Jenkinsfile/verify-api-tests-JenkinsFile

// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.


PROFILE="null"
CORE_CONTAINER="null"

node ('ubuntu16.04-basebuild-4c-8g') {
    stage('Config') {
        sh """
        rm -rf ~/cord/
        rm -rf ~/cord_profile
        rm -rf /opt/cord
        rm -rf /opt/cord_profile
        rm -rf /opt/credentials
        rm -rf /opt/images
        rm -rf /opt/pki
        rm -rf ~/.repo/
        mkdir ~/cord && cd ~/cord/
        repo init -u https://gerrit.opencord.org/manifest -b $GERRIT_BRANCH
        repo sync
        repo download $GERRIT_PROJECT $GERRIT_CHANGE_NUMBER/$GERRIT_PATCHSET_NUMBER
        """
    }
    try {
        stage('Build') {
            sh """
            if  [ '$GERRIT_PROJECT' = 'platform-install' ] || [ '$GERRIT_PROJECT' = 'xos' ] || [ '$GERRIT_PROJECT' = 'cord' ] || [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] ||  [ '$GERRIT_PROJECT' = 'olt-service' ] ||  [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
                PROFILE=rcord-local.yml
            fi
            if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
                PROFILE=ecord-local.yml
            fi
            if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
                PROFILE=mcord-ng40-local.yml
            fi
            if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
                PROFILE=mcord-cavium-local.yml
            fi
            cd ~/cord/build/
            make PODCONFIG=\$PROFILE config
            make -j4 build
            """
        }
        stage('Setup') {
            try {
                sh """
            if [ '$GERRIT_PROJECT' = 'platform-install' ] || [ '$GERRIT_PROJECT' = 'xos' ] || [ '$GERRIT_PROJECT' = 'cord' ] || [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] ||  [ '$GERRIT_PROJECT' = 'olt-service' ] ||  [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
                CORE_CONTAINER=rcord_xos_core_1
            fi
            if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
                CORE_CONTAINER=ecord_xos_core_1
            fi
            if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
                CORE_CONTAINER=mcordng40_xos_core_1
            fi
            if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
                CORE_CONTAINER=mcordcavium_xos_core_1
            fi
            docker cp ~/cord/test/cord-tester/src/test/cord-api/Tests/targets/xosapitests.xtarget \$CORE_CONTAINER:/opt/xos/lib/xos-genx/xosgenx/targets/xosapitests.xtarget
            docker exec -i \$CORE_CONTAINER /bin/bash -c "xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/core/models/core.xproto" > ~/cord/test/cord-tester/src/test/cord-api/Tests/XOSCoreAPITests.robot
            SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
            export testname=_service_api.robot
            for i in \$SERVICES; do bash -c "docker exec -i \$CORE_CONTAINER /bin/bash -c 'xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/dynamic_services/\$i/\$i.xproto'" > ~/cord/test/cord-tester/src/test/cord-api/Tests/\$i\$testname; done
            """
            }
            catch(error) { currentBuild.result = 'FAILURE' }
        }
        stage('Test') {
            try {
                sh """
                if [ '$GERRIT_PROJECT' = 'platform-install' ] || [ '$GERRIT_PROJECT' = 'xos' ] || [ '$GERRIT_PROJECT' = 'cord' ] || [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] ||  [ '$GERRIT_PROJECT' = 'olt-service' ] ||  [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
                    CORE_CONTAINER=rcord_xos_core_1
                fi
                if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
                    CORE_CONTAINER=ecord_xos_core_1
                fi
                if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
                    CORE_CONTAINER=mcordng40_xos_core_1
                fi
                if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
                    CORE_CONTAINER=mcordcavium_xos_core_1
                fi
                    export testname=_service_api.robot
                    SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
                    echo \$SERVICES
                    export SERVER_IP=localhost
                    export SERVER_PORT=9101
                    export XOS_USER=xosadmin@opencord.org
                    export XOS_PASSWD=\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)
                    cd ~/cord/test/cord-tester/src/test/cord-api/Properties/
                    sed -i \"s/^\\(XOS_PASSWD = \\).*/\\1\'\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)\'/\" RestApiProperties.py
                    cd ~/cord/test/cord-tester/src/test/cord-api/Tests
                    pybot -d Log -T -e TenantWithContainer -e Port -e ControllerImages -e ControllerNetwork -e ControllerSlice -e ControllerUser XOSCoreAPITests.robot  || true
                    for i in \$SERVICES; do bash -c "pybot -d Log -T -e AddressManagerServiceInstance -v xos_service:\$i \$i\$testname"; done || true
                    """
                }
            catch(error) { currentBuild.result = 'FAILURE' }
        }
        stage('Publish') {
            try {
                sh """
                if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs
                cp -r ~/cord/test/cord-tester/src/test/cord-api/Tests/Log/*ml ./RobotLogs
                """
                step([$class: 'RobotPublisher',
                    disableArchiveOutput: false,
                    logFileName: 'RobotLogs/log*.html',
                    otherFiles: '',
                    outputFileName: 'RobotLogs/output*.xml',
                    outputPath: '.',
                    passThreshold: 100,
                    reportFileName: 'RobotLogs/report*.html',
                    unstableThreshold: 0]);
            }catch(error) {}
        }
    }
    finally {
        step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "kailash@opennetworking.org", sendToIndividuals: false])
    }
}