| --- |
| # Copyright 2018-present Open Networking Foundation |
| # Copyright 2018 Intel Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| apiVersion: v1 |
| kind: ConfigMap |
| metadata: |
| name: ngiccp-config |
| data: |
| adc_rules.cfg: | |
| [GLOBAL] |
| NUM_ADC_RULES = 5 |
| |
| ;FORMAT :: |
| ;ADC_TYPE : [ DOMAIN = 0 | IP = 1 | IP PREFIX =2 ] |
| ; |
| ;if ADC_TYPE = 0 |
| ; DOMAIN |
| ;elseif ADC_TYPE = 1 |
| ; IP |
| ;elseif ADC_TYPE = 2 |
| ; IP |
| ; PREFIX |
| ;else |
| ; NONE |
| ; |
| ;NOTE : |
| ;Rules defined first have a higher priority, unless DROP is specified |
| ;(i.e. multiple rules for the same IP). |
| ;When specifying DROP with an IP address, use a prefix of 32 to prevent DNS |
| ;results from overwriting rule. |
| |
| |
| [ADC_RULE_1] |
| ADC_TYPE = 2 |
| IP = 0.0.0.0 |
| PREFIX = 0 |
| |
| [ADC_RULE_2] |
| ADC_TYPE = 2 |
| IP = 13.1.1.0 |
| PREFIX = 24 |
| |
| [ADC_RULE_3] |
| ADC_TYPE = 1 |
| IP = 13.1.1.254 |
| |
| [ADC_RULE_4] |
| ADC_TYPE = 0 |
| DOMAIN = www.example.gov |
| |
| [ADC_RULE_5] |
| ADC_TYPE = 0 |
| DOMAIN = www.drop_example.com |
| cdr.cfg: | |
| CDR_PATH=./cdr |
| MASTER_CDR=./cdr/master.csv |
| cp_config.cfg: | |
| if [ ! -d "/dev/hugepages" ]; then |
| MEMORY="--no-huge -m $((MEM_LIMIT-1024))" |
| fi |
| |
| SGW_S1U_IP=$(netstat -ie | grep -A1 s1u-net | tail -1 | awk '{print $2}' | tr -d addr:) |
| SHARED_DIR="/opt/ngic/config/shared" |
| if [ -d ${SHARED_DIR} ]; then |
| while [ ! -f ${SHARED_DIR}/SGW_S1U_IP ]; do echo "Waiting for SGW_S1U_IP"; sleep 2; done |
| SGW_S1U_IP=$(cat ${SHARED_DIR}/SGW_S1U_IP) |
| fi |
| |
| SGW_S11_IP=$(hostname) |
| MGMT_INFO="-s ${SGW_S11_IP} -m ${MME_S11_IP} -w ${SGW_S1U_IP}" |
| APN_INFO="-i ${IP_POOL_IP} -p ${IP_POOL_MASK} -a ${APN}" |
| SPGW_CFG="-d 03 -l 2 -r 7.7.7.7 -g 6.6.6.6 -v 4.4.4.4 -u 5.5.5.5" |
| |
| TEID_INFO="-t ${S11_TEID_POOL_START} -e ${S11_TEID_POOL_STOP} -q ${S1U_TEID_POOL_START} -o ${S1U_TEID_POOL_STOP}" |
| APP_ARGS="${MGMT_INFO} ${APN_INFO} ${SPGW_CFG} ${TEID_INFO}" |
| |
| CORES="-c $(taskset -p $$ | awk '{print $NF}')" |
| DEVICES="--no-pci" |
| EAL_ARGS="${CORES} ${MEMORY} ${DEVICES}" |
| dp_config.cfg: | |
| get_pcimac_addr () { |
| ifname=$1 |
| cid="$(sed -ne '/hostname/p' /proc/1/task/1/mountinfo | awk -F '/' '{print $6}' |tr -d " " )" |
| cid="$cid-$ifname" |
| eval "export $2=$(awk -F '"' '{print $4}' /sriov-cni/$cid)" |
| eval "export $3=$(awk -F '"' '{print $8}' /sriov-cni/$cid)" |
| eval "export $4=$(awk -F '"' '{print $12}' /sriov-cni/$cid)" |
| } |
| |
| if [ -d "/sriov-cni" ]; then |
| echo "================== SR-IOV FOUND ============" |
| get_pcimac_addr s1u-net SGW_S1U_PCI S1U_MAC SGW_S1U_IP |
| get_pcimac_addr sgi-net SGW_SGI_PCI SGI_MAC SGW_SGI_IP |
| DEVICES="-w $SGW_S1U_PCI -w $SGW_SGI_PCI" |
| SHARED_DIR="/opt/ngic/config/shared" |
| echo $SGW_S1U_IP > ${SHARED_DIR}/SGW_S1U_IP |
| else #dev --vdev af_packt |
| echo "vdev (AF_PACKET)" |
| # set the variables we provide |
| SGW_S1U_IP=$(netstat -ie | grep -A1 s1u-net | tail -1 | awk '{print $2}' | tr -d addr:) |
| SGW_SGI_IP=$(netstat -ie | grep -A1 sgi-net | tail -1 | awk '{print $2}' | tr -d addr:) |
| S1U_MAC=$( netstat -ie | grep -B1 $SGW_S1U_IP | head -n1 | awk '{print $5}' ) |
| SGI_MAC=$( netstat -ie | grep -B1 $SGW_SGI_IP | head -n1 | awk '{print $5}' ) |
| |
| DEVICES="--no-pci --vdev eth_af_packet0,iface=s1u-net --vdev eth_af_packet1,iface=sgi-net" |
| fi |
| |
| if [ ! -d "/dev/hugepages" ]; then |
| MEMORY="--no-huge -m $((MEM_LIMIT-1024))" |
| fi |
| |
| CORES="-c $(taskset -p $$ | awk '{print $NF}')" |
| SPGW_CFG="--spgw_cfg 03" |
| EAL_ARGS="${CORES} ${MEMORY} ${DEVICES}" |
| |
