Wei-Yu Chen | ad55cb8 | 2022-02-15 20:07:01 +0800 | [diff] [blame^] | 1 | # SPDX-FileCopyrightText: 2020 The Magma Authors. |
| 2 | # SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org> |
| 3 | # |
| 4 | # SPDX-License-Identifier: BSD-3-Clause |
Wei-Yu Chen | 49950b9 | 2021-11-08 19:19:18 +0800 | [diff] [blame] | 5 | |
| 6 | # pylint: disable=protected-access |
| 7 | from data_models.data_model_parameters import ParameterName |
| 8 | from devices.device_utils import EnodebDeviceName |
| 9 | from tests.test_utils.enb_acs_builder import ( |
| 10 | EnodebAcsStateMachineBuilder, |
| 11 | ) |
| 12 | from tests.test_utils.enodeb_handler import EnodebHandlerTestCase |
| 13 | from tests.test_utils.tr069_msg_builder import Tr069MessageBuilder |
| 14 | from tr069 import models |
| 15 | |
| 16 | |
| 17 | class BaicellsHandlerTests(EnodebHandlerTestCase): |
| 18 | def test_initial_enb_bootup(self) -> None: |
| 19 | """ |
| 20 | Baicells does not support configuration during initial bootup of |
| 21 | eNB device. This is because it is in a REM process, and we just need |
| 22 | to wait for this process to finish, ~10 minutes. Attempting to |
| 23 | configure the device during this period will cause undefined |
| 24 | behavior. |
| 25 | As a result of this, end any provisoning sessions, which we can do |
| 26 | by just sending empty HTTP responses, not even using an |
| 27 | InformResponse. |
| 28 | """ |
| 29 | acs_state_machine = \ |
| 30 | EnodebAcsStateMachineBuilder \ |
| 31 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 32 | |
| 33 | # Send an Inform message |
| 34 | inform_msg = Tr069MessageBuilder.get_inform( |
| 35 | '48BF74', |
| 36 | 'BaiBS_RTS_3.1.6', |
| 37 | '120200002618AGP0003', |
| 38 | ['1 BOOT'], |
| 39 | ) |
| 40 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 41 | |
| 42 | self.assertTrue( |
| 43 | isinstance(resp, models.DummyInput), |
| 44 | 'Should respond with an InformResponse', |
| 45 | ) |
| 46 | |
| 47 | def test_manual_reboot(self) -> None: |
| 48 | """ |
| 49 | Test a scenario where a Magma user goes through the enodebd CLI to |
| 50 | reboot the Baicells eNodeB. |
| 51 | |
| 52 | This checks the scenario where the command is not sent in the middle |
| 53 | of a TR-069 provisioning session. |
| 54 | """ |
| 55 | acs_state_machine = \ |
| 56 | EnodebAcsStateMachineBuilder \ |
| 57 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 58 | |
| 59 | # User uses the CLI tool to get eNodeB to reboot |
| 60 | acs_state_machine.reboot_asap() |
| 61 | |
| 62 | # And now the Inform message arrives from the eNodeB |
| 63 | inform_msg = Tr069MessageBuilder.get_inform( |
| 64 | '48BF74', |
| 65 | 'BaiBS_RTS_3.1.6', |
| 66 | '120200002618AGP0003', |
| 67 | ['2 PERIODIC'], |
| 68 | ) |
| 69 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 70 | self.assertTrue( |
| 71 | isinstance(resp, models.InformResponse), |
| 72 | 'In reboot sequence, state machine should still ' |
| 73 | 'respond to an Inform with InformResponse.', |
| 74 | ) |
| 75 | req = models.DummyInput() |
| 76 | resp = acs_state_machine.handle_tr069_message(req) |
| 77 | self.assertTrue( |
| 78 | isinstance(resp, models.Reboot), |
| 79 | 'In reboot sequence, state machine should send a ' |
| 80 | 'Reboot message.', |
| 81 | ) |
| 82 | req = Tr069MessageBuilder.get_reboot_response() |
| 83 | resp = acs_state_machine.handle_tr069_message(req) |
| 84 | self.assertTrue( |
| 85 | isinstance(resp, models.DummyInput), |
| 86 | 'State machine should end TR-069 session after ' |
| 87 | 'receiving a RebootResponse', |
| 88 | ) |
| 89 | |
| 90 | def test_gps_coords(self) -> None: |
| 91 | """ Check GPS coordinates are processed and stored correctly """ |
| 92 | acs_state_machine = \ |
| 93 | EnodebAcsStateMachineBuilder \ |
| 94 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 95 | |
| 96 | # Send an Inform message, wait for an InformResponse |
| 97 | inform_msg = Tr069MessageBuilder.get_inform( |
| 98 | '48BF74', |
| 99 | 'BaiBS_RTS_3.1.6', |
| 100 | '120200002618AGP0003', |
| 101 | ['2 PERIODIC'], |
| 102 | ) |
| 103 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 104 | self.assertTrue( |
| 105 | isinstance(resp, models.InformResponse), |
| 106 | 'Should respond with an InformResponse', |
| 107 | ) |
| 108 | |
| 109 | # Send an empty http request to kick off the rest of provisioning |
| 110 | req = models.DummyInput() |
| 111 | resp = acs_state_machine.handle_tr069_message(req) |
| 112 | |
| 113 | # Expect a request for an optional parameter, three times |
| 114 | self.assertTrue( |
| 115 | isinstance(resp, models.GetParameterValues), |
| 116 | 'State machine should be requesting param values', |
| 117 | ) |
| 118 | req = models.GetParameterValuesResponse() |
| 119 | param_val_list = [ |
| 120 | Tr069MessageBuilder.get_parameter_value_struct( |
