tests/configuration_init_tests.py

# SPDX-FileCopyrightText: 2020 The Magma Authors.
# SPDX-FileCopyrightText: 2022 Open Networking Foundation <support@opennetworking.org>
#
# SPDX-License-Identifier: BSD-3-Clause

# pylint: disable=protected-access
from unittest import TestCase

from data_models.data_model_parameters import ParameterName
from device_config.configuration_init import (
    _get_enb_config,
    _set_bandwidth,
    _set_earfcn_freq_band_mode,
    _set_management_server,
    _set_misc_static_params,
    _set_pci,
    _set_perf_mgmt,
    _set_plmnids_tac,
    _set_s1_connection,
    _set_tdd_subframe_config,
)
from device_config.enodeb_configuration import EnodebConfiguration
from devices.baicells import BaicellsTrDataModel
from exceptions import ConfigurationError
from tests.test_utils.config_builder import EnodebConfigBuilder


class EnodebConfigurationFactoryTest(TestCase):

    def setUp(self):
        self.data_model = BaicellsTrDataModel()
        self.cfg = EnodebConfiguration(BaicellsTrDataModel())
        self.device_cfg = EnodebConfiguration(BaicellsTrDataModel())

    def tearDown(self):
        self.data_model = None
        self.cfg = None
        self.device_cfg = None

    def test_set_pci(self):
        pci = 3
        _set_pci(self.cfg, pci)
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.PCI1), pci,
            'PCI value should be same as what was set',
        )
        with self.assertRaises(ConfigurationError):
            _set_pci(self.cfg, 505)

    def test_set_bandwidth(self):
        mhz = 15
        _set_bandwidth(self.cfg, self.data_model, mhz)
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.DL_BANDWIDTH),
            mhz,
            'Should have set %s' % ParameterName.DL_BANDWIDTH,
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.UL_BANDWIDTH),
            mhz,
            'Should have set %s' % ParameterName.UL_BANDWIDTH,
        )

    def test_set_tdd_subframe_config(self):
        # Not TDD mode, should not try to set anything
        self.device_cfg.set_parameter(
            ParameterName.DUPLEX_MODE_CAPABILITY, 'Not TDDMode',
        )
        subframe = 0
        special_subframe = 0
        _set_tdd_subframe_config(
            self.device_cfg, self.cfg, subframe,
            special_subframe,
        )
        self.assertTrue(
            ParameterName.SUBFRAME_ASSIGNMENT not in
            self.cfg.get_parameter_names(),
        )

        # Invalid subframe assignment
        self.device_cfg.set_parameter(
            ParameterName.DUPLEX_MODE_CAPABILITY, 'TDDMode',
        )
        _set_tdd_subframe_config(
            self.device_cfg, self.cfg, subframe,
            special_subframe,
        )
        self.assertIn(
            ParameterName.SUBFRAME_ASSIGNMENT,
            self.cfg.get_parameter_names(),
            'Expected a subframe assignment',
        )

    def test_set_management_server(self):
        _set_management_server(self.cfg)
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.PERIODIC_INFORM_ENABLE),
            True, 'Expected periodic inform enable to be true',
        )
        self.assertTrue(
            isinstance(
                self.cfg.get_parameter(ParameterName.PERIODIC_INFORM_INTERVAL),
                int,
            ),
            'Expected periodic inform interval to ani integer',
        )

    def test_set_s1_connection(self):
        invalid_mme_ip = 1234
        invalid_mme_port = '8080'
        mme_ip = '192.168.0.1'
        mme_port = 8080

        # MME IP should be a string
        with self.assertRaises(ConfigurationError):
            _set_s1_connection(self.cfg, invalid_mme_ip, mme_port)

        # MME Port should be an integer
        with self.assertRaises(ConfigurationError):
            _set_s1_connection(self.cfg, mme_ip, invalid_mme_port)