| S1U="--s1u_ip ${SGW_S1U_IP} --s1u_mac ${S1U_MAC}" |
| SGI="--sgi_ip ${SGW_SGI_IP} --sgi_mac ${SGI_MAC} --sgi_gw_ip ${RTR_SGI_IP} --sgi_mask ${SGI_MASK}" |
| WORKERS="--num_workers 1" |
| MISC="--log 1" |
| APP_ARGS="${S1U} ${SGI} ${WORKERS} ${MISC} ${SPGW_CFG}" |
| interface.cfg: | |
| [0] |
| dp_comm_ip = {{ .Values.spgwu_hostname }} |
| dp_comm_port = {{ .Values.spgwu_port }} |
| cp_comm_ip = 127.0.0.1 |
| cp_comm_port = 21 |
| meter_profile.cfg: | |
| [GLOBAL] |
| NUM_OF_IDX = 7 |
| |
| [ENTRY_1] |
| ;Committed Information Rate (CIR). Measured in bytes per second. |
| ;MBR is mapped into CIR, convert MBR from bits to Bytes and set CIR. |
| CIR = 2342400 |
| ;Committed Burst Size unit = Bytes |
| CBS = 5856 |
| ;Excess Burst Size unit = Bytes |
| EBS = 11712 |
| ;Meter profile index. Refer this index in static_pcc.cfg to set AMBR/MBR |
| MTR_PROFILE_IDX = 3 |
| |
| [ENTRY_2] |
| ;1200 = 1756800 |
| ;1400 = 2049600 |
| ;1600 = 2342400 |
| CIR = 2342400 |
| CBS = 5856 |
| EBS = 11712 |
| MTR_PROFILE_IDX = 4 |
| |
| [ENTRY_3] |
| ; QCI5,QCI7 15.571kbps = 1947 B |
| CIR = 2342400 |
| CBS = 5856 |
| EBS = 11712 |
| MTR_PROFILE_IDX = 5 |
| |
| [ENTRY_4] |
| ; QCI1, 44kbps = 5500 B |
| CIR = 2342400 |
| CBS = 5856 |
| EBS = 11712 |
| MTR_PROFILE_IDX = 6 |
| |
| [ENTRY_5] |
| ; QCI9, 31.143kbps = 3893 B |
| CIR = 2342400 |
| CBS = 5856 |
| EBS = 11712 |
| MTR_PROFILE_IDX = 7 |
| |
| [ENTRY_6] |
| ; 128B, 7pps |
| CIR = 2342400 |
| CBS = 512 |
| EBS = 1024 |
| MTR_PROFILE_IDX = 8 |
| |
| [ENTRY_7] |
| ; 128B, 2pps |
| CIR = 2342400 |
| CBS = 512 |
| EBS = 1024 |
| MTR_PROFILE_IDX = 9 |
| |
| pcc_rules.cfg: | |
| [GLOBAL] |
| NUM_PCC_FILTERS = 9 |
| ;To config AMBR/MBR values refer meter_profile.cfg. specify only the |
| ;meter profile index to be set here. |
| UL_AMBR_MTR_PROFILE_IDX = 3 |
| DL_AMBR_MTR_PROFILE_IDX = 4 |
| |
| ;default filter - must be first for now (until DP doesn't install any filters) |
| ;associated with default adc rule |
| [PCC_FILTER_1] |
| RULE_NAME = DefaultRule |
| RATING_GROUP = 9 |
| SERVICE_ID = 0 |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 1 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = 0 |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 254 |
| DROP_PKT_COUNT = 0 |
| ;Specify the meter profile index from meter_profile.cfg |
| UL_MBR_MTR_PROFILE_IDX = 7 |
| DL_MBR_MTR_PROFILE_IDX = 7 |
| ;List of ADC filter indices |
| SDF_FILTER_IDX = 99998 |
| |
| [PCC_FILTER_2] |
| RULE_NAME = sdf_rule_1 |
| RATING_GROUP = 5 |
| SERVICE_ID = 0 |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 2 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = 0 |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 1 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 5 |
| DL_MBR_MTR_PROFILE_IDX = 5 |
| ;List of SDF filter indices |
| SDF_FILTER_IDX = 1 |
| |
| [PCC_FILTER_3] |
| RULE_NAME = sdf_rule_2 |
| RATING_GROUP = 1 |
| SERVICE_ID = 0 |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 3 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = 0 |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 18 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 6 |
| DL_MBR_MTR_PROFILE_IDX = 6 |
| ;List of SDF filter indices |
| SDF_FILTER_IDX = 2 |
| |
| [PCC_FILTER_4] |
| RULE_NAME = adc_rule_1 |
| RATING_GROUP = Zero-Rate |
| SERVICE_ID = Internet |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 8 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| REDIRECT_INFO = 0 |
| SPONSOR_ID = Example |
| PRECEDENCE = 15 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 7 |
| DL_MBR_MTR_PROFILE_IDX = 7 |
| ;List of SDF filter indices |
| ADC_FILTER_IDX = 1 |
| |
