| [GLOBAL] |
| NUM_SDF_FILTERS = 3 |
| ;To config AMBR/MBR values refer meter_profile.cfg. specify only the |
| |
| ;default filter - must be first for now (until DP doesn't install any filters) |
| [SDF_FILTER_0] |
| RATING_GROUP = 9 |
| |
| [SDF_FILTER_1] |
| RATING_GROUP = 5 |
| DIRECTION = bidirectional |
| PRECEDENCE = 255 |
| IPV4_REMOTE = 13.1.0.0 |
| IPV4_REMOTE_MASK = 255.255.0.0 |
| PROTOCOL = 17 |
| REMOTE_LOW_LIMIT_PORT = 5060 |
| REMOTE_HIGH_LIMIT_PORT = 5060 |
| |
| [SDF_FILTER_2] |
| RATING_GROUP = 1 |
| DIRECTION = bidirectional |
| PRECEDENCE = 255 |
| IPV4_REMOTE = 13.1.0.0 |
| IPV4_REMOTE_MASK = 255.255.0.0 |
| PROTOCOL = 17 |
| LOCAL_LOW_LIMIT_PORT = 17000 |
| LOCAL_HIGH_LIMIT_PORT = 17010 |
| |
| [SDF_FILTER_3] |
| RATING_GROUP = 7 |
| DIRECTION = bidirectional |
| PRECEDENCE = 255 |
| IPV4_REMOTE = 13.1.0.0 |
| PROTOCOL = 17 |
| LOCAL_LOW_LIMIT_PORT = 8000 |
| LOCAL_HIGH_LIMIT_PORT = 8080 |