| |
| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| """ |
| Check README file |
| """ |
| import Queue |
| import time |
| |
| from oftest import config |
| import inspect |
| import logging |
| import oftest.base_tests as base_tests |
| import ofp |
| from oftest.testutils import * |
| from accton_util import * |
| from utils import * |
| |
| class UntaggedPWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives untagged to the MPLS-TP CE device, it goes out |
| untagged, with a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_UNTAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=0 |
| ) |
| # we send a simple tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we verify the pw packet has been generated |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=130, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| # Flush all the rules for the next couple |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class Untagged2PWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives untagged to the MPLS-TP CE device, it goes out |
| tagged, with a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=0 |
| ) |
| # we send a simple tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we verify the pw packet has been generated |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| # Flush all the rules for the next couple |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class UntaggedPWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives untagged to the MPLS-TP CE device, it goes out |
| untagged, with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_UNTAGGED, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=0 |
| ) |
| # we generate a simple tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the pw packet we expect on the out port |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class Untagged2PWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives untagged to the MPLS-TP CE device, it goes out |
| tagged with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=0 |
| ) |
| # we generate a simple tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the pw packet we expect on the out port |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=138, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Asserions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class TaggedPWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives tagged to the MPLS-TP CE device, it goes out |
| with the same tag, a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=1 |
| ) |
| # we generate a simple tcp packet tagged |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[in_port] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=130, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class Tagged2PWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives tagged to the MPLS-TP CE device, it goes out |
| with a different vlan, with a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED_TRANS, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=1 |
| ) |
| # we generate a simple tcp packet tagged |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[in_port] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=130, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_3[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class TaggedPWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives tagged to the MPLS-TP CE device, it goes out |
| with the same vlan, with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=1 |
| ) |
| # we generate a simple tcp packet tagged |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[in_port] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expect pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2) |
| delete_all_groups( self.controller ) |
| |
| class Tagged2PWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives tagged to the MPLS-TP CE device, it goes out |
| with a different vlam, with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED_TRANS, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=1 |
| ) |
| # we generate a simple tcp packet tagged |
| parsed_pkt = simple_tcp_packet( |
| pktlen=104, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[in_port] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expect pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_3[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class DoubleTaggedPWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives double tagged to the MPLS-TP CE device, it goes out |
| with the same outer vlan, with a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=2, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=2 |
| ) |
| # we generate a simple tcp packet with two vlans |
| parsed_pkt = simple_tcp_packet_two_vlan( |
| pktlen=108, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class DoubleTagged2PWInitiation_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives double tagged to the MPLS-TP CE device and goes out |
| with a new ethernet header and 2 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=2, |
| egress_tag=EGRESS_TAGGED_TRANS, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=2 |
| ) |
| # we generate a simple tcp packet with two vlans |
| parsed_pkt = simple_tcp_packet_two_vlan( |
