| """ | |
| Flow Test | |
| Test each flow table can set entry, and packet rx correctly. | |
| """ | |
| import logging | |
| from oftest import config | |
| import oftest.base_tests as base_tests | |
| import ofp | |
| from oftest.testutils import * | |
| from accton_util import * | |
| import oftest.parse as decode | |
| class VxlanConfigNetconf(base_tests.SimpleDataPlane): | |
| """ | |
| Verify netconf to configure Vxlan port | |
| """ | |
| def runTest(self): | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| #paramaters | |
| access_port_vid=1 | |
| access_phy_port=1 | |
| access_lport=0x10001 | |
| vnid=103 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=2 | |
| network_lport=0x10002 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| xml_before=get_edit_config(config["switch_ip"]) | |
| #get datapath_id from feature message | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, | |
| mcast_ipv4=mcast_ipv4, | |
| next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| get_edit_config(config["switch_ip"]) | |
| #exit verification so clear all configuration | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, | |
| mcast_ipv4=mcast_ipv4, | |
| next_hop_id=next_hop_id_mcast, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| xml_after=get_edit_config(config["switch_ip"]) | |
| assert(xml_before == xml_after) | |
| class OverlayFloodGroup(base_tests.SimpleDataPlane): | |
| """ | |
| create two lport | |
| """ | |
| def runTest(self): | |
| """ | |
| first verify flood over unicast, | |
| second verify flood over mcast | |
| """ | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| #paramaters | |
| access_port_vid=1 | |
| access_phy_port=1 | |
| access_lport=0x10001 | |
| vnid=103 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=2 | |
| network_lport=0x10002 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #add flow over unicast group | |
| msg=add_l2_overlay_flood_over_unicast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1) | |
| #verify | |
| stats = get_stats(self, ofp.message.group_desc_stats_request()) | |
| verify_group_stats=(ofp.group_desc_stats_entry( | |
| group_type=msg.group_type, | |
| group_id=msg.group_id, | |
| buckets=msg.buckets)) | |
| self.assertEquals(stats, [verify_group_stats]) | |
| #clear all group | |
| delete_all_groups(self.controller) | |
| # | |
| #flood over mcast | |
| msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1) | |
| stats = get_stats(self, ofp.message.group_desc_stats_request()) | |
| verify_group_stats=(ofp.group_desc_stats_entry( | |
| group_type=msg.group_type, | |
| group_id=msg.group_id, | |
| buckets=msg.buckets)) | |
| self.assertEquals(stats, [verify_group_stats]) | |
| #clear all group | |
| delete_all_groups(self.controller) | |
| #exit verification so clear all configuration | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class OverlayMcastGroup(base_tests.SimpleDataPlane): | |
| """ | |
| create two lport | |
| """ | |
| def runTest(self): | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| #paramaters | |
| access_port_vid=1 | |
| access_phy_port=1 | |
| access_lport=0x10001 | |
| vnid=103 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=2 | |
| network_lport=0x10002 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport, access_phy_port, access_port_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #add flow over unicast group | |
| msg=msg=add_l2_overlay_mcast_over_unicast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1) | |
| #verify | |
| stats = get_stats(self, ofp.message.group_desc_stats_request()) | |
| verify_group_stats=(ofp.group_desc_stats_entry( | |
| group_type=msg.group_type, | |
| group_id=msg.group_id, | |
| buckets=msg.buckets)) | |
| self.assertEquals(stats, [verify_group_stats]) | |
| #clear all group | |
| delete_all_groups(self.controller) | |
| # | |
| #flood over mcast | |
| msg=add_l2_overlay_mcast_over_mcast_tunnel_group(self.controller, vnid, [access_lport, network_lport], 1) | |
| stats = get_stats(self, ofp.message.group_desc_stats_request()) | |
| verify_group_stats=(ofp.group_desc_stats_entry( | |
| group_type=msg.group_type, | |
| group_id=msg.group_id, | |
| buckets=msg.buckets)) | |
| self.assertEquals(stats, [verify_group_stats]) | |
| #clear all group | |
| delete_all_groups(self.controller) | |
| #exit verification so clear all configuration | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport, phy_port=access_phy_port, | |
| vlan=access_port_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class AccessToNetworkDLFMcast(base_tests.SimpleDataPlane): | |
