| /********************************************************************************************************* |
| * Software License Agreement (BSD License) * |
| * Author: Sebastien Decugis <sdecugis@freediameter.net> * |
| * * |
| * Copyright (c) 2013, WIDE Project and NICT * |
| * All rights reserved. * |
| * * |
| * Redistribution and use of this software in source and binary forms, with or without modification, are * |
| * permitted provided that the following conditions are met: * |
| * * |
| * * Redistributions of source code must retain the above * |
| * copyright notice, this list of conditions and the * |
| * following disclaimer. * |
| * * |
| * * Redistributions in binary form must reproduce the above * |
| * copyright notice, this list of conditions and the * |
| * following disclaimer in the documentation and/or other * |
| * materials provided with the distribution. * |
| * * |
| * * Neither the name of the WIDE Project or NICT nor the * |
| * names of its contributors may be used to endorse or * |
| * promote products derived from this software without * |
| * specific prior written permission of WIDE Project and * |
| * NICT. * |
| * * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED * |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * |
| * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR * |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * |
| * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * |
| *********************************************************************************************************/ |
| |
| /* RADIUS Accounting-Request messages translation plugin */ |
| |
| #include "rgw_common.h" |
| |
| |
| /* Other constants we use */ |
| #define AI_ACCT 3 /* Diameter Base Accounting application */ |
| #define CC_AC 271 /* ACR/ACA */ |
| #define ACV_ART_START_RECORD 2 /* START_RECORD */ |
| #define ACV_ART_INTERIM_RECORD 3 /* INTERIM_RECORD */ |
| #define ACV_ART_STOP_RECORD 4 /* STOP_RECORD */ |
| #define ACV_ART_AUTHORIZE_AUTHENTICATE 3 /* AUTHORIZE_AUTHENTICATE */ |
| |
| |
| /* The state we keep for this plugin */ |
| struct rgwp_config { |
| struct { |
| struct dict_object * Accounting_Record_Number; /* Accounting-Record-Number */ |
| struct dict_object * Accounting_Record_Type; /* Accounting-Record-Type */ |
| struct dict_object * Acct_Application_Id; /* Acct-Application-Id */ |
| struct dict_object * Acct_Delay_Time; /* Acct-Delay-Time */ |
| struct dict_object * Accounting_Input_Octets; /* Accounting-Input-Octets */ |
| struct dict_object * Accounting_Output_Octets; /* Accounting-Output-Octets */ |
| struct dict_object * Accounting_Input_Packets; /* Accounting-Input-Packets */ |
| struct dict_object * Accounting_Output_Packets; /* Accounting-Output-Packets */ |
| struct dict_object * Acct_Link_Count; /* Acct-Link-Count */ |
| struct dict_object * Acct_Authentic; /* Acct-Authentic */ |
| struct dict_object * Acct_Multi_Session_Id; /* Acct-Multi-Session-Id */ |
| struct dict_object * Acct_Session_Id; /* Acct-Session-Id */ |
| struct dict_object * Acct_Session_Time; /* Acct-Session-Time */ |
| |
| struct dict_object * ARAP_Password; /* ARAP-Password */ |
| struct dict_object * ARAP_Security; /* ARAP-Security */ |
| struct dict_object * ARAP_Security_Data; /* ARAP-Security-Data */ |
| struct dict_object * Auth_Application_Id; /* Auth-Application-Id */ |
| struct dict_object * Auth_Request_Type; /* Auth-Request-Type */ |
| struct dict_object * Authorization_Lifetime; /* Authorization-Lifetime */ |
| struct dict_object * Callback_Number; /* Callback-Number */ |
| struct dict_object * Callback_Id; /* Callback-Id */ |
| struct dict_object * Called_Station_Id; /* Called-Station-Id */ |
| struct dict_object * Calling_Station_Id; /* Calling-Station-Id */ |
| struct dict_object * Class; /* Class */ |
| struct dict_object * CHAP_Algorithm; /* CHAP-Algorithm */ |
| struct dict_object * CHAP_Auth; /* CHAP-Auth */ |
| struct dict_object * CHAP_Challenge; /* CHAP-Challenge */ |
| struct dict_object * CHAP_Ident; /* CHAP-Ident */ |
| struct dict_object * CHAP_Response; /* CHAP-Response */ |
| struct dict_object * Connect_Info; /* Connect-Info */ |
| struct dict_object * Destination_Host; /* Destination-Host */ |
| struct dict_object * Destination_Realm; /* Destination-Realm */ |
| struct dict_object * EAP_Payload; /* EAP-Payload */ |
| struct dict_object * Error_Message; /* Error-Message */ |
| struct dict_object * Error_Reporting_Host; /* Error-Reporting-Host */ |
| struct dict_object * Event_Timestamp; /* Event-Timestamp */ |
| struct dict_object * Failed_AVP; /* Failed-AVP */ |
| struct dict_object * Framed_AppleTalk_Link; /* Framed-AppleTalk-Link */ |
| struct dict_object * Framed_AppleTalk_Network; /* Framed-AppleTalk-Network */ |
| struct dict_object * Framed_AppleTalk_Zone; /* Framed-AppleTalk-Zone */ |
| struct dict_object * Framed_Compression; /* Framed-Compression */ |
| struct dict_object * Framed_IP_Address; /* Framed-IP-Address */ |
| struct dict_object * Framed_IP_Netmask; /* Framed-IP-Netmask */ |
| struct dict_object * Framed_Interface_Id; /* Framed-Interface-Id */ |
| struct dict_object * Framed_IPv6_Prefix; /* Framed-IPv6-Prefix */ |
| struct dict_object * Framed_IPX_Network; /* Framed-IPX-Network */ |
| struct dict_object * Framed_MTU; /* Framed-MTU */ |
| struct dict_object * Framed_Protocol; /* Framed-Protocol */ |
| struct dict_object * Framed_Pool; /* Framed-Pool */ |
| struct dict_object * Framed_IPv6_Route; /* Framed-IPv6-Route */ |
| struct dict_object * Framed_IPv6_Pool; /* Framed-IPv6-Pool */ |
| struct dict_object * Framed_Route; /* Framed-Route */ |
| struct dict_object * Framed_Routing; /* Framed-Routing */ |
| struct dict_object * Filter_Id; /* Filter-Id */ |
| struct dict_object * Idle_Timeout; /* Idle-Timeout */ |
| struct dict_object * Login_IP_Host; /* Login-IP-Host */ |
| struct dict_object * Login_IPv6_Host; /* Login-IPv6-Host */ |
| struct dict_object * Login_LAT_Group; /* Login-LAT-Group */ |
| struct dict_object * Login_LAT_Node; /* Login-LAT-Node */ |
| struct dict_object * Login_LAT_Port; /* Login-LAT-Port */ |
| struct dict_object * Login_LAT_Service; /* Login-LAT-Service */ |
| struct dict_object * Login_Service; /* Login-Service */ |
| struct dict_object * Login_TCP_Port; /* Login-TCP-Port */ |
| struct dict_object * NAS_Identifier; /* NAS-Identifier */ |
| struct dict_object * NAS_IP_Address; /* NAS-IP-Address */ |
| struct dict_object * NAS_IPv6_Address; /* NAS-IPv6-Address */ |
| struct dict_object * NAS_Port; /* NAS-Port */ |
| struct dict_object * NAS_Port_Id; /* NAS-Port-Id */ |
| struct dict_object * NAS_Port_Type; /* NAS-Port-Type */ |
| struct dict_object * Origin_AAA_Protocol; /* Origin-AAA-Protocol */ |
| struct dict_object * Origin_Host; /* Origin-Host */ |
| struct dict_object * Origin_Realm; /* Origin-Realm */ |
| struct dict_object * Originating_Line_Info; /* Originating-Line-Info */ |
| struct dict_object * Port_Limit; /* Port-Limit */ |
| struct dict_object * Re_Auth_Request_Type; /* Re-Auth-Request-Type */ |
| struct dict_object * Result_Code; /* Result-Code */ |
| struct dict_object * Service_Type; /* Service-Type */ |
| struct dict_object * Session_Id; /* Session-Id */ |
| struct dict_object * Session_Timeout; /* Session-Timeout */ |
