| """These tests fall under Conformance Test-Suite (OF-SWITCH-1.0.0 TestCases). |
| Refer Documentation -- Detailed testing methodology |
| <Some of test-cases are directly taken from oftest> """ |
| |
| "Test Suite 3 --> Detailed Controller to switch messages" |
| |
| import logging |
| |
| import unittest |
| import random |
| |
| from oftest import config |
| import oftest.controller as controller |
| import ofp |
| import oftest.dataplane as dataplane |
| import oftest.parse as parse |
| import oftest.base_tests as base_tests |
| |
| from oftest.testutils import * |
| from time import sleep |
| from FuncUtils import * |
| |
| class OverlapChecking(base_tests.SimpleDataPlane): |
| |
| """Verify that if overlap check flag is set in the flow entry and an overlapping flow is inserted then an error |
| is generated and switch refuses flow entry""" |
| |
| def runTest(self): |
| |
| logging.info("Running Overlap_Checking test") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear Switch State |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting two overlapping flows") |
| logging.info("Expecting switch to return an error") |
| |
| #Insert a flow F with wildcarded all fields |
| (pkt,match) = wildcard_all(self,of_ports) |
| |
| #Verify flow is active |
| verify_tablestats(self,expect_active=1) |
| |
| # Build a overlapping flow F'-- Wildcard All except ingress with check overlap bit set |
| pkt_matchingress = simple_tcp_packet() |
| match3 = parse.packet_to_flow_match(pkt_matchingress) |
| self.assertTrue(match3 is not None, "Could not generate flow match from pkt") |
| match3.wildcards = ofp.OFPFW_ALL-ofp.OFPFW_IN_PORT |
| match3.in_port = of_ports[0] |
| |
| msg3 = ofp.message.flow_add() |
| msg3.match = match3 |
| msg3.flags |= ofp.OFPFF_CHECK_OVERLAP |
| msg3.cookie = random.randint(0,9007199254740992) |
| msg3.buffer_id = 0xffffffff |
| |
| act3 = ofp.action.output() |
| act3.port = of_ports[1] |
| msg3.actions.append(act3) |
| self.controller.message_send(msg3) |
| do_barrier(self.controller) |
| |
| # Verify Flow does not get inserted |
| verify_tablestats(self,expect_active=1) |
| |
| #Verify OFPET_FLOW_MOD_FAILED/OFPFMFC_OVERLAP error is recieved on the control plane |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_ERROR, |
| timeout=5) |
| self.assertTrue(response is not None, |
| 'Switch did not reply with error message') |
| self.assertTrue(response.err_type==ofp.OFPET_FLOW_MOD_FAILED, |
| 'Error message type is not flow mod failed ') |
| self.assertTrue(response.code==ofp.OFPFMFC_OVERLAP, |
| 'Error Message code is not overlap') |
| |
| |
| class NoOverlapChecking(base_tests.SimpleDataPlane): |
| |
| """Verify that without overlap check flag set, overlapping flows can be created.""" |
| |
| def runTest(self): |
| |
| logging.info("Running No_Overlap_Checking test") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear Switch State |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting two overlapping flows") |
| logging.info("Expecting switch to insert the flows without generating errors") |
| |
| #Build a flow F with wildcarded all fields. |
| (pkt,match) = wildcard_all(self,of_ports) |
| |
| #Verify flow is active |
| verify_tablestats(self,expect_active=1) |
| |
| # Build a overlapping flow F' without check overlap bit set. |
| wildcard_all_except_ingress(self,of_ports) |
| |
| # Verify Flow gets inserted |
| verify_tablestats(self,expect_active=2) |
| |
| |
| class IdenticalFlows(base_tests.SimpleDataPlane): |
| |
| """Verify that adding two identical flows overwrites the existing one and clears counters""" |
| |
| def runTest(self): |
| |
| logging.info("Running Identical_Flows test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting two identical flows one by one") |
| logging.info("Expecting switch to overwrite the first flow and clear the counters associated with it ") |
| |
| # Create and add flow-1, check on dataplane it is active. |
| (pkt,match) = wildcard_all(self,of_ports) |
| |
| # Verify active_entries in table_stats_request =1 |
| verify_tablestats(self,expect_active=1) |
| |