| def runTest(self): | |
| """ | |
| first verify flood over unicast, | |
| second verify flood over mcast | |
| """ | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| access_port1_vid=1 | |
| access_phy_port1=config["port_map"].keys()[0] | |
| access_lport1=0x10001 | |
| access_port2_vid=0 | |
| access_phy_port2=config["port_map"].keys()[1] | |
| access_lport2=0x10002 | |
| vnid=10 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=config["port_map"].keys()[2] | |
| network_lport=0x10003 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #get_edit_config(config["switch_ip"]) | |
| #add port table to have vxlan ability | |
| add_port_table_flow(self.controller) | |
| #for network port need l2 interface group to decide vlan tag or not | |
| add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan) | |
| #add DLF bridge flow | |
| msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, network_lport], 1) | |
| add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True) | |
| #send packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port2) | |
| #vxlan packet IP header have some parmater decide by HW, | |
| #we can easy to check VxLAN IP header | |
| verify_packet(self, pkt, network_port_phy_port) | |
| verify_no_other_packets(self) | |
| add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, network_lport, False, True) | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on network port | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, network_port_phy_port) | |
| verify_no_other_packets(self) | |
| #exit verification so clear all configuration | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class AccessToNetworkDLFUcast(base_tests.SimpleDataPlane): | |
| def runTest(self): | |
| """ | |
| first verify flood over unicast, | |
| second verify flood over mcast | |
| """ | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| access_port1_vid=1 | |
| access_phy_port1=config["port_map"].keys()[0] | |
| access_lport1=0x10001 | |
| access_port2_vid=0 | |
| access_phy_port2=config["port_map"].keys()[1] | |
| access_lport2=0x10002 | |
| vnid=10 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=config["port_map"].keys()[2] | |
| network_lport=0x10003 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #get_edit_config(config["switch_ip"]) | |
| #add port table to have vxlan ability | |
| add_port_table_flow(self.controller) | |
| #for network port need l2 interface group to decide vlan tag or not | |
| add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan) | |
| #add DLF bridge flow | |
| msg=add_l2_overlay_flood_over_unicast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, network_lport], 1) | |
| add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True) | |
| #send packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port2) | |
| #vxlan packet IP header have some parmater decide by HW, | |
| #we can easy to check VxLAN IP header | |
| verify_packet(self, pkt, network_port_phy_port) | |
| verify_no_other_packets(self) | |
| add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, network_lport, False, True) | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on network port | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, network_port_phy_port) | |
| verify_no_other_packets(self) | |
| #exit verification so clear all configuration | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class AccessWithAccess(base_tests.SimpleDataPlane): | |
| def runTest(self): | |
| """ | |
| first verify flood over unicast, | |
| second verify flood over mcast | |
| """ | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| access_port1_vid=1 | |
| access_phy_port1=config["port_map"].keys()[0] | |
| access_lport1=0x10001 | |
| access_port2_vid=0 | |
| access_phy_port2=config["port_map"].keys()[1] | |
| access_lport2=0x10002 | |
| access_port3_vid=3 | |
| access_phy_port3=config["port_map"].keys()[2] | |
| access_lport3=0x10003 | |
| vnid=10 | |
| next_hop_id_mcast=1 | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| feature_reply=get_featureReplay(self) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=access_phy_port3, | |
| vlan=access_port3_vid) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, access_phy_port3, access_port3_vid); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport3, phy_port=access_phy_port3, | |
| vlan=access_port3_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| #add port table to have vxlan ability | |
| add_port_table_flow(self.controller) | |
| #add DLF bridge flow | |
| msg=add_l2_overlay_flood_over_mcast_tunnel_group(self.controller, vnid, [access_lport1, access_lport2, access_lport3], 1) | |
| add_overlay_bridge_flow(self.controller, None, vnid, msg.group_id, True, True) | |
| #send packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on access port 2, vid=0, so untag | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:00:11:11:11:11') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port2) | |
| #verify packet on access port 3 | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:00:11:11:11:11', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port3_vid) | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port3) | |
| verify_no_other_packets(self) | |
| add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0x9a], vnid, access_lport2, False, True) | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:9a', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst='00:12:34:56:78:9a') | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port2) | |
| verify_no_other_packets(self) | |
| add_overlay_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, 0xaa], vnid, access_lport3, False, True) | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on access port | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst='00:12:34:56:78:aa', | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port3_vid) | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, access_phy_port3) | |
| verify_no_other_packets(self) | |
| #exit verification so clear all configuration | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport3, phy_port=access_phy_port3, | |
| vlan=access_port3_vid, vnid=vnid, operation="delete") | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport3, access_phy_port3, access_port3_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=access_phy_port3, | |
| vlan=access_port3_vid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class AccessWithNetwork(base_tests.SimpleDataPlane): | |
| def runTest(self): | |
| """ | |
| first verify flood over unicast, | |
| second verify flood over mcast | |
| """ | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| access_port1_vid=1 | |
| access_phy_port1=config["port_map"].keys()[0] | |
| access_lport1=0x10001 | |
| access_lport1_mac=[0x00, 0x00, 0x00, 0x77, 0x77, 0x77] | |
| access_lport1_mac_str=(":".join(map(str, map(hex, access_lport1_mac)))).replace("0x", "") | |
| access_port2_vid=0 | |
| access_phy_port2=config["port_map"].keys()[1] | |
| access_lport2=0x10002 | |
| access_lport2_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x02] | |
| access_lport2_mac_str=(":".join(map(str, map(hex, access_lport2_mac)))).replace("0x", "") | |
| vnid=10 | |
| next_hop_id=1 | |
| next_hop_id_mcast=2 | |
| dst_mac="00:00:11:22:22:11" | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| network_port_phy_port=config["port_map"].keys()[2] | |
| network_lport=0x10003 | |
| network_port_vlan=2 | |
| network_port_sip="192.168.1.1" | |
| network_port_dip="192.168.2.1" | |
| network_lport_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x03] | |
| network_lport_mac_str=(":".join(map(str, map(hex, network_lport_mac)))).replace("0x", "") | |
| feature_reply=get_featureReplay(self) | |
| #get switch CPU mac | |
| str_datapath_id_f= "{:016x}".format(feature_reply.datapath_id) | |
| str_datapath_id=':'.join([str_datapath_id_f[i:i+2] for i in range(0, len(str_datapath_id_f), 2)]) | |
| switch_cpu_mac_str=str_datapath_id[6:] | |
| switch_cpu_mac = switch_cpu_mac_str.split(":") | |
| switch_cpu_mac=[int(switch_cpu_mac[i],16) for i in range(0, len(switch_cpu_mac))] | |
| #add config vtep/vtap/nexthop/vni | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id, dst_mac, network_port_phy_port, network_port_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| #vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport2, access_phy_port2, access_port2_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport, network_port_sip, network_port_dip, next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #add port table to have vxlan ability | |
| add_port_table_flow(self.controller) | |
| add_port_table_flow(self.controller, is_overlay=False) | |
| #for network port need l2 interface group to decide vlan tag or not | |
| add_one_l2_interface_grouop(self.controller, network_port_phy_port, vlan_id=network_port_vlan) | |
| #add network mac | |
| add_overlay_bridge_flow(self.controller, network_lport_mac, vnid, network_lport, False, True) | |
| add_overlay_bridge_flow(self.controller, access_lport1_mac, vnid, access_lport1, False, True) | |
| #add termination table for network port | |
