| #!/bin/bash |
| # Copyright 2019 Ciena Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| set -f |
| TOTAL_START_TIME=$(date +%s) |
| |
| FANCY=${FANCY:-1} |
| if [ "$TERM X" == " X" ]; then |
| FANCY=0 |
| fi |
| |
| # trap ctrl-c and call ctrl_c() |
| trap ctrl_c INT |
| |
| function ctrl_c() { |
| echo -en $CNORM |
| echo "" |
| echo "ctrl-c trapped" |
| echo "Thank you for trying 'voltha up'" |
| exit |
| } |
| |
| VOLTCTL_VERSION=${VOLTCTL_VERSION:-latest} |
| KIND_VERSION=${KIND_VERSION:-v0.5.1} |
| VK_RELEASE=${VK_RELEASE:-master} |
| |
| BLACK= |
| RED= |
| GREEN= |
| YELLOW= |
| BLUE= |
| MAGENTA= |
| CYAN= |
| WHITE= |
| BOLD= |
| NORMAL= |
| ERROR= |
| CEOL= |
| CNORM= |
| CIVIS= |
| if [ $FANCY -eq 1 ]; then |
| BLACK=$(tput setaf 0) |
| RED=$(tput setaf 1) |
| GREEN=$(tput setaf 2) |
| YELLOW=$(tput setaf 3) |
| BLUE=$(tput setaf 4) |
| MAGENTA=$(tput setaf 5) |
| CYAN=$(tput setaf 6) |
| WHITE=$(tput setaf 7) |
| BOLD=$(tput bold) |
| NORMAL=$(tput sgr0) |
| ERROR="\xe2\x9c\x97\x20" |
| CEOL=$(tput el) |
| CNORM=$(tput cnorm) |
| CIVIS=$(tput civis) |
| fi |
| |
| TYPE=${TYPE:-minimal} |
| NAME=${NAME:-$TYPE} |
| |
| ENABLE_ONOS_EXTRANEOUS_RULES=${ENABLE_ONOS_EXTRANEOUS_RULES:-no} |
| WITH_TIMINGS=${WITH_TIMINGS:-no} |
| WITH_BBSIM=${WITH_BBSIM:-no} |
| WITH_RADIUS=${WITH_RADIUS:-no} |
| WITH_EAPOL=${WITH_EAPOL:-yes} |
| WITH_DHCP=${WITH_DHCP:-yes} |
| WITH_IGMP=${WITH_IGMP:-no} |
| WITH_ONOS=${WITH_ONOS:-yes} |
| WITH_CHAOS=${WITH_CHAOS:-no} |
| WITH_ADAPTERS=${WITH_ADAPTERS:-yes} |
| WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-no} |
| WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes} |
| WITH_PORT_FORWARDS=${WITH_PORT_FORWARDS:-yes} |
| ONLY_ONE=${ONLY_ONE:-yes} |
| CONFIG_SADIS=${CONFIG_SADIS:-no} # yes | no | file | bbsim | URL |
| SADIS_SUBSCRIBERS=${SADIS_SUBSCRIBERS:-http://bbsim.voltha.svc:50074/v2/subscribers/%s} |
| SADIS_BANDWIDTH_PROFILES=${SADIS_BANDWIDTH_PROFILES:-http://bbsim.voltha.svc:50074/v2/bandwidthprofiles/%s} |
| SADIS_CFG=${SADIS_CFG:-onos-files/onos-sadis-sample.json} |
| INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no} |
| JUST_K8S=${JUST_K8S:-no} |
| DEPLOY_K8S=${DEPLOY_K8S:-yes} |
| INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes} |
| INSTALL_HELM=${INSTALL_HELM:-yes} |
| UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes} |
| WAIT_ON_DOWN=${WAIT_ON_DOWN:-yes} |
| WAIT_TIMEOUT=${WAIT_TIMEOUT:-30m} |
| VOLTHA_DOWN_ON_TIMEOUT=${VOLTHA_DOWN_ON_TIMEOUT:-no} |
| VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN} |
| VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha} |
| VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest} |
| VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim} |
| VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated} |
| VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt} |
| VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu} |
| VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest} |
| ONOS_CHART=${ONOS_CHART:-onf/onos} |
| ONOS_CHART_VERSION=${ONOS_CHART_VERSION:-latest} |
| EXTRA_HELM_INSTALL_ARGS=${EXTRA_HELM_INSTALL_ARGS:-} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| NUM_OF_BBSIM=${NUM_OF_BBSIM:-1} |
| MAX_NUM_OF_BBSIM=10 |
| |
| HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no") |
| HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"]) |
| HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"]) |
| if [ $HOSTARCH == "x86_64" ]; then |
| HOSTARCH="amd64" |
| fi |
| |
| # check number (range) of bbsim, max bbsim must not exceed 10 instances! |
| # note: instances will be numbered from 0 to 9 |
| if [ "$1" == "up" ]; then |
| if [ "$NUM_OF_BBSIM" -lt 1 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is less than 1${NORMAL}" |
| exit 1 |
| fi |
| if [ "$NUM_OF_BBSIM" -gt $MAX_NUM_OF_BBSIM ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is greater than $MAX_NUM_OF_BBSIM${NORMAL}" |
| exit 1 |
| fi |
| fi |
| # Verify TYPE setting |
| if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}" |
| exit 1 |
| fi |
| |
| function parseDuration() { |
| local DUR=$1 |
| local RESULT=0 |
| local TERMS=$(echo $DUR | sed -Ee 's/([sSmMhHdD])/\1 /g' -e 's/,$//g') |
| for TERM in $TERMS; do |
| local VALUE=$(echo $TERM | sed -Ee 's/([0-9]+)[sSmMhHdD]/\1/') |
| local UNIT=$(echo $TERM | sed -Ee 's/[0-9]+([sSmMhHdD])/\1/') |
| case $UNIT in |
| s|S) |
| RESULT=$(($RESULT + $VALUE)) ;; |
| m|M) |
| RESULT=$(($RESULT + ($VALUE * 60))) ;; |
| h|H) |
| RESULT=$(($RESULT + ($VALUE * 3600))) ;; |
| d|D) |
| RESULT=$(($RESULT + ($VALUE * 86400))) ;; |
| *) ;; |
| esac |
| done |
| echo $RESULT |
| } |
| |
| function doTimeout() { |
| local MSG=$1 |
| 2>&1 echo -e "\n${RED}${BOLD}${ERROR}TIMEOUT:${NORMAL}${RED} Operation timed out after '$WAIT_TIMEOUT': $MSG" |
| exit 125 |
| } |
| |
| function get_service_ep() { |
| local NS=$1 |
| local NAME=$2 |
| kubectl -n $NS get service $NAME -o json | jq -r '.spec.clusterIP + ":" + (.spec.ports[0].port|tostring)' |
| } |
| |
| # Used to verify configuration values are set to "yes" or "no" value or convert |
| # equivalents to "yes" or "no" |
| function verify_yes_no() { |
| local VAR=$1 |
| local VAL=$(eval echo \$$VAR) |
| if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$VAL:") -eq 0 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}" |
| echo "INVALID" |
| return 1 |
| fi |
| if [ $(echo ":y:yes:true:1:" | grep -ic ":$VAL:") -eq 1 ]; then |
| echo "yes" |
| else |
| echo "no" |
| fi |
| return 0 |
| } |
| |
| ALL_YES_NO="\ |
| ENABLE_ONOS_EXTRANEOUS_RULES \ |
| WITH_TIMINGS \ |
| WITH_BBSIM \ |
| WITH_RADIUS \ |
| WITH_EAPOL \ |
| WITH_DHCP \ |
| WITH_IGMP \ |
| WITH_ONOS \ |
| WITH_CHAOS \ |
