Merge "Update docs to point to new Trellis documentation"
diff --git a/installation/fabric-setup.md b/installation/fabric-setup.md
index c4c1b8c..613c7e0 100644
--- a/installation/fabric-setup.md
+++ b/installation/fabric-setup.md
@@ -3,11 +3,12 @@
CORD uses the Trellis fabric to connect the data plane components together.
This section describes how to setup the software for these switches.
-The latest [Trellis Fabric](https://docs.trellisfabric.org/) documentation can be found on the CORD wiki.
+The latest documentation can be found on the [Trellis documentation
+site](https://docs.trellisfabric.org/).
## Supported Switches
-The list of supported hardware can be found in the [hardware requirements page](../prereqs/hardware.md).
+The list of supported hardware can be found in the [hardware requirements page](../prereqs/hardware.md)
## Operating System
diff --git a/prereqs/hardware.md b/prereqs/hardware.md
index e62efd4..e201bfd 100644
--- a/prereqs/hardware.md
+++ b/prereqs/hardware.md
@@ -46,11 +46,13 @@
Following is a list of hardware that people from the ONF community
have tested over time in lab trials.
+
* **Compute Machines**
* OCP Inspired™ QuantaGrid D51B-1U server. Each
server is configured with 2x Intel E5-2630 v4 10C 2.2GHz 85W, 64GB of RAM 2133MHz DDR4, 2x 500GB HDD, and a 40 Gig adapter.
-* **Fabric Switches**
+* **Fabric Switches** - see also the [Trellis Documentation Supported
+ Hardware](https://docs.trellisfabric.org/supported-hardware.html)
* **1G/10G** models (with 40G uplinks)
* OCP Accepted™ EdgeCore AS5712-54X
* OCP Accepted™ EdgeCore AS5812-54X
diff --git a/profiles/comac/install/prerequisites.md b/profiles/comac/install/prerequisites.md
index a52ec79..7b20e71 100644
--- a/profiles/comac/install/prerequisites.md
+++ b/profiles/comac/install/prerequisites.md
@@ -27,10 +27,10 @@
- 3x x86 server (10G NIC)
- 1x OpenFlow switch (40G NIC)
- 1x DAC breakout cable
- 5x Ethernet copper cables
+ 3x x86 server (10G NIC)
+ 1x OpenFlow switch (40G NIC)
+ 1x DAC breakout cable
+ 5x Ethernet copper cables
2x layer 2 switches, one is for management, another is as converter between 1G and 10G NICs
@@ -145,7 +145,7 @@
```
## Fabric Configuration
-You can refer to [Trellis Underlay Fabric](https://wiki.opencord.org/display/CORD/) for more info on how to config the fabric.
+You can refer to [Trellis Fabric Documentation](https://docs.trellisfabric.org/) for more info on how to config the fabric.
You can modify the exmpale file "mcord-local-cluster-fabric-accelleran.yaml" according to your netowrk, and insert fabric configuration with command: