| # SPDX-FileCopyrightText: 2020 The Magma Authors. |
| # SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org> |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| |
| # pylint: disable=protected-access |
| from unittest import TestCase |
| |
| from data_models.data_model_parameters import ParameterName |
| from device_config.configuration_init import ( |
| _get_enb_config, |
| _set_bandwidth, |
| _set_earfcn_freq_band_mode, |
| _set_management_server, |
| _set_misc_static_params, |
| _set_pci, |
| _set_perf_mgmt, |
| _set_plmnids_tac, |
| _set_s1_connection, |
| _set_tdd_subframe_config, |
| ) |
| from device_config.enodeb_configuration import EnodebConfiguration |
| from devices.baicells import BaicellsTrDataModel |
| from exceptions import ConfigurationError |
| from tests.test_utils.config_builder import EnodebConfigBuilder |
| |
| |
| class EnodebConfigurationFactoryTest(TestCase): |
| |
| def setUp(self): |
| self.data_model = BaicellsTrDataModel() |
| self.cfg = EnodebConfiguration(BaicellsTrDataModel()) |
| self.device_cfg = EnodebConfiguration(BaicellsTrDataModel()) |
| |
| def tearDown(self): |
| self.data_model = None |
| self.cfg = None |
| self.device_cfg = None |
| |
| def test_set_pci(self): |
| pci = 3 |
| _set_pci(self.cfg, pci) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.PCI1), pci, |
| 'PCI value should be same as what was set', |
| ) |
| with self.assertRaises(ConfigurationError): |
| _set_pci(self.cfg, 505) |
| |
| def test_set_bandwidth(self): |
| mhz = 15 |
| _set_bandwidth(self.cfg, self.data_model, mhz) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.DL_BANDWIDTH), |
| mhz, |
| 'Should have set %s' % ParameterName.DL_BANDWIDTH, |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.UL_BANDWIDTH), |
| mhz, |
| 'Should have set %s' % ParameterName.UL_BANDWIDTH, |
| ) |
| |
| def test_set_tdd_subframe_config(self): |
| # Not TDD mode, should not try to set anything |
| self.device_cfg.set_parameter( |
| ParameterName.DUPLEX_MODE_CAPABILITY, 'Not TDDMode', |
| ) |
| subframe = 0 |
| special_subframe = 0 |
| _set_tdd_subframe_config( |
| self.device_cfg, self.cfg, subframe, |
| special_subframe, |
| ) |
| self.assertTrue( |
| ParameterName.SUBFRAME_ASSIGNMENT not in |
| self.cfg.get_parameter_names(), |
| ) |
| |
| # Invalid subframe assignment |
| self.device_cfg.set_parameter( |
| ParameterName.DUPLEX_MODE_CAPABILITY, 'TDDMode', |
| ) |
| _set_tdd_subframe_config( |
| self.device_cfg, self.cfg, subframe, |
| special_subframe, |
| ) |
| self.assertIn( |
| ParameterName.SUBFRAME_ASSIGNMENT, |
| self.cfg.get_parameter_names(), |
| 'Expected a subframe assignment', |
| ) |
| |
| def test_set_management_server(self): |
| _set_management_server(self.cfg) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.PERIODIC_INFORM_ENABLE), |
| True, 'Expected periodic inform enable to be true', |
| ) |
| self.assertTrue( |
| isinstance( |
| self.cfg.get_parameter(ParameterName.PERIODIC_INFORM_INTERVAL), |
| int, |
| ), |
| 'Expected periodic inform interval to ani integer', |
| ) |
| |
| def test_set_s1_connection(self): |
| invalid_mme_ip = 1234 |
| invalid_mme_port = '8080' |
| mme_ip = '192.168.0.1' |
| mme_port = 8080 |
| |
| # MME IP should be a string |
| with self.assertRaises(ConfigurationError): |
| _set_s1_connection(self.cfg, invalid_mme_ip, mme_port) |
| |
| # MME Port should be an integer |
| with self.assertRaises(ConfigurationError): |
| _set_s1_connection(self.cfg, mme_ip, invalid_mme_port) |
| |
| # Check the ip and port are sort properly |
| _set_s1_connection(self.cfg, mme_ip, mme_port) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.MME_ADDRESS), mme_ip, |
| 'Expected mme ip to be set', |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.MME_PORT), mme_port, |
| 'Expected mme port to be set', |
| ) |
| |
| def test_set_perf_mgmt(self): |
| mgmt_ip = '192.168.0.1' |
| mgmt_upload_interval = 300 |