| # Send Packet (to increment counters like byte_count and packet_count) |
| send_packet(self,pkt,of_ports[0],of_ports[1]) |
| |
| # Verify Flow counters have incremented |
| verify_flow_stats(self, match, pkts=1, bytes=len(str(pkt))) |
| |
| #Send Identical flow |
| (pkt1,match1) = wildcard_all(self,of_ports) |
| |
| # Verify active_entries in table_stats_request =1 |
| verify_tablestats(self,expect_active=1) |
| |
| # Verify Flow counters reset |
| verify_flow_stats(self, match, pkts=0, bytes=0) |
| |
| |
| class EmerFlowTimeout(base_tests.SimpleProtocol): |
| |
| """Timeout values are not allowed for emergency flows""" |
| |
| def runTest(self): |
| |
| logging.info("Running Emergency_Flow_Timeout test") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting an emergency flow with timeout values") |
| logging.info("Expecting switch to generate error ") |
| |
| #Insert an emergency flow |
| pkt = simple_tcp_packet() |
| match = parse.packet_to_flow_match(pkt) |
| match.in_port = of_ports[0] |
| |
| request = ofp.message.flow_add() |
| request.match = match |
| request.flags = request.flags|ofp.OFPFF_EMERG |
| request.hard_timeout =9 |
| request.idle_timeout =9 |
| |
| act = ofp.action.output() |
| act.port = of_ports[1] |
| |
| request.actions.append(act) |
| logging.info("Inserting flow") |
| self.controller.message_send(request) |
| |
| do_barrier(self.controller) |
| |
| #Verify OFPET_FLOW_MOD_FAILED/OFPFMFC_OVERLAP error is recieved on the control plane |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_ERROR, |
| timeout=5) |
| self.assertTrue(response is not None, |
| 'Switch did not reply with error message') |
| self.assertTrue(response.err_type==ofp.OFPET_FLOW_MOD_FAILED, |
| 'Error message type is not flow mod failed ') |
| self.assertTrue(response.code==ofp.OFPFMFC_BAD_EMERG_TIMEOUT, |
| 'Error Message code is not bad emergency timeout') |
| |
| |
| class MissingModifyAdd(base_tests.SimpleDataPlane): |
| |
| """If a modify does not match an existing flow, the flow gets added """ |
| |
| def runTest(self): |
| |
| logging.info("Running Missing_Modify_Add test") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| logging.info("Inserting a flow-modify that does not match an existing flow") |
| logging.info("Expecting flow to get added i.e OFPFC_MODIFY command should be taken as OFPFC_ADD ") |
| |
| #Clear Switch State |
| delete_all_flows(self.controller) |
| |
| #Generate a flow-mod,command OFPC_MODIFY |
| |
| request = ofp.message.flow_modify() |
| request.match.wildcards = ofp.OFPFW_ALL-ofp.OFPFW_IN_PORT |
| request.match.in_port = of_ports[0] |
| request.cookie = random.randint(0,9007199254740992) |
| request.buffer_id = 0xffffffff |
| act3 = ofp.action.output() |
| act3.port = of_ports[1] |
| request.actions.append(act3) |
| |
| logging.info("Inserting flow") |
| self.controller.message_send(request) |
| do_barrier(self.controller) |
| |
| #Verify the flow gets added i.e. active_count= 1 |
| verify_tablestats(self,expect_active=1) |
| |
| |
| class ModifyAction(base_tests.SimpleDataPlane): |
| |
| """A modified flow preserves counters""" |
| |
| def runTest(self): |
| |
| logging.info("Running Modify_Action test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting a Flow and incrementing flow counters. Modifying the flow action") |
| logging.info("Expecting the flow action to be modified , but the flow-counters should be preserved") |
| |
| #Create and add flow-1 Match on all, except one wildcarded (src adddress).Action A , output to of_port[1] |
| (pkt,match) = match_all_except_source_address(self,of_ports) |
| |
| #Send Packet matching the flow thus incrementing counters like packet_count,byte_count |
| send_packet(self,pkt,of_ports[0],of_ports[1]) |
| |
| #Verify flow counters |
| verify_flow_stats(self, match, pkts=1, bytes=len(str(pkt))) |
| |
| #Modify flow- 1 |
| modify_flow_action(self,of_ports,match) |
| |
| # Send Packet matching the flow-1 i.e ingress_port=port[0] and verify it is recieved on corret dataplane port i.e port[2] |
| send_packet(self,pkt,of_ports[0],of_ports[2]) |
| |
| #Verify flow counters are preserved |
