src/python/oftest/testutils.py

import sys
import copy

try:
    import scapy.all as scapy
except:
    try:
        import scapy as scapy
    except:
        sys.exit("Need to install scapy for packet parsing")

from oftest import config
import oftest.controller as controller
import oftest.cstruct as ofp
import oftest.message as message
import oftest.dataplane as dataplane
import oftest.action as action
import oftest.parse as parse
import logging
import types
import time

global skipped_test_count
skipped_test_count = 0

# Some useful defines
IP_ETHERTYPE = 0x800
TCP_PROTOCOL = 0x6
UDP_PROTOCOL = 0x11

MINSIZE = 0

def delete_all_flows(ctrl):
    """
    Delete all flows on the switch
    @param ctrl The controller object for the test
    """

    logging.info("Deleting all flows")
    msg = message.flow_mod()
    msg.match.wildcards = ofp.OFPFW_ALL
    msg.out_port = ofp.OFPP_NONE
    msg.command = ofp.OFPFC_DELETE
    msg.buffer_id = 0xffffffff
    return ctrl.message_send(msg)

def required_wildcards(parent):
    w = test_param_get('required_wildcards', default='default')
    if w == 'l3-l4':
        return (ofp.OFPFW_NW_SRC_ALL | ofp.OFPFW_NW_DST_ALL | ofp.OFPFW_NW_TOS
                | ofp.OFPFW_NW_PROTO | ofp.OFPFW_TP_SRC | ofp.OFPFW_TP_DST)
    else:
        return 0

def simple_tcp_packet(pktlen=100, 
                      dl_dst='00:01:02:03:04:05',
                      dl_src='00:06:07:08:09:0a',
                      dl_vlan_enable=False,
                      dl_vlan=0,
                      dl_vlan_pcp=0,
                      dl_vlan_cfi=0,
                      ip_src='192.168.0.1',
                      ip_dst='192.168.0.2',
                      ip_tos=0,
                      tcp_sport=1234,
                      tcp_dport=80,
                      ip_ihl=None,
                      ip_options=False
                      ):
    """
    Return a simple dataplane TCP packet

    Supports a few parameters:
    @param len Length of packet in bytes w/o CRC
    @param dl_dst Destinatino MAC
    @param dl_src Source MAC
    @param dl_vlan_enable True if the packet is with vlan, False otherwise
    @param dl_vlan VLAN ID
    @param dl_vlan_pcp VLAN priority
    @param ip_src IP source
    @param ip_dst IP destination
    @param ip_tos IP ToS
    @param tcp_dport TCP destination port
    @param ip_sport TCP source port

    Generates a simple TCP request.  Users
    shouldn't assume anything about this packet other than that
    it is a valid ethernet/IP/TCP frame.
    """

    if MINSIZE > pktlen:
        pktlen = MINSIZE

    # Note Dot1Q.id is really CFI
    if (dl_vlan_enable):
        pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
            scapy.Dot1Q(prio=dl_vlan_pcp, id=dl_vlan_cfi, vlan=dl_vlan)/ \
            scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl)/ \
            scapy.TCP(sport=tcp_sport, dport=tcp_dport)
    else:
        if not ip_options:
            pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
                scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl)/ \
                scapy.TCP(sport=tcp_sport, dport=tcp_dport)
        else:
            pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
                scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl, options=ip_options)/ \
                scapy.TCP(sport=tcp_sport, dport=tcp_dport)

    pkt = pkt/("D" * (pktlen - len(pkt)))

    return pkt

def simple_udp_packet(pktlen=100,
                      dl_dst='00:01:02:03:04:05',
                      dl_src='00:06:07:08:09:0a',
                      dl_vlan_enable=False,
                      dl_vlan=0,
                      dl_vlan_pcp=0,
                      dl_vlan_cfi=0,
                      ip_src='192.168.0.1',
                      ip_dst='192.168.0.2',
                      ip_tos=0,
                      udp_sport=1234,
                      udp_dport=80,
                      ip_ihl=None,
                      ip_options=False
                      ):
    """
    Return a simple dataplane UDP packet

    Supports a few parameters:
    @param len Length of packet in bytes w/o CRC
    @param dl_dst Destination MAC
    @param dl_src Source MAC
    @param dl_vlan_enable True if the packet is with vlan, False otherwise
    @param dl_vlan VLAN ID
    @param dl_vlan_pcp VLAN priority
    @param ip_src IP source
    @param ip_dst IP destination
    @param ip_tos IP ToS
    @param udp_dport UDP destination port
    @param udp_sport UDP source port

