Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 1 | import os |
| 2 | from nose.tools import * |
| 3 | from scapy.all import * |
| 4 | import requests |
| 5 | from twisted.internet import defer |
| 6 | from nose.twistedtools import reactor, deferred |
| 7 | from CordTestUtils import * |
| 8 | from CordTestUtils import log_test as log |
| 9 | from OltConfig import OltConfig |
| 10 | from onosclidriver import OnosCliDriver |
| 11 | from SSHTestAgent import SSHTestAgent |
| 12 | from Channels import Channels, IgmpChannel |
| 13 | from IGMP import * |
| 14 | import time, monotonic |
| 15 | from CordLogger import CordLogger |
| 16 | from VSGAccess import VSGAccess |
| 17 | #imports for cord-subscriber module |
| 18 | from subscriberDb import SubscriberDB |
| 19 | from Stats import Stats |
| 20 | from threadPool import ThreadPool |
| 21 | import threading |
| 22 | from EapTLS import TLSAuthTest |
| 23 | from CordTestUtils import log_test as log |
| 24 | from CordTestConfig import setup_module, running_on_ciab |
| 25 | from OnosCtrl import OnosCtrl |
| 26 | from CordContainer import Onos |
| 27 | from CordSubscriberUtils import CordSubscriberUtils, XosUtils |
| 28 | from CordTestServer import cord_test_onos_restart, cord_test_quagga_restart, cord_test_shell, cord_test_radius_restart |
| 29 | |
| 30 | |
| 31 | log.setLevel('INFO') |
| 32 | |
| 33 | class Subscriber(Channels): |
| 34 | log.info('in Subscriber class 0000000') |
| 35 | PORT_TX_DEFAULT = 2 |
| 36 | PORT_RX_DEFAULT = 1 |
| 37 | INTF_TX_DEFAULT = 'veth2' |
| 38 | INTF_RX_DEFAULT = 'veth0' |
| 39 | STATS_RX = 0 |
| 40 | STATS_TX = 1 |
| 41 | STATS_JOIN = 2 |
| 42 | STATS_LEAVE = 3 |
| 43 | SUBSCRIBER_SERVICES = 'DHCP IGMP TLS' |
| 44 | |
| 45 | def __init__(self, name = 'sub', service = SUBSCRIBER_SERVICES, port_map = None, |
| 46 | num = 1, channel_start = 0, |
| 47 | tx_port = PORT_TX_DEFAULT, rx_port = PORT_RX_DEFAULT, |
| 48 | iface = INTF_RX_DEFAULT, iface_mcast = INTF_TX_DEFAULT, |
| 49 | mcast_cb = None, loginType = 'wireless'): |
| 50 | self.tx_port = tx_port |
| 51 | self.rx_port = rx_port |
| 52 | self.port_map = port_map or g_subscriber_port_map |
| 53 | try: |
| 54 | self.tx_intf = self.port_map[tx_port] |
| 55 | self.rx_intf = self.port_map[rx_port] |
| 56 | except: |
| 57 | self.tx_intf = self.port_map[self.PORT_TX_DEFAULT] |
| 58 | self.rx_intf = self.port_map[self.PORT_RX_DEFAULT] |
| 59 | |
| 60 | log_test.info('Subscriber %s, rx interface %s, uplink interface %s' %(name, self.rx_intf, self.tx_intf)) |
| 61 | Channels.__init__(self, num, channel_start = channel_start, |
| 62 | iface = self.rx_intf, iface_mcast = self.tx_intf, mcast_cb = mcast_cb) |
| 63 | self.name = name |
| 64 | self.service = service |
| 65 | self.service_map = {} |
| 66 | services = self.service.strip().split(' ') |
| 67 | for s in services: |
| 68 | self.service_map[s] = True |
| 69 | self.loginType = loginType |
| 70 | ##start streaming channels |
| 71 | self.join_map = {} |
| 72 | ##accumulated join recv stats |
| 73 | self.join_rx_stats = Stats() |
| 74 | self.recv_timeout = False |
| 75 | def has_service(self, service): |
| 76 | if self.service_map.has_key(service): |
| 77 | return self.service_map[service] |
| 78 | if self.service_map.has_key(service.upper()): |
| 79 | return self.service_map[service.upper()] |
| 80 | return False |
| 81 | |
| 82 | def channel_join_update(self, chan, join_time): |
| 83 | self.join_map[chan] = ( Stats(), Stats(), Stats(), Stats() ) |
| 84 | self.channel_update(chan, self.STATS_JOIN, 1, t = join_time) |
| 85 | def channel_join(self, chan = 0, delay = 2): |
| 86 | '''Join a channel and create a send/recv stats map''' |
| 87 | if self.join_map.has_key(chan): |
| 88 | del self.join_map[chan] |
| 89 | self.delay = delay |
| 90 | chan, join_time = self.join(chan) |
| 91 | self.channel_join_update(chan, join_time) |
| 92 | return chan |
| 93 | |
| 94 | def channel_join_next(self, delay = 2, leave_flag = True): |
| 95 | '''Joins the next channel leaving the last channel''' |
| 96 | if self.last_chan: |
| 97 | if self.join_map.has_key(self.last_chan): |
| 98 | del self.join_map[self.last_chan] |
| 99 | self.delay = delay |
| 100 | chan, join_time = self.join_next(leave_flag = leave_flag) |
| 101 | self.channel_join_update(chan, join_time) |
| 102 | return chan |
| 103 | |
| 104 | def channel_jump(self, delay = 2): |
| 105 | '''Jumps randomly to the next channel leaving the last channel''' |
| 106 | if self.last_chan is not None: |
| 107 | if self.join_map.has_key(self.last_chan): |
| 108 | del self.join_map[self.last_chan] |
| 109 | self.delay = delay |
| 110 | chan, join_time = self.jump() |
| 111 | self.channel_join_update(chan, join_time) |
| 112 | return chan |
| 113 | |
| 114 | def channel_leave(self, chan = 0, force = False): |
| 115 | if self.join_map.has_key(chan): |
| 116 | del self.join_map[chan] |
| 117 | self.leave(chan, force = force) |
| 118 | |
| 119 | def channel_update(self, chan, stats_type, packets, t=0): |
| 120 | if type(chan) == type(0): |
| 121 | chan_list = (chan,) |
| 122 | else: |
| 123 | chan_list = chan |
| 124 | for c in chan_list: |
| 125 | if self.join_map.has_key(c): |
| 126 | self.join_map[c][stats_type].update(packets = packets, t = t) |
| 127 | def channel_receive(self, chan, cb = None, count = 1, timeout = 5): |
| 128 | log_test.info('Subscriber %s on port %s receiving from group %s, channel %d' % |
| 129 | (self.name, self.rx_intf, self.gaddr(chan), chan)) |
| 130 | r = self.recv(chan, cb = cb, count = count, timeout = timeout) |
| 131 | if len(r) == 0: |
| 132 | log_test.info('Subscriber %s on port %s timed out' %(self.name, self.rx_intf)) |
| 133 | else: |
| 134 | log_test.info('Subscriber %s on port %s received %d packets' %(self.name, self.rx_intf, len(r))) |
| 135 | if self.recv_timeout: |
| 136 | ##Negative test case is disabled for now |
| 137 | assert_equal(len(r), 0) |
| 138 | |
| 139 | def recv_channel_cb(self, pkt): |
| 140 | ##First verify that we have received the packet for the joined instance |
| 141 | log_test.info('Packet received for group %s, subscriber %s, port %s' % |
| 142 | (pkt[IP].dst, self.name, self.rx_intf)) |