| pktlen=108, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=134, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_3[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class DoubleTaggedPWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives double tagged to the MPLS-TP CE device and goes out |
| with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=2, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=2 |
| ) |
| # we generate a simple tcp packet with two wlan |
| parsed_pkt = simple_tcp_packet_two_vlan( |
| pktlen=108, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=138, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class DoubleTagged2PWInitiation_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Initiation. The traffic |
| arrives double tagged to the MPLS-TP CE device and goes out |
| with a new ethernet header and 3 mpls labels. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| ingress_tags=2, |
| egress_tag=EGRESS_TAGGED_TRANS, |
| mpls_labels=2 |
| ) |
| # we fill the pipeline for the pw termination |
| # on the reverse path |
| ( |
| port_to_mpls_label_pw_x, |
| port_to_vlan_2_x, |
| port_to_vlan_1_x, |
| port_to_switch_mac_str_x, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| egress_tags=2 |
| ) |
| # we generate a simple tcp packet with two wlan |
| parsed_pkt = simple_tcp_packet_two_vlan( |
| pktlen=108, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 63) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 63) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=138, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| out_eth_src=port_to_src_mac_str[out_port], |
| label=[label_2, label_1, label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_3[in_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[in_port], |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| |
| class IntraCO_2_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW intermediate transport. |
| Incoming packet has 2 labels (SR/PW) (intermediate leaf switch). |
| There is no VLAN tag in the incoming packet. Pop outer MPLS label |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| # we fill the pw pipeline for the intermediate transport |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_switch_mac_str, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups |
| ) = fill_pw_intermediate_transport_pipeline( |
| self.controller, |
| logging, |
| ports, |
| mpls_labels=3 |
| ) |
| |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we geneate the pw packet |
| label_1 = (port_to_mpls_label_2[in_port], 0, 0, 32) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 32) |
| parsed_pkt = mpls_packet( |
| pktlen=104, |
| ip_ttl=63, |
| eth_dst=port_to_switch_mac_str[in_port], |
| label=[ label_1, label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we geneate the expected pw packet |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 31) |
| parsed_pkt = mpls_packet( |
| pktlen=100, |
| ip_ttl=63, |
| eth_dst=port_to_dst_mac_str[in_port], |
| eth_src=port_to_src_mac_str[out_port], |
| label=[ label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class IntraCO_3_Labels( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW intermediate transport. |
| Incoming packet has 3 labels (SR/SR/PW) (spine switch). |
| There is no VLAN tag in the incoming packet. Pop outer MPLS label |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| # we fill the pipeline for the intermediate transport |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_switch_mac_str, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups |
| ) = fill_pw_intermediate_transport_pipeline( |
| self.controller, |
| logging, |
| ports, |
| mpls_labels=3 |
| ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we generate the pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 32) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 32) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 32) |
| parsed_pkt = mpls_packet( |
| pktlen=104, |
| ip_ttl=63, |
| eth_dst=port_to_switch_mac_str[in_port], |
| label=[ label_2, label_1, label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 31) |
| parsed_pkt = mpls_packet( |
| pktlen=100, |
| ip_ttl=63, |
| eth_dst=port_to_dst_mac_str[in_port], |
| eth_src=port_to_src_mac_str[out_port], |
| label=[ label_1, label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class InterCO( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW intermediate transport. |
| Incoming packet has 1 labels (PW) (Intermediate CO leaf switch). |
| There is no VLAN tag in the incoming packet. Push up to 2 MPLS labels |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| # we fill the pipeline for the intermediate transport |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_switch_mac_str, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups |
| ) = fill_pw_intermediate_transport_pipeline( |
| self.controller, |
| logging, |
| ports, |
| mpls_labels=1 |
| ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 32) |
| parsed_pkt = mpls_packet( |
| pktlen=104, |
| ip_ttl=63, |
| eth_dst=port_to_switch_mac_str[in_port], |
| label=[ label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected pw packet |
| label_2 = (port_to_mpls_label_2[in_port], 0, 0, 31) |