| struct dict_object * State; /* State */ |
| struct dict_object * Termination_Cause; /* Termination-Cause */ |
| struct dict_object * Tunneling; /* Tunneling */ |
| struct dict_object * Tunnel_Type; /* Tunnel-Type */ |
| struct dict_object * Tunnel_Assignment_Id; /* Tunnel-Assignment-Id */ |
| struct dict_object * Tunnel_Medium_Type; /* Tunnel-Medium-Type */ |
| struct dict_object * Tunnel_Client_Endpoint; /* Tunnel-Client-Endpoint */ |
| struct dict_object * Tunnel_Server_Endpoint; /* Tunnel-Server-Endpoint */ |
| struct dict_object * Tunnel_Private_Group_Id; /* Tunnel-Private-Group-Id */ |
| struct dict_object * Tunnel_Preference; /* Tunnel-Preference */ |
| struct dict_object * Tunnel_Client_Auth_Id; /* Tunnel-Client-Auth-Id */ |
| struct dict_object * Tunnel_Server_Auth_Id; /* Tunnel-Server-Auth-Id */ |
| struct dict_object * User_Name; /* User-Name */ |
| |
| struct dict_object * Session_Termination_Request;/* STR */ |
| } dict; /* cache of the dictionary objects we use */ |
| struct session_handler * sess_hdl; /* We store RADIUS request authenticator information in the session */ |
| char * confstr; |
| |
| int ignore_nai; |
| }; |
| |
| /* The state we store in the session */ |
| struct sess_state { |
| application_id_t auth_appl; /* Auth-Application-Id used for this session, if available (stored in a Class attribute) */ |
| int send_str; /* If not 0, we must send a STR when the ACA is received. */ |
| uint32_t term_cause; /* If not 0, the Termination-Cause to put in the STR. */ |
| }; |
| |
| static DECLARE_FD_DUMP_PROTOTYPE(acct_conf_session_state_dump, struct sess_state * st) |
| { |
| return fd_dump_extend( FD_DUMP_STD_PARAMS, "[rgwx sess_state](@%p): aai:%x str:%d TC:%u", st, st->auth_appl, st->send_str, st->term_cause); |
| } |
| |
| /* Initialize the plugin */ |
| static int acct_conf_parse(char * conffile, struct rgwp_config ** state) |
| { |
| struct rgwp_config * new; |
| struct dict_object * app; |
| |
| TRACE_ENTRY("%p %p", conffile, state); |
| CHECK_PARAMS( state ); |
| |
| CHECK_MALLOC( new = malloc(sizeof(struct rgwp_config)) ); |
| memset(new, 0, sizeof(struct rgwp_config)); |
| |
| CHECK_FCT( fd_sess_handler_create( &new->sess_hdl, (void *)free, acct_conf_session_state_dump, NULL ) ); |
| new->confstr = conffile; |
| |
| if (conffile && strstr(conffile, "nonai")) |
| new->ignore_nai = 1; |
| |
| /* Resolve all dictionary objects we use */ |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Record-Number", &new->dict.Accounting_Record_Number, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Record-Type", &new->dict.Accounting_Record_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Application-Id", &new->dict.Acct_Application_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Delay-Time", &new->dict.Acct_Delay_Time, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Input-Octets", &new->dict.Accounting_Input_Octets, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Output-Octets", &new->dict.Accounting_Output_Octets, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Input-Packets", &new->dict.Accounting_Input_Packets, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Accounting-Output-Packets", &new->dict.Accounting_Output_Packets, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Authentic", &new->dict.Acct_Authentic, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Link-Count", &new->dict.Acct_Link_Count, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Multi-Session-Id", &new->dict.Acct_Multi_Session_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Session-Id", &new->dict.Acct_Session_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Acct-Session-Time", &new->dict.Acct_Session_Time, ENOENT) ); |
| |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Password", &new->dict.ARAP_Password, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Security", &new->dict.ARAP_Security, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Security-Data", &new->dict.ARAP_Security_Data, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Auth-Application-Id", &new->dict.Auth_Application_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Auth-Request-Type", &new->dict.Auth_Request_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Authorization-Lifetime", &new->dict.Authorization_Lifetime, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Callback-Number", &new->dict.Callback_Number, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Callback-Id", &new->dict.Callback_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Called-Station-Id", &new->dict.Called_Station_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Calling-Station-Id", &new->dict.Calling_Station_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Class", &new->dict.Class, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Connect-Info", &new->dict.Connect_Info, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Destination-Host", &new->dict.Destination_Host, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Destination-Realm", &new->dict.Destination_Realm, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "EAP-Payload", &new->dict.EAP_Payload, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Error-Message", &new->dict.Error_Message, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Error-Reporting-Host", &new->dict.Error_Reporting_Host, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Event-Timestamp", &new->dict.Event_Timestamp, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Failed-AVP", &new->dict.Failed_AVP, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-AppleTalk-Link", &new->dict.Framed_AppleTalk_Link, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-AppleTalk-Network", &new->dict.Framed_AppleTalk_Network, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-AppleTalk-Zone", &new->dict.Framed_AppleTalk_Zone, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Compression", &new->dict.Framed_Compression, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IP-Address", &new->dict.Framed_IP_Address, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IP-Netmask", &new->dict.Framed_IP_Netmask, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Interface-Id", &new->dict.Framed_Interface_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IPv6-Prefix", &new->dict.Framed_IPv6_Prefix, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IPX-Network", &new->dict.Framed_IPX_Network, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-MTU", &new->dict.Framed_MTU, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Protocol", &new->dict.Framed_Protocol, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Pool", &new->dict.Framed_Pool, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Route", &new->dict.Framed_Route, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IPv6-Route", &new->dict.Framed_IPv6_Route, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IPv6-Pool", &new->dict.Framed_IPv6_Pool, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Routing", &new->dict.Framed_Routing, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Filter-Id", &new->dict.Filter_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Idle-Timeout", &new->dict.Idle_Timeout, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-IP-Host", &new->dict.Login_IP_Host, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-IPv6-Host", &new->dict.Login_IPv6_Host, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Group", &new->dict.Login_LAT_Group, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Node", &new->dict.Login_LAT_Node, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Port", &new->dict.Login_LAT_Port, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Service", &new->dict.Login_LAT_Service, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-Service", &new->dict.Login_Service, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-TCP-Port", &new->dict.Login_TCP_Port, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Identifier", &new->dict.NAS_Identifier, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-IP-Address", &new->dict.NAS_IP_Address, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-IPv6-Address", &new->dict.NAS_IPv6_Address, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port", &new->dict.NAS_Port, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port-Id", &new->dict.NAS_Port_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port-Type", &new->dict.NAS_Port_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-AAA-Protocol", &new->dict.Origin_AAA_Protocol, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-Host", &new->dict.Origin_Host, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-Realm", &new->dict.Origin_Realm, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Originating-Line-Info", &new->dict.Originating_Line_Info, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Port-Limit", &new->dict.Port_Limit, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Re-Auth-Request-Type", &new->dict.Re_Auth_Request_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Result-Code", &new->dict.Result_Code, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Service-Type", &new->dict.Service_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Session-Id", &new->dict.Session_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Session-Timeout", &new->dict.Session_Timeout, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "State", &new->dict.State, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Termination-Cause", &new->dict.Termination_Cause, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunneling", &new->dict.Tunneling, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Assignment-Id", &new->dict.Tunnel_Assignment_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Type", &new->dict.Tunnel_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Medium-Type", &new->dict.Tunnel_Medium_Type, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Client-Endpoint", &new->dict.Tunnel_Client_Endpoint, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Server-Endpoint", &new->dict.Tunnel_Server_Endpoint, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Private-Group-Id", &new->dict.Tunnel_Private_Group_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Preference", &new->dict.Tunnel_Preference, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Client-Auth-Id", &new->dict.Tunnel_Client_Auth_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Server-Auth-Id", &new->dict.Tunnel_Server_Auth_Id, ENOENT) ); |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "User-Name", &new->dict.User_Name, ENOENT) ); |
| |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_COMMAND, CMD_BY_NAME, "Session-Termination-Request", &new->dict.Session_Termination_Request, ENOENT) ); |
| |
| /* This plugin provides the following Diameter authentication applications support: */ |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_APPLICATION, APPLICATION_BY_NAME, "Diameter Base Accounting", &app, ENOENT) ); |
| CHECK_FCT( fd_disp_app_support ( app, NULL, 0, 1 ) ); |
| |
| *state = new; |
| return 0; |
| } |
| |
| /* deinitialize */ |
| static void acct_conf_free(struct rgwp_config * state) |
| { |
| TRACE_ENTRY("%p", state); |
| CHECK_PARAMS_DO( state, return ); |
| CHECK_FCT_DO( fd_sess_handler_destroy( &state->sess_hdl, NULL ), ); |
| free(state); |
| return; |
| } |
| |
| /* Incoming RADIUS request */ |
| static int acct_rad_req( struct rgwp_config * cs, struct radius_msg * rad_req, struct radius_msg ** rad_ans, struct msg ** diam_fw, struct rgw_client * cli ) |
| { |
| int idx; |
| int send_str=0; |
| uint32_t str_cause=0; |
| uint32_t e2eid = 0; |
| application_id_t auth_appl=0; |
| int got_id = 0; |
| uint32_t status_type; |
| uint32_t termination_action = 0; |
| uint32_t gigawords_in=0, gigawords_out=0; |
| size_t nattr_used = 0; |
| union avp_value value; |
| struct avp ** avp_tun = NULL, *avp = NULL; |
| struct session * sess; |
| |
| const char * prefix = "Diameter/"; |
| size_t pref_len; |
| os0_t si = NULL; |
| size_t si_len = 0; |
| os0_t un = NULL; |
| size_t un_len = 0; |
| |
| TRACE_ENTRY("%p %p %p %p %p", cs, rad_req, rad_ans, diam_fw, cli); |
| CHECK_PARAMS(rad_req && (rad_req->hdr->code == RADIUS_CODE_ACCOUNTING_REQUEST) && rad_ans && diam_fw && *diam_fw); |
| |
| pref_len = strlen(prefix); |
| |
| /* |
| Either NAS-IP-Address or NAS-Identifier MUST be present in a |
| RADIUS Accounting-Request. It SHOULD contain a NAS-Port or NAS- |
| Port-Type attribute or both unless the service does not involve a |
| port or the NAS does not distinguish among its ports. |
| */ |
| /* We also enforce that the message contains a CLASS attribute with Diameter/ prefix containing the Session-Id. */ |
| for (idx = 0; idx < rad_req->attr_used; idx++) { |
| struct radius_attr_hdr * attr = (struct radius_attr_hdr *)(rad_req->buf + rad_req->attr_pos[idx]); |
| uint8_t * v = (uint8_t *)(attr + 1); |
| size_t attr_len = attr->length - sizeof(struct radius_attr_hdr); |
| |
| switch (attr->type) { |
| case RADIUS_ATTR_NAS_IP_ADDRESS: |
| case RADIUS_ATTR_NAS_IDENTIFIER: |
| case RADIUS_ATTR_NAS_IPV6_ADDRESS: |
| got_id = 1; |
| break; |
| |
| case RADIUS_ATTR_TERMINATION_ACTION: |
| CHECK_PARAMS( attr->length == 6 ); |
| termination_action = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| break; |
| |
| case RADIUS_ATTR_ACCT_INPUT_GIGAWORDS: |
| CHECK_PARAMS( attr->length == 6 ); |
| gigawords_in = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| break; |
| |
| case RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS: |
| CHECK_PARAMS( attr->length == 6 ); |
| gigawords_out = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| break; |
| |
| case RADIUS_ATTR_CLASS: |
| if ((attr_len > pref_len ) && ! strncmp((char *)v, prefix, pref_len)) { |
| int i; |
| si = v + pref_len; |
| si_len = attr_len - pref_len; |
| TRACE_DEBUG(ANNOYING, "Found Class attribute with '%s' prefix (attr #%d), SI:'%.*s'.", prefix, idx, (int)si_len, si); |
| /* Remove from the message */ |
| for (i = idx + 1; i < rad_req->attr_used; i++) |
| rad_req->attr_pos[i - 1] = rad_req->attr_pos[i]; |
| rad_req->attr_used -= 1; |
| } |
| break; |
| |
| case RADIUS_ATTR_USER_NAME: |
| if (attr_len) { |
| un = v; |
| un_len = attr_len; |
| TRACE_DEBUG(ANNOYING, "Found a User-Name attribute: '%.*s'", (int)un_len, un); |
| } |
| break; |
| |
| } |
| } |
| |
| /* Check basic information is there */ |
