Brian Waters | 13d9601 | 2017-12-08 16:53:31 -0600 | [diff] [blame] | 1 | /********************************************************************************************************* |
| 2 | * Software License Agreement (BSD License) * |
| 3 | * Author: Sebastien Decugis <sdecugis@freediameter.net> * |
| 4 | * * |
| 5 | * Copyright (c) 2013, WIDE Project and NICT * |
| 6 | * All rights reserved. * |
| 7 | * * |
| 8 | * Redistribution and use of this software in source and binary forms, with or without modification, are * |
| 9 | * permitted provided that the following conditions are met: * |
| 10 | * * |
| 11 | * * Redistributions of source code must retain the above * |
| 12 | * copyright notice, this list of conditions and the * |
| 13 | * following disclaimer. * |
| 14 | * * |
| 15 | * * Redistributions in binary form must reproduce the above * |
| 16 | * copyright notice, this list of conditions and the * |
| 17 | * following disclaimer in the documentation and/or other * |
| 18 | * materials provided with the distribution. * |
| 19 | * * |
| 20 | * * Neither the name of the WIDE Project or NICT nor the * |
| 21 | * names of its contributors may be used to endorse or * |
| 22 | * promote products derived from this software without * |
| 23 | * specific prior written permission of WIDE Project and * |
| 24 | * NICT. * |
| 25 | * * |
| 26 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED * |
| 27 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * |
| 28 | * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR * |
| 29 | * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * |
| 30 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * |
| 31 | * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR * |
| 32 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * |
| 33 | * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * |
| 34 | *********************************************************************************************************/ |
| 35 | |
| 36 | /* RADIUS Access-Request messages translation plugin */ |
| 37 | |
| 38 | #include "rgw_common.h" |
| 39 | |
| 40 | /* Attributes missing from radius.h */ |
| 41 | #define RADIUS_ATTR_CHAP_PASSWORD 3 |
| 42 | #define RADIUS_ATTR_ARAP_PASSWORD 70 |
| 43 | |
| 44 | /* Other constants we use */ |
| 45 | #define AI_NASREQ 1 /* Diameter NASREQ */ |
| 46 | #define AI_EAP 5 /* Diameter EAP application */ |
| 47 | #define CC_AA 265 /* AAR */ |
| 48 | #define CC_DIAMETER_EAP 268 /* DER */ |
| 49 | #define ACV_ART_AUTHORIZE_AUTHENTICATE 3 /* AUTHORIZE_AUTHENTICATE */ |
| 50 | #define ACV_OAP_RADIUS 1 /* RADIUS */ |
| 51 | #define ACV_ASS_STATE_MAINTAINED 0 /* STATE_MAINTAINED */ |
| 52 | #define ACV_ASS_NO_STATE_MAINTAINED 1 /* NO_STATE_MAINTAINED */ |
| 53 | |
| 54 | /* The state we keep for this plugin */ |
| 55 | struct rgwp_config { |
| 56 | struct { |
| 57 | struct dict_object * ARAP_Password; /* ARAP-Password */ |
| 58 | struct dict_object * ARAP_Security; /* ARAP-Security */ |
| 59 | struct dict_object * ARAP_Security_Data; /* ARAP-Security-Data */ |
| 60 | struct dict_object * Auth_Application_Id; /* Auth-Application-Id */ |
| 61 | struct dict_object * Auth_Request_Type; /* Auth-Request-Type */ |
| 62 | struct dict_object * Authorization_Lifetime; /* Authorization-Lifetime */ |
| 63 | struct dict_object * Callback_Number; /* Callback-Number */ |
| 64 | struct dict_object * Called_Station_Id; /* Called-Station-Id */ |
| 65 | struct dict_object * Calling_Station_Id; /* Calling-Station-Id */ |
| 66 | struct dict_object * CHAP_Algorithm; /* CHAP-Algorithm */ |
| 67 | struct dict_object * CHAP_Auth; /* CHAP-Auth */ |
| 68 | struct dict_object * CHAP_Challenge; /* CHAP-Challenge */ |
| 69 | struct dict_object * CHAP_Ident; /* CHAP-Ident */ |
| 70 | struct dict_object * CHAP_Response; /* CHAP-Response */ |
| 71 | struct dict_object * Destination_Host; /* Destination-Host */ |
| 72 | struct dict_object * Destination_Realm; /* Destination-Realm */ |
| 73 | struct dict_object * Connect_Info; /* Connect-Info */ |
| 74 | struct dict_object * EAP_Payload; /* EAP-Payload */ |
| 75 | struct dict_object * Error_Message; /* Error-Message */ |
| 76 | struct dict_object * Error_Reporting_Host; /* Error-Reporting-Host */ |
| 77 | struct dict_object * Failed_AVP; /* Failed-AVP */ |
| 78 | struct dict_object * Framed_Compression; /* Framed-Compression */ |
| 79 | struct dict_object * Framed_IP_Address; /* Framed-IP-Address */ |
| 80 | struct dict_object * Framed_IP_Netmask; /* Framed-IP-Netmask */ |
| 81 | struct dict_object * Framed_Interface_Id; /* Framed-Interface-Id */ |
| 82 | struct dict_object * Framed_IPv6_Prefix; /* Framed-IPv6-Prefix */ |
| 83 | struct dict_object * Framed_MTU; /* Framed-MTU */ |
| 84 | struct dict_object * Framed_Protocol; /* Framed-Protocol */ |
| 85 | struct dict_object * Login_IP_Host; /* Login-IP-Host */ |
| 86 | struct dict_object * Login_IPv6_Host; /* Login-IPv6-Host */ |
| 87 | struct dict_object * Login_LAT_Group; /* Login-LAT-Group */ |
| 88 | struct dict_object * Login_LAT_Node; /* Login-LAT-Node */ |
| 89 | struct dict_object * Login_LAT_Port; /* Login-LAT-Port */ |
| 90 | struct dict_object * Login_LAT_Service; /* Login-LAT-Service */ |
| 91 | struct dict_object * NAS_Identifier; /* NAS-Identifier */ |
| 92 | struct dict_object * NAS_IP_Address; /* NAS-IP-Address */ |
| 93 | struct dict_object * NAS_IPv6_Address; /* NAS-IPv6-Address */ |
| 94 | struct dict_object * NAS_Port; /* NAS-Port */ |
| 95 | struct dict_object * NAS_Port_Id; /* NAS-Port-Id */ |
| 96 | struct dict_object * NAS_Port_Type; /* NAS-Port-Type */ |
| 97 | struct dict_object * Origin_AAA_Protocol; /* Origin-AAA-Protocol */ |
| 98 | struct dict_object * Origin_Host; /* Origin-Host */ |
| 99 | struct dict_object * Origin_Realm; /* Origin-Realm */ |
| 100 | struct dict_object * Originating_Line_Info; /* Originating-Line-Info */ |
| 101 | struct dict_object * Port_Limit; /* Port-Limit */ |
| 102 | struct dict_object * Re_Auth_Request_Type; /* Re-Auth-Request-Type */ |
| 103 | struct dict_object * Result_Code; /* Result-Code */ |
| 104 | struct dict_object * Service_Type; /* Service-Type */ |
| 105 | struct dict_object * Session_Id; /* Session-Id */ |
| 106 | struct dict_object * Session_Timeout; /* Session-Timeout */ |
| 107 | struct dict_object * State; /* State */ |
| 108 | struct dict_object * Tunneling; /* Tunneling */ |
| 109 | struct dict_object * Tunnel_Type; /* Tunnel-Type */ |
| 110 | struct dict_object * Tunnel_Medium_Type; /* Tunnel-Medium-Type */ |
| 111 | struct dict_object * Tunnel_Client_Endpoint; /* Tunnel-Client-Endpoint */ |
| 112 | struct dict_object * Tunnel_Server_Endpoint; /* Tunnel-Server-Endpoint */ |
| 113 | struct dict_object * Tunnel_Private_Group_Id; /* Tunnel-Private-Group-Id */ |
| 114 | struct dict_object * Tunnel_Preference; /* Tunnel-Preference */ |
| 115 | struct dict_object * Tunnel_Client_Auth_Id; /* Tunnel-Client-Auth-Id */ |
| 116 | struct dict_object * Tunnel_Server_Auth_Id; /* Tunnel-Server-Auth-Id */ |
| 117 | struct dict_object * User_Name; /* User-Name */ |
| 118 | struct dict_object * User_Password; /* User-Password */ |
| 119 | |
| 120 | } dict; /* cache of the dictionary objects we use */ |
| 121 | struct session_handler * sess_hdl; /* We store RADIUS request authenticator information in the session */ |
| 122 | char * confstr; |
| 123 | |
| 124 | int ignore_nai; |
| 125 | }; |
| 126 | |
| 127 | struct sess_state { |
| 128 | uint8_t req_auth[16]; |
| 129 | }; |
| 130 | |
| 131 | |
| 132 | /* Initialize the plugin */ |
| 133 | static int auth_conf_parse(char * confstr, struct rgwp_config ** state) |
| 134 | { |
| 135 | struct rgwp_config * new; |
| 136 | struct dict_object * app; |
| 137 | |
| 138 | TRACE_ENTRY("%p %p", confstr, state); |
| 139 | CHECK_PARAMS( state ); |
| 140 | |
| 141 | CHECK_MALLOC( new = malloc(sizeof(struct rgwp_config)) ); |
| 142 | memset(new, 0, sizeof(struct rgwp_config)); |
| 143 | |
| 144 | CHECK_FCT( fd_sess_handler_create( &new->sess_hdl, (void *)free, NULL, NULL ) ); |
| 145 | new->confstr = confstr; |
| 146 | |
| 147 | if (confstr && strstr(confstr, "nonai")) |
| 148 | new->ignore_nai = 1; |
| 149 | |
| 150 | /* Resolve all dictionary objects we use */ |
| 151 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Password", &new->dict.ARAP_Password, ENOENT) ); |
| 152 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Security", &new->dict.ARAP_Security, ENOENT) ); |
| 153 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "ARAP-Security-Data", &new->dict.ARAP_Security_Data, ENOENT) ); |
| 154 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Auth-Application-Id", &new->dict.Auth_Application_Id, ENOENT) ); |
| 155 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Auth-Request-Type", &new->dict.Auth_Request_Type, ENOENT) ); |
| 156 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Authorization-Lifetime", &new->dict.Authorization_Lifetime, ENOENT) ); |
| 157 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Callback-Number", &new->dict.Callback_Number, ENOENT) ); |
| 158 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Called-Station-Id", &new->dict.Called_Station_Id, ENOENT) ); |
| 159 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Calling-Station-Id", &new->dict.Calling_Station_Id, ENOENT) ); |
| 160 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "CHAP-Algorithm", &new->dict.CHAP_Algorithm, ENOENT) ); |
| 161 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "CHAP-Auth", &new->dict.CHAP_Auth, ENOENT) ); |
| 162 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "CHAP-Challenge", &new->dict.CHAP_Challenge, ENOENT) ); |
| 163 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "CHAP-Ident", &new->dict.CHAP_Ident, ENOENT) ); |
| 164 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "CHAP-Response", &new->dict.CHAP_Response, ENOENT) ); |
| 165 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Connect-Info", &new->dict.Connect_Info, ENOENT) ); |
| 166 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Destination-Host", &new->dict.Destination_Host, ENOENT) ); |
| 167 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Destination-Realm", &new->dict.Destination_Realm, ENOENT) ); |
| 168 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "EAP-Payload", &new->dict.EAP_Payload, ENOENT) ); |
| 169 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Error-Message", &new->dict.Error_Message, ENOENT) ); |
| 170 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Error-Reporting-Host", &new->dict.Error_Reporting_Host, ENOENT) ); |
| 171 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Failed-AVP", &new->dict.Failed_AVP, ENOENT) ); |
| 172 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Compression", &new->dict.Framed_Compression, ENOENT) ); |
| 173 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IP-Address", &new->dict.Framed_IP_Address, ENOENT) ); |
| 174 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IP-Netmask", &new->dict.Framed_IP_Netmask, ENOENT) ); |