| label_1 = (port_to_mpls_label_1[in_port], 0, 0, 31) |
| label_pw = (port_to_mpls_label_pw[in_port], 0, 1, 31) |
| parsed_pkt = mpls_packet( |
| pktlen=112, |
| ip_ttl=63, |
| eth_dst=port_to_dst_mac_str[in_port], |
| eth_src=port_to_src_mac_str[out_port], |
| label=[ label_2, label_1, label_pw ] |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class UntaggedPWTermination( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Termination. The traffic |
| arrives untagged to the MPLS-TP CE device and goes out |
| without the outer ethernet header and untagged. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| # on the reverse path |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_UNTAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| ( |
| port_to_mpls_label_pw, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_dst_mac_str, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| egress_tags=0 |
| ) |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[out_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=82, |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class Untagged2PWTermination( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Termination. The traffic |
| arrives untagged to the MPLS-TP CE device and goes out |
| without the outer ethernet header and untagged |
| but was originally tagged. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| |
| # we fill the pipeline for the pw initiation |
| # on the reverse path |
| |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| ingress_tags=0, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| ( |
| port_to_mpls_label_pw, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_dst_mac_str, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| egress_tags=0 |
| ) |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[out_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[out_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected tcp packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=78, |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class TaggedPWTermination( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Termination. The traffic |
| arrives untagged to the MPLS-TP CE device and goes out |
| without the outer ethernet header and with a vlan tag. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| # on the reverse path |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| ( |
| port_to_mpls_label_pw, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_dst_mac_str, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| egress_tags=1 |
| ) |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[out_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[out_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected tcp packet |
| # with a vlan tag |
| parsed_pkt = simple_tcp_packet( |
| pktlen=82, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[out_port] |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class DoubleTaggedPWTermination( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to test the PW Termination. The traffic |
| arrives untagged to the MPLS-TP CE device and goes out |
| without the outer ethernet header and 2 vlan tags. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| # on the reverse path |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| ingress_tags=2, |
| egress_tag = EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| ( |
| port_to_mpls_label_pw, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_dst_mac_str, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| egress_tags=2 |
| ) |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[out_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[out_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[out_port] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected tcp |
| # packet with two vlan tags |
| parsed_pkt = simple_tcp_packet_two_vlan( |
| pktlen=82, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_2[out_port], |
| in_dl_vlan_enable=True, |
| in_vlan_vid=port_to_in_vlan_1[out_port] |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| class IntermediateTransport( base_tests.SimpleDataPlane ): |
| """ |
| This test is meant to verify that the alternative approach for handling |
| pseudowires in spine switches. Specifically, in the mpls table we install |
| 2 rules , the match(SR1, BoS=1) and match(SR2, BoS=0). The match(SR2, BoS=0) |
| should match and the packet should be forwarded through the port and the label |
| for SR2 should be removed. |
| """ |
| def runTest( self ): |
| Groups = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| in_port = ports[0] |
| out_port = ports[1] |
| out_vlan = 4094 |
| src_mac = [ 0x00, 0x00, 0x00, 0x00, 0x11, 0x01 ] |
| src_mac_str = ':'.join( [ '%02X' % x for x in src_mac ] ) |
| dst_mac = [ 0x00, 0x00, 0x00, 0x11, 0x11, 0x01 ] |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| mpls_label = 100 |
| mpls_label_SR1 = 100 + 5 |
| mpls_label_SR2 = 100 + 10 |
| mpls_label_PW = 100 + 15 |
| |
| # Add l2 interface group, we have to pop the VLAN; |
| l2_intf_gid, l2_intf_msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=out_vlan, |
| is_tagged=False, |
| send_barrier=False |
| ) |
| Groups._put( l2_intf_gid ) |
