tests/load.py - fabric-oftest - Gitiles

 """
 Prototype test cases related to operation under load

 It is recommended that these definitions be kept in their own
 namespace as different groups of tests will likely define
 similar identifiers.

 The switch is actively attempting to contact the controller at the address
 indicated in config.

 In general these test cases make some assumption about the external
 configuration of the switch under test.  For now, the assumption is
 that the first two OF ports are connected by a loopback cable.
 """

 import copy
 import random
 import logging
 import unittest

 from oftest import config
 import oftest.controller as controller
 import ofp
 import oftest.dataplane as dataplane
 import oftest.parse as parse
 import oftest.base_tests as base_tests
 import time

 from oftest.testutils import *

 @nonstandard
 class LoadBarrier(base_tests.SimpleProtocol):
     """
     Test barrier under load with loopback

     This test assumes there is a pair of ports on the switch with
     a loopback cable connected and that spanning tree is disabled.
     A flow is installed to cause a storm of packet-in messages
     when a packet is sent to the loopbacked interface.  After causing
     this storm, a barrier request is sent.

     The test succeeds if the barrier response is received.  Otherwise
     the test fails.
     """

     def runTest(self):
         # Set up flow to send from port 1 to port 2 and copy to CPU
         # Test parameter gives LB port base (assumes consecutive)
         lb_port = test_param_get('lb_port', default=1)
         barrier_count = test_param_get('barrier_count',
                                        default=10)

         # Set controller to filter packet ins
         self.controller.filter_packet_in = True
         self.controller.pkt_in_filter_limit = 10

         pkt = simple_tcp_packet()
         match = packet_to_flow_match(self, pkt)
         match.wildcards &= ~ofp.OFPFW_IN_PORT
         match.in_port = lb_port
         act = ofp.action.output()
         act.port = lb_port + 1

         request = ofp.message.flow_mod()
         request.match = match
         request.hard_timeout = 2 * barrier_count

         request.buffer_id = 0xffffffff
         request.actions.append(act)

         act = ofp.action.output()
         act.port = ofp.OFPP_CONTROLLER
         request.actions.append(act)

         self.controller.message_send(request)
         do_barrier(self.controller)

         # Create packet out and send to port lb_port + 1
         msg = ofp.message.packet_out()
         msg.in_port = lb_port
         msg.data = str(pkt)
         act = ofp.action.output()
         act.port = lb_port + 1
         msg.actions.append(act)
         logging.info("Sleeping before starting storm")
         time.sleep(1) # Root causing issue with fast disconnects
         logging.info("Sending packet out to %d" % (lb_port + 1))
         self.controller.message_send(msg)

         for idx in range(0, barrier_count):
             do_barrier(self.controller)
             # To do:  Add some interesting functionality here
             logging.info("Barrier %d completed" % idx)

         # Clear the flow table when done
         logging.debug("Deleting all flows from switch")
         delete_all_flows(self.controller)

 class PacketInLoad(base_tests.SimpleDataPlane):
     """
     Generate lots of packet-in messages

     Test packet-in function by sending lots of packets to the dataplane.
     This test tracks the number of pkt-ins received but does not enforce
     any requirements about the number received.
     """
     def runTest(self):
         # Construct packet to send to dataplane
         # Send packet to dataplane, once to each port
         # Poll controller with expect message type packet in

         delete_all_flows(self.controller)
         do_barrier(self.controller)
         out_count = 0
         in_count = 0

         of_ports = config["port_map"].keys()
         for of_port in of_ports:
             for pkt, pt in [
                (simple_tcp_packet(), "simple TCP packet"),
                (simple_tcp_packet(dl_vlan_enable=True,pktlen=108),
                 "simple tagged TCP packet"),
                (simple_eth_packet(), "simple Ethernet packet"),
                (simple_eth_packet(pktlen=40), "tiny Ethernet packet")]:

                logging.info("PKT IN test with %s, port %s" % (pt, of_port))
                for count in range(100):
                    out_count += 1
                    self.dataplane.send(of_port, str(pkt))
         while True:
             (response, raw) = self.controller.poll(ofp.OFPT_PACKET_IN)
             if not response:
                 break
             in_count += 1
         logging.info("PacketInLoad Sent %d. Got %d." % (out_count, in_count))


 class PacketOutLoad(base_tests.SimpleDataPlane):
     """
     Generate lots of packet-out messages