    Generates a simple UDP packet. Users shouldn't assume anything about
    this packet other than that it is a valid ethernet/IP/UDP frame.
    """

    if MINSIZE > pktlen:
        pktlen = MINSIZE

    # Note Dot1Q.id is really CFI
    if (dl_vlan_enable):
        pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
            scapy.Dot1Q(prio=dl_vlan_pcp, id=dl_vlan_cfi, vlan=dl_vlan)/ \
            scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl)/ \
            scapy.UDP(sport=udp_sport, dport=udp_dport)
    else:
        if not ip_options:
            pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
                scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl)/ \
                scapy.UDP(sport=udp_sport, dport=udp_dport)
        else:
            pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
                scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl, options=ip_options)/ \
                scapy.UDP(sport=udp_sport, dport=udp_dport)

    pkt = pkt/("D" * (pktlen - len(pkt)))

    return pkt

def simple_icmp_packet(pktlen=60, 
                      dl_dst='00:01:02:03:04:05',
                      dl_src='00:06:07:08:09:0a',
                      dl_vlan_enable=False,
                      dl_vlan=0,
                      dl_vlan_pcp=0,
                      ip_src='192.168.0.1',
                      ip_dst='192.168.0.2',
                      ip_tos=0,
                      icmp_type=8,
                      icmp_code=0
                      ):
    """
    Return a simple ICMP packet

    Supports a few parameters:
    @param len Length of packet in bytes w/o CRC
    @param dl_dst Destinatino MAC
    @param dl_src Source MAC
    @param dl_vlan_enable True if the packet is with vlan, False otherwise
    @param dl_vlan VLAN ID
    @param dl_vlan_pcp VLAN priority
    @param ip_src IP source
    @param ip_dst IP destination
    @param ip_tos IP ToS
    @param icmp_type ICMP type
    @param icmp_code ICMP code

    Generates a simple ICMP ECHO REQUEST.  Users
    shouldn't assume anything about this packet other than that
    it is a valid ethernet/ICMP frame.
    """

    if MINSIZE > pktlen:
        pktlen = MINSIZE

    if (dl_vlan_enable):
        pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
            scapy.Dot1Q(prio=dl_vlan_pcp, id=0, vlan=dl_vlan)/ \
            scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos)/ \
            scapy.ICMP(type=icmp_type, code=icmp_code)
    else:
        pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
            scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos)/ \
            scapy.ICMP(type=icmp_type, code=icmp_code)

    pkt = pkt/("0" * (pktlen - len(pkt)))

    return pkt

def simple_eth_packet(pktlen=60,
                      dl_dst='00:01:02:03:04:05',
                      dl_src='01:80:c2:00:00:00',
                      dl_type=0x88cc):

    if MINSIZE > pktlen:
        pktlen = MINSIZE

    pkt = scapy.Ether(dst=dl_dst, src=dl_src, type=dl_type)

    pkt = pkt/("0" * (pktlen - len(pkt)))

    return pkt

def qinq_tcp_packet(pktlen=100, 
                    dl_dst='00:01:02:03:04:05',
                    dl_src='00:06:07:08:09:0a',
                    dl_vlan_outer=20,
                    dl_vlan_pcp_outer=0,
                    dl_vlan_cfi_outer=0,
                    dl_vlan=10,
                    dl_vlan_pcp=0,
                    dl_vlan_cfi=0,
                    ip_src='192.168.0.1',
                    ip_dst='192.168.0.2',
                    ip_tos=0,
                    tcp_sport=1234,
                    tcp_dport=80,
                    ip_ihl=None,
                    ip_options=False
                    ):
    """
    Return a doubly tagged dataplane TCP packet

    Supports a few parameters:
    @param len Length of packet in bytes w/o CRC
    @param dl_dst Destinatino MAC
    @param dl_src Source MAC
    @param dl_vlan_outer Outer VLAN ID
    @param dl_vlan_pcp_outer Outer VLAN priority
    @param dl_vlan_cfi_outer Outer VLAN cfi bit
    @param dl_vlan Inner VLAN ID
    @param dl_vlan_pcp VLAN priority
    @param dl_vlan_cfi VLAN cfi bit
    @param ip_src IP source
    @param ip_dst IP destination
    @param ip_tos IP ToS
    @param tcp_dport TCP destination port
    @param ip_sport TCP source port

