blob: 944dd9e03825d57eda146272f375fbcc04126c5c [file] [log] [blame]
---
# Copyright 2019 Ciena Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# IMAGE SELECTION
# ---------------
# By default no defaults are set and the image tags specified in the helm
# charts will be used. If you would like to use the images generated from the
# HEAD of the "master" git branches, then uncomment this below block and
# set "<VALUE>" to "master". Similarly, if you want to use the images
# generated from the HEAD of the "voltha-2.1" git branches, then uncomment
# this block and replace "<VALUE>" with "voltha-2.1".
defaults:
image_tag: master
image_pullPolicy: Always
# OFAGENT IMPLEMENTATION
# ----------------------
# There are currently two implementations of OFAGENT: the original written in
# Python and the reimplementation written in Go. The variable `use_ofagent_go`
# can be used to optionally select the implementation. The Go version is the
# version to be part of the official release and is the default. The Python
# verison has been deprecated and is no longer being actively workes, but is
# being left as an option for this release.
#
# Along with this change you will also may need to set the Docker image
# information below (search for START_OFAGENT_GO).
use_ofagent_go: true
# OPENONU-ADAPTER IMPLEMENTATION
# ------------------------------
# There are currently two implementations of OPENONU-ADAPTER: the original
# written in Python and the reimplementation written in Go. The variable
# `use_openonu_adapter_go` can be used to optionally use the new Go
# implementation. This is done by setting that value to `true`.
#
# Along with this change you will also may need to set the Docker image
# information below (search for START_OPENONU_ADAPTER_GO).
use_openonu_adapter_go: false
images:
onos:
repository: voltha/voltha-onos
# IMAGE_SELECTION
# ---------------
# The helm chart used to deploy ONOS is the public ONOS helm chart so,
# there is a need to specify the exact image repository and image tag.
# If you would like to use the "master", "voltha-2.1", or other image
# just replace the "tag" value below.
tag: master
# IMAGE_SELECTION
# ---------------
# Below are a list of all the images utilized by kind-voltha. This list is
# provided as a conveinence if you would like to override on a per image
# basis. If you are using the defaults, master, or voltha-2.1 branch there
# is no need to utilize this list.
# adapter_open_olt:
# repository: voltha/voltha-openolt-adapter
# tag: 2.1.1
# adapter_open_onu:
# repository: voltha/voltha-openonu-adapter
# tag: 2.1.0
# adapter_simulated_olt:
# repository: voltha/voltha-adapter-simulated-olt
# tag: 2.1.1
# adapter_simulated_onu:
# repository: voltha/voltha-adapter-simulated-onu
# tag: 2.1.1
# bbsim:
# repository: voltha/bbsim
# tag: master
# START_OFAGENT_GO - Comment the following block to use the Python implementation
# of the ofagent
# ofagent_go:
# repository: voltha/voltha-ofagent-go
# tag: master
# END_OFAGENT_GO
# ofagent_py:
# repository: voltha/voltha-ofagent-py
# tag: 2.1.1
# rw_core:
# repository: voltha/voltha-rw-core
# tag: 2.1.1
# START_OPENONU_ADAPTER_GO - Uncomment the following block to use the Go implementation
# of the openonu-adapter
# adapter_open_onu_go:
# repository: voltha-openonu-adapter-go
# tag: master
# END_OPENONU_ADAPTER_GO
deployments:
etcdOperator: true
backupOperator: false
restoreOperator: false
voltha-etcd-cluster:
clusterSize: 1
autoCompactionRetention: 1
kafka:
configurationOverrides:
"default.replication.factor": 1
"offsets.topic.replication.factor": 1
replicas: 1
onos_env:
- name: POD_IP
valueFrom:
fieldRef:
fieldPath: status.podIP
- name: NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
- name: ONOS_APPS
value: "drivers,openflow-base,hostprovider"
# No persistent volume in Atomix to have clean state for each re-deploy of ONOS
atomix:
persistence:
enabled: false
# Customization for BBSIM
kafka_broker: 'voltha-kafka.voltha.svc.cluster.local:9092'
pon: 1
onu: 1
# SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
# The VOLTHA charts have support for adding extra labels to deployments and
# pods. These extra labels can be used to integrate with other utilities
# such as kube-monkey to add a bit of chaos to the cluster. Below are some
# settings that can be uncommented to opt-in VOLTHA deployments/pods to
# kube-monkey. For example, if you want ALL deployments and pods to opt-in
# then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
# If you want to be more selected then comment the blocks that pertain to the
# targets you care about.
# extra_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# extra_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# rw_core_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# rw_core_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# ofagent_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# ofagent_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openolt_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openolt_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openonu_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# openonu_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simolt_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simolt_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simonu_deployment_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1
#
# simonu_pod_labels:
# kube-monkey/enabled: enabled
# kube-monkey/identifier: monkey-victim
# kube-monkey/mtbf: 1
# kube-monkey/kill-mode: fixed
# kube-monkey/kill-value: 1