| [PCC_FILTER_5] |
| RULE_NAME = adc_rule_2 |
| RATING_GROUP = 0 |
| SERVICE_ID = CIPA |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 9 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = Example |
| REDIRECT_INFO = 0 |
| SPONSOR_ID = Example |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 4 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 0 |
| DL_MBR_MTR_PROFILE_IDX = 0 |
| ;List of SDF filter indices |
| ADC_FILTER_IDX = 2 |
| |
| [PCC_FILTER_6] |
| RULE_NAME = sdf_rule_3 |
| RATING_GROUP = 7 |
| SERVICE_ID = 0 |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 4 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = 0 |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 17 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 5 |
| DL_MBR_MTR_PROFILE_IDX = 5 |
| ;List of SDF filter indices |
| SDF_FILTER_IDX = 3 |
| |
| [PCC_FILTER_7] |
| RULE_NAME = adc_rule_3 |
| RATING_GROUP = Zero-Rate |
| SERVICE_ID = Internet |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 5 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = Example |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 210 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 7 |
| DL_MBR_MTR_PROFILE_IDX = 7 |
| ;List of SDF filter indices |
| ADC_FILTER_IDX = 4 |
| |
| [PCC_FILTER_8] |
| RULE_NAME = adc_rule_4 |
| RATING_GROUP = Zero-Rate |
| SERVICE_ID = Management |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 6 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = Example |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 200 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 7 |
| DL_MBR_MTR_PROFILE_IDX = 7 |
| ;List of SDF filter indices |
| ADC_FILTER_IDX = 12 |
| |
| [PCC_FILTER_9] |
| RULE_NAME = adc_rule_5 |
| RATING_GROUP = Zero-Rate |
| SERVICE_ID = Provisioning |
| RULE_STATUS = 0 |
| GATE_STATUS = 1 |
| SESSION_CONT = 0 |
| REPORT_LEVEL = 7 |
| CHARGING_MODE = 0 |
| METERING_METHOD = 0 |
| MUTE_NOTIFY = 0 |
| MONITORING_KEY = 0 |
| SPONSOR_ID = Example |
| REDIRECT_INFO = 0 |
| PRECEDENCE = 220 |
| DROP_PKT_COUNT = 0 |
| UL_MBR_MTR_PROFILE_IDX = 7 |
| DL_MBR_MTR_PROFILE_IDX = 7 |
| ;List of SDF filter indices |
| ADC_FILTER_IDX = 3 |
| sdf_rules.cfg: | |
| [GLOBAL] |
| NUM_SDF_FILTERS = 4 |
| |
| [SDF_FILTER_1] |
| DIRECTION = downlink_only |
| IPV4_REMOTE = 13.2.1.113 |
| IPV4_REMOTE_MASK = 255.255.255.0 |
| PROTOCOL = 17 |
| LOCAL_LOW_LIMIT_PORT = 0 |
| LOCAL_HIGH_LIMIT_PORT = 65535 |
| REMOTE_LOW_LIMIT_PORT = 0 |
| REMOTE_HIGH_LIMIT_PORT = 65535 |
| |
| [SDF_FILTER_2] |
| DIRECTION = uplink_only |
| IPV4_LOCAL = 16.255.255.0 |
| IPV4_LOCAL_MASK = 255.255.255.0 |
| PROTOCOL = 17 |
| LOCAL_LOW_LIMIT_PORT = 0 |
| LOCAL_HIGH_LIMIT_PORT = 65535 |
| REMOTE_LOW_LIMIT_PORT = 0 |
| REMOTE_HIGH_LIMIT_PORT = 65535 |
| |
| [SDF_FILTER_3] |
| DIRECTION = downlink_only |
| IPV4_REMOTE = 130.10.0.0 |
| IPV4_REMOTE_MASK = 255.255.0.0 |
| PROTOCOL = 17 |
| REMOTE_LOW_LIMIT_PORT = 5060 |
| REMOTE_HIGH_LIMIT_PORT = 5060 |
| |
| [SDF_FILTER_4] |
| DIRECTION = uplink_only |
| IPV4_REMOTE = 103.1.0.0 |
| IPV4_REMOTE_MASK = 255.255.0.0 |
| PROTOCOL = 17 |
| LOCAL_LOW_LIMIT_PORT = 17000 |
| LOCAL_HIGH_LIMIT_PORT = 17010 |
| |
| --- |
| apiVersion: v1 |
| kind: ConfigMap |
| metadata: |
| name: cassandra |
| data: |
| cassandra-rackdc.properties: | |
| dc=DC1 |
| rack=RAC1 |
| prefer_local=true |
| --- |
| apiVersion: v1 |
| kind: ConfigMap |
| metadata: |
| name: hss |
| data: |
| acl.conf: | |
| ALLOW_OLD_TLS *.cluster.local |
| hss.conf: | |
| # -------- Local --------- |
| # The first parameter in this section is Identity, which will be used to |