| 143 | if self.recv_timeout: |
| 144 | return |
| 145 | chan = self.caddr(pkt[IP].dst) |
| 146 | assert_equal(chan in self.join_map.keys(), True) |
| 147 | recv_time = monotonic.monotonic() * 1000000 |
| 148 | join_time = self.join_map[chan][self.STATS_JOIN].start |
| 149 | delta = recv_time - join_time |
| 150 | self.join_rx_stats.update(packets=1, t = delta, usecs = True) |
| 151 | self.channel_update(chan, self.STATS_RX, 1, t = delta) |
| 152 | log_test.debug('Packet received in %.3f usecs for group %s after join' %(delta, pkt[IP].dst)) |
| 153 | |
| 154 | class subscriber_pool: |
| 155 | |
| 156 | def __init__(self, subscriber, test_cbs): |
| 157 | self.subscriber = subscriber |
| 158 | self.test_cbs = test_cbs |
| 159 | |
| 160 | def pool_cb(self): |
| 161 | for cb in self.test_cbs: |
| 162 | if cb: |
| 163 | self.test_status = cb(self.subscriber) |
| 164 | if self.test_status is not True: |
| 165 | ## This is chaning for other sub status has to check again |
| 166 | self.test_status = True |
| 167 | log_test.info('This service is failed and other services will not run for this subscriber') |
| 168 | break |
| 169 | log_test.info('This Subscriber is tested for multiple service eligibility ') |
| 170 | self.test_status = True |
| 171 | |
| 172 | class scale(object): |
| 173 | |
| 174 | USER = "vagrant" |
| 175 | PASS = "vagrant" |
| 176 | head_node = os.getenv('HEAD_NODE', 'prod') |
| 177 | HEAD_NODE = head_node + '.cord.lab' if len(head_node.split('.')) == 1 else head_node |
| 178 | MAX_PORTS = 100 |
| 179 | device_id = 'of:' + get_mac() |
| 180 | test_path = os.path.dirname(os.path.realpath(__file__)) |
| 181 | olt_conf_file = os.getenv('OLT_CONFIG_FILE', os.path.join(test_path, '..', 'setup/olt_config.json')) |
| 182 | olt = OltConfig(olt_conf_file = olt_conf_file) |
| 183 | APP_NAME = 'org.ciena.xconnect' |
| 184 | olt_apps = () |
| 185 | table_app = 'org.ciena.cordigmp' |
| 186 | table_app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-multitable-2.0-SNAPSHOT.oar') |
| 187 | app_file = os.path.join(test_path, '..', 'apps/ciena-cordigmp-2.0-SNAPSHOT.oar') |
| 188 | cpqd_path = os.path.join(test_path, '..', 'setup') |
| 189 | ovs_path = cpqd_path |
| 190 | test_services = ('IGMP', 'TRAFFIC') |
| 191 | num_joins = 0 |
| 192 | num_subscribers = 0 |
| 193 | leave_flag = True |
| 194 | recv_timeout = False |
| 195 | onos_restartable = bool(int(os.getenv('ONOS_RESTART', 0))) |
| 196 | PORT_TX_DEFAULT = 2 |
| 197 | PORT_RX_DEFAULT = 1 |
| 198 | IP_DST = '224.0.0.22' |
| 199 | IGMP_DST_MAC = "01:00:5e:00:00:16" |
| 200 | igmp_eth = Ether(dst = IGMP_DST_MAC, type = ETH_P_IP) |
| 201 | igmp_ip = IP(dst = IP_DST) |
Anil Kumar Sanka | 35fc445 | 2017-07-27 00:39:10 +0000 | [diff] [blame] | 202 | INGRESS_PORT = 1 |
| 203 | EGRESS_PORT = 2 |
| 204 | ingress_iface = 1 |
| 205 | egress_iface = 2 |
| 206 | MAX_PORTS = 100 |
| 207 | CURRENT_PORT_NUM = egress_iface |
| 208 | ACL_SRC_IP = '192.168.20.3/32' |
| 209 | ACL_DST_IP = '192.168.30.2/32' |
| 210 | ACL_SRC_IP_RULE_2 = '192.168.40.3/32' |
| 211 | ACL_DST_IP_RULE_2 = '192.168.50.2/32' |
| 212 | ACL_SRC_IP_PREFIX_24 = '192.168.20.3/24' |
| 213 | ACL_DST_IP_PREFIX_24 = '192.168.30.2/24' |
| 214 | HOST_DST_IP = '192.168.30.0/24' |
| 215 | HOST_DST_IP_RULE_2 = '192.168.50.0/24' |
| 216 | |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 217 | |
| 218 | |
| 219 | |
| 220 | CLIENT_CERT = """-----BEGIN CERTIFICATE----- |
| 221 | MIICuDCCAiGgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBizELMAkGA1UEBhMCVVMx |
| 222 | CzAJBgNVBAgTAkNBMRIwEAYDVQQHEwlTb21ld2hlcmUxEzARBgNVBAoTCkNpZW5h |
| 223 | IEluYy4xHjAcBgkqhkiG9w0BCQEWD2FkbWluQGNpZW5hLmNvbTEmMCQGA1UEAxMd |
| 224 | RXhhbXBsZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkwHhcNMTYwNjA2MjExMjI3WhcN |
| 225 | MTcwNjAxMjExMjI3WjBnMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNV |
| 226 | BAoTCkNpZW5hIEluYy4xFzAVBgNVBAMUDnVzZXJAY2llbmEuY29tMR0wGwYJKoZI |
| 227 | hvcNAQkBFg51c2VyQGNpZW5hLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC |
| 228 | gYEAwvXiSzb9LZ6c7uNziUfKvoHO7wu/uiFC5YUpXbmVGuGZizbVrny0xnR85Dfe |
| 229 | +9R4diansfDhIhzOUl1XjN3YDeSS9OeF5YWNNE8XDhlz2d3rVzaN6hIhdotBkUjg |
| 230 | rUewjTg5OFR31QEyG3v8xR3CLgiE9xQELjZbSA07pD79zuUCAwEAAaNPME0wEwYD |
| 231 | VR0lBAwwCgYIKwYBBQUHAwIwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL3d3dy5l |
| 232 | eGFtcGxlLmNvbS9leGFtcGxlX2NhLmNybDANBgkqhkiG9w0BAQUFAAOBgQDAjkrY |
| 233 | 6tDChmKbvr8w6Du/t8vHjTCoCIocHTN0qzWOeb1YsAGX89+TrWIuO1dFyYd+Z0KC |
| 234 | PDKB5j/ygml9Na+AklSYAVJIjvlzXKZrOaPmhZqDufi+rXWti/utVqY4VMW2+HKC |
| 235 | nXp37qWeuFLGyR1519Y1d6F/5XzqmvbwURuEug== |
| 236 | -----END CERTIFICATE-----""" |
| 237 | |
| 238 | CLIENT_CERT_INVALID = '''-----BEGIN CERTIFICATE----- |
| 239 | MIIDvTCCAqWgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBizELMAkGA1UEBhMCVVMx |
| 240 | CzAJBgNVBAgTAkNBMRIwEAYDVQQHEwlTb21ld2hlcmUxEzARBgNVBAoTCkNpZW5h |
| 241 | IEluYy4xHjAcBgkqhkiG9w0BCQEWD2FkbWluQGNpZW5hLmNvbTEmMCQGA1UEAxMd |
| 242 | RXhhbXBsZSBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkwHhcNMTYwMzExMTg1MzM2WhcN |
| 243 | MTcwMzA2MTg1MzM2WjBnMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0ExEzARBgNV |
| 244 | BAoTCkNpZW5hIEluYy4xFzAVBgNVBAMUDnVzZXJAY2llbmEuY29tMR0wGwYJKoZI |
| 245 | hvcNAQkBFg51c2VyQGNpZW5hLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC |
| 246 | AQoCggEBAOxemcBsPn9tZsCa5o2JA6sQDC7A6JgCNXXl2VFzKLNNvB9PS6D7ZBsQ |
| 247 | 5An0zEDMNzi51q7lnrYg1XyiE4S8FzMGAFr94RlGMQJUbRD9V/oqszMX4k++iAOK |
| 248 | tIA1gr3x7Zi+0tkjVSVzXTmgNnhChAamdMsjYUG5+CY9WAicXyy+VEV3zTphZZDR |
| 249 | OjcjEp4m/TSXVPYPgYDXI40YZKX5BdvqykWtT/tIgZb48RS1NPyN/XkCYzl3bv21 |
| 250 | qx7Mc0fcEbsJBIIRYTUkfxnsilcnmLxSYO+p+DZ9uBLBzcQt+4Rd5pLSfi21WM39 |
| 251 | 2Z2oOi3vs/OYAPAqgmi2JWOv3mePa/8CAwEAAaNPME0wEwYDVR0lBAwwCgYIKwYB |
| 252 | BQUHAwIwNgYDVR0fBC8wLTAroCmgJ4YlaHR0cDovL3d3dy5leGFtcGxlLmNvbS9l |
| 253 | eGFtcGxlX2NhLmNybDANBgkqhkiG9w0BAQUFAAOCAQEALBzMPDTIB6sLyPl0T6JV |
| 254 | MjOkyldAVhXWiQsTjaGQGJUUe1cmUJyZbUZEc13MygXMPOM4x7z6VpXGuq1c/Vxn |
| 255 | VzQ2fNnbJcIAHi/7G8W5/SQfPesIVDsHTEc4ZspPi5jlS/MVX3HOC+BDbOjdbwqP |