| 121 | name='Device.X_BAICELLS_COM_GpsSyncEnable', |
| 122 | val_type='boolean', |
| 123 | data='true', |
| 124 | ), |
| 125 | ] |
| 126 | req.ParameterList = models.ParameterValueList() |
| 127 | req.ParameterList.ParameterValueStruct = param_val_list |
| 128 | resp = acs_state_machine.handle_tr069_message(req) |
| 129 | |
| 130 | self.assertTrue( |
| 131 | isinstance(resp, models.GetParameterValues), |
| 132 | 'State machine should be requesting param values', |
| 133 | ) |
| 134 | req = models.GetParameterValuesResponse() |
| 135 | param_val_list = [ |
| 136 | Tr069MessageBuilder.get_parameter_value_struct( |
| 137 | name='Device.FAP.GPS.LockedLatitude', |
| 138 | val_type='int', |
| 139 | data='37483629', |
| 140 | ), |
| 141 | ] |
| 142 | req.ParameterList = models.ParameterValueList() |
| 143 | req.ParameterList.ParameterValueStruct = param_val_list |
| 144 | resp = acs_state_machine.handle_tr069_message(req) |
| 145 | |
| 146 | self.assertTrue( |
| 147 | isinstance(resp, models.GetParameterValues), |
| 148 | 'State machine should be requesting param values', |
| 149 | ) |
| 150 | req = models.GetParameterValuesResponse() |
| 151 | param_val_list = [ |
| 152 | Tr069MessageBuilder.get_parameter_value_struct( |
| 153 | name='Device.FAP.GPS.LockedLongitude', |
| 154 | val_type='int', |
| 155 | data='-122150583', |
| 156 | ), |
| 157 | ] |
| 158 | req.ParameterList = models.ParameterValueList() |
| 159 | req.ParameterList.ParameterValueStruct = param_val_list |
| 160 | acs_state_machine.handle_tr069_message(req) |
| 161 | |
| 162 | gps_long = acs_state_machine.get_parameter(ParameterName.GPS_LONG) |
| 163 | gps_lat = acs_state_machine.get_parameter(ParameterName.GPS_LAT) |
| 164 | |
| 165 | self.assertTrue(gps_long == '-122.150583', 'Should be valid longitude') |
| 166 | self.assertTrue(gps_lat == '37.483629', 'Should be valid latitude') |
| 167 | |
| 168 | def test_manual_reboot_during_provisioning(self) -> None: |
| 169 | """ |
| 170 | Test a scenario where a Magma user goes through the enodebd CLI to |
| 171 | reboot the Baicells eNodeB. |
| 172 | |
| 173 | This checks the scenario where the command is sent in the middle |
| 174 | of a TR-069 provisioning session. |
| 175 | """ |
| 176 | acs_state_machine = \ |
| 177 | EnodebAcsStateMachineBuilder \ |
| 178 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 179 | |
| 180 | # Send an Inform message, wait for an InformResponse |
| 181 | inform_msg = Tr069MessageBuilder.get_inform( |
| 182 | '48BF74', |
| 183 | 'BaiBS_RTS_3.1.6', |
| 184 | '120200002618AGP0003', |
| 185 | ['2 PERIODIC'], |
| 186 | ) |
| 187 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 188 | self.assertTrue( |
| 189 | isinstance(resp, models.InformResponse), |
| 190 | 'Should respond with an InformResponse', |
| 191 | ) |
| 192 | |
| 193 | # Send an empty http request to kick off the rest of provisioning |
| 194 | req = models.DummyInput() |
| 195 | resp = acs_state_machine.handle_tr069_message(req) |
| 196 | |
| 197 | # Expect a request for an optional parameter, three times |
| 198 | self.assertTrue( |
| 199 | isinstance(resp, models.GetParameterValues), |
| 200 | 'State machine should be requesting param values', |
| 201 | ) |
| 202 | req = Tr069MessageBuilder.get_fault() |
| 203 | |
| 204 | # User uses the CLI tool to get eNodeB to reboot |
| 205 | acs_state_machine.reboot_asap() |
| 206 | |
| 207 | resp = acs_state_machine.handle_tr069_message(req) |
| 208 | self.assertTrue( |
| 209 | isinstance(resp, models.Reboot), |
| 210 | 'In reboot sequence, state machine should send a ' |
| 211 | 'Reboot message.', |
| 212 | ) |
| 213 | req = Tr069MessageBuilder.get_reboot_response() |
| 214 | resp = acs_state_machine.handle_tr069_message(req) |
| 215 | self.assertTrue( |
| 216 | isinstance(resp, models.DummyInput), |
| 217 | 'State machine should end TR-069 session after ' |
| 218 | 'receiving a RebootResponse', |
| 219 | ) |
| 220 | |
| 221 | def test_missing_param_during_provisioning(self) -> None: |
| 222 | """ |
| 223 | Test the scenario where: |
| 224 | - enodebd is configuring the eNodeB |
| 225 | - eNB does not send all parameters due to bug |
| 226 | """ |
| 227 | acs_state_machine = \ |
| 228 | EnodebAcsStateMachineBuilder \ |
| 229 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 230 | |
| 231 | # Send an Inform message, wait for an InformResponse |
| 232 | inform_msg = Tr069MessageBuilder.get_inform() |
| 233 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 234 | self.assertTrue( |
| 235 | isinstance(resp, models.InformResponse), |
| 236 | 'Should respond with an InformResponse', |
| 237 | ) |
| 238 | |
| 239 | # Send an empty http request to kick off the rest of provisioning |
| 240 | req = models.DummyInput() |
| 241 | resp = acs_state_machine.handle_tr069_message(req) |
| 242 | |
| 243 | # Expect a request for an optional parameter, three times |