| # identify this peer in the Diameter network. The Diameter protocol mandates |
| # that the Identity used is a valid FQDN for the peer. This parameter can be |
| # omitted, in that case the framework will attempt to use system default value |
| # (as returned by hostname --fqdn). |
| Identity = "HSS_IDENTITY"; |
| |
| # In Diameter, all peers also belong to a Realm. If the realm is not specified, |
| # the framework uses the part of the Identity after the first dot. |
| Realm = "HSS_REALM"; |
| |
| |
| # This parameter is mandatory, even if it is possible to disable TLS for peers |
| # connections. A valid certificate for this Diameter Identity is expected. |
| TLS_Cred = "./conf/HSS_HOST.cert.pem", "./conf/HSS_HOST.key.pem"; |
| TLS_CA = "./conf/cacert.pem"; |
| |
| |
| # Disable use of TCP protocol (only listen and connect in SCTP) |
| # Default : TCP enabled |
| No_SCTP; |
| |
| |
| # This option is ignored if freeDiameter is compiled with DISABLE_SCTP option. |
| # Prefer TCP instead of SCTP for establishing new connections. |
| # This setting may be overwritten per peer in peer configuration blocs. |
| # Default : SCTP is attempted first. |
| Prefer_TCP; |
| |
| |
| # Disable use of IPv6 addresses (only IP) |
| # Default : IPv6 enabled |
| No_IPv6; |
| |
| |
| # Overwrite the number of SCTP streams. This value should be kept low, |
| # especially if you are using TLS over SCTP, because it consumes a lot of |
| # resources in that case. See tickets 19 and 27 for some additional details on |
| # this. |
| # Limit the number of SCTP streams |
| SCTP_streams = 3; |
| |
| |
| # By default, freeDiameter acts as a Diameter Relay Agent by forwarding all |
| # messages it cannot handle locally. This parameter disables this behavior. |
| NoRelay; |
| |
| |
| # Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA exchange is completed |
| # on the unsecure connection. The alternative is RFC6733 mechanism, where TLS protects also the |
| # CER/CEA exchange on a dedicated secure port. |
| # This parameter only affects outgoing connections. |
| # The setting can be also defined per-peer (see Peers configuration section). |
| # Default: use RFC6733 method with separate port for TLS. |
| |
| #TLS_old_method; |
| |
| |
| # Number of parallel threads that will handle incoming application messages. |
| # This parameter may be deprecated later in favor of a dynamic number of threads |
| # depending on the load. |
| AppServThreads = 4; |
| |
| # Specify the addresses on which to bind the listening server. This must be |
| # specified if the framework is unable to auto-detect these addresses, or if the |
| # auto-detected values are incorrect. Note that the list of addresses is sent |
| # in CER or CEA message, so one should pay attention to this parameter if some |
| # adresses should be kept hidden. |
| #ListenOn = "127.0.0.1"; |
| |
| Port = {{ .Values.hss.ports.s6a }}; |
| SecPort = {{ .Values.hss.ports.secs6a }}; |
| |
| LoadExtension = "acl_wl.fdx" : "./conf/acl.conf"; |
| |
| # -------- Extensions --------- |
| |
| #LoadExtension = "/usr/local/lib/freeDiameter/_sample.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/app_acct.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/app_diameap.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/app_radgw.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/app_redirect.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/app_sip.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dbg_interactive.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dbg_monitor.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dbg_msg_dumps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dbg_msg_timings.