| if (!got_id || radius_msg_get_attr_int32(rad_req, RADIUS_ATTR_ACCT_STATUS_TYPE, &status_type)) { |
| TRACE_DEBUG(INFO, "[acct.rgwx] RADIUS Account-Request from %s did not contain a NAS ip/identifier or Acct-Status-Type attribute, reject.", rgw_clients_id(cli)); |
| return EINVAL; |
| } |
| |
| /* |
| -- RFC2866: |
| In Accounting-Request Packets, the Authenticator value is a 16 |
| octet MD5 [5] checksum, called the Request Authenticator. |
| |
| The NAS and RADIUS accounting server share a secret. The Request |
| Authenticator field in Accounting-Request packets contains a one- |
| way MD5 hash calculated over a stream of octets consisting of the |
| Code + Identifier + Length + 16 zero octets + request attributes + |
| shared secret (where + indicates concatenation). The 16 octet MD5 |
| hash value is stored in the Authenticator field of the |
| Accounting-Request packet. |
| |
| Note that the Request Authenticator of an Accounting-Request can |
| not be done the same way as the Request Authenticator of a RADIUS |
| Access-Request, because there is no User-Password attribute in an |
| Accounting-Request. |
| |
| |
| -- RFC5080: |
| The Request Authenticator field MUST contain the correct data, as |
| given by the above calculation. Invalid packets are silently |
| discarded. Note that some early implementations always set the |
| Request Authenticator to all zeros. New implementations of RADIUS |
| clients MUST use the above algorithm to calculate the Request |
| Authenticator field. New RADIUS server implementations MUST |
| silently discard invalid packets. |
| |
| */ |
| { |
| uint8_t save[MD5_MAC_LEN]; |
| uint8_t * secret; |
| size_t secret_len; |
| |
| /* Get the shared secret */ |
| CHECK_FCT(rgw_clients_getkey(cli, &secret, &secret_len)); |
| |
| /* Copy the received Request Authenticator */ |
| memcpy(&save[0], &rad_req->hdr->authenticator[0], MD5_MAC_LEN); |
| |
| /* Compute the same authenticator */ |
| radius_msg_finish_acct(rad_req, secret, secret_len); |
| |
| /* And now compare with the received value */ |
| if (memcmp(&save[0], &rad_req->hdr->authenticator[0], MD5_MAC_LEN)) { |
| /* Invalid authenticator */ |
| TRACE_BUFFER(FD_LOG_DEBUG, FULL+1, "Received ReqAuth: ", &save[0], MD5_MAC_LEN, "" ); |
| TRACE_BUFFER(FD_LOG_DEBUG, FULL+1, "Expected ReqAuth: ", &rad_req->hdr->authenticator[0], MD5_MAC_LEN, "" ); |
| TRACE_DEBUG(INFO, "[acct.rgwx] Invalid Request Authenticator in Account-Request from %s, discarding the message.", rgw_clients_id(cli)); |
| return EINVAL; |
| } |
| } |
| |
| |
| /* Handle the Accounting-On case: nothing to do, just reply OK */ |
| if (status_type == RADIUS_ACCT_STATUS_TYPE_ACCOUNTING_ON) { |
| TRACE_DEBUG(FULL, "[acct.rgwx] Received Accounting-On Acct-Status-Type attribute, replying without translation to Diameter."); |
| CHECK_MALLOC( *rad_ans = radius_msg_new(RADIUS_CODE_ACCOUNTING_RESPONSE, rad_req->hdr->identifier) ); |
| return -2; |
| } |
| |
| if (status_type == RADIUS_ACCT_STATUS_TYPE_ACCOUNTING_OFF) { |
| TRACE_DEBUG(FULL, "[acct.rgwx] Received Accounting-Off Acct-Status-Type attribute, we must terminate all active sessions."); |
| TODO("RADIUS side is rebooting, send STR on all sessions???"); |
| return ENOTSUP; |
| } |
| |
| /* Check if we got a valid session information, otherwise the server will not be able to handle the data... */ |
| if (!si) { |
| TRACE_DEBUG(INFO, "[acct.rgwx] RADIUS Account-Request from %s did not contain a CLASS attribute with Diameter session information, reject.", rgw_clients_id(cli)); |
| return EINVAL; |
| } |
| |
| /* Add the Destination-Realm */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Destination_Realm, 0, &avp ) ); |
| idx = 0; |
| if (un && ! cs->ignore_nai) { |
| /* Is there an '@' in the user name? We don't care for decorated NAI here */ |
| for (idx = un_len - 2; idx > 0; idx--) { |
| if (un[idx] == '@') { |
| idx++; |
| break; |
| } |
| } |
| } |
| if (idx == 0) { |
| /* Not found in the User-Name => we use the local domain of this gateway */ |
| value.os.data = (uint8_t *)fd_g_config->cnf_diamrlm; |
| value.os.len = fd_g_config->cnf_diamrlm_len; |
| } else { |
| value.os.data = un + idx; |
| value.os.len = un_len - idx; |
| } |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_FIRST_CHILD, avp) ); |
| |
| /* Create the Session-Id AVP */ |
| { |
| CHECK_FCT( fd_sess_fromsid_msg ( si, si_len, &sess, NULL) ); |
| |
| TRACE_DEBUG(FULL, "[acct.rgwx] Translating new accounting message for session '%.*s'...", (int)si_len, si); |
| |
| /* Add the Session-Id AVP as first AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Session_Id, 0, &avp ) ); |
| value.os.data = (unsigned char *)si; |
| value.os.len = si_len; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_FIRST_CHILD, avp) ); |
| CHECK_FCT( fd_msg_sess_set(*diam_fw, sess) ); |
| } |
| |
| |
| /* Add the command code */ |
| { |
| struct msg_hdr * header = NULL; |
| CHECK_FCT( fd_msg_hdr ( *diam_fw, &header ) ); |
| header->msg_flags = CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE; |
| header->msg_code = CC_AC; |
| header->msg_appl = AI_ACCT; |
| |
| /* Add the Acct-Application-Id */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Acct_Application_Id, 0, &avp ) ); |
| value.i32 = header->msg_appl; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* save the end to end id */ |
| e2eid = header->msg_eteid; |
| } |
| |
| /* Convert the RADIUS attributes, as they appear in the message */ |
| for (idx = 0; idx < rad_req->attr_used; idx++) { |
| struct radius_attr_hdr * attr = (struct radius_attr_hdr *)(rad_req->buf + rad_req->attr_pos[idx]); |
| |
| switch (attr->type) { |
| /* |
| Any attribute valid in a RADIUS Access-Request or Access-Accept |
| packet is valid in a RADIUS Accounting-Request packet, except that |
| the following attributes MUST NOT be present in an Accounting- |
| Request: User-Password, CHAP-Password, Reply-Message, State. |
| */ |
| case RADIUS_ATTR_USER_PASSWORD: |
| case RADIUS_ATTR_CHAP_PASSWORD: |
| case RADIUS_ATTR_REPLY_MESSAGE: |
| case RADIUS_ATTR_STATE: |
| case RADIUS_ATTR_MESSAGE_AUTHENTICATOR: |
| case RADIUS_ATTR_EAP_MESSAGE: |
| TRACE_DEBUG(INFO, "[acct.rgwx] RADIUS Account-Request contains a forbidden attribute (%hhd), reject.", attr->type); |
| return EINVAL; |
| |
| |
| /* This macro converts a RADIUS attribute to a Diameter AVP of type OctetString */ |
| #define CONV2DIAM_STR( _dictobj_ ) \ |
| CHECK_PARAMS( attr->length >= 2 ); \ |
| /* Create the AVP with the specified dictionary model */ \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| value.os.len = attr->length - 2; \ |
| value.os.data = (unsigned char *)(attr + 1); \ |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| /* Add the AVP in the Diameter message. */ \ |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| |
| /* Same thing, for scalar AVPs of 32 bits */ |
| #define CONV2DIAM_32B( _dictobj_ ) \ |
| CHECK_PARAMS( attr->length == 6 ); \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| { \ |
| uint8_t * v = (uint8_t *)(attr + 1); \ |
| value.u32 = (v[0] << 24) \ |
| | (v[1] << 16) \ |
| | (v[2] << 8) \ |
| | v[3] ; \ |
| } \ |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| |
| /* And the 64b version */ |
