log_test.info('Joining channel %d for subscriber port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| # self.test_status = True |
| return self.test_status |
| |
| def igmp_flow_check_during_olt_onu_operational_issues(self, subscriber, multiple_sub = False): |
| chan = 0 |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| self.num_joins += 1 |
| while self.num_joins < self.num_subscribers: |
| time.sleep(5) |
| log_test.info('All subscribers have joined the channel') |
| for i in range(2): |
| self.test_status = subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| log_test.info('Leaving channel %d for subscriber on port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_leave(chan, src_list = subscriber.src_list) |
| time.sleep(5) |
| log_test.info('Interface %s Join RX stats for subscriber, %s' %(subscriber.iface,subscriber.join_rx_stats)) |
| #Should not receive packets for this subscriber |
| self.recv_timeout = True |
| subscriber.recv_timeout = True |
| subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10, src_list = subscriber.src_list) |
| subscriber.recv_timeout = False |
| self.recv_timeout = False |
| log_test.info('Joining channel %d for subscriber port %s' %(chan, subscriber.rx_port)) |
| subscriber.channel_join(chan, delay = 0, src_list = subscriber.src_list) |
| # self.test_status = True |
| return self.test_status |
| |
| def voltha_igmp_jump_verify(self, subscriber): |
| if subscriber.has_service('IGMP'): |
| for i in xrange(subscriber.num): |
| log_test.info('Subscriber %s jumping channel' %subscriber.name) |
| chan = subscriber.channel_jump(delay=0) |
| subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1) |
| log_test.info('Verified receive for channel %d, subscriber %s' %(chan, subscriber.name)) |
| time.sleep(3) |
| log_test.info('Interface %s Jump RX stats for subscriber %s, %s' %(subscriber.iface, subscriber.name, subscriber.join_rx_stats)) |
| self.test_status = True |
| return self.test_status |
| |
| def voltha_igmp_next_verify(self, subscriber): |
| for c in xrange(self.VOLTHA_IGMP_ITERATIONS): |
| for i in xrange(subscriber.num): |
| if i: |
| chan = subscriber.channel_join_next(delay=0, leave_flag = self.leave_flag) |
| time.sleep(0.2) |
| else: |
| chan = subscriber.channel_join(i, delay=0) |
| time.sleep(0.2) |
| if subscriber.num == 1: |
| subscriber.channel_leave(chan) |
| log_test.info('Joined next channel %d for subscriber %s' %(chan, subscriber.name)) |
| #subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count=1) |
| #log_test.info('Verified receive for channel %d, subscriber %s' %(chan, subscriber.name)) |
| self.test_status = True |
| return self.test_status |
| |
| def voltha_subscribers(self, services, cbs = None, num_subscribers = 1, num_channels = 1, src_list = None): |
| """Test subscriber join next for channel surfing""" |
| voltha = VolthaCtrl(self.VOLTHA_HOST, |
| rest_port = self.VOLTHA_REST_PORT, |
| uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP) |
| if self.VOLTHA_OLT_TYPE.startswith('ponsim'): |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| log_test.info('Enabling ponsim olt') |
| device_id, status = voltha.enable_device(self.VOLTHA_OLT_TYPE, address = ponsim_address) |
| if device_id != '': |
| self.olt_device_id = device_id |
| else: |
| log_test.info('This setup test cases is developed on ponsim olt only, hence stop execution') |
| assert_equal(False, True) |
| |
| assert_not_equal(device_id, None) |
| if status == False: |
| voltha.disable_device(device_id, delete = True) |
| assert_equal(status, True) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| try: |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| if not switch_map: |
| log_test.info('No voltha devices found') |
| return |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| self.num_subscribers = num_subscribers |
| self.num_channels = num_channels |
| test_status = self.subscriber_flows_check(num_subscribers = self.num_subscribers, |
| num_channels = self.num_channels, |
| cbs = cbs, |
| port_list = self.generate_port_list(self.num_subscribers, |
| self.num_channels), |
| src_list = src_list, services = services) |
| if test_status is False: |
| self.success = False |
| assert_equal(test_status, True) |
| finally: |
| if switch_map is not None: |
| if olt_configured is True: |
| self.remove_olt(switch_map) |
| voltha.disable_device(device_id, delete = True) |
| time.sleep(10) |
| log_test.info('Uninstalling OLT app') |
| OnosCtrl.uninstall_app(self.olt_app_name) |
| |
| def subscriber_flows_check( self, num_subscribers = 1, num_channels = 1, |
| channel_start = 0, cbs = None, port_list = [], src_list = None, |
| services = None, negative_subscriber_auth = None): |
| self.test_status = False |
| self.ovs_cleanup() |
| subscribers_count = num_subscribers |
| sub_loop_count = num_subscribers |
| if not port_list: |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| subscriber_tx_rx_ports = [] |
| for i in range(num_subscribers): |
| subscriber_tx_rx_ports.append(Voltha_olt_subscribers(tx_port = self.port_map[port_list[i][0]], |
| rx_port = self.port_map[port_list[i][1]], |
| num_channels = num_channels,src_list = src_list,)) |
| self.onos_aaa_load() |
| #load the ssm list for all subscriber channels |
| igmpChannel = IgmpChannel(src_list = src_list) |
| ssm_groups = map(lambda sub: sub.channels, subscriber_tx_rx_ports) |
| ssm_list = reduce(lambda ssm1, ssm2: ssm1+ssm2, ssm_groups) |
| if src_list is None: |
| igmpChannel = IgmpChannel() |
| igmpChannel.igmp_load_ssm_config(ssm_list) |
| else: |
| igmpChannel = IgmpChannel(src_list = src_list) |
| igmpChannel.igmp_load_ssm_config(ssm_list, src_list= src_list) |
| |
| self.thread_pool = ThreadPool(min(100, subscribers_count), queue_size=1, wait_timeout=1) |
| |
| chan_leave = False #for single channel, multiple subscribers |
| if cbs is None: |
| cbs = (self.tls_flow_check, self.dhcp_flow_check, self.igmp_flow_check) |
| chan_leave = True |
| for subscriber in subscriber_tx_rx_ports: |
| if 'IGMP' in services: |
| # if src_list: |
| # for i in range(len(src_list)): |
| # subscriber.start(src_ip = src_list[i]) |
| # else: |
| # subscriber.start() |
| subscriber.start() |
| sub_loop_count = sub_loop_count - 1 |
| pool_object = voltha_subscriber_pool(subscriber, cbs) |
| self.thread_pool.addTask(pool_object.pool_cb) |
| self.thread_pool.cleanUpThreads() |
| for subscriber in subscriber_tx_rx_ports: |
| if services and 'IGMP' in services: |
| # if src_list: |
| # for i in range(len(src_list)): |
| # subscriber.stop(src_ip = src_list[i]) |
| # else: |
| # subscriber.stop() |
| subscriber.stop() |
| if chan_leave is True: |
| subscriber.channel_leave(0) |
| subscribers_count = 0 |
| return self.test_status |
| |
| |
| def generate_port_list(self, subscribers, channels): |
| return self.port_list[:subscribers] |
| |
| @classmethod |
| def ovs_cleanup(cls): |
| ##For every test case, delete all the OVS groups |
| cmd = 'ovs-ofctl del-groups br-int -OOpenFlow11 >/dev/null 2>&1' |
| try: |
| cord_test_shell(cmd) |
| ##Since olt config is used for this test, we just fire a careless local cmd as well |
| os.system(cmd) |
| finally: |
| return |
| |
| def test_olt_enable_disable(self): |
| log_test.info('Enabling OLT type %s, MAC %s' %(self.OLT_TYPE, self.OLT_MAC)) |
| device_id, status = self.voltha.enable_device(self.OLT_TYPE, self.OLT_MAC) |
| assert_not_equal(device_id, None) |
| try: |
| assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| |
| def test_ponsim_enable_disable(self): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| try: |
| assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| |
| def test_subscriber_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue auth request packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber is authenticated successfully. |