| |
| # add MPLS interface group |
| mpls_intf_gid, mpls_intf_msg = add_mpls_intf_group( |
| ctrl=self.controller, |
| ref_gid=l2_intf_gid, |
| dst_mac=dst_mac, |
| src_mac=src_mac, |
| vid=out_vlan, |
| index=in_port |
| ) |
| Groups._put( mpls_intf_gid ) |
| |
| # Add L3 Unicast group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=out_vlan, |
| id=in_port, |
| src_mac=src_mac, |
| dst_mac=dst_mac |
| ) |
| Groups._put( l3_msg.group_id ) |
| |
| # Add L3 ecmp group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=in_port, |
| l3_ucast_groups=[ l3_msg.group_id ] |
| ) |
| Groups._put( ecmp_msg.group_id ) |
| |
| # Add MPLS flow with BoS=1 |
| add_mpls_flow( |
| ctrl=self.controller, |
| action_group_id=ecmp_msg.group_id, |
| label=mpls_label_SR1 |
| ) |
| |
| # add MPLS flow with BoS=0 |
| add_mpls_flow_pw( |
| ctrl=self.controller, |
| action_group_id=mpls_intf_gid, |
| label=mpls_label_SR2, |
| ethertype=0x8847, |
| tunnel_index=1, |
| bos=0 |
| ) |
| |
| # add Termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x8847, |
| dst_mac=src_mac, |
| vlanid=out_vlan, |
| goto_table=23 |
| ) |
| # add VLAN flows |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=out_vlan, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG, |
| ) |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=out_vlan, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| # Packet generation with sleep |
| time.sleep(2) |
| label_SR1 = (mpls_label_SR1, 0, 1, 32) |
| label_SR2 = (mpls_label_SR2, 0, 0, 32) |
| label_2 = (mpls_label_PW, 0, 1, 32) |
| |
| # set to false to test if routing traffic |
| # comes through |
| |
| pw = True |
| if pw: |
| parsed_pkt = mpls_packet( |
| pktlen=104, |
| ip_ttl=63, |
| eth_dst=src_mac_str, |
| label=[label_SR2, label_2], |
| encapsulated_ethernet = True |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| |
| |
| expected_label = (mpls_label_PW, 0, 1, 31) |
| # we geneate the expected pw packet |
| parsed_pkt = mpls_packet( |
| pktlen=100, |
| ip_ttl=63, |
| eth_dst=dst_mac_str, |
| eth_src=src_mac_str, |
| label=[ expected_label ], |
| encapsulated_ethernet = True |
| ) |
| |
| pkt = str( parsed_pkt ) |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| else: |
| # packet for routing traffic |
| parsed_pkt_2 = mpls_packet( |
| pktlen=104, |
| ip_ttl=63, |
| eth_dst=src_mac_str, |
| label=[ label_SR1 ] |
| ) |
| pkt_2 = str(parsed_pkt_2) |
| self.dataplane.send( in_port, pkt_2 ) |
| |
| # we geneate the expected routed packet |
| parsed_pkt_2 = simple_tcp_packet( |
| pktlen=100, |
| ip_ttl=31, |
| eth_dst=dst_mac_str, |
| eth_src=src_mac_str, |
| ) |
| pkt_2 = str(parsed_pkt_2) |
| |
| verify_packet( self, pkt_2, out_port) |
| verify_no_packet( self, pkt_2, in_port ) |
| |
| verify_no_other_packets( self ) |
| finally: |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_all_groups( self.controller ) |
| |
| class PseudowireSpineTerminationBug( base_tests.SimpleDataPlane ): |
| """ |
| This is meant to demonstrate a bug observed in the termination of |
| Leaf-Spine pseudowires, where the termination point at the spine |
| is a port connecting to another leaf switch. |
| In this case, there exist two L2 interface groups in the device for the |
| same port : |
| |
| L2 interface for routing : POP_VLAN, output to port |
| L2 interface for pseudowire : outpute to port |
| |
| The choice of the l2 interface group is associated with the vlan id of the packet. |
| In both cases, packets arrive with untagged vlan and are associated with vlan-id 4094. |
| However, in pw case the outer l2 is popped, and the vlan-id changes (that of the original |
| traffic) which matches the L2 interface group for the pw. |
| |
| The bug is that still the group that is chossen is that for routing, which pops the vlan, |
| and thus the pseudowire results with untagged traffic. |
| """ |
| def runTest( self ): |
| |
| Groups = Queue.LifoQueue( ) |
| Groups2 = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| for pair in itertools.product(ports, ports): |
| # we generate all possible products |
| in_port = pair[0] |
| out_port = pair[1] |
| if out_port == in_port: |
| continue |
| # we fill the pipeline for the pw initiation |
| # on the reverse path |
| ( |
| port_to_mpls_label_2, |
| port_to_mpls_label_1, |
| port_to_mpls_label_pw, |
| port_to_in_vlan_3, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_src_mac_str, |
| port_to_dst_mac_str, |
| Groups ) = fill_pw_initiation_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=out_port, |
| out_port=in_port, |
| ingress_tags=1, |
| egress_tag=EGRESS_TAGGED, |
| mpls_labels=1 |
| ) |
| # we fill the pipeline for the pw termination |
| ( |
| port_to_mpls_label_pw, |
| port_to_in_vlan_2, |
| port_to_in_vlan_1, |
| port_to_dst_mac_str, |
| Groups2 ) = fill_pw_termination_pipeline( |
| controller=self.controller, |
| logging=logging, |
| in_port=in_port, |
| out_port=out_port, |
| egress_tags=1 |
| ) |
| |
| print('''\nBefore adding the l2 interface group that pops the vlan we expect to see tagged packets at the output. ''') |
| |
| # we generate the pw packet |
| label_pw = (port_to_mpls_label_pw[out_port], 0, 1, 63) |
| cw = (0, 0, 0, 0) |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[out_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we generate the expected tcp packet |