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dbg_rt.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_3gpp2_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_CreditControl.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_CxDx.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Gx.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_NAS.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Ro.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Rx.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_S6mS6n.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_SGd.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_SLh.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Sd.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Sh.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_T4.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_T6aT6bT7.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Tsp.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_dcca.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_dcca_3gpp.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_dcca_starent.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_draftload_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_eap.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_etsi283034_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_legacy_xml.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_mip6a.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_mip6i.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_nas_mipv6.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_nasreq.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4004_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4006bis_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4072_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4590_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5447_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5580_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5777_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5778_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc6734_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc6942_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7155_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7683_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7944_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_sip.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29061_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29128_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29154_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29173_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29212_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29214_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29215_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29217_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29229_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29272_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29273_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29329_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29336_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29337_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29338_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29343_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29344_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29345_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29368_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29468_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts32299_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_busypeers.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_default.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_ereg.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_ignore_dh.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_load_balance.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_randomize.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/rt_redirect.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_acct.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_app.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_hss.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_netemul.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_rt_any.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/test_sip.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Rf.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6as6d.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6t.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6c.fdx"; |
| |
| |
| # Load RFC4072 dictionary objects |
| #LoadExtension = "dict_eap.fdx"; |
| |
| # Load the Diameter EAP server extension (requires diameap.conf) |
| #LoadExtension = "app_diameap.fdx" : "diameap.conf"; |
| |
| # Load the Accounting Server extension (requires app_acct.conf) |
| #LoadExtension = "app_acct.fdx" : "app_acct.conf"; |
| |
| # -------- Peers --------- |
| |
| # The framework will actively attempt to establish and maintain a connection |
| # with the peers listed here. |
| # For only accepting incoming connections, see the acl_wl.fx extension. |
| |
| #ConnectPeer = "peer1.localdomain" { ConnectTo = "127.0.0.1"; }; |
| hss.json: | |
| {"common": { |
| "fdcfg": "conf/hss.conf", |
| "originhost": "HSS_IDENTITY", |
| "originrealm": "HSS_REALM" |
| }, |
| "hss": { |
| "gtwhost": "*", |
| "gtwport" : 9080, |
| "restport" : 9081, |
| "casssrv": "CASSANDRA_ADDR", |
| "cassusr": "root", |
| "casspwd": "root", |
| "cassdb" : "vhss", |
| "randv" : true, |
| "optkey" : "63bfa50ee6523365ff14c1f45f88737d", |
| "reloadkey" : true |
| } |
| } |
| launch.sh: | |
| #!/bin/bash |
| |
| cd /opt/c3po/hss |
| cp /etc/hss/conf/{acl.conf,hss.json,hss.conf} conf |
| |
| HSS_HOST=$(hostname) |
| HSS_DOMAIN=$(dnsdomainname) |
| CASSANDRA_ADDR=${CASSANDRA_ADDR:-localhost} |
| |
| # from hss.json |
| sed -i "s/HSS_IDENTITY/$HSS_HOST.$HSS_DOMAIN/g" conf/hss.json |
| sed -i "s/HSS_REALM/$HSS_DOMAIN/g" conf/hss.json |
| sed -i "s/CASSANDRA_ADDR/$CASSANDRA_ADDR/g" conf/hss.json |
| |
| # from hss.conf |
| sed -i "s/HSS_IDENTITY/$HSS_HOST.$HSS_DOMAIN/g" conf/hss.conf |
| sed -i "s/HSS_REALM/$HSS_DOMAIN/g" conf/hss.conf |
| sed -i "s/HSS_HOST/$HSS_HOST/g" conf/hss.conf |
| |
| # If necessary, calculate the OPc value for each UE (User Equipment). |
| #./bin/hss -j conf/hss.json --onlyloadkey |
| |
| cd conf |
| make_certs.sh $(hostname) $(dnsdomainname) |
| cd .. |
| |
| # finally, launch |
| hss -j conf/hss.json |
| --- |
| apiVersion: v1 |
| kind: ConfigMap |
| metadata: |
| name: mme |
| data: |
| launch.sh: | |
| #!/bin/bash |
| |
| cd /opt/c3po/mme/bin |
| cp /etc/mme/conf/{vbsm_cfg.txt,vbfd.conf} . |
| |
| # from vbsm_cfg.txt |
| SGW_S11_IP=${SGW_S11_IP:-sgw.localdomain} |
| ENB_S1AP_IP=${ENB_S1AP_IP:-enb1.localdomain} |
| ENB_S1AP_PORT=${ENB_S1AP_PORT:-36412} |
| MME_ETH0_IP=${MME_ETH0_IP:-0.0.0.0} |
| |
| # from vbfd.conf |
| CONNECT_PEER=${CONNECT_PEER:-hss.localdomain} |
| HSS_S6A_IP=${HSS_S6A_IP:-hss.localdomain} |
| HSS_PORT=${HSS_PORT:-3868} |
| VAR_HSS_REALM=${VAR_HSS_REALM:-openair4G.eur} |
| |
| |