    Generates a TCP request.  Users
    shouldn't assume anything about this packet other than that
    it is a valid ethernet/IP/TCP frame.
    """

    if MINSIZE > pktlen:
        pktlen = MINSIZE

    # Note Dot1Q.id is really CFI
    pkt = scapy.Ether(dst=dl_dst, src=dl_src)/ \
          scapy.Dot1Q(prio=dl_vlan_pcp_outer, id=dl_vlan_cfi_outer, vlan=dl_vlan_outer)/ \
          scapy.Dot1Q(prio=dl_vlan_pcp, id=dl_vlan_cfi, vlan=dl_vlan)/ \
          scapy.IP(src=ip_src, dst=ip_dst, tos=ip_tos, ihl=ip_ihl)/ \
          scapy.TCP(sport=tcp_sport, dport=tcp_dport)

    pkt = pkt/("D" * (pktlen - len(pkt)))

    return pkt

def do_barrier(ctrl, timeout=-1):
    """
    Do a barrier command
    Return 0 on success, -1 on error
    """
    b = message.barrier_request()
    (resp, pkt) = ctrl.transact(b, timeout=timeout)
    # We'll trust the transaction processing in the controller that xid matched
    if not resp:
        return -1
    return 0

def port_config_get(controller, port_no):
    """
    Get a port's configuration

    Gets the switch feature configuration and grabs one port's
    configuration

    @returns (hwaddr, config, advert) The hwaddress, configuration and
    advertised values
    """
    request = message.features_request()
    reply, pkt = controller.transact(request)
    logging.debug(reply.show())
    if reply is None:
        logging.warn("Get feature request failed")
        return None, None, None
    for idx in range(len(reply.ports)):
        if reply.ports[idx].port_no == port_no:
            return (reply.ports[idx].hw_addr, reply.ports[idx].config,
                    reply.ports[idx].advertised)
    
    logging.warn("Did not find port number for port config")
    return None, None, None

def port_config_set(controller, port_no, config, mask):
    """
    Set the port configuration according the given parameters

    Gets the switch feature configuration and updates one port's
    configuration value according to config and mask
    """
    logging.info("Setting port " + str(port_no) + " to config " + str(config))
    request = message.features_request()
    reply, pkt = controller.transact(request)
    if reply is None:
        return -1
    logging.debug(reply.show())
    for idx in range(len(reply.ports)):
        if reply.ports[idx].port_no == port_no:
            break
    if idx >= len(reply.ports):
        return -1
    mod = message.port_mod()
    mod.port_no = port_no
    mod.hw_addr = reply.ports[idx].hw_addr
    mod.config = config
    mod.mask = mask
    mod.advertise = reply.ports[idx].advertised
    rv = controller.message_send(mod)
    return rv

def receive_pkt_check(dp, pkt, yes_ports, no_ports, assert_if):
    """
    Check for proper receive packets across all ports
    @param dp The dataplane object
    @param pkt Expected packet; may be None if yes_ports is empty
    @param yes_ports Set or list of ports that should recieve packet
    @param no_ports Set or list of ports that should not receive packet
    @param assert_if Object that implements assertXXX
    """

    # Wait this long for packets that we don't expect to receive.
    # 100ms is (rarely) too short for positive tests on slow
    # switches but is definitely not too short for a negative test.
    negative_timeout = 0.1

    exp_pkt_arg = None
    if config["relax"]:
        exp_pkt_arg = pkt

    for ofport in yes_ports:
        logging.debug("Checking for pkt on port " + str(ofport))
        (rcv_port, rcv_pkt, pkt_time) = dp.poll(
            port_number=ofport, exp_pkt=exp_pkt_arg)
        assert_if.assertTrue(rcv_pkt is not None, 
                             "Did not receive pkt on " + str(ofport))
        if not dataplane.match_exp_pkt(pkt, rcv_pkt):
            logging.debug("Sent %s" % format_packet(pkt))
            logging.debug("Resp %s" % format_packet(rcv_pkt))
        assert_if.assertTrue(dataplane.match_exp_pkt(pkt, rcv_pkt),
                             "Response packet does not match send packet " +
                             "on port " + str(ofport))
    if len(no_ports) > 0:
        time.sleep(negative_timeout)
    for ofport in no_ports:
        logging.debug("Negative check for pkt on port " + str(ofport))
        (rcv_port, rcv_pkt, pkt_time) = dp.poll(
            port_number=ofport, timeout=0, exp_pkt=exp_pkt_arg)
        assert_if.assertTrue(rcv_pkt is None, 
                             "Unexpected pkt on port " + str(ofport))


def receive_pkt_verify(parent, egr_ports, exp_pkt, ing_port):
    """
    Receive a packet and verify it matches an expected value
    @param egr_port A single port or list of ports

    parent must implement dataplane, assertTrue and assertEqual
    """
    exp_pkt_arg = None
    if config["relax"]:
        exp_pkt_arg = exp_pkt

    if type(egr_ports) == type([]):
        egr_port_list = egr_ports
    else:
        egr_port_list = [egr_ports]