| 175 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Interface-Id", &new->dict.Framed_Interface_Id, ENOENT) ); |
| 176 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-IPv6-Prefix", &new->dict.Framed_IPv6_Prefix, ENOENT) ); |
| 177 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-MTU", &new->dict.Framed_MTU, ENOENT) ); |
| 178 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Framed-Protocol", &new->dict.Framed_Protocol, ENOENT) ); |
| 179 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-IP-Host", &new->dict.Login_IP_Host, ENOENT) ); |
| 180 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-IPv6-Host", &new->dict.Login_IPv6_Host, ENOENT) ); |
| 181 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Group", &new->dict.Login_LAT_Group, ENOENT) ); |
| 182 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Node", &new->dict.Login_LAT_Node, ENOENT) ); |
| 183 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Port", &new->dict.Login_LAT_Port, ENOENT) ); |
| 184 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Login-LAT-Service", &new->dict.Login_LAT_Service, ENOENT) ); |
| 185 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Identifier", &new->dict.NAS_Identifier, ENOENT) ); |
| 186 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-IP-Address", &new->dict.NAS_IP_Address, ENOENT) ); |
| 187 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-IPv6-Address", &new->dict.NAS_IPv6_Address, ENOENT) ); |
| 188 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port", &new->dict.NAS_Port, ENOENT) ); |
| 189 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port-Id", &new->dict.NAS_Port_Id, ENOENT) ); |
| 190 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "NAS-Port-Type", &new->dict.NAS_Port_Type, ENOENT) ); |
| 191 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-AAA-Protocol", &new->dict.Origin_AAA_Protocol, ENOENT) ); |
| 192 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-Host", &new->dict.Origin_Host, ENOENT) ); |
| 193 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Origin-Realm", &new->dict.Origin_Realm, ENOENT) ); |
| 194 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Originating-Line-Info", &new->dict.Originating_Line_Info, ENOENT) ); |
| 195 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Port-Limit", &new->dict.Port_Limit, ENOENT) ); |
| 196 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Re-Auth-Request-Type", &new->dict.Re_Auth_Request_Type, ENOENT) ); |
| 197 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Result-Code", &new->dict.Result_Code, ENOENT) ); |
| 198 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Service-Type", &new->dict.Service_Type, ENOENT) ); |
| 199 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Session-Id", &new->dict.Session_Id, ENOENT) ); |
| 200 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Session-Timeout", &new->dict.Session_Timeout, ENOENT) ); |
| 201 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "State", &new->dict.State, ENOENT) ); |
| 202 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunneling", &new->dict.Tunneling, ENOENT) ); |
| 203 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Type", &new->dict.Tunnel_Type, ENOENT) ); |
| 204 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Medium-Type", &new->dict.Tunnel_Medium_Type, ENOENT) ); |
| 205 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Client-Endpoint", &new->dict.Tunnel_Client_Endpoint, ENOENT) ); |
| 206 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Server-Endpoint", &new->dict.Tunnel_Server_Endpoint, ENOENT) ); |
| 207 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Private-Group-Id", &new->dict.Tunnel_Private_Group_Id, ENOENT) ); |
| 208 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Preference", &new->dict.Tunnel_Preference, ENOENT) ); |
| 209 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Client-Auth-Id", &new->dict.Tunnel_Client_Auth_Id, ENOENT) ); |
| 210 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "Tunnel-Server-Auth-Id", &new->dict.Tunnel_Server_Auth_Id, ENOENT) ); |
| 211 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "User-Name", &new->dict.User_Name, ENOENT) ); |
| 212 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_NAME, "User-Password", &new->dict.User_Password, ENOENT) ); |
| 213 | |
| 214 | /* This plugin provides the following Diameter authentication applications support: */ |
| 215 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_APPLICATION, APPLICATION_BY_NAME, "Diameter Network Access Server Application", &app, ENOENT) ); |
| 216 | CHECK_FCT( fd_disp_app_support ( app, NULL, 1, 0 ) ); |
| 217 | |
| 218 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_APPLICATION, APPLICATION_BY_NAME, "Diameter Extensible Authentication Protocol (EAP) Application", &app, ENOENT) ); |
| 219 | CHECK_FCT( fd_disp_app_support ( app, NULL, 1, 0 ) ); |
| 220 | |
| 221 | *state = new; |
| 222 | return 0; |
| 223 | } |
| 224 | |
| 225 | /* deinitialize */ |
| 226 | static void auth_conf_free(struct rgwp_config * state) |
| 227 | { |
| 228 | TRACE_ENTRY("%p", state); |
| 229 | CHECK_PARAMS_DO( state, return ); |
| 230 | CHECK_FCT_DO( fd_sess_handler_destroy( &state->sess_hdl, NULL ), ); |
| 231 | free(state); |
| 232 | return; |
| 233 | } |
| 234 | |
| 235 | /* Handle an incoming RADIUS request */ |
| 236 | static int auth_rad_req( struct rgwp_config * cs, struct radius_msg * rad_req, struct radius_msg ** rad_ans, struct msg ** diam_fw, struct rgw_client * cli ) |
| 237 | { |
| 238 | int idx; |
| 239 | int got_id = 0; |
| 240 | int got_mac = 0; |
| 241 | int got_passwd = 0; |
| 242 | int got_eap = 0; |
| 243 | int got_empty_eap = 0; |
| 244 | const char * prefix = "Diameter/"; |
| 245 | size_t pref_len; |
| 246 | os0_t dh = NULL; |
| 247 | size_t dh_len = 0; |
| 248 | os0_t dr = NULL; |
| 249 | size_t dr_len = 0; |
| 250 | os0_t si = NULL; |
| 251 | size_t si_len = 0; |
| 252 | os0_t un = NULL; |
| 253 | size_t un_len = 0; |
| 254 | size_t nattr_used = 0; |
| 255 | struct avp ** avp_tun = NULL, *avp = NULL; |
| 256 | union avp_value value; |
| 257 | struct session * sess; |
| 258 | |
| 259 | TRACE_ENTRY("%p %p %p %p %p", cs, rad_req, rad_ans, diam_fw, cli); |
| 260 | CHECK_PARAMS(cs && rad_req && (rad_req->hdr->code == RADIUS_CODE_ACCESS_REQUEST) && rad_ans && diam_fw && *diam_fw); |
| 261 | |
| 262 | pref_len = strlen(prefix); |
| 263 | |
| 264 | /* |
| 265 | Guidelines: |
| 266 | http://tools.ietf.org/html/rfc4005#section-9.1 |
| 267 | http://tools.ietf.org/html/rfc4072#section-6.1 |
| 268 | |
| 269 | When a Translation Agent receives a RADIUS message, the following |
| 270 | steps should be taken: |
| 271 | |
| 272 | - If a Message-Authenticator attribute is present, the value MUST |
| 273 | be checked but not included in the Diameter message. If it is |
| 274 | incorrect, the RADIUS message should be silently discarded. |
| 275 | The gateway system SHOULD generate and include a Message- |
| 276 | Authenticator in returned RADIUS responses. |
| 277 | -> done in rgw_msg_auth_check |
| 278 | |
| 279 | - The transport address of the sender MUST be checked against the |
| 280 | NAS identifying attributes. See the description of NAS- |
| 281 | Identifier and NAS-IP-Address below. |
| 282 | -> done in rgw_clients_check_origin |
| 283 | |
| 284 | - The Translation Agent must maintain transaction state |
| 285 | information relevant to the RADIUS request, such as the |
| 286 | Identifier field in the RADIUS header, any existing RADIUS |
| 287 | Proxy-State attribute, and the source IP address and port |
| 288 | number of the UDP packet. These may be maintained locally in a |
| 289 | state table or saved in a Proxy-Info AVP group. A Diameter |
| 290 | Session-Id AVP value must be created using a session state |
| 291 | mapping mechanism. |
| 292 | -> Identifier, source and port are saved along with the request, |
| 293 | and associated with the session state. |
| 294 | -> sub_echo_drop should handle the Proxy-State attribute (conf issue) |
| 295 | |
| 296 | - The Diameter Origin-Host and Origin-Realm AVPs MUST be created |
| 297 | and added by using the information from an FQDN corresponding |
| 298 | to the NAS-IP-Address attribute (preferred if available), |
| 299 | and/or to the NAS-Identifier attribute. (Note that the RADIUS |
| 300 | NAS-Identifier is not required to be an FQDN.) |
| 301 | -> done in rgw_clients_create_origin. |
| 302 | |
| 303 | - The response MUST have an Origin-AAA-Protocol AVP added, |
| 304 | indicating the protocol of origin of the message. |
| 305 | -> what "response" ??? Added to the AAR / DER in this function. |
| 306 | |
| 307 | - The Proxy-Info group SHOULD be added, with the local server's |
| 308 | identity specified in the Proxy-Host AVP. This should ensure |
| 309 | that the response is returned to this system. |
| 310 | -> We don't need this, answer is always routed here anyway. |
| 311 | |
| 312 | For EAP: |
| 313 | |
| 314 | o RADIUS EAP-Message attribute(s) are translated to a Diameter |
| 315 | EAP-Payload AVP. If multiple RADIUS EAP-Message attributes are |
| 316 | present, they are concatenated and translated to a single Diameter |
| 317 | EAP-Payload AVP. |
| 318 | -> concatenation done by radius_msg_get_eap |
| 319 | |
| 320 | -> the remaining is specific conversion rules |
| 321 | */ |
| 322 | |
| 323 | /* Check basic information is there, and also retrieve some attribute information */ |
| 324 | for (idx = 0; idx < rad_req->attr_used; idx++) { |
| 325 | struct radius_attr_hdr * attr = (struct radius_attr_hdr *)(rad_req->buf + rad_req->attr_pos[idx]); |
| 326 | uint8_t * attr_val = (uint8_t *)(attr + 1); |
| 327 | size_t attr_len = attr->length - sizeof(struct radius_attr_hdr); |
| 328 | |
| 329 | switch (attr->type) { |
| 330 | case RADIUS_ATTR_NAS_IP_ADDRESS: |
| 331 | case RADIUS_ATTR_NAS_IDENTIFIER: |
| 332 | case RADIUS_ATTR_NAS_IPV6_ADDRESS: |
| 333 | got_id = 1; |
| 334 | break; |
| 335 | case RADIUS_ATTR_MESSAGE_AUTHENTICATOR: |
| 336 | got_mac = 1; |
| 337 | break; |
| 338 | case RADIUS_ATTR_EAP_MESSAGE: |
| 339 | got_eap = 1; |
| 340 | if (attr->length == 2) |
| 341 | got_empty_eap = 1; |
| 342 | break; |
| 343 | case RADIUS_ATTR_USER_PASSWORD: |
| 344 | case RADIUS_ATTR_CHAP_PASSWORD: |
| 345 | case RADIUS_ATTR_ARAP_PASSWORD: |
| 346 | got_passwd += 1; |
| 347 | break; |
| 348 | |
| 349 | /* Is there a State attribute with prefix "Diameter/" in the message? (in that case: Diameter/Destination-Host/Destination-Realm/Session-Id) */ |
| 350 | /* NOTE: RFC4005 says "Origin-Host" here, but it's not coherent with the rules for answers. Destination-Host makes more sense */ |
| 351 | case RADIUS_ATTR_STATE: |
| 352 | if ((attr_len > pref_len + 5 /* for the '/'s and non empty strings */ ) |
| 353 | && ! memcmp(attr_val, prefix, pref_len)) { |
| 354 | int i, start; |
| 355 | |
| 356 | TRACE_DEBUG(ANNOYING, "Found a State attribute with '%s' prefix (attr #%d).", prefix, idx); |
| 357 | |