| WITH_ADAPTERS \ |
| WITH_SIM_ADAPTERS \ |
| WITH_OPEN_ADAPTERS \ |
| WITH_PORT_FORWARDS \ |
| JUST_K8S \ |
| DEPLOY_K8S \ |
| INSTALL_ONOS_APPS \ |
| INSTALL_KUBECTL \ |
| INSTALL_HELM \ |
| UPDATE_HELM_REPOS \ |
| WAIT_ON_DOWN \ |
| ONLY_ONE \ |
| VOLTHA_DOWN_ON_TIMEOUT \ |
| " |
| |
| ALL_OPTIONS="\ |
| NAME \ |
| TYPE \ |
| $ALL_YES_NO \ |
| WAIT_TIMEOUT \ |
| VOLTHA_LOG_LEVEL \ |
| VOLTHA_CHART \ |
| VOLTHA_CHART_VERSION \ |
| VOLTHA_BBSIM_CHART \ |
| VOLTHA_BBSIM_CHART_VERSION \ |
| NUM_OF_BBSIM \ |
| VOLTHA_ADAPTER_SIM_CHART \ |
| VOLTHA_ADAPTER_SIM_CHART_VERSION \ |
| VOLTHA_ADAPTER_OPEN_OLT_CHART \ |
| VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \ |
| VOLTHA_ADAPTER_OPEN_ONU_CHART \ |
| VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \ |
| ONOS_CHART \ |
| ONOS_CHART_VERSION \ |
| ONOS_API_PORT \ |
| ONOS_SSH_PORT \ |
| CONFIG_SADIS \ |
| SADIS_CFG \ |
| VOLTHA_API_PORT \ |
| VOLTHA_SSH_PORT \ |
| VOLTHA_ETCD_PORT \ |
| VOLTHA_KAFKA_PORT \ |
| VK_RELEASE \ |
| KIND_VERSION \ |
| VOLTCTL_VERSION \ |
| " |
| |
| # Iterate over yes/no configuration options and validate |
| for VAR in $ALL_YES_NO; do |
| eval $VAR=$(verify_yes_no $VAR) |
| if [ "$(eval echo \$$VAR)" == "INVALID" ]; then |
| exit 1; |
| fi |
| done |
| |
| # Check for prerequiste tools |
| TOOLS="curl sed jq" |
| if [ $DEPLOY_K8S == "yes" ]; then |
| TOOLS+=" docker" |
| fi |
| NOT_FOUND="" |
| for T in $TOOLS; do |
| if [ -z "$(which $T)" ]; then |
| NOT_FOUND+=" $T" |
| fi |
| done |
| |
| if [ ! -z "$NOT_FOUND" ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} The following required tools where not found, please install them:$NOT_FOUND" |
| exit 1 |
| fi |
| |
| TIMEOUT_SECONDS=$(parseDuration $WAIT_TIMEOUT) |
| |
| mkdir -p .voltha |
| touch .voltha/ports |
| HAVE=$(grep $NAME .voltha/ports) |
| if [ "$HAVE X" == " X" ]; then |
| # Find free port prefix |
| START=81 |
| while true; do |
| if [ $(grep -c $START .voltha/ports) -eq 0 ]; then |
| break |
| fi |
| START=$(expr $START + 1) |
| done |
| DELTA=$(expr $START - 81) |
| ONOS_API_PORT=${ONOS_API_PORT:-${START}81} |
| ONOS_SSH_PORT=${ONOS_SSH_PORT:-${START}01} |
| VOLTHA_API_PORT=${VOLTHA_API_PORT:-5$(expr 55 + $DELTA)55} |
| VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(expr 50 + $DELTA)22} |
| VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(expr 23 + $DELTA)79} |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92} |
| else |
| VALUES=$(echo $HAVE | sed -e 's/\s//g' | cut -d= -f2) |
| ONOS_API_PORT=${ONOS_API_PORT:-$(echo $VALUES | cut -d, -f1)} |
| ONOS_SSH_PORT=${ONOS_SSH_PORT:-$(echo $VALUES | cut -d, -f2)} |
| VOLTHA_API_PORT=${VOLTHA_API_PORT:-$(echo $VALUES | cut -d, -f3)} |
| VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(echo $VALUES | cut -d, -f4)} |
| VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(echo $VALUES | cut -d, -f5)} |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(echo $VALUES | cut -d, -f6)} |
| |
| # A bit of a hueristic required here as the KAFKA port forward was |
| # added after the .voltha/ports files was created. Basically, if |
| # the VOLTHA_KAFKA_PORT isn't in the file then calculate the original |
| # DELTA from the VOLTHA_SSH_PORT and apply it to the VOLTHA_KAFKA_PORT |
| if [ -z "$VOLTHA_KAFKA_PORT" ]; then |
| DELTA=$((VOLTHA_SSH_PORT/100-50)) |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92} |
| fi |
| fi |
| |
| PORTTMP=$(mktemp -u) |
| cat .voltha/ports | grep -v $NAME > $PORTTMP |
| echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT,$VOLTHA_KAFKA_PORT" >> $PORTTMP |
| cp $PORTTMP .voltha/ports |
| rm -f $PORTTMP |
| |
| export ONOS_API_PORT ONOS_SSH_PORT |
| |
| IDX=1 |
| CLOCK="TIME:" |
| SPIN_PARTS= |
| NOT_VERIFIED= |
| THEX= |
| BUILD= |
| CROSS= |
| ENTER= |
| VERIFIED= |
| HELM= |
| OLD_KEY= |
| BIRD= |
| HIGH_VOLTAGE= |
| PLUG= |
| RESTART= |
| FORWARD= |
| INSTALL= |
| STOP= |
| GO= |
| DOWNLOAD= |
| GEAR= |
| NO_ENTRY= |
| LOCK= |
| |
| if [ $FANCY -eq 1 ]; then |
| SPIN_PARTS="\ |
| \xe2\xa2\x8e\xe2\xa1\xb0 \ |
| \xe2\xa2\x8e\xe2\xa1\xa1 \ |
| \xe2\xa2\x8e\xe2\xa1\x91 \ |
| \xe2\xa2\x8e\xe2\xa0\xb1 \ |
| \xe2\xa0\x8e\xe2\xa1\xb1 \ |
| \xe2\xa2\x8a\xe2\xa1\xb1 \ |
| \xe2\xa2\x8c\xe2\xa1\xb1 \ |
| \xe2\xa2\x86\xe2\xa1\xb1 \ |
| " |
| CLOCK="\xe2\x8f\xb1" |
| THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}" |
| ENTER="${YELLOW}${BOLD}\xe2\x8e\x86${NORMAL}" |
| CROSS="${YELLOW}${BOLD}\xe2\x9c\x9a${NORMAL}" |
| BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}" |
| NOT_VERIFIED="$BUILD" |
| VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}" |
| HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}" |
| OLD_KEY="\xF0\x9F\x97\x9D" |
| BIRD="\xF0\x9F\x90\xA6" |
| HIGH_VOLTAGE="\xE2\x9A\xA1" |
| PLUG="\xF0\x9F\xa7\xa9" |
| RESTART="\xf0\x9f\x94\x84" |
| FORWARD="\xE2\x87\xA8" |
| INSTALL="\xF0\x9F\x8F\x97" |
| STOP="\xf0\x9f\x9b\x91" |
| GO="\xf0\x9f\x9a\x80" |
| DOWNLOAD="\xf0\x9f\x93\xa5" |
| GEAR="\xe2\x9a\x99" |
| NO_ENTRY="\xe2\x9b\x94" |
| LOCK="\xf0\x9f\x94\x92" |
| fi |
| |
| duration() { |
| local h=$(expr $1 / 3600) |
| local m=$(expr $1 % 3600 / 60) |
| local s=$(expr $1 % 60) |
| local t="" |
| |
| if [ $h -gt 0 ]; then |
| t="$t${h}h" |
| fi |
| if [ $m -gt 0 ]; then |
| t="$t${m}m" |
| fi |
| echo "$t${s}s" |
| } |
| |
| printtime() { |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| echo -e "$INDENT $CLOCK $(duration $1)" |
| } |
| |
| bspin() { |
| IDX=1 |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ $FANCY -eq 0 ]; then |
| LINE=$(echo $* | sed -e 's/[\s+-]//g') |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$CIVIS$INDENT$*" |
| else |
| echo -en "$CIVIS$INDENT $*" |
| fi |
| } |
| |
