| """ |
| The following tests are being done here |
| 1) PacketInSrcMacMiss |
| 2) VlanSupport |
| 3) L2FloodQinQ |
| 4) L2FloodTagged |
| 5) L2Flood Tagged Unknown Src |
| 6) L2 Unicast Tagged |
| 7) MTU 1500 |
| 8) MTU 4100 |
| 9) MTU 4500 |
| 10) L3UnicastTagged |
| 11) L3VPNMPLS |
| 12) MPLS Termination |
| """ |
| |
| from oftest import config |
| import inspect |
| import logging |
| import oftest.base_tests as base_tests |
| import ofp |
| from oftest.testutils import * |
| from accton_util import * |
| |
| class PacketInUDP(base_tests.SimpleDataPlane): |
| """ |
| Test packet in function for a table-miss flow |
| Send a packet to each dataplane port and verify that a packet |
| in message is received from the controller for each |
| |
| NOTE: Verify This case the oft option shall not use --switch-ip |
| """ |
| |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| parsed_vlan_pkt = simple_udp_packet(pktlen=104, |
| vlan_vid=0x1001, dl_vlan_enable=True) |
| vlan_pkt = str(parsed_vlan_pkt) |
| # create match |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x0800)) |
| match.oxm_list.append(ofp.oxm.ip_proto(17)) |
| request = ofp.message.flow_add( |
| table_id=60, |
| cookie=42, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.output( |
| port=ofp.OFPP_CONTROLLER, |
| max_len=ofp.OFPCML_NO_BUFFER)]), ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1) |
| |
| logging.info("Inserting packet in flow to controller") |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| |
| for of_port in config["port_map"].keys(): |
| logging.info("PacketInMiss test, port %d", of_port) |
| self.dataplane.send(of_port, vlan_pkt) |
| |
| verify_packet_in(self, vlan_pkt, of_port, ofp.OFPR_ACTION) |
| |
| verify_no_other_packets(self) |
| |
| |
| @disabled |
| class ArpNL2(base_tests.SimpleDataPlane): |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| ports = sorted(config["port_map"].keys()) |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x0806)) |
| request = ofp.message.flow_add( |
| table_id=60, |
| cookie=42, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.output( |
| port=ofp.OFPP_CONTROLLER, |
| max_len=ofp.OFPCML_NO_BUFFER)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=40000) |
| self.controller.message_send(request) |
| for port in ports: |
| add_one_l2_interface_group(self.controller, port, 1, False, False) |
| add_one_vlan_table_flow(self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_BOTH) |
| group_id = encode_l2_interface_group_id(1, port) |
| add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], 1, group_id, True) |
| do_barrier(self.controller) |
| parsed_arp_pkt = simple_arp_packet() |
| arp_pkt = str(parsed_arp_pkt) |
| |
| for out_port in ports: |
| self.dataplane.send(out_port, arp_pkt) |
| verify_packet_in(self, arp_pkt, out_port, ofp.OFPR_ACTION) |
| # change dest based on port number |
| mac_dst= '00:12:34:56:78:%02X' % out_port |
| for in_port in ports: |
| if in_port == out_port: |
| continue |
| # change source based on port number to avoid packet-ins from learning |
| mac_src= '00:12:34:56:78:%02X' % in_port |
| parsed_pkt = simple_tcp_packet(eth_dst=mac_dst, eth_src=mac_src) |
| pkt = str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| |
| for ofport in ports: |
| if ofport in [out_port]: |
| verify_packet(self, pkt, ofport) |
| else: |
| verify_no_packet(self, pkt, ofport) |
| |
| verify_no_other_packets(self) |
| |
| class PacketInArp(base_tests.SimpleDataPlane): |
| """ |
| Test packet in function for a table-miss flow |
| Send a packet to each dataplane port and verify that a packet |
| in message is received from the controller for each |
| |
| NOTE: Verify This case the oft option shall not use --switch-ip |
| """ |