| verify_flow_stats(self, match, pkts=2, bytes=len(str(pkt))*2) |
| |
| |
| class StrictModifyAction(base_tests.SimpleDataPlane): |
| |
| """Strict Modify Flow also changes action preserves counters""" |
| |
| def runTest(self): |
| |
| logging.info("Running Strict_Modify_Action test") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting Flows and incrementing flow counters. Strict Modify the flow action ") |
| logging.info("Expecting the flow action to be modified , but the flow-counters should be preserved") |
| |
| #Create and add flow-1 Match on all, except one wildcarded (src adddress).Action A |
| (pkt,match) = match_all_except_source_address(self,of_ports,priority=100) |
| |
| #Create and add flow-2 , Match on ingress_port only, Action A |
| (pkt1,match1) = wildcard_all_except_ingress(self,of_ports,priority=10) |
| |
| # Verify both the flows are active |
| verify_tablestats(self,expect_active=2) |
| |
| #Send a packet matching the flows, thus incrementing flow-counters (packet matches the flow F-1 with higher priority) |
| send_packet(self,pkt,of_ports[0],of_ports[1]) |
| |
| # Verify flow counters of the flow-1 |
| verify_flow_stats(self, match, pkts=1, bytes=len(str(pkt))) |
| |
| # Strict-Modify flow- 1 |
| strict_modify_flow_action(self,of_ports[2],match,priority=100) |
| |
| # Send Packet matching the flow-1 i.e ingress_port=port[0] and verify it is recieved on corret dataplane port i.e port[2] |
| send_packet(self,pkt,of_ports[0],of_ports[2]) |
| |
| # Verify flow counters are preserved |
| verify_flow_stats(self, match, pkts=2, bytes=2*len(str(pkt))) |
| |
| |
| class DeleteNonexistingFlow(base_tests.SimpleDataPlane): |
| |
| """Request deletion of non-existing flow""" |
| |
| def runTest(self): |
| |
| logging.info("Delete_NonExisting_Flow test begins") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Deleting a non-existing flow") |
| logging.info("Expecting switch to ignore the command , without generating errors") |
| |
| # Issue a delete command |
| msg = ofp.message.flow_delete() |
| msg.match.wildcards = ofp.OFPFW_ALL |
| msg.out_port = ofp.OFPP_NONE |
| msg.buffer_id = 0xffffffff |
| |
| # Verify no message or error is generated by polling the the control plane |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_ERROR, |
| timeout=2) |
| self.assertTrue(response is None, |
| 'Recieved Error for deleting non-exiting flow ') |
| |
| |
| |
| class SendFlowRem(base_tests.SimpleDataPlane): |
| |
| """Check deletion of flows happens and generates messages as configured. |
| If Send Flow removed message Flag is set in the flow entry, the flow deletion of that respective flow should generate the flow removed message, |
| vice versa also exists """ |
| |
| def runTest(self): |
| |
| logging.info("Running Send_Flow_Rem test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear swicth state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting flows F1 and F2 without and with send_flow_removed_message flag set ") |
| logging.info("Deleting the flows") |
| logging.info("Expecting flow removed message only for F2") |
| |
| # Insert flow-1 with F without OFPFF_SEND_FLOW_REM flag set. |
| (pkt,match) = wildcard_all_except_ingress(self,of_ports) |
| |
| # Verify flow is inserted |
| verify_tablestats(self,expect_active=1) |
| |
| #Delete the flow-1 |
| nonstrict_delete(self,match,priority=0) |
| |
| # Verify no flow removed message is generated for the FLOW-1 |
| |
| (response1, pkt1) = self.controller.poll(exp_msg=ofp.OFPT_FLOW_REMOVED, |
| timeout=2) |
| self.assertTrue(response1 is None, |
| 'Received flow removed message for the flow with flow_rem flag not set') |
| |
| # Insert another flow F' with OFPFF_SEND_FLOW_REM flag set. |
| msg9 = ofp.message.flow_add() |
| msg9.match.wildcards = ofp.OFPFW_ALL |
| msg9.cookie = random.randint(0,9007199254740992) |
| msg9.buffer_id = 0xffffffff |
| msg9.idle_timeout = 1 |
| msg9.flags |= ofp.OFPFF_SEND_FLOW_REM |
| rv1 = self.controller.message_send(msg9) |
| self.assertTrue(rv1 != -1, "Error installing flow mod") |
| do_barrier(self.controller) |
| |