| 244 | self.assertTrue( |
| 245 | isinstance(resp, models.GetParameterValues), |
| 246 | 'State machine should be requesting param values', |
| 247 | ) |
| 248 | req = Tr069MessageBuilder.get_fault() |
| 249 | resp = acs_state_machine.handle_tr069_message(req) |
| 250 | self.assertTrue( |
| 251 | isinstance(resp, models.GetParameterValues), |
| 252 | 'State machine should be requesting param values', |
| 253 | ) |
| 254 | req = Tr069MessageBuilder.get_fault() |
| 255 | resp = acs_state_machine.handle_tr069_message(req) |
| 256 | self.assertTrue( |
| 257 | isinstance(resp, models.GetParameterValues), |
| 258 | 'State machine should be requesting param values', |
| 259 | ) |
| 260 | req = Tr069MessageBuilder.get_fault() |
| 261 | resp = acs_state_machine.handle_tr069_message(req) |
| 262 | |
| 263 | # Expect a request for read-only params |
| 264 | self.assertTrue( |
| 265 | isinstance(resp, models.GetParameterValues), |
| 266 | 'State machine should be requesting param values', |
| 267 | ) |
| 268 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 269 | |
| 270 | # Send back some typical values |
| 271 | # And then SM should request regular parameter values |
| 272 | resp = acs_state_machine.handle_tr069_message(req) |
| 273 | self.assertTrue( |
| 274 | isinstance(resp, models.GetParameterValues), |
| 275 | 'State machine should be requesting param values', |
| 276 | ) |
| 277 | |
| 278 | # Send back typical values for the regular parameters |
| 279 | # Pretend that here the NumPLMNs was not sent because of a Baicells bug |
| 280 | req = Tr069MessageBuilder.\ |
| 281 | get_regular_param_values_response( |
| 282 | admin_state=False, |
| 283 | earfcndl=39150, |
| 284 | exclude_num_plmns=True, |
| 285 | ) |
| 286 | resp = acs_state_machine.handle_tr069_message(req) |
| 287 | |
| 288 | # The state machine will fail and go into an error state. |
| 289 | # It will send an empty http response to end the session. |
| 290 | # Regularly, the SM should be using info on the number |
| 291 | # of PLMNs to figure out which object parameter values |
| 292 | # to fetch. |
| 293 | self.assertTrue( |
| 294 | isinstance(resp, models.DummyInput), |
| 295 | 'State machine should be ending session', |
| 296 | ) |
| 297 | |
| 298 | def test_provision_multi_without_invasive_changes(self) -> None: |
| 299 | """ |
| 300 | Test the scenario where: |
| 301 | - eNodeB has already been powered for 10 minutes without configuration |
| 302 | - Setting parameters which are 'non-invasive' on the eNodeB |
| 303 | - Using enodebd mconfig which has old style config with addition |
| 304 | of eNodeB config tied to a serial number |
| 305 | |
| 306 | 'Invasive' parameters are those which require special behavior to apply |
| 307 | the changes for the eNodeB. |
| 308 | """ |
| 309 | acs_state_machine = \ |
| 310 | EnodebAcsStateMachineBuilder \ |
| 311 | .build_multi_enb_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 312 | |
| 313 | # Send an Inform message, wait for an InformResponse |
| 314 | inform_msg = Tr069MessageBuilder.get_inform() |
| 315 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 316 | self.assertTrue( |
| 317 | isinstance(resp, models.InformResponse), |
| 318 | 'Should respond with an InformResponse', |
| 319 | ) |
| 320 | |
| 321 | # Send an empty http request to kick off the rest of provisioning |
| 322 | req = models.DummyInput() |
| 323 | resp = acs_state_machine.handle_tr069_message(req) |
| 324 | |
| 325 | # Expect a request for an optional parameter, three times |
| 326 | self.assertTrue( |
| 327 | isinstance(resp, models.GetParameterValues), |
| 328 | 'State machine should be requesting param values', |
| 329 | ) |
| 330 | req = Tr069MessageBuilder.get_fault() |
| 331 | resp = acs_state_machine.handle_tr069_message(req) |
| 332 | self.assertTrue( |
| 333 | isinstance(resp, models.GetParameterValues), |
| 334 | 'State machine should be requesting param values', |
| 335 | ) |
| 336 | req = Tr069MessageBuilder.get_fault() |
| 337 | resp = acs_state_machine.handle_tr069_message(req) |
| 338 | self.assertTrue( |
| 339 | isinstance(resp, models.GetParameterValues), |
| 340 | 'State machine should be requesting param values', |
| 341 | ) |
| 342 | req = Tr069MessageBuilder.get_fault() |
| 343 | resp = acs_state_machine.handle_tr069_message(req) |
| 344 | |
| 345 | # Expect a request for read-only params |
| 346 | self.assertTrue( |
| 347 | isinstance(resp, models.GetParameterValues), |
| 348 | 'State machine should be requesting param values', |
| 349 | ) |
| 350 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 351 | |
| 352 | # Send back some typical values |
| 353 | # And then SM should request regular parameter values |
| 354 | resp = acs_state_machine.handle_tr069_message(req) |
| 355 | self.assertTrue( |
| 356 | isinstance(resp, models.GetParameterValues), |
