Anil Kumar Sanka | 8915c83 | 2017-02-02 01:07:53 +0000 | [diff] [blame] | 1 | # |
| 2 | # Copyright 2016-present Ciena Corporation |
| 3 | # |
| 4 | # Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | # you may not use this file except in compliance with the License. |
| 6 | # You may obtain a copy of the License at |
| 7 | # |
| 8 | # http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | # |
| 10 | # Unless required by applicable law or agreed to in writing, software |
| 11 | # distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | # See the License for the specific language governing permissions and |
| 14 | # limitations under the License. |
| 15 | # |
| 16 | import unittest |
| 17 | from nose.tools import * |
| 18 | from scapy.all import * |
| 19 | from OnosCtrl import OnosCtrl, get_mac |
| 20 | from OltConfig import OltConfig |
| 21 | from OnosFlowCtrl import OnosFlowCtrl |
| 22 | from onosclidriver import OnosCliDriver |
| 23 | #from quaggaclidriver import QuaggaCliDriver |
| 24 | from CordContainer import Container, Onos, Quagga |
| 25 | from CordTestServer import cord_test_onos_restart, cord_test_quagga_restart, cord_test_quagga_stop, cord_test_quagga_shell |
| 26 | from portmaps import g_subscriber_port_map |
| 27 | from CordLogger import CordLogger |
| 28 | import threading |
| 29 | import time |
| 30 | import os |
| 31 | import json |
| 32 | import pexpect |
| 33 | import random |
| 34 | from netaddr.ip import IPNetwork, IPAddress |
| 35 | |
| 36 | #from cli import quagga |
| 37 | #from quagga import * |
| 38 | #from cli import requires |
| 39 | #from cli import system |
| 40 | #from generic import * |
| 41 | |
| 42 | log.setLevel('INFO') |
| 43 | |
| 44 | class ipv6vrouter_exchange(CordLogger): |
| 45 | |
| 46 | apps = ('org.onosproject.vrouter', 'org.onosproject.fwd') |
| 47 | device_id = 'of:' + get_mac() |
| 48 | vrouter_device_dict = { "devices" : { |
| 49 | "{}".format(device_id) : { |
| 50 | "basic" : { |
| 51 | "driver" : "softrouter" |
| 52 | } |
| 53 | } |
| 54 | }, |
| 55 | } |
| 56 | zebra_conf = ''' |
| 57 | password zebra |
| 58 | log stdout |
| 59 | service advanced-vty |
| 60 | ! |
| 61 | !debug zebra rib |
| 62 | !debug zebra kernel |
| 63 | !debug zebra fpm |
| 64 | ! |
| 65 | interface eth1 |
| 66 | ipv6 address 2001::10/32 |
| 67 | line vty |
| 68 | exec-timeout 0 0 |
| 69 | ''' |
| 70 | |
| 71 | #! ip address 10.10.0.3/16 |
| 72 | test_path = os.path.dirname(os.path.realpath(__file__)) |
| 73 | quagga_config_path = os.path.join(test_path, '..', 'setup/quagga-config') |
| 74 | onos_config_path = os.path.join(test_path, '..', 'setup/onos-config') |
| 75 | GATEWAY = '1000:10:0:0:0:0:0:164' |
| 76 | INGRESS_PORT = 1 |
| 77 | EGRESS_PORT = 2 |
| 78 | MAX_PORTS = 100 |
| 79 | peer_list = [ ('2001:0:10:0:0:0:10:1', '00:00:00:00:00:01'), ('2001:0:20:0:0:0:20:1', '00:00:00:00:02:01'), ] |
| 80 | network_list = [] |
| 81 | network_mask = 64 |
| 82 | default_routes_address = ('1001:0:10:0::/32',) |
| 83 | default_peer_address = peer_list |
| 84 | quagga_ip = os.getenv('QUAGGA_IP') |
| 85 | |
| 86 | @classmethod |
| 87 | def setUpClass(cls): |
| 88 | ''' Activate the vrouter apps''' |
| 89 | cls.olt = OltConfig() |
| 90 | cls.port_map, _ = cls.olt.olt_port_map() |
| 91 | if not cls.port_map: |
| 92 | cls.port_map = g_subscriber_port_map |
| 93 | time.sleep(3) |
| 94 | cls.load_device_id() |
| 95 | |
| 96 | @classmethod |
| 97 | def tearDownClass(cls): |
| 98 | '''Deactivate the vrouter apps''' |
| 99 | cls.vrouter_host_unload() |
| 100 | cls.start_onos(network_cfg = {}) |
| 101 | |
| 102 | @classmethod |
| 103 | def load_device_id(cls): |
| 104 | did = OnosCtrl.get_device_id() |
| 105 | cls.device_id = did |
| 106 | cls.vrouter_device_dict = { "devices" : { |
| 107 | "{}".format(did) : { |
| 108 | "basic" : { |
| 109 | "driver" : "softrouter" |
| 110 | } |
| 111 | } |
| 112 | }, |
| 113 | } |
| 114 | |
| 115 | def cliEnter(self): |
| 116 | retries = 0 |
| 117 | while retries < 3: |
| 118 | self.cli = OnosCliDriver(connect = True) |
| 119 | if self.cli.handle: |
| 120 | break |
| 121 | else: |
| 122 | retries += 1 |
| 123 | time.sleep(2) |
| 124 | |
| 125 | def cliExit(self): |
| 126 | self.cli.disconnect() |
| 127 | |
| 128 | @classmethod |
| 129 | def onos_load_config(cls, config): |
| 130 | status, code = OnosCtrl.config(config) |
| 131 | if status is False: |
| 132 | log.info('JSON request returned status %d' %code) |
