blob: eb6feb2be34b4d63cb2547ce666109554ed32084 [file] [log] [blame]
syntax = "proto3";
option go_package = "github.com/opencord/device-management-interface/v3/go/dmi";
package dmi;
import "google/protobuf/timestamp.proto";
// The model used to represent a HW is based on RFC8348 (https://tools.ietf.org/html/rfc8348)
message Uuid {
string uuid = 1;
}
message HardwareID {
Uuid uuid = 1;
}
message Uri {
string uri = 1;
}
enum ComponentType {
COMPONENT_TYPE_UNDEFINED = 0;
COMPONENT_TYPE_UNKNOWN = 1;
COMPONENT_TYPE_CHASSIS = 2;
COMPONENT_TYPE_BACKPLANE = 3;
COMPONENT_TYPE_CONTAINER = 4;
COMPONENT_TYPE_POWER_SUPPLY = 5;
COMPONENT_TYPE_FAN = 6;
COMPONENT_TYPE_SENSOR = 7;
COMPONENT_TYPE_MODULE = 8;
COMPONENT_TYPE_PORT = 9;
COMPONENT_TYPE_CPU = 10;
COMPONENT_TYPE_BATTERY = 11;
COMPONENT_TYPE_STORAGE = 12;
COMPONENT_TYPE_MEMORY = 13;
// A component of type "TRANSCEIVER" could have 0 or more components of type "PORT" as children.
COMPONENT_TYPE_TRANSCEIVER = 14;
}
enum ComponentAdminState {
COMP_ADMIN_STATE_UNDEFINED = 0;
COMP_ADMIN_STATE_UNKNOWN = 1;
COMP_ADMIN_STATE_LOCKED = 2;
COMP_ADMIN_STATE_SHUTTING_DOWN = 3;
COMP_ADMIN_STATE_UNLOCKED = 4;
}
enum ComponentOperState {
COMP_OPER_STATE_UNDEFINED = 0;
COMP_OPER_STATE_UNKNOWN = 1;
COMP_OPER_STATE_DISABLED = 2;
COMP_OPER_STATE_ENABLED = 3;
COMP_OPER_STATE_TESTING = 4;
}
enum ComponentUsageState {
COMP_USAGE_STATE_UNDEFINED = 0;
COMP_USAGE_STATE_UNKNOWN = 1;
COMP_USAGE_STATE_IDLE = 2;
COMP_USAGE_STATE_ACTIVE = 3;
COMP_USAGE_STATE_BUSY = 4;
}
enum ComponentAlarmState {
COMP_ALARM_STATE_UNDEFINED = 0;
COMP_ALARM_STATE_UNKNOWN = 1;
COMP_ALARM_STATE_UNDER_REPAIR= 2;
COMP_ALARM_STATE_CRITICAL = 3;
COMP_ALARM_STATE_MAJOR = 4;
COMP_ALARM_STATE_MINOR = 5;
COMP_ALARM_STATE_WARNING = 6;
COMP_ALARM_STATE_INDETERMINATE = 7;
}
enum ComponentStandbyState {
COMP_STANDBY_STATE_UNDEFINED = 0;
COMP_STANDBY_STATE_UNKNOWN = 1;
COMP_STANDBY_STATE_HOT = 2;
COMP_STANDBY_STATE_COLD = 3;
COMP_STANDBY_STATE_PROVIDING_SERVICE = 4;
}
message ComponentState {
google.protobuf.Timestamp state_last_changed = 1;
ComponentAdminState admin_state = 2;
ComponentOperState oper_state = 3;
ComponentUsageState usage_state = 4;
ComponentAlarmState alarm_state = 5;
ComponentStandbyState standby_state = 6;
}
enum DataValueType {
VALUE_TYPE_UNDEFINED = 0;
VALUE_TYPE_OTHER = 1;
VALUE_TYPE_UNKNOWN = 2;
VALUE_TYPE_VOLTS_AC = 3;
VALUE_TYPE_VOLTS_DC = 4;
VALUE_TYPE_AMPERES = 5;
VALUE_TYPE_WATTS = 6;
VALUE_TYPE_HERTZ = 7;
VALUE_TYPE_CELSIUS = 8;
VALUE_TYPE_PERCENT_RH = 9;
VALUE_TYPE_RPM = 10;
VALUE_TYPE_CMM = 11;
VALUE_TYPE_TRUTH_VALUE = 12;
VALUE_TYPE_PERCENT = 13;
VALUE_TYPE_METERS = 14;
VALUE_TYPE_BYTES = 15;
}
enum ValueScale {
VALUE_SCALE_UNDEFINED = 0;
VALUE_SCALE_YOCTO = 1;
VALUE_SCALE_ZEPTO = 2;
VALUE_SCALE_ATTO = 3;
VALUE_SCALE_FEMTO = 4;
VALUE_SCALE_PICO = 5;
VALUE_SCALE_NANO = 6;
VALUE_SCALE_MICRO = 7;
VALUE_SCALE_MILLI = 8;
VALUE_SCALE_UNITS = 9;
VALUE_SCALE_KILO = 10;
VALUE_SCALE_MEGA = 11;
VALUE_SCALE_GIGA = 12;
VALUE_SCALE_TERA = 13;
VALUE_SCALE_PETA = 14;
VALUE_SCALE_EXA = 15;
VALUE_SCALE_ZETTA = 16;
VALUE_SCALE_YOTTA =17;
}
enum SensorStatus {
SENSOR_STATUS_UNDEFINED = 0;
SENSOR_STATUS_OK = 1;
SENSOR_STATUS_UNAVAILABLE = 2;
SENSOR_STATUS_NONOPERATIONAL = 3;
}
message ComponentSensorData {
int32 value = 1;
DataValueType type = 2;
ValueScale scale = 3;
int32 precision = 4;
SensorStatus status = 5;
string units_display = 6;
google.protobuf.Timestamp timestamp = 7;
uint32 value_update_rate = 8;
// data_type can be of the string representation of MetricNames or something else as well
string data_type = 9;
}
message PortComponentAttributes{
enum ConnectorType {
CONNECTOR_TYPE_UNDEFINED = 0;
RJ45 = 1;
FIBER_LC = 2;
FIBER_SC_PC = 3;
FIBER_MPO = 4;
RS232 = 5;
}
enum Speed {
SPEED_UNDEFINED = 0;
DYNAMIC = 1;
GIGABIT_1 = 2;
GIGABIT_10 = 3;
GIGABIT_25 = 4;
GIGABIT_40 = 5;
GIGABIT_100 = 6;
GIGABIT_400 = 7;
MEGABIT_2500 = 8;
MEGABIT_1250 = 9;
}
enum Protocol {
PROTOCOL_UNDEFINED = 0;
ETHERNET = 1;
GPON = 2;
XGPON = 3;
XGSPON = 4;
GFAST = 5;
SERIAL = 6;
EPON = 7;
BITS = 8;
}
