Chetan Gaonker | 7f4bf74 | 2016-05-04 15:56:08 -0700 | [diff] [blame] | 1 | # -*- text -*- |
| 2 | # |
| 3 | # $Id: 9a690b77c2eaea1086d9748012c380283714f452 $ |
| 4 | |
| 5 | # |
| 6 | # Sample configuration for an EAP module that occurs *inside* |
| 7 | # of a tunneled method. It is used to limit the EAP types that |
| 8 | # can occur inside of the inner tunnel. |
| 9 | # |
| 10 | # See also raddb/sites-available/inner-tunnel |
| 11 | # |
| 12 | # See raddb/mods-available/eap for full documentation on the meaning of these |
| 13 | # configuration entries. |
| 14 | # |
| 15 | eap inner-eap { |
| 16 | # This is the best choice for PEAP. |
| 17 | default_eap_type = mschapv2 |
| 18 | |
| 19 | timer_expire = 60 |
| 20 | |
| 21 | # This should be the same as the outer eap "max sessions" |
| 22 | max_sessions = 2048 |
| 23 | |
| 24 | # Supported EAP-types |
| 25 | md5 { |
| 26 | } |
| 27 | |
| 28 | gtc { |
| 29 | # The default challenge, which many clients |
| 30 | # ignore.. |
| 31 | #challenge = "Password: " |
| 32 | |
| 33 | auth_type = PAP |
| 34 | } |
| 35 | |
| 36 | mschapv2 { |
| 37 | # See eap for documentation |
| 38 | # send_error = no |
| 39 | } |
| 40 | |
| 41 | # No TTLS or PEAP configuration should be listed here. |
| 42 | |
| 43 | ## EAP-TLS |
| 44 | # |
| 45 | # You SHOULD use different certificates than are used |
| 46 | # for the outer EAP configuration! |
| 47 | # |
| 48 | # Support for PEAP/TLS and RFC 5176 TLS/TLS is experimental. |
| 49 | # It might work, or it might not. |
| 50 | # |
| 51 | tls { |
| 52 | private_key_password = whatever |
| 53 | private_key_file = ${certdir}/inner-server.pem |
| 54 | |
| 55 | # If Private key & Certificate are located in |
| 56 | # the same file, then private_key_file & |
| 57 | # certificate_file must contain the same file |
| 58 | # name. |
| 59 | # |
| 60 | # If ca_file (below) is not used, then the |
| 61 | # certificate_file below MUST include not |
| 62 | # only the server certificate, but ALSO all |
| 63 | # of the CA certificates used to sign the |
| 64 | # server certificate. |
| 65 | certificate_file = ${certdir}/inner-server.pem |
| 66 | |
| 67 | # You may want different CAs for inner and outer |
| 68 | # certificates. If so, edit this file. |
| 69 | ca_file = ${cadir}/ca.pem |
| 70 | |
| 71 | cipher_list = "DEFAULT" |
| 72 | |
| 73 | # You may want to set a very small fragment size. |
| 74 | # The TLS data here needs to go inside of the |
| 75 | # outer EAP-TLS protocol. |
| 76 | # |
| 77 | # Try values and see if they work... |
| 78 | # fragment_size = 1024 |
| 79 | |
| 80 | # Other needful things |
| 81 | dh_file = ${certdir}/dh |
| 82 | random_file = ${certdir}/random |
| 83 | |
| 84 | # CRL and OCSP things go here. See the main "eap" |
| 85 | # file for details. |
| 86 | # check_crl = yes |
| 87 | # ca_path = /path/to/directory/with/ca_certs/and/crls/ |
| 88 | |
| 89 | # |
| 90 | # The session resumption / fast re-authentication |
| 91 | # cache CANNOT be used for inner sessions. |
| 92 | # |
| 93 | } |
| 94 | } |