| add_termination_flow(self.controller, in_port=network_port_phy_port, eth_type=0x0800, | |
| dst_mac=switch_cpu_mac, vlanid=network_port_vlan) | |
| #add vlan table for network port rx packet class vlan | |
| add_one_vlan_table_flow(self.controller, of_port=network_port_phy_port, | |
| vlan_id=network_port_vlan) | |
| #tx packet on access lport 1 | |
| parsed_pkt = simple_udp_packet(pktlen=96, eth_dst=network_lport_mac_str, | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| pkt = str(parsed_pkt) | |
| self.dataplane.send(access_phy_port1, pkt) | |
| #verify packet on network port | |
| #need find a way to verify vxlan header | |
| parsed_pkt = simple_udp_packet(pktlen=92, eth_dst=network_lport_mac_str) | |
| pkt = str(parsed_pkt) | |
| verify_packet(self, pkt, network_port_phy_port) | |
| verify_no_other_packets(self) | |
| #tx packet on network lport | |
| inner_pkt = simple_udp_packet(pktlen=96, eth_dst=access_lport1_mac_str) | |
| vxlan_pkt = simple_vxlan_packet(eth_dst=switch_cpu_mac_str, | |
| vnid=vnid, | |
| ip_dst= network_port_sip, | |
| ip_src=network_port_dip, | |
| inner_payload=inner_pkt) | |
| self.dataplane.send(network_port_phy_port, str(vxlan_pkt)) | |
| #verify | |
| inner_pkt = simple_udp_packet(pktlen=100, eth_dst=access_lport1_mac_str, | |
| dl_vlan_enable= True, | |
| vlan_vid=access_port1_vid) | |
| verify_packet(self, inner_pkt, access_phy_port1) | |
| verify_no_other_packets(self) | |
| #exit verification so clear all configuration | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport2, phy_port=access_phy_port2, | |
| vlan=access_port2_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport, | |
| src_ip=network_port_sip, dst_ip=network_port_dip, | |
| next_hop_id=next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id, | |
| dst_mac=dst_mac, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port_phy_port, | |
| vlan=network_port_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| class NetworkToNetwork(base_tests.SimpleDataPlane): | |
| def runTest(self): | |
| """ | |
| This case can't work, can't identify it is chip limitation or not | |
| """ | |
| return | |
| if config["switch_ip"] == None: | |
| logging.error("Doesn't configure switch IP") | |
| return | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vnid=10 | |
| mcast_ipv4="224.1.1.1" | |
| dst_mac_mcast="01:00:5e:01:01:01" | |
| next_hop_id_mcast=3 | |
| access_port1_vid=1 | |
| access_phy_port1=config["port_map"].keys()[0] | |
| access_lport1=0x10001 | |
| network_port1_phy_port=config["port_map"].keys()[1] | |
| network_lport1=0x10003 | |
| network_port1_vlan=2 | |
| network_port1_sip="192.168.1.1" | |
| network_port1_dip="192.168.2.1" | |
| network_port1_next_hop_id=1 | |
| network_port1_dst_mac="00:00:11:22:22:11" | |
| network_lport1_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x33] | |
| network_lport1_mac_str=(":".join(map(str, map(hex, network_lport1_mac)))).replace("0x", "") | |
| network_port2_phy_port=config["port_map"].keys()[2] | |
| network_lport2=0x10004 | |
| network_port2_vlan=3 | |
| network_port2_sip="192.168.3.1" | |
| network_port2_dip="192.168.4.1" | |
| network_port2_next_hop_id=2 | |
| network_port2_dst_mac="00:00:11:22:22:22" | |
| network_lport2_mac=[0x00,0x00, 0x00, 0x00, 0x00, 0x44] | |
| network_lport2_mac_str=(":".join(map(str, map(hex, network_lport2_mac)))).replace("0x", "") | |
| feature_reply=get_featureReplay(self) | |
| #get switch CPU mac | |
| str_datapath_id_f= "{:016x}".format(feature_reply.datapath_id) | |
| str_datapath_id=':'.join([str_datapath_id_f[i:i+2] for i in range(0, len(str_datapath_id_f), 2)]) | |
| switch_cpu_mac_str=str_datapath_id[6:] | |
| switch_cpu_mac = switch_cpu_mac_str.split(":") | |
| switch_cpu_mac=[int(switch_cpu_mac[i],16) for i in range(0, len(switch_cpu_mac))] | |
| #config vlxan | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port1_next_hop_id, | |
| dst_mac=network_port1_dst_mac, | |
| phy_port=network_port1_phy_port, | |
| vlan=network_port1_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", network_port1_next_hop_id, network_port1_dst_mac, network_port1_phy_port, network_port1_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port2_next_hop_id, | |
| dst_mac=network_port2_dst_mac, | |
| phy_port=network_port2_phy_port, | |
| vlan=network_port2_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", network_port2_next_hop_id, network_port2_dst_mac, network_port2_phy_port, network_port2_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port1_phy_port, | |
| vlan=network_port1_vlan) | |