| 358 | /* Now parse the value and check its content is valid. Unfortunately we cannot use strchr here since strings are not \0-terminated */ |
| 359 | |
| 360 | i = start = pref_len; |
| 361 | dh = attr_val + i; |
| 362 | for (; (i < attr_len - 2) && (attr_val[i] != '/'); i++) /* loop */; |
| 363 | if ( i >= attr_len - 2 ) continue; /* the attribute format is not good */ |
| 364 | dh_len = i - start; |
| 365 | |
| 366 | start = ++i; |
| 367 | dr = attr_val + i; |
| 368 | for (; (i < attr_len - 1) && (attr_val[i] != '/'); i++) /* loop */; |
| 369 | if ( i >= attr_len - 1 ) continue; /* the attribute format is not good */ |
| 370 | dr_len = i - start; |
| 371 | |
| 372 | i++; |
| 373 | si = attr_val + i; |
| 374 | si_len = attr_len - i; |
| 375 | |
| 376 | TRACE_DEBUG(ANNOYING, "Attribute parsed successfully: DH:'%.*s' DR:'%.*s' SI:'%.*s'.", (int)dh_len, dh, (int)dr_len, dr, (int)si_len, si); |
| 377 | /* Remove from the message */ |
| 378 | for (i = idx + 1; i < rad_req->attr_used; i++) |
| 379 | rad_req->attr_pos[i - 1] = rad_req->attr_pos[i]; |
| 380 | rad_req->attr_used -= 1; |
| 381 | idx--; |
| 382 | } |
| 383 | break; |
| 384 | |
| 385 | case RADIUS_ATTR_USER_NAME: |
| 386 | TRACE_DEBUG(ANNOYING, "Found a User-Name attribute: '%.*s'", (int)attr_len, attr_len ? (char *)attr_val : ""); |
| 387 | un = attr_val; |
| 388 | un_len = attr_len; |
| 389 | break; |
| 390 | |
| 391 | } |
| 392 | } |
| 393 | if (!got_id) { |
| 394 | TRACE_DEBUG(INFO, "RADIUS Access-Request did not contain a NAS IP or Identifier attribute, reject."); |
| 395 | return EINVAL; |
| 396 | } |
| 397 | /* [Note 1] An Access-Request that contains either a User-Password or |
| 398 | CHAP-Password or ARAP-Password or one or more EAP-Message attributes |
| 399 | MUST NOT contain more than one type of those four attributes. If it |
| 400 | does not contain any of those four attributes, it SHOULD contain a |
| 401 | Message-Authenticator. If any packet type contains an EAP-Message |
| 402 | attribute it MUST also contain a Message-Authenticator. A RADIUS |
| 403 | server receiving an Access-Request not containing any of those four |
| 404 | attributes and also not containing a Message-Authenticator attribute |
| 405 | SHOULD silently discard it. */ |
| 406 | if (((got_eap + got_passwd) > 1) || (got_eap && !got_mac) || (!got_eap && !got_passwd && !got_mac)) { |
| 407 | TRACE_DEBUG(INFO, "RADIUS Access-Request not conform to RFC3579 sec 3.3 note 1, discard."); |
| 408 | return EINVAL; |
| 409 | } |
| 410 | |
| 411 | |
| 412 | |
| 413 | /* |
| 414 | - If the RADIUS request contained a State attribute and the |
| 415 | prefix of the data is "Diameter/", the data following the |
| 416 | prefix contains the Diameter Origin-Host/Origin-Realm/Session- |
| 417 | Id. If no such attributes are present and the RADIUS command |
| 418 | is an Access-Request, a new Session-Id is created. The |
| 419 | Session-Id is included in the Session-Id AVP. |
| 420 | */ |
| 421 | |
| 422 | /* Add the Destination-Realm AVP */ |
| 423 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Destination_Realm, 0, &avp ) ); |
| 424 | if (dr) { |
| 425 | value.os.data = (unsigned char *)dr; |
| 426 | value.os.len = dr_len; |
| 427 | } else { |
| 428 | int i = 0; |
| 429 | if (un && ! cs->ignore_nai) { |
| 430 | /* Is there an '@' in the user name? We don't care for decorated NAI here */ |
| 431 | for (i = un_len - 2; i > 0; i--) { |
| 432 | if (un[i] == '@') { |
| 433 | i++; |
| 434 | break; |
| 435 | } |
| 436 | } |
| 437 | } |
| 438 | if (i <= 0) { |
| 439 | /* Not found in the User-Name => we use the local domain of this gateway */ |
| 440 | value.os.data = (uint8_t *)fd_g_config->cnf_diamrlm; |
| 441 | value.os.len = fd_g_config->cnf_diamrlm_len; |
| 442 | } else { |
| 443 | value.os.data = un + i; |
| 444 | value.os.len = un_len - i; |
| 445 | } |
| 446 | } |
| 447 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 448 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_FIRST_CHILD, avp) ); |
| 449 | |
| 450 | /* Add the Destination-Host if found */ |
| 451 | if (dh) { |
| 452 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Destination_Host, 0, &avp ) ); |
| 453 | value.os.data = (unsigned char *)dh; |
| 454 | value.os.len = dh_len; |
| 455 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 456 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_FIRST_CHILD, avp) ); |
| 457 | } |
| 458 | |
| 459 | /* Create the session if it is not already done */ |
| 460 | { |
| 461 | os0_t sess_str = NULL; |
| 462 | size_t sess_strlen; |
| 463 | |
| 464 | if (si_len) { |
| 465 | /* We already have the Session-Id, just use it */ |
| 466 | CHECK_FCT( fd_sess_fromsid_msg ( si, si_len, &sess, NULL) ); |
| 467 | } else { |
| 468 | /* Create a new Session-Id string */ |
| 469 | |
| 470 | DiamId_t fqdn; |
| 471 | size_t fqdnlen; |
| 472 | DiamId_t realm; |
| 473 | size_t realmlen; |
| 474 | |
| 475 | /* Get information on the RADIUS client */ |
| 476 | CHECK_FCT( rgw_clients_get_origin(cli, &fqdn, &fqdnlen, &realm, &realmlen) ); |
| 477 | |
| 478 | /* If we have a user name, create the new session with it */ |
| 479 | if (un) { |
| 480 | int len; |
| 481 | /* If not found, create a new Session-Id. Our format is: {fqdn;hi32;lo32;username;diamid} */ |
| 482 | CHECK_MALLOC( sess_str = malloc(un_len + 1 /* ';' */ + fd_g_config->cnf_diamid_len + 1 /* '\0' */) ); |
| 483 | len = sprintf((char *)sess_str, "%.*s;%s", (int)un_len, un, fd_g_config->cnf_diamid); |
| 484 | CHECK_FCT( fd_sess_new(&sess, fqdn, fqdnlen, sess_str, len) ); |
| 485 | free(sess_str); |
| 486 | } else { |
| 487 | /* We don't have enough information to create the Session-Id, the RADIUS message is probably invalid */ |
| 488 | TRACE_DEBUG(INFO, "RADIUS Access-Request does not contain a User-Name attribute, rejecting."); |
| 489 | return EINVAL; |
| 490 | } |
| 491 | } |
| 492 | |
| 493 | /* Now, add the Session-Id AVP at beginning of Diameter message */ |
| 494 | CHECK_FCT( fd_sess_getsid(sess, &sess_str, &sess_strlen) ); |
| 495 | TRACE_DEBUG(FULL, "[auth.rgwx] Translating new message for session '%s'...", sess_str); |
| 496 | |
| 497 | /* Now add this session in the message */ |
| 498 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Session_Id, 0, &avp ) ); |
| 499 | value.os.data = sess_str; |
| 500 | value.os.len = sess_strlen; |
| 501 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 502 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_FIRST_CHILD, avp) ); |
| 503 | CHECK_FCT( fd_msg_sess_set(*diam_fw, sess) ); |
| 504 | } |
| 505 | |
| 506 | |
| 507 | /* Add the appropriate command code & Auth-Application-Id */ |
| 508 | { |
| 509 | struct msg_hdr * header = NULL; |
| 510 | CHECK_FCT( fd_msg_hdr ( *diam_fw, &header ) ); |
| 511 | header->msg_flags = CMD_FLAG_REQUEST | CMD_FLAG_PROXIABLE; |
| 512 | if (got_eap) { |
| 513 | header->msg_code = CC_DIAMETER_EAP; |
| 514 | header->msg_appl = AI_EAP; |
| 515 | } else { |
| 516 | header->msg_code = CC_AA; |
| 517 | header->msg_appl = AI_NASREQ; |
| 518 | } |
| 519 | |
| 520 | /* Add the Auth-Application-Id */ |
| 521 | { |
| 522 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Auth_Application_Id, 0, &avp ) ); |
| 523 | value.i32 = header->msg_appl; |
| 524 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 525 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 526 | } |
| 527 | } |
| 528 | |
| 529 | /* The type of request is identified through the Auth-Request-Type AVP |
| 530 | [BASE]. The recommended value for most RADIUS interoperabily |
| 531 | situations is AUTHORIZE_AUTHENTICATE. */ |
| 532 | |
| 533 | /* Add Auth-Request-Type AVP */ |
| 534 | { |
| 535 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Auth_Request_Type, 0, &avp ) ); |
| 536 | value.i32 = ACV_ART_AUTHORIZE_AUTHENTICATE; |
| 537 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 538 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 539 | } |
| 540 | |
| 541 | /* Add Origin-AAA-Protocol AVP */ |
| 542 | { |
| 543 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Origin_AAA_Protocol, 0, &avp ) ); |
| 544 | value.i32 = ACV_OAP_RADIUS; |
| 545 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 546 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 547 | } |
| 548 | |
| 549 | /* Convert the EAP payload (concat RADIUS attributes) */ |
| 550 | if (got_eap) { |
| 551 | CHECK_FCT( fd_msg_avp_new ( cs->dict.EAP_Payload, 0, &avp ) ); |
| 552 | |
| 553 | /* o An empty RADIUS EAP-Message attribute (with length 2) signifies |
| 554 | EAP-Start, and it is translated to an empty EAP-Payload AVP. */ |
| 555 | if (got_empty_eap) { |
| 556 | value.os.len = 0; |
| 557 | value.os.data = (uint8_t *)""; |
| 558 | } else { |
| 559 | CHECK_MALLOC( value.os.data = radius_msg_get_eap(rad_req, &value.os.len) ); |
| 560 | } |
| 561 | |
| 562 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 563 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 564 | } |
| 565 | |
| 566 | /* Tunnel AVPs need some preparation */ |
| 567 | /* Convert the attributes one by one */ |
| 568 | for (idx = 0; idx < rad_req->attr_used; idx++) { |
| 569 | struct radius_attr_hdr * attr = (struct radius_attr_hdr *)(rad_req->buf + rad_req->attr_pos[idx]); |
| 570 | |
| 571 | switch (attr->type) { |
| 572 | |
| 573 | /* This macro converts a RADIUS attribute to a Diameter AVP of type OctetString */ |
| 574 | #define CONV2DIAM_STR( _dictobj_ ) \ |
| 575 | CHECK_PARAMS( attr->length >= sizeof(struct radius_attr_hdr) ); \ |
| 576 | /* Create the AVP with the specified dictionary model */ \ |
| 577 | CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| 578 | value.os.len = attr->length - sizeof(struct radius_attr_hdr); \ |
| 579 | value.os.data = (os0_t)(attr + 1); \ |
| 580 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| 581 | /* Add the AVP in the Diameter message. */ \ |
| 582 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| 583 | |
| 584 | /* Same thing, for scalar AVPs of 32 bits */ |
| 585 | #define CONV2DIAM_32B( _dictobj_ ) \ |
| 586 | CHECK_PARAMS( attr->length == sizeof(struct radius_attr_hdr)+sizeof(uint32_t) );\ |
| 587 | CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| 588 | { \ |
| 589 | uint8_t * v = (uint8_t *)(attr + 1); \ |
| 590 | value.u32 = (v[0] << 24) \ |
| 591 | | (v[1] << 16) \ |
| 592 | | (v[2] << 8) \ |
| 593 | | v[3] ; \ |
| 594 | } \ |
| 595 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| 596 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| 597 | |
| 598 | /* And the 64b version */ |
| 599 | #define CONV2DIAM_64B( _dictobj_ ) \ |
| 600 | CHECK_PARAMS( attr->length == sizeof(struct radius_attr_hdr)+sizeof(uint64_t) );\ |
| 601 | CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| 602 | { \ |
| 603 | uint8_t * v = (uint8_t *)(attr + 1); \ |
| 604 | value.u64 = ((uint64_t)(v[0]) << 56) \ |
| 605 | | ((uint64_t)(v[1]) << 48) \ |
| 606 | | ((uint64_t)(v[2]) << 40) \ |
| 607 | | ((uint64_t)(v[3]) << 32) \ |
| 608 | | ((uint64_t)(v[4]) << 24) \ |
| 609 | | ((uint64_t)(v[5]) << 16) \ |
| 610 | | ((uint64_t)(v[6]) << 8) \ |
| 611 | | (uint64_t)(v[7]) ; \ |
| 612 | } \ |