    # Expect a packet from each port on egr port list
    for egr_port in egr_port_list:
        check_port = egr_port
        if egr_port == ofp.OFPP_IN_PORT:
            check_port = ing_port
        (rcv_port, rcv_pkt, pkt_time) = parent.dataplane.poll(
            port_number=check_port, exp_pkt=exp_pkt_arg)

        if rcv_pkt is None:
            logging.error("ERROR: No packet received from " + 
                                str(check_port))

        parent.assertTrue(rcv_pkt is not None,
                          "Did not receive packet port " + str(check_port))
        logging.debug("Packet len " + str(len(rcv_pkt)) + " in on " + 
                            str(rcv_port))

        if str(exp_pkt) != str(rcv_pkt):
            logging.error("ERROR: Packet match failed.")
            logging.debug("Expected len " + str(len(exp_pkt)) + ": "
                                + str(exp_pkt).encode('hex'))
            logging.debug("Received len " + str(len(rcv_pkt)) + ": "
                                + str(rcv_pkt).encode('hex'))
            logging.debug("Expected packet: " + inspect_packet(scapy.Ether(str(exp_pkt))))
            logging.debug("Received packet: " + inspect_packet(scapy.Ether(str(rcv_pkt))))
        parent.assertEqual(str(exp_pkt), str(rcv_pkt),
                           "Packet match error on port " + str(check_port))

def match_verify(parent, req_match, res_match):
    """
    Verify flow matches agree; if they disagree, report where

    parent must implement assertEqual
    Use str() to ensure content is compared and not pointers
    """

    parent.assertEqual(req_match.wildcards, res_match.wildcards,
                       'Match failed: wildcards: ' + hex(req_match.wildcards) +
                       " != " + hex(res_match.wildcards))
    parent.assertEqual(req_match.in_port, res_match.in_port,
                       'Match failed: in_port: ' + str(req_match.in_port) +
                       " != " + str(res_match.in_port))
    parent.assertEqual(str(req_match.dl_src), str(res_match.dl_src),
                       'Match failed: dl_src: ' + str(req_match.dl_src) +
                       " != " + str(res_match.dl_src))
    parent.assertEqual(str(req_match.dl_dst), str(res_match.dl_dst),
                       'Match failed: dl_dst: ' + str(req_match.dl_dst) +
                       " != " + str(res_match.dl_dst))
    parent.assertEqual(req_match.dl_vlan, res_match.dl_vlan,
                       'Match failed: dl_vlan: ' + str(req_match.dl_vlan) +
                       " != " + str(res_match.dl_vlan))
    parent.assertEqual(req_match.dl_vlan_pcp, res_match.dl_vlan_pcp,
                       'Match failed: dl_vlan_pcp: ' + 
                       str(req_match.dl_vlan_pcp) + " != " + 
                       str(res_match.dl_vlan_pcp))
    parent.assertEqual(req_match.dl_type, res_match.dl_type,
                       'Match failed: dl_type: ' + str(req_match.dl_type) +
                       " != " + str(res_match.dl_type))

    if (not(req_match.wildcards & ofp.OFPFW_DL_TYPE)
        and (req_match.dl_type == IP_ETHERTYPE)):
        parent.assertEqual(req_match.nw_tos, res_match.nw_tos,
                           'Match failed: nw_tos: ' + str(req_match.nw_tos) +
                           " != " + str(res_match.nw_tos))
        parent.assertEqual(req_match.nw_proto, res_match.nw_proto,
                           'Match failed: nw_proto: ' + str(req_match.nw_proto) +
                           " != " + str(res_match.nw_proto))
        parent.assertEqual(req_match.nw_src, res_match.nw_src,
                           'Match failed: nw_src: ' + str(req_match.nw_src) +
                           " != " + str(res_match.nw_src))
        parent.assertEqual(req_match.nw_dst, res_match.nw_dst,
                           'Match failed: nw_dst: ' + str(req_match.nw_dst) +
                           " != " + str(res_match.nw_dst))

        if (not(req_match.wildcards & ofp.OFPFW_NW_PROTO)
            and ((req_match.nw_proto == TCP_PROTOCOL)
                 or (req_match.nw_proto == UDP_PROTOCOL))):
            parent.assertEqual(req_match.tp_src, res_match.tp_src,
                               'Match failed: tp_src: ' + 
                               str(req_match.tp_src) +
                               " != " + str(res_match.tp_src))
            parent.assertEqual(req_match.tp_dst, res_match.tp_dst,
                               'Match failed: tp_dst: ' + 
                               str(req_match.tp_dst) +
                               " != " + str(res_match.tp_dst))

def packet_to_flow_match(parent, packet):
    match = parse.packet_to_flow_match(packet)
    match.wildcards |= required_wildcards(parent)
    return match

def flow_msg_create(parent, pkt, ing_port=None, action_list=None, wildcards=None,
               egr_ports=None, egr_queue=None, check_expire=False, in_band=False):
    """
    Create a flow message