| # Delete the flow-2 |
| delete_all_flows(self.controller) |
| |
| # Verify flow removed message is generated for the FLOW-2 |
| |
| (response2, pkt2) = self.controller.poll(exp_msg=ofp.OFPT_FLOW_REMOVED, |
| timeout=2) |
| self.assertTrue(response2 is not None, |
| 'Did not receive flow removed message for this flow') |
| |
| |
| class DeleteEmerFlow(base_tests.SimpleProtocol): |
| |
| """Delete emergency flow and verify no message is generated.An emergency flow deletion will not generate flow-removed messages even if |
| Send Flow removed message flag was set during the emergency flow entry""" |
| |
| def runTest(self): |
| |
| logging.info("Running Delete_Emer_Flow") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting a emergency flow with send_flow_removed flag set") |
| logging.info("Expecting no flow_removed_message on the deletion of the emergency flow") |
| |
| # Insert a flow with emergency bit set. |
| pkt = simple_tcp_packet() |
| match = parse.packet_to_flow_match(pkt) |
| match.in_port = of_ports[0] |
| request = ofp.message.flow_add() |
| request.match = match |
| request.flags = request.flags|ofp.OFPFF_EMERG|ofp.OFPFF_SEND_FLOW_REM |
| act = ofp.action.output() |
| act.port = of_ports[1] |
| request.actions.append(act) |
| |
| self.controller.message_send(request) |
| |
| # Delete the emergency flow |
| |
| nonstrict_delete(self,match) |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPFF_SEND_FLOW_REM , |
| timeout=2) |
| self.assertTrue(response is None, |
| 'Test Failed ') |
| |
| |
| class StrictVsNonstrict(base_tests.SimpleDataPlane): |
| |
| """Delete and verify strict and non-strict behaviors |
| This test compares the behavior of delete strict and non-strict""" |
| |
| def runTest(self): |
| |
| logging.info("Strict_Vs_Nonstrict test begins") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting a flow with exact match") |
| logging.info("Issue Strict Delete command , verify it gets deleted") |
| |
| #Insert F with an exact Match |
| (pkt,match) = exact_match(self,of_ports) |
| verify_tablestats(self,expect_active=1) |
| |
| #Issue Strict Delete Command , verify F gets deleted. |
| strict_delete(self,match) |
| verify_tablestats(self,expect_active=0) |
| |
| logging.info("Inserting two overlapping flows") |
| logging.info("Issue Strict Delete command ") |
| logging.info("Expecting only one flow gets deleted , because Strict Delete matches on wildcards as well") |
| |
| #Insert Flow T with match on all , except one wildcarded ( say src adddress ). |
| (pkt,match) = match_all_except_source_address(self,of_ports) |
| |
| #Insert another flow T' with match on ingress_port , wildcarded rest. |
| (pkt1,match1) = wildcard_all_except_ingress(self,of_ports) |
| verify_tablestats(self,expect_active=2) |
| |
| #Issue Strict Delete matching on ingress_port. Verify only T' gets deleted |
| strict_delete(self,match1) |
| verify_tablestats(self,expect_active=1) |
| |
| logging.info("Inserting two overlapping flows") |
| logging.info("Issue Non-Strict Delete command ") |
| logging.info("Expecting both the flow gets deleted , because wildcards are active") |
| |
| #Insert T and T' again . |
| (pkt,match) = match_all_except_source_address(self,of_ports) |
| (pkt1,match1) = wildcard_all_except_ingress(self,of_ports) |
| verify_tablestats(self,expect_active=2) |
| |
| #Issue Non-strict Delete with match on ingress_port.Verify T+T' gets deleted . |
| nonstrict_delete(self,match1) |
| verify_tablestats(self,expect_active=0) |
| |
| logging.info("Inserting three overlapping flows with different priorities") |
| logging.info("Issue Non-Strict Delete command ") |
| logging.info("Expecting all the flows to get deleted") |
| |
| #Insert T , add Priority P (say 100 ) |
| (pkt,match) = match_all_except_source_address(self,of_ports,priority=100) |
| |
| #Insert T' add priority (200). |
| (pkt1,match1) = wildcard_all_except_ingress(self,of_ports,priority=200) |
| |
| #Insert T' again add priority 300 --> T" . |
| (pkt2,match2) = wildcard_all_except_ingress(self,of_ports,priority=300) |
| verify_tablestats(self,expect_active=3) |
