| """ |
| Check README file |
| """ |
| import Queue |
| |
| import itertools |
| from oftest import config |
| import inspect |
| import logging |
| import oftest.base_tests as base_tests |
| import ofp |
| from oftest.testutils import * |
| from accton_util import * |
| from utils import * |
| import time |
| |
| class PacketInICMPv6( base_tests.SimpleDataPlane ): |
| """ |
| Verify ACL rule for ICMPv6 packet. The expected behavior is |
| Packet-In message in the control plane. |
| """ |
| |
| def runTest( self ): |
| try: |
| # We insert an ACL rule for ICMPv6 |
| add_acl_rule( |
| self.controller, |
| eth_type=0x86dd, |
| ip_proto=0x3A, |
| send_barrier=False |
| ) |
| |
| ports = config[ "port_map" ].keys( ) |
| for in_port in ports: |
| # Neighbor solicitation |
| parsed_icmpv6_pkt = simple_icmpv6_packet(icmp_type=135) |
| icmpv6_pkt = str( parsed_icmpv6_pkt ) |
| self.dataplane.send(in_port, icmpv6_pkt) |
| verify_packet_in(self, icmpv6_pkt, in_port, ofp.OFPR_ACTION) |
| verify_no_other_packets( self ) |
| # Neighbor advertisement |
| parsed_icmpv6_pkt = simple_icmpv6_packet(icmp_type=136) |
| icmpv6_pkt = str( parsed_icmpv6_pkt ) |
| self.dataplane.send(in_port, icmpv6_pkt) |
| verify_packet_in(self, icmpv6_pkt, in_port, ofp.OFPR_ACTION) |
| verify_no_other_packets( self ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_all_groups( self.controller ) |
| |
| class PacketInIPv6Table( base_tests.SimpleDataPlane ): |
| """ |
| Verify Packet-in message from IP table when controller action is used |
| Send a packet to each dataplane port and verify that a packet |
| in message is received from the controller for each |
| #todo verify you stop receiving after adding rule |
| """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0x22, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| vlan_id = in_port |
| dst_mac[ 5 ] = vlan_id |
| dst_ip = dip % in_port |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff::", |
| action_group_id=None, |
| vrf=0, |
| send_ctrl=True, |
| send_barrier=False |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=dst_mac, |
| vlanid=vlan_id |
| ) |
| # add vlan table flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| out_vlan_id=1, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| |
| for port in ports: |
| vlan_id = port |
| dst_mac[ 5 ] = vlan_id |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| dip_str = dip % port |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| dl_vlan_enable=True, |
| vlan_vid=vlan_id, |
| ipv6_dst=dip_str, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(port, tcpv6_pkt) |
| verify_packet_in(self, tcpv6_pkt, port, ofp.OFPR_ACTION) |
| verify_no_other_packets( self ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_all_groups( self.controller ) |
| |
| class _128UcastUnTagged( base_tests.SimpleDataPlane ): |
| """ Verify /128 IP forwarding to L3 Interface""" |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups._put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups._put( l3_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", |
| action_group_id=l3_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id, |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _128ECMPVpn( base_tests.SimpleDataPlane ): |
| """ Verify MPLS IP VPN Initiation from /128 rule using ECMP """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| mpls_label = 255 |
| label = (mpls_label, 0, 1, 63) |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups.put(l2gid) |
| mpls_gid, mpls_msg = add_mpls_intf_group( |
| ctrl=self.controller, |
| ref_gid=l2gid, |
| dst_mac=dst_mac, |
| src_mac=intf_src_mac, |
| vid=vlan_id, |
| index=out_port, |
| send_barrier=True |
| ) |
| Groups.put( mpls_gid ) |
| # add MPLS L3 VPN group |
| mpls_label_gid, mpls_label_msg = add_mpls_label_group( |
| ctrl=self.controller, |
| subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, |
| index=out_port, |
| ref_gid=mpls_gid, |
| push_mpls_header=True, |
| set_mpls_label=mpls_label, |
| set_bos=1, |
| cpy_ttl_outward=True, |
| send_barrier=True |
| ) |
| Groups.put( mpls_label_gid ) |
| # Add ECMP group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=vlan_id, |
| l3_ucast_groups=[ mpls_label_gid ], |
| send_barrier=True |
| ) |
| Groups.put( ecmp_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", |
| action_group_id=ecmp_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_mplsv6_pkt = mplsv6_packet( |
| pktlen=104, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63, |
| label=[ label ] |
| ) |
| mplsv6_pkt = str( parsed_mplsv6_pkt ) |
| verify_packet(self, mplsv6_pkt, out_port ) |
| verify_no_packet(self, mplsv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _128ECMPL3( base_tests.SimpleDataPlane ): |
| """ Verifies /128 IP routing and ECMP """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups.put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups.put( l3_msg.group_id ) |
| # Add ECMP group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=vlan_id, |
| l3_ucast_groups=[ l3_msg.group_id ], |
| send_barrier=True |
| ) |
| Groups.put( ecmp_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff", |
| action_group_id=ecmp_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| print "END" |
| #delete_all_flows( self.controller ) |
| #delete_groups( self.controller, Groups ) |
| #delete_all_groups( self.controller ) |
| |
| class _64UcastUntagged( base_tests.SimpleDataPlane ): |
| """ Verify /64 IP forwarding to L3 Interface""" |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups._put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups._put( l3_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff::", |
| action_group_id=l3_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id, |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _64ECMPVpn( base_tests.SimpleDataPlane ): |