| 133 | assert_equal(status, True) |
| 134 | |
| 135 | @classmethod |
| 136 | def vrouter_config_get(cls, networks = 4, peers = 1, peer_address = None, |
| 137 | route_update = None, router_address = None, specific_peer = None): |
| 138 | vrouter_configs = cls.generate_vrouter_conf(networks = networks, peers = peers,specific_peer = specific_peer, |
| 139 | peer_address = peer_address, router_address = router_address) |
| 140 | return vrouter_configs |
| 141 | |
| 142 | @classmethod |
| 143 | def host_config_load(cls, host_config = None): |
| 144 | for host in host_config: |
| 145 | status, code = OnosCtrl.host_config(host) |
| 146 | if status is False: |
| 147 | log.info('JSON request returned status %d' %code) |
| 148 | assert_equal(status, True) |
| 149 | |
| 150 | @classmethod |
| 151 | def generate_host_config(cls,hosts_list=None): |
| 152 | num = 1 |
| 153 | hosts_dict = {} |
| 154 | if hosts_list is not None: |
| 155 | hosts = hosts_list |
| 156 | else: |
| 157 | hosts = cls.peer_list |
| 158 | for host, mac in hosts: |
| 159 | port = num if num < cls.MAX_PORTS - 1 else cls.MAX_PORTS - 1 |
| 160 | hosts_dict[host] = {'mac':mac, 'vlan':'none', 'ipAddresses':[host], 'location':{ 'elementId' : '{}'.format(cls.device_id), 'port': port}} |
| 161 | num += 1 |
| 162 | return hosts_dict.values() |
| 163 | |
| 164 | |
| 165 | @classmethod |
| 166 | def vrouter_host_load(cls, peer_address = None): |
| 167 | index = 1 |
| 168 | peer_info = peer_address if peer_address is not None else cls.peer_list |
| 169 | |
| 170 | for host,_ in peer_info: |
| 171 | iface = cls.port_map[index] |
| 172 | index += 1 |
| 173 | log.info('Assigning ip %s to interface %s' %(host, iface)) |
| 174 | config_cmds = ( 'ifconfig {} 0'.format(iface), |
| 175 | 'ifconfig {0} inet6 add {1}/64'.format(iface, host), |
| 176 | 'arping -I {0} {1} -c 2'.format(iface, host), |
| 177 | ) |
| 178 | for cmd in config_cmds: |
| 179 | os.system(cmd) |
| 180 | |
| 181 | @classmethod |
| 182 | def vrouter_host_unload(cls, peer_address = None): |
| 183 | index = 1 |
| 184 | peer_info = peer_address if peer_address is not None else cls.peer_list |
| 185 | |
| 186 | for host,_ in peer_info: |
| 187 | iface = cls.port_map[index] |
| 188 | index += 1 |
| 189 | config_cmds = ('ifconfig {} 0'.format(iface), ) |
| 190 | for cmd in config_cmds: |
| 191 | os.system(cmd) |
| 192 | |
| 193 | @classmethod |
| 194 | def start_onos(cls, network_cfg = None): |
| 195 | if type(network_cfg) is tuple: |
| 196 | res = [] |
| 197 | for v in network_cfg: |
| 198 | res += v.items() |
| 199 | config = dict(res) |
| 200 | else: |
| 201 | config = network_cfg |
| 202 | log.info('Restarting ONOS with new network configuration %s'%config) |
| 203 | return cord_test_onos_restart(config = config) |
| 204 | |
| 205 | @classmethod |
| 206 | def randomipv6(cls, subnet='2001::', prefix=64): |
| 207 | random.seed() |
| 208 | ipv6_address = IPAddress(subnet) + random.getrandbits(16) |
| 209 | ipv6_network = IPNetwork(ipv6_address) |
| 210 | ipv6_network.prefixlen = prefix |
| 211 | output = '{},{}'.format(ipv6_address,ipv6_network) |
| 212 | return '{}'.format(ipv6_address),'{}'.format(ipv6_network) |
| 213 | |
| 214 | @classmethod |
| 215 | def start_quagga(cls, networks = 4, peer_address = None, router_address = None): |
| 216 | log.info('Peer address in quagga start is %s'%peer_address) |
| 217 | log.info('Restarting Quagga container with configuration for %d networks' %(networks)) |
| 218 | config = cls.generate_conf(networks = networks, peer_address = peer_address, router_address = router_address) |
| 219 | if networks <= 10000: |
| 220 | boot_delay = 25 |
| 221 | else: |
| 222 | delay_map = [60, 100, 150, 200, 300, 450, 600, 800, 1000, 1200] |
| 223 | n = min(networks/100000, len(delay_map)-1) |
| 224 | boot_delay = delay_map[n] |
| 225 | cord_test_quagga_restart(config = config, boot_delay = boot_delay) |
| 226 | |
| 227 | @classmethod |
| 228 | def generate_vrouter_conf(cls, networks = 4, peers = 1, peer_address = None, specific_peer = None,router_address = None): |
| 229 | num = 0 |
| 230 | count = 0 |
| 231 | if peer_address is None: |
| 232 | start_peer = ( 10 << 16 ) |
| 233 | end_peer = ( 9999 << 16 ) |
| 234 | else: |
| 235 | ip = peer_address[0][0] |
| 236 | start_ip = ip.split(':') |
| 237 | start_peer = ( int(start_ip[6]) << 16) |
| 238 | end_peer = ( 9999 << 16 ) |
| 239 | local_network = end_peer + 1 |
| 240 | ports_dict = { 'ports' : {} } |