| 357 | 'State machine should be requesting param values', |
| 358 | ) |
| 359 | |
| 360 | # Send back typical values for the regular parameters |
| 361 | req = Tr069MessageBuilder.\ |
| 362 | get_regular_param_values_response( |
| 363 | admin_state=False, |
| 364 | earfcndl=39150, |
| 365 | ) |
| 366 | resp = acs_state_machine.handle_tr069_message(req) |
| 367 | |
| 368 | # SM will be requesting object parameter values |
| 369 | self.assertTrue( |
| 370 | isinstance(resp, models.GetParameterValues), |
| 371 | 'State machine should be requesting object param vals', |
| 372 | ) |
| 373 | |
| 374 | # Send back some typical values for object parameters |
| 375 | req = Tr069MessageBuilder.get_object_param_values_response() |
| 376 | resp = acs_state_machine.handle_tr069_message(req) |
| 377 | |
| 378 | # In this scenario, the ACS and thus state machine will not need |
| 379 | # to delete or add objects to the eNB configuration. |
| 380 | # SM should then just be attempting to set parameter values |
| 381 | self.assertTrue( |
| 382 | isinstance(resp, models.SetParameterValues), |
| 383 | 'State machine should be setting param values', |
| 384 | ) |
| 385 | |
| 386 | isEnablingAdminState = False |
| 387 | param = 'Device.Services.FAPService.1.FAPControl.LTE.AdminState' |
| 388 | for name_value in resp.ParameterList.ParameterValueStruct: |
| 389 | if name_value.Name == param: |
| 390 | isEnablingAdminState = True |
| 391 | self.assertTrue( |
| 392 | isEnablingAdminState, |
| 393 | 'eNB config is set to enable transmit, ' |
| 394 | 'while old enodebd config does not ' |
| 395 | 'enable transmit. Use eNB config.', |
| 396 | ) |
| 397 | |
| 398 | def test_provision_without_invasive_changes(self) -> None: |
| 399 | """ |
| 400 | Test the scenario where: |
| 401 | - eNodeB has already been powered for 10 minutes without configuration |
| 402 | - Setting parameters which are 'non-invasive' on the eNodeB |
| 403 | |
| 404 | 'Invasive' parameters are those which require special behavior to apply |
| 405 | the changes for the eNodeB. |
| 406 | """ |
| 407 | acs_state_machine = \ |
| 408 | EnodebAcsStateMachineBuilder \ |
| 409 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 410 | |
| 411 | # Send an Inform message, wait for an InformResponse |
| 412 | inform_msg = Tr069MessageBuilder.get_inform() |
| 413 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 414 | self.assertTrue( |
| 415 | isinstance(resp, models.InformResponse), |
| 416 | 'Should respond with an InformResponse', |
| 417 | ) |
| 418 | |
| 419 | # Send an empty http request to kick off the rest of provisioning |
| 420 | req = models.DummyInput() |
| 421 | resp = acs_state_machine.handle_tr069_message(req) |
| 422 | |
| 423 | # Expect a request for an optional parameter, three times |
| 424 | self.assertTrue( |
| 425 | isinstance(resp, models.GetParameterValues), |
| 426 | 'State machine should be requesting param values', |
| 427 | ) |
| 428 | req = Tr069MessageBuilder.get_fault() |
| 429 | resp = acs_state_machine.handle_tr069_message(req) |
| 430 | self.assertTrue( |
| 431 | isinstance(resp, models.GetParameterValues), |
| 432 | 'State machine should be requesting param values', |
| 433 | ) |
| 434 | req = Tr069MessageBuilder.get_fault() |
| 435 | resp = acs_state_machine.handle_tr069_message(req) |
| 436 | self.assertTrue( |
| 437 | isinstance(resp, models.GetParameterValues), |
| 438 | 'State machine should be requesting param values', |
| 439 | ) |
| 440 | req = Tr069MessageBuilder.get_fault() |
| 441 | resp = acs_state_machine.handle_tr069_message(req) |
| 442 | |
| 443 | # Expect a request for read-only params |
| 444 | self.assertTrue( |
| 445 | isinstance(resp, models.GetParameterValues), |
| 446 | 'State machine should be requesting param values', |
| 447 | ) |
| 448 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 449 | |
| 450 | # Send back some typical values |
| 451 | # And then SM should request regular parameter values |
| 452 | resp = acs_state_machine.handle_tr069_message(req) |
| 453 | self.assertTrue( |
| 454 | isinstance(resp, models.GetParameterValues), |
| 455 | 'State machine should be requesting param values', |
| 456 | ) |
| 457 | |
| 458 | # Send back typical values for the regular parameters |
| 459 | req = Tr069MessageBuilder.\ |
| 460 | get_regular_param_values_response( |
| 461 | admin_state=False, |
| 462 | earfcndl=39150, |
| 463 | ) |
| 464 | resp = acs_state_machine.handle_tr069_message(req) |
| 465 | |
| 466 | # SM will be requesting object parameter values |
| 467 | self.assertTrue( |
| 468 | isinstance(resp, models.GetParameterValues), |
| 469 | 'State machine should be requesting object param vals', |
| 470 | ) |
| 471 | |
| 472 | # Send back some typical values for object parameters |
| 473 | req = Tr069MessageBuilder.get_object_param_values_response() |