| """ Verify MPLS IP VPN Initiation from /64 rule using ECMP """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| mpls_label = 255 |
| label = (mpls_label, 0, 1, 63) |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups.put(l2gid) |
| mpls_gid, mpls_msg = add_mpls_intf_group( |
| ctrl=self.controller, |
| ref_gid=l2gid, |
| dst_mac=dst_mac, |
| src_mac=intf_src_mac, |
| vid=vlan_id, |
| index=out_port, |
| send_barrier=True |
| ) |
| Groups.put( mpls_gid ) |
| # add MPLS L3 VPN group |
| mpls_label_gid, mpls_label_msg = add_mpls_label_group( |
| ctrl=self.controller, |
| subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, |
| index=out_port, |
| ref_gid=mpls_gid, |
| push_mpls_header=True, |
| set_mpls_label=mpls_label, |
| set_bos=1, |
| cpy_ttl_outward=True, |
| send_barrier=True |
| ) |
| Groups.put( mpls_label_gid ) |
| # Add ECMP group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=vlan_id, |
| l3_ucast_groups=[ mpls_label_gid ], |
| send_barrier=True |
| ) |
| Groups.put( ecmp_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff::", |
| action_group_id=ecmp_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_mplsv6_pkt = mplsv6_packet( |
| pktlen=104, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63, |
| label=[ label ] |
| ) |
| mplsv6_pkt = str( parsed_mplsv6_pkt ) |
| verify_packet(self, mplsv6_pkt, out_port ) |
| verify_no_packet(self, mplsv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _64ECMPL3( base_tests.SimpleDataPlane ): |
| """ Verifies /64 IP routing and ECMP """ |
| |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups.put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups.put( l3_msg.group_id ) |
| # Add ECMP group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=vlan_id, |
| l3_ucast_groups=[ l3_msg.group_id ], |
| send_barrier=True |
| ) |
| Groups.put( ecmp_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip=dst_ip, |
| mask="ffff:ffff:ffff:ffff::", |
| action_group_id=ecmp_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| out_vlan_id=1, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| out_vlan_id=1, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _0UcastV6( base_tests.SimpleDataPlane ): |
| """ Verify default gateway IP forwarding to L3 Interface ( /0 rule ) """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups._put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups._put( l3_msg.group_id ) |
| # We fill the unicast_table |
| add_unicast_v6_routing_flow( |
| ctrl=self.controller, |
| eth_type=0x86dd, |
| dst_ip="::", |
| mask="::", |
| action_group_id=l3_msg.group_id, |
| vrf=0, |
| send_ctrl=False, |
| send_barrier=True |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x86dd, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id, |
| ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| self.dataplane.send(in_port, tcpv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class _MPLSTerminationV6( base_tests.SimpleDataPlane ): |
| """ Verify MPLS termination with IPv6 traffic """ |
| |
| def runTest( self ): |
| try: |
| |
| if len( config[ "port_map" ] ) < 2: |
| logging.info( "Port count less than 2, can't run this case" ) |
| return |
| |
| Groups = Queue.LifoQueue( ) |
| r_dst_mac = [ 0x00, 0x00, 0x00, 0xa2, 0x22, 0x00 ] |
| dst_mac = [ 0x00, 0x00, 0x00, 0x22, 0xa2, 0x00 ] |
| intf_src_mac = [ 0x00, 0x00, 0x00, 0xcc, 0xcc, 0x00 ] |
| # We are assuming that the port number are xx" |
| dip = "2000::%s" |
| sip = "2000::1" |
| ports = config[ "port_map" ].keys( ) |
| vlan_id = 4094 |
| mpls_label = 255 |
| label = (mpls_label, 0, 1, 64) |
| |
| in_port = ports[0] |
| out_port = ports[1] |
| r_dst_mac[5] = in_port |
| intf_src_mac[5] = out_port |
| dst_mac[5] = out_port |
| dst_ip = dip % in_port |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| r_dst_mac_str = ':'.join( [ '%02X' % x for x in r_dst_mac ] ) |
| intf_src_mac_str = ':'.join( [ '%02X' % x for x in intf_src_mac ] ) |
| # We create the L2 group |
| l2gid, msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=vlan_id, |
| is_tagged=False, |
| send_barrier=True |
| ) |
| Groups.put(l2gid) |
| # We create the L3 group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=vlan_id, |
| id=vlan_id, |
| src_mac=intf_src_mac, |
| dst_mac=dst_mac, |
| send_barrier=True |
| ) |
| Groups.put( l3_msg.group_id ) |
| # Add ECMP group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=vlan_id, |
| l3_ucast_groups=[ l3_msg.group_id ], |
| send_barrier=True |
| ) |
| Groups.put( ecmp_msg.group_id ) |
| # add filtering flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG |
| ) |
| # add assignment flow |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=vlan_id, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| # add termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x8847, |
| dst_mac=r_dst_mac, |
| vlanid=vlan_id, |
| goto_table=24 |
| ) |
| # We fill the mpls flow table 1 |
| add_mpls_flow( |
| ctrl=self.controller, |
| action_group_id=ecmp_msg.group_id, |
| label=mpls_label, |
| send_barrier=True |
| ) |
| |
| parsed_mplsv6_pkt = mplsv6_packet( |
| pktlen=104, |
| eth_dst=r_dst_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| label=[ label ] |
| ) |
| mplsv6_pkt = str( parsed_mplsv6_pkt ) |
| self.dataplane.send(in_port, mplsv6_pkt) |
| parsed_tcpv6_pkt = simple_tcpv6_packet( |
| pktlen=100, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ipv6_dst=dst_ip, |
| ipv6_src=sip, |
| ipv6_hlim=63 |
| ) |
| tcpv6_pkt = str( parsed_tcpv6_pkt ) |
| verify_packet(self, tcpv6_pkt, out_port ) |
| verify_no_packet(self, tcpv6_pkt, in_port ) |
| verify_no_other_packets(self) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |