| """ |
| Copyright 2020 The Magma Authors. |
| |
| This source code is licensed under the BSD-style license found in the |
| LICENSE file in the root directory of this source tree. |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| """ |
| |
| import traceback |
| from abc import abstractmethod |
| from typing import Any, Dict |
| |
| from common.service import MagmaService |
| import metrics |
| from data_models.data_model_parameters import ParameterName |
| from device_config.enodeb_configuration import EnodebConfiguration |
| from exceptions import ConfigurationError |
| from logger import EnodebdLogger as logger |
| from state_machines.enb_acs import EnodebAcsStateMachine |
| from state_machines.enb_acs_states import EnodebAcsState |
| from state_machines.timer import StateMachineTimer |
| from tr069 import models |
| from tr069.models import Tr069ComplexModel |
| |
| |
| class BasicEnodebAcsStateMachine(EnodebAcsStateMachine): |
| """ |
| Most of the EnodebAcsStateMachine classes for each device work about the |
| same way. Differences lie mainly in the data model, desired configuration, |
| and the state transition map. |
| |
| This class specifies the shared implementation between them. |
| """ |
| |
| # eNodeB connection timeout is used to determine whether or not eNodeB is |
| # connected to enodebd based on time of last Inform message. By default, |
| # periodic inform interval is 30secs, so timeout should be larger than |
| # this. |
| # Also set timer longer than reboot time, so that an eNodeB reboot does not |
| # trigger a connection-timeout alarm. |
| ENB_CONNECTION_TIMEOUT = 600 # In seconds |
| |
| # If eNodeB is disconnected from MME for an unknown reason for this time, |
| # then reboot it. Set to a long time to ensure this doesn't interfere with |
| # other enodebd configuration processes - it is just a measure of last |
| # resort for an unlikely error case |
| MME_DISCONNECT_ENODEB_REBOOT_TIMER = 15 * 60 |
| |
| # Check the MME connection status every 15 seconds |
| MME_CHECK_TIMER = 15 |
| |
| def __init__( |
| self, |
| service: MagmaService, |
| use_param_key: bool, |
| ) -> None: |
| super().__init__(use_param_key=use_param_key) |
| self.state = None |
| self.timeout_handler = None |
| self.mme_timeout_handler = None |
| self.mme_timer = None |
| self._start_state_machine(service) |
| |
| def get_state(self) -> str: |
| if self.state is None: |
| logger.warning('ACS State machine is not in any state.') |
| return 'N/A' |
| return self.state.state_description() |
| |
| def handle_tr069_message( |
| self, |
| message: Tr069ComplexModel, |
| ) -> Tr069ComplexModel: |
| """ |
| Accept the tr069 message from the eNB and produce a reply. |
| |
| States may transition after reading a message but BEFORE producing |
| a reply. Most steps in the provisioning process are represented as |
| beginning with enodebd sending a request to the eNB, and waiting for |
| the reply from the eNB. |
| """ |
| # TransferComplete messages come at random times, and we ignore them |
| if isinstance(message, models.TransferComplete): |
| return models.TransferCompleteResponse() |
| try: |
| self._read_tr069_msg(message) |
| return self._get_tr069_msg(message) |
| except Exception: # pylint: disable=broad-except |
| logger.error('Failed to handle tr069 message') |
| logger.error(traceback.format_exc()) |
| self._dump_debug_info() |
| self.transition(self.unexpected_fault_state_name) |
| return self._get_tr069_msg(message) |
| |
| def transition(self, next_state: str) -> Any: |
| logger.debug('State transition to <%s>', next_state) |
| self.state.exit() |
| self.state = self.state_map[next_state] |
| self.state.enter() |
| |
| def stop_state_machine(self) -> None: |
| """ Clean up anything the state machine is tracking or doing """ |
| self.state.exit() |
| if self.timeout_handler is not None: |
| self.timeout_handler.cancel() |
| self.timeout_handler = None |
| if self.mme_timeout_handler is not None: |
| self.mme_timeout_handler.cancel() |
| self.mme_timeout_handler = None |
| self._service = None |
| self._desired_cfg = None |
| self._device_cfg = None |
| self._data_model = None |
| |
| self.mme_timer = None |
| |
| def _start_state_machine( |
| self, |
| service: MagmaService, |
| ): |
| self.service = service |
| self.data_model = self.data_model_class() |
| # The current known device config has few known parameters |
| # The desired configuration depends on what the current configuration |
| # is. This we don't know fully, yet. |
| self.device_cfg = EnodebConfiguration(self.data_model) |
| |
| self._init_state_map() |
| self.state = self.state_map[self.disconnected_state_name] |
| self.state.enter() |
| self._reset_timeout() |
| self._periodic_check_mme_connection() |
| |
| def _reset_state_machine( |
| self, |
| service: MagmaService, |
| ): |
| self.stop_state_machine() |
| self._start_state_machine(service) |
| |
| def _read_tr069_msg(self, message: Any) -> None: |