| 256 | RX0JEr+uOyhjO+lRxG8ilMRACoBUbw1eDuVDoEBgErSUC44pq5ioDw2xelc+Y6hQ |
| 257 | dmtYwfY0DbvwxHtA495frLyPcastDiT/zre7NL51MyUDPjjYjghNQEwvu66IKbQ3 |
| 258 | T1tJBrgI7/WI+dqhKBFolKGKTDWIHsZXQvZ1snGu/FRYzg1l+R/jT8cRB9BDwhUt |
| 259 | yg== |
| 260 | -----END CERTIFICATE-----''' |
| 261 | |
| 262 | ############ IGMP utility functions ####################### |
| 263 | def onos_ssm_table_load(self, groups, src_list = ['1.2.3.4'],flag = False): |
| 264 | ssm_dict = {'apps' : { 'org.opencord.igmp' : { 'ssmTranslate' : [] } } } |
| 265 | ssm_xlate_list = ssm_dict['apps']['org.opencord.igmp']['ssmTranslate'] |
| 266 | if flag: #to maintain seperate group-source pair. |
| 267 | for i in range(len(groups)): |
| 268 | d = {} |
| 269 | d['source'] = src_list[i] or '0.0.0.0' |
| 270 | d['group'] = groups[i] |
| 271 | ssm_xlate_list.append(d) |
| 272 | else: |
| 273 | for g in groups: |
| 274 | for s in src_list: |
| 275 | d = {} |
| 276 | d['source'] = s or '0.0.0.0' |
| 277 | d['group'] = g |
| 278 | ssm_xlate_list.append(d) |
| 279 | self.onos_load_config(ssm_dict) |
| 280 | cord_port_map = {} |
| 281 | for g in groups: |
| 282 | cord_port_map[g] = (self.PORT_TX_DEFAULT, self.PORT_RX_DEFAULT) |
| 283 | IgmpChannel().cord_port_table_load(cord_port_map) |
| 284 | time.sleep(2) |
| 285 | |
| 286 | def generate_random_multicast_ip_addresses(self,count=500): |
| 287 | multicast_ips = [] |
| 288 | while(count >= 1): |
| 289 | ip = '.'.join([str(random.randint(224,239)),str(random.randint(1,254)),str(random.randint(1,254)),str(random.randint(1,254))]) |
| 290 | if ip in multicast_ips: |
| 291 | pass |
| 292 | else: |
| 293 | multicast_ips.append(ip) |
| 294 | count -= 1 |
| 295 | return multicast_ips |
| 296 | |
| 297 | def generate_random_unicast_ip_addresses(self,count=1): |
| 298 | unicast_ips = [] |
| 299 | while(count >= 1): |
| 300 | ip = '.'.join([str(random.randint(11,126)),str(random.randint(1,254)),str(random.randint(1,254)),str(random.randint(1,254))]) |
| 301 | if ip in unicast_ips: |
| 302 | pass |
| 303 | else: |
| 304 | unicast_ips.append(ip) |
| 305 | count -= 1 |
| 306 | return unicast_ips |
| 307 | |
| 308 | def iptomac(self, mcast_ip): |
| 309 | mcast_mac = '01:00:5e:' |
| 310 | octets = mcast_ip.split('.') |
| 311 | second_oct = int(octets[1]) & 127 |
| 312 | third_oct = int(octets[2]) |
| 313 | fourth_oct = int(octets[3]) |
| 314 | mcast_mac = mcast_mac + format(second_oct,'02x') + ':' + format(third_oct, '02x') + ':' + format(fourth_oct, '02x') |
| 315 | return mcast_mac |
| 316 | |
| 317 | def send_igmp_join(self, groups, src_list = ['1.2.3.4'], record_type=IGMP_V3_GR_TYPE_INCLUDE, |
| 318 | ip_pkt = None, iface = 'veth0', ssm_load = False, delay = 1): |
| 319 | if ssm_load is True: |
| 320 | self.onos_ssm_table_load(groups, src_list) |
| 321 | igmp = IGMPv3(type = IGMP_TYPE_V3_MEMBERSHIP_REPORT, max_resp_code=30, |
| 322 | gaddr=self.IP_DST) |
| 323 | for g in groups: |
| 324 | gr = IGMPv3gr(rtype= record_type, mcaddr=g) |
| 325 | gr.sources = src_list |
| 326 | igmp.grps.append(gr) |
| 327 | if ip_pkt is None: |
| 328 | ip_pkt = self.igmp_eth/self.igmp_ip |
| 329 | pkt = ip_pkt/igmp |
| 330 | IGMPv3.fixup(pkt) |
| 331 | log.info('sending igmp join packet %s'%pkt.show()) |
| 332 | sendp(pkt, iface=iface) |
| 333 | time.sleep(delay) |
| 334 | |
| 335 | def send_multicast_data_traffic(self, group, intf= 'veth2',source = '1.2.3.4'): |
| 336 | dst_mac = self.iptomac(group) |
| 337 | eth = Ether(dst= dst_mac) |
| 338 | ip = IP(dst=group,src=source) |
| 339 | data = repr(monotonic.monotonic()) |
| 340 | sendp(eth/ip/data,count=20, iface = intf) |
| 341 | |
| 342 | def verify_igmp_data_traffic(self, group, intf='veth0', source='1.2.3.4' ): |
| 343 | log_test.info('verifying multicast traffic for group %s from source %s'%(group,source)) |
| 344 | self.success = False |
| 345 | def recv_task(): |
| 346 | def igmp_recv_cb(pkt): |
| 347 | #log_test.info('received multicast data packet is %s'%pkt.show()) |
| 348 | log_test.info('multicast data received for group %s from source %s'%(group,source)) |
| 349 | self.success = True |
| 350 | sniff(prn = igmp_recv_cb,lfilter = lambda p: IP in p and p[IP].dst == group and p[IP].src == source, count=1,timeout = 2, iface='veth0') |
| 351 | t = threading.Thread(target = recv_task) |
| 352 | t.start() |
| 353 | self.send_multicast_data_traffic(group,source=source) |
| 354 | t.join() |
| 355 | return self.success |
Anil Kumar Sanka | 35fc445 | 2017-07-27 00:39:10 +0000 | [diff] [blame] | 356 | ##################### acl utility functions ############################### |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 357 | |
| 358 | @classmethod |
Anil Kumar Sanka | 35fc445 | 2017-07-27 00:39:10 +0000 | [diff] [blame] | 359 | def acl_hosts_add(cls, dstHostIpMac, egress_iface_count = 1, egress_iface_num = None): |
| 360 | index = 0 |
| 361 | if egress_iface_num is None: |
| 362 | egress_iface_num = cls.egress_iface |
| 363 | for ip,_ in dstHostIpMac: |
| 364 | egress = cls.port_map[egress_iface_num] |
| 365 | log.info('Assigning ip %s to interface %s' %(ip, egress)) |
| 366 | config_cmds_egress = ( 'ifconfig {} 0'.format(egress), |
| 367 | 'ifconfig {0} up'.format(egress), |
| 368 | 'ifconfig {0} {1}'.format(egress, ip), |
| 369 | 'arping -I {0} {1} -c 2'.format(egress, ip.split('/')[0]), |
| 370 | 'ifconfig {0}'.format(egress), |
| 371 | ) |
| 372 | for cmd in config_cmds_egress: |
| 373 | os.system(cmd) |
| 374 | index += 1 |
| 375 | if index == egress_iface_count: |
| 376 | break |
| 377 | egress_iface_count += 1 |
| 378 | egress_iface_num += 1 |
| 379 | @classmethod |
| 380 | def acl_hosts_remove(cls, egress_iface_count = 1, egress_iface_num = None): |
| 381 | if egress_iface_num is None: |
| 382 | egress_iface_num = cls.egress_iface |
| 383 | n = 0 |
| 384 | for n in range(egress_iface_count): |
| 385 | egress = cls.port_map[egress_iface_num] |
| 386 | config_cmds_egress = ('ifconfig {} 0'.format(egress)) |
| 387 | os.system(config_cmds_egress) |
| 388 | egress_iface_num += 1 |
| 389 | def acl_rule_traffic_send_recv(self, srcMac, dstMac, srcIp, dstIp, ingress =None, egress=None, ip_proto=None, dstPortNum = None, positive_test = True): |