| 613 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| 614 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); \ |
| 615 | |
| 616 | /* RFC 2865 */ |
| 617 | /* |
| 618 | - The Destination-Realm AVP is created from the information found |
| 619 | in the RADIUS User-Name attribute. |
| 620 | -> done in rgw_clients_create_origin |
| 621 | */ |
| 622 | case RADIUS_ATTR_USER_NAME: |
| 623 | CONV2DIAM_STR( User_Name ); |
| 624 | break; |
| 625 | |
| 626 | /* |
| 627 | - If the RADIUS User-Password attribute is present, the password |
| 628 | must be unencrypted by using the link's RADIUS shared secret. |
| 629 | The unencrypted value must be forwarded in a User-Password AVP |
| 630 | using Diameter security. |
| 631 | */ |
| 632 | case RADIUS_ATTR_USER_PASSWORD: |
| 633 | if ((attr->length - 2) % 16) { |
| 634 | TRACE_DEBUG(INFO, "Invalid length of User-Password attribute: %hhd", attr->length); |
| 635 | return EINVAL; |
| 636 | } |
| 637 | { |
| 638 | /* Decipher following this logic (refers to rfc2865#section-5.2 ) |
| 639 | b1 = MD5(S + RA) p1 = c(1) xor b1 |
| 640 | b2 = MD5(S + c(1)) p2 = c(2) xor b2 |
| 641 | ... |
| 642 | */ |
| 643 | |
| 644 | uint8_t *ciph = (uint8_t *)(attr+1); /* c(i) */ |
| 645 | size_t ciph_len = attr->length - 2; |
| 646 | uint8_t deciph[128]; /* pi */ |
| 647 | size_t deciph_len = 0; |
| 648 | uint8_t * secret; /* S */ |
| 649 | size_t secret_len; |
| 650 | uint8_t hash[16]; /* b(i) */ |
| 651 | const uint8_t *addr[2]; |
| 652 | size_t len[2]; |
| 653 | |
| 654 | /* Retrieve the shared secret */ |
| 655 | CHECK_FCT(rgw_clients_getkey(cli, &secret, &secret_len)); |
| 656 | |
| 657 | /* Initial b1 = MD5(S + RA) */ |
| 658 | addr[0] = secret; |
| 659 | len[0] = secret_len; |
| 660 | addr[1] = rad_req->hdr->authenticator; |
| 661 | len[1] = 16; |
| 662 | md5_vector(2, addr, len, hash); |
| 663 | |
| 664 | /* loop */ |
| 665 | while (deciph_len < ciph_len) { |
| 666 | int i; |
| 667 | /* pi = c(i) xor bi */ |
| 668 | for (i = 0; i < 16; i++) |
| 669 | deciph[deciph_len + i] = ciph[deciph_len + i] ^ hash[i]; |
| 670 | /* do we have to remove the padding '\0's ? */ |
| 671 | |
| 672 | /* b(i+1) = MD5(S + c(i) */ |
| 673 | addr[1] = ciph + deciph_len; |
| 674 | md5_vector(2, addr, len, hash); |
| 675 | |
| 676 | deciph_len += 16; |
| 677 | } |
| 678 | |
| 679 | /* Now save this value in the AVP */ |
| 680 | CHECK_FCT( fd_msg_avp_new ( cs->dict.User_Password, 0, &avp ) ); |
| 681 | value.os.data = &deciph[0]; |
| 682 | value.os.len = deciph_len; |
| 683 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 684 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 685 | } |
| 686 | break; |
| 687 | |
| 688 | |
| 689 | /* |
| 690 | - If the RADIUS CHAP-Password attribute is present, the Ident and |
| 691 | Data portion of the attribute are used to create the CHAP-Auth |
| 692 | grouped AVP. |
| 693 | */ |
| 694 | case RADIUS_ATTR_CHAP_PASSWORD: |
| 695 | CHECK_PARAMS( attr->length == 19 /* RFC 2865 */); |
| 696 | { |
| 697 | uint8_t * c = (uint8_t *)(attr + 1); |
| 698 | struct avp * chap_auth; |
| 699 | CHECK_FCT( fd_msg_avp_new ( cs->dict.CHAP_Auth, 0, &chap_auth ) ); |
| 700 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, chap_auth) ); |
| 701 | |
| 702 | CHECK_FCT( fd_msg_avp_new ( cs->dict.CHAP_Algorithm, 0, &avp ) ); |
| 703 | value.u32 = 5; /* The only value defined currently... */ |
| 704 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 705 | CHECK_FCT( fd_msg_avp_add ( chap_auth, MSG_BRW_LAST_CHILD, avp) ); |
| 706 | |
| 707 | CHECK_FCT( fd_msg_avp_new ( cs->dict.CHAP_Ident, 0, &avp ) ); |
| 708 | value.os.data = c; |
| 709 | value.os.len = 1; |
| 710 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 711 | CHECK_FCT( fd_msg_avp_add ( chap_auth, MSG_BRW_LAST_CHILD, avp) ); |
| 712 | |
| 713 | c++; |
| 714 | |
| 715 | CHECK_FCT( fd_msg_avp_new ( cs->dict.CHAP_Response, 0, &avp ) ); |
| 716 | value.os.data = c; |
| 717 | value.os.len = attr->length - 3; |
| 718 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 719 | CHECK_FCT( fd_msg_avp_add ( chap_auth, MSG_BRW_LAST_CHILD, avp) ); |
| 720 | } |
| 721 | break; |
| 722 | |
| 723 | case RADIUS_ATTR_NAS_IP_ADDRESS: |
| 724 | CONV2DIAM_STR( NAS_IP_Address ); |
| 725 | break; |
| 726 | |
| 727 | case RADIUS_ATTR_NAS_PORT: |
| 728 | CONV2DIAM_32B( NAS_Port ); |
| 729 | break; |
| 730 | |
| 731 | case RADIUS_ATTR_SERVICE_TYPE: |
| 732 | CONV2DIAM_32B( Service_Type ); |
| 733 | break; |
| 734 | |
| 735 | case RADIUS_ATTR_FRAMED_PROTOCOL: |
| 736 | CONV2DIAM_32B( Framed_Protocol ); |
| 737 | break; |
| 738 | |
| 739 | case RADIUS_ATTR_FRAMED_IP_ADDRESS: |
| 740 | CONV2DIAM_STR( Framed_IP_Address ); |
| 741 | break; |
| 742 | |
| 743 | case RADIUS_ATTR_FRAMED_IP_NETMASK: |
| 744 | CONV2DIAM_STR( Framed_IP_Netmask ); |
| 745 | break; |
| 746 | |
| 747 | /* Framed-Routing never present in an Access-Request */ |
| 748 | /* Filter-Id never present in an Access-Request */ |
| 749 | |
| 750 | case RADIUS_ATTR_FRAMED_MTU: |
| 751 | CONV2DIAM_32B( Framed_MTU ); |
| 752 | break; |
| 753 | |
| 754 | case RADIUS_ATTR_FRAMED_COMPRESSION: |
| 755 | CONV2DIAM_32B( Framed_Compression ); |
| 756 | break; |
| 757 | |
| 758 | case RADIUS_ATTR_LOGIN_IP_HOST: |
| 759 | CONV2DIAM_STR( Login_IP_Host ); |
| 760 | break; |
| 761 | |
| 762 | /* Login-Service never present in an Access-Request */ |
| 763 | /* Login-TCP-Port never present in an Access-Request */ |
| 764 | /* Reply-Message never present in an Access-Request */ |
| 765 | |
| 766 | case RADIUS_ATTR_CALLBACK_NUMBER: |
| 767 | CONV2DIAM_STR( Callback_Number ); |
| 768 | break; |
| 769 | |
| 770 | /* Callback-Id never present in an Access-Request */ |
| 771 | /* Framed-Route never present in an Access-Request */ |
| 772 | /* Framed-IPX-Network never present in an Access-Request */ |
| 773 | |
| 774 | case RADIUS_ATTR_STATE: |
| 775 | CONV2DIAM_STR( State ); |
| 776 | break; |
| 777 | |
| 778 | /* Class never present in an Access-Request */ |
| 779 | |
| 780 | case RADIUS_ATTR_VENDOR_SPECIFIC: |
| 781 | /* RFC 4005, Section 9.6 : |
| 782 | Systems that don't have vendor format knowledge MAY discard such |
| 783 | attributes without knowing a suitable translation. |
| 784 | |
| 785 | [conversion rule in 9.6.2] |
| 786 | */ |
| 787 | if (attr->length >= 6) { |
| 788 | uint32_t vendor_id; |
| 789 | uint8_t * c = (uint8_t *)(attr + 1); |
| 790 | |
| 791 | vendor_id = c[0] << 24 | c[1] << 16 | c[2] << 8 | c[3]; |
| 792 | c += 4; |
| 793 | |
| 794 | switch (vendor_id) { |
| 795 | |
| 796 | /* For the vendors we KNOW they follow the VSA recommended format, we convert following the rules of RFC4005 (9.6.2) */ |
| 797 | case RADIUS_VENDOR_ID_MICROSOFT : /* RFC 2548 */ |
| 798 | /* other vendors ? */ |
| 799 | { |
| 800 | size_t left; |
| 801 | struct radius_attr_vendor *vtlv; |
| 802 | |
| 803 | left = attr->length - 6; |
| 804 | vtlv = (struct radius_attr_vendor *)c; |
| 805 | |
| 806 | while ((left >= 2) && (vtlv->vendor_length <= left)) { |
| 807 | /* Search our dictionary for corresponding Vendor's AVP */ |
| 808 | struct dict_avp_request req; |
| 809 | struct dict_object * avp_model = NULL; |
| 810 | memset(&req, 0, sizeof(struct dict_avp_request)); |
| 811 | req.avp_vendor = vendor_id; |
| 812 | req.avp_code = vtlv->vendor_type; |
| 813 | |
| 814 | CHECK_FCT( fd_dict_search( fd_g_config->cnf_dict, DICT_AVP, AVP_BY_CODE_AND_VENDOR, &req, &avp_model, 0) ); |
| 815 | if (!avp_model) { |
| 816 | TRACE_DEBUG(FULL, "Unknown attribute (vendor 0x%x, code 0x%x) ignored.", req.avp_vendor, req.avp_code); |
| 817 | } else { |
| 818 | CHECK_FCT( fd_msg_avp_new ( avp_model, 0, &avp ) ); |
| 819 | value.os.len = vtlv->vendor_length - 2; |
| 820 | value.os.data = (unsigned char *)(vtlv + 1); |
| 821 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); |
| 822 | CHECK_FCT( fd_msg_avp_add ( *diam_fw, MSG_BRW_LAST_CHILD, avp) ); |
| 823 | } |
| 824 | c += vtlv->vendor_length; |
| 825 | left -= vtlv->vendor_length; |
| 826 | vtlv = (struct radius_attr_vendor *)c; |
| 827 | } |
| 828 | } |
| 829 | break; |
| 830 | |
| 831 | /* Other vendors we KNOw how to convert the attributes would be added here... */ |
| 832 | /* case RADIUS_VENDOR_ID_CISCO : |
| 833 | break; */ |
| 834 | /* case RADIUS_VENDOR_ID_IETF : (extended RADIUS attributes) |
| 835 | break; */ |
| 836 | |
| 837 | /* When we don't know, just discard the attribute... VSA are optional with regards to RADIUS anyway */ |
| 838 | default: |
| 839 | /* do nothing */ |
| 840 | TRACE_DEBUG(FULL, "VSA attribute from vendor %d discarded", vendor_id); |
| 841 | |
| 842 | } |
| 843 | } |
| 844 | break; |
| 845 | |
| 846 | /* Session-Timeout never present in an Access-Request */ |
| 847 | /* Idle-Timeout never present in an Access-Request */ |
| 848 | /* Termination-Action never present in an Access-Request */ |
| 849 | |
| 850 | case RADIUS_ATTR_CALLED_STATION_ID: |
| 851 | CONV2DIAM_STR( Called_Station_Id ); |
| 852 | break; |
| 853 | |
| 854 | case RADIUS_ATTR_CALLING_STATION_ID: |
| 855 | CONV2DIAM_STR( Calling_Station_Id ); |
| 856 | break; |
| 857 | |
| 858 | case RADIUS_ATTR_NAS_IDENTIFIER: |
| 859 | CONV2DIAM_STR( NAS_Identifier ); |
| 860 | break; |
| 861 | |
| 862 | /* Proxy-State is handled by echo_drop.rgwx plugin, we ignore it here */ |
| 863 | |
| 864 | case RADIUS_ATTR_LOGIN_LAT_SERVICE: |
| 865 | CONV2DIAM_STR( Login_LAT_Service ); |
| 866 | break; |
| 867 | |
| 868 | case RADIUS_ATTR_LOGIN_LAT_NODE: |
| 869 | CONV2DIAM_STR( Login_LAT_Node ); |
| 870 | break; |
| 871 | |
| 872 | case RADIUS_ATTR_LOGIN_LAT_GROUP: |
| 873 | CONV2DIAM_STR( Login_LAT_Group ); |
| 874 | break; |
| 875 | |
| 876 | /* Framed-AppleTalk-Link never present in an Access-Request */ |
| 877 | /* Framed-AppleTalk-Network never present in an Access-Request */ |
| 878 | /* Framed-AppleTalk-Zone never present in an Access-Request */ |
| 879 | |
| 880 | case RADIUS_ATTR_CHAP_CHALLENGE: |
| 881 | CONV2DIAM_STR( CHAP_Challenge ); |
| 882 | break; |
| 883 | |
| 884 | case RADIUS_ATTR_NAS_PORT_TYPE: |
| 885 | CONV2DIAM_32B( NAS_Port_Type ); |
| 886 | break; |
| 887 | |
| 888 | case RADIUS_ATTR_PORT_LIMIT: |
| 889 | CONV2DIAM_32B( Port_Limit ); |
| 890 | break; |
| 891 | |
| 892 | case RADIUS_ATTR_LOGIN_LAT_PORT: |
| 893 | CONV2DIAM_STR( Login_LAT_Port ); |
| 894 | break; |
| 895 | |
| 896 | |
| 897 | /* RFC 3162 */ |
| 898 | case RADIUS_ATTR_NAS_IPV6_ADDRESS: |
| 899 | CONV2DIAM_STR( NAS_IPv6_Address ); |
| 900 | break; |
| 901 | |
| 902 | case RADIUS_ATTR_FRAMED_INTERFACE_ID: |
| 903 | CONV2DIAM_64B( Framed_Interface_Id ); |
| 904 | break; |
| 905 | |
| 906 | case RADIUS_ATTR_FRAMED_IPV6_PREFIX: |
| 907 | CONV2DIAM_STR( Framed_IPv6_Prefix ); |
| 908 | break; |
| 909 | |
| 910 | case RADIUS_ATTR_LOGIN_IPV6_HOST: |
| 911 | CONV2DIAM_STR( Login_IPv6_Host ); |
| 912 | break; |
| 913 | |
| 914 | /* Framed-IPv6-Route never present in an Access-Request */ |
| 915 | /* Framed-IPv6-Pool never present in an Access-Request */ |
| 916 | |
| 917 | |
| 918 | /* RFC 2868 */ |