| 241 | interface_list = [] |
| 242 | peer_list = [] |
| 243 | for n in xrange(start_peer, end_peer, 65536): |
| 244 | port_map = ports_dict['ports'] |
| 245 | port = num+1 if count < cls.MAX_PORTS - 1 else cls.MAX_PORTS - 1 |
| 246 | device_port_key = '{0}/{1}'.format(cls.device_id, port) |
| 247 | try: |
| 248 | interfaces = port_map[device_port_key]['interfaces'] |
| 249 | except: |
| 250 | port_map[device_port_key] = { 'interfaces' : [] } |
| 251 | interfaces = port_map[device_port_key]['interfaces'] |
| 252 | if specific_peer is None: |
| 253 | peer_ip = '2001:0:0:0:0:0:' + '%s:1'%( ( n >> 16 ) & 0xffff ) |
| 254 | else: |
| 255 | start_ip[6] = '%s'%( ( n >> 16 ) & 0xffff ) |
| 256 | start_ip[-1] = '1' |
| 257 | peer_ip = ':'.join(start_ip) |
| 258 | peer_nt = peer_ip + '/112' |
| 259 | mac = RandMAC()._fix() |
| 260 | peer_list.append((peer_ip, mac)) |
| 261 | log.info('peer ip is %s and and peer network is %s'%(peer_ip,peer_nt)) |
| 262 | if num < cls.MAX_PORTS - 1: |
| 263 | interface_dict = { 'name' : 'b1-{}'.format(port), 'ips': [peer_nt], 'mac' : mac } |
| 264 | interfaces.append(interface_dict) |
| 265 | interface_list.append(interface_dict['name']) |
| 266 | else: |
| 267 | interfaces[0]['ips'].append(peer_nt) |
| 268 | num += 1 |
| 269 | if num == peers: |
| 270 | break |
| 271 | quagga_dict = { 'apps': { 'org.onosproject.router' : { 'router' : {}, 'bgp' : { 'bgpSpeakers' : [] } } } } |
| 272 | quagga_router_dict = quagga_dict['apps']['org.onosproject.router']['router'] |
| 273 | quagga_router_dict['ospfEnabled'] = True |
| 274 | quagga_router_dict['interfaces'] = interface_list |
| 275 | quagga_router_dict['controlPlaneConnectPoint'] = '{0}/{1}'.format(cls.device_id, peers + 1) |
| 276 | |
| 277 | #bgp_speaker_dict = { 'apps': { 'org.onosproject.router' : { 'bgp' : { 'bgpSpeakers' : [] } } } } |
| 278 | bgp_speakers_list = quagga_dict['apps']['org.onosproject.router']['bgp']['bgpSpeakers'] |
| 279 | speaker_dict = {} |
| 280 | speaker_dict['name'] = 'bgp{}'.format(peers+1) |
| 281 | speaker_dict['connectPoint'] = '{0}/{1}'.format(cls.device_id, peers + 1) |
| 282 | speaker_dict['peers'] = peer_list |
| 283 | bgp_speakers_list.append(speaker_dict) |
| 284 | cls.peer_list = peer_list |
| 285 | return (cls.vrouter_device_dict, ports_dict, quagga_dict) |
| 286 | |
| 287 | |
| 288 | @classmethod |
| 289 | def generate_conf(cls, networks = 4, peer_address = None, router_address = None): |
| 290 | num = 0 |
| 291 | if router_address is None: |
| 292 | start_network = ( 10 << 16 ) |
| 293 | end_network = ( 9999 << 16 ) |
| 294 | network_mask = 112 |
| 295 | else: |
| 296 | ip = router_address |
| 297 | start_ip = ip.split(':') |
| 298 | network_mask = int(start_ip[7].split('/')[1]) |
| 299 | start_network = (int(start_ip[6]) << 16) |
| 300 | end_network = (9999 << 16) |
| 301 | net_list = [] |
| 302 | peer_list = peer_address if peer_address is not None else cls.peer_list |
| 303 | network_list = [] |
| 304 | for n in xrange(start_network, end_network, 65536): |
| 305 | if router_address is None: |
| 306 | net = '3001:0:0:0:0:0:' + '%s:0'%( ( n >> 16 ) & 0xffff ) |
| 307 | else: |
| 308 | start_ip[6] = '%s'%( ( n >> 16 ) & 0xffff ) |
| 309 | net = ':'.join((start_ip[0],start_ip[1],start_ip[2],start_ip[3],start_ip[4],start_ip[5],start_ip[6],start_ip[7][0])) |
| 310 | network_list.append(net) |
| 311 | gateway = peer_list[num % len(peer_list)][0] |
| 312 | net_route = 'ipv6 route {0}/{1} {2}'.format(net, network_mask, gateway) |
| 313 | net_list.append(net_route) |
| 314 | num += 1 |
| 315 | if num == networks: |
| 316 | break |
| 317 | cls.network_list = network_list |
| 318 | cls.network_mask = network_mask |
| 319 | zebra_routes = '\n'.join(net_list) |
| 320 | return cls.zebra_conf + zebra_routes |
| 321 | |
| 322 | @classmethod |
| 323 | def vrouter_activate(cls, deactivate = False): |
| 324 | app = 'org.onosproject.vrouter' |
| 325 | onos_ctrl = OnosCtrl(app) |
| 326 | if deactivate is True: |
| 327 | onos_ctrl.deactivate() |
| 328 | else: |
| 329 | onos_ctrl.activate() |
| 330 | time.sleep(3) |
| 331 | |
| 332 | @classmethod |
| 333 | def vrouter_configure(cls, networks = 4, peers = 1, peer_address = None,specific_peer = None, |
| 334 | route_update = None, router_address = None, time_expire = None, adding_new_routes = None): |
| 335 | vrouter_configs = cls.vrouter_config_get(networks = networks, peers = peers,specific_peer = specific_peer, |