ConnectorType connector_type = 1;
Speed speed = 2;
Protocol protocol = 3;
string physical_label = 4;
// The mapping_label can be used to map ports between the DMI interface and other systems like VOLTHA
// The value of the mapping_label should be exactly the same as generated for the same port by the other
// system
string mapping_label = 5;
PonIdConfig pon_id_config = 6;
bool speed_autonegotiation = 7; //Only valid for ethernet type port components. True if enabled, false otherwise.
}
message PortComponentChangeAttributes {
PonIdConfig pon_id_config = 1;
}
message PonIdConfig {
// The pon_id and pon_id_transmit_periodicity attributes are valid only for ports of type GPON, XGPON and XGSPON
// For GPON pon_id is a 7 byte value
// For XGS-PON, it's a 32 bit value, should be encoded in the first 4 bytes of pon_id in network byte order
bytes pon_id = 1;
uint32 pon_id_transmit_periodicity = 2; // The value is in seconds and defaults to 1 second
}
message ContainerComponentAttributes{
string physical_label = 1;
}
message PsuComponentAttributes{
enum SupportedVoltage {
SUPPORTED_VOLTAGE_UNDEFINED = 0;
V48 = 1;
V230 = 2;
V115 = 3;
}
SupportedVoltage supported_voltage = 1;
}
message TransceiverComponentsAttributes{
enum FormFactor {
FORM_FACTOR_UNKNOWN = 0;
QSFP = 1;
QSFP_PLUS = 2;
QSFP28 = 3;
SFP = 4;
SFP_PLUS = 5;
XFP = 6;
CFP4 = 7;
CFP2 = 8;
CPAK = 9;
X2 = 10;
OTHER = 11;
CFP = 12;
CFP2_ACO = 13;
CFP2_DCO = 14;
}
enum Type {
TYPE_UNKNOWN = 0;
ETHERNET = 1;
GPON = 2;
XGPON = 3;
XGSPON = 4;
CPON = 5;
NG_PON2 = 6;
EPON = 7;
}
FormFactor form_factor = 1;
Type trans_type = 2;
// The maximum reach that can be achieved by this transceiver
uint32 max_distance = 3;
ValueScale max_distance_scale = 4;
// The receive and transmit wavelengths that the transeiver operates on
repeated uint32 rx_wavelength = 5;
repeated uint32 tx_wavelength = 6;
ValueScale wavelength_scale = 7;
}
message Component {
// The name of a component uniquely identifies a component within the hardware
string name = 1;
ComponentType class = 2;
string description = 3;
// The name of the parent of this component, empty string("") in case of the root component
string parent = 4;
int32 parent_rel_pos = 5;
repeated Component children = 6;
string hardware_rev = 7;
string firmware_rev = 8;
string software_rev = 9;
string serial_num = 10;
string mfg_name = 11;
// Apart from the definition of this attribute as defined in RFC 8348, implementations could choose to carry
// the manufacturer's part number in this attribute.
string model_name = 12;
string alias = 13;
string asset_id = 14;
bool is_fru = 15;
google.protobuf.Timestamp mfg_date = 16;
Uri uri = 17;
// The uuid of the component uniquely identifies the component across the entire system
Uuid uuid= 18;
ComponentState state = 19;
repeated ComponentSensorData sensor_data = 20;
// The attribute 'specific' can be populated for components where more details are required by the users of the DMI interface
oneof specific {
PortComponentAttributes port_attr = 50;
ContainerComponentAttributes container_attr = 51;
PsuComponentAttributes psu_attr = 52;
TransceiverComponentsAttributes transceiver_attr = 53;
}
}
message Hardware {
google.protobuf.Timestamp last_change = 1;
// Each HW has one parent/root and all other components are children of this
// The class of the root component would be set as UNDEFINED
Component root = 2;
// TODO: Authentication?
// Timestamp at which the hardware last booted
google.protobuf.Timestamp last_booted = 3;
}
// The attributes of a component which are modifiable from the client side
message ModifiableComponent {
// The name has to be unique for each component within the hardware and implementations need to
// ascertain this when modifying the name
string name = 1;
ComponentType class = 2;
Component parent = 3;
int32 parent_rel_pos = 4;
string alias = 5;
string asset_id = 6;
Uri uri = 7;
ComponentAdminState admin_state = 8;
// The attribute 'specific' can be populated for specific class of components
oneof specific {
PortComponentChangeAttributes port_attr = 50;
}
}