| mgmt_port = 8080 |
| _set_perf_mgmt(self.cfg, mgmt_ip, mgmt_port) |
| self.assertTrue( |
| self.cfg.get_parameter(ParameterName.PERF_MGMT_ENABLE), |
| 'Expected perf mgmt to be enabled', |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.PERF_MGMT_UPLOAD_INTERVAL), |
| mgmt_upload_interval, 'Expected upload interval to be set', |
| ) |
| expected_url = 'http://192.168.0.1:8080/' |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.PERF_MGMT_UPLOAD_URL), |
| expected_url, 'Incorrect Url', |
| ) |
| |
| def test_set_misc_static_params(self): |
| # IPSec enable as integer |
| self.device_cfg.set_parameter(ParameterName.IP_SEC_ENABLE, 0) |
| self.data_model.set_parameter_presence(ParameterName.GPS_ENABLE, True) |
| _set_misc_static_params(self.device_cfg, self.cfg, self.data_model) |
| self.assertTrue( |
| isinstance( |
| self.cfg.get_parameter(ParameterName.IP_SEC_ENABLE), int, |
| ), |
| 'Should support an integer IP_SEC_ENABLE parameter', |
| ) |
| |
| # IPSec enable as boolean |
| self.device_cfg.set_parameter(ParameterName.IP_SEC_ENABLE, 'False') |
| _set_misc_static_params(self.device_cfg, self.cfg, self.data_model) |
| self.assertTrue( |
| isinstance( |
| self.cfg.get_parameter(ParameterName.IP_SEC_ENABLE), bool, |
| ), |
| 'Should support a boolean IP_SEC_ENABLE parameter', |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.LOCAL_GATEWAY_ENABLE), 0, |
| 'Should be disabled', |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.CELL_RESERVED), False, |
| 'Should be disabled', |
| ) |
| self.assertEqual( |
| self.cfg.get_parameter(ParameterName.MME_POOL_ENABLE), False, |
| 'Should be disabled', |
| ) |
| |
| def test_set_plmnids_tac(self): |
| # We only handle a single PLMNID for now |
| plmnids = '1, 2, 3, 4' |
| tac = 1 |
| with self.assertRaises(ConfigurationError): |
| _set_plmnids_tac(self.cfg, plmnids, tac) |
| |
| # Max PLMNID length is 6 characters |
| plmnids = '1234567' |
| with self.assertRaises(ConfigurationError): |
| _set_plmnids_tac(self.cfg, plmnids, tac) |
| |
| # Check that only one PLMN element is enabled |
| plmnids = '1' |
| _set_plmnids_tac(self.cfg, plmnids, tac) |
| self.assertTrue( |
| self.cfg.get_parameter_for_object( |
| ParameterName.PLMN_N_ENABLE % 1, ParameterName.PLMN_N % 1, |
| ), |
| 'First PLMN should be enabled', |
| ) |
| self.assertFalse( |
| self.cfg.has_object(ParameterName.PLMN_N % 2), |
| 'Second PLMN should be disabled', |
| ) |
| |
| def test_set_earafcn_freq_band_mode(self): |
| # Invalid earfcndl |
| with self.assertRaises(ConfigurationError): |
| invalid_earfcndl = -1 |
| _set_earfcn_freq_band_mode( |
| self.device_cfg, self.cfg, |
| self.data_model, invalid_earfcndl, |
| ) |
| |
| # Duplex_mode is TDD but capability is FDD |
| with self.assertRaises(ConfigurationError): |
| self.device_cfg.set_parameter( |
| ParameterName.DUPLEX_MODE_CAPABILITY, 'FDDMode', |
| ) |
| earfcndl = 38650 # Corresponds to TDD |
| _set_earfcn_freq_band_mode( |
| self.device_cfg, self.cfg, |
| self.data_model, earfcndl, |
| ) |
| |
| # Duplex_mode is FDD but capability is TDD |
| with self.assertRaises(ConfigurationError): |
| self.device_cfg.set_parameter( |
| ParameterName.DUPLEX_MODE_CAPABILITY, 'TDDMode', |
| ) |
| earfcndl = 0 # Corresponds to FDD |
| _set_earfcn_freq_band_mode( |
| self.device_cfg, self.cfg, |
| self.data_model, earfcndl, |
| ) |
| |
| def test_get_enb_config(self): |
| mconfig = EnodebConfigBuilder.get_mconfig() |
| enb_config = _get_enb_config(mconfig, self.device_cfg) |
| self.assertTrue( |
| enb_config.earfcndl == 39150, |
| "Should give earfcndl from default eNB config", |
| ) |
| |
| mconfig = EnodebConfigBuilder.get_multi_enb_mconfig() |
| self.device_cfg.set_parameter( |
| ParameterName.SERIAL_NUMBER, |
| '120200002618AGP0003', |
| ) |
| enb_config = _get_enb_config(mconfig, self.device_cfg) |
| self.assertTrue( |
| enb_config.earfcndl == 39151, |
| "Should give earfcndl from specific eNB config", |
| ) |