blob: c1882b0c9ab6a6195f51d0b5d3afbd01b42eadb4 [file] [log] [blame]
# Deployment configuration for a phyical hardware POD
---
seedServer:
ip: '10.90.0.251'
# User name and password used by Ansible to connect to the host for remote
# provisioning. These default values are used for automated testing, change
# with care.
user: 'cord'
password: 'cord'
# Network address information for the head node:
#
# fabric_ip - the IP address and mask bits to be used to configure the network
# interface connected to the leaf - spine fabric
#
# management_ip - the IP address and mask bits to be used to configure the network
# interface connecting the head node to the POD internal
# management network. The head node will deliver DHCP addresses to
# the other compute nodes over this interface
#
# external_ip - the IP address and mask bits to be used to configure the network
# interface connecting the head node (and the POD) to the
# Internet. All traffic in the POD to external hosts will be
# NAT-ed through this interface
fabric_ip: '10.6.1.1/24'
management_ip: '10.6.0.1/24'
external_ip: '10.90.0.251/16'
external_iface: 'eth0'
external_gw: '10.90.0.1'
skipTags:
docker:
imageVersion: candidate
otherNodes:
# Experimental
#
# Specifies the subnet and address range that will be used to allocate IP addresses
# to the compute nodes as they are deployed into the POD.
fabric:
network: 10.6.1.1/24
range_low: 10.6.1.2
range_high: 10.6.1.253