| #define CONV2DIAM_64B( _dictobj_ ) \ |
| CHECK_PARAMS( attr->length == 10); \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| { \ |
| uint8_t * v = (uint8_t *)(attr + 1); \ |
| value.u64 = ((uint64_t)(v[0]) << 56) \ |
| | ((uint64_t)(v[1]) << 48) \ |
| | ((uint64_t)(v[2]) << 40) \ |
| | ((uint64_t)(v[3]) << 32) \ |
| | ((uint64_t)(v[4]) << 24) \ |
| | ((uint64_t)(v[5]) << 16) \ |
| | ((uint64_t)(v[6]) << 8) \ |
| | (uint64_t)(v[7]) ; \ |
| } \ |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| |
| |
| /* Attributes as listed in RFC2866, section 5.13 and RFC4005, section 10.2.1 */ |
| case RADIUS_ATTR_USER_NAME: |
| CONV2DIAM_STR( User_Name ); |
| break; |
| |
| case RADIUS_ATTR_NAS_IP_ADDRESS: |
| CONV2DIAM_STR( NAS_IP_Address ); |
| break; |
| |
| case RADIUS_ATTR_NAS_PORT: |
| CONV2DIAM_32B( NAS_Port ); |
| break; |
| |
| case RADIUS_ATTR_SERVICE_TYPE: |
| CONV2DIAM_32B( Service_Type ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_PROTOCOL: |
| CONV2DIAM_32B( Framed_Protocol ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IP_ADDRESS: |
| CONV2DIAM_STR( Framed_IP_Address ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IP_NETMASK: |
| CONV2DIAM_STR( Framed_IP_Netmask ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_ROUTING: |
| CONV2DIAM_32B( Framed_Routing ); |
| break; |
| |
| case RADIUS_ATTR_FILTER_ID: |
| CONV2DIAM_STR( Filter_Id ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_MTU: |
| CONV2DIAM_32B( Framed_MTU ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_COMPRESSION: |
| CONV2DIAM_32B( Framed_Compression ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_IP_HOST: |
| CONV2DIAM_STR( Login_IP_Host ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_SERVICE: |
| CONV2DIAM_32B( Login_Service ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_TCP_PORT: |
| CONV2DIAM_32B( Login_TCP_Port ); |
| break; |
| |
| case RADIUS_ATTR_CALLBACK_NUMBER: |
| CONV2DIAM_STR( Callback_Number ); |
| break; |
| |
| case RADIUS_ATTR_CALLBACK_ID: |
| CONV2DIAM_STR( Callback_Id ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_ROUTE: |
| CONV2DIAM_STR( Framed_Route ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IPX_NETWORK: |
| CONV2DIAM_32B( Framed_IPX_Network ); |
| break; |
| |
| case RADIUS_ATTR_CLASS: |
| CONV2DIAM_STR( Class ); |
| /* In addition, save the data in the session if it is "our" CLASS_AAI_PREFIX Class attribute */ |
| { |
| char buf[32]; |
| char * attr_val, *auth_val; |
| attr_val = (char *)(attr + 1); |
| auth_val = attr_val + CONSTSTRLEN(CLASS_AAI_PREFIX); |
| if ( (attr->length > sizeof(struct radius_attr_hdr) + CONSTSTRLEN(CLASS_AAI_PREFIX) ) |
| && (attr->length < sizeof(struct radius_attr_hdr) + CONSTSTRLEN(CLASS_AAI_PREFIX) + sizeof(buf)) |
| && ! strncmp(attr_val, CLASS_AAI_PREFIX, CONSTSTRLEN(CLASS_AAI_PREFIX))) { |
| |
| memset(buf, 0, sizeof(buf)); |
| memcpy(buf, auth_val, attr->length - sizeof(struct radius_attr_hdr) - CONSTSTRLEN(CLASS_AAI_PREFIX)); |
| if (sscanf(buf, "%u", &auth_appl) == 1) { |
| TRACE_DEBUG(ANNOYING, "Found Class attribute with '%s' prefix (attr #%d), AAI:%u.", CLASS_AAI_PREFIX, idx, auth_appl); |
| } |
| } |
| } |
| break; |
| |
| case RADIUS_ATTR_VENDOR_SPECIFIC: |
| if (attr->length >= 6) { |
| uint32_t vendor_id; |
| uint8_t * c = (uint8_t *)(attr + 1); |
| |
| vendor_id = c[0] << 24 | c[1] << 16 | c[2] << 8 | c[3]; |
| c += 4; |
| |
| switch (vendor_id) { |
| |
| /* For the vendors we KNOW they follow the VSA recommended format, we convert following the rules of RFC4005 (9.6.2) */ |
| case RADIUS_VENDOR_ID_MICROSOFT : /* RFC 2548 */ |
| /* other vendors ? */ |
| { |
| size_t left; |
| struct radius_attr_vendor *vtlv; |
| |
| left = attr->length - 6; |
| vtlv = (struct radius_attr_vendor *)c; |
| |
| while ((left >= 2) && (vtlv->vendor_length <= left)) { |
| /* Search our dictionary for corresponding Vendor's AVP */ |
| struct dict_avp_request req; |
| struct dict_object * avp_model = NULL; |
| memset(&req, 0, sizeof(struct dict_avp_request)); |
| req.avp_vendor = vendor_id; |
| req.avp_code = vtlv->vendor_type; |
| |
| CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_CODE_AND_VENDOR, &req, &avp_model, 0) ); |
| if (!avp_model) { |
| TRACE_DEBUG(FULL, "Unknown attribute (vendor 0x%x, code 0x%x) ignored.", req.avp_vendor, req.avp_code); |
| } else { |
| CHECK_FCT( fd_msg_avp_new ( avp_model, 0, &avp ) ); |
| value.os.len = vtlv->vendor_length - 2; |
| value.os.data = (unsigned char *)(vtlv + 1); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| } |
| c += vtlv->vendor_length; |
| left -= vtlv->vendor_length; |
| vtlv = (struct radius_attr_vendor *)c; |
| } |
| } |
| break; |
| |
| /* Other vendors we KNOw how to convert the attributes would be added here... */ |
| /* case RADIUS_VENDOR_ID_CISCO : |
| break; */ |
| /* case RADIUS_VENDOR_ID_IETF : (extended RADIUS attributes) |
| break; */ |
| |
| /* When we don't know, just discard the attribute... VSA are optional with regards to RADIUS anyway */ |
| default: |
| /* do nothing */ |
| TRACE_DEBUG(FULL, "VSA attribute from vendor %d discarded", vendor_id); |
| |
| } |
| } |
| break; |
| |
| case RADIUS_ATTR_SESSION_TIMEOUT: |
| /* Translation depends on Termination-Action : rfc4005#section-9.2.1 */ |
| if (termination_action != RADIUS_TERMINATION_ACTION_RADIUS_REQUEST) { |
| CONV2DIAM_32B( Session_Timeout ); |
| } else { |
| CONV2DIAM_32B( Authorization_Lifetime ); |
| /* And add this additional AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Re_Auth_Request_Type, 0, &avp ) ); |
| value.u32 = ACV_ART_AUTHORIZE_AUTHENTICATE; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| } |
| break; |
| |
| case RADIUS_ATTR_IDLE_TIMEOUT: |
| CONV2DIAM_32B( Idle_Timeout ); |
| break; |
| |
| case RADIUS_ATTR_TERMINATION_ACTION: |
| /* Just remove */ |
| break; |
| |
| case RADIUS_ATTR_CALLED_STATION_ID: |
| CONV2DIAM_STR( Called_Station_Id ); |
| break; |
| |
| case RADIUS_ATTR_CALLING_STATION_ID: |
| CONV2DIAM_STR( Calling_Station_Id ); |
| break; |
| |
| case RADIUS_ATTR_NAS_IDENTIFIER: |
| CONV2DIAM_STR( NAS_Identifier ); |
| break; |
| |
| /* Proxy-State is handled by echo_drop.rgwx plugin, we ignore it here */ |
| |
| case RADIUS_ATTR_LOGIN_LAT_SERVICE: |
| CONV2DIAM_STR( Login_LAT_Service ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_LAT_NODE: |
| CONV2DIAM_STR( Login_LAT_Node ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_LAT_GROUP: |
| CONV2DIAM_STR( Login_LAT_Group ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_APPLETALK_LINK: |
| CONV2DIAM_32B( Framed_AppleTalk_Link ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_APPLETALK_NETWORK: |
| CONV2DIAM_32B( Framed_AppleTalk_Network ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_APPLETALK_ZONE: |
| CONV2DIAM_STR( Framed_AppleTalk_Zone ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_STATUS_TYPE: |
| /* |
| - If the RADIUS message received is an Accounting-Request, the |
| Acct-Status-Type attribute value must be converted to a |
| Accounting-Record-Type AVP value. If the Acct-Status-Type |
| attribute value is STOP, the local server MUST issue a |
| Session-Termination-Request message once the Diameter |
| Accounting-Answer message has been received. |
| */ |
| switch (status_type) { |