     Test packet-out function by sending lots of packet-out msgs
     to the switch.  This test tracks the number of packets received in
     the dataplane, but does not enforce any requirements about the
     number received.
     """
     def runTest(self):
         # Construct packet to send to dataplane
         # Send packet to dataplane
         # Poll controller with expect message type packet in

         delete_all_flows(self.controller)

         # These will get put into function
         of_ports = config["port_map"].keys()
         of_ports.sort()
         out_count = 0
         in_count = 0
         xid = 100
         for dp_port in of_ports:
             for outpkt, opt in [
                (simple_tcp_packet(), "simple TCP packet"),
                (simple_eth_packet(), "simple Ethernet packet"),
                (simple_eth_packet(pktlen=40), "tiny Ethernet packet")]:

                logging.info("PKT OUT test with %s, port %s" % (opt, dp_port))
                msg = ofp.message.packet_out()
                msg.in_port = ofp.OFPP_NONE
                msg.data = str(outpkt)
                act = ofp.action.output()
                act.port = dp_port
                msg.actions.append(act)

                logging.info("PacketOutLoad to: " + str(dp_port))
                for count in range(100):
                    msg.xid = xid
                    xid += 1
                    self.controller.message_send(msg)
                    out_count += 1

                exp_pkt_arg = None
                exp_port = None
         while True:
             (of_port, pkt, pkt_time) = self.dataplane.poll()
             if pkt is None:
                 break
             in_count += 1
         logging.info("PacketOutLoad Sent %d. Got %d." % (out_count, in_count))

 class FlowModLoad(base_tests.SimpleProtocol):

     def checkBarrier(self):
         msg, pkt = self.controller.transact(ofp.message.barrier_request(), timeout=60)
         self.assertNotEqual(msg, None, "Barrier failed")
         while self.controller.packets:
            msg = self.controller.packets.pop(0)[0]
            self.assertNotEqual(msg.header.type, ofp.message.OFPT_ERROR,
                                "Error received")

     def runTest(self):
         msg, pkt = self.controller.transact(ofp.message.table_stats_request())

         # Some switches report an extremely high max_entries that would cause
         # us to run out of memory attempting to create all the flow-mods.
         num_flows = min(msg.stats[0].max_entries, 32678)

         logging.info("Creating %d flow-mods messages", num_flows)

         requests = []
         for i in range(num_flows):
             match = ofp.ofp_match()
             match.wildcards = ofp.OFPFW_ALL & ~ofp.OFPFW_DL_VLAN & ~ofp.OFPFW_DL_DST
             match.dl_vlan = ofp.OFP_VLAN_NONE
             match.dl_dst = [0, 1, 2, 3, i / 256, i % 256]
             act = ofp.action.output()
             act.port = ofp.OFPP_CONTROLLER
             request = ofp.message.flow_mod()
             request.command = ofp.OFPFC_ADD
             request.buffer_id = 0xffffffff
             request.priority = num_flows - i
             request.out_port = ofp.OFPP_NONE
             request.match = match
             request.actions.append(act)
             requests.append(request)

         for i in range(3):
             logging.info("Iteration %d: delete all flows" % i)
             delete_all_flows(self.controller)
             self.checkBarrier()

             logging.info("Iteration %d: add %s flows" % (i, num_flows))
             random.shuffle(requests)
             for request in requests:
                self.assertNotEqual(self.controller.message_send(request), -1,
                                "Error installing flow mod")
             self.checkBarrier()
	"""
	Prototype test cases related to operation under load

	It is recommended that these definitions be kept in their own
	namespace as different groups of tests will likely define
	similar identifiers.

