| # SPDX-FileCopyrightText: 2020 The Magma Authors. |
| # SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org> |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| |
| """ |
| Copyright 2020 The Magma Authors. |
| |
| This source code is licensed under the BSD-style license found in the |
| LICENSE file in the root directory of this source tree. |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| """ |
| |
| from prometheus_client import Counter, Gauge |
| |
| # Gauges for current eNodeB status |
| STAT_ENODEB_CONNECTED = Gauge( |
| 'enodeb_mgmt_connected', |
| 'ENodeB management plane connected', |
| ) |
| STAT_ENODEB_CONFIGURED = Gauge( |
| 'enodeb_mgmt_configured', |
| 'ENodeB is in configured state', |
| ) |
| STAT_OPSTATE_ENABLED = Gauge( |
| 'enodeb_opstate_enabled', |
| 'ENodeB operationally enabled', |
| ) |
| STAT_RF_TX_ENABLED = Gauge( |
| 'enodeb_rf_tx_enabled', |
| 'ENodeB RF transmitter enabled', |
| ) |
| STAT_RF_TX_DESIRED = Gauge( |
| 'enodeb_rf_tx_desired', |
| 'ENodeB RF transmitter desired state', |
| ) |
| STAT_GPS_CONNECTED = Gauge( |
| 'enodeb_gps_connected', |
| 'ENodeB GPS synchronized', |
| ) |
| STAT_PTP_CONNECTED = Gauge( |
| 'enodeb_ptp_connected', |
| 'ENodeB PTP/1588 synchronized', |
| ) |
| STAT_MME_CONNECTED = Gauge( |
| 'enodeb_mme_connected', |
| 'ENodeB connected to MME', |
| ) |
| STAT_ENODEB_REBOOT_TIMER_ACTIVE = Gauge( |
| 'enodeb_reboot_timer_active', |
| 'Timer for ENodeB reboot active', |
| ) |
| STAT_ENODEB_REBOOTS = Counter( |
| 'enodeb_reboots', |
| 'ENodeB reboots by enodebd', ['cause'], |
| ) |
| STAT_ENODEB_LAST_CONFIGURED = Gauge( |
| 'enodeb_last_configured', |
| 'Information of configured eNodeB', ['serial_number', 'ip_address', 'gps_lat', 'gps_lon'] |
| ) |
| |
| # Metrics that are accumulated by eNodeB. Use gauges to avoid 'double-counting', |
| # since eNodeB does accumulation. |
| STAT_RRC_ESTAB_ATT = Gauge( |
| 'rrc_estab_attempts', 'RRC establishment attempts', |
| ) |
| STAT_RRC_ESTAB_SUCC = Gauge( |
| 'rrc_estab_successes', 'RRC establishment successes', |
| ) |
| STAT_RRC_REESTAB_ATT = Gauge( |
| 'rrc_reestab_attempts', 'RRC re-establishment attempts', |
| ) |
| STAT_RRC_REESTAB_ATT_RECONF_FAIL = Gauge( |
| 'rrc_reestab_attempts_reconf_fail', |
| 'RRC re-establishment attempts due to reconfiguration failure', |
| ) |
| STAT_RRC_REESTAB_ATT_HO_FAIL = Gauge( |
| 'rrc_reestab_attempts_ho_fail', |
| 'RRC re-establishment attempts due to handover failure', |
| ) |
| STAT_RRC_REESTAB_ATT_OTHER = Gauge( |
| 'rrc_reestab_attempts_other', |
| 'RRC re-establishment attempts due to other cause', |
| ) |
| STAT_RRC_REESTAB_SUCC = Gauge( |
| 'rrc_reestab_successes', 'RRC re-establishment successes', |
| ) |
| STAT_ERAB_ESTAB_ATT = Gauge( |
| 'erab_estab_attempts', 'ERAB establishment attempts', |
| ) |
| STAT_ERAB_ESTAB_SUCC = Gauge( |
| 'erab_estab_successes', 'ERAB establishment successes', |
| ) |
| STAT_ERAB_ESTAB_FAIL = Gauge( |
| 'erab_estab_failures', 'ERAB establishment failures', |
| ) |
| STAT_ERAB_REL_REQ = Gauge( |
| 'erab_release_requests', 'ERAB release requests', |
| ) |
| STAT_ERAB_REL_REQ_USER_INAC = Gauge( |
| 'erab_release_requests_user_inactivity', |
| 'ERAB release requests due to user inactivity', |
| ) |
| STAT_ERAB_REL_REQ_NORMAL = Gauge( |
| 'erab_release_requests_normal', 'ERAB release requests due to normal cause', |
| ) |
| STAT_ERAB_REL_REQ_RES_NOT_AVAIL = Gauge( |
| 'erab_release_requests_radio_resources_not_available', |
| 'ERAB release requests due to radio resources not available', |
| ) |
| STAT_ERAB_REL_REQ_REDUCE_LOAD = Gauge( |
| 'erab_release_requests_reduce_load', |
| 'ERAB release requests due to reducing load in serving cell', |
| ) |
| STAT_ERAB_REL_REQ_FAIL_IN_RADIO = Gauge( |
| 'erab_release_requests_fail_in_radio_proc', |
| 'ERAB release requests due to failure in the radio interface procedure', |
| ) |
| STAT_ERAB_REL_REQ_EUTRAN_REAS = Gauge( |
| 'erab_release_requests_eutran_reas', |
| 'ERAB release requests due to EUTRAN generated reasons', |
| ) |
| STAT_ERAB_REL_REQ_RADIO_CONN_LOST = Gauge( |
| 'erab_release_requests_radio_radio_conn_lost', |
| 'ERAB release requests due to radio connection with UE lost', |
| ) |
| STAT_ERAB_REL_REQ_OAM_INTV = Gauge( |
| 'erab_release_requests_oam_intervention', |
| 'ERAB release requests due to OAM intervention', |
| ) |
| STAT_PDCP_USER_PLANE_BYTES_UL = Gauge( |
| 'pdcp_user_plane_bytes_ul', 'User plane uplink bytes at PDCP', ['enodeb'], |
| ) |
| STAT_PDCP_USER_PLANE_BYTES_DL = Gauge( |
| 'pdcp_user_plane_bytes_dl', 'User plane downlink bytes at PDCP', ['enodeb'], |
| ) |