    Match on packet with given wildcards.  
    See flow_match_test for other parameter descriptoins
    @param egr_queue if not None, make the output an enqueue action
    @param in_band if True, do not wildcard ingress port
    @param egr_ports None (drop), single port or list of ports
    """
    match = parse.packet_to_flow_match(pkt)
    parent.assertTrue(match is not None, "Flow match from pkt failed")
    if wildcards is None:
        wildcards = required_wildcards(parent)
    if in_band:
        wildcards &= ~ofp.OFPFW_IN_PORT
    match.wildcards = wildcards
    match.in_port = ing_port

    if type(egr_ports) == type([]):
        egr_port_list = egr_ports
    else:
        egr_port_list = [egr_ports]

    request = message.flow_mod()
    request.match = match
    request.buffer_id = 0xffffffff
    if check_expire:
        request.flags |= ofp.OFPFF_SEND_FLOW_REM
        request.hard_timeout = 1

    if action_list is not None:
        for act in action_list:
            logging.debug("Adding action " + act.show())
            rv = request.actions.add(act)
            parent.assertTrue(rv, "Could not add action" + act.show())

    # Set up output/enqueue action if directed
    if egr_queue is not None:
        parent.assertTrue(egr_ports is not None, "Egress port not set")
        act = action.action_enqueue()
        for egr_port in egr_port_list:
            act.port = egr_port
            act.queue_id = egr_queue
            rv = request.actions.add(act)
            parent.assertTrue(rv, "Could not add enqueue action " + 
                              str(egr_port) + " Q: " + str(egr_queue))
    elif egr_ports is not None:
        for egr_port in egr_port_list:
            act = action.action_output()
            act.port = egr_port
            rv = request.actions.add(act)
            parent.assertTrue(rv, "Could not add output action " + 
                              str(egr_port))

    logging.debug(request.show())

    return request

def flow_msg_install(parent, request, clear_table_override=None):
    """
    Install a flow mod message in the switch

    @param parent Must implement controller, assertEqual, assertTrue
    @param request The request, all set to go
    @param clear_table If true, clear the flow table before installing
    """

    clear_table = test_param_get('clear_table', default=True)
    if(clear_table_override != None):
        clear_table = clear_table_override

    if clear_table: 
        logging.debug("Clear flow table")
        rc = delete_all_flows(parent.controller)
        parent.assertEqual(rc, 0, "Failed to delete all flows")

    logging.debug("Insert flow")
    rv = parent.controller.message_send(request)
    parent.assertTrue(rv != -1, "Error installing flow mod")

    parent.assertEqual(do_barrier(parent.controller), 0, "Barrier failed")

def flow_match_test_port_pair(parent, ing_port, egr_ports, wildcards=None,
                              dl_vlan=-1, pkt=None, exp_pkt=None,
                              action_list=None):
    """
    Flow match test on single TCP packet
    @param egr_ports A single port or list of ports

    Run test with packet through switch from ing_port to egr_port
    See flow_match_test for parameter descriptions
    """

    if wildcards is None:
        wildcards = required_wildcards(parent)
    logging.info("Pkt match test: " + str(ing_port) + " to " + 
                       str(egr_ports))
    logging.debug("  WC: " + hex(wildcards) + " vlan: " + str(dl_vlan))
    if pkt is None:
        pkt = simple_tcp_packet(dl_vlan_enable=(dl_vlan >= 0), dl_vlan=dl_vlan)

    request = flow_msg_create(parent, pkt, ing_port=ing_port, 
                              wildcards=wildcards, egr_ports=egr_ports,
                              action_list=action_list)

    flow_msg_install(parent, request)

    logging.debug("Send packet: " + str(ing_port) + " to " + 
                        str(egr_ports))
    parent.dataplane.send(ing_port, str(pkt))

    if exp_pkt is None:
        exp_pkt = pkt
    receive_pkt_verify(parent, egr_ports, exp_pkt, ing_port)

def flow_match_test_pktout(parent, ing_port, egr_ports,
                           dl_vlan=-1, pkt=None, exp_pkt=None,
                           action_list=None):
    """
    Packet-out test on single TCP packet
    @param egr_ports A single port or list of ports

    Run test sending packet-out to egr_ports. The goal is to test the actions
    taken on the packet, not the matching which is of course irrelevant.
    See flow_match_test for parameter descriptions
    """

    if pkt is None:
        pkt = simple_tcp_packet(dl_vlan_enable=(dl_vlan >= 0), dl_vlan=dl_vlan)

    msg = message.packet_out()
    msg.in_port = ing_port
    msg.data = str(pkt)
    if action_list is not None:
        for act in action_list:
            assert(msg.actions.add(act))

