| # SPDX-FileCopyrightText: 2020 The Magma Authors. |
| # SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org> |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| |
| from typing import Any, Callable, Dict, List, Optional, Type |
| |
| from common.service import MagmaService |
| from data_models import transform_for_enb, transform_for_magma |
| from data_models.data_model import DataModel, TrParam |
| from data_models.data_model_parameters import ( |
| ParameterName, |
| TrParameterType, |
| ) |
| from device_config.enodeb_config_postprocessor import ( |
| EnodebConfigurationPostProcessor, |
| ) |
| from device_config.enodeb_configuration import EnodebConfiguration |
| from devices.baicells_qafb import ( |
| BaicellsQafbGetObjectParametersState, |
| BaicellsQafbWaitGetTransientParametersState, |
| ) |
| from devices.device_utils import EnodebDeviceName |
| from state_machines.enb_acs_impl import BasicEnodebAcsStateMachine |
| from state_machines.enb_acs_states import ( |
| AddObjectsState, |
| DeleteObjectsState, |
| EnbSendRebootState, |
| EndSessionState, |
| EnodebAcsState, |
| ErrorState, |
| GetParametersState, |
| GetRPCMethodsState, |
| SendGetTransientParametersState, |
| SetParameterValuesState, |
| WaitEmptyMessageState, |
| WaitGetParametersState, |
| WaitInformMRebootState, |
| WaitInformState, |
| WaitRebootResponseState, |
| WaitSetParameterValuesState, |
| ) |
| |
| |
| class BaicellsQAFAHandler(BasicEnodebAcsStateMachine): |
| def __init__( |
| self, |
| service: MagmaService, |
| ) -> None: |
| self._state_map = {} |
| super().__init__(service=service, use_param_key=False) |
| |
| def reboot_asap(self) -> None: |
| self.transition('reboot') |
| |
| def is_enodeb_connected(self) -> bool: |
| return not isinstance(self.state, WaitInformState) |
| |
| def _init_state_map(self) -> None: |
| self._state_map = { |
| 'wait_inform': WaitInformState(self, when_done='get_rpc_methods'), |
| 'get_rpc_methods': GetRPCMethodsState(self, when_done='wait_empty', when_skip='get_transient_params'), |
| 'wait_empty': WaitEmptyMessageState(self, when_done='get_transient_params'), |
| 'get_transient_params': SendGetTransientParametersState(self, when_done='wait_get_transient_params'), |
| 'wait_get_transient_params': BaicellsQafbWaitGetTransientParametersState(self, when_get='get_params', when_get_obj_params='get_obj_params', when_delete='delete_objs', when_add='add_objs', when_set='set_params', when_skip='end_session'), |
| 'get_params': GetParametersState(self, when_done='wait_get_params'), |
| 'wait_get_params': WaitGetParametersState(self, when_done='get_obj_params'), |
| 'get_obj_params': BaicellsQafbGetObjectParametersState(self, when_delete='delete_objs', when_add='add_objs', when_set='set_params', when_skip='end_session'), |
| 'delete_objs': DeleteObjectsState(self, when_add='add_objs', when_skip='set_params'), |
| 'add_objs': AddObjectsState(self, when_done='set_params'), |
| 'set_params': SetParameterValuesState(self, when_done='wait_set_params'), |
| 'wait_set_params': WaitSetParameterValuesState(self, when_done='check_get_params', when_apply_invasive='check_get_params'), |
| 'check_get_params': GetParametersState(self, when_done='check_wait_get_params', request_all_params=True), |
| 'check_wait_get_params': WaitGetParametersState(self, when_done='end_session'), |
| 'end_session': EndSessionState(self), |
| # These states are only entered through manual user intervention |
| 'reboot': EnbSendRebootState(self, when_done='wait_reboot'), |
| 'wait_reboot': WaitRebootResponseState(self, when_done='wait_post_reboot_inform'), |
| 'wait_post_reboot_inform': WaitInformMRebootState(self, when_done='wait_empty', when_timeout='wait_inform'), |
| # The states below are entered when an unexpected message type is |
| # received |
| 'unexpected_fault': ErrorState(self, inform_transition_target='wait_inform'), |
| } |
| |
| @property |
| def device_name(self) -> str: |
| return EnodebDeviceName.BAICELLS_QAFA |
| |
| @property |
| def data_model_class(self) -> Type[DataModel]: |
| return BaicellsQAFATrDataModel |
| |
| @property |
| def config_postprocessor(self) -> EnodebConfigurationPostProcessor: |
| return BaicellsQAFATrConfigurationInitializer() |
| |
| @property |
| def state_map(self) -> Dict[str, EnodebAcsState]: |
| return self._state_map |
| |
| @property |
| def disconnected_state_name(self) -> str: |
| return 'wait_inform' |
| |
| @property |
| def unexpected_fault_state_name(self) -> str: |
| return 'unexpected_fault' |
| |
| |
| class BaicellsQAFATrDataModel(DataModel): |
| """ |
| Class to represent relevant data model parameters from TR-196/TR-098. |
| This class is effectively read-only. |
| |
| This model specifically targets Qualcomm-based BaiCells units running |
| QAFA firmware. |
| |
| These models have these idiosyncrasies (on account of running TR098): |
| |
| - Parameter content root is different (InternetGatewayDevice) |
| - GetParameter queries with a wildcard e.g. InternetGatewayDevice. do |
| not respond with the full tree (we have to query all parameters) |
| - MME status is not exposed - we assume the MME is connected if |
| the eNodeB is transmitting (OpState=true) |
| - Parameters such as band capability/duplex config |
| are rooted under `boardconf.` and not the device config root |
| - Parameters like Admin state, CellReservedForOperatorUse, |
| Duplex mode, DL bandwidth and Band capability have different |
| formats from Intel-based Baicells units, necessitating, |
| formatting before configuration and transforming values |
| read from eNodeB state. |
| - Num PLMNs is not reported by these units |
| """ |
| # Mapping of TR parameter paths to aliases |
| DEVICE_PATH = 'InternetGatewayDevice.' |
| FAPSERVICE_PATH = DEVICE_PATH + 'Services.FAPService.1.' |
| EEPROM_PATH = 'boardconf.status.eepromInfo.' |
| PARAMETERS = { |
| # Top-level objects |
| ParameterName.DEVICE: TrParam(DEVICE_PATH, True, TrParameterType.OBJECT, False), |
| ParameterName.FAP_SERVICE: TrParam(FAPSERVICE_PATH, True, TrParameterType.OBJECT, False), |
| |
| # Qualcomm units do not expose MME_Status (We assume that the eNB is broadcasting state is connected to the MME) |
| ParameterName.MME_STATUS: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.OpState', True, TrParameterType.BOOLEAN, False), |
| ParameterName.GPS_LAT: TrParam(DEVICE_PATH + 'FAP.GPS.latitude', True, TrParameterType.STRING, False), |
| ParameterName.GPS_LONG: TrParam(DEVICE_PATH + 'FAP.GPS.longitude', True, TrParameterType.STRING, False), |
| ParameterName.SW_VERSION: TrParam(DEVICE_PATH + 'DeviceInfo.SoftwareVersion', True, TrParameterType.STRING, False), |
| ParameterName.SERIAL_NUMBER: TrParam(DEVICE_PATH + 'DeviceInfo.SerialNumber', True, TrParameterType.STRING, False), |
| |
| # Capabilities |
| ParameterName.DUPLEX_MODE_CAPABILITY: TrParam(EEPROM_PATH + 'div_multiple', True, TrParameterType.STRING, False), |
| ParameterName.BAND_CAPABILITY: TrParam(EEPROM_PATH + 'work_mode', True, TrParameterType.STRING, False), |
| |
| # RF-related parameters |
| ParameterName.EARFCNDL: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.RAN.RF.EARFCNDL', True, TrParameterType.INT, False), |
| ParameterName.PCI: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.RAN.RF.PhyCellID', True, TrParameterType.INT, False), |
| ParameterName.DL_BANDWIDTH: TrParam(DEVICE_PATH + 'Services.RfConfig.1.RfCarrierCommon.carrierBwMhz', True, TrParameterType.INT, False), |
| ParameterName.SUBFRAME_ASSIGNMENT: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.RAN.PHY.TDDFrame.SubFrameAssignment', True, 'bool', False), |
| ParameterName.SPECIAL_SUBFRAME_PATTERN: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.RAN.PHY.TDDFrame.SpecialSubframePatterns', True, TrParameterType.INT, False), |
| ParameterName.CELL_ID: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.RAN.Common.CellIdentity', True, TrParameterType.UNSIGNED_INT, False), |
| |
| # Other LTE parameters |
| ParameterName.ADMIN_STATE: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.AdminState', False, TrParameterType.STRING, False), |
| ParameterName.OP_STATE: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.OpState', True, TrParameterType.BOOLEAN, False), |
| ParameterName.RF_TX_STATUS: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.OpState', True, TrParameterType.BOOLEAN, False), |
| |
| # Core network parameters |
| ParameterName.MME_IP: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.Gateway.S1SigLinkServerList', True, TrParameterType.STRING, False), |
| ParameterName.MME_PORT: TrParam(FAPSERVICE_PATH + 'FAPControl.LTE.Gateway.S1SigLinkPort', True, TrParameterType.INT, False), |
| # This parameter is standard but doesn't exist |