| 390 | if ingress is None: |
| 391 | ingress = self.ingress_iface |
| 392 | if egress is None: |
| 393 | egress = self.egress_iface |
| 394 | ingress = self.port_map[ingress] |
| 395 | egress = self.port_map[egress] |
| 396 | self.success = False if positive_test else True |
| 397 | timeout = 10 if positive_test else 1 |
| 398 | count = 2 if positive_test else 1 |
| 399 | self.start_sending = True |
| 400 | def recv_task(): |
| 401 | def recv_cb(pkt): |
| 402 | log.info('Pkt seen with ingress ip %s, egress ip %s' %(pkt[IP].src, pkt[IP].dst)) |
| 403 | self.success = True if positive_test else False |
| 404 | sniff(count=count, timeout=timeout, |
| 405 | lfilter = lambda p: IP in p and p[IP].dst == dstIp.split('/')[0] and p[IP].src == srcIp.split('/')[0], |
| 406 | prn = recv_cb, iface = egress) |
| 407 | self.start_sending = False |
| 408 | |
| 409 | t = threading.Thread(target = recv_task) |
| 410 | t.start() |
| 411 | L2 = Ether(src = srcMac, dst = dstMac) |
| 412 | L3 = IP(src = srcIp.split('/')[0], dst = dstIp.split('/')[0]) |
| 413 | pkt = L2/L3 |
| 414 | log.info('Sending a packet with dst ip %s, src ip %s , dst mac %s src mac %s on port %s to verify if flows are correct' % |
| 415 | (dstIp.split('/')[0], srcIp.split('/')[0], dstMac, srcMac, ingress)) |
| 416 | while self.start_sending is True: |
| 417 | sendp(pkt, count=50, iface = ingress) |
| 418 | t.join() |
| 419 | assert_equal(self.success, True) |
| 420 | |
| 421 | |
| 422 | |
| 423 | ############################# vrouter utility functiuons #################### |
| 424 | @classmethod |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 425 | def vrouter_setup(cls): |
| 426 | apps = ('org.onosproject.proxyarp', 'org.onosproject.hostprovider', 'org.onosproject.vrouter', 'org.onosproject.fwd') |
| 427 | for app in apps: |
| 428 | OnosCtrl(app).activate() |
| 429 | cls.port_map, cls.port_list = cls.olt.olt_port_map() |
| 430 | cls.vrouter_device_dict = { "devices" : { |
| 431 | "{}".format(cls.device_id) : { |
| 432 | "basic" : { |
| 433 | "driver" : "softrouter" |
| 434 | } |
| 435 | } |
| 436 | }, |
| 437 | } |
| 438 | cls.zebra_conf = ''' |
| 439 | password zebra |
| 440 | log stdout |
| 441 | service advanced-vty |
| 442 | ! |
| 443 | !debug zebra rib |
| 444 | !debug zebra kernel |
| 445 | !debug zebra fpm |
| 446 | ! |
| 447 | !interface eth1 |
| 448 | ! ip address 10.10.0.3/16 |
| 449 | line vty |
| 450 | exec-timeout 0 0 |
| 451 | ''' |
| 452 | @classmethod |
| 453 | def start_quagga(cls, networks = 4, peer_address = None, router_address = None): |
| 454 | log_test.info('Restarting Quagga container with configuration for %d networks' %(networks)) |
| 455 | config = cls.generate_conf(networks = networks, peer_address = peer_address, router_address = router_address) |
| 456 | if networks <= 10000: |
| 457 | boot_delay = 25 |
| 458 | else: |
| 459 | delay_map = [60, 100, 150, 200, 300, 450, 600, 800, 1000, 1200] |
| 460 | n = min(networks/100000, len(delay_map)-1) |
| 461 | boot_delay = delay_map[n] |
| 462 | cord_test_quagga_restart(config = config, boot_delay = boot_delay) |
| 463 | @classmethod |
| 464 | def generate_vrouter_conf(cls, networks = 4, peers = 1, peer_address = None, router_address = None): |
| 465 | num = 0 |
| 466 | if peer_address is None: |
| 467 | start_peer = ( 192 << 24) | ( 168 << 16) | (10 << 8) | 0 |
| 468 | end_peer = ( 200 << 24 ) | (168 << 16) | (10 << 8) | 0 |
| 469 | else: |
| 470 | ip = peer_address[0][0] |
| 471 | start_ip = ip.split('.') |
| 472 | start_peer = ( int(start_ip[0]) << 24) | ( int(start_ip[1]) << 16) | ( int(start_ip[2]) << 8) | 0 |
| 473 | end_peer = ((int(start_ip[0]) + 8) << 24 ) | (int(start_ip[1]) << 16) | (int(start_ip[2]) << 8) | 0 |
| 474 | local_network = end_peer + 1 |
| 475 | ports_dict = { 'ports' : {} } |
| 476 | interface_list = [] |
| 477 | peer_list = [] |
| 478 | for n in xrange(start_peer, end_peer, 256): |
| 479 | port_map = ports_dict['ports'] |
| 480 | port = num + 1 if num < cls.MAX_PORTS - 1 else cls.MAX_PORTS - 1 |
| 481 | device_port_key = '{0}/{1}'.format(cls.device_id, port) |
| 482 | try: |
| 483 | interfaces = port_map[device_port_key]['interfaces'] |
| 484 | except: |
| 485 | port_map[device_port_key] = { 'interfaces' : [] } |
| 486 | interfaces = port_map[device_port_key]['interfaces'] |
| 487 | ip = n + 2 |
| 488 | peer_ip = n + 1 |
| 489 | ips = '%d.%d.%d.%d/24'%( (ip >> 24) & 0xff, ( (ip >> 16) & 0xff ), ( (ip >> 8 ) & 0xff ), ip & 0xff) |
| 490 | peer = '%d.%d.%d.%d' % ( (peer_ip >> 24) & 0xff, ( ( peer_ip >> 16) & 0xff ), ( (peer_ip >> 8 ) & 0xff ), peer_ip & 0xff ) |
| 491 | mac = RandMAC()._fix() |
| 492 | peer_list.append((peer, mac)) |
| 493 | if num < cls.MAX_PORTS - 1: |
| 494 | interface_dict = { 'name' : 'b1-{}'.format(port), 'ips': [ips], 'mac' : mac } |
| 495 | interfaces.append(interface_dict) |
| 496 | interface_list.append(interface_dict['name']) |
| 497 | else: |
| 498 | interfaces[0]['ips'].append(ips) |
| 499 | num += 1 |
| 500 | if num == peers: |
| 501 | break |
| 502 | quagga_dict = { 'apps': { 'org.onosproject.router' : { 'router' : {}, 'bgp' : { 'bgpSpeakers' : [] } } } } |
| 503 | quagga_router_dict = quagga_dict['apps']['org.onosproject.router']['router'] |
| 504 | quagga_router_dict['ospfEnabled'] = True |
| 505 | quagga_router_dict['interfaces'] = interface_list |
| 506 | quagga_router_dict['controlPlaneConnectPoint'] = '{0}/{1}'.format(cls.device_id, peers + 1) |
| 507 | |
| 508 | #bgp_speaker_dict = { 'apps': { 'org.onosproject.router' : { 'bgp' : { 'bgpSpeakers' : [] } } } } |
| 509 | bgp_speakers_list = quagga_dict['apps']['org.onosproject.router']['bgp']['bgpSpeakers'] |
| 510 | speaker_dict = {} |
| 511 | speaker_dict['name'] = 'bgp{}'.format(peers+1) |
| 512 | speaker_dict['connectPoint'] = '{0}/{1}'.format(cls.device_id, peers + 1) |
| 513 | speaker_dict['peers'] = peer_list |
| 514 | bgp_speakers_list.append(speaker_dict) |
| 515 | cls.peer_list = peer_list |
| 516 | return (cls.vrouter_device_dict, ports_dict, quagga_dict) |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 517 | @classmethod |