    # Set up output action
    if egr_ports is not None:
        for egr_port in egr_ports:
            act = action.action_output()
            act.port = egr_port
            assert(msg.actions.add(act))

    logging.debug(msg.show())
    rv = parent.controller.message_send(msg)
    parent.assertTrue(rv == 0, "Error sending out message")

    if exp_pkt is None:
        exp_pkt = pkt
    receive_pkt_verify(parent, egr_ports, exp_pkt, ing_port)

def get_egr_list(parent, of_ports, how_many, exclude_list=[]):
    """
    Generate a list of ports avoiding those in the exclude list
    @param parent Supplies logging
    @param of_ports List of OF port numbers
    @param how_many Number of ports to be added to the list
    @param exclude_list List of ports not to be used
    @returns An empty list if unable to find enough ports
    """

    if how_many == 0:
        return []

    count = 0
    egr_ports = []
    for egr_idx in range(len(of_ports)): 
        if of_ports[egr_idx] not in exclude_list:
            egr_ports.append(of_ports[egr_idx])
            count += 1
            if count >= how_many:
                return egr_ports
    logging.debug("Could not generate enough egress ports for test")
    return []
    
def flow_match_test(parent, port_map, wildcards=None, dl_vlan=-1, pkt=None, 
                    exp_pkt=None, action_list=None,
                    max_test=0, egr_count=1, ing_port=False):
    """
    Run flow_match_test_port_pair on all port pairs and packet-out

    @param max_test If > 0 no more than this number of tests are executed.
    @param parent Must implement controller, dataplane, assertTrue, assertEqual
    and logging
    @param pkt If not None, use this packet for ingress
    @param wildcards For flow match entry
    @param dl_vlan If not -1, and pkt is None, create a pkt w/ VLAN tag
    @param exp_pkt If not None, use this as the expected output pkt; els use pkt
    @param action_list Additional actions to add to flow mod
    @param egr_count Number of egress ports; -1 means get from config w/ dflt 2
    """
    if wildcards is None:
        wildcards = required_wildcards(parent)
    of_ports = port_map.keys()
    of_ports.sort()
    parent.assertTrue(len(of_ports) > 1, "Not enough ports for test")
    test_count = 0

    if egr_count == -1:
        egr_count = test_param_get('egr_count', default=2)
    
    for ing_idx in range(len(of_ports)):
        ingress_port = of_ports[ing_idx]
        egr_ports = get_egr_list(parent, of_ports, egr_count, 
                                 exclude_list=[ingress_port])
        if ing_port:
            egr_ports.append(ofp.OFPP_IN_PORT)
        if len(egr_ports) == 0:
            parent.assertTrue(0, "Failed to generate egress port list")

        flow_match_test_port_pair(parent, ingress_port, egr_ports, 
                                  wildcards=wildcards, dl_vlan=dl_vlan, 
                                  pkt=pkt, exp_pkt=exp_pkt,
                                  action_list=action_list)
        test_count += 1
        if (max_test > 0) and (test_count > max_test):
            logging.info("Ran " + str(test_count) + " tests; exiting")
            break


    ingress_port = of_ports[0]
    egr_ports = get_egr_list(parent, of_ports, egr_count,
                             exclude_list=[ingress_port])
    if ing_port:
        egr_ports.append(ofp.OFPP_IN_PORT)
    flow_match_test_pktout(parent, ingress_port, egr_ports,
                           dl_vlan=dl_vlan,
                           pkt=pkt, exp_pkt=exp_pkt,
                           action_list=action_list)

def test_param_get(key, default=None):
    """
    Return value passed via test-params if present

    @param key The lookup key
    @param default Default value to use if not found

    If the pair 'key=val' appeared in the string passed to --test-params
    on the command line, return val (as interpreted by exec).  Otherwise
    return default value.

    WARNING: TEST PARAMETERS MUST BE PYTHON IDENTIFIERS; 
    eg egr_count, not egr-count.
    """
    try:
        exec config["test_params"]
    except:
        return default

    s = "val = " + str(key)
    try:
        exec s
        return val
    except:
        return default

def action_generate(parent, field_to_mod, mod_field_vals):
    """
    Create an action to modify the field indicated in field_to_mod

    @param parent Must implement, assertTrue
    @param field_to_mod The field to modify as a string name
    @param mod_field_vals Hash of values to use for modified values
    """