| 474 | resp = acs_state_machine.handle_tr069_message(req) |
| 475 | |
| 476 | # In this scenario, the ACS and thus state machine will not need |
| 477 | # to delete or add objects to the eNB configuration. |
| 478 | # SM should then just be attempting to set parameter values |
| 479 | self.assertTrue( |
| 480 | isinstance(resp, models.SetParameterValues), |
| 481 | 'State machine should be setting param values', |
| 482 | ) |
| 483 | |
| 484 | # Send back confirmation that the parameters were successfully set |
| 485 | req = models.SetParameterValuesResponse() |
| 486 | req.Status = 0 |
| 487 | resp = acs_state_machine.handle_tr069_message(req) |
| 488 | |
| 489 | # Expect a request for read-only params |
| 490 | self.assertTrue( |
| 491 | isinstance(resp, models.GetParameterValues), |
| 492 | 'State machine should be requesting param values', |
| 493 | ) |
| 494 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 495 | |
| 496 | # Send back some typical values |
| 497 | # And then SM should continue polling the read-only params |
| 498 | resp = acs_state_machine.handle_tr069_message(req) |
| 499 | self.assertTrue( |
| 500 | isinstance(resp, models.DummyInput), |
| 501 | 'State machine should be ending session', |
| 502 | ) |
| 503 | |
| 504 | # If a different eNB is suddenly plugged in, or the same eNB sends a |
| 505 | # new Inform, enodebd should be able to handle it. |
| 506 | # Send an Inform message, wait for an InformResponse |
| 507 | inform_msg = Tr069MessageBuilder.get_inform() |
| 508 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 509 | self.assertTrue( |
| 510 | isinstance(resp, models.InformResponse), |
| 511 | 'Should respond with an InformResponse', |
| 512 | ) |
| 513 | |
| 514 | # Send an empty http request to kick off the rest of provisioning |
| 515 | req = models.DummyInput() |
| 516 | resp = acs_state_machine.handle_tr069_message(req) |
| 517 | |
| 518 | # Expect a request for an optional parameter, three times |
| 519 | self.assertTrue( |
| 520 | isinstance(resp, models.GetParameterValues), |
| 521 | 'State machine should be requesting param values', |
| 522 | ) |
| 523 | |
| 524 | def test_reboot_after_invasive_changes(self) -> None: |
| 525 | """ |
| 526 | Test the scenario where: |
| 527 | - eNodeB has already been powered for 10 minutes without configuration |
| 528 | - Setting parameters which are 'invasive' on the eNodeB |
| 529 | - Simulate the scenario up until reboot, and test that enodebd does |
| 530 | not try to complete configuration after reboot, because it is |
| 531 | waiting for REM process to finish running |
| 532 | - This test does not wait the ten minutes to simulate REM process |
| 533 | finishing on the Baicells eNodeB |
| 534 | |
| 535 | 'Invasive' parameters are those which require special behavior to apply |
| 536 | the changes for the eNodeB. |
| 537 | |
| 538 | In the case of the Baicells eNodeB, properly applying changes to |
| 539 | invasive parameters requires rebooting the device. |
| 540 | """ |
| 541 | acs_state_machine = \ |
| 542 | EnodebAcsStateMachineBuilder\ |
| 543 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 544 | # Since the test utils pretend the eNB is set to 20MHz, we force this |
| 545 | # to 10 MHz, so the state machine sets this value. |
| 546 | acs_state_machine.mconfig.bandwidth_mhz = 10 |
| 547 | |
| 548 | # Send an Inform message, wait for an InformResponse |
| 549 | inform_msg = Tr069MessageBuilder.get_inform( |
| 550 | '48BF74', |
| 551 | 'BaiBS_RTS_3.1.6', |
| 552 | '120200002618AGP0003', |
| 553 | ['2 PERIODIC'], |
| 554 | ) |
| 555 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 556 | self.assertTrue( |
| 557 | isinstance(resp, models.InformResponse), |
| 558 | 'Should respond with an InformResponse', |
| 559 | ) |
| 560 | |
| 561 | # Send an empty http request to kick off the rest of provisioning |
| 562 | req = models.DummyInput() |
| 563 | resp = acs_state_machine.handle_tr069_message(req) |
| 564 | |
| 565 | # Expect a request for an optional parameter, three times |
| 566 | self.assertTrue( |
| 567 | isinstance(resp, models.GetParameterValues), |
| 568 | 'State machine should be requesting param values', |
| 569 | ) |
| 570 | req = Tr069MessageBuilder.get_fault() |
| 571 | resp = acs_state_machine.handle_tr069_message(req) |
| 572 | self.assertTrue( |
| 573 | isinstance(resp, models.GetParameterValues), |
| 574 | 'State machine should be requesting param values', |
| 575 | ) |
| 576 | req = Tr069MessageBuilder.get_fault() |
| 577 | resp = acs_state_machine.handle_tr069_message(req) |
| 578 | self.assertTrue( |
| 579 | isinstance(resp, models.GetParameterValues), |
| 580 | 'State machine should be requesting param values', |
| 581 | ) |
| 582 | req = Tr069MessageBuilder.get_fault() |
| 583 | resp = acs_state_machine.handle_tr069_message(req) |
| 584 | |
| 585 | # Expect a request for read-only params |
| 586 | self.assertTrue( |
| 587 | isinstance(resp, models.GetParameterValues), |
| 588 | 'State machine should be requesting param values', |
| 589 | ) |
| 590 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 591 | |
| 592 | # Send back some typical values |
| 593 | # And then SM should request regular parameter values |
| 594 | resp = acs_state_machine.handle_tr069_message(req) |
| 595 | self.assertTrue( |
| 596 | isinstance(resp, models.GetParameterValues), |
| 597 | 'State machine should be requesting param values', |
| 598 | ) |
| 599 | |
| 600 | # Send back typical values for the regular parameters |
| 601 | req = Tr069MessageBuilder.get_regular_param_values_response() |
| 602 | resp = acs_state_machine.handle_tr069_message(req) |
| 603 | |
| 604 | # SM will be requesting object parameter values |
| 605 | self.assertTrue( |
| 606 | isinstance(resp, models.GetParameterValues), |
| 607 | 'State machine should be requesting object param vals', |
| 608 | ) |
| 609 | |
| 610 | # Send back some typical values for object parameters |
| 611 | req = Tr069MessageBuilder.get_object_param_values_response() |
| 612 | resp = acs_state_machine.handle_tr069_message(req) |
| 613 | |
| 614 | # In this scenario, the ACS and thus state machine will not need |
| 615 | # to delete or add objects to the eNB configuration. |
| 616 | # SM should then just be attempting to set parameter values |
| 617 | self.assertTrue( |
| 618 | isinstance(resp, models.SetParameterValues), |
| 619 | 'State machine should be setting param values', |
| 620 | ) |
| 621 | |
| 622 | # Send back confirmation that the parameters were successfully set |
| 623 | req = models.SetParameterValuesResponse() |
| 624 | req.Status = 0 |
| 625 | resp = acs_state_machine.handle_tr069_message(req) |
| 626 | |
| 627 | # Since invasive parameters have been set, then to apply the changes |
| 628 | # to the Baicells eNodeB, we need to reboot the device |
| 629 | self.assertTrue(isinstance(resp, models.Reboot)) |
| 630 | req = Tr069MessageBuilder.get_reboot_response() |
| 631 | resp = acs_state_machine.handle_tr069_message(req) |
| 632 | |
| 633 | # After the reboot has been received, enodebd should end the |
| 634 | # provisioning session |
| 635 | self.assertTrue( |
| 636 | isinstance(resp, models.DummyInput), |
| 637 | 'After sending command to reboot the Baicells eNodeB, ' |
| 638 | 'enodeb should end the TR-069 session.', |
| 639 | ) |
| 640 | |
| 641 | # At this point, sometime after the eNodeB reboots, we expect it to |
| 642 | # send an Inform indicating reboot. Since it should be in REM process, |
| 643 | # we hold off on finishing configuration, and end TR-069 sessions. |
| 644 | req = Tr069MessageBuilder.get_inform( |
| 645 | '48BF74', 'BaiBS_RTS_3.1.6', |
| 646 | '120200002618AGP0003', |
| 647 | ['1 BOOT', 'M Reboot'], |
| 648 | ) |
| 649 | resp = acs_state_machine.handle_tr069_message(req) |
| 650 | self.assertTrue( |
| 651 | isinstance(resp, models.DummyInput), |
| 652 | 'After receiving a post-reboot Inform, enodebd ' |
| 653 | 'should end TR-069 sessions for 10 minutes to wait ' |
| 654 | 'for REM process to finish.', |
| 655 | ) |
| 656 | |
| 657 | # Pretend that we have waited, and now we are in normal operation again |
| 658 | acs_state_machine.transition('wait_inform_post_reboot') |
| 659 | req = Tr069MessageBuilder.get_inform( |
| 660 | '48BF74', 'BaiBS_RTS_3.1.6', |
| 661 | '120200002618AGP0003', |
| 662 | ['2 PERIODIC'], |
| 663 | ) |
| 664 | resp = acs_state_machine.handle_tr069_message(req) |
| 665 | self.assertTrue( |
| 666 | isinstance(resp, models.InformResponse), |
| 667 | 'After receiving a post-reboot Inform, enodebd ' |
| 668 | 'should end TR-069 sessions for 10 minutes to wait ' |
| 669 | 'for REM process to finish.', |
| 670 | ) |
| 671 | |
| 672 | req = models.DummyInput() |
| 673 | resp = acs_state_machine.handle_tr069_message(req) |
| 674 | self.assertTrue( |
| 675 | isinstance(resp, models.GetParameterValues), |
| 676 | 'enodebd should be requesting params', |
| 677 | ) |
| 678 | self.assertTrue( |
| 679 | len(resp.ParameterNames.string) > 1, |
| 680 | 'Should be requesting transient params.', |
| 681 | ) |
| 682 | |
| 683 | def test_reboot_without_getting_optional(self) -> None: |
| 684 | """ |
| 685 | The state machine should not skip figuring out which optional |
| 686 | parameters are present. |
| 687 | """ |
| 688 | acs_state_machine = \ |
| 689 | EnodebAcsStateMachineBuilder \ |
| 690 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 691 | |
| 692 | # Send an Inform message, wait for an InformResponse |
| 693 | inform_msg = Tr069MessageBuilder.get_inform( |
| 694 | '48BF74', |
| 695 | 'BaiBS_RTS_3.1.6', |
| 696 | '120200002618AGP0003', |
| 697 | ['2 PERIODIC'], |
| 698 | ) |