| """ |
| ret = voltha_setup( |
| host = self.VOLTHA_HOST, |
| rest_port = self.VOLTHA_REST_PORT, |
| olt_type = 'ponsim_olt', |
| uplink_vlan_map = self.VOLTHA_UPLINK_VLAN_MAP, |
| uplink_vlan_start = self.VOLTHA_UPLINK_VLAN_START, |
| config_fake = self.VOLTHA_CONFIG_FAKE, |
| olt_app = self.olt_app_file) |
| assert_not_equal(ret, None) |
| voltha, device_id, switch_map = ret[0], ret[1], ret[2] |
| try: |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT) |
| assert_equal(auth_status, True) |
| finally: |
| if switch_map is not None: |
| if olt_configured is True: |
| self.remove_olt(switch_map) |
| voltha_teardown(voltha, device_id, switch_map, olt_app = self.olt_app_file) |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_failure(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls without cert auth packet is being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_with_no_cert_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "no_cert") |
| try: |
| assert_equal(auth_status, True) |
| assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.remove_olt(switch_map) |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| |
| reactor.callLater(0, tls_flow_check_with_no_cert_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_using_invalid_cert(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets and exchange invalid cert from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls with invalid cert auth packet is being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_with_invalid_cert_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert") |
| try: |
| assert_equal(auth_status, True) |
| assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.remove_olt(switch_map) |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_with_invalid_cert_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_multiple_invalid_authentication_attempts(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets and exchange invalid cert from CORD TESTER voltha test module acting as a subscriber for multiple times. |
| 4. Validate that eap tls with invalid cert auth packet is being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_with_no_cert_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert") |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert") |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "no_cert") |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT, cert_info = "invalid_cert") |
| try: |
| assert_equal(auth_status, True) |
| assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_with_no_cert_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_with_aaa_app_deactivation(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls without sending client hello, it's not being exchanged between client, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_deactivating_app(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,"app_deactivate",)) |
| thread2 = threading.Thread(target = self.deactivate_apps, args = (aaa_app,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart aaa app in onos during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_deactivating_app, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_radius_server(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls with restart of radius server and packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_restarting_radius(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,"restart_radius")) |
| thread2 = threading.Thread(target = cord_test_radius_restart) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart radius server during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_restarting_radius, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_with_disabled_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable olt which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_operating_olt_state(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "disable_olt_device",)) |
| thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id, False,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Disable the ponsim olt device during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_operating_olt_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_disabling_uni_port(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable uni port which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_operating_olt_state(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "uni_port_admin_down",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_toggle) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_operating_olt_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_carrying_out_multiple_times_toggling_of_uni_port(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable uni port which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| 10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow |
| |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| def tls_flow_check_with_disable_olt_device_scenario(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "uni_port_admin_down",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_down_up) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| # assert_equal(status, True) |
| assert_equal(auth_status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart olt which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_operating_olt_state(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_olt_device",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart the ponsim olt device during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_operating_olt_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_performing_multiple_times_restart_of_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart olt which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| 10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| def tls_flow_check_with_disable_olt_device_scenario(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_olt_device",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart the ponsim olt device during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| # assert_equal(status, True) |
| assert_equal(auth_status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_restarting_onu(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart onu which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| """ |
| df = defer.Deferred() |
| def tls_flow_check_operating_olt_state(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_onu_device",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (onu_device_id,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart the ponsim oon device during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_with_disable_olt_device_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_eap_tls_authentication_performing_multiple_times_restart_of_onu(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Restart onu which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| 10. Repeat steps from 3 to 9 for 10 times and finally verify tls flow |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| def tls_flow_check_operating_olt_state(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT, "restart_onu_device",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (onu_device_id,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Restart the ponsim oon device during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| auth_status = self.tls_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| # assert_equal(status, True) |
| assert_equal(auth_status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_operating_olt_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between two subscriber, onos and freeradius. |