| case RADIUS_ACCT_STATUS_TYPE_START: |
| value.u32 = ACV_ART_START_RECORD; |
| break; |
| case RADIUS_ACCT_STATUS_TYPE_STOP: |
| value.u32 = ACV_ART_STOP_RECORD; |
| send_str = 1; /* Register this info in the session */ |
| break; |
| case RADIUS_ACCT_STATUS_TYPE_INTERIM_UPDATE: |
| value.u32 = ACV_ART_INTERIM_RECORD; |
| break; |
| default: |
| TRACE_DEBUG(INFO, "Unknown RADIUS_ATTR_ACCT_STATUS_TYPE value %d, aborting...", status_type); |
| return ENOTSUP; |
| } |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Record_Type, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* While here, we also add the Accouting-Record-Number AVP. |
| The Accounting-Record-Number AVP (AVP Code 485) is of type Unsigned32 |
| and identifies this record within one session. As Session-Id AVPs |
| are globally unique, the combination of Session-Id and Accounting- |
| Record-Number AVPs is also globally unique, and can be used in |
| matching accounting records with confirmations. An easy way to |
| produce unique numbers is to set the value to 0 for records of type |
| EVENT_RECORD and START_RECORD, and set the value to 1 for the first |
| INTERIM_RECORD, 2 for the second, and so on until the value for |
| STOP_RECORD is one more than for the last INTERIM_RECORD. |
| |
| -- we actually use the end-to-end id of the message here, which remains constant |
| if we send a duplicate, so it has the same properties as the suggested algorithm. |
| Anyway, it assumes that we are not converting twice the same RADIUS message. |
| . */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Record_Number, 0, &avp ) ); |
| value.u32 = e2eid; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| |
| break; |
| |
| case RADIUS_ATTR_ACCT_DELAY_TIME: |
| CONV2DIAM_32B( Acct_Delay_Time ); |
| break; |
| |
| /* |
| - If the RADIUS message contains the Accounting-Input-Octets, |
| Accounting-Input-Packets, Accounting-Output-Octets, or |
| Accounting-Output-Packets, these attributes must be converted |
| to the Diameter equivalents. Further, if the Acct-Input- |
| Gigawords or Acct-Output-Gigawords attributes are present, |
| these must be used to properly compute the Diameter accounting |
| AVPs. |
| */ |
| case RADIUS_ATTR_ACCT_INPUT_OCTETS: |
| memset(&value, 0, sizeof(value)); |
| { |
| uint8_t * v = (uint8_t *)(attr + 1); |
| value.u64 = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| } |
| value.u64 += ((uint64_t)gigawords_in << 32); |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Input_Octets, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_OUTPUT_OCTETS: |
| memset(&value, 0, sizeof(value)); |
| { |
| uint8_t * v = (uint8_t *)(attr + 1); |
| value.u64 = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| } |
| value.u64 += ((uint64_t)gigawords_out << 32); |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Output_Octets, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_SESSION_ID: |
| CONV2DIAM_STR( Acct_Session_Id ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_AUTHENTIC: |
| CONV2DIAM_32B( Acct_Authentic ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_SESSION_TIME: |
| CONV2DIAM_32B( Acct_Session_Time ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_INPUT_PACKETS: |
| memset(&value, 0, sizeof(value)); |
| { |
| uint8_t * v = (uint8_t *)(attr + 1); |
| value.u64 = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| } |
| /* value.u64 += (gigawords_in << 32); */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Input_Packets, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_OUTPUT_PACKETS: |
| memset(&value, 0, sizeof(value)); |
| { |
| uint8_t * v = (uint8_t *)(attr + 1); |
| value.u64 = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| } |
| /* value.u64 += (gigawords_out << 32); */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Accounting_Output_Packets, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| break; |
| |
| /* |
| - If the Accounting message contains an Acct-Termination-Cause |
| attribute, it should be translated to the equivalent |
| Termination-Cause AVP value. |
| */ |
| case RADIUS_ATTR_ACCT_TERMINATE_CAUSE: |
| /* rfc4005#section-9.3.5 */ |
| { |
| uint8_t * v = (uint8_t *)(attr + 1); |
| str_cause = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| } |
| str_cause += 10; /* This seems to be the rule, we can modify later if needed */ |
| break; |
| |
| case RADIUS_ATTR_ACCT_MULTI_SESSION_ID: |
| CONV2DIAM_STR( Acct_Multi_Session_Id ); |
| break; |
| |
| case RADIUS_ATTR_ACCT_LINK_COUNT: |
| CONV2DIAM_32B( Acct_Link_Count ); |
| break; |
| |
| /* CHAP-Challenge is not present in Accounting-Request */ |
| |
| case RADIUS_ATTR_NAS_PORT_TYPE: |
| CONV2DIAM_32B( NAS_Port_Type ); |
| break; |
| |
| case RADIUS_ATTR_PORT_LIMIT: |
| CONV2DIAM_32B( Port_Limit ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_LAT_PORT: |
| CONV2DIAM_STR( Login_LAT_Port ); |
| break; |
| |
| /* RFC 3162 */ |
| case RADIUS_ATTR_NAS_IPV6_ADDRESS: |
| CONV2DIAM_STR( NAS_IPv6_Address ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_INTERFACE_ID: |
| CONV2DIAM_64B( Framed_Interface_Id ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IPV6_PREFIX: |
| CONV2DIAM_STR( Framed_IPv6_Prefix ); |
| break; |
| |
| case RADIUS_ATTR_LOGIN_IPV6_HOST: |
| CONV2DIAM_STR( Login_IPv6_Host ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IPV6_ROUTE: |
| CONV2DIAM_STR( Framed_IPv6_Route ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_IPV6_POOL: |
| CONV2DIAM_STR( Framed_IPv6_Pool ); |
| break; |
| |
| /* RFC 2868 */ |
| /* Prepare the top-level Tunneling AVP for each tag values, as needed, and add to the Diameter message. |
| This macro is called when an AVP is added inside the group, so we will not have empty grouped AVPs */ |
| #define AVP_TUN_PREPARE() { \ |
| if (avp_tun == NULL) { \ |
| CHECK_MALLOC( avp_tun = calloc(sizeof(struct avp *), 32 ) ); \ |
| } \ |
| tag = *(uint8_t *)(attr + 1); \ |
| if (tag > 0x1F) tag = 0; \ |
| if (avp_tun[tag] == NULL) { \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Tunneling, 0, &avp_tun[tag] ) ); \ |
| CHECK_FCT( fd_msg_avp_add (*diam_fw, MSG_BRW_LAST_CHILD, avp_tun[tag]));\ |
| } \ |
| } |
| |
| /* Convert an attribute to an OctetString AVP and add inside the Tunneling AVP corresponding to the tag */ |
| #define CONV2DIAM_TUN_STR( _dictobj_ ) { \ |
| uint8_t tag; \ |
| CHECK_PARAMS( attr->length >= 3); \ |
| AVP_TUN_PREPARE(); \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| value.os.len = attr->length - (tag ? 3 : 2); \ |
| value.os.data = ((unsigned char *)(attr + 1)) + (tag ? 1 : 0); \ |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| CHECK_FCT( fd_msg_avp_add ( avp_tun[tag], MSG_BRW_LAST_CHILD, avp) ); \ |
| } |
| |
| /* Convert an attribute to a scalar AVP and add inside the Tunneling AVP corresponding to the tag */ |
| #define CONV2DIAM_TUN_24B( _dictobj_ ) { \ |
| uint8_t tag; \ |
| CHECK_PARAMS( attr->length == 6); \ |
| AVP_TUN_PREPARE(); \ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| { \ |
| uint8_t * v = (uint8_t *)(attr + 1); \ |
| value.u32 = (v[1] << 16) | (v[2] <<8) | v[3] ; \ |
| } \ |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| CHECK_FCT( fd_msg_avp_add ( avp_tun[tag], MSG_BRW_LAST_CHILD, avp) ); \ |