| 919 | /* Prepare the top-level Tunneling AVP for each tag values, as needed, and add to the Diameter message. |
| 920 | This macro is called when an AVP is added inside the group, so we will not have empty grouped AVPs */ |
| 921 | #define AVP_TUN_PREPARE() { \ |
| 922 | if (avp_tun == NULL) { \ |
| 923 | CHECK_MALLOC( avp_tun = calloc(sizeof(struct avp *), 32 ) ); \ |
| 924 | } \ |
| 925 | tag = *(uint8_t *)(attr + 1); \ |
| 926 | if (tag > 0x1F) tag = 0; \ |
| 927 | if (avp_tun[tag] == NULL) { \ |
| 928 | CHECK_FCT( fd_msg_avp_new ( cs->dict.Tunneling, 0, &avp_tun[tag] ) ); \ |
| 929 | CHECK_FCT( fd_msg_avp_add (*diam_fw, MSG_BRW_LAST_CHILD, avp_tun[tag]));\ |
| 930 | } \ |
| 931 | } |
| 932 | |
| 933 | /* Convert an attribute to an OctetString AVP and add inside the Tunneling AVP corresponding to the tag */ |
| 934 | #define CONV2DIAM_TUN_STR( _dictobj_ ) { \ |
| 935 | uint8_t tag; \ |
| 936 | CHECK_PARAMS( attr->length >= 3); \ |
| 937 | AVP_TUN_PREPARE(); \ |
| 938 | CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| 939 | value.os.len = attr->length - (tag ? 3 : 2); \ |
| 940 | value.os.data = ((unsigned char *)(attr + 1)) + (tag ? 1 : 0); \ |
| 941 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| 942 | CHECK_FCT( fd_msg_avp_add ( avp_tun[tag], MSG_BRW_LAST_CHILD, avp) ); \ |
| 943 | } |
| 944 | |
| 945 | /* Convert an attribute to a scalar AVP and add inside the Tunneling AVP corresponding to the tag */ |
| 946 | #define CONV2DIAM_TUN_24B( _dictobj_ ) { \ |
| 947 | uint8_t tag; \ |
| 948 | CHECK_PARAMS( attr->length == 6); \ |
| 949 | AVP_TUN_PREPARE(); \ |
| 950 | CHECK_FCT( fd_msg_avp_new ( cs->dict._dictobj_, 0, &avp ) ); \ |
| 951 | { \ |
| 952 | uint8_t * v = (uint8_t *)(attr + 1); \ |
| 953 | value.u32 = (v[1] << 16) | (v[2] <<8) | v[3] ; \ |
| 954 | } \ |
| 955 | CHECK_FCT( fd_msg_avp_setvalue ( avp, &value ) ); \ |
| 956 | CHECK_FCT( fd_msg_avp_add ( avp_tun[tag], MSG_BRW_LAST_CHILD, avp) ); \ |
| 957 | } |
| 958 | |
| 959 | /* |
| 960 | - If the RADIUS message contains Tunnel information [RADTunnels], |
| 961 | the attributes or tagged groups should each be converted to a |
| 962 | Diameter Tunneling Grouped AVP set. If the tunnel information |
| 963 | contains a Tunnel-Password attribute, the RADIUS encryption |
| 964 | must be resolved, and the password forwarded, by using Diameter |
| 965 | security methods. |
| 966 | -> If the RADIUS message does not use properly the Tag info, result is unpredictable here.. |
| 967 | */ |
| 968 | case RADIUS_ATTR_TUNNEL_TYPE: |
| 969 | CONV2DIAM_TUN_24B( Tunnel_Type ); |
| 970 | break; |
| 971 | |
| 972 | case RADIUS_ATTR_TUNNEL_MEDIUM_TYPE: |
| 973 | CONV2DIAM_TUN_24B( Tunnel_Medium_Type ); |
| 974 | break; |
| 975 | |
| 976 | case RADIUS_ATTR_TUNNEL_CLIENT_ENDPOINT: |
| 977 | CONV2DIAM_TUN_STR( Tunnel_Client_Endpoint ); |
| 978 | break; |
| 979 | |
| 980 | case RADIUS_ATTR_TUNNEL_SERVER_ENDPOINT: |
| 981 | CONV2DIAM_TUN_STR( Tunnel_Server_Endpoint ); |
| 982 | break; |
| 983 | |
| 984 | /* Tunnel-Password never present in an Access-Request */ |
| 985 | |
| 986 | case RADIUS_ATTR_TUNNEL_PRIVATE_GROUP_ID: |
| 987 | CONV2DIAM_TUN_STR( Tunnel_Private_Group_Id ); |
| 988 | break; |
| 989 | |
| 990 | /* Tunnel-Assignment-ID never present in an Access-Request */ |
| 991 | |
| 992 | case RADIUS_ATTR_TUNNEL_PREFERENCE: |
| 993 | CONV2DIAM_TUN_24B( Tunnel_Preference ); |
| 994 | break; |
| 995 | |
| 996 | case RADIUS_ATTR_TUNNEL_CLIENT_AUTH_ID: |
| 997 | CONV2DIAM_TUN_STR( Tunnel_Client_Auth_Id ); |
| 998 | break; |
| 999 | |
| 1000 | case RADIUS_ATTR_TUNNEL_SERVER_AUTH_ID: |
| 1001 | CONV2DIAM_TUN_STR( Tunnel_Server_Auth_Id ); |
| 1002 | break; |
| 1003 | |
| 1004 | |
| 1005 | /* RFC 2869 */ |
| 1006 | case RADIUS_ATTR_ARAP_PASSWORD: |
| 1007 | CONV2DIAM_STR( ARAP_Password ); |
| 1008 | break; |
| 1009 | |
| 1010 | /* ARAP-Features never present in an Access-Request */ |
| 1011 | /* ARAP-Zone-Access never present in an Access-Request */ |
| 1012 | |
| 1013 | case RADIUS_ATTR_ARAP_SECURITY: |
| 1014 | CONV2DIAM_32B( ARAP_Security ); |
| 1015 | break; |
| 1016 | |
| 1017 | case RADIUS_ATTR_ARAP_SECURITY_DATA: |
| 1018 | CONV2DIAM_STR( ARAP_Security_Data ); |
| 1019 | break; |
| 1020 | |
| 1021 | /* Password-Retry never present in an Access-Request */ |
| 1022 | /* Prompt never present in an Access-Request */ |
| 1023 | |
| 1024 | case RADIUS_ATTR_CONNECT_INFO: |
| 1025 | CONV2DIAM_STR( Connect_Info ); |
| 1026 | break; |
| 1027 | |
| 1028 | /* Configuration-Token never present in an Access-Request */ |
| 1029 | /* ARAP-Challenge-Response never present in an Access-Request */ |
| 1030 | /* Acct-Interim-Interval never present in an Access-Request */ |
| 1031 | |
| 1032 | case RADIUS_ATTR_NAS_PORT_ID: |
| 1033 | CONV2DIAM_STR( NAS_Port_Id ); |
| 1034 | break; |
| 1035 | |
| 1036 | /* Framed-Pool never present in an Access-Request */ |
| 1037 | |
| 1038 | |
| 1039 | /* RFC 2869 / 3579 */ |
| 1040 | case RADIUS_ATTR_ORIGINATING_LINE_INFO: |
| 1041 | CONV2DIAM_STR( Originating_Line_Info ); |
| 1042 | break; |
| 1043 | |
| 1044 | case RADIUS_ATTR_MESSAGE_AUTHENTICATOR: |
| 1045 | case RADIUS_ATTR_EAP_MESSAGE: |
| 1046 | /* It was already handled, just remove the attribute */ |
| 1047 | break; |
| 1048 | |
| 1049 | /* Default */ |
| 1050 | default: /* unknown attribute */ |
| 1051 | /* We just keep the attribute in the RADIUS message */ |
| 1052 | rad_req->attr_pos[nattr_used++] = rad_req->attr_pos[idx]; |
| 1053 | } |
| 1054 | } |
| 1055 | |
| 1056 | /* Destroy tunnel pointers (if we used it) */ |
| 1057 | free(avp_tun); |
| 1058 | |
| 1059 | /* Update the radius message to remove all handled attributes */ |
| 1060 | rad_req->attr_used = nattr_used; |
| 1061 | |
| 1062 | /* Store the request identifier in the session (if provided) */ |
| 1063 | { |
| 1064 | struct sess_state *st; |
| 1065 | CHECK_MALLOC(st = malloc(sizeof(struct sess_state))); |
| 1066 | memcpy(st->req_auth, &rad_req->hdr->authenticator[0], 16); |
| 1067 | |
| 1068 | CHECK_FCT( fd_sess_state_store( cs->sess_hdl, sess, &st ) ); |
| 1069 | } |
| 1070 | |
| 1071 | return 0; |
| 1072 | } |
| 1073 | |
| 1074 | static int auth_diam_ans( struct rgwp_config * cs, struct msg ** diam_ans, struct radius_msg ** rad_fw, struct rgw_client * cli ) |
| 1075 | { |
| 1076 | struct msg_hdr * hdr; |
| 1077 | struct avp *avp, *next, *avp_x, *avp_y, *aoh; |
| 1078 | struct avp_hdr *ahdr, *oh; |
| 1079 | uint8_t buf[254]; /* to store some attributes values (with final '\0') */ |
| 1080 | size_t sz; |
| 1081 | int ta_set = 0; |
| 1082 | int no_str = 0; /* indicate if an STR is required for this server */ |
| 1083 | uint8_t tuntag = 0; |
| 1084 | struct sess_state *st; |
| 1085 | int error_cause = 0; |
| 1086 | struct session * sess; |
| 1087 | os0_t sid = NULL; |
| 1088 | size_t sidlen; |
| 1089 | |
| 1090 | TRACE_ENTRY("%p %p %p %p", cs, diam_ans, rad_fw, cli); |
| 1091 | CHECK_PARAMS(cs && diam_ans && *diam_ans && rad_fw && *rad_fw); |
| 1092 | |
| 1093 | /* Retrieve the request identified which was stored in the session */ |
| 1094 | CHECK_FCT( fd_msg_sess_get(fd_g_config->cnf_dict, *diam_ans, &sess, NULL) ); |
| 1095 | if (sess) { |
| 1096 | CHECK_FCT( fd_sess_state_retrieve( cs->sess_hdl, sess, &st ) ); |
| 1097 | CHECK_FCT( fd_sess_getsid(sess, &sid, &sidlen) ); |
| 1098 | } /* else ? */ |
| 1099 | |
| 1100 | /* |
| 1101 | - If the Diameter Command-Code is set to AA-Answer and the |
| 1102 | Result-Code AVP is set to DIAMETER_MULTI_ROUND_AUTH, the |
| 1103 | gateway must send a RADIUS Access-Challenge. This must have |
| 1104 | the Origin-Host, Origin-Realm, and Diameter Session-Id AVPs |
| 1105 | encapsulated in the RADIUS State attribute, with the prefix |
| 1106 | "Diameter/", concatenated in the above order separated with "/" |
| 1107 | characters, in UTF-8 [UTF-8]. This is necessary to ensure that |
| 1108 | the Translation Agent receiving the subsequent RADIUS Access- |
| 1109 | Request will have access to the Session Identifier and be able |
| 1110 | to set the Destination-Host to the correct value. |
| 1111 | -> done here below |
| 1112 | |
| 1113 | - If the Command-Code is set to AA-Answer, the Diameter Session- |
| 1114 | Id AVP is saved in a new RADIUS Class attribute whose format |
| 1115 | consists of the string "Diameter/" followed by the Diameter |
| 1116 | Session Identifier. This will ensure that the subsequent |
| 1117 | Accounting messages, which could be received by any Translation |
| 1118 | Agent, would have access to the original Diameter Session |
| 1119 | Identifier. |
| 1120 | -> done here but only for Access-Accept messages (Result-Code = success) |
| 1121 | */ |
| 1122 | |
| 1123 | /* MACROS to help in the process: convert AVP data to RADIUS attributes. */ |
| 1124 | /* Control large attributes: _trunc_ = 0 => error; _trunc_ = 1 => truncate; _trunc = 2 => create several attributes */ |
| 1125 | #define CONV2RAD_STR( _attr_, _data_, _len_, _trunc_) { \ |
| 1126 | size_t __l = (size_t)(_len_); \ |
| 1127 | size_t __off = 0; \ |
| 1128 | TRACE_DEBUG(FULL, "Converting AVP to "#_attr_); \ |
| 1129 | if ((_trunc_) == 0) { \ |
| 1130 | CHECK_PARAMS( __l <= 253 ); \ |
| 1131 | } \ |
| 1132 | if ((__l > 253) && (_trunc_ == 1)) { \ |
| 1133 | TRACE_DEBUG(INFO, "[auth.rgwx] AVP truncated in "#_attr_); \ |
| 1134 | __l = 253; \ |
| 1135 | } \ |
| 1136 | do { \ |
| 1137 | size_t __w = (__l > 253) ? 253 : __l; \ |
| 1138 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), (_data_) + __off, __w)); \ |
| 1139 | __off += __w; \ |
| 1140 | __l -= __w; \ |
| 1141 | } while (__l); \ |
| 1142 | } |
| 1143 | |
| 1144 | #define CONV2RAD_32B( _attr_, _data_) { \ |
| 1145 | uint32_t __v = htonl((uint32_t)(_data_)); \ |
| 1146 | TRACE_DEBUG(FULL, "Converting AVP to "#_attr_); \ |
| 1147 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), (uint8_t *)&__v, sizeof(__v))); \ |
| 1148 | } |
| 1149 | |
| 1150 | #define CONV2RAD_64B( _attr_, _data_) { \ |
| 1151 | uint64_t __v = htonll((uint64_t)(_data_)); \ |
| 1152 | TRACE_DEBUG(FULL, "Converting AVP to "#_attr_); \ |
| 1153 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), (uint8_t *)&__v, sizeof(__v))); \ |
| 1154 | } |
| 1155 | |
| 1156 | /* Search the different AVPs we handle here */ |
| 1157 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Origin_Host, &aoh) ); |
| 1158 | CHECK_FCT( fd_msg_avp_hdr ( aoh, &oh ) ); |
| 1159 | |
| 1160 | /* Check the Diameter error code */ |
| 1161 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Result_Code, &avp) ); |
| 1162 | ASSERT( avp ); /* otherwise the message should have been discarded a lot earlier because of ABNF */ |
| 1163 | CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| 1164 | switch (ahdr->avp_value->u32) { |
| 1165 | case ER_DIAMETER_MULTI_ROUND_AUTH: |
| 1166 | (*rad_fw)->hdr->code = RADIUS_CODE_ACCESS_CHALLENGE; |
| 1167 | break; |
| 1168 | case ER_DIAMETER_SUCCESS: |
| 1169 | case ER_DIAMETER_LIMITED_SUCCESS: |
| 1170 | (*rad_fw)->hdr->code = RADIUS_CODE_ACCESS_ACCEPT; |
| 1171 | break; |
| 1172 | |
| 1173 | default: |
| 1174 | /* Can we convert the value to a natural Error-Cause ? */ |