| 5. Verify that two subscribers are authenticated successfully. |
| """ |
| |
| df = defer.Deferred() |
| def tls_flow_check_on_two_subscribers_same_olt_device(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_using_same_certificates(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that two valid certificates are being exchanged between two subscriber, onos and freeradius. |
| 5. Verify that two subscribers are not authenticated. |
| """ |
| |
| df = defer.Deferred() |
| def tls_flow_check_on_two_subscribers_same_olt_device(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "same_cert",)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_tls_packets_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius. |
| 5. Validate that eap tls valid auth packets are being exchanged between invalid client, onos and freeradius. |
| 6. Verify that valid subscriber authenticated successfully. |
| 7. Verify that invalid subscriber are not authenticated successfully. |
| """ |
| |
| df = defer.Deferred() |
| def tls_flow_check_on_two_subscribers_same_olt_device(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "no_cert",)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_initiating_invalid_cert_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT is detected and ONU ports(nni and 2 uni's) are being seen. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 4. Validate that eap tls valid auth packets are being exchanged between valid subscriber, onos and freeradius. |
| 5. Validate that eap tls invalid cert auth packets are being exchanged between invalid subscriber, onos and freeradius. |
| 6. Verify that valid subscriber authenticated successfully. |
| 7. Verify that invalid subscriber are not authenticated successfully. |
| """ |
| |
| df = defer.Deferred() |
| def tls_flow_check_on_two_subscribers_same_olt_device(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "invalid_cert",)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_eap_tls_authentication_with_one_uni_port_disabled(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Bring up two Residential subscribers from cord-tester and issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 5. Validate that eap tls packets are being exchanged between two subscriber, onos and freeradius. |
| 6. Verify that subscriber authenticated successfully. |
| 7. Disable one of the uni port which is seen in voltha and issue tls auth packets from subscriber. |
| 8. Validate that eap tls packets are not being exchanged between one subscriber, onos and freeradius. |
| 9. Verify that subscriber authentication is unsuccessful.. |
| 10. Verify that other subscriber authenticated successfully. |
| """ |
| |
| df = defer.Deferred() |
| def tls_flow_check_on_two_subscribers_same_olt_device(df): |
| aaa_app = ["org.opencord.aaa"] |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| devices_list = self.voltha.get_devices() |
| log_test.info('All available devices on voltha = %s'%devices_list['items']) |
| |
| onu_device_id = devices_list['items'][1]['id'] |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| devices_list = self.voltha.get_devices() |
| thread1 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.tls_flow_check, args = (self.INTF_2_RX_DEFAULT, "uni_port_admin_down",)) |
| thread1.start() |
| time.sleep(randint(1,2)) |
| log_test.info('Initiating tls auth packets from one more subscriber on same olt device which is deteced on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| # assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| reactor.callLater(0, tls_flow_check_on_two_subscribers_same_olt_device, df) |
| return df |
| |
| def test_3_subscribers_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (3 subscribers) |
| 4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber is authenticated successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 3 |
| num_channels = 1 |
| services = ('TLS') |
| cbs = (self.tls_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_5_subscribers_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (5 subscriber) |
| 4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber is authenticated successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 5 |
| num_channels = 1 |
| services = ('TLS') |
| cbs = (self.tls_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_9_subscribers_with_voltha_for_eap_tls_authentication(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Bring up freeradius server container using CORD TESTER and make sure that ONOS have connectivity to freeradius server. |
| 3. Issue auth request packets from CORD TESTER voltha test module acting as multipe subscribers (9 subscriber) |
| 4. Validate that eap tls valid auth packets are being exchanged between subscriber, onos and freeradius. |
| 5. Verify that subscriber is authenticated successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 9 |
| num_channels = 1 |
| services = ('TLS') |
| cbs = (self.tls_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.remove_olt(switch_map) |
| self.voltha.disable_device(device_id, delete = True) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_broadcast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac broadcast from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_broadcast") |
| try: |
| assert_equal(dhcp_status, True) |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_multicast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac multicast from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_multicast") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_request_with_invalid_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac zero from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "invalid_src_mac_junk") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_request_and_release(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp release from residential subscrber to dhcp server which is running as onos app. |
| 6 Verify that subscriber should not get ip from dhcp server, ping to gateway. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "request_release") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_starvation_positive_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times. |
| 6 Verify that subscriber should get ip from dhcp server. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "starvation_positive") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_starvation_negative_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber without of pool ip to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip from dhcp server. |
| 5. Repeat steps 3 and 4 for 10 times. |
| 6 Verify that subscriber should not get ip from dhcp server. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "starvation_negative") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_sending_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Repeat step 3 for 50 times. |
| 6 Verify that subscriber should get same ip which was received from 1st discover from dhcp server. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "multiple_discover") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_sending_multiple_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send DHCP request to dhcp server which is running as onos app. |
| 6. Repeat step 5 for 50 times. |
