demo_test/functional_test/README

// Copyright 2018 Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.


'dm' is a command line wrapper of the test application 'demotest' serving the purpose of device-management API functional testing.

It runs on top of the device-management container and 'demotest' requiring the accessibility of at least 2 separate devices running RedFish servers and can be utilized in either automated or manual testing. Either way, the device-mangement container needs to have been deployed (Please refer to Device Management Deployment Guide).

1. Test Automation
   Test cases utilizing 'dm' are provided in the tests/ sub-directory. They can be executed through either the Makefile or the Robot Framework test suite that are provided.

   a) Makefile
      At command line, type
	make test IP1=<ip of 1st device> PORT1=<RF port # of 1st device> IP2=<ip of 2nd device> PORT2=<RF port # of 2nd device>

   b) Robot Framework
      i) Make and launch 'demotest', which ls located one level up, first.
      ii) Modify the test suite with the appropriate ip's and port #'s of the RF servers
      iii) At command line, type
	robot importer.robot

2. Manual testing at command line
   To build 'dm', at command line, type
	make
   To run 'dm', please make and launch 'demotest' first then follow the syntax and examples below.

-------------------------------------------------------------------------------
register one device
Example: Set IP 192.168.4.27 port 8888 freq 180
./dm attach 192.168.4.27:8888:180

-------------------------------------------------------------------------------
register multiple devices
Example: Set "IP 192.168.4.27 port 8888 freq 180" and "IP 192.168.4.26 port 8888 freq 120"
./dm attach 192.168.4.27:8888:180 192.168.4.26:8888:120

-------------------------------------------------------------------------------
delete devices
Example: Delete "IP 192.168.4.27" and "IP 192.168.3.34"
./dm delete 192.168.4.27:8888 192.168.4.26:8888

-------------------------------------------------------------------------------
Get Current List of Devices monitored
./dm showdevices
Sample output: 192.168.4.26:8888 192.168.4.27:8888

-------------------------------------------------------------------------------
UnSubscribe all events(ResourceAdded/ResourceRemoved/Alert)
./dm cleardeviceeventlist 192.168.4.27:8888

-------------------------------------------------------------------------------
Subscribe all events(ResourceAdded/ResourceRemoved/Alert)
./dm sub 192.168.4.27:8888:add:rm:alert

-------------------------------------------------------------------------------
Subscribe and unsubscribe an event
Example:
Subscribe ResourceAdded event
./dm sub 192.168.4.27:8888:add
Subscribe ResourceRemoved event
./dm sub 192.168.4.27:8888:rm
Subscribe Alert event
./dm sub 192.168.4.27:8888:alert
Unsubscribe ResourceAdded event
./dm unsub 192.168.4.27:8888:add
Unsubscribe ResourceRemoved event
./dm unsub 192.168.4.27:8888:rm
Unsubscribe Alert event
./dm unsub 192.168.4.27:8888:alert

-------------------------------------------------------------------------------
Subscribe an unsupported event
./dm sub 192.168.4.27:8888:update

-------------------------------------------------------------------------------
Subscribe to an already subscribed event
Example:
./dm sub 192.168.4.27:8888:add
./dm sub 192.168.4.27:8888:add

-------------------------------------------------------------------------------
Unsubscribe an unsupported event
./dm unsub 192.168.4.27:8888:update

-------------------------------------------------------------------------------
Unsubscribe a supported but not-subscribed event
Example:
./dm unsub 192.168.4.27:8888:add:rm:alert
./dm unsub 192.168.4.27:8888:add
./dm unsub 192.168.4.27:8888:rm
./dm unsub 192.168.4.27:8888:alert

-------------------------------------------------------------------------------
Change polling interval
Example:
Set frequecny to 30 seconds
./dm period 192.168.4.27:8888:30

-------------------------------------------------------------------------------
Show list of supported event
./dm showeventlist 192.168.4.27:8888

-------------------------------------------------------------------------------
Show current events subscribed by device
showdeviceeventlist 192.168.4.27:8888

-------------------------------------------------------------------------------
Note: following command can be used to verify the list of events subscribed
wget --no-check-certificate -qO- https://192.168.4.27:8888/redfish/v1/EventService/Subscriptions | python -m json.tool