| |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| parsed_arp_pkt = simple_arp_packet() |
| arp_pkt = str(parsed_arp_pkt) |
| ports = sorted(config["port_map"].keys()) |
| #for port in ports: |
| # add_one_l2_interface_group(self.controller, port, 1, True, False) |
| # add_one_vlan_table_flow(self.controller, port, 1, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| |
| # create match |
| match = ofp.match() |
| match.oxm_list.append(ofp.oxm.eth_type(0x0806)) |
| request = ofp.message.flow_add( |
| table_id=60, |
| cookie=42, |
| match=match, |
| instructions=[ |
| ofp.instruction.apply_actions( |
| actions=[ |
| ofp.action.output( |
| port=ofp.OFPP_CONTROLLER, |
| max_len=ofp.OFPCML_NO_BUFFER)]), |
| ], |
| buffer_id=ofp.OFP_NO_BUFFER, |
| priority=1) |
| |
| logging.info("Inserting packet in flow to controller") |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| |
| for of_port in config["port_map"].keys(): |
| logging.info("PacketInMiss test, port %d", of_port) |
| self.dataplane.send(of_port, arp_pkt) |
| |
| verify_packet_in(self, arp_pkt, of_port, ofp.OFPR_ACTION) |
| |
| verify_no_other_packets(self) |
| |
| class L2FloodQinQ(base_tests.SimpleDataPlane): |
| """ |
| Test L2 flood of double tagged vlan packets (802.1Q) |
| Sends a double tagged packet and verifies flooding behavior according to outer vlan |
| """ |
| def runTest(self): |
| ports = sorted(config["port_map"].keys()) |
| #Hashes Test Name and uses it as id for installing unique groups |
| vlan_id=abs(hash(inspect.stack()[0][3])) % (256) |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| # Installing flows to avoid packet-in |
| for port in ports: |
| add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| |
| msg=add_l2_flood_group(self.controller, ports, vlan_id, vlan_id) |
| add_bridge_flow(self.controller, None, vlan_id, msg.group_id, True) |
| do_barrier(self.controller) |
| |
| #verify flood |
| for ofport in ports: |
| # change dest based on port number |
| mac_src= '00:12:34:56:78:%02X' % ofport |
| parsed_pkt = simple_tcp_packet_two_vlan(pktlen=108, out_dl_vlan_enable=True, out_vlan_vid=vlan_id, |
| in_dl_vlan_enable=True, in_vlan_vid=10, eth_dst='00:12:34:56:78:9a', eth_src=mac_src) |
| pkt = str(parsed_pkt) |
| self.dataplane.send(ofport, pkt) |
| #self won't rx packet |
| verify_no_packet(self, pkt, ofport) |
| #others will rx packet |
| tmp_ports=list(ports) |
| tmp_ports.remove(ofport) |
| verify_packets(self, pkt, tmp_ports) |
| |
| verify_no_other_packets(self) |
| |
| @disabled |
| class L2FloodTagged(base_tests.SimpleDataPlane): |
| """ |
| Test L2 flood to a vlan |
| Send a packet with unknown dst_mac and check if the packet is flooded to all ports except inport |
| """ |
| def runTest(self): |
| #Hashes Test Name and uses it as id for installing unique groups |
| vlan_id=abs(hash(inspect.stack()[0][3])) % (256) |
| print vlan_id |
| |
| ports = sorted(config["port_map"].keys()) |
| |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| # Installing flows to avoid packet-in |
| for port in ports: |
| add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| msg=add_l2_flood_group(self.controller, ports, vlan_id, vlan_id) |
| add_bridge_flow(self.controller, None, vlan_id, msg.group_id, True) |
| do_barrier(self.controller) |
| |
| #verify flood |
| for ofport in ports: |
| # change dest based on port number |
| pkt = str( simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst='00:12:34:56:78:9a') ) |
| self.dataplane.send(ofport, pkt) |
| #self won't rx packet |
| verify_no_packet(self, pkt, ofport) |
| #others will rx packet |
| tmp_ports=list(ports) |
| tmp_ports.remove(ofport) |
| verify_packets(self, pkt, tmp_ports) |
| verify_no_other_packets(self) |
| |
| class L2UnicastTagged(base_tests.SimpleDataPlane): |
| """ |
| Test output function for an exact-match flow |