| |
| #Issue Non-Strict Delete and verify all getting deleted |
| nonstrict_delete(self,match1,priority=200) |
| verify_tablestats(self,expect_active=0) |
| |
| logging.info("Inserting three overlapping flows with different priorities") |
| logging.info("Issue Strict Delete command ") |
| logging.info("Expecting only one to get deleted because here priorities & wildcards are being matched") |
| |
| #Issue Strict-Delete and verify only T'' gets deleted. |
| (pkt,match) = match_all_except_source_address(self,of_ports,priority=100) |
| (pkt1,match1) = wildcard_all_except_ingress(self,of_ports,priority=200) |
| (pkt2,match2) = wildcard_all_except_ingress(self,of_ports,priority=300) |
| strict_delete(self,match1,priority=200) |
| verify_tablestats(self,expect_active=2) |
| |
| |
| |
| class Outport1(base_tests.SimpleDataPlane): |
| |
| """Delete flows filtered by action outport.If the out_port field in the delete command contains a value other than OFPP_NONE, |
| it introduces a constraint when matching. This constraint is that the rule must contain an output action directed at that port.""" |
| |
| def runTest(self): |
| |
| logging.info("Outport1 test begins") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting a flow with output action --> of_port[1]") |
| logging.info("Deleting the flow but with out_port set to of_port[2]") |
| logging.info("Expecting switch to filter the delete command") |
| |
| #Build and send Flow-1 with action output to of_port[1] |
| (pkt,match) = wildcard_all_except_ingress(self,of_ports) |
| |
| # Verify active_entries in table_stats_request = 1 |
| verify_tablestats(self,expect_active=1) |
| |
| #Send delete command matching the flow-1 but with contraint out_port = of_port[2] |
| msg7 = ofp.message.flow_delete() |
| msg7.out_port = of_ports[2] |
| msg7.buffer_id = 0xffffffff |
| msg7.match = match |
| |
| self.controller.message_send(msg7) |
| do_barrier(self.controller) |
| |
| # Verify flow will not get deleted, active_entries in table_stats_request = 1 |
| verify_tablestats(self,expect_active=1) |
| |
| logging.info("Deleting the flow with out_port set to of_port[1]") |
| logging.info("Expecting switch to delete the flow") |
| |
| #Send Delete command with contraint out_port = of_ports[1] |
| msg7 = ofp.message.flow_delete() |
| msg7.out_port = of_ports[1] |
| msg7.buffer_id = 0xffffffff |
| msg7.match = match |
| |
| self.controller.message_send(msg7) |
| do_barrier(self.controller) |
| |
| #Verify flow gets deleted. |
| verify_tablestats(self,expect_active=0) |
| |
| |
| class IdleTimeout(base_tests.SimpleDataPlane): |
| |
| """ Verify that idle timeout is implemented""" |
| |
| def runTest(self): |
| |
| logging.info("Running Idle_Timeout test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting flow entry with idle_timeout set. Also send_flow_removed_message flag set") |
| logging.info("Expecting the flow entry to delete with given idle_timeout") |
| |
| #Insert a flow entry with idle_timeout=1.Send_Flow_Rem flag set |
| msg9 = ofp.message.flow_add() |
| msg9.match.wildcards = ofp.OFPFW_ALL |
| msg9.cookie = random.randint(0,9007199254740992) |
| msg9.buffer_id = 0xffffffff |
| msg9.idle_timeout = 1 |
| msg9.flags |= ofp.OFPFF_SEND_FLOW_REM |
| rv1 = self.controller.message_send(msg9) |
| self.assertTrue(rv1 != -1, "Error installing flow mod") |
| do_barrier(self.controller) |
| |
| #Verify flow gets inserted |
| verify_tablestats(self,expect_active=1) |
| |
| # Verify flow removed message is recieved. |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_FLOW_REMOVED, |
| timeout=5) |
| self.assertTrue(response is not None, |
| 'Did not receive flow removed message ') |
| self.assertEqual(ofp.OFPRR_IDLE_TIMEOUT, response.reason, |
| 'Flow table entry removal reason is not idle_timeout') |
| self.assertEqual(1, response.duration_sec, |
| 'Flow was not alive for 1 sec') |
| |
| sleep(1) |
| |
| |
| class Outport2(base_tests.SimpleDataPlane): |
| |
| """Add, modify flows with outport set. This field is ignored by ADD, MODIFY, and MODIFY STRICT messages.""" |
| |
| def runTest(self): |
| |
