syntax = "proto3"; | |
option go_package = "github.com/opencord/device-management-interface/v3/go/dmi"; | |
package dmi; | |
import "dmi/commons.proto"; | |
import "dmi/hw.proto"; | |
import "google/protobuf/timestamp.proto"; | |
import "google/protobuf/empty.proto"; | |
// Management of Events and protos for encoding of Events | |
enum EventIds { | |
EVENT_NAME_UNDEFINED = 0; | |
// Events from the Transceivers | |
EVENT_TRANSCEIVER_PLUG_OUT = 100; | |
EVENT_TRANSCEIVER_PLUG_IN = 101; | |
EVENT_TRANSCEIVER_VOLTAGE_ABOVE_THRESHOLD = 102; | |
EVENT_TRANSCEIVER_VOLTAGE_BELOW_THRESHOLD = 103; | |
EVENT_TRANSCEIVER_TEMPERATURE_ABOVE_THRESHOLD = 104; | |
EVENT_TRANSCEIVER_TEMPERATURE_BELOW_THRESHOLD = 105; | |
EVENT_TRANSCEIVER_CURRENT_ABOVE_THRESHOLD = 106; | |
EVENT_TRANSCEIVER_CURRENT_BELOW_THRESHOLD = 107; | |
EVENT_TRANSCEIVER_RX_POWER_ABOVE_THRESHOLD = 108; | |
EVENT_TRANSCEIVER_RX_POWER_BELOW_THRESHOLD = 109; | |
EVENT_TRANSCEIVER_TX_POWER_ABOVE_THRESHOLD = 110; | |
EVENT_TRANSCEIVER_TX_POWER_BELOW_THRESHOLD = 111; | |
EVENT_TRANSCEIVER_FAILURE = 112; | |
EVENT_TRANSCEIVER_VOLTAGE_ABOVE_THRESHOLD_RECOVERED = 113; | |
EVENT_TRANSCEIVER_VOLTAGE_BELOW_THRESHOLD_RECOVERED = 114; | |
EVENT_TRANSCEIVER_TEMPERATURE_ABOVE_THRESHOLD_RECOVERED = 115; | |
EVENT_TRANSCEIVER_TEMPERATURE_BELOW_THRESHOLD_RECOVERED = 116; | |
EVENT_TRANSCEIVER_CURRENT_ABOVE_THRESHOLD_RECOVERED = 117; | |
EVENT_TRANSCEIVER_CURRENT_BELOW_THRESHOLD_RECOVERED = 118; | |
EVENT_TRANSCEIVER_RX_POWER_ABOVE_THRESHOLD_RECOVERED = 119; | |
EVENT_TRANSCEIVER_RX_POWER_BELOW_THRESHOLD_RECOVERED = 120; | |
EVENT_TRANSCEIVER_TX_POWER_ABOVE_THRESHOLD_RECOVERED = 121; | |
EVENT_TRANSCEIVER_TX_POWER_BELOW_THRESHOLD_RECOVERED = 122; | |
EVENT_TRANSCEIVER_FAILURE_RECOVERED = 123; | |
// Events from the PSU | |
EVENT_PSU_PLUG_OUT = 200; | |
EVENT_PSU_PLUG_IN = 201; | |
EVENT_PSU_FAILURE = 202; | |
EVENT_PSU_FAILURE_RECOVERED = 203; | |
// Events for the Fans | |
EVENT_FAN_FAILURE = 300; | |
EVENT_FAN_PLUG_OUT = 301; | |
EVENT_FAN_PLUG_IN = 302; | |
EVENT_FAN_FAILURE_RECOVERED = 303; | |
// Events for the CPUs | |
EVENT_CPU_TEMPERATURE_ABOVE_CRITICAL = 400; | |
EVENT_CPU_TEMPERATURE_ABOVE_FATAL = 401; | |
EVENT_CPU_TEMPERATURE_ABOVE_CRITICAL_RECOVERED = 402; | |
EVENT_CPU_TEMPERATURE_ABOVE_FATAL_RECOVERED = 403; | |
// Events for the complete HW Device | |
EVENT_HW_DEVICE_RESET = 500; | |
EVENT_HW_DEVICE_TEMPERATURE_ABOVE_CRITICAL = 501; | |
EVENT_HW_DEVICE_TEMPERATURE_ABOVE_FATAL = 502; | |
EVENT_HW_DEVICE_TEMPERATURE_ABOVE_CRITICAL_RECOVERED = 503; | |
EVENT_HW_DEVICE_TEMPERATURE_ABOVE_FATAL_RECOVERED = 504; | |
EVENT_HW_DEVICE_REBOOT = 505; | |
// More to be added | |
} | |
message ValueType { | |
oneof val{ | |
int64 int_val = 1; | |
uint64 uint_val = 2; | |
float float_val = 3; | |
} | |
} | |
message WaterMarks { | |
ValueType high = 1; | |
ValueType low = 2; | |
} | |
message Thresholds { | |
oneof threshold { | |
WaterMarks upper = 1; | |
WaterMarks lower = 2; | |
} | |
} | |
message ThresholdInformation { | |
ValueType observed_value = 1; | |
Thresholds thresholds = 2; | |
} | |
message EventCfg { | |
EventIds event_id = 1; | |
bool is_configured = 2; | |
// Optional threshold values, applicable only for some specific events | |
Thresholds thresholds = 3; | |
} | |
message EventsCfg { | |
repeated EventCfg items = 1; | |
} | |
message ListEventsResponse { | |
enum Reason { | |
UNDEFINED_REASON = 0; | |
UNKNOWN_DEVICE = 1; | |
INTERNAL_ERROR = 2; | |
DEVICE_UNREACHABLE = 3; | |
} | |
Status status = 1; | |
Reason reason = 2; | |
EventsCfg events = 3; | |
string reason_detail = 4; | |
} | |
message EventsConfigurationRequest { | |
Uuid device_uuid = 1; | |
oneof operation { | |
EventsCfg changes = 2; | |
bool reset_to_default = 3; | |
} | |
} | |
message EventsConfigurationResponse { | |
enum Reason { | |
UNDEFINED_REASON = 0; | |
UNKNOWN_DEVICE = 1; | |
INTERNAL_ERROR = 2; | |
INVALID_CONFIG = 3; | |
DEVICE_UNREACHABLE = 4; | |
} | |
Status status = 1; | |
Reason reason = 2; | |
string reason_detail = 3; | |
} | |
message EventMetaData { | |
Uuid device_uuid = 1; | |
// uuid of the component | |
Uuid component_uuid = 2; | |
string component_name = 3; | |
} | |
// The Events are conveyed to external systems either by submitting them on a message bus or using gRPC server streaming. | |
// The message bus topic to which are Events are submitted would be configured as startup | |
// configuration of the components | |
message Event { | |
EventMetaData event_metadata = 1; | |
EventIds event_id = 2; | |
google.protobuf.Timestamp raised_ts = 3; | |
// Optional threshold information for an event | |
ThresholdInformation threshold_info = 4; | |
// Any additional info regarding the event | |
string add_info = 5; | |
} | |
service NativeEventsManagementService { | |
// List the supported events for the passed device | |
rpc ListEvents(HardwareID) returns(ListEventsResponse); | |
// Updates the configuration of the list of events in the request | |
// The default behavior of the device is to report all the supported events | |
// This configuration is persisted across reboots of the device or the device manager | |
rpc UpdateEventsConfiguration(EventsConfigurationRequest) returns(EventsConfigurationResponse); | |
// Initiate the server streaming of the events | |
rpc StreamEvents(google.protobuf.Empty) returns(stream Event); | |
} |