| sed -i "s/SGW_S11_IP/$(dig $SGW_S11_IP +short)/g" vbsm_cfg.txt |
| sed -i "s/ENB_S1AP_IP/$ENB_S1AP_IP/g" vbsm_cfg.txt |
| sed -i "s/ENB_S1AP_PORT/$ENB_S1AP_PORT/g" vbsm_cfg.txt |
| sed -i "s/MME_ETH0_IP/$MME_ETH0_IP/g" vbsm_cfg.txt |
| sed -i "s/VAR_HSS_HOST/$CONNECT_PEER/g" vbsm_cfg.txt |
| sed -i "s/VAR_HSS_REALM/$VAR_HSS_REALM/g" vbsm_cfg.txt |
| |
| |
| MME_HOST=$(hostname) |
| MME_DOMAIN=$(dnsdomainname) |
| sed -i "s/CONNECT_PEER/$CONNECT_PEER/g" vbfd.conf |
| sed -i "s/HSS_S6A_IP/$HSS_S6A_IP/g" vbfd.conf |
| sed -i "s/HSS_PORT/$HSS_PORT/g" vbfd.conf |
| sed -i "s/MME_IDENTITY/$MME_HOST.$MME_DOMAIN/g" vbfd.conf |
| sed -i "s/MME_REALM/$MME_DOMAIN/g" vbfd.conf |
| sed -i "s/MME_HOST/$MME_HOST/g" vbfd.conf |
| |
| # generate the certs |
| # ./make_certs.sh mme localdomain |
| ./make_certs.sh $MME_HOST $MME_DOMAIN |
| |
| |
| # finally, launch |
| ./vb_acc |
| vbfd.conf: | |
| # -------- Test configuration --------- |
| |
| # Identity = "<diameter_host>.<diameter_realm>"; |
| Identity = "MME_IDENTITY"; |
| Realm = "MME_REALM"; |
| # Port = 3868; |
| # SecPort = 3869; |
| |
| ConnectPeer = "CONNECT_PEER" { ConnectTo = "HSS_S6A_IP"; No_TLS; port = HSS_PORT; }; |
| |
| # TLS_Cred = "<diameter_host>.cert.pem", "<diameter_host>.key.pem"; |
| TLS_Cred = "MME_HOST.cert.pem", |
| "MME_HOST.key.pem"; |
| TLS_CA = "cacert.pem"; |
| |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_3gpp2_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_CreditControl.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_base_rfc6733.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_draftload_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_etsi283034_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4004_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4006bis_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4072_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc4590_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5447_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5580_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5777_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc5778_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc6734_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc6942_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7155_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7683_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_rfc7944_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29061_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29128_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29154_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29173_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29212_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29214_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29215_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29217_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29229_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29272_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29273_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29329_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29336_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29337_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29338_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29343_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29344_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29345_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29368_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts29468_avps.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_ts32299_avps.