| """ Process incoming message and maybe transition state """ |
| self._reset_timeout() |
| msg_handled, next_state = self.state.read_msg(message) |
| if not msg_handled: |
| self._transition_for_unexpected_msg(message) |
| _msg_handled, next_state = self.state.read_msg(message) |
| if next_state is not None: |
| self.transition(next_state) |
| |
| def _get_tr069_msg(self, message: Any) -> Any: |
| """ Get a new message to send, and maybe transition state """ |
| msg_and_transition = self.state.get_msg(message) |
| if msg_and_transition.next_state: |
| self.transition(msg_and_transition.next_state) |
| msg = msg_and_transition.msg |
| return msg |
| |
| def _transition_for_unexpected_msg(self, message: Any) -> None: |
| """ |
| eNB devices may send an Inform message in the middle of a provisioning |
| session. To deal with this, transition to a state that expects an |
| Inform message, but also track the status of the eNB as not having |
| been disconnected. |
| """ |
| if isinstance(message, models.Inform): |
| logger.debug( |
| 'ACS in (%s) state. Received an Inform message', |
| self.state.state_description(), |
| ) |
| self._reset_state_machine(self.service) |
| elif isinstance(message, models.Fault): |
| logger.debug( |
| 'ACS in (%s) state. Received a Fault <%s>', |
| self.state.state_description(), message.FaultString, |
| ) |
| self.transition(self.unexpected_fault_state_name) |
| else: |
| raise ConfigurationError('Cannot handle unexpected TR069 msg') |
| |
| def _reset_timeout(self) -> None: |
| if self.timeout_handler is not None: |
| self.timeout_handler.cancel() |
| |
| def timed_out(): |
| self.transition(self.disconnected_state_name) |
| |
| self.timeout_handler = self.event_loop.call_later( |
| self.ENB_CONNECTION_TIMEOUT, |
| timed_out, |
| ) |
| |
| def _periodic_check_mme_connection(self) -> None: |
| self._check_mme_connection() |
| self.mme_timeout_handler = self.event_loop.call_later( |
| self.MME_CHECK_TIMER, |
| self._periodic_check_mme_connection, |
| ) |
| |
| def _check_mme_connection(self) -> None: |
| """ |
| Check if eNodeB should be connected to MME but isn't, and maybe reboot. |
| |
| If the eNB doesn't report connection to MME within a timeout period, |
| get it to reboot in the hope that it will fix things. |
| |
| Usually, enodebd polls the eNodeB for whether it is connected to MME. |
| This method checks the last polled MME connection status, and if |
| eNodeB should be connected to MME but it isn't. |
| """ |
| if self.device_cfg.has_parameter(ParameterName.MME_STATUS) and \ |
| self.device_cfg.get_parameter(ParameterName.MME_STATUS): |
| is_mme_connected = 1 |
| else: |
| is_mme_connected = 0 |
| |
| # True if we would expect MME to be connected, but it isn't |
| is_mme_unexpectedly_dc = \ |
| self.is_enodeb_connected() \ |
| and self.is_enodeb_configured() \ |
| and self.mconfig.allow_enodeb_transmit \ |
| and not is_mme_connected |
| |
| if is_mme_unexpectedly_dc: |
| logger.warning( |
| 'eNodeB is connected to AGw, is configured, ' |
| 'and has AdminState enabled for transmit. ' |
| 'MME connection to eNB is missing.', |
| ) |
| if self.mme_timer is None: |
| logger.warning( |
| 'eNodeB will be rebooted if MME connection ' |
| 'is not established in: %s seconds.', |
| self.MME_DISCONNECT_ENODEB_REBOOT_TIMER, |
| ) |
| metrics.STAT_ENODEB_REBOOT_TIMER_ACTIVE.set(1) |
| self.mme_timer = \ |
| StateMachineTimer(self.MME_DISCONNECT_ENODEB_REBOOT_TIMER) |
| elif self.mme_timer.is_done(): |
| logger.warning( |
| 'eNodeB has not established MME connection ' |
| 'within %s seconds - rebooting!', |
| self.MME_DISCONNECT_ENODEB_REBOOT_TIMER, |
| ) |
| metrics.STAT_ENODEB_REBOOTS.labels(cause='MME disconnect').inc() |
| metrics.STAT_ENODEB_REBOOT_TIMER_ACTIVE.set(0) |
| self.mme_timer = None |
| self.reboot_asap() |
| else: |
| # eNB is not connected to MME, but we're still waiting to see |
| # if it will connect within the timeout period. |
| # Take no action for now. |
| pass |
| else: |
| if self.mme_timer is not None: |
| logger.info('eNodeB has established MME connection.') |
| self.mme_timer = None |
| metrics.STAT_ENODEB_REBOOT_TIMER_ACTIVE.set(0) |
| |
| def _dump_debug_info(self) -> None: |
| if self.device_cfg is not None: |
| logger.error( |
| 'Device configuration: %s', |
| self.device_cfg.get_debug_info(), |
| ) |
| else: |
| logger.error('Device configuration: None') |
| if self.desired_cfg is not None: |
| logger.error( |
| 'Desired configuration: %s', |
| self.desired_cfg.get_debug_info(), |
| ) |
| else: |
| logger.error('Desired configuration: None') |
| |
| @abstractmethod |
| def _init_state_map(self) -> None: |
| pass |
| |
| @property |
| @abstractmethod |
| def state_map(self) -> Dict[str, EnodebAcsState]: |
| pass |
| |
| @property |
| @abstractmethod |
| def disconnected_state_name(self) -> str: |
| pass |
| |
| @property |
| @abstractmethod |
| def unexpected_fault_state_name(self) -> str: |
| """ State to handle unexpected Fault messages """ |
| pass |