        # Check the ip and port are sort properly
        _set_s1_connection(self.cfg, mme_ip, mme_port)
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.MME_ADDRESS), mme_ip,
            'Expected mme ip to be set',
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.MME_PORT), mme_port,
            'Expected mme port to be set',
        )

    def test_set_perf_mgmt(self):
        mgmt_ip = '192.168.0.1'
        mgmt_upload_interval = 300
        mgmt_port = 8080
        _set_perf_mgmt(self.cfg, mgmt_ip, mgmt_port)
        self.assertTrue(
            self.cfg.get_parameter(ParameterName.PERF_MGMT_ENABLE),
            'Expected perf mgmt to be enabled',
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.PERF_MGMT_UPLOAD_INTERVAL),
            mgmt_upload_interval, 'Expected upload interval to be set',
        )
        expected_url = 'http://192.168.0.1:8080/'
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.PERF_MGMT_UPLOAD_URL),
            expected_url, 'Incorrect Url',
        )

    def test_set_misc_static_params(self):
        # IPSec enable as integer
        self.device_cfg.set_parameter(ParameterName.IP_SEC_ENABLE, 0)
        self.data_model.set_parameter_presence(ParameterName.GPS_ENABLE, True)
        _set_misc_static_params(self.device_cfg, self.cfg, self.data_model)
        self.assertTrue(
            isinstance(
                self.cfg.get_parameter(ParameterName.IP_SEC_ENABLE), int,
            ),
            'Should support an integer IP_SEC_ENABLE parameter',
        )

        # IPSec enable as boolean
        self.device_cfg.set_parameter(ParameterName.IP_SEC_ENABLE, 'False')
        _set_misc_static_params(self.device_cfg, self.cfg, self.data_model)
        self.assertTrue(
            isinstance(
                self.cfg.get_parameter(ParameterName.IP_SEC_ENABLE), bool,
            ),
            'Should support a boolean IP_SEC_ENABLE parameter',
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.LOCAL_GATEWAY_ENABLE), 0,
            'Should be disabled',
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.CELL_RESERVED), False,
            'Should be disabled',
        )
        self.assertEqual(
            self.cfg.get_parameter(ParameterName.MME_POOL_ENABLE), False,
            'Should be disabled',
        )

    def test_set_plmnids_tac(self):
        # We only handle a single PLMNID for now
        plmnids = '1, 2, 3, 4'
        tac = 1
        with self.assertRaises(ConfigurationError):
            _set_plmnids_tac(self.cfg, plmnids, tac)

        # Max PLMNID length is 6 characters
        plmnids = '1234567'
        with self.assertRaises(ConfigurationError):
            _set_plmnids_tac(self.cfg, plmnids, tac)

        # Check that only one PLMN element is enabled
        plmnids = '1'
        _set_plmnids_tac(self.cfg, plmnids, tac)
        self.assertTrue(
            self.cfg.get_parameter_for_object(
                ParameterName.PLMN_N_ENABLE % 1, ParameterName.PLMN_N % 1,
            ),
            'First PLMN should be enabled',
        )
        self.assertFalse(
            self.cfg.has_object(ParameterName.PLMN_N % 2),
            'Second PLMN should be disabled',
        )

    def test_set_earafcn_freq_band_mode(self):
        # Invalid earfcndl
        with self.assertRaises(ConfigurationError):
            invalid_earfcndl = -1
            _set_earfcn_freq_band_mode(
                self.device_cfg, self.cfg,
                self.data_model, invalid_earfcndl,
            )

        # Duplex_mode is TDD but capability is FDD
        with self.assertRaises(ConfigurationError):
            self.device_cfg.set_parameter(
                ParameterName.DUPLEX_MODE_CAPABILITY, 'FDDMode',
            )
            earfcndl = 38650  # Corresponds to TDD
            _set_earfcn_freq_band_mode(
                self.device_cfg, self.cfg,
                self.data_model, earfcndl,
            )

        # Duplex_mode is FDD but capability is TDD
        with self.assertRaises(ConfigurationError):
            self.device_cfg.set_parameter(
                ParameterName.DUPLEX_MODE_CAPABILITY, 'TDDMode',
            )
            earfcndl = 0  # Corresponds to FDD
            _set_earfcn_freq_band_mode(
                self.device_cfg, self.cfg,
                self.data_model, earfcndl,
            )

    def test_get_enb_config(self):
        mconfig = EnodebConfigBuilder.get_mconfig()
        enb_config = _get_enb_config(mconfig, self.device_cfg)
        self.assertTrue(
            enb_config.earfcndl == 39150,
            "Should give earfcndl from default eNB config",
        )

        mconfig = EnodebConfigBuilder.get_multi_enb_mconfig()
        self.device_cfg.set_parameter(
            ParameterName.SERIAL_NUMBER,
            '120200002618AGP0003',
        )
        enb_config = _get_enb_config(mconfig, self.device_cfg)
        self.assertTrue(
            enb_config.earfcndl == 39151,
            "Should give earfcndl from specific eNB config",
        )