| 7. Verify that subscriber should get same ip which was received from 1st discover from dhcp server. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "multiple_requests") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_requesting_desired_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired ip address from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip which was requested in step 3 from dhcp server successfully. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "desired_ip_address") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_requesting_desired_out_of_pool_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired out of pool ip address from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber should not get ip which was requested in step 3 from dhcp server, and its offered only within dhcp pool of ip. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "desired_out_of_pool_ip_address") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_deactivating_dhcp_app_in_onos(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Deactivate dhcp server app in onos. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| df = defer.Deferred() |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.deactivate_apps, args = (dhcp_app,)) |
| log_test.info('Restart dhcp app in onos during client send discover to voltha') |
| thread2.start() |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_renew_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp renew packet to dhcp server which is running as onos app. |
| 6. Repeat step 4. |
| """ |
| |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "dhcp_renew") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_rebind_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Send dhcp rebind packet to dhcp server which is running as onos app. |
| 6. Repeat step 4. |
| """ |
| df = defer.Deferred() |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT, "dhcp_rebind") |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_toggling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| df = defer.Deferred() |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,)) |
| log_test.info('Disable the olt device in during client send discover to voltha') |
| thread2.start() |
| # time.sleep(randint(0,1)) |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_with_multiple_times_disabling_of_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Repeat steps from 3 to 7 for 10 times and finally verify dhcp flow |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,)) |
| log_test.info('Disable the olt device in during client send discover to voltha') |
| thread2.start() |
| # time.sleep(randint(0,1)) |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| assert_equal(self.success, True) |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_toggling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable olt devices which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| df = defer.Deferred() |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,)) |
| thread2.start() |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_toggling_olt_multiple_times(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable olt devices which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| df = defer.Deferred() |
| no_iterations = 10 |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (device_id,)) |
| thread2.start() |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| assert_equal(dhcp_status, True) |
| #assert_equal(status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_disabling_onu_port(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| df = defer.Deferred() |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_down_up) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_disabling_onu_port_multiple_times(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_down_up) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| try: |
| #assert_equal(status, True) |
| assert_equal(dhcp_status, True) |
| assert_equal(self.success, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_toggling_onu_port(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable onu port which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| df = defer.Deferred() |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_down_up) |
| log_test.info('Restart dhcp app in onos during client send discover to voltha') |
| thread2.start() |
| time.sleep(randint(0,1)) |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| assert_equal(dhcp_status, True) |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcp_toggling_onu_port_multiple_times(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from dhcp server, and ping to gateway. |
| 8. Enable onu port which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| df = defer.Deferred() |
| no_iterations = 10 |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| for i in range(no_iterations): |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT, "interrupting_dhcp_flows",)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_down_up) |
| log_test.info('Restart dhcp app in onos during client send discover to voltha') |
| thread2.start() |
| time.sleep(randint(0,1)) |
| thread1.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_status = self.dhcp_flow_check(self.INTF_RX_DEFAULT) |
| assert_equal(dhcp_status, True) |
| try: |
| assert_equal(self.success, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips from dhcp server successfully. |
| """ |
| |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| # if self.success is not True: |
| assert_equal(dhcp_flow_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times for both subscribers. |
| 6 Verify that subscribers should get same ips which are offered the first time from dhcp server. |
| """ |
| |
| |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"multiple_discover",)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"multiple_discover",)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| # if self.success is not True: |
| assert_equal(dhcp_flow_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_and_with_multiple_discover_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber. |
| 6 Verify that subscriber should get same ip which is offered the first time from dhcp server and other subscriber ping to gateway should not failed |
| """ |
| |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"multiple_discover",)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| # if self.success is not True: |
| assert_equal(dhcp_flow_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_discover_and_desired_ip_address_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from one residential subscriber to dhcp server which is running as onos app. |
| 3. Send dhcp request with desired ip from other residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from dhcp server successfully. |
| """ |
| |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_ip_address",)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| # if self.success is not True: |
| assert_equal(dhcp_flow_status, True) |
| #assert_equal(status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_discover_within_and_without_dhcp_pool_ip_addresses(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to dhcp server which is running as onos app. |
| 3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from dhcp server successfully. |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"desired_ip_address",)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_out_of_pool_ip_address",)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_disabling_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed. |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,"desired_ip_address",)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,"desired_out_of_pool_ip_address",)) |
| thread1.start() |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_toggling_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should not failed. |
| 8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber. |
| 9. Repeat step 3 and 4 for one subscriber where uni port is up now. |