| sspin() { |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ $FANCY -eq 0 ]; then |
| LINE=$(echo $* | sed -e 's/[\s+-]//g') |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$INDENT$*" |
| else |
| C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX) |
| echo -en "\r$INDENT$C $*" |
| IDX=$(expr $IDX + 1) |
| if [ $IDX -gt 8 ]; then |
| IDX=1 |
| fi |
| fi |
| } |
| |
| espin() { |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ $FANCY -eq 0 ]; then |
| LINE=$(echo $* | sed -e 's/[\s+-]//g') |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$INDENT$*" |
| else |
| echo -e "\r$INDENT$*$CNORM" |
| fi |
| } |
| |
| if [ "$1" == "get" -a "$2" == "voltconfig" ]; then |
| echo "$HOME/.volt/config-$NAME" |
| exit |
| fi |
| |
| if [ $# -ne 1 -o $(echo ":up:down:dump:" | grep -c ":$1:") -ne 1 ]; then |
| >&2 echo "What wouild you like to do today:" |
| >&2 echo " up - bring up voltha" |
| >&2 echo " down - tear down voltha" |
| >&2 echo " dump - create a debug dump of running system" |
| exit 1 |
| fi |
| |
| push_onos_config() { |
| local TYPE=$1 |
| local MSG=$2 |
| local RESOURCE=$3 |
| local DATA=$4 |
| |
| # Thanks to the latest version of ONOS using the return code 207 this gets a |
| # whole lot nastier. Can't thank them enough for doing this. So in order to |
| # capture the command and the output in the log file as well as capture the |
| # status code to verify it is 200 and not 207 mutltiple files and a bit of |
| # hackery must be used. Thanks again ONOS. |
| local CMD_ECHO=$(mktemp -u) |
| local CMD_OUTPUT=$(mktemp -u) |
| local SC_OUTPUT=$(mktemp -u) |
| local WAIT_START=$(date +%s) |
| |
| bspin - "$MSG $GEAR" |
| while true; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin - "$THEX" |
| doTimeout "waiting for ONOS config push on $RESOURCE" |
| fi |
| if [ $TYPE == "file" ]; then |
| (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data @$DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1 |
| RESULT=$? |
| fi |
| if [ $TYPE == "json" ]; then |
| (set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data $DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1 |
| RESULT=$? |
| fi |
| # Dump everything to the log |
| cat $CMD_ECHO >> $LOG |
| test -r $CMD_OUTPUT && cat $CMD_OUTPUT >> $LOG |
| SC=$(cat $SC_OUTPUT) |
| echo "RESPONSE CODE: $SC" >> $LOG |
| echo "ERROR CODE: $RESULT" >> $LOG |
| |
| # clean up temp files |
| rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT |
| if [ $RESULT -eq 0 -a "$SC" == "200" ]; then |
| break |
| fi |
| sleep 1 |
| sspin - |
| done |
| espin - $VERIFIED |
| } |
| |
| check_onos_app_active() { |
| local APP_ID=$1 |
| local WAIT_START=$(date +%s) |
| |
| bspin - "Checking that $APP_ID is active $CLOCK" |
| while true; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin - "$THEX" |
| doTimeout "waiting for ONOS application activation '$APP_ID'" |
| fi |
| (set -x; curl --fail -sSL --user karaf:karaf -X GET http://$_ONOS_API_EP/onos/v1/applications/$APP_ID | grep ACTIVE >>$LOG 2>&1) >>$LOG 2>&1 |
| if [ $? -eq 0 ]; then |
| break |
| fi |
| sleep 1 |
| sspin - |
| done |
| sleep 5 # OSGI components take a little longer that the app to activate |
| espin - $VERIFIED |
| } |
| |
| override_onos_app() { |
| local APP=$1 |
| local NAME=$(basename $APP | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g') |
| local WAIT_START=$(date +%s) |
| |
| while true; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin - "$THEX" |
| doTimeout "waiting to overwrite ONOS application '$APP'" |
| fi |
| sspin - |
| # Attempt to delete old version (if it exists) |
| (set -x; curl --fail -sSL --user karaf:karaf -X DELETE http://$_ONOS_API_EP/onos/v1/applications/$NAME >>$LOG 2>&1) >>$LOG 2>&1 |
| sspin - |
| if [ $? -ne 0 ]; then |
| continue |
| fi |
| (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream http://$_ONOS_API_EP/onos/v1/applications?activate=true --data-binary @$APP >>$LOG 2>&1) >>$LOG 2>&1 |
| if [ $? -eq 0 ]; then |
| break |
| fi |
| sleep .2 |
| done |
| } |
| |
| activate_onos_app() { |
| local MSG="$1" |
| local APP=$2 |
| local WAIT_START=$(date +%s) |
| |
| bspin - "$MSG $GO" |
| while true; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin - "$THEX" |
| doTimeout "waiting to activate ONOS application '$APP'" |
| fi |
| sspin - |
| (set -x; curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/applications/$APP/active >>$LOG 2>&1) >>$LOG 2>&1 |
| if [ $? -eq 0 ]; then |
| break |
| fi |
| sleep .2 |
| done |
| espin - "$VERIFIED" |
| } |
| |
| count_pods() { |
| local NAMESPACE=$1; shift |
| if [ "$NAMESPACE" == "all-namespaces" ]; then |
| NAMESPACE="--all-namespaces" |
| else |
| NAMESPACE="-n $NAMESPACE" |
| fi |
| local STATES=$1; shift |
| local PODS=$(kubectl get $NAMESPACE pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}") |
| local COUNT=0 |
| local PATTERNS="$*" |
| for POD in $PODS; do |
| local NAME=$(echo $POD | cut -d/ -f 1) |
| local STATE=$(echo $POD | cut -d/ -f 2) |
| local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g') |
| if [ "$STATES" == "*" -o $(echo "$STATES" | grep -c ":$STATE:") -ne 0 ]; then |
| local TOTAL=$(echo $CONTAINERS | wc -w) |
| local FOUND=$(echo $CONTAINERS | grep -o true | wc -l) |
| if [ $TOTAL -eq $FOUND ]; then |
| for PATTERN in $PATTERNS; do |
| if [[ $NAME =~ $PATTERN ]]; then |
| COUNT=$(expr $COUNT + 1) |
| break |
| fi |
| done |
| fi |
| fi |
| done |
| echo $COUNT |
| } |
| |
| wait_for_pods() { |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=$1; shift |
| fi |
| local NAMESPACE=$1; shift |
| local EXPECT=$1; shift |
| local TYPE=$1; shift |
| local RETRY=$1; shift |
| local MESSAGE=$1; shift |
| local PATTERNS=$* |
| local STATES=":Running:" |
| if [ "$TYPE" == "not" ]; then |
| STATES="*" |
| fi |
| local HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS) |
| local ALL=$HAVE |
| if [ "$TYPE" == "only" ]; then |
| ALL=$(count_pods "all-namespaces" "*" ".*") |
| fi |
| COUNT=$(expr 300 / 15) |
| local WAIT_START=$(date +%s) |
| bspin $INDENT $MESSAGE |
| sspin $INDENT |
| if [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; then |
| while [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin $INDENT "$THEX" |
| doTimeout "waiting for PODs to start" |
| fi |
| sspin $INDENT |
| COUNT=$(expr $COUNT - 1) |
| if [ $COUNT -eq 0 ]; then |
| HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS) |
| ALL=$HAVE |
| if [ "$TYPE" == "only" ]; then |
| ALL=$(count_pods "all-namespaces" "*" ".*") |
| fi |
| COUNT=$(expr 300 / 15) |
| fi |
| sleep .15 |
| done |
| fi |
| espin $INDENT $VERIFIED |
| if [ $HAVE -ne $EXPECT ]; then |
| return 1 |
| fi |
| return 0 |
| } |
| |
| port_forward() { |
| local NS=$1 |
| local SVC=$2 |
| local FROM_PORT=$3 |
| local TO_PORT=$4 |
| local TAG=$SVC-$NAME |
| |
| (set -x; _TAG=$TAG bash -c "while true; do kubectl port-forward -n $NS service/$SVC $FROM_PORT:$TO_PORT; done" >>$LOG 2>&1 &) >>$LOG 2>&1 |
| } |
| |
| kill_port_forward() { |
| local TAG=$1-$NAME |
| local P_IDS=$(ps e -ww -A | grep "_TAG=$TAG" | grep -v grep | awk '{print $1}') |
| local PARENTS= |
| local KIDS= |
| local UNKNOWN= |
| if [ ! -z "$P_IDS" ]; then |
| for P_ID in $P_IDS; do |
| local PP_ID=$(ps -o ppid $P_ID | tail -n +2) |
| if [ ! -z "$PP_ID" ]; then |
| if [ $PP_ID -eq 1 ]; then |
| PARENTS="$PARENTS $P_ID" |
| else |
| KIDS="$KIDS $P_ID" |
| fi |
| else |
| UNKNOWN="$UNKNOWN $P_ID" |
| fi |
| done |
| (set -x; kill -9 $PARENTS $KIDS $UNKNOWN >>$LOG 2>&1) >>$LOG 2>&1 |
| fi |
| } |
| |
| if [ "$1" == "down" ]; then |
| echo "Tearing down voltha cluster $NAME" |
| LOG="down-$NAME.log" |
| echo $(date -u +"%Y%m%dT%H%M%SZ") >$LOG |
| bspin "Remove port-forwards: onos-ui-$NAME" |
| kill_port_forward onos-ui |
| sspin "Remove port-forwards: onos-ssh-$NAME$CEOL" |
| kill_port_forward onos-ssh |
| sspin "Remove port-forwards: voltha-api-$NAME$CEOL" |
| kill_port_forward voltha-api |
| sspin "Remove port-forwards: voltha-etcd-$NAME$CEOL" |
| kill_port_forward voltha-etcd-cluster-client |
| sspin "Remove port-forwards: voltha-kafka-$NAME$CEOL" |
| kill_port_forward voltha-kafka |
| espin "$VERIFIED Remove port-forwards$CEOL" |
| if [ $DEPLOY_K8S == "yes" ]; then |
| if [ -x ./bin/kind ]; then |
| bspin "Delete Kubernetes Kind Cluster" |
| (set -x; ./bin/kind delete cluster --name voltha-$NAME >>$LOG 2>&1) >>$LOG 2>&1 |
| espin $VERIFIED |
| else |
| espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found" |
| fi |
| else |
| EXISTS=$(helm list -q) |
| EXPECT="etcd-operator onos open-olt open-onu sim voltha bbsim radius" |
| bspin "Remove Helm Deployments" |
| for i in $EXISTS; do |
| for j in $EXPECT; do |
| if [[ $i =~ $j ]]; then |
| sspin "Remove Helm Deployments: $i$CEOL" |
| (set -x; ./bin/helm delete --no-hooks --purge $i >>$LOG 2>&1) >>$LOG 2>&1 |
| fi |
| done |
| done |
| espin "$VERIFIED Remove Helm Deployments$CEOL" |
| if [ "$WAIT_ON_DOWN" == "yes" ]; then |
| # There should only be 13 or 15 PODs in the kube-system name |
| # space and no other PODs |
| PODS="coredns-.* \ |
| etcd-voltha-$NAME-control-plane \ |
| kindnet-.* \ |
| kube-apiserver-voltha-$NAME-control-plane \ |
| kube-controller-manager-voltha-$NAME-control-plane \ |
| kube-proxy-.* \ |
| kube-scheduler-voltha-$NAME-control-plane \ |
| tiller-deploy-.*" |
| EXPECT=$(test "$TYPE" == "minimal" && echo "13" || echo "15") |
| PODS="adapter-.* \ |
| bbsim.* \ |
| etcd-operator.* \ |
| radius.* \ |
| voltha-.*" |
| |
| EXPECT=0 |
| |
| if [ "$WITH_ONOS" == "yes" ]; then |
| ONOS_PODS="onos-.*" |
| wait_for_pods "default" $EXPECT "not" -1 "Waiting for ONOS PODs to terminate" $ONOS_PODS |
| fi |
| wait_for_pods "voltha" $EXPECT "not" -1 "Waiting for VOLTHA PODs to terminate" $PODS |
| fi |
| fi |
| exit |
| fi |
| |
| if [ "$1" == "dump" ]; then |
| LOG="dump-$NAME.log" |
| TS=$(date -u +"%Y%m%dT%H%M%SZ") |
| if [ ! -z "$DUMP_FROM" ]; then |
| TS=$(echo $DUMP_FROM | sed -e 's/[:-]//g') |
| fi |
| WORK=$(mktemp -u -d) |
| DATA=$WORK/voltha-debug-dump-$NAME-$TS |
| mkdir -p $DATA |
| echo $TS > $LOG |
| echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz" |
| bspin - "Copy install log" |
| if [ -f install-$NAME.log ]; then |
| (set -x; cp install-$NAME.log $DATA/install-$NAME.log) >>$LOG 2>&1 |
| espin - $VERIFIED |
| else |
| espin - "$NO_ENTRY Copy install log: install-$NAME.log not found" |
| fi |
| bspin - "Dumping Kubernetes PODs" |
| (set -x; kubectl get --all-namespaces pods >> $DATA/all-pods.txt 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Dumping Kubernetes SERVICEs" |
| (set -x; kubectl get --all-namespaces svc >> $DATA/all-services.txt 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Dumping Kubernetes EVENTs" |
| (set -x; kubectl get --all-namespaces events >> $DATA/all-events.txt 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Dumping VOLTHA POD details" |
| PODS="$(kubectl -n default get pod -o name | grep onos | sed -e 's/^/default:/g') $(kubectl get -n voltha pod -o name | sed -e 's/^/voltha:/g')" |
| SINCE= |
| if [ ! -z "$DUMP_FROM" ]; then |
| SINCE="--since-time=$DUMP_FROM" |
| fi |
| for POD in $PODS; do |
| NS=$(echo $POD | cut -d: -f1) |
| POD=$(echo $POD | cut -d: -f2) |
| sspin - "Dumping VOLTHA POD details: $POD$CEOL" |
| mkdir -p $DATA/$POD |
| (set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| (set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| (set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| done |
| espin - "$VERIFIED Dumping VOLTHA POD details$CEOL" |
| bspin - "Dumping ETCD" |
| if [ "$(which etcdctl) X" != " X" ]; then |
| (set -x; ETCDCTL_API=3 etcdctl --endpoints localhost:$VOLTHA_ETCD_PORT get --prefix service/voltha | hexdump -C >> $DATA/etcd.hex 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| else |
| espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available" |
| fi |
| bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz" |
| (set -x; tar -C $WORK -zcf voltha-debug-dump-$NAME-$TS.tgz ./voltha-debug-dump-$NAME-$TS) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Cleanup" |
| (set -x; rm -rf $WORK) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "$(ls -l voltha-debug-dump-$NAME-$TS.tgz)" |
| espin - $VERIFIED |
| exit |
| fi |
| |
| LOG="install-$NAME.log" |
| date > $LOG |
| echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $LOG |
| |
| # Output install options to log |
| echo "OPTIONS" >> $LOG |
| for O in $ALL_OPTIONS; do |
| VAL=$(eval echo \$$O) |
| if [ ! -z "$VAL" ]; then |
| printf " %-30s = %s\n" $O $VAL >> $LOG |
| fi |
| done |
| |
| helm_install() { |
| local INDENT= |
| if [ "$1" == "-" ]; then |
| INDENT=$1; shift |
| fi |
| local NAMESPACE=$1; shift |
| local INAME=$1; shift |
| local CHART=$1; shift |
| local CHART_VERSION=$1; shift |
| local MESSAGE=$* |
| |
| if [ "$CHART_VERSION X" != " X" -a "$CHART_VERSION" != "latest" ]; then |
| CHART_VERSION="--version $CHART_VERSION" |
| else |
| CHART_VERSION= |
| fi |
| |
| local CHART_ARGS= |
| if [ -r "${INAME}-values.yaml" ]; then |
| CHART_ARGS="-f ${INAME}-values.yaml" |
| fi |
| |
| local WAIT_START=$(date +%s) |
| COUNT=$(expr 300 / 15) |
| bspin $INDENT $MESSAGE |
| (set -x; helm install -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1 |
| SUCCESS=$? |
| while [ $SUCCESS -ne 0 ]; do |
| if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then |
| espin "$THEX" |
| doTimeout "waiting for helm install $CHART" |
| fi |
| sspin $INDENT |
| COUNT=$(expr $COUNT - 1) |
| if [ $COUNT -eq 0 ]; then |
| (set -x; helm delete --purge $INAME >>$LOG 2>&1) >>$LOG 2>&1 |
| (set -x; helm install -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $INAME $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1 |
| SUCCESS=$? |
| COUNT=$(expr 300 / 15) |
| fi |
| sleep .15 |
| done |
| espin $INDENT $VERIFIED |
| } |
| |
| echo "INSTALL TYPE: $TYPE" >> $LOG |
| |
| bspin "Verify GOPATH" |
| export GOPATH=$(pwd) |
| mkdir -p $GOPATH/bin |
| espin $VERIFIED |
| |
| STIME=$(date +%s) |
| if [ "$INSTALL_KUBECTL" == "no" ]; then |
| bspin "Skip kubectl install" |
| espin $NO_ENTRY |
| else |
| bspin "Verify kubectl $HELM" |
| if [ -x $GOPATH/bin/kubectl ]; then |
| espin $VERIFIED |
| else |
| espin $NOT_VERIFIED |
| bspin - "Download and install Kubernetes/kubectl $DOWNLOAD" |
| (set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1 |
| (set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| if [ "$DEPLOY_K8S" == "no" ]; then |
| bspin "Skip Kubernetes/Kind Deployment" |
| espin $NO_ENTRY |
| else |
| bspin "Verify Kubernetes/Kind $HELM" |
| IS_INSTALLED=0 |
| OP_TYPE="install" |
| if [ -x $GOPATH/bin/kind ]; then |
| OP_TYPE="upgrade" |
| if [ $($GOPATH/bin/kind --version | grep -c $KIND_VERSION) -eq 1 ]; then |
| IS_INSTALLED=1 |
| espin $VERIFIED |
| fi |
| fi |
| if [ $IS_INSTALLED -eq 0 ]; then |
| espin $NOT_VERIFIED |
| bspin - "Download and $OP_TYPE Kubernetes/kind $DOWNLOAD" |
| (set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1 |
| (set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| fi |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| if [ "$INSTALL_HELM" == "no" ]; then |
| bspin "Skip Helm Install" |
| espin $NO_ENTRY |
| else |
| bspin "Verify Helm $HELM" |
| if [ -x $GOPATH/bin/helm ]; then |
| espin $VERIFIED |
| else |
| espin $NOT_VERIFIED |
| bspin - "Download and install Helm $DOWNLOAD" |
| (set -x; curl -sSL https://git.io/get_helm.sh | DESIRED_VERSION=v2.14.3 USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| fi |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| bspin "Verify voltctl $HIGH_VOLTAGE" |
| VOK=0 |
| VMESSAGE="install" |
| export VC_VERSION="$VOLTCTL_VERSION" |
| if [ "$VC_VERSION" == "latest" ]; then |
| export VC_VERSION=$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g') |
| fi |
| if [ -x $GOPATH/bin/voltctl ]; then |
| VHAVE=$($GOPATH/bin/voltctl version --clientonly -o json | jq -r .version) |
| if [ $? -eq 0 -a "$VHAVE" == "$VC_VERSION" ]; then |
| VOK=1 |
| espin $VERIFIED |
| else |
| VCHECK=$(echo -e "$VHAVE\n$VC_VERSION" | sort -V | head -1) |
| if [ "$VCHECK" == "$VHAVE" ]; then |
| VMESSAGE="upgrade" |
| else |
| VMESSAGE="downgrade" |
| fi |
| fi |
| fi |
| |
| if [ $VOK -eq 0 ]; then |
| espin $NOT_VERIFIED |
| bspin - "Download and $VMESSAGE voltctl $DOWNLOAD" |
| (set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v$VC_VERSION/voltctl-$VC_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1 |
| (set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| bspin "Verify command PATH" |
| export PATH=$GOPATH/bin:$PATH |
| espin $VERIFIED |
| |
| STIME=$(date +%s) |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| HAVE=$(kind get clusters | grep -c voltha-$NAME) |
| bspin "Verify Kubernetes/Kind Cluster" |
| sspin |
| if [ $HAVE -eq 0 ]; then |
| espin $NOT_VERIFIED |
| bspin - "Verify cluster configuration" |
| if [ ! -r ./$NAME-cluster.cfg ]; then |
| espin - $NOT_VERIFIED |
| bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD" |
| ERR_OUT=$(mktemp) |
| (set -x; curl --fail -o ./$NAME-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-cluster.cfg >>$LOG 2>>$ERR_OUT) >>$LOG 2>&1 |