	The switch is actively attempting to contact the controller at the address
	indicated in config.

	In general these test cases make some assumption about the external
	configuration of the switch under test. For now, the assumption is
	that the first two OF ports are connected by a loopback cable.
	"""

	import copy
	import random
	import logging
	import unittest

	from oftest import config
	import oftest.controller as controller
	import ofp
	import oftest.dataplane as dataplane
	import oftest.parse as parse
	import oftest.base_tests as base_tests
	import time

	from oftest.testutils import *

	@nonstandard
	class LoadBarrier(base_tests.SimpleProtocol):
	"""
	Test barrier under load with loopback

	This test assumes there is a pair of ports on the switch with
	a loopback cable connected and that spanning tree is disabled.
	A flow is installed to cause a storm of packet-in messages
	when a packet is sent to the loopbacked interface. After causing
	this storm, a barrier request is sent.

	The test succeeds if the barrier response is received. Otherwise
	the test fails.
	"""

	def runTest(self):
	# Set up flow to send from port 1 to port 2 and copy to CPU
	# Test parameter gives LB port base (assumes consecutive)
	lb_port = test_param_get('lb_port', default=1)
	barrier_count = test_param_get('barrier_count',
	default=10)

	# Set controller to filter packet ins
	self.controller.filter_packet_in = True
	self.controller.pkt_in_filter_limit = 10

	pkt = simple_tcp_packet()
	match = packet_to_flow_match(self, pkt)
	match.wildcards &= ~ofp.OFPFW_IN_PORT
	match.in_port = lb_port
	act = ofp.action.output()
	act.port = lb_port + 1

	request = ofp.message.flow_mod()
	request.match = match
	request.hard_timeout = 2 * barrier_count

	request.buffer_id = 0xffffffff
	request.actions.append(act)

	act = ofp.action.output()
	act.port = ofp.OFPP_CONTROLLER
	request.actions.append(act)

	self.controller.message_send(request)
	do_barrier(self.controller)

	# Create packet out and send to port lb_port + 1
	msg = ofp.message.packet_out()
	msg.in_port = lb_port
	msg.data = str(pkt)
	act = ofp.action.output()
	act.port = lb_port + 1
	msg.actions.append(act)
	logging.info("Sleeping before starting storm")
	time.sleep(1) # Root causing issue with fast disconnects
	logging.info("Sending packet out to %d" % (lb_port + 1))
	self.controller.message_send(msg)

	for idx in range(0, barrier_count):
	do_barrier(self.controller)
	# To do: Add some interesting functionality here
	logging.info("Barrier %d completed" % idx)

	# Clear the flow table when done
	logging.debug("Deleting all flows from switch")
	delete_all_flows(self.controller)

	class PacketInLoad(base_tests.SimpleDataPlane):
	"""
	Generate lots of packet-in messages

	Test packet-in function by sending lots of packets to the dataplane.
	This test tracks the number of pkt-ins received but does not enforce
	any requirements about the number received.
	"""
	def runTest(self):
	# Construct packet to send to dataplane
	# Send packet to dataplane, once to each port
	# Poll controller with expect message type packet in

	delete_all_flows(self.controller)
	do_barrier(self.controller)
	out_count = 0
	in_count = 0

	of_ports = config["port_map"].keys()
	for of_port in of_ports:
	for pkt, pt in [
	(simple_tcp_packet(), "simple TCP packet"),
	(simple_tcp_packet(dl_vlan_enable=True,pktlen=108),
	"simple tagged TCP packet"),
	(simple_eth_packet(), "simple Ethernet packet"),
	(simple_eth_packet(pktlen=40), "tiny Ethernet packet")]:

	logging.info("PKT IN test with %s, port %s" % (pt, of_port))
	for count in range(100):
	out_count += 1
	self.dataplane.send(of_port, str(pkt))
	while True:
	(response, raw) = self.controller.poll(ofp.OFPT_PACKET_IN)
	if not response:
	break
	in_count += 1
	logging.info("PacketInLoad Sent %d. Got %d." % (out_count, in_count))



	class PacketOutLoad(base_tests.SimpleDataPlane):
	"""
	Generate lots of packet-out messages