| 10. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed. |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread3 = threading.Thread(target = self.voltha_uni_port_down_up, args = (self.INTF_2_RX_DEFAULT,)) |
| thread1.start() |
| thread2.start() |
| thread3.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| thread3.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_disabling_olt(self): |
| """ |
| Test Method: uni_port |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread3 = threading.Thread(target = self.voltha.disable_device, args = (device_id,False,)) |
| |
| thread1.start() |
| thread2.start() |
| thread3.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| thread3.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_toggling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| 8. Enable the olt device which is detected in voltha. |
| 9. Verify that subscriber should get ip from dhcp server and other subscriber ping to gateway should not failed. |
| |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread3 = threading.Thread(target = self.voltha.restart_device, args = (device_id,)) |
| thread1.start() |
| thread2.start() |
| thread3.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| thread3.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_dhcp_with_paused_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to dhcp server which is running as onos app. |
| 4. Verify that subscribers had got ip from dhcp server successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Pause the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from dhcp server and other subscriber ping to gateway should failed. |
| """ |
| df = defer.Deferred() |
| self.success = True |
| dhcp_app = 'org.onosproject.dhcp' |
| def dhcp_flow_check_scenario(df): |
| log_test.info('Enabling ponsim_olt') |
| ponsim_address = '{}:50060'.format(self.VOLTHA_HOST) |
| device_id, status = self.voltha.enable_device('ponsim_olt', address = ponsim_address) |
| assert_not_equal(device_id, None) |
| voltha = VolthaCtrl(**self.voltha_attrs) |
| time.sleep(10) |
| switch_map = None |
| olt_configured = False |
| switch_map = voltha.config(fake = self.VOLTHA_CONFIG_FAKE) |
| log_test.info('Installing OLT app') |
| OnosCtrl.install_app(self.olt_app_file) |
| time.sleep(5) |
| log_test.info('Adding subscribers through OLT app') |
| self.config_olt(switch_map) |
| olt_configured = True |
| time.sleep(5) |
| thread1 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_RX_DEFAULT,)) |
| thread2 = threading.Thread(target = self.dhcp_flow_check, args = (self.INTF_2_RX_DEFAULT,)) |
| thread3 = threading.Thread(target = self.voltha.pause_device, args = (device_id,)) |
| thread1.start() |
| thread2.start() |
| thread3.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| thread3.join() |
| dhcp_flow_status = self.success |
| try: |
| assert_equal(dhcp_flow_status, True) |
| time.sleep(10) |
| finally: |
| self.voltha.disable_device(device_id, delete = True) |
| self.remove_olt(switch_map) |
| df.callback(0) |
| |
| reactor.callLater(0, dhcp_flow_check_scenario, df) |
| return df |
| |
| def test_3_subscribers_with_voltha_for_dhcp_discover_requests(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (3 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 3 |
| num_channels = 1 |
| services = ('DHCP') |
| cbs = (self.dhcp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_5_subscribers_with_voltha_for_dhcp_discover_requests(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (5 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 5 |
| num_channels = 1 |
| services = ('DHCP') |
| cbs = (self.dhcp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_9_subscribers_with_voltha_for_dhcp_discover_requests(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (9 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 9 subscribers browsing 1 channels each""" |
| num_subscribers = 9 |
| num_channels = 1 |
| services = ('DHCP') |
| cbs = (self.dhcp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_3_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (3 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 3 |
| num_channels = 1 |
| services = ('TLS','DHCP') |
| cbs = (self.tls_flow_check, self.dhcp_flow_check, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_5_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (5 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 5 |
| num_channels = 1 |
| services = ('TLS','DHCP') |
| cbs = (self.tls_flow_check, self.dhcp_flow_check, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_9_subscribers_with_voltha_for_tls_auth_and_dhcp_discover_flows(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as multiple subscribers (9 subscribers) |
| 3. Send dhcp request from residential subscrber to dhcp server which is running as onos app. |
| 4. Verify that subscriber get ip from dhcp server successfully. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 9 |
| num_channels = 1 |
| services = ('TLS','DHCP') |
| cbs = (self.tls_flow_check, self.dhcp_flow_check, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcprelay_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server successfully. |
| """ |
| self.dhcprelay_setUpClass() |
| # if not port_list: |
| port_list = self.generate_port_list(1, 0) |
| iface = self.port_map['ports'][port_list[1][1]] |
| mac = self.get_mac(iface) |
| self.host_load(iface) |
| ##we use the defaults for this test that serves as an example for others |
| ##You don't need to restart dhcpd server if retaining default config |
| config = self.default_config |
| options = self.default_options |
| subnet = self.default_subnet_config |
| dhcpd_interface_list = self.relay_interfaces |
| self.dhcpd_start(intf_list = dhcpd_interface_list, |
| config = config, |
| options = options, |
| subnet = subnet) |
| self.dhcp = DHCPTest(seed_ip = '10.10.10.1', iface = iface) |
| self.send_recv(mac=mac) |
| self.dhcprelay_tearDwonClass() |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcprelay_request_with_invalid_broadcast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac broadcast from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_subscriber_with_voltha_for_dhcprelay_request_with_invalid_multicast_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac multicast from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_request_with_invalid_source_mac(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with invalid source mac zero from residential subscrber to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_request_and_release(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscrber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server successfully. |
| 5. Send dhcp release from residential subscrber to external dhcp server. |
| 6 Verify that subscriber should not get ip from external dhcp server, ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_starvation(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times. |
| 6 Verify that subscriber should get ip from external dhcp server.. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_starvation_negative_scenario(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber without of pool ip to external dhcp server. |
| 4. Verify that subscriber should not get ip from external dhcp server.. |
| 5. Repeat steps 3 and 4 for 10 times. |
| 6 Verify that subscriber should not get ip from external dhcp server.. |
| """ |
| def test_subscriber_with_voltha_for_dhcprelay_sending_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Repeat step 3 for 50 times. |
| 6 Verify that subscriber should get same ip which was received from 1st discover from external dhcp server.. |
| """ |