| 336 | peer_address = peer_address, route_update = route_update) |
| 337 | cls.start_onos(network_cfg = vrouter_configs) |
| 338 | hostcfg = cls.generate_host_config() |
| 339 | cls.host_config_load(host_config = hostcfg) |
| 340 | ##Start quagga |
| 341 | cls.start_quagga(networks = networks, peer_address = peer_address, router_address = router_address) |
| 342 | return vrouter_configs |
| 343 | |
| 344 | def vrouter_port_send_recv(self, ingress, egress, dst_mac, dst_ip, positive_test = True): |
| 345 | src_mac = '00:00:00:00:00:02' |
| 346 | src_ip = '1000:11:12:13:14:15:16:17' |
| 347 | self.success = False if positive_test else True |
| 348 | timeout = 10 if positive_test else 1 |
| 349 | count = 2 if positive_test else 1 |
| 350 | self.start_sending = True |
| 351 | def recv_task(): |
| 352 | def recv_cb(pkt): |
| 353 | log.info('Pkt seen with ingress ip %s, egress ip %s' %(pkt[IP].src, pkt[IP].dst)) |
| 354 | self.success = True if positive_test else False |
| 355 | sniff(count=count, timeout=timeout, |
| 356 | lfilter = lambda p: IP in p and p[IP].dst == dst_ip and p[IP].src == src_ip, |
| 357 | prn = recv_cb, iface = self.port_map[ingress]) |
| 358 | self.start_sending = False |
| 359 | |
| 360 | t = threading.Thread(target = recv_task) |
| 361 | t.start() |
| 362 | L2 = Ether(src = src_mac, dst = dst_mac) |
| 363 | L3 = IPv6(src=src_ip,dst = dst_ip) |
| 364 | pkt = L2/L3 |
| 365 | log.info('Sending a packet with dst ip %s, dst mac %s on port %s to verify if flows are correct' % |
| 366 | (dst_ip, dst_mac, self.port_map[egress])) |
| 367 | while self.start_sending is True: |
| 368 | sendp(pkt, count=50, iface = self.port_map[egress]) |
| 369 | t.join() |
| 370 | assert_equal(self.success, True) |
| 371 | |
| 372 | def vrouter_traffic_verify(self, positive_test = True, peer_address = None): |
| 373 | if peer_address is None: |
| 374 | peers = len(self.peer_list) |
| 375 | peer_list = self.peer_list |
| 376 | else: |
| 377 | peers = len(peer_address) |
| 378 | peer_list = peer_address |
| 379 | egress = peers + 1 |
| 380 | num = 0 |
| 381 | num_hosts = 5 if positive_test else 1 |
| 382 | src_mac = '00:00:00:00:00:02' |
| 383 | src_ip = '1000:11:12:13:14:15:16:17' |
| 384 | last_bytes = [1234,8364,7360,'0af3','fdac'] |
| 385 | for network in self.network_list: |
| 386 | num_ips = num_hosts |
| 387 | octets = network.split(':') |
| 388 | for byte in last_bytes: |
| 389 | octets[-1] = str(byte) |
| 390 | dst_ip = ':'.join(octets) |
| 391 | dst_mac = peer_list[ num % peers ] [1] |
| 392 | port = (num % peers) |
| 393 | ingress = port + 1 |
| 394 | #Since peers are on the same network |
| 395 | ##Verify if flows are setup by sending traffic across |
| 396 | self.vrouter_port_send_recv(ingress, egress, dst_mac, dst_ip, positive_test = positive_test) |
| 397 | num += 1 |
| 398 | |
| 399 | def __vrouter_network_verify(self, networks, peers = 1, positive_test = True, |
| 400 | start_network = None, start_peer_address = None, route_update = None, |
| 401 | invalid_peers = None, time_expire = None, unreachable_route_traffic = None, |
| 402 | deactivate_activate_vrouter = None, adding_new_routes = None, |
| 403 | specific_peer = None): |
| 404 | |
| 405 | _, ports_map, egress_map = self.vrouter_configure(networks = networks, peers = peers, |
| 406 | peer_address = start_peer_address, |
| 407 | route_update = route_update, |
| 408 | router_address = start_network, |
| 409 | time_expire = time_expire, |
| 410 | adding_new_routes = adding_new_routes, |
| 411 | specific_peer = specific_peer) |
| 412 | if self.network_list > 50: |
| 413 | wait = len(self.network_list)/20 |
| 414 | time.sleep(wait) |
| 415 | log.info('waiting for %d seconds to verify routes in ONOS'%wait) |
| 416 | else: |
| 417 | time.sleep(5) |
| 418 | self.cliEnter() |
| 419 | routes = json.loads(self.cli.routes(jsonFormat = True)) |
| 420 | assert_equal(len(routes['routes6']), networks) |
| 421 | if invalid_peers is None: |
| 422 | self.vrouter_traffic_verify() |
| 423 | if time_expire is True: |
| 424 | self.start_quagga(networks = networks, peer_address = start_peer_address, router_address = '12.10.10.1/24') |
| 425 | self.vrouter_traffic_verify() |
| 426 | if unreachable_route_traffic is True: |
| 427 | network_list_backup = self.network_list |
| 428 | self.network_list = ['1:1:1:1:1:1:1:1','2:2:2:2:2:2:2:2','3:3:3:3:3:3:3:3','4:4:4:4:4:4:4:4'] |
| 429 | self.vrouter_traffic_verify(positive_test = False) |