| 518 | def generate_conf(cls, networks = 4, peer_address = None, router_address = None): |
| 519 | num = 0 |
| 520 | if router_address is None: |
| 521 | start_network = ( 11 << 24) | ( 10 << 16) | ( 10 << 8) | 0 |
| 522 | end_network = ( 172 << 24 ) | ( 0 << 16) | (0 << 8) | 0 |
| 523 | network_mask = 24 |
| 524 | else: |
| 525 | ip = router_address |
| 526 | start_ip = ip.split('.') |
| 527 | network_mask = int(start_ip[3].split('/')[1]) |
| 528 | start_ip[3] = (start_ip[3].split('/'))[0] |
| 529 | start_network = (int(start_ip[0]) << 24) | ( int(start_ip[1]) << 16) | ( int(start_ip[2]) << 8) | 0 |
| 530 | end_network = (172 << 24 ) | (int(start_ip[1]) << 16) | (int(start_ip[2]) << 8) | 0 |
| 531 | net_list = [] |
| 532 | peer_list = peer_address if peer_address is not None else cls.peer_list |
| 533 | network_list = [] |
| 534 | for n in xrange(start_network, end_network, 256): |
| 535 | net = '%d.%d.%d.0'%( (n >> 24) & 0xff, ( ( n >> 16) & 0xff ), ( (n >> 8 ) & 0xff ) ) |
| 536 | network_list.append(net) |
| 537 | gateway = peer_list[num % len(peer_list)][0] |
| 538 | net_route = 'ip route {0}/{1} {2}'.format(net, network_mask, gateway) |
| 539 | net_list.append(net_route) |
| 540 | num += 1 |
| 541 | if num == networks: |
| 542 | break |
| 543 | cls.network_list = network_list |
| 544 | cls.network_mask = network_mask |
| 545 | zebra_routes = '\n'.join(net_list) |
| 546 | #log_test.info('Zebra routes: \n:%s\n' %cls.zebra_conf + zebra_routes) |
| 547 | return cls.zebra_conf + zebra_routes |
| 548 | |
| 549 | @classmethod |
| 550 | def vrouter_host_load(cls, peer_address = None): |
| 551 | index = 1 |
| 552 | peer_info = peer_address if peer_address is not None else cls.peer_list |
| 553 | |
| 554 | for host,_ in peer_info: |
| 555 | iface = cls.port_map[index] |
| 556 | index += 1 |
| 557 | log_test.info('Assigning ip %s to interface %s' %(host, iface)) |
| 558 | config_cmds = ( 'ifconfig {} 0'.format(iface), |
| 559 | 'ifconfig {0} {1}'.format(iface, host), |
| 560 | 'arping -I {0} {1} -c 2'.format(iface, host), |
| 561 | ) |
| 562 | for cmd in config_cmds: |
| 563 | os.system(cmd) |
| 564 | @classmethod |
| 565 | def vrouter_host_unload(cls, peer_address = None): |
| 566 | index = 1 |
| 567 | peer_info = peer_address if peer_address is not None else cls.peer_list |
| 568 | |
| 569 | for host,_ in peer_info: |
| 570 | iface = cls.port_map[index] |
| 571 | index += 1 |
| 572 | config_cmds = ('ifconfig {} 0'.format(iface), ) |
| 573 | for cmd in config_cmds: |
| 574 | os.system(cmd) |
| 575 | |
| 576 | @classmethod |
| 577 | def vrouter_config_get(cls, networks = 4, peers = 1, peer_address = None, |
| 578 | route_update = None, router_address = None): |
| 579 | vrouter_configs = cls.generate_vrouter_conf(networks = networks, peers = peers, |
| 580 | peer_address = peer_address, router_address = router_address) |
| 581 | return vrouter_configs |
| 582 | |
| 583 | @classmethod |
| 584 | def vrouter_configure(cls, networks = 4, peers = 1, peer_address = None, |
| 585 | route_update = None, router_address = None, time_expire = None, adding_new_routes = None): |
| 586 | vrouter_configs = cls.vrouter_config_get(networks = networks, peers = peers, |
| 587 | peer_address = peer_address, route_update = route_update) |
| 588 | cls.start_onos(network_cfg = vrouter_configs) |
| 589 | time.sleep(5) |
| 590 | cls.vrouter_host_load() |
| 591 | ##Start quagga |
| 592 | cls.start_quagga(networks = networks, peer_address = peer_address, router_address = router_address) |
| 593 | return vrouter_configs |
| 594 | def vrouter_port_send_recv(self, ingress, egress, dst_mac, dst_ip, positive_test = True): |
| 595 | src_mac = '00:00:00:00:00:02' |
| 596 | src_ip = '1.1.1.1' |
| 597 | self.success = False if positive_test else True |
| 598 | timeout = 10 if positive_test else 1 |
| 599 | count = 2 if positive_test else 1 |
| 600 | self.start_sending = True |
| 601 | def recv_task(): |
| 602 | def recv_cb(pkt): |
| 603 | log_test.info('Pkt seen with ingress ip %s, egress ip %s' %(pkt[IP].src, pkt[IP].dst)) |
| 604 | self.success = True if positive_test else False |
| 605 | sniff(count=count, timeout=timeout, |
| 606 | lfilter = lambda p: IP in p and p[IP].dst == dst_ip and p[IP].src == src_ip, |
| 607 | prn = recv_cb, iface = self.port_map[ingress]) |
| 608 | self.start_sending = False |
| 609 | |
| 610 | t = threading.Thread(target = recv_task) |
| 611 | t.start() |
| 612 | L2 = Ether(src = src_mac, dst = dst_mac) |
| 613 | L3 = IP(src = src_ip, dst = dst_ip) |
| 614 | pkt = L2/L3 |
| 615 | log_test.info('Sending a packet with dst ip %s, dst mac %s on port %s to verify if flows are correct' % |
| 616 | (dst_ip, dst_mac, self.port_map[egress])) |
| 617 | while self.start_sending is True: |
| 618 | sendp(pkt, count=50, iface = self.port_map[egress]) |
| 619 | t.join() |
| 620 | assert_equal(self.success, True) |
| 621 | |
| 622 | def vrouter_traffic_verify(self, positive_test = True, peer_address = None): |
| 623 | if peer_address is None: |
| 624 | peers = len(self.peer_list) |
| 625 | peer_list = self.peer_list |
| 626 | else: |
| 627 | peers = len(peer_address) |
| 628 | peer_list = peer_address |
| 629 | egress = peers + 1 |
| 630 | num = 0 |
| 631 | num_hosts = 5 if positive_test else 1 |
| 632 | src_mac = '00:00:00:00:00:02' |
| 633 | src_ip = '1.1.1.1' |
| 634 | if self.network_mask != 24: |
| 635 | peers = 1 |
| 636 | for network in self.network_list: |
| 637 | num_ips = num_hosts |
| 638 | octets = network.split('.') |
| 639 | for i in xrange(num_ips): |
| 640 | octets[-1] = str(int(octets[-1]) + 1) |
| 641 | dst_ip = '.'.join(octets) |
| 642 | dst_mac = peer_list[ num % peers ] [1] |
| 643 | port = (num % peers) |
| 644 | ingress = port + 1 |
| 645 | #Since peers are on the same network |
| 646 | ##Verify if flows are setup by sending traffic across |
| 647 | self.vrouter_port_send_recv(ingress, egress, dst_mac, dst_ip, positive_test = positive_test) |
| 648 | num += 1 |
| 649 | def vrouter_network_verify(self, networks, peers = 1, positive_test = True, |
| 650 | start_network = None, start_peer_address = None, route_update = None, |
| 651 | invalid_peers = None, time_expire = None, unreachable_route_traffic = None, |