| 1175 | switch (ahdr->avp_value->u32) { |
| 1176 | case ER_DIAMETER_AVP_UNSUPPORTED: |
| 1177 | error_cause = 401; /* Unsupported Attribute */ |
| 1178 | break; |
| 1179 | |
| 1180 | case ER_DIAMETER_MISSING_AVP: |
| 1181 | error_cause = 402; /* Missing Attribute */ |
| 1182 | break; |
| 1183 | |
| 1184 | case ER_DIAMETER_UNABLE_TO_COMPLY: |
| 1185 | error_cause = 404; /* Invalid Request */ |
| 1186 | break; |
| 1187 | |
| 1188 | case ER_DIAMETER_APPLICATION_UNSUPPORTED: |
| 1189 | error_cause = 405; /* Unsupported Service */ |
| 1190 | break; |
| 1191 | |
| 1192 | case ER_DIAMETER_COMMAND_UNSUPPORTED: |
| 1193 | error_cause = 406; /* Unsupported Extension */ |
| 1194 | break; |
| 1195 | |
| 1196 | case ER_DIAMETER_INVALID_AVP_VALUE: |
| 1197 | error_cause = 407; /* Invalid Attribute Value */ |
| 1198 | break; |
| 1199 | |
| 1200 | case ER_DIAMETER_AVP_NOT_ALLOWED: |
| 1201 | error_cause = 501; /* Administratively Prohibited */ |
| 1202 | break; |
| 1203 | |
| 1204 | case ER_DIAMETER_REALM_NOT_SERVED: |
| 1205 | case ER_DIAMETER_LOOP_DETECTED: |
| 1206 | case ER_DIAMETER_UNKNOWN_PEER: |
| 1207 | case ER_DIAMETER_UNABLE_TO_DELIVER: |
| 1208 | error_cause = 502; /* Request Not Routable (Proxy) */ |
| 1209 | break; |
| 1210 | |
| 1211 | case ER_DIAMETER_UNKNOWN_SESSION_ID: |
| 1212 | error_cause = 503; /* Session Context Not Found */ |
| 1213 | break; |
| 1214 | |
| 1215 | case ER_DIAMETER_TOO_BUSY: |
| 1216 | case ER_DIAMETER_OUT_OF_SPACE: |
| 1217 | error_cause = 506; /* Resources Unavailable */ |
| 1218 | break; |
| 1219 | |
| 1220 | #if 0 |
| 1221 | /* remaining Diameter Result-Code & RADIUS Error-Cause */ |
| 1222 | case ER_DIAMETER_REDIRECT_INDICATION: |
| 1223 | case ER_DIAMETER_INVALID_HDR_BITS: |
| 1224 | case ER_DIAMETER_INVALID_AVP_BITS: |
| 1225 | case ER_DIAMETER_AUTHENTICATION_REJECTED: |
| 1226 | case ER_ELECTION_LOST: |
| 1227 | case ER_DIAMETER_AUTHORIZATION_REJECTED: |
| 1228 | case ER_DIAMETER_RESOURCES_EXCEEDED: |
| 1229 | case ER_DIAMETER_CONTRADICTING_AVPS: |
| 1230 | case ER_DIAMETER_AVP_OCCURS_TOO_MANY_TIMES |
| 1231 | case ER_DIAMETER_NO_COMMON_APPLICATION: |
| 1232 | case ER_DIAMETER_UNSUPPORTED_VERSION: |
| 1233 | case ER_DIAMETER_INVALID_BIT_IN_HEADER: |
| 1234 | case ER_DIAMETER_INVALID_AVP_LENGTH: |
| 1235 | case ER_DIAMETER_INVALID_MESSAGE_LENGTH: |
| 1236 | case ER_DIAMETER_INVALID_AVP_BIT_COMBO: |
| 1237 | case ER_DIAMETER_NO_COMMON_SECURITY: |
| 1238 | error_cause = 403; /* NAS Identification Mismatch */ |
| 1239 | error_cause = 504; /* Session Context Not Removable */ |
| 1240 | error_cause = 505; /* Other Proxy Processing Error */ |
| 1241 | error_cause = 507; /* Request Initiated */ |
| 1242 | error_cause = 508; /* Multiple Session Selection Unsupported */ |
| 1243 | #endif /* 0 */ |
| 1244 | } |
| 1245 | /* In any case, the following is processed: */ |
| 1246 | (*rad_fw)->hdr->code = RADIUS_CODE_ACCESS_REJECT; |
| 1247 | fd_log_debug("[auth.rgwx] Received Diameter answer with error code '%d' from server '%.*s', session %.*s, translating into Access-Reject", |
| 1248 | ahdr->avp_value->u32, |
| 1249 | (int)oh->avp_value->os.len, oh->avp_value->os.data, |
| 1250 | (int)sidlen, sid); |
| 1251 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Error_Message, &avp_x) ); |
| 1252 | if (avp_x) { |
| 1253 | CHECK_FCT( fd_msg_avp_hdr ( avp_x, &ahdr ) ); |
| 1254 | fd_log_debug("[auth.rgwx] Error-Message content: '%.*s'", |
| 1255 | (int)ahdr->avp_value->os.len, ahdr->avp_value->os.data); |
| 1256 | } |
| 1257 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Error_Reporting_Host, &avp_x) ); |
| 1258 | if (avp_x) { |
| 1259 | CHECK_FCT( fd_msg_avp_hdr ( avp_x, &ahdr ) ); |
| 1260 | fd_log_debug("[auth.rgwx] Error-Reporting-Host: '%.*s'", |
| 1261 | (int)ahdr->avp_value->os.len, ahdr->avp_value->os.data); |
| 1262 | } |
| 1263 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Failed_AVP, &avp_x) ); |
| 1264 | if (avp_x) { |
| 1265 | fd_log_debug("[auth.rgwx] Failed-AVP was included in the message."); |
| 1266 | /* Dump its content ? */ |
| 1267 | } |
| 1268 | } |
| 1269 | /* Remove this Result-Code avp */ |
| 1270 | CHECK_FCT( fd_msg_free( avp ) ); |
| 1271 | |
| 1272 | /* Creation of the State or Class attribute with session information */ |
| 1273 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Origin_Realm, &avp) ); |
| 1274 | CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| 1275 | |
| 1276 | /* Now, save the session-id and eventually server info in a STATE or CLASS attribute */ |
| 1277 | if ((*rad_fw)->hdr->code == RADIUS_CODE_ACCESS_CHALLENGE) { |
| 1278 | if (sizeof(buf) < (sz = snprintf((char *)buf, sizeof(buf), "Diameter/%.*s/%.*s/%.*s", |
| 1279 | (int)oh->avp_value->os.len, (char *)oh->avp_value->os.data, |
| 1280 | (int)ahdr->avp_value->os.len, (char *)ahdr->avp_value->os.data, |
| 1281 | (int)sidlen, (char *)sid))) { |
| 1282 | TRACE_DEBUG(INFO, "Data truncated in State attribute: %s", buf); |
| 1283 | } |
| 1284 | CONV2RAD_STR(RADIUS_ATTR_STATE, buf, sz, 0); |
| 1285 | } |
| 1286 | |
| 1287 | if ((*rad_fw)->hdr->code == RADIUS_CODE_ACCESS_ACCEPT) { |
| 1288 | /* Add the Session-Id */ |
| 1289 | if (sizeof(buf) < (sz = snprintf((char *)buf, sizeof(buf), "Diameter/%.*s", |
| 1290 | (int)sidlen, sid))) { |
| 1291 | TRACE_DEBUG(INFO, "Data truncated in Class attribute: %s", buf); |
| 1292 | } |
| 1293 | CONV2RAD_STR(RADIUS_ATTR_CLASS, buf, sz, 0); |
| 1294 | } |
| 1295 | |
| 1296 | /* Unlink the Origin-Realm now; the others are unlinked at the end of this function */ |
| 1297 | CHECK_FCT( fd_msg_free( avp ) ); |
| 1298 | |
| 1299 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Session_Timeout, &avp) ); |
| 1300 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Authorization_Lifetime, &avp_x) ); |
| 1301 | CHECK_FCT( fd_msg_search_avp (*diam_ans, cs->dict.Re_Auth_Request_Type, &avp_y) ); |
| 1302 | /* |
| 1303 | When translating a Diameter AA-Answer (with successful result code) |
| 1304 | to RADIUS Access-Accept that contains a Session-Timeout or |
| 1305 | Authorization-Lifetime AVP, take the following steps: |
| 1306 | |
| 1307 | - If the Diameter message contains a Session-Timeout AVP but no |
| 1308 | Authorization-Lifetime AVP, translate it to a Session-Timeout |
| 1309 | attribute (not a Termination-Action). |
| 1310 | */ |
| 1311 | if ((avp != NULL) && (avp_x == NULL)) { |
| 1312 | CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| 1313 | CONV2RAD_32B( RADIUS_ATTR_SESSION_TIMEOUT, ahdr->avp_value->u32 ); |
| 1314 | } |
| 1315 | |
| 1316 | /* |
| 1317 | - If the Diameter message contains an Authorization-Lifetime AVP |
| 1318 | but no Session-Timeout AVP, translate it to a Session-Timeout |
| 1319 | attribute and a Termination-Action set to AA-REQUEST. (Remove |
| 1320 | Authorization-Lifetime and Re-Auth-Request-Type.) |
| 1321 | */ |
| 1322 | if ((avp == NULL) && (avp_x != NULL)) { |
| 1323 | CHECK_FCT( fd_msg_avp_hdr ( avp_x, &ahdr ) ); |
| 1324 | CONV2RAD_32B( RADIUS_ATTR_SESSION_TIMEOUT, ahdr->avp_value->u32 ); |
| 1325 | CONV2RAD_32B( RADIUS_ATTR_TERMINATION_ACTION, RADIUS_TERMINATION_ACTION_RADIUS_REQUEST ); |
| 1326 | ta_set = 1; |
| 1327 | } |
| 1328 | |
| 1329 | /* |
| 1330 | - If the Diameter message has both, the Session-Timeout must be |
| 1331 | greater than or equal to the Authorization-Lifetime (required |
| 1332 | by [BASE]). Translate it to a Session-Timeout value (with |
| 1333 | value from Authorization-Lifetime AVP, the smaller one) and |
| 1334 | with the Termination-Action set to AA-REQUEST. (Remove the |
| 1335 | Authorization-Lifetime and Re-Auth-Request-Type.) |
| 1336 | */ |
| 1337 | if ((avp != NULL) && (avp_x != NULL)) { |
| 1338 | CHECK_FCT( fd_msg_avp_hdr ( avp_x, &ahdr ) ); |
| 1339 | CONV2RAD_32B( RADIUS_ATTR_SESSION_TIMEOUT, ahdr->avp_value->u32 ); |
| 1340 | CONV2RAD_32B( RADIUS_ATTR_TERMINATION_ACTION, RADIUS_TERMINATION_ACTION_RADIUS_REQUEST ); |
| 1341 | ta_set = 1; |
| 1342 | } |
| 1343 | |
| 1344 | /* -> Not too sure about Auth-Grace-Period... we'll just discard it for now */ |
| 1345 | |
| 1346 | if (avp) { |
| 1347 | CHECK_FCT( fd_msg_free( avp ) ); |
| 1348 | } |
| 1349 | if (avp_x) { |
| 1350 | CHECK_FCT( fd_msg_free( avp_x ) ); |
| 1351 | } |
| 1352 | if (avp_y) { |
| 1353 | CHECK_FCT( fd_msg_free( avp_y ) ); |
| 1354 | } |
| 1355 | |
| 1356 | |
| 1357 | /* |
| 1358 | - If a Proxy-State attribute was present in the RADIUS request, |
| 1359 | the same attribute is added in the response. This information |
| 1360 | may be found in the Proxy-Info AVP group, or in a local state |
| 1361 | table. |
| 1362 | -> handled by sub_echo_drop |
| 1363 | |
| 1364 | - If state information regarding the RADIUS request was saved in |
| 1365 | a Proxy-Info AVP or local state table, the RADIUS Identifier |
| 1366 | and UDP IP Address and port number are extracted and used in |
| 1367 | issuing the RADIUS reply. |
| 1368 | -> was saved with the full request |
| 1369 | */ |
| 1370 | |
| 1371 | |
| 1372 | /* Now loop in the list of AVPs and convert those that we know how */ |
| 1373 | CHECK_FCT( fd_msg_browse(*diam_ans, MSG_BRW_FIRST_CHILD, &next, NULL) ); |
| 1374 | |
| 1375 | while (next) { |
| 1376 | int handled = 1; |
| 1377 | avp = next; |
| 1378 | CHECK_FCT( fd_msg_browse(avp, MSG_BRW_NEXT, &next, NULL) ); |
| 1379 | |
| 1380 | CHECK_FCT( fd_msg_avp_hdr ( avp, &ahdr ) ); |
| 1381 | |
| 1382 | if (!(ahdr->avp_flags & AVP_FLAG_VENDOR)) { |
| 1383 | switch (ahdr->avp_code) { |
| 1384 | /* In case of Diameter error, include the Reply-Message attribute */ |
| 1385 | case DIAM_ATTR_ERROR_MESSAGE: |
| 1386 | CONV2RAD_STR(RADIUS_ATTR_REPLY_MESSAGE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1387 | break; |
| 1388 | |
| 1389 | case DIAM_ATTR_ERROR_REPORTING_HOST: |
| 1390 | { |
| 1391 | char buf[254]; |
| 1392 | int bsz = snprintf(buf, sizeof(buf), "Error-Reporting-Host: %*s", (int)(ahdr->avp_value->os.len), ahdr->avp_value->os.data); |
| 1393 | CONV2RAD_STR(RADIUS_ATTR_REPLY_MESSAGE, (uint8_t *)buf, bsz, 2); |
| 1394 | } |
| 1395 | break; |
| 1396 | |
| 1397 | case DIAM_ATTR_FAILED_AVP: |
| 1398 | { |
| 1399 | struct avp * favp; |
| 1400 | CHECK_FCT( fd_msg_browse(avp, MSG_BRW_FIRST_CHILD, &favp, NULL) ); |
| 1401 | if (favp) { |
| 1402 | char buf[254]; |
| 1403 | int bsz; |
| 1404 | struct dict_object * favp_model; |
| 1405 | |
| 1406 | CHECK_FCT( fd_msg_model(favp, &favp_model) ); |
| 1407 | if (favp_model) { |
| 1408 | struct dict_avp_data fadata; |
| 1409 | CHECK_FCT( fd_dict_getval(favp_model, &fadata) ); |
| 1410 | bsz = snprintf(buf, sizeof(buf), "Failed-AVP: %s", fadata.avp_name); |
| 1411 | } else { |
| 1412 | struct avp_hdr * favp_hdr; |
| 1413 | CHECK_FCT( fd_msg_avp_hdr ( favp, &favp_hdr ) ); |
| 1414 | bsz = snprintf(buf, sizeof(buf), "Failed-AVP: code %u, vendor %u", favp_hdr->avp_code, favp_hdr->avp_vendor); |
| 1415 | } |
| 1416 | CONV2RAD_STR(RADIUS_ATTR_REPLY_MESSAGE, (uint8_t *)buf, bsz, 2); |
| 1417 | } |
| 1418 | } |
| 1419 | break; |
| 1420 | |
| 1421 | /* RFC 4005 (AVP in the order of the AA-Request/Answer AVP Table) */ |