| 430 | self.network_list = network_list_backup |
| 431 | if deactivate_activate_vrouter is True: |
| 432 | log.info('Deactivating vrouter app in ONOS controller for negative scenario') |
| 433 | self.vrouter_activate(deactivate = True) |
| 434 | #routes = json.loads(self.cli.routes(jsonFormat = False, cmd_exist = False)) |
| 435 | #assert_equal(len(routes['routes4']), 'Command not found') |
| 436 | log.info('Activating vrouter app again in ONOS controller for negative scenario') |
| 437 | self.vrouter_activate(deactivate = False) |
| 438 | if self.network_list > 50: |
| 439 | wait = len(self.network_list)/20 |
| 440 | time.sleep(wait) |
| 441 | log.info('waiting for %d seconds to verify routes in ONOS'%wait) |
| 442 | else: |
| 443 | time.sleep(5) |
| 444 | routes = json.loads(self.cli.routes(jsonFormat = True)) |
| 445 | assert_equal(len(routes['routes4']), networks) |
| 446 | self.vrouter_traffic_verify() |
| 447 | self.cliExit() |
| 448 | return True |
| 449 | |
| 450 | def __vrouter_network_verify_negative(self, networks, peers = 1): |
| 451 | ##Stop quagga. Test traffic again to see if flows were removed |
| 452 | log.info('Stopping Quagga container') |
| 453 | cord_test_quagga_stop() |
| 454 | self.vrouter_traffic_verify(positive_test = False) |
| 455 | log.info('OVS flows have been removed successfully after Quagga was stopped') |
| 456 | self.start_quagga(networks = networks) |
| 457 | self.vrouter_traffic_verify() |
| 458 | log.info('OVS flows have been successfully reinstalled after Quagga was restarted') |
| 459 | |
| 460 | def quagga_shell(self, cmd): |
| 461 | shell_cmds = ('vtysh', '"conf t"', '"{}"'.format(cmd)) |
| 462 | quagga_cmd = ' -c '.join(shell_cmds) |
| 463 | return cord_test_quagga_shell(quagga_cmd) |
| 464 | |
| 465 | def test_vrouter_ipv6_with_5_routes(self): |
| 466 | res = self.__vrouter_network_verify(5, peers = 1) |
| 467 | assert_equal(res, True) |
| 468 | |
| 469 | def test_vrouter_ipv6_with_5_routes_quagga_restart_without_config(self): |
| 470 | res = self.__vrouter_network_verify(5, peers = 1) |
| 471 | assert_equal(res, True) |
| 472 | log.info('Restart Quagga container without config retain') |
| 473 | cord_test_quagga_restart() |
| 474 | self.vrouter_traffic_verify(positive_test = False) |
| 475 | |
| 476 | def test_vrouter_ipv6_with_5_routes_quagga_restart_with_config(self): |
| 477 | res = self.__vrouter_network_verify(5, peers = 1) |
| 478 | assert_equal(res, True) |
| 479 | log.info('verifying vrouter traffic after Quagga restart with config retain') |
| 480 | #cord_test_quagga_restart() |
| 481 | self.start_quagga(networks=5) |
| 482 | self.vrouter_traffic_verify(positive_test = True) |
| 483 | |
| 484 | def test_vrouter_ipv6_with_5_routes_quagga_stop(self): |
| 485 | res = self.__vrouter_network_verify(5, peers = 1) |
| 486 | assert_equal(res, True) |
| 487 | log.info('verifying vrouter traffic after Quagga stop') |
| 488 | cord_test_quagga_stop() |
| 489 | self.vrouter_traffic_verify(positive_test = False) |
| 490 | |
| 491 | def test_vrouter_ipv6_with_5_routes_quagga_stop_and_start(self): |
| 492 | res = self.__vrouter_network_verify(5, peers = 1) |
| 493 | assert_equal(res, True) |
| 494 | log.info('verifying vrouter traffic after Quagga stop and start again') |
| 495 | cord_test_quagga_stop() |
| 496 | self.vrouter_traffic_verify(positive_test = False) |
| 497 | self.start_quagga(networks=5) |
| 498 | self.vrouter_traffic_verify(positive_test = True) |
| 499 | |
| 500 | def test_vrouter_ipv6_with_5_routes_onos_restart_without_config(self): |
| 501 | res = self.__vrouter_network_verify(5, peers = 1) |
| 502 | assert_equal(res, True) |
| 503 | log.info('verifying vrouter traffic after ONOS restart without config retain') |
| 504 | cord_test_onos_restart() |
| 505 | self.vrouter_traffic_verify(positive_test = False) |
| 506 | |
| 507 | def test_vrouter_ipv6_with_5_routes_onos_restart_with_config(self): |
| 508 | res = self.__vrouter_network_verify(5, peers = 1) |
| 509 | assert_equal(res, True) |
| 510 | log.info('verifying vrouter traffic after ONOS restart with config retain') |
| 511 | vrouter_configs = self.vrouter_config_get(networks = 5, peers = 1, |
| 512 | peer_address = None, route_update = None) |
| 513 | self.start_onos(network_cfg=vrouter_configs) |
| 514 | mac = RandMAC()._fix() |
| 515 | hostcfg = self.generate_host_config(hosts_list = [('2001:0:0:0:0:0:10:1',mac)]) |