| 652 | deactivate_activate_vrouter = None, adding_new_routes = None): |
| 653 | print 'no.of networks are.....', networks |
| 654 | self.vrouter_setup() |
| 655 | _, ports_map, egress_map = self.vrouter_configure(networks = networks, peers = peers, |
| 656 | peer_address = start_peer_address, |
| 657 | route_update = route_update, |
| 658 | router_address = start_network, |
| 659 | time_expire = time_expire, |
| 660 | adding_new_routes = adding_new_routes) |
| 661 | self.vrouter_traffic_verify() |
| 662 | self.vrouter_host_unload() |
| 663 | return True |
| 664 | |
| 665 | ############### Cord Subscriber utility functions ######################### |
| 666 | |
| 667 | @classmethod |
| 668 | def flows_setup(cls): |
| 669 | cls.olt = OltConfig() |
| 670 | cls.port_map, _ = cls.olt.olt_port_map() |
| 671 | if not cls.port_map: |
| 672 | cls.port_map = cls.default_port_map |
| 673 | cls.device_id = OnosCtrl.get_device_id() |
| 674 | num_ports = len(cls.port_map['ports'] + cls.port_map['relay_ports']) |
| 675 | cls.port_offset = int(os.getenv('TEST_INSTANCE', 0)) * num_ports |
| 676 | |
| 677 | @classmethod |
| 678 | def update_apps_version(cls): |
| 679 | version = Onos.getVersion() |
| 680 | major = int(version.split('.')[0]) |
| 681 | minor = int(version.split('.')[1]) |
| 682 | cordigmp_app_version = '2.0-SNAPSHOT' |
| 683 | olt_app_version = '1.2-SNAPSHOT' |
| 684 | if major > 1: |
| 685 | cordigmp_app_version = '3.0-SNAPSHOT' |
| 686 | olt_app_version = '2.0-SNAPSHOT' |
| 687 | elif major == 1: |
| 688 | if minor > 10: |
| 689 | cordigmp_app_version = '3.0-SNAPSHOT' |
| 690 | olt_app_version = '2.0-SNAPSHOT' |
| 691 | elif minor <= 8: |
| 692 | olt_app_version = '1.1-SNAPSHOT' |
| 693 | cls.app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-{}.oar'.format(cordigmp_app_version)) |
| 694 | cls.table_app_file = os.path.join(cls.test_path, '..', 'apps/ciena-cordigmp-multitable-{}.oar'.format(cordigmp_app_version)) |
| 695 | cls.olt_app_file = os.path.join(cls.test_path, '..', 'apps/olt-app-{}.oar'.format(olt_app_version)) |
| 696 | |
| 697 | @classmethod |
| 698 | def subscriber_setup(cls): |
| 699 | log.info('in subscriber_setup function 000000000') |
| 700 | cls.subscriber_apps = ('org.opencord.aaa', 'org.onosproject.dhcp') |
| 701 | for app in cls.subscriber_apps: |
| 702 | OnosCtrl(app).activate() |
| 703 | cls.update_apps_version() |
| 704 | #dids = OnosCtrl.get_device_ids() |
| 705 | #device_map = {} |
| 706 | #for did in dids: |
| 707 | # device_map[did] = { 'basic' : { 'driver' : 'pmc-olt' } } |
| 708 | #network_cfg = {} |
| 709 | #network_cfg = { 'devices' : device_map } |
| 710 | #Restart ONOS with cpqd driver config for OVS |
| 711 | #cls.start_onos(network_cfg = network_cfg) |
| 712 | cls.port_map, cls.port_list = cls.olt.olt_port_map() |
| 713 | cls.switches = cls.port_map['switches'] |
| 714 | cls.num_ports = cls.port_map['num_ports'] |
| 715 | if cls.num_ports > 1: |
| 716 | cls.num_ports -= 1 ##account for the tx port |
| 717 | #Uninstall the existing app if any |
| 718 | #OnosCtrl.uninstall_app(cls.table_app) |
| 719 | #log_test.info('Installing the multi table app %s for subscriber test' %(cls.table_app_file)) |
| 720 | #OnosCtrl.install_app(cls.table_app_file) |
| 721 | |
| 722 | @classmethod |
| 723 | def subscriber_teardown(cls): |
| 724 | log.info('in subscriber_teardown function 000000000') |
| 725 | apps = cls.olt_apps + cls.subscriber_apps #( cls.table_app,) |
| 726 | for app in apps: |
| 727 | OnosCtrl(app).deactivate() |
| 728 | #cls.start_onos(network_cfg = {}) |
| 729 | #OnosCtrl.uninstall_app(cls.table_app) |
| 730 | #log_test.info('Installing back the cord igmp app %s for subscriber test on exit' %(cls.app_file)) |
| 731 | #OnosCtrl.install_app(cls.app_file) |
| 732 | |
| 733 | @classmethod |
| 734 | def start_cpqd(cls, mac = '00:11:22:33:44:55'): |
| 735 | dpid = mac.replace(':', '') |
| 736 | cpqd_file = os.sep.join( (cls.cpqd_path, 'cpqd.sh') ) |
| 737 | cpqd_cmd = '{} {}'.format(cpqd_file, dpid) |
| 738 | ret = os.system(cpqd_cmd) |
| 739 | assert_equal(ret, 0) |
| 740 | time.sleep(10) |
| 741 | device_id = 'of:{}{}'.format('0'*4, dpid) |
| 742 | return device_id |
| 743 | |
| 744 | @classmethod |
| 745 | def start_ovs(cls): |
| 746 | ovs_file = os.sep.join( (cls.ovs_path, 'of-bridge.sh') ) |
| 747 | ret = os.system(ovs_file) |
| 748 | assert_equal(ret, 0) |
| 749 | time.sleep(30) |
| 750 | @classmethod |
| 751 | def ovs_cleanup(cls): |
| 752 | log.info('executing ovs_cleanup function 000000000000000000') |
| 753 | ##For every test case, delete all the OVS groups |
| 754 | cmd = 'ovs-ofctl del-groups br-int -OOpenFlow11 >/dev/null 2>&1' |
| 755 | try: |
| 756 | cord_test_shell(cmd) |
| 757 | ##Since olt config is used for this test, we just fire a careless local cmd as well |
| 758 | os.system(cmd) |
| 759 | finally: |
| 760 | return |
| 761 | def tls_verify(self, subscriber): |
| 762 | def tls_fail_cb(): |
| 763 | log_test.info('TLS verification failed') |
| 764 | if subscriber.has_service('TLS'): |
| 765 | #OnosCtrl('org.opencord.aaa').deactivate() |
| 766 | #time.sleep(2) |
| 767 | #OnosCtrl('org.opencord.aaa').activate() |
| 768 | #time.sleep(5) |
| 769 | tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = subscriber.rx_intf) |
| 770 | log_test.info('Running subscriber %s tls auth test' %subscriber.name) |
| 771 | tls.runTest() |
| 772 | assert_equal(tls.failTest, False) |
| 773 | self.test_status = True |
| 774 | return self.test_status |
| 775 | else: |
| 776 | self.test_status = True |
| 777 | return self.test_status |
| 778 | |
| 779 | def generate_port_list(self, subscribers, channels): |
| 780 | log.info('port list in generate port list is %s'%self.port_list) |
| 781 | return self.port_list[:subscribers] |
| 782 | def subscriber_load(self, create = True, num = 10, num_channels = 1, channel_start = 0, port_list = [], services = None): |
| 783 | '''Load the subscriber from the database''' |
| 784 | log.info('executing subscriber_load finction 000000000') |
| 785 | test_services = services if services else self.test_services |