| def test_subscriber_with_voltha_for_dhcprelay_sending_multiple_request(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send DHCP request to external dhcp server. |
| 6. Repeat step 5 for 50 times. |
| 7. Verify that subscriber should get same ip which was received from 1st discover from external dhcp server.. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_requesting_desired_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired ip address from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip which was requested in step 3 from external dhcp server. successfully. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_requesting_desired_out_of_pool_ip_address(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired out of pool ip address from residential subscriber to external dhcp server. |
| 4. Verify that subscriber should not get ip which was requested in step 3 from external dhcp server., and its offered only within dhcp pool of ip. |
| """ |
| |
| def test_subscriber_with_voltha_deactivating_dhcprelay_app_in_onos(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Deactivate dhcp server app in onos. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_renew_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send dhcp renew packet to external dhcp server. |
| 6. Repeat step 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_rebind_time(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Send dhcp rebind packet to external dhcp server. |
| 6. Repeat step 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_disabling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_toggling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable olt devices which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| 8. Enable olt devices which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_disable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| """ |
| |
| def test_subscriber_with_voltha_for_dhcprelay_disable_enable_onu_port_in_voltha(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from residential subscriber to external dhcp server. |
| 4. Verify that subscriber get ip from external dhcp server. successfully. |
| 5. Disable onu port which is being detected in voltha CLI. |
| 6. Repeat step 3. |
| 7. Verify that subscriber should not get ip from external dhcp server., and ping to gateway. |
| 8. Enable onu port which is being detected in voltha CLI. |
| 9. Repeat steps 3 and 4. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got different ips from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_multiple_discover(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times for both subscribers. |
| 6 Verify that subscribers should get same ips which are offered the first time from external dhcp server.. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_multiple_discover_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Repeat step 3 and 4 for 10 times for only one subscriber and ping to gateway from other subscriber. |
| 6 Verify that subscriber should get same ip which is offered the first time from external dhcp server. and other subscriber ping to gateway should not failed |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_discover_desired_ip_address_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from one residential subscriber to external dhcp server. |
| 3. Send dhcp request with desired ip from other residential subscriber to external dhcp server. |
| 4. Verify that subscribers had got different ips (one subscriber desired ip and other subscriber random ip) from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_discover_for_in_range_and_out_of_range_from_dhcp_pool_ip_addresses(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request with desired wihtin dhcp pool ip from one residential subscriber to external dhcp server. |
| 3. Send dhcp request with desired without in dhcp pool ip from other residential subscriber to external dhcp server. |
| 4. Verify that subscribers had got different ips (both subscriber got random ips within dhcp pool) from external dhcp server. successfully. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_disabling_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_toggling_onu_port_for_one_subscriber(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Disable onu port on which access one subscriber and ping to gateway from other subscriber. |
| 6. Repeat step 3 and 4 for one subscriber where uni port is down. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| 8. Enable onu port on which was disable at step 5 and ping to gateway from other subscriber. |
| 9. Repeat step 3 and 4 for one subscriber where uni port is up now. |
| 10. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_disabling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_toggling_olt(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Disable the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| 8. Enable the olt device which is detected in voltha. |
| 9. Verify that subscriber should get ip from external dhcp server. and other subscriber ping to gateway should not failed. |
| """ |
| |
| def test_two_subscribers_with_voltha_for_dhcprelay_with_paused_olt_detected(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha and external dhcp server are up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Send dhcp request from two residential subscribers to external dhcp server. |
| 4. Verify that subscribers had got ip from external dhcp server. successfully. |
| 5. Start pinging continuously from one subscriber and repeat steps 3 and 4 for other subscriber. |
| 6. Pause the olt device which is detected in voltha. |
| 7. Verify that subscriber should not get ip from external dhcp server. and other subscriber ping to gateway should failed. |
| """ |
| |
| def test_subscriber_with_voltha_for_igmp_join_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA. |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| """ |
| |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_leave_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA. |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU. |
| 6. Verify that multicast data packets are being recieved on join received uni port on ONU to cord-tester. |
| 7. Send igmp leave for a multicast group address multi-group-addressA. |
| 8. Verify that multicast data packets are not being recieved on leave sent uni port on ONU to cord-tester. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_leave_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_leave_and_again_join_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA. |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port on ONU. |
| 6. Verify that multicast data packets are being recieved on join received uni port on ONU to cord-tester. |
| 7. Send igmp leave for a multicast group address multi-group-addressA. |
| 8. Verify that multicast data packets are not being recieved on leave sent uni port on ONU to cord-tester. |
| 9. Repeat steps 4 to 6. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_leave_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_5_groups_joins_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for multicast group addresses multi-group-addressA,multi-group-addressB |
| 5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU. |
| 6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 1 |
| num_channels = 5 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_5_groups_joins_and_leave_for_one_group_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for multicast group addresses multi-group-addressA,multi-group-addressB |
| 5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU. |
| 6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send igmp leave for a multicast group address multi-group-addressA. |