| 516 | self.host_config_load(host_config = hostcfg) |
| 517 | time.sleep(10) |
| 518 | self.vrouter_traffic_verify(positive_test = True) |
| 519 | |
| 520 | def test_vrouter_ipv6_with_5_routes_restart_quagga_and_onos_with_config(self): |
| 521 | res = self.__vrouter_network_verify(5, peers = 1) |
| 522 | assert_equal(res, True) |
| 523 | log.info('verifying vrouter traffic after Quagga and ONOS restart with config retain') |
| 524 | #cord_test_quagga_restart() |
| 525 | self.start_quagga(networks=5) |
| 526 | vrouter_configs = self.vrouter_config_get(networks = 5, peers = 1, |
| 527 | peer_address = None, route_update = None) |
| 528 | self.start_onos(network_cfg = vrouter_configs) |
| 529 | mac = RandMAC()._fix() |
| 530 | hostcfg = self.generate_host_config(hosts_list = [('2001:0:0:0:0:0:10:1',mac)]) |
| 531 | self.host_config_load(host_config = hostcfg) |
| 532 | time.sleep(10) |
| 533 | self.vrouter_traffic_verify(positive_test = True) |
| 534 | |
| 535 | def test_vrouter_ipv6_with_5_routes_2_peers(self): |
| 536 | res = self.__vrouter_network_verify(5, peers = 2) |
| 537 | assert_equal(res, True) |
| 538 | |
| 539 | def test_vrouter_ipv6_with_6_routes_3_peers(self): |
| 540 | res = self.__vrouter_network_verify(6, peers = 3) |
| 541 | assert_equal(res, True) |
| 542 | |
| 543 | def test_vrouter_ipv6_with_50_routes(self): |
| 544 | res = self.__vrouter_network_verify(50, peers = 1) |
| 545 | assert_equal(res, True) |
| 546 | |
| 547 | def test_vrouter_ipv6_with_50_routes_5_peers(self): |
| 548 | res = self.__vrouter_network_verify(50, peers = 5) |
| 549 | assert_equal(res, True) |
| 550 | |
| 551 | def test_vrouter_ipv6_with_100_routes(self): |
| 552 | res = self.__vrouter_network_verify(100, peers = 1) |
| 553 | assert_equal(res, True) |
| 554 | |
| 555 | def test_vrouter_ipv6_with_100_routes_10_peers(self): |
| 556 | res = self.__vrouter_network_verify(100, peers = 10) |
| 557 | assert_equal(res, True) |
| 558 | |
| 559 | def test_vrouter_ipv6_with_300_routes(self): |
| 560 | res = self.__vrouter_network_verify(300, peers = 1) |
| 561 | assert_equal(res, True) |
| 562 | |
| 563 | def test_vrouter_ipv6_with_1k_routes(self): |
| 564 | res = self.__vrouter_network_verify(1000, peers = 1) |
| 565 | assert_equal(res, True) |
| 566 | |
| 567 | def test_vrouter_ipv6_with_9k_routes(self): |
| 568 | res = self.__vrouter_network_verify(9000, peers = 1) |
| 569 | assert_equal(res, True) |
| 570 | |
| 571 | @nottest # Need to implement logic for generating more than 10000 routes |
| 572 | def test_vrouter_ipv6_with_100000_routes(self): |
| 573 | res = self.__vrouter_network_verify(100000, peers = 1) |
| 574 | assert_equal(res, True) |
| 575 | |
| 576 | @nottest # Need to implement logic for generating more than 10000 routes |
| 577 | def test_vrouter_ipv6_with_1000000_routes(self): |
| 578 | res = self.__vrouter_network_verify(1000000, peers = 1) |
| 579 | assert_equal(res, True) |
| 580 | |
| 581 | def test_vrouter_ipv6_with_route_update(self): |
| 582 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True) |
| 583 | assert_equal(res, True) |
| 584 | peer_info = [('2001:0:0:0:0:0:72:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:73:1', '00:00:00:00:02:01')] |
| 585 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, |
| 586 | start_peer_address = peer_info, route_update = True) |
| 587 | assert_equal(res, True) |
| 588 | |
| 589 | def test_vrouter_ipv6_with_64bit_mask_route_update(self): |
| 590 | router_address = '3001:0:0:0:0:0:56:0/64' |
| 591 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_network = router_address) |
| 592 | assert_equal(res, True) |
| 593 | |
| 594 | def test_vrouter_ipv6_with_32bit_route_update(self): |
| 595 | router_address = '3112:90c4:836a:7e56:0:0:06:0/32' |
| 596 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_network = router_address) |
| 597 | assert_equal(res, True) |
| 598 | |
| 599 | def test_vrouter_ipv6_with_16bit_route_update(self): |
| 600 | router_address = '9961:9474:0:8472:f30a:0:06:0/16' |
| 601 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True,start_network = router_address) |
| 602 | assert_equal(res, True) |
| 603 | |
| 604 | def test_vrouter_ipv6_with_48bit_route_update(self): |
| 605 | router_address = 'c34a:9737:14cd:8730:0:0:06:0/48' |
| 606 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_network = router_address) |
| 607 | assert_equal(res, True) |
| 608 | |