| 786 | self.subscriber_db = SubscriberDB(create = create, services = test_services) |
| 787 | if create is True: |
| 788 | self.subscriber_db.generate(num) |
| 789 | self.subscriber_info = self.subscriber_db.read(num) |
| 790 | self.subscriber_list = [] |
| 791 | if not port_list: |
| 792 | port_list = self.generate_port_list(num, num_channels) |
| 793 | log.info('port_list in subscriber load is %s'%port_list) |
| 794 | index = 0 |
| 795 | for info in self.subscriber_info: |
| 796 | self.subscriber_list.append(Subscriber(name=info['Name'], |
| 797 | service=info['Service'], |
| 798 | port_map = self.port_map, |
| 799 | num=num_channels, |
| 800 | channel_start = channel_start, |
| 801 | tx_port = port_list[index][0], |
| 802 | rx_port = port_list[index][1])) |
| 803 | if num_channels > 1: |
| 804 | channel_start += num_channels |
| 805 | index += 1 |
| 806 | #load the ssm list for all subscriber channels |
| 807 | igmpChannel = IgmpChannel() |
| 808 | ssm_groups = map(lambda sub: sub.channels, self.subscriber_list) |
| 809 | ssm_list = reduce(lambda ssm1, ssm2: ssm1+ssm2, ssm_groups) |
| 810 | igmpChannel.igmp_load_ssm_config(ssm_list) |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 811 | def subscriber_join_verify( self, num_subscribers = 10, num_channels = 1, |
| 812 | channel_start = 0, cbs = None, port_list = [], |
| 813 | services = None, negative_subscriber_auth = None): |
| 814 | log.info('in subscriber_join_verify function 000000000') |
| 815 | self.test_status = False |
| 816 | self.ovs_cleanup() |
| 817 | subscribers_count = num_subscribers |
| 818 | sub_loop_count = num_subscribers |
| 819 | self.subscriber_load(create = True, num = num_subscribers, |
| 820 | num_channels = num_channels, channel_start = channel_start, port_list = port_list, |
| 821 | services = services) |
| 822 | self.onos_aaa_config() |
| 823 | self.thread_pool = ThreadPool(min(100, subscribers_count), queue_size=1, wait_timeout=1) |
| 824 | chan_leave = False #for single channel, multiple subscribers |
| 825 | if cbs is None: |
| 826 | cbs = (self.tls_verify, self.dhcp_verify, self.igmp_verify, self.traffic_verify) |
| 827 | chan_leave = True |
| 828 | cbs_negative = cbs |
| 829 | for subscriber in self.subscriber_list: |
| 830 | if services and 'IGMP' in services: |
| 831 | subscriber.start() |
| 832 | if negative_subscriber_auth is 'half' and sub_loop_count%2 is not 0: |
| 833 | cbs = (self.tls_verify, self.dhcp_verify, self.igmp_verify, self.traffic_verify) |
| 834 | elif negative_subscriber_auth is 'onethird' and sub_loop_count%3 is not 0: |
| 835 | cbs = (self.tls_verify, self.dhcp_verify, self.igmp_verify, self.traffic_verify) |
| 836 | else: |
| 837 | cbs = cbs_negative |
| 838 | sub_loop_count = sub_loop_count - 1 |
| 839 | pool_object = subscriber_pool(subscriber, cbs) |
| 840 | self.thread_pool.addTask(pool_object.pool_cb) |
| 841 | self.thread_pool.cleanUpThreads() |
| 842 | for subscriber in self.subscriber_list: |
| 843 | if services and 'IGMP' in services: |
| 844 | subscriber.stop() |
| 845 | if chan_leave is True: |
| 846 | subscriber.channel_leave(0) |
| 847 | subscribers_count = 0 |
| 848 | return self.test_status |
| 849 | def tls_invalid_cert(self, subscriber): |
| 850 | log.info('in tls_invalid_cert function 000000000000000') |
| 851 | if subscriber.has_service('TLS'): |
| 852 | time.sleep(2) |
| 853 | log_test.info('Running subscriber %s tls auth test' %subscriber.name) |
| 854 | tls = TLSAuthTest(client_cert = self.CLIENT_CERT_INVALID) |
| 855 | tls.runTest() |
| 856 | if tls.failTest == True: |
| 857 | self.test_status = False |
| 858 | return self.test_status |
| 859 | else: |
| 860 | self.test_status = True |
| 861 | return self.test_status |
| 862 | |
| 863 | def tls_verify(self, subscriber): |
| 864 | def tls_fail_cb(): |
| 865 | log_test.info('TLS verification failed') |
| 866 | if subscriber.has_service('TLS'): |
| 867 | tls = TLSAuthTest(fail_cb = tls_fail_cb, intf = subscriber.rx_intf) |
| 868 | log_test.info('Running subscriber %s tls auth test' %subscriber.name) |
| 869 | tls.runTest() |
| 870 | assert_equal(tls.failTest, False) |
| 871 | self.test_status = True |
| 872 | return self.test_status |
| 873 | else: |
| 874 | self.test_status = True |
| 875 | return self.test_status |
| 876 | |
| 877 | def tls_non_ca_authrized_cert(self, subscriber): |
| 878 | if subscriber.has_service('TLS'): |
| 879 | time.sleep(2) |
| 880 | log_test.info('Running subscriber %s tls auth test' %subscriber.name) |
| 881 | tls = TLSAuthTest(client_cert = self.CLIENT_CERT_NON_CA_AUTHORIZED) |
| 882 | tls.runTest() |
| 883 | if tls.failTest == False: |
| 884 | self.test_status = True |
| 885 | return self.test_status |
| 886 | else: |
| 887 | self.test_status = True |
| 888 | return self.test_status |
| 889 | |
| 890 | def dhcp_verify(self, subscriber): |
| 891 | log.info('in dhcp_verify function 000000000000000') |
| 892 | if subscriber.has_service('DHCP'): |
| 893 | cip, sip = self.dhcp_request(subscriber, update_seed = True) |
| 894 | log_test.info('Subscriber %s got client ip %s from server %s' %(subscriber.name, cip, sip)) |
| 895 | subscriber.src_list = [cip] |
| 896 | self.test_status = True |
| 897 | return self.test_status |
| 898 | else: |
| 899 | subscriber.src_list = ['10.10.10.{}'.format(subscriber.rx_port)] |
| 900 | self.test_status = True |
| 901 | return self.test_status |
| 902 | def dhcp_jump_verify(self, subscriber): |
| 903 | if subscriber.has_service('DHCP'): |
| 904 | cip, sip = self.dhcp_request(subscriber, seed_ip = '10.10.200.1') |
| 905 | log_test.info('Subscriber %s got client ip %s from server %s' %(subscriber.name, cip, sip)) |
| 906 | subscriber.src_list = [cip] |
| 907 | self.test_status = True |
| 908 | return self.test_status |
| 909 | else: |
| 910 | subscriber.src_list = ['10.10.10.{}'.format(subscriber.rx_port)] |
| 911 | self.test_status = True |
| 912 | return self.test_status |
| 913 | |
| 914 | def igmp_verify(self, subscriber): |
| 915 | log.info('in igmp_verify function 000000000000000') |
| 916 | chan = 0 |
| 917 | if subscriber.has_service('IGMP'): |
| 918 | ##We wait for all the subscribers to join before triggering leaves |