| logging.info("config NextHop %d, DST_MAC %s, PHY %d, VLAN %d", next_hop_id_mcast, dst_mac_mcast, network_port1_phy_port, network_port1_vlan); | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml)==True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=mcast_ipv4, next_hop_id=next_hop_id_mcast) | |
| logging.info("config VNI %lx", vnid); | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid) | |
| logging.info("config VTAP 0x%lx, PHY %d, VID %d, VNID %lx", access_lport1, access_phy_port1, access_port1_vid, vnid); | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport1, | |
| src_ip=network_port1_sip, dst_ip=network_port1_dip, | |
| next_hop_id=network_port1_next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport1, network_port1_sip, network_port1_dip, network_port1_next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport2, | |
| src_ip=network_port2_sip, dst_ip=network_port2_dip, | |
| next_hop_id=network_port2_next_hop_id, | |
| vnid=vnid) | |
| logging.info("config VTEP 0x%lx, SRC_IP %s, DST_IP %s, NEXTHOP_ID %d", network_lport2, network_port2_sip, network_port2_dip, network_port2_next_hop_id); | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| #add port table to have vxlan ability | |
| add_port_table_flow(self.controller) | |
| #for network port need l2 interface group to decide vlan tag or not | |
| add_one_l2_interface_grouop(self.controller, network_port1_phy_port, vlan_id=network_port1_vlan) | |
| add_one_l2_interface_grouop(self.controller, network_port2_phy_port, vlan_id=network_port2_vlan) | |
| #add network mac | |
| add_overlay_bridge_flow(self.controller, network_lport1_mac, vnid, network_lport1, False, True) | |
| add_overlay_bridge_flow(self.controller, network_lport2_mac, vnid, network_lport2, False, True) | |
| #add termination table for network port | |
| add_termination_flow(self.controller, in_port=network_port1_phy_port, eth_type=0x0800, | |
| dst_mac=switch_cpu_mac, vlanid=network_port1_vlan) | |
| add_termination_flow(self.controller, in_port=network_port2_phy_port, eth_type=0x0800, | |
| dst_mac=switch_cpu_mac, vlanid=network_port2_vlan) | |
| #add vlan table for network port rx packet class vlan | |
| add_one_vlan_table_flow(self.controller, of_port=network_port1_phy_port, | |
| vlan_id=network_port1_vlan) | |
| add_one_vlan_table_flow(self.controller, of_port=network_port2_phy_port, | |
| vlan_id=network_port2_vlan) | |
| #packet tx on network port 1 rx on network port 2 | |
| inner_pkt = simple_udp_packet(pktlen=96, eth_dst=network_lport2_mac_str) | |
| vxlan_pkt = simple_vxlan_packet(eth_dst=switch_cpu_mac_str, | |
| vnid=vnid, | |
| ip_dst= network_port1_sip, | |
| ip_src=network_port1_dip, | |
| inner_payload=inner_pkt) | |
| self.dataplane.send(network_port1_phy_port, str(vxlan_pkt)) | |
| #verify | |
| verify_packet(self, str(inner_pkt), network_port2_phy_port) | |
| verify_no_other_packets(self) | |
| #exit verification so clear all configuration | |
| delete_all_flows(self.controller) | |
| delete_all_groups(self.controller) | |
| vtap_conf_xml=get_vtap_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=access_lport1, phy_port=access_phy_port1, | |
| vlan=access_port1_vid, vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtap_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport1, | |
| src_ip=network_port1_sip, dst_ip=network_port1_dip, | |
| next_hop_id=network_port1_next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vtep_conf_xml=get_vtep_lport_config_xml(dp_id=feature_reply.datapath_id, | |
| lport=network_lport2, | |
| src_ip=network_port2_sip, dst_ip=network_port2_dip, | |
| next_hop_id=network_port2_next_hop_id, | |
| vnid=vnid, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vtep_conf_xml) == True) | |
| vni_config_xml=get_vni_config_xml(vni_id=vnid, mcast_ipv4=None, next_hop_id=None, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], vni_config_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port1_next_hop_id, | |
| dst_mac=network_port1_dst_mac, | |
| phy_port=network_port1_phy_port, | |
| vlan=network_port1_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=network_port2_next_hop_id, | |
| dst_mac=network_port2_dst_mac, | |
| phy_port=network_port2_phy_port, | |
| vlan=network_port2_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |
| next_hop_conf_xml=get_next_hop_config_xml(next_hop_id=next_hop_id_mcast, | |
| dst_mac=dst_mac_mcast, | |
| phy_port=network_port1_phy_port, | |
| vlan=network_port1_vlan, operation="delete") | |
| assert(send_edit_config(config["switch_ip"], next_hop_conf_xml) == True) | |