| # ParameterName.NUM_PLMNS: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNListNumberOfEntries', True, TrParameterType.INT, False), |
| ParameterName.TAC: TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.TAC', True, TrParameterType.INT, False), |
| ParameterName.IP_SEC_ENABLE: TrParam('boardconf.ipsec.ipsecConfig.onBoot', False, TrParameterType.BOOLEAN, False), |
| |
| # Management server parameters |
| ParameterName.PERIODIC_INFORM_ENABLE: TrParam(DEVICE_PATH + 'ManagementServer.PeriodicInformEnable', False, TrParameterType.BOOLEAN, False), |
| ParameterName.PERIODIC_INFORM_INTERVAL: TrParam(DEVICE_PATH + 'ManagementServer.PeriodicInformInterval', False, TrParameterType.INT, False), |
| |
| # Performance management parameters |
| ParameterName.PERF_MGMT_ENABLE: TrParam(DEVICE_PATH + 'FAP.PerfMgmt.Config.Enable', False, TrParameterType.BOOLEAN, False), |
| ParameterName.PERF_MGMT_UPLOAD_INTERVAL: TrParam(DEVICE_PATH + 'FAP.PerfMgmt.Config.PeriodicUploadInterval', False, TrParameterType.INT, False), |
| ParameterName.PERF_MGMT_UPLOAD_URL: TrParam(DEVICE_PATH + 'FAP.PerfMgmt.Config.URL', False, TrParameterType.STRING, False), |
| } |
| |
| NUM_PLMNS_IN_CONFIG = 6 |
| TRANSFORMS_FOR_ENB = { |
| ParameterName.CELL_BARRED: transform_for_enb.invert_cell_barred, |
| } |
| for i in range(1, NUM_PLMNS_IN_CONFIG + 1): |
| TRANSFORMS_FOR_ENB[ParameterName.PLMN_N_CELL_RESERVED % i] = transform_for_enb.cell_reserved |
| PARAMETERS[ParameterName.PLMN_N % i] = TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNList.%d.' % i, True, TrParameterType.STRING, False) |
| PARAMETERS[ParameterName.PLMN_N_CELL_RESERVED % i] = TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNList.%d.CellReservedForOperatorUse' % i, True, TrParameterType.STRING, False) |
| PARAMETERS[ParameterName.PLMN_N_ENABLE % i] = TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNList.%d.Enable' % i, True, TrParameterType.BOOLEAN, False) |
| PARAMETERS[ParameterName.PLMN_N_PRIMARY % i] = TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNList.%d.IsPrimary' % i, True, TrParameterType.BOOLEAN, False) |
| PARAMETERS[ParameterName.PLMN_N_PLMNID % i] = TrParam(FAPSERVICE_PATH + 'CellConfig.LTE.EPC.PLMNList.%d.PLMNID' % i, True, TrParameterType.STRING, False) |
| |
| TRANSFORMS_FOR_ENB[ParameterName.ADMIN_STATE] = transform_for_enb.admin_state |
| TRANSFORMS_FOR_MAGMA = { |
| # We don't set these parameters |
| ParameterName.BAND_CAPABILITY: transform_for_magma.band_capability, |
| ParameterName.DUPLEX_MODE_CAPABILITY: transform_for_magma.duplex_mode, |
| } |
| |
| @classmethod |
| def get_parameter(cls, param_name: ParameterName) -> Optional[TrParam]: |
| return cls.PARAMETERS.get(param_name) |
| |
| @classmethod |
| def _get_magma_transforms( |
| cls, |
| ) -> Dict[ParameterName, Callable[[Any], Any]]: |
| return cls.TRANSFORMS_FOR_MAGMA |
| |
| @classmethod |
| def _get_enb_transforms(cls) -> Dict[ParameterName, Callable[[Any], Any]]: |
| return cls.TRANSFORMS_FOR_ENB |
| |
| @classmethod |
| def get_load_parameters(cls) -> List[ParameterName]: |
| """ |
| Load all the parameters instead of a subset. |
| """ |
| return list(cls.PARAMETERS.keys()) |
| |
| @classmethod |
| def get_num_plmns(cls) -> int: |
| return cls.NUM_PLMNS_IN_CONFIG |
| |
| @classmethod |
| def get_parameter_names(cls) -> List[ParameterName]: |
| excluded_params = [ |
| str(ParameterName.DEVICE), |
| str(ParameterName.FAP_SERVICE), |
| ] |
| names = list( |
| filter( |
| lambda x: (not str(x).startswith('PLMN')) |
| and (str(x) not in excluded_params), |
| cls.PARAMETERS.keys(), |
| ), |
| ) |
| return names |
| |
| @classmethod |
| def get_numbered_param_names( |
| cls, |
| ) -> Dict[ParameterName, List[ParameterName]]: |
| names = {} |
| for i in range(1, cls.NUM_PLMNS_IN_CONFIG + 1): |
| params = [] |
| params.append(ParameterName.PLMN_N_CELL_RESERVED % i) |
| params.append(ParameterName.PLMN_N_ENABLE % i) |
| params.append(ParameterName.PLMN_N_PRIMARY % i) |
| params.append(ParameterName.PLMN_N_PLMNID % i) |
| names[ParameterName.PLMN_N % i] = params |
| |
| return names |
| |
| |
| class BaicellsQAFATrConfigurationInitializer(EnodebConfigurationPostProcessor): |
| def postprocess(self, mconfig: Any, service_cfg: Any, desired_cfg: EnodebConfiguration) -> None: |
| |
| desired_cfg.delete_parameter(ParameterName.ADMIN_STATE) |