| |
| For each port A, adds a flow directing matching packets to that port. |
| Then, for all other ports B != A, verifies that sending a matching packet |
| to B results in an output to A. |
| """ |
| def runTest(self): |
| ports = sorted(config["port_map"].keys()) |
| #Hashes Test Name and uses it as id for installing unique groups |
| vlan_id=abs(hash(inspect.stack()[0][3])) % (256) |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| for port in ports: |
| add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| group_id = encode_l2_interface_group_id(vlan_id, port) |
| add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id, group_id, True) |
| do_barrier(self.controller) |
| |
| for out_port in ports: |
| # change dest based on port number |
| mac_dst= '00:12:34:56:78:%02X' % out_port |
| for in_port in ports: |
| if in_port == out_port: |
| continue |
| pkt = str( simple_tcp_packet(dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst=mac_dst)) |
| self.dataplane.send(in_port, pkt) |
| for ofport in ports: |
| if ofport in [out_port]: |
| verify_packet(self, pkt, ofport) |
| else: |
| verify_no_packet(self, pkt, ofport) |
| verify_no_other_packets(self) |
| |
| class Mtu1500(base_tests.SimpleDataPlane): |
| |
| def runTest(self): |
| ports = sorted(config["port_map"].keys()) |
| #Hashes Test Name and uses it as id for installing unique groups |
| vlan_id=abs(hash(inspect.stack()[0][3])) % (256) |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| for port in ports: |
| add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| group_id = encode_l2_interface_group_id(vlan_id, port) |
| add_bridge_flow(self.controller, [0x00, 0x12, 0x34, 0x56, 0x78, port], vlan_id, group_id, True) |
| do_barrier(self.controller) |
| |
| for out_port in ports: |
| # change dest based on port number |
| mac_dst= '00:12:34:56:78:%02X' % out_port |
| for in_port in ports: |
| if in_port == out_port: |
| continue |
| pkt = str(simple_tcp_packet(pktlen=1500,dl_vlan_enable=True, vlan_vid=vlan_id, eth_dst=mac_dst)) |
| self.dataplane.send(in_port, pkt) |
| for ofport in ports: |
| if ofport in [out_port]: |
| verify_packet(self, pkt, ofport) |
| else: |
| verify_no_packet(self, pkt, ofport) |
| verify_no_other_packets(self) |
| |
| class L3UcastTagged(base_tests.SimpleDataPlane): |
| """ |
| Port1(vid=in_port, src=00:00:00:22:22:in_port, 192.168.outport.1) , |
| Port2(vid=outport, dst=00:00:00:22:22:outport, 192.168.outport.1) |
| """ |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| #Hashes Test Name and uses it as id for installing unique groups |
| class_id=abs(hash(inspect.stack()[0][3])) % (256) |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| dip=0xc0a80001 |
| ports = config["port_map"].keys() |
| for port in ports: |
| #add l2 interface group |
| vlan_id=port+class_id |
| add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False) |
| dst_mac[5]=vlan_id |
| l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=vlan_id, src_mac=intf_src_mac, dst_mac=dst_mac) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id) |
| #add unicast routing flow |
| dst_ip = dip + (vlan_id<<8) |
| add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id) |
| #add entries in the Bridging table to avoid packet-in from mac learning |
| group_id = encode_l2_interface_group_id(vlan_id, port) |
| add_bridge_flow(self.controller, dst_mac, vlan_id, group_id, True) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| mac_src='00:00:00:22:22:%02X' % (class_id+in_port) |
| ip_src='192.168.%02d.1' % (class_id+in_port) |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % (class_id+out_port) |
| parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port), |
| eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, |