| 8. Verify that multicast data packets of group(multi-group-addressA) are not being recieved on leave sent uni port on ONU to cord-tester. |
| 9. Verify that multicast data packets of group (multi-group-addressB) are being recieved on join sent uni port on ONU to cord-tester. |
| """ |
| """Test subscriber join next for channel surfing with 3 subscribers browsing 3 channels each""" |
| num_subscribers = 1 |
| num_channels = 5 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_join_different_group_src_list_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU. |
| 8. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_change_to_exclude_mcast_group_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send igmp joins for a multicast group address multi-group-addressA with exclude source list src_listA |
| 8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 9. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| |
| num_subscribers = 1 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_exclude, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_change_to_include_back_from_exclude_mcast_group_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are not being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send igmp joins for a multicast group address multi-group-addressA with allow source list src_listA |
| 8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 9. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| num_subscribers = 1 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_exclude_again_include_back, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_change_to_block_src_list_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send igmp joins for a multicast group address multi-group-addressA with block source list src_listA |
| 8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 9. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_block, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_allow_new_src_list_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send igmp joins for a multicast group address multi-group-addressA with allow new source list src_listB |
| 8. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU. |
| 9. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_block_again_allow_back, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['2.3.4.5','3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscriber_with_voltha_for_igmp_group_include_empty_src_list_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are not being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU. |
| 8. Verify that multicast data packets are not being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_group_include_source_empty_list, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['0'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_subscribers_with_voltha_for_igmp_group_exclude_empty_src_list_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA with source exclude list src_listA |
| 5. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listA on ONU. |
| 6. Verify that multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| 7. Send multicast data traffic for a group (multi-group-addressA) from other uni port with source ip as src_listB on ONU. |
| 8. Verify that multicast data packets are being recieved on join sent uni port on ONU from other source list to cord-tester. |
| """ |
| |
| num_subscribers = 1 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_group_exclude_source_empty_list, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['0'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_two_subscribers_with_voltha_for_igmp_join_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressB from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| |
| num_subscribers = 2 |
| num_channels = 1 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['1.2.3.4'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_two_subscribers_with_voltha_for_igmp_join_leave_for_one_subscriber_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Send igmp leave for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_exclude, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['1.2.3.4','2.3.4.5'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_two_subscribers_with_voltha_for_igmp_leave_join_for_one_subscriber_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp leave for a multicast group address multi-group-addressB from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast group adress (multi-group-addressA) data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast group adress (multi-group-addressB) data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Send igmp join for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 10. Verify that multicast of group (multi-group-addressA) data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast of group (multi-group-addressA) data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Verify that multicast of group (multi-group-addressB) data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_join_change_to_exclude_again_include_back, None, None) |
| self.voltha_subscribers(services, cbs = cbs, src_list = ['1.2.3.4', '3.4.5.6'], |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_with_uni_port_down_for_one_subscriber_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable uni_2 port which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| #rx_port = self.port_map['ports'][port_list[i][1]] |
| df = defer.Deferred() |
| def igmp_flow_check_operating_onu_admin_state(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_during_olt_onu_operational_issues, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_toggle, args = (self.port_map['ports'][port_list[1][1]],)) |
| thread1.start() |
| time.sleep(randint(40,50)) |
| log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, False) |
| log_test.info('Igmp flow check expected to fail, hence ignore the test_status of igmp flow check') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_onu_admin_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_toggling_uni_port_for_one_subscriber_and_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable uni_2 port which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Enable uni_2 port which we disable at step 9. |
| 13. Repeat step 5,6 and 8. |
| """ |
| df = defer.Deferred() |
| def igmp_flow_check_operating_onu_admin_state(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread2 = threading.Thread(target = self.voltha_uni_port_toggle, args = (self.port_map['ports'][port_list[1][1]],)) |
| thread1.start() |
| time.sleep(randint(50,60)) |
| log_test.info('Admin state of uni port is down and up after delay of 30 sec during tls auth flow check on voltha') |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| log_test.info('Igmp flow check expected to fail during UNI port down only, after UNI port is up it should be successful') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_onu_admin_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_disabling_olt_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable olt device which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| df = defer.Deferred() |
| def igmp_flow_check_operating_olt_admin_disble(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_during_olt_onu_operational_issues, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(50,60)) |
| thread2 = threading.Thread(target = self.voltha.disable_device, args = (self.olt_device_id, False,)) |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, False) |