| logging.info("Running Outport2 test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Adding and modifying flow with out_port fields set") |
| logging.info("Expecting switch to ignore out_port") |
| |
| # Create and add flow-1,Action A ,output to port of_port[1], out_port set to of_ports[2] |
| (pkt,match) = wildcard_all_except_ingress(self,of_ports) |
| |
| # Verify flow is active |
| verify_tablestats(self,expect_active=1) |
| |
| # Send Packet matching the flow |
| send_packet(self,pkt,of_ports[0],of_ports[1]) |
| |
| # Insert Flow-Modify matching flow F-1 ,action A', output to port[2], out_port set to port[3] |
| modify_flow_action(self,of_ports,match) |
| |
| # Again verify active_entries in table_stats_request =1 |
| verify_tablestats(self,expect_active=1) |
| |
| #Verify action is modified |
| send_packet(self,pkt,of_ports[0],of_ports[2]) |
| |
| |
| |
| |
| class HardTimeout(base_tests.SimpleDataPlane): |
| |
| """ Verify that hard timeout is implemented """ |
| |
| def runTest(self): |
| |
| logging.info("Running Hard_Timeout test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting flow entry with hard_timeout set. Also send_flow_removed_message flag set") |
| logging.info("Expecting the flow entry to delete with given hard_timeout") |
| |
| # Insert a flow entry with hardtimeout=1 and send_flow_removed flag set |
| msg9 = ofp.message.flow_add() |
| msg9.match.wildcards = ofp.OFPFW_ALL |
| msg9.cookie = random.randint(0,9007199254740992) |
| msg9.buffer_id = 0xffffffff |
| msg9.hard_timeout = 1 |
| msg9.flags |= ofp.OFPFF_SEND_FLOW_REM |
| rv1 = self.controller.message_send(msg9) |
| self.assertTrue(rv1 != -1, "Error installing flow mod") |
| do_barrier(self.controller) |
| |
| #Verify flow gets inserted |
| verify_tablestats(self,expect_active=1) |
| |
| # Verify flow removed message is recieved. |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_FLOW_REMOVED, |
| timeout=5) |
| self.assertTrue(response is not None, |
| 'Did not receive flow removed message ') |
| self.assertEqual(ofp.OFPRR_HARD_TIMEOUT, response.reason, |
| 'Flow table entry removal reason is not hard_timeout') |
| self.assertEqual(1, response.duration_sec, |
| 'Flow was not alive for 1 sec') |
| |
| sleep(1) |
| |
| |
| class FlowTimeout(base_tests.SimpleDataPlane): |
| |
| """Verify that Flow removed messages are generated as expected |
| Flow removed messages being generated when flag is set, is already tested in the above tests |
| So here, we test the vice-versa condition""" |
| |
| |
| def runTest(self): |
| |
| logging.info("Running Flow_Timeout test ") |
| |
| of_ports = config["port_map"].keys() |
| of_ports.sort() |
| self.assertTrue(len(of_ports) > 1, "Not enough ports for test") |
| |
| #Clear switch state |
| delete_all_flows(self.controller) |
| |
| logging.info("Inserting flow entry with hard_timeout set and send_flow_removed_message flag not set") |
| logging.info("Expecting the flow entry to delete, but no flow removed message") |
| |
| # Insert a flow with hard_timeout = 1 but no Send_Flow_Rem flag set |
| pkt = simple_tcp_packet() |
| match3 = parse.packet_to_flow_match(pkt) |
| self.assertTrue(match3 is not None, "Could not generate flow match from pkt") |
| match3.wildcards = ofp.OFPFW_ALL-ofp.OFPFW_IN_PORT |
| match3.in_port = of_ports[0] |
| msg3 = ofp.message.flow_add() |
| msg3.out_port = of_ports[2] # ignored by flow add,flow modify |
| msg3.cookie = random.randint(0,9007199254740992) |
| msg3.buffer_id = 0xffffffff |
| msg3.hard_timeout = 1 |
| msg3.buffer_id = 0xffffffff |
| msg3.match = match3 |
| act3 = ofp.action.output() |
| act3.port = of_ports[1] |
| msg3.actions.append(act3) |
| |
| self.controller.message_send(msg3) |
| do_barrier(self.controller) |
| |
| #Verify no flow removed message is generated |
| (response, pkt) = self.controller.poll(exp_msg=ofp.OFPT_FLOW_REMOVED, |
| timeout=3) |
| self.assertTrue(response is None, |
| 'Recieved flow removed message ') |
| |
| # Verify no entries in the table |
| verify_tablestats(self,expect_active=0) |
| |
| sleep(1) |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |