full-values.yaml - kind-voltha - Gitiles

 ---
 # Copyright 2019 Ciena Corporation
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # IMAGE SELECTION
 # ---------------
 # By default no defaults are set and the image tags specified in the helm
 # charts will be used. If you would like to use the images generated from the
 # HEAD of the "master" git branches, then uncomment this below block and
 # set "<VALUE>" to "master". Similarly, if you want to use the images
 # generated from the HEAD of the "voltha-2.1" git branches, then uncomment
 # this block and replace "<VALUE>" with "voltha-2.1".
 defaults:
   image_tag: master
   image_pullPolicy: Always

 private_etcd_cluster: false
 private_kafka_cluster: false

 # OPENONU-ADAPTER IMPLEMENTATION
 # ------------------------------
 # There are currently two implementations of OPENONU-ADAPTER: the original
 # written in Python and the reimplementation written in Go. The variable
 # `use_openonu_adapter_go` can be used to optionally use the new Go
 # implementation. This is done by setting that value to `true`.
 #
 # Along with this change you will also may need to set the Docker image
 # information below (search for START_OPENONU_ADAPTER_GO).
 use_openonu_adapter_go: false

 images:
   onos:
     repository: voltha/voltha-onos
     # IMAGE_SELECTION
     # ---------------
     # The helm chart used to deploy ONOS is the public ONOS helm chart so,
     # there is a need to specify the exact image repository and image tag.
     # If you would like to use the "master", "voltha-2.1", or other image
     # just replace the "tag" value below.
     tag: master

 # IMAGE_SELECTION
 # ---------------
 # Below are a list of all the images utilized by kind-voltha. This list is
 # provided as a conveinence if you would like to override on a per image
 # basis. If you are using the defaults, master, or voltha-2.1 branch there
 # is no need to utilize this list.
 #  adapter_open_olt:
 #    repository: voltha/voltha-openolt-adapter
 #    tag: 2.1.1
 #  adapter_open_onu:
 #    repository: voltha/voltha-openonu-adapter
 #    tag: 2.1.0
 #  adapter_simulated_olt:
 #    repository: voltha/voltha-adapter-simulated-olt
 #    tag: 2.1.1
 #  adapter_simulated_onu:
 #    repository: voltha/voltha-adapter-simulated-onu
 #    tag: 2.1.1
 #  bbsim:
 #    repository: voltha/bbsim
 #    tag: master
 #  ofagent:
 #    repository: voltha/voltha-ofagent-go
 #    tag: master
 #  rw_core:
 #    repository: voltha/voltha-rw-core
 #    tag: 2.1.1
 # START_OPENONU_ADAPTER_GO - Uncomment the following block to use the
 # Go implementation of the openonu-adapter
 #  adapter_open_onu_go:
 #    repository: voltha-openonu-adapter-go
 #    tag: master
 # END_OPENONU_ADAPTER_GO

 etcd:
   replicas: 3
   extraEnv:
     - name: ETCD_AUTO_COMPACTION_RETENTION
       value: "1"
     - name: ETCD_SNAPSHOT_COUNT
       value: "100000"
     - name: ETCD_HEARTBEAT_INTERVAL
       value: "100"
     - name: ETCD_ELECTION_TIMEOUT
       value: "1000"
     - name: ETCD_MAX_SNAPSHOTS
       value: "5"
     - name: ETCD_QUOTA_BACKEND_BYTES
       value: "0"
     - name: ETCD_MAX_REQUEST_BYTES
       value: "1572864"
     - name: ETCD_GRPC_KEEPALIVE_MIN_TIME
       value: "5s"
     - name: ETCD_GRPC_KEEPALIVE_TIMEOUT
       value: "5s"
     - name: ETCD_DEBUG
       value: "false"

 kafka:
   zookeeper:
     replicaCount: 3
     persistence:
       enabled: false
   replicas: 3
   persistence:
     enabled: false
   envOverrides:
     KAFKA_LOG4J_ROOT_LOGLEVEL: ERROR
     KAFKA_TOOLS_LOG4J_LOGLEVEL: ERROR
     # yamllint disable-line rule:line-length
     KAFKA_LOG4J.LOGGERS: "kafka.zookeeper=ERROR,state.change.logger=ERROR,kafka=ERROR,kafka.controller=ERROR"
     KAFKA_LOG_RETENTION_HOURS: 1
     KAFKA_DEFAULT_REPLICATION_FACTOR: 1
     KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1

 # voltha:
 #   fullNameOverride: voltha

 # open-olt:
 #   fullNameOverride: voltha-adapter-openolt

 # open-onu:
 #   fullNameOverride: voltha-adapter-openonu

 onos:
   image:
     repository: voltha/voltha-onos
     tag: master
     pullPolicy: Always
   onos_env:
     - name: POD_IP
       valueFrom:
       fieldRef:
         fieldPath: status.podIP
     - name: NAMESPACE
       valueFrom:
       fieldRef:
         fieldPath: metadata.namespace
     - name: ONOS_APPS
       value: "drivers,openflow-base,hostprovider"
   # No persistent volume in Atomix to have clean state for each re-deploy of ONOS
   atomix:
     persistence:
       enabled: false

 # Customization for BBSIM
 bbsim:
   nni: 1
   pon: 1
   onu: 1
   sadisFormat: "att"
   kafkaEventTopic: "bbsim"
   enableEvents: false

 # SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
 # The VOLTHA charts have support for adding extra labels to deployments and
 # pods. These extra labels can be used to integrate with other utilities
 # such as kube-monkey to add a bit of chaos to the cluster. Below are some
 # settings that can be uncommented to opt-in VOLTHA deployments/pods to
 # kube-monkey. For example, if you want ALL deployments and pods to opt-in
 # then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
 # If you want to be more selected then comment the blocks that pertain to the
 # targets you care about.

 # extra_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # extra_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # rw_core_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # rw_core_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # ofagent_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # ofagent_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # openolt_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # openolt_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # openonu_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # openonu_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # simolt_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # simolt_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # simonu_deployment_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
 #
 # simonu_pod_labels:
 #   kube-monkey/enabled: enabled
 #   kube-monkey/identifier: monkey-victim
 #   kube-monkey/mtbf: 1
 #   kube-monkey/kill-mode: fixed
 #   kube-monkey/kill-value: 1
	---
	# Copyright 2019 Ciena Corporation
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# IMAGE SELECTION
	# ---------------
	# By default no defaults are set and the image tags specified in the helm
	# charts will be used. If you would like to use the images generated from the
	# HEAD of the "master" git branches, then uncomment this below block and
	# set "<VALUE>" to "master". Similarly, if you want to use the images
	# generated from the HEAD of the "voltha-2.1" git branches, then uncomment
	# this block and replace "<VALUE>" with "voltha-2.1".
	defaults:
	image_tag: master
	image_pullPolicy: Always

	private_etcd_cluster: false
	private_kafka_cluster: false

	# OPENONU-ADAPTER IMPLEMENTATION
	# ------------------------------
	# There are currently two implementations of OPENONU-ADAPTER: the original
	# written in Python and the reimplementation written in Go. The variable
	# `use_openonu_adapter_go` can be used to optionally use the new Go
	# implementation. This is done by setting that value to `true`.
	#
	# Along with this change you will also may need to set the Docker image
	# information below (search for START_OPENONU_ADAPTER_GO).
	use_openonu_adapter_go: false

	images:
	onos:
	repository: voltha/voltha-onos
	# IMAGE_SELECTION
	# ---------------
	# The helm chart used to deploy ONOS is the public ONOS helm chart so,
	# there is a need to specify the exact image repository and image tag.
	# If you would like to use the "master", "voltha-2.1", or other image
	# just replace the "tag" value below.
	tag: master

	# IMAGE_SELECTION
	# ---------------
	# Below are a list of all the images utilized by kind-voltha. This list is
	# provided as a conveinence if you would like to override on a per image
	# basis. If you are using the defaults, master, or voltha-2.1 branch there
	# is no need to utilize this list.
	# adapter_open_olt:
	# repository: voltha/voltha-openolt-adapter
	# tag: 2.1.1
	# adapter_open_onu:
	# repository: voltha/voltha-openonu-adapter
	# tag: 2.1.0
	# adapter_simulated_olt:
	# repository: voltha/voltha-adapter-simulated-olt
	# tag: 2.1.1
	# adapter_simulated_onu:
	# repository: voltha/voltha-adapter-simulated-onu
	# tag: 2.1.1
	# bbsim:
	# repository: voltha/bbsim
	# tag: master
	# ofagent:
	# repository: voltha/voltha-ofagent-go
	# tag: master
	# rw_core:
	# repository: voltha/voltha-rw-core
	# tag: 2.1.1
	# START_OPENONU_ADAPTER_GO - Uncomment the following block to use the
	# Go implementation of the openonu-adapter
	# adapter_open_onu_go:
	# repository: voltha-openonu-adapter-go
	# tag: master
	# END_OPENONU_ADAPTER_GO

	etcd:
	replicas: 3
	extraEnv:
	- name: ETCD_AUTO_COMPACTION_RETENTION
	value: "1"
	- name: ETCD_SNAPSHOT_COUNT
	value: "100000"
	- name: ETCD_HEARTBEAT_INTERVAL
	value: "100"
	- name: ETCD_ELECTION_TIMEOUT
	value: "1000"
	- name: ETCD_MAX_SNAPSHOTS
	value: "5"
	- name: ETCD_QUOTA_BACKEND_BYTES
	value: "0"
	- name: ETCD_MAX_REQUEST_BYTES
	value: "1572864"
	- name: ETCD_GRPC_KEEPALIVE_MIN_TIME
	value: "5s"
	- name: ETCD_GRPC_KEEPALIVE_TIMEOUT
	value: "5s"
	- name: ETCD_DEBUG
	value: "false"

	kafka:
	zookeeper:
	replicaCount: 3
	persistence:
	enabled: false
	replicas: 3
	persistence:
	enabled: false
	envOverrides:
	KAFKA_LOG4J_ROOT_LOGLEVEL: ERROR
	KAFKA_TOOLS_LOG4J_LOGLEVEL: ERROR
	# yamllint disable-line rule:line-length
	KAFKA_LOG4J.LOGGERS: "kafka.zookeeper=ERROR,state.change.logger=ERROR,kafka=ERROR,kafka.controller=ERROR"
	KAFKA_LOG_RETENTION_HOURS: 1
	KAFKA_DEFAULT_REPLICATION_FACTOR: 1
	KAFKA_OFFSETS_TOPIC_REPLICATION_FACTOR: 1

	# voltha:
	# fullNameOverride: voltha

	# open-olt:
	# fullNameOverride: voltha-adapter-openolt

	# open-onu:
	# fullNameOverride: voltha-adapter-openonu

	onos:
	image:
	repository: voltha/voltha-onos
	tag: master
	pullPolicy: Always
	onos_env:
	- name: POD_IP
	valueFrom:
	fieldRef:
	fieldPath: status.podIP
	- name: NAMESPACE
	valueFrom:
	fieldRef:
	fieldPath: metadata.namespace
	- name: ONOS_APPS
	value: "drivers,openflow-base,hostprovider"
	# No persistent volume in Atomix to have clean state for each re-deploy of ONOS
	atomix:
	persistence:
	enabled: false

	# Customization for BBSIM
	bbsim:
	nni: 1
	pon: 1
	onu: 1
	sadisFormat: "att"
	kafkaEventTopic: "bbsim"
	enableEvents: false

	# SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
	# The VOLTHA charts have support for adding extra labels to deployments and
	# pods. These extra labels can be used to integrate with other utilities
	# such as kube-monkey to add a bit of chaos to the cluster. Below are some
	# settings that can be uncommented to opt-in VOLTHA deployments/pods to
	# kube-monkey. For example, if you want ALL deployments and pods to opt-in
	# then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
	# If you want to be more selected then comment the blocks that pertain to the
	# targets you care about.

	# extra_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# extra_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# rw_core_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# rw_core_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# ofagent_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# ofagent_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# openolt_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# openolt_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# openonu_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# openonu_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# simolt_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# simolt_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# simonu_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	# simonu_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1