| 1422 | case DIAM_ATTR_ACCT_INTERIM_INTERVAL: |
| 1423 | CONV2RAD_32B(RADIUS_ATTR_ACCT_INTERIM_INTERVAL, ahdr->avp_value->u32); |
| 1424 | break; |
| 1425 | |
| 1426 | case DIAM_ATTR_ARAP_CHALLENGE_RESPONSE: |
| 1427 | CONV2RAD_STR(RADIUS_ATTR_ARAP_CHALLENGE_RESPONSE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1428 | break; |
| 1429 | |
| 1430 | case DIAM_ATTR_ARAP_FEATURES: |
| 1431 | CONV2RAD_STR(RADIUS_ATTR_ARAP_FEATURES, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1432 | break; |
| 1433 | |
| 1434 | /* ARAP-Password is not present in answers */ |
| 1435 | |
| 1436 | case DIAM_ATTR_ARAP_SECURITY: |
| 1437 | CONV2RAD_32B(RADIUS_ATTR_ARAP_SECURITY, ahdr->avp_value->u32); |
| 1438 | break; |
| 1439 | |
| 1440 | case DIAM_ATTR_ARAP_SECURITY_DATA: |
| 1441 | CONV2RAD_STR(RADIUS_ATTR_ARAP_SECURITY_DATA, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1442 | break; |
| 1443 | |
| 1444 | case DIAM_ATTR_ARAP_ZONE_ACCESS: |
| 1445 | CONV2RAD_32B(RADIUS_ATTR_ARAP_ZONE_ACCESS, ahdr->avp_value->u32); |
| 1446 | break; |
| 1447 | |
| 1448 | case DIAM_ATTR_AUTH_APPLICATION_ID: |
| 1449 | /* We just remove this AVP */ |
| 1450 | break; |
| 1451 | |
| 1452 | case DIAM_ATTR_AUTH_GRACE_PERIOD: |
| 1453 | /* We just remove this AVP (?) */ |
| 1454 | break; |
| 1455 | |
| 1456 | case DIAM_ATTR_AUTH_REQUEST_TYPE: |
| 1457 | /* We only check the value */ |
| 1458 | if (ahdr->avp_value->u32 != 3) { |
| 1459 | fd_log_debug("[auth.rgwx] Received Diameter answer with Auth-Request-Type set to %d (%s) from server %.*s, session %.*s." |
| 1460 | " This may cause interoperability problems with RADIUS.", |
| 1461 | ahdr->avp_value->u32, |
| 1462 | (ahdr->avp_value->u32 == 1) ? "AUTHENTICATE_ONLY" : |
| 1463 | ((ahdr->avp_value->u32 == 2) ? "AUTHORIZE_ONLY" : "???"), |
| 1464 | (int)oh->avp_value->os.len, oh->avp_value->os.data, |
| 1465 | (int)sidlen, sid); |
| 1466 | } |
| 1467 | break; |
| 1468 | |
| 1469 | case DIAM_ATTR_AUTH_SESSION_STATE: |
| 1470 | if ((!ta_set) && (ahdr->avp_value->u32 == ACV_ASS_STATE_MAINTAINED)) { |
| 1471 | CONV2RAD_32B( RADIUS_ATTR_TERMINATION_ACTION, RADIUS_TERMINATION_ACTION_RADIUS_REQUEST ); |
| 1472 | } |
| 1473 | |
| 1474 | if (ahdr->avp_value->u32 == ACV_ASS_NO_STATE_MAINTAINED) { |
| 1475 | no_str = 1; |
| 1476 | } |
| 1477 | break; |
| 1478 | |
| 1479 | /* Authorization-Lifetime already handled */ |
| 1480 | |
| 1481 | case DIAM_ATTR_CALLBACK_ID: |
| 1482 | CONV2RAD_STR(RADIUS_ATTR_CALLBACK_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1483 | break; |
| 1484 | |
| 1485 | case DIAM_ATTR_CALLBACK_NUMBER: |
| 1486 | CONV2RAD_STR(RADIUS_ATTR_CALLBACK_NUMBER, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1487 | break; |
| 1488 | |
| 1489 | /* Called-Station-Id is not present in answers */ |
| 1490 | /* Calling-Station-Id is not present in answers */ |
| 1491 | /* CHAP-Auth is not present in answers */ |
| 1492 | /* CHAP-Challenge is not present in answers */ |
| 1493 | |
| 1494 | case DIAM_ATTR_CLASS: |
| 1495 | CONV2RAD_STR(RADIUS_ATTR_CLASS, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1496 | break; |
| 1497 | |
| 1498 | case DIAM_ATTR_CONFIGURATION_TOKEN: |
| 1499 | /* We might as well remove it since it's not supposed to be sent to the NAS... */ |
| 1500 | CONV2RAD_STR(RADIUS_ATTR_CONFIGURATION_TOKEN, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1501 | break; |
| 1502 | |
| 1503 | /* Connect-Info is not present in answers */ |
| 1504 | |
| 1505 | case DIAM_ATTR_FILTER_ID: |
| 1506 | CONV2RAD_STR(RADIUS_ATTR_FILTER_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1507 | break; |
| 1508 | |
| 1509 | case DIAM_ATTR_FRAMED_APPLETALK_LINK: |
| 1510 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_APPLETALK_LINK, ahdr->avp_value->u32); |
| 1511 | break; |
| 1512 | |
| 1513 | case DIAM_ATTR_FRAMED_APPLETALK_NETWORK: |
| 1514 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_APPLETALK_NETWORK, ahdr->avp_value->u32); |
| 1515 | break; |
| 1516 | |
| 1517 | case DIAM_ATTR_FRAMED_APPLETALK_ZONE: |
| 1518 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_APPLETALK_ZONE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1519 | break; |
| 1520 | |
| 1521 | case DIAM_ATTR_FRAMED_COMPRESSION: |
| 1522 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_COMPRESSION, ahdr->avp_value->u32); |
| 1523 | break; |
| 1524 | |
| 1525 | case DIAM_ATTR_FRAMED_INTERFACE_ID: |
| 1526 | CONV2RAD_64B(RADIUS_ATTR_FRAMED_INTERFACE_ID, ahdr->avp_value->u64); |
| 1527 | break; |
| 1528 | |
| 1529 | case DIAM_ATTR_FRAMED_IP_ADDRESS: |
| 1530 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_IP_ADDRESS, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1531 | break; |
| 1532 | |
| 1533 | case DIAM_ATTR_FRAMED_IP_NETMASK: |
| 1534 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_IP_NETMASK, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1535 | break; |
| 1536 | |
| 1537 | case DIAM_ATTR_FRAMED_IPV6_PREFIX: |
| 1538 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_IPV6_PREFIX, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1539 | break; |
| 1540 | |
| 1541 | case DIAM_ATTR_FRAMED_IPV6_POOL: |
| 1542 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_IPV6_POOL, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1543 | break; |
| 1544 | |
| 1545 | case DIAM_ATTR_FRAMED_IPV6_ROUTE: |
| 1546 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_IPV6_ROUTE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1547 | break; |
| 1548 | |
| 1549 | case DIAM_ATTR_FRAMED_IPX_NETWORK: |
| 1550 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_IPX_NETWORK, ahdr->avp_value->u32); |
| 1551 | break; |
| 1552 | |
| 1553 | case DIAM_ATTR_FRAMED_MTU: |
| 1554 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_MTU, ahdr->avp_value->u32); |
| 1555 | break; |
| 1556 | |
| 1557 | case DIAM_ATTR_FRAMED_POOL: |
| 1558 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_POOL, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1559 | break; |
| 1560 | |
| 1561 | case DIAM_ATTR_FRAMED_PROTOCOL: |
| 1562 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_PROTOCOL, ahdr->avp_value->u32); |
| 1563 | break; |
| 1564 | |
| 1565 | case DIAM_ATTR_FRAMED_ROUTE: |
| 1566 | CONV2RAD_STR(RADIUS_ATTR_FRAMED_ROUTE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1567 | break; |
| 1568 | |
| 1569 | case DIAM_ATTR_FRAMED_ROUTING: |
| 1570 | CONV2RAD_32B(RADIUS_ATTR_FRAMED_ROUTING, ahdr->avp_value->u32); |
| 1571 | break; |
| 1572 | |
| 1573 | case DIAM_ATTR_IDLE_TIMEOUT: |
| 1574 | CONV2RAD_32B(RADIUS_ATTR_IDLE_TIMEOUT, ahdr->avp_value->u32); |
| 1575 | break; |
| 1576 | |
| 1577 | case DIAM_ATTR_LOGIN_IP_HOST: |
| 1578 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_IP_HOST, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1579 | break; |
| 1580 | |
| 1581 | case DIAM_ATTR_LOGIN_IPV6_HOST: |
| 1582 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_IPV6_HOST, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 0); |
| 1583 | break; |
| 1584 | |
| 1585 | case DIAM_ATTR_LOGIN_LAT_GROUP: |
| 1586 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_LAT_GROUP, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1587 | break; |
| 1588 | |
| 1589 | case DIAM_ATTR_LOGIN_LAT_NODE: |
| 1590 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_LAT_NODE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1591 | break; |
| 1592 | |
| 1593 | case DIAM_ATTR_LOGIN_LAT_PORT: |
| 1594 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_LAT_PORT, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1595 | break; |
| 1596 | |
| 1597 | case DIAM_ATTR_LOGIN_LAT_SERVICE: |
| 1598 | CONV2RAD_STR(RADIUS_ATTR_LOGIN_LAT_SERVICE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1599 | break; |
| 1600 | |
| 1601 | case DIAM_ATTR_LOGIN_SERVICE: |
| 1602 | CONV2RAD_32B(RADIUS_ATTR_LOGIN_SERVICE, ahdr->avp_value->u32); |
| 1603 | break; |
| 1604 | |
| 1605 | case DIAM_ATTR_LOGIN_TCP_PORT: |
| 1606 | CONV2RAD_32B(RADIUS_ATTR_LOGIN_TCP_PORT, ahdr->avp_value->u32); |
| 1607 | break; |
| 1608 | |
| 1609 | /* |
| 1610 | - If the |
| 1611 | Multi-Round-Time-Out AVP is present, the value of the AVP MUST |
| 1612 | be inserted in the RADIUS Session-Timeout AVP. |
| 1613 | |
| 1614 | o As described in [NASREQ], if the Result-Code AVP set to |
| 1615 | DIAMETER_MULTI_ROUND_AUTH and the Multi-Round-Time-Out AVP is |
| 1616 | present, it is translated to the RADIUS Session-Timeout attribute. |
| 1617 | */ |
| 1618 | case DIAM_ATTR_MULTI_ROUND_TIMEOUT: |
| 1619 | CONV2RAD_32B(RADIUS_ATTR_SESSION_TIMEOUT, ahdr->avp_value->u32); |
| 1620 | break; |
| 1621 | |
| 1622 | case DIAM_ATTR_NAS_FILTER_RULE: |
| 1623 | /* This is not translatable to RADIUS */ |
| 1624 | fd_log_debug("[auth.rgwx] Received Diameter answer with non-translatable NAS-Filter-Rule AVP from '%.*s' (session: '%.*s'), ignoring.", |
| 1625 | (int)oh->avp_value->os.len, oh->avp_value->os.data, |
| 1626 | (int)sidlen, sid); |
| 1627 | handled = 0; |
| 1628 | break; |
| 1629 | |
| 1630 | /* NAS-Identifier is not present in answers */ |
| 1631 | /* NAS-IP-Address is not present in answers */ |
| 1632 | /* NAS-IPv6-Address is not present in answers */ |
| 1633 | /* NAS-Port is not present in answers */ |
| 1634 | /* NAS-Port-Id is not present in answers */ |
| 1635 | /* NAS-Port-Type is not present in answers */ |
| 1636 | |
| 1637 | case DIAM_ATTR_ORIGIN_AAA_PROTOCOL: |
| 1638 | /* We just remove this AVP */ |
| 1639 | break; |
| 1640 | |
| 1641 | /* Originating-Line-Info is not present in answers */ |
| 1642 | |
| 1643 | case DIAM_ATTR_PASSWORD_RETRY: |
| 1644 | CONV2RAD_32B(RADIUS_ATTR_PASSWORD_RETRY, ahdr->avp_value->u32); |
| 1645 | break; |
| 1646 | |
| 1647 | case DIAM_ATTR_PORT_LIMIT: |
| 1648 | CONV2RAD_32B(RADIUS_ATTR_PORT_LIMIT, ahdr->avp_value->u32); |
| 1649 | break; |
| 1650 | |
| 1651 | case DIAM_ATTR_PROMPT: |
| 1652 | CONV2RAD_32B(RADIUS_ATTR_PROMPT, ahdr->avp_value->u32); |
| 1653 | break; |
| 1654 | |
| 1655 | case DIAM_ATTR_QOS_FILTER_RULE: |
| 1656 | /* This is not translatable to RADIUS */ |
| 1657 | fd_log_debug("[auth.rgwx] Received Diameter answer with non-translatable QoS-Filter-Rule AVP from '%.*s' (session: '%.*s'), ignoring.", |
| 1658 | (int)oh->avp_value->os.len, oh->avp_value->os.data, |
| 1659 | (int)sidlen, sid); |
| 1660 | handled = 0; |
| 1661 | break; |
| 1662 | |
| 1663 | /* Re-Auth-Request-Type already handled */ |
| 1664 | |
| 1665 | case DIAM_ATTR_REPLY_MESSAGE: |
| 1666 | CONV2RAD_STR(RADIUS_ATTR_REPLY_MESSAGE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1667 | break; |
| 1668 | |
| 1669 | case DIAM_ATTR_SERVICE_TYPE: |
| 1670 | CONV2RAD_32B(RADIUS_ATTR_SERVICE_TYPE, ahdr->avp_value->u32); |
| 1671 | break; |
| 1672 | |
| 1673 | case DIAM_ATTR_STATE: |
| 1674 | CONV2RAD_STR(RADIUS_ATTR_STATE, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 2); |
| 1675 | break; |
| 1676 | |
| 1677 | case DIAM_ATTR_TUNNELING: |
| 1678 | { |
| 1679 | #define CONV2RAD_TUN_STR( _attr_, _data_, _len_, _trunc_) { \ |