| 699 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 700 | self.assertTrue( |
| 701 | isinstance(resp, models.InformResponse), |
| 702 | 'Should respond with an InformResponse', |
| 703 | ) |
| 704 | |
| 705 | # And now reboot the eNodeB |
| 706 | acs_state_machine.transition('reboot') |
| 707 | req = models.DummyInput() |
| 708 | resp = acs_state_machine.handle_tr069_message(req) |
| 709 | self.assertTrue(isinstance(resp, models.Reboot)) |
| 710 | req = Tr069MessageBuilder.get_reboot_response() |
| 711 | resp = acs_state_machine.handle_tr069_message(req) |
| 712 | |
| 713 | # After the reboot has been received, enodebd should end the |
| 714 | # provisioning session |
| 715 | self.assertTrue( |
| 716 | isinstance(resp, models.DummyInput), |
| 717 | 'After sending command to reboot the Baicells eNodeB, ' |
| 718 | 'enodeb should end the TR-069 session.', |
| 719 | ) |
| 720 | |
| 721 | # At this point, sometime after the eNodeB reboots, we expect it to |
| 722 | # send an Inform indicating reboot. Since it should be in REM process, |
| 723 | # we hold off on finishing configuration, and end TR-069 sessions. |
| 724 | req = Tr069MessageBuilder.get_inform( |
| 725 | '48BF74', 'BaiBS_RTS_3.1.6', |
| 726 | '120200002618AGP0003', |
| 727 | ['1 BOOT', 'M Reboot'], |
| 728 | ) |
| 729 | resp = acs_state_machine.handle_tr069_message(req) |
| 730 | self.assertTrue( |
| 731 | isinstance(resp, models.DummyInput), |
| 732 | 'After receiving a post-reboot Inform, enodebd ' |
| 733 | 'should end TR-069 sessions for 10 minutes to wait ' |
| 734 | 'for REM process to finish.', |
| 735 | ) |
| 736 | |
| 737 | # Pretend that we have waited, and now we are in normal operation again |
| 738 | acs_state_machine.transition('wait_inform_post_reboot') |
| 739 | req = Tr069MessageBuilder.get_inform( |
| 740 | '48BF74', 'BaiBS_RTS_3.1.6', |
| 741 | '120200002618AGP0003', |
| 742 | ['2 PERIODIC'], |
| 743 | ) |
| 744 | resp = acs_state_machine.handle_tr069_message(req) |
| 745 | self.assertTrue( |
| 746 | isinstance(resp, models.InformResponse), |
| 747 | 'After receiving a post-reboot Inform, enodebd ' |
| 748 | 'should end TR-069 sessions for 10 minutes to wait ' |
| 749 | 'for REM process to finish.', |
| 750 | ) |
| 751 | |
| 752 | # Since we haven't figured out the presence of optional parameters, the |
| 753 | # state machine should be requesting them now. There are three for the |
| 754 | # Baicells state machine. |
| 755 | req = models.DummyInput() |
| 756 | resp = acs_state_machine.handle_tr069_message(req) |
| 757 | self.assertTrue( |
| 758 | isinstance(resp, models.GetParameterValues), |
| 759 | 'enodebd should be requesting params', |
| 760 | ) |
| 761 | self.assertTrue( |
| 762 | len(resp.ParameterNames.string) == 1, |
| 763 | 'Should be requesting optional params.', |
| 764 | ) |
| 765 | req = Tr069MessageBuilder.get_fault() |
| 766 | resp = acs_state_machine.handle_tr069_message(req) |
| 767 | self.assertTrue( |
| 768 | isinstance(resp, models.GetParameterValues), |
| 769 | 'State machine should be requesting param', |
| 770 | ) |
| 771 | self.assertTrue( |
| 772 | len(resp.ParameterNames.string) == 1, |
| 773 | 'Should be requesting optional params.', |
| 774 | ) |
| 775 | req = Tr069MessageBuilder.get_fault() |
| 776 | resp = acs_state_machine.handle_tr069_message(req) |
| 777 | self.assertTrue( |
| 778 | isinstance(resp, models.GetParameterValues), |
| 779 | 'State machine should be requesting param', |
| 780 | ) |
| 781 | self.assertTrue( |
| 782 | len(resp.ParameterNames.string) == 1, |
| 783 | 'Should be requesting optional params.', |
| 784 | ) |
| 785 | |
| 786 | def test_missing_mme_timeout_handler(self) -> None: |
| 787 | acs_state_machine = \ |
| 788 | EnodebAcsStateMachineBuilder \ |
| 789 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 790 | |
| 791 | # Send an Inform message, wait for an InformResponse |
| 792 | inform_msg = Tr069MessageBuilder.get_inform( |
| 793 | '48BF74', |
| 794 | 'BaiBS_RTS_3.1.6', |
| 795 | '120200002618AGP0003', |
| 796 | ['2 PERIODIC'], |
| 797 | ) |
| 798 | acs_state_machine.handle_tr069_message(inform_msg) |
| 799 | # Send an empty http request to kick off the rest of provisioning |
| 800 | req = models.DummyInput() |
| 801 | acs_state_machine.handle_tr069_message(req) |
| 802 | |
| 803 | acs_state_machine.mme_timeout_handler.cancel() |
| 804 | acs_state_machine.mme_timeout_handler = None |
| 805 | |
| 806 | # Send an Inform message, wait for an InformResponse |
| 807 | inform_msg = Tr069MessageBuilder.get_inform( |
| 808 | '48BF74', |
| 809 | 'BaiBS_RTS_3.1.6', |
| 810 | '120200002618AGP0003', |
| 811 | ['2 PERIODIC'], |
| 812 | ) |
| 813 | acs_state_machine.handle_tr069_message(inform_msg) |
| 814 | |
| 815 | def test_fault_after_set_parameters(self) -> None: |
| 816 | acs_state_machine = \ |
| 817 | EnodebAcsStateMachineBuilder \ |