| ip_dst=ip_dst) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| #build expected packet |
| mac_dst='00:00:00:22:22:%02X' % (class_id+out_port) |
| exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+out_port), |
| eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, |
| ip_src=ip_src, ip_dst=ip_dst) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |
| class L3VPNMPLS(base_tests.SimpleDataPlane): |
| """ |
| Insert IP packet |
| Receive MPLS packet |
| """ |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| dip=0xc0a80001 |
| #Hashes Test Name and uses it as id for installing unique groups |
| class_id=abs(hash(inspect.stack()[0][3])) % (200) |
| ports = config["port_map"].keys() |
| for port in ports: |
| #add l2 interface group |
| id=port+class_id<<8 |
| vlan_id=port+class_id |
| l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, True) |
| dst_mac[5]=vlan_id |
| #add MPLS interface group |
| mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid, dst_mac, intf_src_mac, vlan_id, id) |
| #add MPLS L3 VPN group |
| mpls_label_gid, mpls_label_msg = add_mpls_label_group(self.controller, subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, |
| index=id, ref_gid= mpls_gid, push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32) |
| ecmp_msg=add_l3_ecmp_group(self.controller, id, [mpls_label_gid]) |
| do_barrier(self.controller) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id) |
| #add routing flow |
| dst_ip = dip + (vlan_id<<8) |
| #add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0, mpls_label_gid, vrf=2) |
| add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffff00, ecmp_msg.group_id, vrf=0) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| mac_src='00:00:00:22:22:%02X' % (class_id+in_port) |
| ip_src='192.168.%02d.1' % (class_id+in_port) |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % (class_id+out_port) |
| parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port), |
| eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, |
| ip_dst=ip_dst) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| #build expect packet |
| mac_dst='00:00:00:22:22:%02X' % (class_id+out_port) |
| label = (out_port, 0, 1, 32) |
| exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(out_port+class_id), ip_ttl=63, ip_src=ip_src, |
| ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac, label=[label]) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |
| class _32VPN(base_tests.SimpleDataPlane): |
| """ |
| Insert IP packet |
| Receive MPLS packet |
| """ |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| dip=0xc0a80001 |
| #Hashes Test Name and uses it as id for installing unique groups |
| class_id=abs(hash(inspect.stack()[0][3])) % (256) |
| ports = config["port_map"].keys() |
| for port in ports: |
| #add l2 interface group |
| id=port+class_id<<8 |
| vlan_id=port+class_id |
| l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, True) |
| dst_mac[5]=vlan_id |
| #add MPLS interface group |
| mpls_gid, mpls_msg = add_mpls_intf_group(self.controller, l2_gid, dst_mac, intf_src_mac, vlan_id, id) |
| #add MPLS L3 VPN group |
| mpls_label_gid, mpls_label_msg = add_mpls_label_group(self.controller, subtype=OFDPA_MPLS_GROUP_SUBTYPE_L3_VPN_LABEL, |
| index=id, ref_gid= mpls_gid, push_mpls_header=True, set_mpls_label=port, set_bos=1, set_ttl=32) |
| #ecmp_msg=add_l3_ecmp_group(self.controller, vlan_id, [mpls_label_gid]) |
| do_barrier(self.controller) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, vrf=0, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id) |
| #add routing flow |
| dst_ip = dip + (vlan_id<<8) |
| add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, mpls_label_gid) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| ip_src='192.168.%02d.1' % (class_id+in_port) |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % (class_id+out_port) |
| parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+in_port), |
| eth_dst=switch_mac, ip_ttl=64, ip_src=ip_src, |
| ip_dst=ip_dst) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| #build expect packet |
| mac_dst='00:00:00:22:22:%02X' % (class_id+out_port) |
| label = (out_port, 0, 1, 32) |
| exp_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(class_id+out_port), ip_ttl=63, ip_src=ip_src, |
| ip_dst=ip_dst, eth_dst=mac_dst, eth_src=switch_mac, label=[label]) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| @disabled |
| class MPLSBUG(base_tests.SimpleDataPlane): |
| |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| dip=0xc0a80001 |
| index=1 |
| ports = config["port_map"].keys() |
| for port in ports: |
| #add l2 interface group |
| vlan_id=port |
| l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| dst_mac[5]=vlan_id |
| #add L3 Unicast group |
| l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=vlan_id, src_mac=intf_src_mac, dst_mac=dst_mac) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_BOTH) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24) |
| #add mpls flow |
| add_mpls_flow(self.controller, l3_msg.group_id, port) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id) |
| #add unicast routing flow |
| dst_ip = dip + (vlan_id<<8) |
| add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, l3_msg.group_id) |
| |
| #add entries in the Bridging table to avoid packet-in from mac learning |
| group_id = encode_l2_interface_group_id(vlan_id, port) |
| add_bridge_flow(self.controller, dst_mac, vlan_id, group_id, True) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| mac_src='00:00:00:22:22:%02X' % in_port |
| ip_src='192.168.%02d.1' % in_port |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % out_port |
| switch_mac = "00:00:00:cc:cc:cc" |
| label = (out_port, 0, 1, 32) |
| parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=in_port, ip_src=ip_src, |
| ip_dst=ip_dst, eth_dst=switch_mac, eth_src=mac_src, label=[label]) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| |
| #build expect packet |
| mac_dst='00:00:00:22:22:%02X' % out_port |
| exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port, |
| eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |
| parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=in_port, |
| eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, |
| ip_dst=ip_dst) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| #build expected packet |
| mac_dst='00:00:00:22:22:%02X' % out_port |
| exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port, |
| eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, |
| ip_src=ip_src, ip_dst=ip_dst) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |
| class L3McastToL2(base_tests.SimpleDataPlane): |
| """ |
| Mcast routing to L2 |
| """ |
| def runTest(self): |
| """ |
| port1 (vlan 300)-> All Ports (vlan 300) |
| """ |
| #delete_all_flows(self.controller) |
| #delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <3: |
| logging.info("Port count less than 3, can't run this case") |
| assert(False) |
| return |
| |
| vlan_id =300 |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| intf_src_mac_str=':'.join(['%02X' % x for x in intf_src_mac]) |
| dst_mac=[0x01, 0x00, 0x5e, 0x01, 0x01, 0x01] |
| dst_mac_str=':'.join(['%02X' % x for x in dst_mac]) |
| port1_mac=[0x00, 0x11, 0x11, 0x11, 0x11, 0x11] |
| port1_mac_str=':'.join(['%02X' % x for x in port1_mac]) |
| src_ip=0xc0a80101 |
| src_ip_str="192.168.1.1" |
| dst_ip=0xe0010101 |
| dst_ip_str="224.1.1.1" |
| |
| port1=config["port_map"].keys()[0] |
| port2=config["port_map"].keys()[1] |
| |
| switch_mac = [0x01, 0x00, 0x5e, 0x00, 0x00, 0x00] |