| log_test.info('Igmp flow check expected to fail during olt device is disabled, so ignored test_status of this test') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_olt_admin_disble, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_pausing_olt_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Pause olt device which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| """ |
| df = defer.Deferred() |
| def igmp_flow_check_operating_olt_admin_pause(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check_during_olt_onu_operational_issues, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(50,60)) |
| thread2 = threading.Thread(target = self.voltha.pause_device, args = (self.olt_device_id,)) |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, False) |
| log_test.info('Igmp flow check expected to fail during olt device is paused, so ignored test_status of this test') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_olt_admin_pause, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_toggling_olt_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable olt device which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Enable olt device which is disable at step 9. |
| 13. Repeat steps 4,5, 7 and 8. |
| """ |
| df = defer.Deferred() |
| def igmp_flow_check_operating_olt_admin_restart(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(50,60)) |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (self.olt_device_id,)) |
| thread2.start() |
| time.sleep(10) |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| log_test.info('Igmp flow check expected to fail during olt device restart, After OLT device is up, it should be successful') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_olt_admin_restart, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_multiple_times_disabling_olt_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable olt device which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Repeat steps 4 to 11 steps multiple times (example 20 times) |
| """ |
| df = defer.Deferred() |
| no_iterations = 20 |
| def igmp_flow_check_operating_olt_admin_disble(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(30,40)) |
| for i in range(no_iterations): |
| thread2 = threading.Thread(target = self.voltha.disable_device, args = (self.olt_device_id, False,)) |
| thread2.start() |
| time.sleep(8) |
| thread2.join() |
| thread1.join() |
| thread1.isAlive() |
| thread2.join() |
| try: |
| assert_equal(self.success, False) |
| log_test.info('Igmp flow check expected to fail during olt device is disabled, so ignored test_status of this test') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_olt_admin_disble, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT + 200) |
| def test_two_subscribers_with_voltha_for_igmp_multiple_times_toggling_uni_port_for_one_subscriber_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable uni_2 port which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Enable uni_2 port which we disable at step 9. |
| 13. Repeat step 5,6 and 8. |
| 14. Repeat steps 4 to 13 steps multiple times (example 5 times) |
| """ |
| df = defer.Deferred() |
| no_iterations = 5 |
| def igmp_flow_check_operating_onu_admin_state(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(40,60)) |
| for i in range(no_iterations): |
| thread2 = threading.Thread(target = self.voltha_uni_port_toggle, args = (self.port_map['ports'][port_list[1][1]],)) |
| log_test.info('Admin state of uni port is down and up after delay of 30 sec during igmp flow check on voltha') |
| thread2.start() |
| time.sleep(1) |
| thread2.join() |
| thread1.isAlive() |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| log_test.info('Igmp flow check expected to fail during UNI port down only, after UNI port is up it should be successful') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_onu_admin_state, df) |
| return df |
| |
| @deferred(TESTCASE_TIMEOUT) |
| def test_two_subscribers_with_voltha_for_igmp_multiple_times_toggling_olt_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue tls auth packets from CORD TESTER voltha test module acting as a subscriber.. |
| 3. Issue dhcp client packets to get IP address from dhcp server for a subscriber and check connectivity. |
| 4. Send igmp joins for a multicast group address multi-group-addressA from one subscribers (uni_1 port) |
| 5. Send igmp joins for a multicast group address multi-group-addressA from other subscribers ( uni_2 port) |
| 6. Send multicast data traffic for a group (multi-group-addressA) from other uni_3 port on ONU. |
| 7. Verify that multicast data packets are being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 8. Verify that multicast data packets are being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 9. Disable olt device which is being shown on voltha CLI. |
| 10. Verify that multicast data packets are not being recieved on join sent uni (uni_1) port on ONU to cord-tester. |
| 11. Verify that multicast data packets are not being recieved on join sent uni (uni_2) port on ONU to cord-tester. |
| 12. Enable olt device which is disable at step 9. |
| 13. Repeat steps 4,5, 7 and 8. |
| 14. Repeat steps 4 to 13 steps multiple times (example 10 times) |
| """ |
| df = defer.Deferred() |
| no_iterations = 10 |
| def igmp_flow_check_operating_olt_admin_restart(df): |
| num_subscribers = 2 |
| num_channels = 2 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| port_list = self.generate_port_list(num_subscribers, num_channels) |
| |
| thread1 = threading.Thread(target = self.voltha_subscribers, args = (services, cbs, 2, 2, ['1.2.3.4', '3.4.5.6'],)) |
| thread1.start() |
| time.sleep(randint(50,60)) |
| for i in range(no_iterations): |
| thread2 = threading.Thread(target = self.voltha.restart_device, args = (self.olt_device_id,)) |
| thread2.start() |
| time.sleep(10) |
| thread2.join() |
| thread1.join() |
| thread2.join() |
| try: |
| assert_equal(self.success, True) |
| log_test.info('Igmp flow check expected to fail during olt device restart, after OLT device is up, it should be successful') |
| time.sleep(10) |
| finally: |
| pass |
| df.callback(0) |
| reactor.callLater(0, igmp_flow_check_operating_olt_admin_restart, df) |
| return df |
| |
| def test_5_subscriber_with_voltha_for_igmp_with_10_group_joins_verifying_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue multiple tls auth packets from CORD TESTER voltha test module acting as subscribers.. |
| 3. Issue multiple dhcp client packets to get IP address from dhcp server for as subscribers and check connectivity. |
| 4. Send multiple igmp joins for 10 multicast group addresses multi-group-addressA,multi-group-addressB etc |
| 5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU. |
| 6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| """ |
| |
| num_subscribers = 5 |
| num_channels = 10 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |
| |
| def test_9_subscriber_with_voltha_for_igmp_with_10_group_joins_and_verify_traffic(self): |
| """ |
| Test Method: |
| 0. Make sure that voltha is up and running on CORD-POD setup. |
| 1. OLT and ONU is detected and validated. |
| 2. Issue multiple tls auth packets from CORD TESTER voltha test module acting as subscribers.. |
| 3. Issue multiple dhcp client packets to get IP address from dhcp server for subscribers and check connectivity. |
| 4. Send multiple igmp joins for 10 multicast group addresses multi-group-addressA,multi-group-addressB etc |
| 5. Send multicast data traffic for two groups (multi-group-addressA and multi-group-addressB) from other uni port on ONU. |
| 6. Verify that 2 groups multicast data packets are being recieved on join sent uni port on ONU to cord-tester. |
| """ |
| num_subscribers = 9 |
| num_channels = 10 |
| services = ('IGMP') |
| cbs = (self.igmp_flow_check, None, None) |
| self.voltha_subscribers(services, cbs = cbs, |
| num_subscribers = num_subscribers, |
| num_channels = num_channels) |