| 818 | .build_acs_state_machine(EnodebDeviceName.BAICELLS) |
| 819 | |
| 820 | # Send an Inform message, wait for an InformResponse |
| 821 | inform_msg = Tr069MessageBuilder.get_inform( |
| 822 | '48BF74', |
| 823 | 'BaiBS_RTS_3.1.6', |
| 824 | '120200002618AGP0003', |
| 825 | ['2 PERIODIC'], |
| 826 | ) |
| 827 | resp = acs_state_machine.handle_tr069_message(inform_msg) |
| 828 | self.assertTrue( |
| 829 | isinstance(resp, models.InformResponse), |
| 830 | 'Should respond with an InformResponse', |
| 831 | ) |
| 832 | |
| 833 | # Send an empty http request to kick off the rest of provisioning |
| 834 | req = models.DummyInput() |
| 835 | resp = acs_state_machine.handle_tr069_message(req) |
| 836 | |
| 837 | # Expect a request for an optional parameter, three times |
| 838 | self.assertTrue( |
| 839 | isinstance(resp, models.GetParameterValues), |
| 840 | 'State machine should be requesting param values', |
| 841 | ) |
| 842 | req = Tr069MessageBuilder.get_fault() |
| 843 | resp = acs_state_machine.handle_tr069_message(req) |
| 844 | self.assertTrue( |
| 845 | isinstance(resp, models.GetParameterValues), |
| 846 | 'State machine should be requesting param values', |
| 847 | ) |
| 848 | req = Tr069MessageBuilder.get_fault() |
| 849 | resp = acs_state_machine.handle_tr069_message(req) |
| 850 | self.assertTrue( |
| 851 | isinstance(resp, models.GetParameterValues), |
| 852 | 'State machine should be requesting param values', |
| 853 | ) |
| 854 | req = Tr069MessageBuilder.get_fault() |
| 855 | resp = acs_state_machine.handle_tr069_message(req) |
| 856 | |
| 857 | # Expect a request for read-only params |
| 858 | self.assertTrue( |
| 859 | isinstance(resp, models.GetParameterValues), |
| 860 | 'State machine should be requesting param values', |
| 861 | ) |
| 862 | req = Tr069MessageBuilder.get_read_only_param_values_response() |
| 863 | |
| 864 | # Send back some typical values |
| 865 | # And then SM should request regular parameter values |
| 866 | resp = acs_state_machine.handle_tr069_message(req) |
| 867 | self.assertTrue( |
| 868 | isinstance(resp, models.GetParameterValues), |
| 869 | 'State machine should be requesting param values', |
| 870 | ) |
| 871 | |
| 872 | # Send back typical values for the regular parameters |
| 873 | req = Tr069MessageBuilder.get_regular_param_values_response() |
| 874 | resp = acs_state_machine.handle_tr069_message(req) |
| 875 | |
| 876 | # SM will be requesting object parameter values |
| 877 | self.assertTrue( |
| 878 | isinstance(resp, models.GetParameterValues), |
| 879 | 'State machine should be requesting object param vals', |
| 880 | ) |
| 881 | |
| 882 | # Send back some typical values for object parameters |
| 883 | req = Tr069MessageBuilder.get_object_param_values_response() |
| 884 | resp = acs_state_machine.handle_tr069_message(req) |
| 885 | |
| 886 | # In this scenario, the ACS and thus state machine will not need |
| 887 | # to delete or add objects to the eNB configuration. |
| 888 | # SM should then just be attempting to set parameter values |
| 889 | self.assertTrue( |
| 890 | isinstance(resp, models.SetParameterValues), |
| 891 | 'State machine should be setting param values', |
| 892 | ) |
| 893 | |
| 894 | req = models.Fault() |
| 895 | req.FaultCode = 12345 |
| 896 | req.FaultString = 'Test FaultString' |
| 897 | acs_state_machine.handle_tr069_message(req) |
| 898 | self.assertTrue( |
| 899 | 'Error' in acs_state_machine.get_state(), |
| 900 | 'Should be in error state', |
| 901 | ) |
| 902 | |
| 903 | def test_autoremediation_from_fault(self): |
| 904 | """ |
| 905 | Transition the state machine into the unexpected fault state, then |
| 906 | verify that it transitions itself back to WaitInform after an Inform |
| 907 | is received. |
| 908 | """ |
| 909 | sm = EnodebAcsStateMachineBuilder.build_acs_state_machine( |
| 910 | EnodebDeviceName.BAICELLS, |
| 911 | ) |
| 912 | |
| 913 | # Send an initial inform |
| 914 | inform_msg = Tr069MessageBuilder.get_inform( |
| 915 | '48BF74', |
| 916 | 'BaiBS_RTS_3.1.6', |
| 917 | '120200002618AGP0003', |
| 918 | ['2 PERIODIC'], |
| 919 | ) |
| 920 | resp = sm.handle_tr069_message(inform_msg) |
| 921 | self.assertTrue( |
| 922 | isinstance(resp, models.InformResponse), |
| 923 | 'Should respond with an InformResponse', |
| 924 | ) |
| 925 | |
| 926 | # Now send a fault |
| 927 | req = models.Fault() |
| 928 | req.FaultCode = 12345 |
| 929 | req.FaultString = 'Test FaultString' |
| 930 | sm.handle_tr069_message(req) |
| 931 | self.assertTrue('Error' in sm.get_state(), 'Should be in error state') |
| 932 | |
| 933 | # Send the Inform again, verify SM transitions out of fault |
| 934 | resp = sm.handle_tr069_message(inform_msg) |
| 935 | self.assertTrue(isinstance(resp, models.DummyInput)) |
| 936 | self.assertEqual('Waiting for an Inform', sm.get_state()) |