| |
| |
| #add l2 interface group |
| l2_intf_group_list=[] |
| for port in config["port_map"].keys(): |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| if port == port2: |
| continue |
| l2_intf_gid, msg=add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False) |
| l2_intf_group_list.append(l2_intf_gid) |
| |
| #add termination flow |
| add_termination_flow(self.controller, port1, 0x0800, switch_mac, vlan_id) |
| |
| #add l3 interface group |
| mcat_group_msg=add_l3_mcast_group(self.controller, vlan_id, 2, l2_intf_group_list) |
| add_mcast4_routing_flow(self.controller, vlan_id, src_ip, 0, dst_ip, mcat_group_msg.group_id) |
| |
| parsed_pkt = simple_udp_packet(pktlen=100, |
| dl_vlan_enable=True, |
| vlan_vid=vlan_id, |
| eth_dst=dst_mac_str, |
| eth_src=port1_mac_str, |
| ip_ttl=64, |
| ip_src=src_ip_str, |
| ip_dst=dst_ip_str) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(port1, pkt) |
| for port in config["port_map"].keys(): |
| if port == port2 or port == port1: |
| verify_no_packet(self, pkt, port) |
| continue |
| verify_packet(self, pkt, port) |
| verify_no_other_packets(self) |
| |
| class L3McastToL3(base_tests.SimpleDataPlane): |
| """ |
| Mcast routing |
| """ |
| def runTest(self): |
| """ |
| port1 (vlan 1)-> port 2 (vlan 2) |
| """ |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <3: |
| logging.info("Port count less than 3, can't run this case") |
| assert(False) |
| return |
| |
| vlan_id =1 |
| port2_out_vlan=2 |
| port3_out_vlan=3 |
| in_vlan=1 #macast group vid shall use input vlan diffe from l3 interface use output vlan |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| intf_src_mac_str=':'.join(['%02X' % x for x in intf_src_mac]) |
| dst_mac=[0x01, 0x00, 0x5e, 0x01, 0x01, 0x01] |
| dst_mac_str=':'.join(['%02X' % x for x in dst_mac]) |
| port1_mac=[0x00, 0x11, 0x11, 0x11, 0x11, 0x11] |
| port1_mac_str=':'.join(['%02X' % x for x in port1_mac]) |
| src_ip=0xc0a80101 |
| src_ip_str="192.168.1.1" |
| dst_ip=0xe0010101 |
| dst_ip_str="224.1.1.1" |
| |
| port1=config["port_map"].keys()[0] |
| port2=config["port_map"].keys()[1] |
| port3=config["port_map"].keys()[2] |
| |
| #add l2 interface group |
| for port in config["port_map"].keys(): |
| add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=False, send_barrier=False) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| vlan_id +=1 |
| |
| #add termination flow |
| add_termination_flow(self.controller, port1, 0x0800, [0x01, 0x00, 0x5e, 0x00, 0x00, 0x00], vlan_id) |
| |
| #add l3 interface group |
| port2_ucast_msg=add_l3_interface_group(self.controller, port2, port2_out_vlan, 2, intf_src_mac) |
| port3_ucast_msg=add_l3_interface_group(self.controller, port3, port3_out_vlan, 3, intf_src_mac) |
| mcat_group_msg=add_l3_mcast_group(self.controller, in_vlan, 2, [port2_ucast_msg.group_id, port3_ucast_msg.group_id]) |
| add_mcast4_routing_flow(self.controller, in_vlan, src_ip, 0, dst_ip, mcat_group_msg.group_id) |
| |
| parsed_pkt = simple_udp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=1, |
| eth_dst=dst_mac_str, |
| eth_src=port1_mac_str, |
| ip_ttl=64, |
| ip_src=src_ip_str, |
| ip_dst=dst_ip_str) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(port1, pkt) |
| parsed_pkt = simple_udp_packet(pktlen=96, |
| eth_dst=dst_mac_str, |
| eth_src=intf_src_mac_str, |
| ip_ttl=63, |
| ip_src=src_ip_str, |
| ip_dst=dst_ip_str) |
| pkt=str(parsed_pkt) |
| verify_packet(self, pkt, port2) |
| verify_packet(self, pkt, port3) |
| verify_no_other_packets(self) |
| |
| |
| |
| class _MplsTermination(base_tests.SimpleDataPlane): |
| """ |
| Insert IP packet |
| Receive MPLS packet |
| """ |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| #Hashes Test Name and uses it as id for installing unique groups |