| } |
| |
| /* |
| - If the RADIUS message contains Tunnel information [RADTunnels], |
| the attributes or tagged groups should each be converted to a |
| Diameter Tunneling Grouped AVP set. If the tunnel information |
| contains a Tunnel-Password attribute, the RADIUS encryption |
| must be resolved, and the password forwarded, by using Diameter |
| security methods. |
| -> If the RADIUS message does not use properly the Tag info, result is unpredictable here.. |
| */ |
| case RADIUS_ATTR_TUNNEL_TYPE: |
| CONV2DIAM_TUN_24B( Tunnel_Type ); |
| break; |
| |
| case RADIUS_ATTR_TUNNEL_MEDIUM_TYPE: |
| CONV2DIAM_TUN_24B( Tunnel_Medium_Type ); |
| break; |
| |
| case RADIUS_ATTR_TUNNEL_CLIENT_ENDPOINT: |
| CONV2DIAM_TUN_STR( Tunnel_Client_Endpoint ); |
| break; |
| |
| case RADIUS_ATTR_TUNNEL_SERVER_ENDPOINT: |
| CONV2DIAM_TUN_STR( Tunnel_Server_Endpoint ); |
| break; |
| |
| /* Tunnel-Password never present in an Accounting-Request */ |
| |
| case RADIUS_ATTR_TUNNEL_PRIVATE_GROUP_ID: |
| CONV2DIAM_TUN_STR( Tunnel_Private_Group_Id ); |
| break; |
| |
| case RADIUS_ATTR_TUNNEL_ASSIGNMENT_ID: |
| CONV2DIAM_TUN_STR( Tunnel_Assignment_Id ); |
| break; |
| |
| /* Tunnel-Reference never present in an Accounting-Request */ |
| |
| case RADIUS_ATTR_TUNNEL_CLIENT_AUTH_ID: |
| CONV2DIAM_TUN_STR( Tunnel_Client_Auth_Id ); |
| break; |
| |
| case RADIUS_ATTR_TUNNEL_SERVER_AUTH_ID: |
| CONV2DIAM_TUN_STR( Tunnel_Server_Auth_Id ); |
| break; |
| |
| /* RFC 2869 */ |
| /* |
| Acct-Input-Gigawords, Acct-Output- |
| Gigawords, Event-Timestamp, and NAS-Port-Id may have 0-1 instances in |
| an Accounting-Request packet. Connect-Info may have 0+ instances in |
| an Accounting-Request packet. The other attributes added in this |
| document must not be present in an Accounting-Request. |
| */ |
| case RADIUS_ATTR_ACCT_INPUT_GIGAWORDS: |
| break; /* we already saved the value in gigawords_in */ |
| |
| case RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS: |
| break; /* we already saved the value in gigawords_out */ |
| |
| case RADIUS_ATTR_EVENT_TIMESTAMP: |
| /* RADIUS: |
| The Value field is four octets encoding an unsigned integer with |
| the number of seconds since January 1, 1970 00:00 UTC. |
| Diameter: |
| The Time format is derived from the OctetString AVP Base Format. |
| The string MUST contain four octets, in the same format as the |
| first four bytes are in the NTP timestamp format. The NTP |
| Timestamp format is defined in Chapter 3 of [RFC4330]. |
| |
| This represents the number of seconds since 0h on 1 January 1900 |
| with respect to the Coordinated Universal Time (UTC). |
| |
| -- RFC4330: |
| NTP timestamps are represented as a 64-bit unsigned |
| fixed-point number, in seconds relative to 0h on 1 January 1900. The |
| integer part is in the first 32 bits, and the fraction part in the |
| last 32 bits. In the fraction part, the non-significant low-order |
| bits are not specified and are ordinarily set to 0. |
| */ |
| { |
| uint32_t ts; |
| |
| uint8_t * v = (uint8_t *)(attr + 1); |
| /* Read the RADIUS attribute value */ |
| ts = (v[0] << 24) |
| | (v[1] << 16) |
| | (v[2] << 8) |
| | v[3] ; |
| |
| /* Add the 70 missing years */ |
| ts += 2208988800U; /* 60 * 60 * 24 * ( 365 * 70 + 17 ) */ |
| |
| /* Convert to network byte order */ |
| ts = htonl(ts); |
| |
| /* Diameter Time datatype is derived from OctetString */ |
| value.os.data = (void *) &ts; |
| value.os.len = sizeof(uint32_t); |
| |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Event_Timestamp, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| } |
| break; |
| |
| case RADIUS_ATTR_NAS_PORT_ID: |
| CONV2DIAM_STR( NAS_Port_Id ); |
| break; |
| |
| case RADIUS_ATTR_CONNECT_INFO: |
| CONV2DIAM_STR( Connect_Info ); |
| break; |
| |
| case RADIUS_ATTR_FRAMED_POOL: /* To follow the IPv6 version */ |
| CONV2DIAM_STR( Framed_Pool ); |
| break; |
| |
| |
| /* RFC 3579 */ |
| /* |
| The EAP-Message and Message-Authenticator attributes specified in |
| this document MUST NOT be present in an Accounting-Request. |
| */ |
| case RADIUS_ATTR_ORIGINATING_LINE_INFO: |
| CONV2DIAM_STR( Originating_Line_Info ); |
| break; |
| |
| /* Default */ |
| default: /* unknown attribute */ |
| /* We just keep the attribute in the RADIUS message */ |
| rad_req->attr_pos[nattr_used++] = rad_req->attr_pos[idx]; |
| } |
| } |
| |
| /* Update the radius message to remove all handled attributes */ |
| rad_req->attr_used = nattr_used; |
| |
| /* Store useful information in the session */ |
| { |
| struct sess_state * st; |
| |
| CHECK_MALLOC( st = malloc(sizeof(struct sess_state)) ); |
| memset(st, 0, sizeof(struct sess_state)); |
| st->auth_appl = auth_appl; |
| if (auth_appl) { /* We use the value 0 for servers which indicated NO STATE MAINTAINED, hence have no need for STR */ |
| st->send_str = send_str; |
| } |
| st->term_cause = str_cause; |
| CHECK_FCT( fd_sess_state_store( cs->sess_hdl, sess, &st ) ); |
| } |
| |
| return 0; |
| } |
| |
| /* Callback when an STA is received after having sent an STR. */ |
| static void handle_sta(void * data, struct msg ** answer) |
| { |
| struct rgwp_config * cs = data; |
| struct avp *avp; |
| struct avp_hdr *ahdr; |
| |
| CHECK_PARAMS_DO( data && answer && *answer, goto out ); |
| |
| /* Check the Diameter error code */ |
| CHECK_FCT_DO( fd_msg_search_avp (*answer, cs->dict.Result_Code, &avp), goto out ); |
| CHECK_PARAMS_DO( avp, goto out ); |
| CHECK_FCT_DO( fd_msg_avp_hdr ( avp, &ahdr ), goto out ); |
| if (ahdr->avp_value->u32 != ER_DIAMETER_SUCCESS) |
| goto out; |
| |
| /* OK, discard the message without complaining */ |
| fd_msg_free(*answer); |
| *answer = NULL; |
| |
| out: |
| if (answer && *answer) { |
| char * buf = NULL; size_t buflen; |
| CHECK_MALLOC_DO( fd_msg_dump_treeview(&buf, &buflen, NULL, *answer, NULL, 0, 1), ); |
| TRACE_DEBUG(INFO, "Received the following problematic STA message, discarding anyway: %s", buf ?: "<error>"); |
| free(buf); |
| |
| fd_msg_free(*answer); |
| *answer = NULL; |
| } |
| return; |
| } |
| |
| static int acct_diam_ans( struct rgwp_config * cs, struct msg ** diam_ans, struct radius_msg ** rad_fw, struct rgw_client * cli ) |
| { |
| struct session * sess; |
| struct sess_state * st = NULL, stloc; |
| struct avp *avp, *next; |
| struct avp_hdr *ahdr, *oh, *or; |
| os0_t sid = NULL; |
| size_t sidlen; |
| |
| TRACE_ENTRY("%p %p %p %p", cs, diam_ans, rad_fw, cli); |
| CHECK_PARAMS(cs); |
| |
| CHECK_FCT( fd_msg_sess_get(fd_g_config->cnf_dict, *diam_ans, &sess, NULL) ); |
| if (sess) { |
| CHECK_FCT( fd_sess_state_retrieve( cs->sess_hdl, sess, &st ) ); |
| CHECK_FCT( fd_sess_getsid(sess, &sid, &sidlen) ); |
| } |
| |
| if (!st) { |
| TRACE_DEBUG(INFO, "Received an ACA without corresponding session information, cannot translate to RADIUS"); |
| return EINVAL; |
| } |
| |
| /* Free the state */ |
| memcpy(&stloc, st, sizeof(struct sess_state)); |
| free(st); |
| st = &stloc; |
| |
| /* Search these AVPs first */ |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Origin_Host, &avp) ); |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &oh ) ); |
| |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Origin_Realm, &avp) ); |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &or ) ); |
| |
