tests/baicells_old_tests.py

# SPDX-FileCopyrightText: 2020 The Magma Authors.
# SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org>
#
# SPDX-License-Identifier: BSD-3-Clause

# pylint: disable=protected-access
from devices.device_utils import EnodebDeviceName
from tests.test_utils.enb_acs_builder import (
    EnodebAcsStateMachineBuilder,
)
from tests.test_utils.enodeb_handler import EnodebHandlerTestCase
from tests.test_utils.tr069_msg_builder import Tr069MessageBuilder
from tr069 import models


class BaicellsOldHandlerTests(EnodebHandlerTestCase):
    def test_initial_enb_bootup(self) -> None:
        """
        Baicells does not support configuration during initial bootup of
        eNB device. This is because it is in a REM process, and we just need
        to wait for this process to finish, ~10 minutes. Attempting to
        configure the device during this period will cause undefined
        behavior.
        As a result of this, end any provisoning sessions, which we can do
        by just sending empty HTTP responses, not even using an
        InformResponse.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder \
                .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # Send an Inform message
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003', ['1 BOOT'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)

        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'Should respond with an InformResponse',
        )

    def test_manual_reboot(self) -> None:
        """
        Test a scenario where a Magma user goes through the enodebd CLI to
        reboot the Baicells eNodeB.

        This checks the scenario where the command is not sent in the middle
        of a TR-069 provisioning session.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder \
                .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # User uses the CLI tool to get eNodeB to reboot
        acs_state_machine.reboot_asap()

        # And now the Inform message arrives from the eNodeB
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'In reboot sequence, state machine should still '
            'respond to an Inform with InformResponse.',
        )
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.Reboot),
            'In reboot sequence, state machine should send a '
            'Reboot message.',
        )
        req = Tr069MessageBuilder.get_reboot_response()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'State machine should end TR-069 session after '
            'receiving a RebootResponse',
        )

    def test_manual_reboot_during_provisioning(self) -> None:
        """
        Test a scenario where a Magma user goes through the enodebd CLI to
        reboot the Baicells eNodeB.

        This checks the scenario where the command is sent in the middle
        of a TR-069 provisioning session.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder \
                .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # Send an Inform message, wait for an InformResponse
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'Should respond with an InformResponse',
        )

        # Send an empty http request to kick off the rest of provisioning
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for an optional parameter, three times
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()

        # User uses the CLI tool to get eNodeB to reboot
        acs_state_machine.reboot_asap()

        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.Reboot),
            'In reboot sequence, state machine should send a '
            'Reboot message.',
        )
        req = Tr069MessageBuilder.get_reboot_response()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'State machine should end TR-069 session after '
            'receiving a RebootResponse',
        )

    def test_provision_without_invasive_changes(self) -> None:
        """
        Test the scenario where:
        - eNodeB has already been powered for 10 minutes without configuration
        - Setting parameters which are 'non-invasive' on the eNodeB

        'Invasive' parameters are those which require special behavior to apply
        the changes for the eNodeB.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder \
                .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # Send an Inform message, wait for an InformResponse
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC001',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'Should respond with an InformResponse',
        )

        # Send an empty http request to kick off the rest of provisioning
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for an optional parameter, five times
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for read-only params
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_read_only_param_values_response()

        # Send back some typical values
        # And then SM should request regular parameter values
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )

        # Send back typical values for the regular parameters
        req = Tr069MessageBuilder.\
            get_regular_param_values_response(
                admin_state=False,
                earfcndl=39150,
            )
        resp = acs_state_machine.handle_tr069_message(req)

        # SM will be requesting object parameter values
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting object param vals',
        )

        # Send back some typical values for object parameters
        req = Tr069MessageBuilder.get_object_param_values_response()
        resp = acs_state_machine.handle_tr069_message(req)

        # In this scenario, the ACS and thus state machine will not need
        # to delete or add objects to the eNB configuration.
        # SM should then just be attempting to set parameter values
        self.assertTrue(
            isinstance(resp, models.SetParameterValues),
            'State machine should be setting param values',
        )

        # Send back confirmation that the parameters were successfully set
        req = models.SetParameterValuesResponse()
        req.Status = 0
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for read-only params
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_read_only_param_values_response()

        # Send back some typical values
        # And then SM should continue polling the read-only params
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'State machine should be ending session',
        )

        # If a different eNB is suddenly plugged in, or the same eNB sends a
        # new Inform, enodebd should be able to handle it.
        # Send an Inform message, wait for an InformResponse
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'Should respond with an InformResponse',
        )

        # Send an empty http request to kick off the rest of provisioning
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for an optional parameter, three times
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )

    def test_reboot_after_invasive_changes(self) -> None:
        """
        Test the scenario where:
        - eNodeB has already been powered for 10 minutes without configuration
        - Setting parameters which are 'invasive' on the eNodeB
        - Simulate the scenario up until reboot, and test that enodebd does
          not try to complete configuration after reboot, because it is
          waiting for REM process to finish running
        - This test does not wait the ten minutes to simulate REM process
          finishing on the Baicells eNodeB

        'Invasive' parameters are those which require special behavior to apply
        the changes for the eNodeB.