| if [ $? -ne 0 ]; then |
| espin - $THEX |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-cluster.cfg${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}" |
| echo "ERROR: $(cat $ERR_OUT)" >>$LOG |
| rm -rf $ERR_OUT ./$NAME-cluster.cfg |
| exit 1 |
| fi |
| rm -rf $ERR_OUT |
| else |
| espin - $VERIFIED |
| fi |
| kind create cluster --name voltha-$NAME --config $NAME-cluster.cfg |
| else |
| espin $VERIFIED |
| fi |
| |
| export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$NAME")" |
| P="coredns-.* \ |
| etcd-voltha-$NAME-control-plane \ |
| kindnet-.* \ |
| kube-apiserver-voltha-$NAME-control-plane \ |
| kube-controller-manager-voltha-$NAME-control-plane \ |
| kube-proxy-.* \ |
| kube-scheduler-voltha-$NAME-control-plane" |
| |
| EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14") |
| wait_for_pods - "kube-system" $EXPECT "includes" -1 "Waiting for system PODs to start" $P |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| COUNT=$(count_pods "kube-system" ":Running:" "tiller-deploy-.*") |
| bspin "Verify Helm" |
| if [ $COUNT -ne 1 ]; then |
| espin $NOT_VERIFIED |
| echo -e "Configuring Helm $GEAR" |
| if [ "$INSTALL_HELM" == "no" ]; then |
| bspin - "Skip Helm/Tiller Initialization" |
| espin - $NO_ENTRY |
| else |
| bspin - "Initialize Helm" |
| (set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*" |
| fi |
| bspin - "Add Google Incubator repository to Helm" |
| (set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| |
| # HACK (sort-of) - the config for tiller is about to be patched, which will |
| # cause the tiller pod to be recreated. This can sometimes cause a timing |
| # issue with the "wait_for_pods" call on tiller as it may incorrectly |
| # identify the running/ready tiller pod that is soon to be terminated as |
| # what it is waiting for. To avoid this issue we do a clean scale down and |
| # scale up of the pod so the script controlls when it should be expecting |
| # things |
| (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1 |
| |
| bspin - "Add Google Stable repository to Helm" |
| (set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Add ONF repository to Helm" |
| (set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Update Helm repository cache" |
| (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| |
| # Create and k8s service account so that Helm can create pods |
| bspin - "Create Tiller ServiceAccount" |
| (set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Create Tiller ClusterRoleBinding" |
| (set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| bspin - "Update Tiller Manifest" |
| (set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1 |
| |
| # HACK (sort-of) - part to, spin it back up |
| (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| else |
| espin $VERIFIED |
| if [ "$UPDATE_HELM_REPOS" == "yes" ]; then |
| bspin - "Update Helm repository cache" |
| (set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| fi |
| wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| bspin "Verify Helm values file: $NAME-values.yaml" |
| if [ ! -r "./$NAME-values.yaml" ]; then |
| espin $NOT_VERIFIED |
| bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD" |
| ERR_OUT=$(mktemp) |
| (set -x; curl --fail -o ./$NAME-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-values.yaml >>$LOG 2>$ERR_OUT) >>$LOG 2>&1 |
| if [ $? -ne 0 ]; then |
| espin - $THEX |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-values.yaml${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}" |
| echo "ERROR: $(cat $ERR_OUT)" >>$LOG |
| rm -rf $ERR_OUT ./$NAME-values.yaml |
| exit 1 |
| fi |
| rm -rf $ERR_OUT |
| espin - $VERIFIED |
| else |
| espin $VERIFIED |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| bspin "Verify or download chart specific values files $DOWNLOAD" |
| VALUES_FILES="monkey-values.yaml" |
| ERR_OUT=$(mktemp) |
| for i in $VALUES_FILES; do |
| if [ ! -r ./$i ]; then |
| (set -x; curl --fail -o ./$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1 |
| if [ $? -ne 0 ]; then |
| espin $THEX |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}" |
| echo "ERROR: $i - $(cat $ERR_OUT)" >>$LOG |
| rm -rf $ERR_OUT ./$i |
| exit 1 |
| fi |
| rm -rf $ERR_OUT |
| fi |
| done |
| espin $VERIFIED |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| if [ "$WITH_CHAOS" == "yes" ]; then |
| bspin "Verify or clone kube-monkey helm chart $DOWNLOAD" |
| if [ -r ./kube-monkey ]; then |
| espin $VERIFIED |
| else |
| espin $NOT_VERIFIED |
| bspin - "GIT clone kube-monkey" |
| (set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>$LOG 2>&1) >>$LOG 2>&1 |
| espin - $VERIFIED |
| fi |
| fi |
| |
| if [ "$JUST_K8S" == "yes" ]; then |
| echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye." |
| echo "" |
| echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG |
| echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG |
| echo "tools required by VOLTHA in your command path. " | tee -a $LOG |
| echo "" | tee -a $LOG |
| echo -en $BOLD |
| if [ $DEPLOY_K8S == "yes" ]; then |
| echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG |
| fi |
| echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG |
| echo -en $NORMAL |
| echo "" | tee -a $LOG |
| echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG |
| exit 0 |
| fi |
| |
| STIME=$(date +%s) |
| bspin "Verify ETCD Operator $OLD_KEY" |
| if [ $(helm list --deployed --short --namespace voltha "^etcd-operator\$" | wc -l) -ne 1 ]; then |
| espin $NOT_VERIFIED |
| helm_install - voltha etcd-operator stable/etcd-operator latest "Install ETCD Operator" |
| else |
| espin $VERIFIED |
| fi |
| EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3") |
| wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for ETCD Operator to start" "etcd-operator-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| if [ $WITH_ONOS == "yes" ]; then |
| bspin "Verify ONOS installed $BIRD" |
| if [ $(helm list --deployed --short --namespace default "^onos\$" | wc -l) -ne 1 ]; then |
| espin $NOT_VERIFIED |
| EXTRA_HELM_FLAGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - default onos $ONOS_CHART $ONOS_CHART_VERSION "Install ONOS" |
| else |
| espin $VERIFIED |
| fi |
| wait_for_pods - "default" 1 "includes" -1 "Waiting for ONOS to start" "onos-.*" |
| |
| if [ $WITH_PORT_FORWARDS == "yes" ]; then |
| bspin - "Forward ONOS API port $FORWARD" |
| kill_port_forward onos-ui |
| port_forward default onos-ui $ONOS_API_PORT 8181 |
| espin - $VERIFIED |
| bspin - "Forward ONOS SSH port $FORWARD" |
| kill_port_forward onos-ssh |
| port_forward default onos-ssh $ONOS_SSH_PORT 8101 |
| espin - $VERIFIED |
| _ONOS_API_EP="127.0.0.1:$ONOS_API_PORT" |
| else |
| _ONOS_API_EP=$(get_service_ep default onos-ui) |
| fi |
| bspin - "Verify or download ONOS configuration support files $DOWNLOAD" |
| ONOS_FILES="olt-onos-enableExtraneousRules.json onos-aaa.json \ |
| onos-dhcpl2relay.json onos-kafka.json onos-sadis-sample.json" |
| (set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1 |
| ERR_OUT=$(mktemp) |
| for i in $ONOS_FILES; do |
| if [ ! -r ./onos-files/$i ]; then |
| (set -x; curl --fail -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/onos-files/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1 |
| if [ $? -ne 0 ]; then |
| espin - $THEX |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}" |
| echo "ERROR: $(cat $ERR_OUT)" >>$LOG |
| rm -rf $ERR_OUT ./onos-files/$i |
| exit 1 |
| fi |
| rm -rf $ERR_OUT |
| fi |
| done |
| espin - $VERIFIED |
| |
| if [ $INSTALL_ONOS_APPS == "yes" ]; then |
| bspin - "Installing custom ONOS applications" |
| if [ -x onos-files/onos-apps -a $(ls -1 onos-files/onos-apps/*.oar 2>/dev/null | wc -l) -gt 0 ]; then |
| for OAR in $(ls -1 onos-files/onos-apps/*.oar); do |
| sspin - "Installing custom ONOS applications - $OAR$CEOL" |
| override_onos_app $OAR |
| done |
| espin - "$VERIFIED Installing custom ONOS applications$CEOL" |
| else |
| espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found" |
| fi |
| fi |
| |
| check_onos_app_active org.opencord.kafka |
| push_onos_config "file" "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" "onos-files/onos-kafka.json" |
| check_onos_app_active org.opencord.dhcpl2relay |
| push_onos_config "file" "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json" |
| check_onos_app_active org.opencord.olt |
| # FIXME use WITH_DHCP and WITH_EAPOL flags to configre OLT App |
| # Default value for "enableEapol" is true in OLT App |
| if [ $WITH_EAPOL == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":true}' |
| elif [ $WITH_EAPOL == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":false}' |
| fi |
| # Default value for "enableDhcpOnProvisioning" is false and for "enableDhcpV4" is true in OLT App |
| if [ $WITH_DHCP == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":true,"enableDhcpV4":true}' |
| elif [ $WITH_DHCP == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":false,"enableDhcpV4":false}' |
| fi |
| # Default value for "enableIgmpOnProvisioning" is false in OLT App |
| if [ $WITH_IGMP == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":true}' |
| elif [ $WITH_IGMP == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":false}' |
| fi |
| if [ $ENABLE_ONOS_EXTRANEOUS_RULES == "yes" ]; then |
| push_onos_config "file" "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json" |
| fi |
| if [ $(echo ":yes:file:" | grep -c ":$CONFIG_SADIS:") -eq 1 ]; then |
| check_onos_app_active org.opencord.sadis |
| push_onos_config "file" "[optional] Push ONOS SADIS Configuration: $SADIS_CFG" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG" |
| elif [ "$CONFIG_SADIS" == "bbsim" ]; then |
| push_onos_config "json" \ |
| "[optional] Push ONOS configuration for BBSIM SADIS servers" \ |
| "network/configuration/apps/org.opencord.sadis" \ |
| "$(echo $(cat <<EOJ |
| { |
| "sadis": { |
| "integration": { |
| "url": "http://bbsim.voltha.svc.cluster.local:50074/v2/subscribers/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| }, |
| "bandwidthprofile": { |
| "integration": { |
| "url": "http://bbsim.voltha.svc.cluster.local:50074/v2/bandwidthprofiles/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| } |
| } |
| EOJ |
| ) | tr -d '[:space:]')" |
| elif [ "$CONFIG_SADIS" == "url" ]; then |
| push_onos_config "json" \ |
| "[optional] Push ONOS configuration for custom SADIS and Bandwidth Profile servers" \ |
| "network/configuration/apps/org.opencord.sadis" \ |
| "$(echo $(cat <<EOJ |
| { |
| "sadis": { |
| "integration": { |
| "url": "$SADIS_SUBSCRIBERS", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| }, |
| "bandwidthprofile": { |
| "integration": { |
| "url": "$SADIS_BANDWIDTH_PROFILES", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| } |
| } |
| EOJ |
| ) | tr -d '[:space:]')" |
| fi |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| STIME=$(date +%s) |
| bspin "Verify VOLTHA installed $HIGH_VOLTAGE" |
| if [ $(helm list --deployed --short --namespace voltha "^voltha\$" | wc -l) -ne 1 ]; then |
| espin $NOT_VERIFIED |
| if [ "$ONLY_ONE" == "yes" ]; then |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set therecanbeonlyone=true" |
| fi |
| helm_install - voltha voltha $VOLTHA_CHART $VOLTHA_CHART_VERSION "Install VOLTHA Core" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| else |
| espin $VERIFIED |