| 1680 | size_t __l = (size_t)(_len_); \ |
| 1681 | size_t __w = (__l > 252) ? 252 : __l; \ |
| 1682 | size_t __off = 0; \ |
| 1683 | if ((_trunc_) == 0) { \ |
| 1684 | CHECK_PARAMS( __l <= 252 ); \ |
| 1685 | } \ |
| 1686 | if ((__l > 252) && (_trunc_ == 1)) { \ |
| 1687 | TRACE_DEBUG(FULL, "Attribute truncated!"); \ |
| 1688 | __l = 252; \ |
| 1689 | } \ |
| 1690 | buf[0] = tuntag; \ |
| 1691 | memcpy(&buf[1], (_data_), __w); \ |
| 1692 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), &buf[0], __w + 1)); \ |
| 1693 | while (__l -= __w) { \ |
| 1694 | __off += __w; \ |
| 1695 | __w = (__l > 253) ? 253 : __l; \ |
| 1696 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), (_data_) + __off, __w)); \ |
| 1697 | } \ |
| 1698 | } |
| 1699 | |
| 1700 | #define CONV2RAD_TUN_32B( _attr_, _data_) { \ |
| 1701 | uint32_t __v = htonl((uint32_t)(_data_) | (tuntag << 24)); \ |
| 1702 | CHECK_MALLOC(radius_msg_add_attr(*rad_fw, (_attr_), (uint8_t *)&__v, sizeof(__v))); \ |
| 1703 | } |
| 1704 | struct avp *inavp, *innext; |
| 1705 | tuntag++; |
| 1706 | CHECK_FCT( fd_msg_browse(avp, MSG_BRW_FIRST_CHILD, &innext, NULL) ); |
| 1707 | while (innext) { |
| 1708 | inavp = innext; |
| 1709 | CHECK_FCT( fd_msg_browse(inavp, MSG_BRW_NEXT, &innext, NULL) ); |
| 1710 | CHECK_FCT( fd_msg_avp_hdr ( inavp, &ahdr ) ); |
| 1711 | |
| 1712 | if ( ! (ahdr->avp_flags & AVP_FLAG_VENDOR)) { |
| 1713 | switch (ahdr->avp_code) { |
| 1714 | case DIAM_ATTR_TUNNEL_TYPE: |
| 1715 | CONV2RAD_TUN_32B( RADIUS_ATTR_TUNNEL_TYPE, ahdr->avp_value->u32); |
| 1716 | break; |
| 1717 | |
| 1718 | case DIAM_ATTR_TUNNEL_MEDIUM_TYPE: |
| 1719 | CONV2RAD_TUN_32B( RADIUS_ATTR_TUNNEL_MEDIUM_TYPE, ahdr->avp_value->u32); |
| 1720 | break; |
| 1721 | |
| 1722 | case DIAM_ATTR_TUNNEL_CLIENT_ENDPOINT: |
| 1723 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_CLIENT_ENDPOINT, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1724 | break; |
| 1725 | |
| 1726 | case DIAM_ATTR_TUNNEL_SERVER_ENDPOINT: |
| 1727 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_SERVER_ENDPOINT, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1728 | break; |
| 1729 | |
| 1730 | case DIAM_ATTR_TUNNEL_PREFERENCE: |
| 1731 | CONV2RAD_TUN_32B( RADIUS_ATTR_TUNNEL_PREFERENCE, ahdr->avp_value->u32); |
| 1732 | break; |
| 1733 | |
| 1734 | case DIAM_ATTR_TUNNEL_CLIENT_AUTH_ID: |
| 1735 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_CLIENT_AUTH_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1736 | break; |
| 1737 | |
| 1738 | case DIAM_ATTR_TUNNEL_SERVER_AUTH_ID: |
| 1739 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_SERVER_AUTH_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1740 | break; |
| 1741 | |
| 1742 | case DIAM_ATTR_TUNNEL_ASSIGNMENT_ID: |
| 1743 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_ASSIGNMENT_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1744 | break; |
| 1745 | |
| 1746 | case DIAM_ATTR_TUNNEL_PASSWORD: |
| 1747 | { |
| 1748 | /* This AVP must be encoded for RADIUS (similar to radius_msg_add_attr_user_password) |
| 1749 | 0 1 2 3 |
| 1750 | 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 |
| 1751 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| 1752 | | Type | Length | Tag | Salt |
| 1753 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| 1754 | Salt (cont) | String ... |
| 1755 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| 1756 | */ |
| 1757 | size_t pos; |
| 1758 | int i; |
| 1759 | uint8_t * secret; /* S */ |
| 1760 | size_t secret_len; |
| 1761 | uint8_t hash[16]; /* b(i) */ |
| 1762 | const uint8_t *addr[3]; |
| 1763 | size_t len[3]; |
| 1764 | |
| 1765 | /* We need the request authenticator */ |
| 1766 | CHECK_PARAMS(st); |
| 1767 | |
| 1768 | /* Retrieve the shared secret */ |
| 1769 | CHECK_FCT(rgw_clients_getkey(cli, &secret, &secret_len)); |
| 1770 | |
| 1771 | /* Beginning of the buffer */ |
| 1772 | buf[0] = tuntag; |
| 1773 | buf[1] = (uint8_t)(lrand48()); /* A (hi bits) */ |
| 1774 | buf[2] = (uint8_t)(lrand48()); /* A (low bits) */ |
| 1775 | |
| 1776 | /* The plain text string P */ |
| 1777 | CHECK_PARAMS(ahdr->avp_value->os.len < 240); |
| 1778 | buf[3] = ahdr->avp_value->os.len; |
| 1779 | memcpy(&buf[4], ahdr->avp_value->os.data, ahdr->avp_value->os.len); |
| 1780 | memset(&buf[4 + ahdr->avp_value->os.len], 0, sizeof(buf) - 4 - ahdr->avp_value->os.len); |
| 1781 | |
| 1782 | /* Initial b1 = MD5(S + R + A) */ |
| 1783 | addr[0] = secret; |
| 1784 | len[0] = secret_len; |
| 1785 | addr[1] = st->req_auth; |
| 1786 | len[1] = 16; |
| 1787 | addr[2] = &buf[1]; |
| 1788 | len[2] = 2; |
| 1789 | md5_vector(3, addr, len, hash); |
| 1790 | |
| 1791 | /* Initial c(1) = p(1) xor b(1) */ |
| 1792 | for (i = 0; i < 16; i++) { |
| 1793 | buf[i + 3] ^= hash[i]; |
| 1794 | } |
| 1795 | pos = 16; |
| 1796 | |
| 1797 | /* loop */ |
| 1798 | while (pos < ahdr->avp_value->os.len + 1) { |
| 1799 | addr[0] = secret; |
| 1800 | len[0] = secret_len; |
| 1801 | addr[1] = &buf[pos - 13]; |
| 1802 | len[1] = 16; |
| 1803 | /* b(i) = MD5( S + c(i-1) */ |
| 1804 | md5_vector(2, addr, len, hash); |
| 1805 | |
| 1806 | /* c(i) = p(i) xor b(i) */ |
| 1807 | for (i = 0; i < 16; i++) |
| 1808 | buf[pos + i + 3] ^= hash[i]; |
| 1809 | |
| 1810 | pos += 16; |
| 1811 | } |
| 1812 | |
| 1813 | CONV2RAD_STR(RADIUS_ATTR_TUNNEL_PASSWORD, &buf[0], pos + 3, 0); |
| 1814 | } |
| 1815 | break; |
| 1816 | |
| 1817 | case DIAM_ATTR_TUNNEL_PRIVATE_GROUP_ID: |
| 1818 | CONV2RAD_TUN_STR(RADIUS_ATTR_TUNNEL_PRIVATE_GROUP_ID, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1819 | break; |
| 1820 | |
| 1821 | default: |
| 1822 | TRACE_DEBUG(FULL, "Ignored unknown AVP inside Tunneling AVP (%d)", ahdr->avp_code); |
| 1823 | } |
| 1824 | } else { |
| 1825 | TRACE_DEBUG(FULL, "Ignored unknown Vendor AVP inside Tunneling AVP (%d, %d)", ahdr->avp_vendor, ahdr->avp_code); |
| 1826 | } |
| 1827 | } |
| 1828 | } |
| 1829 | break; |
| 1830 | |
| 1831 | case DIAM_ATTR_USER_NAME: |
| 1832 | CONV2RAD_STR(RADIUS_ATTR_USER_NAME, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1833 | break; |
| 1834 | |
| 1835 | /* User-Password never present in answers */ |
| 1836 | |
| 1837 | /* RFC 4072 (AVP in the order of the EAP Command AVP Table) */ |
| 1838 | /* |
| 1839 | o Diameter Accounting-EAP-Auth-Method AVPs, if present, are |
| 1840 | discarded. |
| 1841 | */ |
| 1842 | case DIAM_ATTR_ACCOUNTING_EAP_AUTH_METHOD: |
| 1843 | break; |
| 1844 | |
| 1845 | /* |
| 1846 | o Diameter EAP-Master-Session-Key AVP can be translated to the |
| 1847 | vendor-specific RADIUS MS-MPPE-Recv-Key and MS-MPPE-Send-Key |
| 1848 | attributes [RFC2548]. The first up to 32 octets of the key is |
| 1849 | stored into MS-MPPE-Recv-Key, and the next up to 32 octets (if |
| 1850 | present) are stored into MS-MPPE-Send-Key. The encryption of this |
| 1851 | attribute is described in [RFC2548]. |
| 1852 | */ |
| 1853 | case DIAM_ATTR_EAP_MASTER_SESSION_KEY: |
| 1854 | { |
| 1855 | uint8_t * secret; /* S */ |
| 1856 | size_t secret_len; |
| 1857 | size_t recv_len, send_len; |
| 1858 | |
| 1859 | /* We need the request authenticator */ |
| 1860 | CHECK_PARAMS(st); |
| 1861 | |
| 1862 | /* Retrieve the shared secret */ |
| 1863 | CHECK_FCT(rgw_clients_getkey(cli, &secret, &secret_len)); |
| 1864 | |
| 1865 | if (ahdr->avp_value->os.len != 64) { |
| 1866 | TRACE_DEBUG(INFO, "Received EAP-Master-Session-Key attribute with length %zd != 64.", ahdr->avp_value->os.len) |
| 1867 | } |
| 1868 | |
| 1869 | CHECK_PARAMS(ahdr->avp_value->os.len <= 64); |
| 1870 | recv_len = ahdr->avp_value->os.len >= 32 ? 32 : ahdr->avp_value->os.len; |
| 1871 | send_len = ahdr->avp_value->os.len - recv_len; |
| 1872 | |
| 1873 | if ( ! radius_msg_add_mppe_keys(*rad_fw, st->req_auth, secret, secret_len, |
| 1874 | ahdr->avp_value->os.data + recv_len, send_len, |
| 1875 | ahdr->avp_value->os.data, recv_len) ) { |
| 1876 | TRACE_DEBUG(INFO, "Error while converting EAP-Master-Session-Key to RADIUS message"); |
| 1877 | return ENOMEM; |
| 1878 | } |
| 1879 | } |
| 1880 | break; |
| 1881 | |
| 1882 | case DIAM_ATTR_EAP_KEY_NAME: |
| 1883 | CONV2RAD_STR(RADIUS_ATTR_EAP_KEY_NAME, ahdr->avp_value->os.data, ahdr->avp_value->os.len, 1); |
| 1884 | break; |
| 1885 | |
| 1886 | /* |
| 1887 | o Diameter EAP-Payload AVP is translated to RADIUS EAP-Message |
| 1888 | attribute(s). If necessary, the value is split into multiple |
| 1889 | RADIUS EAP-Message attributes. |
| 1890 | */ |
| 1891 | case DIAM_ATTR_EAP_PAYLOAD: |
| 1892 | if ( ! radius_msg_add_eap(*rad_fw, ahdr->avp_value->os.data, ahdr->avp_value->os.len) ) { |
| 1893 | TRACE_DEBUG(INFO, "Error while converting EAP payload to RADIUS message"); |
| 1894 | return ENOMEM; |
| 1895 | } |
| 1896 | break; |
| 1897 | |
| 1898 | /* |
| 1899 | o Diameter EAP-Reissued-Payload AVP is translated to a message that |
| 1900 | contains RADIUS EAP-Message attribute(s), and a RADIUS Error-Cause |
| 1901 | attribute [RFC3576] with value 202 (decimal), "Invalid EAP Packet |
| 1902 | (Ignored)" [RFC3579]. |
| 1903 | */ |
| 1904 | case DIAM_ATTR_EAP_REISSUED_PAYLOAD: |
| 1905 | if ( ! radius_msg_add_eap(*rad_fw, ahdr->avp_value->os.data, ahdr->avp_value->os.len) ) { |
| 1906 | TRACE_DEBUG(INFO, "Error while converting EAP reissued payload to RADIUS message"); |
| 1907 | return ENOMEM; |
| 1908 | } |
| 1909 | |
| 1910 | error_cause = 202; /* Invalid EAP Packet */ |
| 1911 | break; |
| 1912 | |
| 1913 | default: |
| 1914 | /* Leave the AVP in the message for further treatment */ |
| 1915 | handled = 0; |
| 1916 | } |
| 1917 | } else { |
| 1918 | /* Vendor-specific AVPs */ |
| 1919 | switch (ahdr->avp_vendor) { |
| 1920 | |
| 1921 | default: /* unknown vendor */ |
| 1922 | handled = 0; |
| 1923 | } |
| 1924 | } |
| 1925 | |
| 1926 | if (handled) { |
| 1927 | CHECK_FCT( fd_msg_free( avp ) ); |
| 1928 | } |
| 1929 | } |
| 1930 | |
| 1931 | CHECK_FCT( fd_msg_free( aoh ) ); |
| 1932 | free(st); |
| 1933 | |
| 1934 | if (error_cause) { |
| 1935 | if ( ! radius_msg_add_attr_int32(*rad_fw, RADIUS_ATTR_ERROR_CAUSE, error_cause) ) { |
| 1936 | TRACE_DEBUG(INFO, "Error while adding Error-Cause attribute in RADIUS message"); |
| 1937 | return ENOMEM; |
| 1938 | } |
| 1939 | } |
| 1940 | |
| 1941 | if ((*rad_fw)->hdr->code == RADIUS_CODE_ACCESS_ACCEPT) { |
| 1942 | /* Add the auth-application-id required for STR, or 0 if no STR is required */ |
| 1943 | CHECK_FCT( fd_msg_hdr( *diam_ans, &hdr ) ); |
| 1944 | if (sizeof(buf) < (sz = snprintf((char *)buf, sizeof(buf), CLASS_AAI_PREFIX "%u", |
| 1945 | no_str ? 0 : hdr->msg_appl))) { |
| 1946 | TRACE_DEBUG(INFO, "Data truncated in Class attribute: %s", buf); |
| 1947 | } |
| 1948 | CONV2RAD_STR(RADIUS_ATTR_CLASS, buf, sz, 0); |
| 1949 | } |
| 1950 | |
| 1951 | return 0; |
| 1952 | } |
| 1953 | |
| 1954 | /* The exported symbol */ |
| 1955 | struct rgw_api rgwp_descriptor = { |
| 1956 | .rgwp_name = "auth", |
| 1957 | .rgwp_conf_parse = auth_conf_parse, |
| 1958 | .rgwp_conf_free = auth_conf_free, |
| 1959 | .rgwp_rad_req = auth_rad_req, |
| 1960 | .rgwp_diam_ans = auth_diam_ans |
| 1961 | }; |