| 609 | def test_vrouter_ipv6_with_classless_route_update(self): |
| 610 | router_address = '3001:430d:76cb:f56e:873:0:677:0/67' |
| 611 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_network = router_address) |
| 612 | assert_equal(res, True) |
| 613 | |
| 614 | def test_vrouter_ipv6_with_classless_duplicate_route_update(self): |
| 615 | router_address = '3001:8730:732:723:0:0:677:0/116' |
| 616 | res = self.__vrouter_network_verify(5, peers = 1, positive_test = True, start_network = router_address) |
| 617 | assert_equal(res, True) |
| 618 | |
| 619 | def test_vrouter_ipv6_with_invalid_peers(self): |
| 620 | peer_info = [('FE80:0:0:0:C800:27FF:10:8', '00:00:00:00:01:01'), ('FE80:0:0:0:C800:27FF:11:8', '00:00:00:00:02:01')] |
| 621 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, |
| 622 | start_peer_address = peer_info, specific_peer=True,invalid_peers= True) |
| 623 | assert_equal(res, True) |
| 624 | |
| 625 | @nottest |
| 626 | def test_vrouter_with_traffic_sent_between_peers_connected_to_onos(self): |
| 627 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, traffic_running_between_peers = True) |
| 628 | assert_equal(res, True) |
| 629 | |
| 630 | @nottest |
| 631 | def test_vrouter_with_routes_time_expire(self): |
| 632 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, time_expire = True) |
| 633 | assert_equal(res, True) |
| 634 | |
| 635 | def test_vrouter_ipv6_with_unreachable_route(self): |
| 636 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, unreachable_route_traffic = True) |
| 637 | assert_equal(res, True) |
| 638 | |
| 639 | @nottest |
| 640 | def test_vrouter_ipv6_with_enabling_disabling_vrouter_app(self): |
| 641 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True, deactivate_activate_vrouter = True) |
| 642 | assert_equal(res, True) |
| 643 | |
| 644 | def test_vrouter_ipv6_with_adding_new_routes_in_routing_table(self): |
| 645 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True) |
| 646 | cmd = 'ipv6 route 4001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:10:1' |
| 647 | self.quagga_shell(cmd) |
| 648 | self.vrouter_traffic_verify() |
| 649 | self.network_list = [ '4001:0:0:0:0:0:677:0' ] |
| 650 | self.network_mask = 64 |
| 651 | self.vrouter_traffic_verify() |
| 652 | assert_equal(res, True) |
| 653 | |
| 654 | def test_vrouter_ipv6_with_adding_new_routes_in_quagga_routing_table_and_restart(self): |
| 655 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True) |
| 656 | cmd = 'ipv6 route 4001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:10:1' |
| 657 | self.quagga_shell(cmd) |
| 658 | self.vrouter_traffic_verify() |
| 659 | self.network_list = [ '4001:0:0:0:0:0:677:0' ] |
| 660 | self.network_mask = 64 |
| 661 | self.vrouter_traffic_verify() |
| 662 | log.info('verifying vrouter traffic for added routes after Quagga restart with old config only retain') |
| 663 | #cord_test_quagga_restart() |
| 664 | self.start_quagga(networks=5) |
| 665 | self.vrouter_traffic_verify(positive_test = False) |
| 666 | assert_equal(res, True) |
| 667 | |
| 668 | def test_vrouter_ipv6_with_removing_old_routes_in_routing_table(self): |
| 669 | res = self.__vrouter_network_verify(5, peers = 2, positive_test = True) |
| 670 | cmd = 'ipv6 route 4001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:10:1' |
| 671 | self.quagga_shell(cmd) |
| 672 | self.vrouter_traffic_verify() |
| 673 | old_network_list = self.network_list |
| 674 | old_network_mask = self.network_mask |
| 675 | self.network_list = [ '4001:0:0:0:0:0:677:0' ] |
| 676 | self.network_mask = 64 |
| 677 | self.vrouter_traffic_verify() |
| 678 | assert_equal(res, True) |
| 679 | cmd = 'no ipv6 route 4001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:10:1' |
| 680 | self.quagga_shell(cmd) |
| 681 | time.sleep(5) |
| 682 | self.vrouter_traffic_verify(positive_test = False) |
| 683 | self.network_mask = old_network_mask |
| 684 | self.network_list = old_network_list |
| 685 | self.vrouter_traffic_verify(positive_test = True) |
| 686 | |
| 687 | def test_vrouter_ipv6_modifying_nexthop_route_in_routing_table(self): |
| 688 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 689 | router_address = '3001:0:0:0:0:0:677:0/112' |
| 690 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, |
| 691 | start_peer_address = peer_info, start_network = router_address) |
| 692 | cmd = 'no ipv6 route 3001:0:0:0:0:0:677:0/112 2001:0:0:0:0:0:18:1' |
| 693 | self.quagga_shell(cmd) |