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_CxDx.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Gx.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_NAS.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Rf.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Ro.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Rx.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6as6d.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6c.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_S6mS6n.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_S6t.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_S9.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_SGd.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_SLh.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Sd.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Sh.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_T4.fdx"; |
| LoadExtension = "/usr/local/lib/freeDiameter/dict_T6aT6bT7.fdx"; |
| #LoadExtension = "/usr/local/lib/freeDiameter/dict_Tsp.fdx"; |
| vbsm_cfg.txt: | |
| # Configuration file for MME |
| |
| ##### NOTE: Please Do NOT change the order of the parameters ##### |
| |
| # EGTP related |
| VBSM_EG_DFLT_PORT 2123 # EGTP Default port |
| VBSM_EG_NONDFLT_PORT 2124 # EGTP Non Default port |
| VBSM_EG_S10_NONDFLT_PORT 2125 # EGTP Non Default |
| VBSM_EG_S3_NONDFLT_PORT 2126 # EGTP Non Default port for S3 interface towards SGSN |
| # port for S10 |
| VBSM_EG_DFLT_HOST_NAME "sutlej.ccin.ccpu.com" # EGTP host name |
| |
| |
| # E-NodeB related |
| VBSM_ENB_ADDR_1 "ENB_S1AP_IP" # IP address of eNodeB |
| VBSM_ENB_PORT_1 "ENB_S1AP_PORT" # eNodeB port |
| #VBSM_ENB_ADDR_2 "172.26.20.180" # IP address of eNodeB |
| #VBSM_ENB_PORT_2 36422 # eNodeB port |
| |
| # MME related |
| VBSM_MME_IPADDR "MME_ETH0_IP" # MME IP address |
| VBSM_MME_S1AP_IPADDR "MME_ETH0_IP" # MME IP address associated with the S1AP interface |
| VBSM_MME_EGTP_IPADDR "MME_ETH0_IP" # MME IP address associated with the EGTP interface |
| VBSM_MME_SCTP_PORT {{ .Values.mme.ports.s1ap }} # MME SCTP port |
| |
| VBSM_SGW_IPADDR "SGW_S11_IP" # SGW IP address |
| VBSM_PGW_IPADDR "192.168.1.105" # PDN-GW IP address |
| |
| VBSM_UE_NUM 1000 # Support 1000 UE's |
| VBSM_SCTP_UDP_SERV_TYPE 0 #service type,default 0 SCTP |
| |
| # Debug mask to be set; each represent |
| #different debug masks to be set (1 and 0 to unset) |
| #in the form |LVB_DBGMASK_INFO|LVB_DBGMASK_ERROR|LVB_DBGMASK_TRC|LVB_DBGMASK_MEM |
| |
| VBSM_MME_DBG_MASK 1111 |
| VBSM_DBG_MASK 1111 |
| VBSM_NW_INIATED_DETACH_TIMER 1000 |
| |
| VBSM_MCC_DIG1 3 |
| VBSM_MCC_DIG2 0 |
| VBSM_MCC_DIG3 2 |
| |
| VBSM_MNC_DIG1 7 |
| VBSM_MNC_DIG2 2 |
| VBSM_MNC_DIG3 0 |
| |
| # Target PLMN ID format [ MCC + MNC], + is concatination operator |
| # If MNC has two digits, the last charater shall be 'f' |
| # Valid Configurations: 11223f, 112345. |
| VBSM_TARGET_MME_PLMN_ID 31310f |
| VBSM_TARGET_MME_IP_ADDR "192.25.1.100" |
| |
| VBSM_T3412 32 |
| |
| VBSM_SGSN_IP_ADDR "192.25.1.195" |
| |
| |
| VBSM_SGSN_PLMN_ID 31311f |
| |
| VBSM_FD_CFG "vbfd.conf" |
| VBSM_HSS_HOST "VAR_HSS_HOST" |
| VBSM_HSS_REALM "VAR_HSS_REALM" |
| |
| # set VBSM_DISABLE_EPC_DNS 0 - enable DNS, 1 - disable DNS |
| VBSM_DISABLE_EPC_DNS 1 |
| VBSM_DISABLE_EIA0 1 |
| VBSM_REL_CAP 1 |
| VBSM_MME_NAME "vmmestandalone" |
| VBSM_S1C_SCTP_INSTREAMS 10 |
| VBSM_S1C_SCTP_OUTSTREAMS 10 |
| VBSM_MAX_ENB 2 |
| VBSM_NO_OFGUMMEIS 1 |
| VBSM_MMECODE 1 |
| VBSM_MMEGRPID 1 |
| VBSM_NO_OF_TAI 1 |
| VBSM_TAI_LIST {{"{{ 1,2,0,8,0,1,1 }}"}} |
| |
| VBSM_SMS_ROUTER_HOST "smsrouter.test3gpp.net" |
| VBSM_SMS_ROUTER_REALM "test3gpp.net" |