	Test packet-out function by sending lots of packet-out msgs
	to the switch. This test tracks the number of packets received in
	the dataplane, but does not enforce any requirements about the
	number received.
	"""
	def runTest(self):
	# Construct packet to send to dataplane
	# Send packet to dataplane
	# Poll controller with expect message type packet in

	delete_all_flows(self.controller)

	# These will get put into function
	of_ports = config["port_map"].keys()
	of_ports.sort()
	out_count = 0
	in_count = 0
	xid = 100
	for dp_port in of_ports:
	for outpkt, opt in [
	(simple_tcp_packet(), "simple TCP packet"),
	(simple_eth_packet(), "simple Ethernet packet"),
	(simple_eth_packet(pktlen=40), "tiny Ethernet packet")]:

	logging.info("PKT OUT test with %s, port %s" % (opt, dp_port))
	msg = ofp.message.packet_out()
	msg.in_port = ofp.OFPP_NONE
	msg.data = str(outpkt)
	act = ofp.action.output()
	act.port = dp_port
	msg.actions.append(act)

	logging.info("PacketOutLoad to: " + str(dp_port))
	for count in range(100):
	msg.xid = xid
	xid += 1
	self.controller.message_send(msg)
	out_count += 1

	exp_pkt_arg = None
	exp_port = None
	while True:
	(of_port, pkt, pkt_time) = self.dataplane.poll()
	if pkt is None:
	break
	in_count += 1
	logging.info("PacketOutLoad Sent %d. Got %d." % (out_count, in_count))

	class FlowModLoad(base_tests.SimpleProtocol):

	def checkBarrier(self):
	msg, pkt = self.controller.transact(ofp.message.barrier_request(), timeout=60)
	self.assertNotEqual(msg, None, "Barrier failed")
	while self.controller.packets:
	msg = self.controller.packets.pop(0)[0]
	self.assertNotEqual(msg.header.type, ofp.message.OFPT_ERROR,
	"Error received")

	def runTest(self):
	msg, pkt = self.controller.transact(ofp.message.table_stats_request())

	# Some switches report an extremely high max_entries that would cause
	# us to run out of memory attempting to create all the flow-mods.
	num_flows = min(msg.stats[0].max_entries, 32678)

	logging.info("Creating %d flow-mods messages", num_flows)

	requests = []
	for i in range(num_flows):
	match = ofp.ofp_match()
	match.wildcards = ofp.OFPFW_ALL & ~ofp.OFPFW_DL_VLAN & ~ofp.OFPFW_DL_DST
	match.dl_vlan = ofp.OFP_VLAN_NONE
	match.dl_dst = [0, 1, 2, 3, i / 256, i % 256]
	act = ofp.action.output()
	act.port = ofp.OFPP_CONTROLLER
	request = ofp.message.flow_mod()
	request.command = ofp.OFPFC_ADD
	request.buffer_id = 0xffffffff
	request.priority = num_flows - i
	request.out_port = ofp.OFPP_NONE
	request.match = match
	request.actions.append(act)
	requests.append(request)

	for i in range(3):
	logging.info("Iteration %d: delete all flows" % i)
	delete_all_flows(self.controller)
	self.checkBarrier()

	logging.info("Iteration %d: add %s flows" % (i, num_flows))
	random.shuffle(requests)
	for request in requests:
	self.assertNotEqual(self.controller.message_send(request), -1,
	"Error installing flow mod")
	self.checkBarrier()