| 694 | self.vrouter_traffic_verify(positive_test = True) |
| 695 | assert_equal(res, True) |
| 696 | |
| 697 | |
| 698 | def test_vrouter_ipv6_deleting_alternative_nexthop_in_routing_table(self): |
| 699 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 700 | router_address = '3001:0:0:0:0:0:677:0/112' |
| 701 | res = self.__vrouter_network_verify(1, peers = 2, positive_test = True, |
| 702 | start_peer_address = peer_info, start_network = router_address) |
| 703 | cmd = 'no ipv6 route 3001:0:0:0:0:0:677:0/112 2001:0:0:0:0:0:12:1' |
| 704 | self.quagga_shell(cmd) |
| 705 | time.sleep(5) |
| 706 | self.vrouter_traffic_verify(positive_test = False) |
| 707 | assert_equal(res, True) |
| 708 | |
| 709 | def test_vrouter_ipv6_deleting_some_routes_in_routing_table(self): |
| 710 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 711 | router_address = '3001:0:0:0:0:0:677:0/112' |
| 712 | res = self.__vrouter_network_verify(10, peers = 2, positive_test = True, |
| 713 | start_peer_address = peer_info, start_network = router_address) |
| 714 | cmd = 'no ipv6 route 3001:0:0:0:0:0:677:0/112 2001:0:0:0:0:0:12:1' |
| 715 | self.quagga_shell(cmd) |
| 716 | cmd = 'no ipv6 route 3001:0:0:0:0:0:678:0/112 2001:0:0:0:0:0:13:1' |
| 717 | self.quagga_shell(cmd) |
| 718 | cmd = 'no ipv6 route 3001:0:0:0:0:0:679:0/112 2001:0:0:0:0:0:12:1' |
| 719 | self.quagga_shell(cmd) |
| 720 | self.vrouter_traffic_verify(positive_test = True) |
| 721 | assert_equal(res, True) |
| 722 | |
| 723 | def test_vrouter_ipv6_deleting_some_routes_in_quagga_routing_table_and_restart(self): |
| 724 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 725 | router_address = '3001:0:0:0:0:0:677:0/112' |
| 726 | res = self.__vrouter_network_verify(10, peers = 2, positive_test = True, |
| 727 | start_peer_address = peer_info, start_network = router_address) |
| 728 | cmd = 'no ipv6 route 3001:0:0:0:0:0:677:0/112 2001:0:0:0:0:0:12:1' |
| 729 | self.quagga_shell(cmd) |
| 730 | cmd = 'no ipv6 route 3001:0:0:0:0:0:678:0/112 2001:0:0:0:0:0:13:1' |
| 731 | self.quagga_shell(cmd) |
| 732 | cmd = 'no ipv6 route 3001:0:0:0:0:0:679:0/112 2001:0:0:0:0:0:12:1' |
| 733 | self.quagga_shell(cmd) |
| 734 | self.network_list = [ '3001:0:0:0:0:0:677:0','3001:0:0:0:0:0:678:0','3001:0:0:0:0:0:679:0' ] |
| 735 | self.network_mask = 112 |
| 736 | self.vrouter_traffic_verify(positive_test = False) |
| 737 | self.network_list = [ '3001:0:0:0:0:0:680:0','3001:0:0:0:0:0:681:0' ] |
| 738 | self.vrouter_traffic_verify(positive_test = True) |
| 739 | #cord_test_quagga_restart() |
| 740 | self.start_quagga(networks=10) |
| 741 | self.network_list = [ '3001:0:0:0:0:0:677:0','3001:0:0:0:0:0:681:0' ] |
| 742 | self.vrouter_traffic_verify(positive_test = True) |
| 743 | assert_equal(res, True) |
| 744 | |
| 745 | |
| 746 | def test_vrouter_ipv6_deleting_and_adding_routes_in_routing_table(self): |
| 747 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 748 | router_address = '3001:0:0:0:0:0:677:0/64' |
| 749 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_peer_address = peer_info, start_network = router_address) |
| 750 | cmd = 'no ipv6 route 3001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:12:1' |
| 751 | self.quagga_shell(cmd) |
| 752 | cmd = 'ipv6 route 3001:0:0:0:0:0:677:0/64 2001:0:0:0:0:0:12:1' |
| 753 | self.quagga_shell(cmd) |
| 754 | self.vrouter_traffic_verify(positive_test = True) |
| 755 | assert_equal(res, True) |
| 756 | |
| 757 | def test_vrouter_ipv6_toggling_nexthop_interface(self): |
| 758 | peer_info = [('2001:0:0:0:0:0:12:1', '00:00:00:00:01:01'), ('2001:0:0:0:0:0:13:1', '00:00:00:00:02:01')] |
| 759 | router_address = '3001:0:0:0:0:0:677:0/64' |
| 760 | res = self.__vrouter_network_verify(1, peers = 1, positive_test = True, start_peer_address = peer_info, start_network = router_address) |
| 761 | iface = self.port_map[1] |
| 762 | #toggle the interface to trigger host removal. |
| 763 | cmds = ('ifconfig {} down'.format(iface), |
| 764 | 'sleep 2', |
| 765 | 'ifconfig {} 0'.format(iface),) |
| 766 | for cmd in cmds: |
| 767 | os.system(cmd) |
| 768 | self.vrouter_traffic_verify(positive_test = False) |
| 769 | host = "2001:0:0:0:0:0:12:1" |
| 770 | cmd = 'ifconfig {0} {1} up'.format(iface, host) |
| 771 | os.system(cmd) |
| 772 | #wait for arp refresh |
| 773 | time.sleep(60) |
| 774 | self.vrouter_traffic_verify(positive_test = True) |
| 775 | assert_equal(res, True) |
| 776 | |