        In the case of the Baicells eNodeB, properly applying changes to
        invasive parameters requires rebooting the device.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder\
            .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # Send an Inform message, wait for an InformResponse
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'Should respond with an InformResponse',
        )

        # Send an empty http request to kick off the rest of provisioning
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for an optional parameter, five times
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)

        # Expect a request for read-only params
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )
        req = Tr069MessageBuilder.get_read_only_param_values_response()

        # Send back some typical values
        # And then SM should request regular parameter values
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param values',
        )

        # Send back typical values for the regular parameters
        req = Tr069MessageBuilder.get_regular_param_values_response()
        resp = acs_state_machine.handle_tr069_message(req)

        # SM will be requesting object parameter values
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting object param vals',
        )

        # Send back some typical values for object parameters
        req = Tr069MessageBuilder.get_object_param_values_response()
        resp = acs_state_machine.handle_tr069_message(req)

        # In this scenario, the ACS and thus state machine will not need
        # to delete or add objects to the eNB configuration.
        # SM should then just be attempting to set parameter values
        self.assertTrue(
            isinstance(resp, models.SetParameterValues),
            'State machine should be setting param values',
        )

        # Send back confirmation that the parameters were successfully set
        req = models.SetParameterValuesResponse()
        req.Status = 0
        resp = acs_state_machine.handle_tr069_message(req)

        # Since invasive parameters have been set, then to apply the changes
        # to the Baicells eNodeB, we need to reboot the device
        self.assertTrue(isinstance(resp, models.Reboot))
        req = Tr069MessageBuilder.get_reboot_response()
        resp = acs_state_machine.handle_tr069_message(req)

        # After the reboot has been received, enodebd should end the
        # provisioning session
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'After sending command to reboot the Baicells eNodeB, '
            'enodeb should end the TR-069 session.',
        )

        # At this point, sometime after the eNodeB reboots, we expect it to
        # send an Inform indicating reboot. Since it should be in REM process,
        # we hold off on finishing configuration, and end TR-069 sessions.
        req = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['1 BOOT', 'M Reboot'],
            )
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'After receiving a post-reboot Inform, enodebd '
            'should end TR-069 sessions for 10 minutes to wait '
            'for REM process to finish.',
        )

        # Pretend that we have waited, and now we are in normal operation again
        acs_state_machine.transition('wait_inform_post_reboot')
        req = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'After receiving a post-reboot Inform, enodebd '
            'should end TR-069 sessions for 10 minutes to wait '
            'for REM process to finish.',
        )

        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'enodebd should be requesting params',
        )
        self.assertTrue(
            len(resp.ParameterNames.string) > 1,
            'Should be requesting transient params.',
        )

    def test_reboot_without_getting_optional(self) -> None:
        """
        The state machine should not skip figuring out which optional
        parameters are present.
        """
        acs_state_machine = \
            EnodebAcsStateMachineBuilder \
                .build_acs_state_machine(EnodebDeviceName.BAICELLS_OLD)

        # Send an Inform message, wait for an InformResponse
        inform_msg = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(inform_msg)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'Should respond with an InformResponse',
        )

        # And now reboot the eNodeB
        acs_state_machine.transition('reboot')
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(isinstance(resp, models.Reboot))
        req = Tr069MessageBuilder.get_reboot_response()
        resp = acs_state_machine.handle_tr069_message(req)

        # After the reboot has been received, enodebd should end the
        # provisioning session
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'After sending command to reboot the Baicells eNodeB, '
            'enodeb should end the TR-069 session.',
        )

        # At this point, sometime after the eNodeB reboots, we expect it to
        # send an Inform indicating reboot. Since it should be in REM process,
        # we hold off on finishing configuration, and end TR-069 sessions.
        req = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['1 BOOT', 'M Reboot'],
            )
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.DummyInput),
            'After receiving a post-reboot Inform, enodebd '
            'should end TR-069 sessions for 10 minutes to wait '
            'for REM process to finish.',
        )

        # Pretend that we have waited, and now we are in normal operation again
        acs_state_machine.transition('wait_inform_post_reboot')
        req = \
            Tr069MessageBuilder.get_inform(
                '48BF74',
                'BaiStation_V100R001C00B110SPC002',
                '120200002618AGP0003',
                ['2 PERIODIC'],
            )
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.InformResponse),
            'After receiving a post-reboot Inform, enodebd '
            'should end TR-069 sessions for 10 minutes to wait '
            'for REM process to finish.',
        )

        # Since we haven't figured out the presence of optional parameters, the
        # state machine should be requesting them now. There are three for the
        # Baicells state machine.
        req = models.DummyInput()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'enodebd should be requesting params',
        )
        self.assertTrue(
            len(resp.ParameterNames.string) == 1,
            'Should be requesting optional params.',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param',
        )
        self.assertTrue(
            len(resp.ParameterNames.string) == 1,
            'Should be requesting optional params.',
        )
        req = Tr069MessageBuilder.get_fault()
        resp = acs_state_machine.handle_tr069_message(req)
        self.assertTrue(
            isinstance(resp, models.GetParameterValues),
            'State machine should be requesting param',
        )
        self.assertTrue(
            len(resp.ParameterNames.string) == 1,
            'Should be requesting optional params.',
        )