| /* Check the Diameter error code */ |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Result_Code, &avp) ); |
| ASSERT( avp ); /* otherwise the message should have been discarded a lot earlier because of ABNF */ |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| switch (ahdr->avp_value->u32) { |
| case ER_DIAMETER_SUCCESS: |
| case ER_DIAMETER_LIMITED_SUCCESS: |
| (*rad_fw)->hdr->code = RADIUS_CODE_ACCOUNTING_RESPONSE; |
| break; |
| |
| default: |
| fd_log_debug("[acct.rgwx] Received Diameter answer with error code '%d' from server '%.*s', session %.*s, not translating into Accounting-Response", |
| ahdr->avp_value->u32, |
| (int)oh->avp_value->os.len, oh->avp_value->os.data, |
| (int)sidlen, sid); |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Error_Message, &avp) ); |
| if (avp) { |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| fd_log_debug("[acct.rgwx] Error-Message content: '%.*s'", |
| (int)ahdr->avp_value->os.len, ahdr->avp_value->os.data); |
| } |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Error_Reporting_Host, &avp) ); |
| if (avp) { |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| fd_log_debug("[acct.rgwx] Error-Reporting-Host: '%.*s'", |
| (int)ahdr->avp_value->os.len, ahdr->avp_value->os.data); |
| } |
| CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Failed_AVP, &avp) ); |
| if (avp) { |
| fd_log_debug("[acct.rgwx] Failed-AVP was included in the message."); |
| /* Dump its content ? */ |
| } |
| |
| /* Now, destroy the Diameter message, since we know it is not converted to RADIUS */ |
| CHECK_FCT( fd_msg_free(*diam_ans) ); |
| *diam_ans = NULL; |
| |
| return -1; |
| } |
| /* Remove this Result-Code avp */ |
| CHECK_FCT( fd_msg_free( avp ) ); |
| |
| /* If it was a response to a STOP record, we must send an STR for this session */ |
| if (st->send_str) { |
| struct msg * str = NULL; |
| struct msg_hdr * hdr = NULL; |
| DiamId_t fqdn; |
| size_t fqdn_len; |
| DiamId_t realm; |
| size_t realm_len; |
| union avp_value avp_val; |
| |
| /* Create a new STR message */ |
| CHECK_FCT( fd_msg_new ( cs->dict.Session_Termination_Request, MSGFL_ALLOC_ETEID, &str ) ); |
| |
| /* Set the application-id to the auth application if available, accounting otherwise (not sure what is actually expected...) */ |
| CHECK_FCT( fd_msg_hdr ( str, &hdr ) ); |
| hdr->msg_appl = st->auth_appl ?: AI_ACCT; |
| |
| /* Add the Session-Id AVP as first AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Session_Id, 0, &avp ) ); |
| avp_val.os.data = sid; |
| avp_val.os.len = sidlen; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &avp_val ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_FIRST_CHILD, avp) ); |
| CHECK_FCT( fd_sess_ref_msg(sess) ); |
| |
| /* Add the Destination-Realm as next AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Destination_Realm, 0, &avp ) ); |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, or->avp_value ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* Get information on the NAS */ |
| CHECK_FCT( rgw_clients_get_origin(cli, &fqdn, &fqdn_len, &realm, &realm_len) ); |
| |
| /* Add the Origin-Host as next AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Origin_Host, 0, &avp ) ); |
| memset(&avp_val, 0, sizeof(avp_val)); |
| avp_val.os.data = (unsigned char *)fqdn; |
| avp_val.os.len = fqdn_len; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &avp_val ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* Add the Origin-Realm as next AVP */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Origin_Realm, 0, &avp ) ); |
| memset(&avp_val, 0, sizeof(avp_val)); |
| avp_val.os.data = (unsigned char *)realm; |
| avp_val.os.len = realm_len; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &avp_val ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* Auth-Application-Id -- if we did not get it from our Class attribute, we just set "0" */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Auth_Application_Id, 0, &avp ) ); |
| avp_val.u32 = st->auth_appl; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &avp_val ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* Termination-Cause */ |
| CHECK_FCT( fd_msg_avp_new ( cs->dict.Termination_Cause, 0, &avp ) ); |
| avp_val.u32 = st->term_cause; |
| CHECK_FCT( fd_msg_avp_setvalue ( avp, &avp_val ) ); |
| CHECK_FCT( fd_msg_avp_add ( str, MSG_BRW_LAST_CHILD, avp) ); |
| |
| /* Send this message */ |
| CHECK_FCT( fd_msg_send ( &str, handle_sta, cs ) ); |
| } |
| |
| /* |
| No attributes should be found in |
| Accounting-Response packets except Proxy-State and possibly Vendor- |
| Specific. |
| */ |
| |
| /* Now loop in the list of AVPs and convert those that we know how */ |
| CHECK_FCT( fd_msg_browse(*diam_ans, MSG_BRW_FIRST_CHILD, &next, NULL) ); |
| |
| while (next) { |
| int handled = 1; |
| avp = next; |
| CHECK_FCT( fd_msg_browse(avp, MSG_BRW_NEXT, &next, NULL) ); |
| |
| CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| |
| if (!(ahdr->avp_flags & AVP_FLAG_VENDOR)) { |
| switch (ahdr->avp_code) { |
| /* Based on RFC4005, sec 3.10 */ |
| case DIAM_ATTR_SESSION_ID: |
| case DIAM_ATTR_ORIGIN_HOST: |
| case DIAM_ATTR_ORIGIN_REALM: |
| case DIAM_ATTR_ACCOUNTING_RECORD_TYPE: |
| case DIAM_ATTR_ACCOUNTING_RECORD_NUMBER: |
| case DIAM_ATTR_ACCT_APPLICATION_ID: |
| case DIAM_ATTR_VENDOR_SPECIFIC_APPLICATION_ID: |
| case DIAM_ATTR_USER_NAME: |
| case DIAM_ATTR_ACCOUNTING_SUB_SESSION_ID: |
| case DIAM_ATTR_ACCT_SESSION_ID: |
| case DIAM_ATTR_ACCT_MULTI_SESSION_ID: |
| case DIAM_ATTR_EVENT_TIMESTAMP: |
| case DIAM_ATTR_ORIGIN_AAA_PROTOCOL: |
| case DIAM_ATTR_ORIGIN_STATE_ID: |
| case DIAM_ATTR_NAS_IDENTIFIER: |
| case DIAM_ATTR_NAS_IP_ADDRESS: |
| case DIAM_ATTR_NAS_IPV6_ADDRESS: |
| case DIAM_ATTR_NAS_PORT: |
| case DIAM_ATTR_NAS_PORT_ID: |
| case DIAM_ATTR_NAS_PORT_TYPE: |
| case DIAM_ATTR_SERVICE_TYPE: |
| case DIAM_ATTR_TERMINATION_CAUSE: |
| case DIAM_ATTR_ACCOUNTING_REALTIME_REQUIRED: |
| case DIAM_ATTR_ACCT_INTERIM_INTERVAL: |
| case DIAM_ATTR_CLASS: |
| /* We just remove these AVP, they are not expected in RADIUS client */ |
| break; |
| |
| default: |
| /* Leave the AVP in the message for further treatment */ |
| handled = 0; |
| } |
| } else { |
| /* Vendor-specific AVPs */ |
| switch (ahdr->avp_vendor) { |
| |
| default: /* unknown vendor */ |
| handled = 0; |
| } |
| } |
| |
| if (handled) { |
| CHECK_FCT( fd_msg_free( avp ) ); |
| } |
| } |
| |
| /* |
| The Authenticator field in an Accounting-Response packet is called |
| the Response Authenticator, and contains a one-way MD5 hash |
| calculated over a stream of octets consisting of the Accounting- |
| Response Code, Identifier, Length, the Request Authenticator field |
| from the Accounting-Request packet being replied to, and the |
| response attributes if any, followed by the shared secret. The |
| resulting 16 octet MD5 hash value is stored in the Authenticator |
| field of the Accounting-Response packet. |
| |
| -- done in radius_msg_finish_srv |
| */ |
| |
| return 0; |
| } |
| |
| /* The exported symbol */ |
| struct rgw_api rgwp_descriptor = { |
| .rgwp_name = "acct", |
| .rgwp_conf_parse = acct_conf_parse, |
| .rgwp_conf_free = acct_conf_free, |
| .rgwp_rad_req = acct_rad_req, |
| .rgwp_diam_ans = acct_diam_ans |
| }; |