| # with a vlan tag |
| parsed_pkt = simple_tcp_packet( |
| pktlen=82, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[out_port] |
| ) |
| pkt = str( parsed_pkt ) |
| |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| print('''After adding the l2 interface group that pops the vlan, packets will come out UNTAGGED and test will fail. Check logs for details.''') |
| # we create an l2 interface group for routing that |
| # pops the vlan tags |
| l2_intf_gid, l2_intf_msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=4094, |
| is_tagged=False, |
| send_barrier=False |
| ) |
| Groups._put( l2_intf_gid ) |
| |
| parsed_pkt = pw_packet( |
| pktlen=104, |
| out_eth_dst=port_to_dst_mac_str[in_port], |
| label=[label_pw], |
| cw=cw, |
| out_dl_vlan_enable=True, |
| out_vlan_vid=port_to_in_vlan_1[out_port], |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| |
| parsed_pkt = simple_tcp_packet( |
| pktlen=82, |
| dl_vlan_enable=True, |
| vlan_vid=port_to_in_vlan_1[out_port] |
| ) |
| pkt = str( parsed_pkt ) |
| |
| # send the packet, test should fail now |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| finally: |
| delete_all_flows( self.controller ) |
| delete_groups( self.controller, Groups ) |
| delete_groups( self.controller, Groups2 ) |
| delete_all_groups( self.controller ) |
| |
| |
| class BoSBug( base_tests.SimpleDataPlane ): |
| """ |
| This test is meant to verify the forwarding of the default traffic |
| when the rule for the PW transport (BoS=0) has been installed in the |
| switch, together with the rule for the transport of default routing |
| traffic. There is a bug in OFDPA 3.0EA4, which requires BOS=0 flow |
| to be installed before BOS=1 flow to generate correct packets. Incoming |
| packet has 1 label, and there is no VLAN tag in the incoming packet. |
| The expected behvior is the Pop of the outer MPLS label and plain IP |
| packet should exit from the switch. |
| """ |
| def runTest( self ): |
| Groups = Queue.LifoQueue( ) |
| try: |
| if len( config[ "port_map" ] ) < 1: |
| logging.info( "Port count less than 1, can't run this case" ) |
| assert (False) |
| return |
| ports = config[ "port_map" ].keys( ) |
| in_port = ports[0] |
| out_port = ports[1] |
| out_vlan = 4094 |
| src_mac = [ 0x00, 0x00, 0x00, 0x00, 0x11, 0x01 ] |
| src_mac_str = ':'.join( [ '%02X' % x for x in src_mac ] ) |
| dst_mac = [ 0x00, 0x00, 0x00, 0x11, 0x11, 0x01 ] |
| dst_mac_str = ':'.join( [ '%02X' % x for x in dst_mac ] ) |
| mpls_label = 100 |
| # Add l2 interface group, we have to pop the VLAN; |
| l2_intf_gid, l2_intf_msg = add_one_l2_interface_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlan_id=out_vlan, |
| is_tagged=False, |
| send_barrier=False |
| ) |
| Groups._put( l2_intf_gid ) |
| # add MPLS interface group |
| mpls_intf_gid, mpls_intf_msg = add_mpls_intf_group( |
| ctrl=self.controller, |
| ref_gid=l2_intf_gid, |
| dst_mac=dst_mac, |
| src_mac=src_mac, |
| vid=out_vlan, |
| index=in_port |
| ) |
| Groups._put( mpls_intf_gid ) |
| # Add L3 Unicast group |
| l3_msg = add_l3_unicast_group( |
| ctrl=self.controller, |
| port=out_port, |
| vlanid=out_vlan, |
| id=in_port, |
| src_mac=src_mac, |
| dst_mac=dst_mac |
| ) |
| Groups._put( l3_msg.group_id ) |
| # Add L3 ecmp group |
| ecmp_msg = add_l3_ecmp_group( |
| ctrl=self.controller, |
| id=in_port, |
| l3_ucast_groups=[ l3_msg.group_id ] |
| ) |
| Groups._put( ecmp_msg.group_id ) |
| # Add MPLS flow with BoS=1 |
| add_mpls_flow( |
| ctrl=self.controller, |
| action_group_id=ecmp_msg.group_id, |
| label=mpls_label |
| ) |
| # add MPLS flow with BoS=0 |
| add_mpls_flow_pw( |
| ctrl=self.controller, |
| action_group_id=mpls_intf_gid, |
| label=mpls_label, |
| ethertype=0x8847, |
| tunnel_index=1, |
| bos=0 |
| ) |
| # add Termination flow |
| add_termination_flow( |
| ctrl=self.controller, |
| in_port=in_port, |
| eth_type=0x8847, |
| dst_mac=src_mac, |
| vlanid=out_vlan, |
| goto_table=23 |
| ) |
| # add VLAN flows |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=out_vlan, |
| flag=VLAN_TABLE_FLAG_ONLY_TAG, |
| ) |
| add_one_vlan_table_flow( |
| ctrl=self.controller, |
| of_port=in_port, |
| vlan_id=out_vlan, |
| flag=VLAN_TABLE_FLAG_ONLY_UNTAG |
| ) |
| # Packet generation with sleep |
| time.sleep(2) |
| label = (mpls_label, 0, 0, 32) |
| parsed_pkt = mpls_packet( |
| pktlen=104, |
| vlan_vid=out_vlan, |
| ip_ttl=63, |
| eth_dst=src_mac_str, |
| label=[ label ] |
| ) |
| pkt = str( parsed_pkt ) |
| self.dataplane.send( in_port, pkt ) |
| # we geneate the expected pw packet |
| parsed_pkt = simple_tcp_packet( |
| pktlen=100, |
| vlan_vid=out_vlan, |
| ip_ttl=31, |
| eth_dst=dst_mac_str, |
| eth_src=src_mac_str, |
| ) |
| pkt = str( parsed_pkt ) |
| # Assertions |
| verify_packet( self, pkt, out_port ) |
| verify_no_packet( self, pkt, in_port ) |
| verify_no_other_packets( self ) |
| finally: |
| print("SHOULD CLEAR STATE HERE") |
| # delete_all_flows( self.controller ) |
| # delete_groups( self.controller, Groups ) |
| # delete_all_groups( self.controller ) |
| |
| class ClearAll( base_tests.SimpleDataPlane ): |
| |
| def runTest( self ): |
| delete_all_flows( self.controller ) |
| delete_all_groups( self.controller ) |
| |
| |
| |
| |