    act = None

    if field_to_mod in ['pktlen']:
        return None

    if field_to_mod == 'dl_dst':
        act = action.action_set_dl_dst()
        act.dl_addr = parse.parse_mac(mod_field_vals['dl_dst'])
    elif field_to_mod == 'dl_src':
        act = action.action_set_dl_src()
        act.dl_addr = parse.parse_mac(mod_field_vals['dl_src'])
    elif field_to_mod == 'dl_vlan_enable':
        if not mod_field_vals['dl_vlan_enable']: # Strip VLAN tag
            act = action.action_strip_vlan()
        # Add VLAN tag is handled by dl_vlan field
        # Will return None in this case
    elif field_to_mod == 'dl_vlan':
        act = action.action_set_vlan_vid()
        act.vlan_vid = mod_field_vals['dl_vlan']
    elif field_to_mod == 'dl_vlan_pcp':
        act = action.action_set_vlan_pcp()
        act.vlan_pcp = mod_field_vals['dl_vlan_pcp']
    elif field_to_mod == 'ip_src':
        act = action.action_set_nw_src()
        act.nw_addr = parse.parse_ip(mod_field_vals['ip_src'])
    elif field_to_mod == 'ip_dst':
        act = action.action_set_nw_dst()
        act.nw_addr = parse.parse_ip(mod_field_vals['ip_dst'])
    elif field_to_mod == 'ip_tos':
        act = action.action_set_nw_tos()
        act.nw_tos = mod_field_vals['ip_tos']
    elif field_to_mod == 'tcp_sport':
        act = action.action_set_tp_src()
        act.tp_port = mod_field_vals['tcp_sport']
    elif field_to_mod == 'tcp_dport':
        act = action.action_set_tp_dst()
        act.tp_port = mod_field_vals['tcp_dport']
    elif field_to_mod == 'udp_sport':
        act = action.action_set_tp_src()
        act.tp_port = mod_field_vals['udp_sport']
    elif field_to_mod == 'udp_dport':
        act = action.action_set_tp_dst()
        act.tp_port = mod_field_vals['udp_dport']
    else:
        parent.assertTrue(0, "Unknown field to modify: " + str(field_to_mod))

    return act

def pkt_action_setup(parent, start_field_vals={}, mod_field_vals={}, 
                     mod_fields=[], tp="tcp", check_test_params=False):
    """
    Set up the ingress and expected packet and action list for a test

    @param parent Must implement assertTrue
    @param start_field_values Field values to use for ingress packet (optional)
    @param mod_field_values Field values to use for modified packet (optional)
    @param mod_fields The list of fields to be modified by the switch in the test.
    @params check_test_params If True, will check the parameters vid, add_vlan
    and strip_vlan from the command line.

    Returns a triple:  pkt-to-send, expected-pkt, action-list
    """

    new_actions = []

    base_pkt_params = {}
    base_pkt_params['pktlen'] = 100
    base_pkt_params['dl_dst'] = '00:DE:F0:12:34:56'
    base_pkt_params['dl_src'] = '00:23:45:67:89:AB'
    base_pkt_params['dl_vlan_enable'] = False
    base_pkt_params['dl_vlan'] = 2
    base_pkt_params['dl_vlan_pcp'] = 0
    base_pkt_params['ip_src'] = '192.168.0.1'
    base_pkt_params['ip_dst'] = '192.168.0.2'
    base_pkt_params['ip_tos'] = 0
    if tp == "tcp":
        base_pkt_params['tcp_sport'] = 1234
        base_pkt_params['tcp_dport'] = 80
    elif tp == "udp":
        base_pkt_params['udp_sport'] = 1234
        base_pkt_params['udp_dport'] = 80
    for keyname in start_field_vals.keys():
        base_pkt_params[keyname] = start_field_vals[keyname]

    mod_pkt_params = {}
    mod_pkt_params['pktlen'] = 100
    mod_pkt_params['dl_dst'] = '00:21:0F:ED:CB:A9'
    mod_pkt_params['dl_src'] = '00:ED:CB:A9:87:65'
    mod_pkt_params['dl_vlan_enable'] = False
    mod_pkt_params['dl_vlan'] = 3
    mod_pkt_params['dl_vlan_pcp'] = 7
    mod_pkt_params['ip_src'] = '10.20.30.40'
    mod_pkt_params['ip_dst'] = '50.60.70.80'
    mod_pkt_params['ip_tos'] = 0xf0
    if tp == "tcp":
        mod_pkt_params['tcp_sport'] = 4321
        mod_pkt_params['tcp_dport'] = 8765
    elif tp == "udp":
        mod_pkt_params['udp_sport'] = 4321
        mod_pkt_params['udp_dport'] = 8765
    for keyname in mod_field_vals.keys():
        mod_pkt_params[keyname] = mod_field_vals[keyname]

    # Check for test param modifications
    strip = False
    if check_test_params:
        add_vlan = test_param_get('add_vlan')
        strip_vlan = test_param_get('strip_vlan')
        vid = test_param_get('vid')

        if add_vlan and strip_vlan:
            parent.assertTrue(0, "Add and strip VLAN both specified")

        if vid:
            base_pkt_params['dl_vlan_enable'] = True
            base_pkt_params['dl_vlan'] = vid
            if 'dl_vlan' in mod_fields:
                mod_pkt_params['dl_vlan'] = vid + 1

        if add_vlan:
            base_pkt_params['dl_vlan_enable'] = False
            mod_pkt_params['dl_vlan_enable'] = True
            mod_pkt_params['pktlen'] = base_pkt_params['pktlen'] + 4
            mod_fields.append('pktlen')
            mod_fields.append('dl_vlan_enable')
            if 'dl_vlan' not in mod_fields:
                mod_fields.append('dl_vlan')
        elif strip_vlan:
            base_pkt_params['dl_vlan_enable'] = True
            mod_pkt_params['dl_vlan_enable'] = False
            mod_pkt_params['pktlen'] = base_pkt_params['pktlen'] - 4
            mod_fields.append('dl_vlan_enable')
            mod_fields.append('pktlen')

    if tp == "tcp":
        packet_builder = simple_tcp_packet
    elif tp == "udp":
        packet_builder = simple_udp_packet
    else:
        raise NotImplementedError("unknown transport protocol %s" % tp)

