src/test/setup/radius-config/freeradius/mods-config/attr_filter/post-proxy

#
#	Configuration file for the rlm_attr_filter module.
#	Please see rlm_attr_filter(5) manpage for more information.
#
#	$Id: 21a3af9c7ad97563b372d445bee2b37d564448fe $
#
#	This file contains security and configuration information
#	for each realm. The first field is the realm name and
#	can be up to 253 characters in length. This is followed (on
#	the next line) with the list of filter rules to be used to
#	decide what attributes and/or values we allow proxy servers
#	to pass to the NAS for this realm.
#
#	When a proxy-reply packet is received from a home server,
#	these attributes and values are tested. Only the first match
#	is used unless the "Fall-Through" variable is set to "Yes".
#	In that case the rules defined in the DEFAULT case are
#	processed as well.
#
#	A special realm named "DEFAULT" matches on all realm names.
#	You can have only one DEFAULT entry. All entries are processed
#	in the order they appear in this file. The first entry that
#	matches the login-request will stop processing unless you use
#	the Fall-Through variable.
#
#	Indented (with the tab character) lines following the first
#	line indicate the filter rules.
#
#	You can include another `attrs' file with `$INCLUDE attrs.other'
#

#
# This is a complete entry for realm "fisp". Note that there is no
# Fall-Through entry so that no DEFAULT entry will be used, and the
# server will NOT allow any other a/v pairs other than the ones
# listed here.
#
# These rules allow:
#     o  Only Framed-User Service-Types ( no telnet, rlogin, tcp-clear )
#     o  PPP sessions ( no SLIP, CSLIP, etc. )
#     o  dynamic ip assignment ( can't assign a static ip )
#     o  an idle timeout value set to 600 seconds (10 min) or less
#     o  a max session time set to 28800 seconds (8 hours) or less
#
#fisp
#	Service-Type == Framed-User,
#	Framed-Protocol == PPP,
#	Framed-IP-Address == 255.255.255.254,
#	Idle-Timeout <= 600,
#	Session-Timeout <= 28800

#
# This is a complete entry for realm "tisp". Note that there is no
# Fall-Through entry so that no DEFAULT entry will be used, and the
# server will NOT allow any other a/v pairs other than the ones
# listed here.
#
# These rules allow:
#       o Only Login-User Service-Type ( no framed/ppp sessions )
#       o Telnet sessions only ( no rlogin, tcp-clear )
#       o Login hosts of either 192.0.2.1 or 192.0.2.2
#
#tisp
#	Service-Type == Login-User,
#	Login-Service == Telnet,
#	Login-TCP-Port == 23,
#	Login-IP-Host == 192.0.2.1,
#	Login-IP-Host == 192.0.2.2

#
# The following example can be used for a home server which is only
# allowed to supply a Reply-Message, a Session-Timeout attribute of
# maximum 86400, a Idle-Timeout attribute of maximum 600 and a
# Acct-Interim-Interval attribute between 300 and 3600.
# All other attributes sent back will be filtered out.
#
#strictrealm
#	Reply-Message =* ANY,
#	Session-Timeout <= 86400,
#	Idle-Timeout <= 600,
#	Acct-Interim-Interval >= 300,
#	Acct-Interim-Interval <= 3600

#
# This is a complete entry for realm "spamrealm". Fall-Through is used,
# so that the DEFAULT filter rules are used in addition to these.
#
# These rules allow:
#       o Force the application of Filter-ID attribute to be returned
#         in the proxy reply, whether the proxy sent it or not.
#       o The standard DEFAULT rules as defined below
#
#spamrealm
#	Framed-Filter-Id := "nosmtp.in",
#	Fall-Through = Yes

#
# The rest of this file contains the DEFAULT entry.
# DEFAULT matches with all realm names. (except if the realm previously
# matched an entry with no Fall-Through)
#

DEFAULT
	Service-Type == Framed-User,
	Service-Type == Login-User,
	Login-Service == Telnet,
	Login-Service == Rlogin,
	Login-Service == TCP-Clear,
	Login-TCP-Port <= 65536,
	Framed-IP-Address == 255.255.255.254,
	Framed-IP-Netmask == 255.255.255.255,
	Framed-Protocol == PPP,
	Framed-Protocol == SLIP,
	Framed-Compression == Van-Jacobson-TCP-IP,
	Framed-MTU >= 576,
	Framed-Filter-ID =* ANY,
	Reply-Message =* ANY,
	Proxy-State =* ANY,
	EAP-Message =* ANY,
	Message-Authenticator =* ANY,
	MS-MPPE-Recv-Key =* ANY,
	MS-MPPE-Send-Key =* ANY,
	MS-CHAP-MPPE-Keys =* ANY,
	State =* ANY,
	Session-Timeout <= 28800,
	Idle-Timeout <= 600,
	Calling-Station-Id =* ANY,
	Operator-Name =* ANY,
	Port-Limit <= 2