| class_id=abs(hash(inspect.stack()[0][3])) % (256) |
| ports = config["port_map"].keys() |
| for port in ports: |
| #add l2 interface group |
| id = port + class_id<<8 |
| vlan_id=port+class_id |
| l2_gid, l2_msg = add_one_l2_interface_group(self.controller, port, vlan_id, True, False) |
| dst_mac[5]=vlan_id |
| #add L3 Unicast group |
| l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=id, src_mac=intf_src_mac, dst_mac=dst_mac) |
| #add L3 ecmp group |
| ecmp_msg = add_l3_ecmp_group(self.controller, id, [l3_msg.group_id]) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x8847, intf_src_mac, vlan_id, goto_table=24) |
| add_mpls_flow(self.controller, ecmp_msg.group_id, port) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| ip_src='192.168.%02d.1' % (class_id+in_port) |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % (class_id+out_port) |
| |
| label = (out_port, 0, 1, 32) |
| parsed_pkt = mpls_packet(pktlen=104, dl_vlan_enable=True, vlan_vid=(in_port+class_id), ip_src=ip_src, |
| ip_dst=ip_dst, eth_dst=switch_mac, label=[label]) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| |
| #build expect packet |
| mac_dst='00:00:00:22:22:%02X' % (class_id+out_port) |
| exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=(class_id+out_port), |
| eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=31, ip_src=ip_src, ip_dst=ip_dst) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |
| class _32ECMPL3(base_tests.SimpleDataPlane): |
| """ |
| Port1(vid=in_port, src=00:00:00:22:22:in_port, 192.168.outport.1) , |
| Port2(vid=outport, dst=00:00:00:22:22:outport, 192.168.outport.1) |
| """ |
| def runTest(self): |
| delete_all_flows(self.controller) |
| delete_all_groups(self.controller) |
| |
| if len(config["port_map"]) <2: |
| logging.info("Port count less than 2, can't run this case") |
| return |
| |
| intf_src_mac=[0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc] |
| dst_mac=[0x00, 0x00, 0x00, 0x22, 0x22, 0x00] |
| dip=0xc0a80001 |
| #Hashes Test Name and uses it as id for installing unique groups |
| class_id=abs(hash(inspect.stack()[0][3])) % (256) |
| ports = config["port_map"].keys() |
| for port in ports: |
| vlan_id=port |
| id=port+class_id<<8 |
| #add l2 interface group |
| add_one_l2_interface_group(self.controller, port, vlan_id=vlan_id, is_tagged=True, send_barrier=False) |
| dst_mac[5]=vlan_id |
| l3_msg=add_l3_unicast_group(self.controller, port, vlanid=vlan_id, id=id, src_mac=intf_src_mac, dst_mac=dst_mac) |
| ecmp_msg=add_l3_ecmp_group(self.controller, id, [l3_msg.group_id]) |
| #add vlan flow table |
| add_one_vlan_table_flow(self.controller, port, vlan_id, flag=VLAN_TABLE_FLAG_ONLY_TAG) |
| #add termination flow |
| add_termination_flow(self.controller, port, 0x0800, intf_src_mac, vlan_id) |
| #add unicast routing flow |
| dst_ip = dip + (vlan_id<<8) |
| add_unicast_routing_flow(self.controller, 0x0800, dst_ip, 0xffffffff, ecmp_msg.group_id) |
| |
| do_barrier(self.controller) |
| |
| switch_mac = ':'.join(['%02X' % x for x in intf_src_mac]) |
| for in_port in ports: |
| mac_src='00:00:00:22:22:%02X' % in_port |
| ip_src='192.168.%02d.1' % in_port |
| for out_port in ports: |
| if in_port == out_port: |
| continue |
| ip_dst='192.168.%02d.1' % out_port |
| parsed_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=in_port, |
| eth_dst=switch_mac, eth_src=mac_src, ip_ttl=64, ip_src=ip_src, |
| ip_dst=ip_dst) |
| pkt=str(parsed_pkt) |
| self.dataplane.send(in_port, pkt) |
| #build expected packet |
| mac_dst='00:00:00:22:22:%02X' % out_port |
| exp_pkt = simple_tcp_packet(pktlen=100, dl_vlan_enable=True, vlan_vid=out_port, |
| eth_dst=mac_dst, eth_src=switch_mac, ip_ttl=63, |
| ip_src=ip_src, ip_dst=ip_dst) |
| pkt=str(exp_pkt) |
| verify_packet(self, pkt, out_port) |
| verify_no_other_packets(self) |
| |