    # Build the ingress packet
    ingress_pkt = packet_builder(**base_pkt_params)

    # Build the expected packet, modifying the indicated fields
    for item in mod_fields:
        base_pkt_params[item] = mod_pkt_params[item]
        act = action_generate(parent, item, mod_pkt_params)
        if act:
            new_actions.append(act)

    expected_pkt = packet_builder(**base_pkt_params)

    return (ingress_pkt, expected_pkt, new_actions)

# Generate a simple "drop" flow mod
# If in_band is true, then only drop from first test port
def flow_mod_gen(port_map, in_band):
    request = message.flow_mod()
    request.match.wildcards = ofp.OFPFW_ALL
    if in_band:
        request.match.wildcards = ofp.OFPFW_ALL - ofp.OFPFW_IN_PORT
        for of_port, ifname in port_map.items(): # Grab first port
            break
        request.match.in_port = of_port
    request.buffer_id = 0xffffffff
    return request

def skip_message_emit(parent, s):
    """
    Print out a 'skipped' message to stderr

    @param s The string to print out to the log file
    @param parent Must implement config object
    """
    global skipped_test_count

    skipped_test_count += 1
    logging.info("Skipping: " + s)
    if config["dbg_level"] < logging.WARNING:
        sys.stderr.write("(skipped) ")
    else:
        sys.stderr.write("(S)")


def all_stats_get(parent):
    """
    Get the aggregate stats for all flows in the table
    @param parent Test instance with controller connection and assert
    @returns dict with keys flows, packets, bytes, active (flows), 
    lookups, matched
    """
    stat_req = message.aggregate_stats_request()
    stat_req.match = ofp.ofp_match()
    stat_req.match.wildcards = ofp.OFPFW_ALL
    stat_req.table_id = 0xff
    stat_req.out_port = ofp.OFPP_NONE

    rv = {}

    (reply, pkt) = parent.controller.transact(stat_req)
    parent.assertTrue(len(reply.stats) == 1, "Did not receive flow stats reply")

    for obj in reply.stats:
        (rv["flows"], rv["packets"], rv["bytes"]) = (obj.flow_count, 
                                                  obj.packet_count, obj.byte_count)
        break

    request = message.table_stats_request()
    (reply , pkt) = parent.controller.transact(request)

    
    (rv["active"], rv["lookups"], rv["matched"]) = (0,0,0)
    for obj in reply.stats:
        rv["active"] += obj.active_count
        rv["lookups"] += obj.lookup_count
        rv["matched"] += obj.matched_count

    return rv

FILTER=''.join([(len(repr(chr(x)))==3) and chr(x) or '.' 
                for x in range(256)])

def hex_dump_buffer(src, length=16):
    """
    Convert src to a hex dump string and return the string
    @param src The source buffer
    @param length The number of bytes shown in each line
    @returns A string showing the hex dump
    """
    result = ["\n"]
    for i in xrange(0, len(src), length):
       chars = src[i:i+length]
       hex = ' '.join(["%02x" % ord(x) for x in chars])
       printable = ''.join(["%s" % ((ord(x) <= 127 and
                                     FILTER[ord(x)]) or '.') for x in chars])
       result.append("%04x  %-*s  %s\n" % (i, length*3, hex, printable))
    return ''.join(result)

def format_packet(pkt):
    return "Packet length %d \n%s" % (len(str(pkt)), 
                                      hex_dump_buffer(str(pkt)))

def inspect_packet(pkt):
    """
    Wrapper around scapy's show() method.
    @returns A string showing the dissected packet.
    """
    from cStringIO import StringIO
    out = None
    backup = sys.stdout
    try:
        sys.stdout = StringIO()
        pkt.show2()
        out = sys.stdout.getvalue()
        sys.stdout.close()
    finally:
        sys.stdout = backup
    return out

def nonstandard(cls):
    """
    Testcase decorator that marks the test as being non-standard.
    These tests are not automatically added to the "standard" group.
    """
    cls._nonstandard = True
    return cls

def disabled(cls):
    """
    Testcase decorator that marks the test as being disabled.
    These tests are not automatically added to the "standard" group or
    their module's group.
    """
    cls._disabled = True
    return cls