| 919 | if subscriber.rx_port > 1: |
| 920 | time.sleep(5) |
| 921 | subscriber.channel_join(chan, delay = 0) |
| 922 | self.num_joins += 1 |
| 923 | while self.num_joins < self.num_subscribers: |
| 924 | time.sleep(5) |
| 925 | log_test.info('All subscribers have joined the channel') |
| 926 | for i in range(10): |
| 927 | subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10) |
| 928 | log_test.info('Leaving channel %d for subscriber %s' %(chan, subscriber.name)) |
| 929 | subscriber.channel_leave(chan) |
| 930 | time.sleep(5) |
| 931 | log_test.info('Interface %s Join RX stats for subscriber %s, %s' %(subscriber.iface, subscriber.name,subscriber.join_rx_stats)) |
| 932 | #Should not receive packets for this subscriber |
| 933 | self.recv_timeout = True |
| 934 | subscriber.recv_timeout = True |
| 935 | subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 10) |
| 936 | subscriber.recv_timeout = False |
| 937 | self.recv_timeout = False |
| 938 | log_test.info('Joining channel %d for subscriber %s' %(chan, subscriber.name)) |
| 939 | subscriber.channel_join(chan, delay = 0) |
| 940 | self.test_status = True |
| 941 | return self.test_status |
| 942 | |
| 943 | def igmp_jump_verify(self, subscriber): |
| 944 | if subscriber.has_service('IGMP'): |
| 945 | for i in xrange(subscriber.num): |
| 946 | log_test.info('Subscriber %s jumping channel' %subscriber.name) |
| 947 | chan = subscriber.channel_jump(delay=0) |
| 948 | subscriber.channel_receive(chan, cb = subscriber.recv_channel_cb, count = 1) |
| 949 | log_test.info('Verified receive for channel %d, subscriber %s' %(chan, subscriber.name)) |
| 950 | time.sleep(3) |
| 951 | log_test.info('Interface %s Jump RX stats for subscriber %s, %s' %(subscriber.iface, subscriber.name, subscriber.join_rx_stats)) |
| 952 | self.test_status = True |
| 953 | return self.test_status |
| 954 | def traffic_verify(self, subscriber): |
| 955 | if subscriber.has_service('TRAFFIC'): |
| 956 | url = 'http://www.google.com' |
| 957 | resp = requests.get(url) |
| 958 | self.test_status = resp.ok |
| 959 | if resp.ok == False: |
| 960 | log_test.info('Subscriber %s failed get from url %s with status code %d' |
| 961 | %(subscriber.name, url, resp.status_code)) |
| 962 | else: |
| 963 | log_test.info('GET request from %s succeeded for subscriber %s' |
| 964 | %(url, subscriber.name)) |
| 965 | return self.test_status |
| 966 | ################## common utility functions ####################### |
| 967 | def get_system_cpu_usage(self): |
| 968 | """ Getting compute node CPU usage """ |
| 969 | ssh_agent = SSHTestAgent(host = self.HEAD_NODE, user = self.USER, password = self.PASS) |
| 970 | cmd = "top -b -n1 | grep 'Cpu(s)' | awk '{print $2 + $4}'" |
| 971 | status, output = ssh_agent.run_cmd(cmd) |
| 972 | assert_equal(status, True) |
| 973 | return float(output) |
| 974 | |
| 975 | @classmethod |
| 976 | def start_onos(cls, network_cfg = None): |
| 977 | if type(network_cfg) is tuple: |
| 978 | res = [] |
| 979 | for v in network_cfg: |
| 980 | res += v.items() |
| 981 | config = dict(res) |
| 982 | else: |
| 983 | config = network_cfg |
| 984 | log_test.info('Restarting ONOS with new network configuration') |
| 985 | return cord_test_onos_restart(config = config) |
| 986 | |
| 987 | @classmethod |
| 988 | def config_restore(cls): |
| 989 | """Restore the vsg test configuration on test case failures""" |
| 990 | for restore_method in cls.restore_methods: |
| 991 | restore_method() |
| 992 | |
| 993 | def onos_aaa_config(self): |
| 994 | log.info('executing onos_aaa_config function 000000000000000000') |
| 995 | aaa_dict = {'apps' : { 'org.opencord.aaa' : { 'AAA' : { 'radiusSecret': 'radius_password', |
| 996 | 'radiusIp': '172.17.0.2' } } } } |
| 997 | radius_ip = os.getenv('ONOS_AAA_IP') or '172.17.0.2' |
| 998 | aaa_dict['apps']['org.opencord.aaa']['AAA']['radiusIp'] = radius_ip |
| 999 | self.onos_load_config(aaa_dict) |
| 1000 | |
| 1001 | def onos_load_config(self, config): |
| 1002 | status, code = OnosCtrl.config(config) |
| 1003 | if status is False: |
| 1004 | log_test.info('Configure request for AAA returned status %d' %code) |
| 1005 | assert_equal(status, True) |
| 1006 | time.sleep(3) |
| 1007 | def cliEnter(self): |
| 1008 | retries = 0 |
| 1009 | while retries < 3: |
| 1010 | self.cli = OnosCliDriver(connect = True) |
| 1011 | if self.cli.handle: |
| 1012 | break |
| 1013 | else: |
| 1014 | retries += 1 |
| 1015 | time.sleep(2) |
| 1016 | |
| 1017 | def cliExit(self): |
| 1018 | self.cli.disconnect() |
| 1019 | |
| 1020 | def incmac(self, mac): |
| 1021 | tmp = str(hex(int('0x'+mac,16)+1).split('x')[1]) |
| 1022 | mac = '0'+ tmp if len(tmp) < 2 else tmp |
| 1023 | return mac |
| 1024 | |
| 1025 | def next_mac(self, mac): |
| 1026 | mac = mac.split(":") |
| 1027 | mac[5] = self.incmac(mac[5]) |
| 1028 | |
| 1029 | if len(mac[5]) > 2: |
| 1030 | mac[0] = self.incmac(mac[0]) |
| 1031 | mac[5] = '01' |
| 1032 | |
| 1033 | if len(mac[0]) > 2: |
| 1034 | mac[0] = '01' |
| 1035 | mac[1] = self.incmac(mac[1]) |
| 1036 | mac[5] = '01' |
| 1037 | return ':'.join(mac) |
| 1038 | |
| 1039 | def to_egress_mac(cls, mac): |
| 1040 | mac = mac.split(":") |
| 1041 | mac[4] = '01' |
| 1042 | return ':'.join(mac) |
| 1043 | |
| 1044 | def inc_ip(self, ip, i): |
Anil Kumar Sanka | 35fc445 | 2017-07-27 00:39:10 +0000 | [diff] [blame] | 1045 | |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 1046 | ip[i] =str(int(ip[i])+1) |
| 1047 | return '.'.join(ip) |
Anil Kumar Sanka | fcb9a0f | 2017-07-22 00:24:35 +0000 | [diff] [blame] | 1048 | def next_ip(self, ip): |
| 1049 | |
| 1050 | lst = ip.split('.') |
| 1051 | for i in (3,0,-1): |
| 1052 | if int(lst[i]) < 255: |
| 1053 | return self.inc_ip(lst, i) |
| 1054 | elif int(lst[i]) == 255: |
| 1055 | lst[i] = '0' |
| 1056 | if int(lst[i-1]) < 255: |
| 1057 | return self.inc_ip(lst,i-1) |
| 1058 | elif int(lst[i-2]) < 255: |
| 1059 | lst[i-1] = '0' |
| 1060 | return self.inc_ip(lst,i-2) |
| 1061 | else: |
| 1062 | break |
| 1063 | |
| 1064 | def to_egress_ip(self, ip): |
| 1065 | lst=ip.split('.') |
| 1066 | lst[0] = '182' |
| 1067 | return '.'.join(lst) |