| fi |
| |
| VOLTHA="voltha-ofagent-.* \ |
| ro-core.* \ |
| rw-core.* \ |
| voltha-api-server-.* \ |
| voltha-etcd-cluster-.* \ |
| voltha-kafka-.* \ |
| voltha-zookeeper-.*" |
| if [ "$ONLY_ONE" == "yes" ]; then |
| EXPECT=$(test "$TYPE" == "minimal" && echo "5" || echo "9") |
| else |
| EXPECT=$(test "$TYPE" == "minimal" && echo "8" || echo "12") |
| fi |
| wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for VOLTHA Core to start" $VOLTHA |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| |
| if [ "$WITH_ADAPTERS" == "yes" ]; then |
| STIME=$(date +%s) |
| EXPECT=0 |
| echo -e "Verify Adapters $PLUG" |
| if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then |
| bspin - "Verify Simulated Adapters installed" |
| if [ $(helm list --deployed --short --namespace voltha "^sim\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| helm_install - voltha sim $VOLTHA_ADAPTER_SIM_CHART $VOLTHA_ADAPTER_SIM_CHART_VERSION "Install Simulated Adapters" |
| else |
| espin - $VERIFIED |
| fi |
| EXPECT=$(expr $EXPECT + 2) |
| fi |
| |
| if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then |
| bspin - "Verify OpenOLT Adapter installed" |
| if [ $(helm list --deployed --short --namespace voltha "^open-olt\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| helm_install - voltha open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART $VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION "Install OpenOLT Adapter" |
| else |
| espin - $VERIFIED |
| fi |
| bspin - "Verify OpenONU Adapter installed" |
| if [ $(helm list --deployed --short --namespace voltha "^open-onu\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| helm_install - voltha open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART $VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION "Install OpenONU Adapter" |
| else |
| espin - $VERIFIED |
| fi |
| EXPECT=$(expr $EXPECT + 2) |
| fi |
| |
| ADAPTERS="adapter-.*" |
| wait_for_pods - "voltha" $EXPECT "includes" -1 "Waiting for adapters to start" $ADAPTERS |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| fi |
| |
| if [ $WITH_BBSIM == "yes" ]; then |
| STIME=$(date +%s) |
| echo -e "Verify BBSIM $PLUG" |
| bspin - "Verify BBSIM Installed" |
| for instance in $(seq 0 $(($NUM_OF_BBSIM-1))); do |
| if [ $instance -eq 0 ]; then |
| instance_num="" |
| else |
| instance_num=$instance |
| fi |
| if [ $(helm list --deployed --short --namespace voltha "^bbsim${instance_num}\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set olt_id=$instance" |
| helm_install - voltha bbsim${instance_num} $VOLTHA_BBSIM_CHART $VOLTHA_BBSIM_CHART_VERSION "Install BBSIM${instance_num}" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| else |
| espin - $VERIFIED |
| fi |
| done |
| wait_for_pods - "voltha" $NUM_OF_BBSIM "includes" -1 "Waiting for BBSIM to start" "bbsim*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| fi |
| |
| if [ $WITH_RADIUS == "yes" ]; then |
| STIME=$(date +%s) |
| echo -e "Verify RADIUS $LOCK" |
| bspin - "Verify RADIUS Installed" |
| if [ $(helm list --deployed --short --namespace voltha "^radius\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| helm_install - voltha radius onf/freeradius latest "Install RADIUS" |
| else |
| espin - $VERIFIED |
| fi |
| wait_for_pods - "voltha" 1 "includes" -1 "Waiting for RADIUS to start" "radius-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| fi |
| |
| if [ $WITH_PORT_FORWARDS == "yes" ]; then |
| STIME=$(date +%s) |
| bspin - "Forward VOLTHA API port $FORWARD" |
| kill_port_forward voltha-api |
| port_forward voltha voltha-api $VOLTHA_API_PORT 55555 |
| espin - $VERIFIED |
| bspin - "Forward VOLTHA ETCD port $FORWARD" |
| kill_port_forward voltha-etcd-cluster-client |
| port_forward voltha voltha-etcd-cluster-client $VOLTHA_ETCD_PORT 2379 |
| espin - $VERIFIED |
| bspin - "Forward VOLTHA Kafka port $FORWARD" |
| kill_port_forward voltha-kafka |
| port_forward voltha voltha-kafka $VOLTHA_KAFKA_PORT 9092 |
| espin - $VERIFIED |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| fi |
| |
| if [ $WITH_ONOS == "yes" -a $WITH_RADIUS == "yes" ]; then |
| bspin "Configure ONOS RADIUS Connection $GEAR" |
| (set -x; cat onos-files/onos-aaa.json | sed -e "s/:RADIUS_IP:/$(kubectl -n voltha get service/radius -o jsonpath={.spec.clusterIP})/g" | curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/network/configuration/apps/org.opencord.aaa -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1 |
| espin $VERIFIED |
| fi |
| |
| if [ "$WITH_CHAOS" == "yes" ]; then |
| STIME=$(date +%s) |
| echo -e "Verify kube-monkey $LOCK" |
| bspin - "Verify kube-monkey Installed" |
| if [ $(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l) -ne 1 ]; then |
| espin - $NOT_VERIFIED |
| helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest "Install Chaos Monkey" |
| else |
| espin - $VERIFIED |
| fi |
| wait_for_pods - "kube-monkey" 1 "includes" -1 "Waiting for Chaos to start" "monkey-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| printtime $(expr $(date +%s) - $STIME) |
| fi |
| fi |
| |
| bspin "Create voltctl configuration file" |
| (set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1 |
| MIN_VC_VERSION=$(echo -e "1.0.15\n$VC_VERSION" | sort -V | head -1) |
| if [ $WITH_PORT_FORWARDS == "yes" ]; then |
| KAFKA_FLAG="-k localhost:$VOLTHA_KAFKA_PORT" |
| SERVER_FLAG="-s localhost:$VOLTHA_API_PORT" |
| ETCD_FLAG= |
| if [ "$MIN_VC_VERSION" == "1.0.15" ]; then |
| ETCD_FLAG="-e localhost:$VOLTHA_ETCD_PORT" |
| fi |
| else |
| KAFKA_FLAG="-k $(get_service_ep voltha voltha-kafka)" |
| SERVER_FLAG="-s $(get_service_ep voltha voltha-api)" |
| ETCD_FLAG= |
| if [ "$MIN_VC_VERSION" == "1.0.15" ]; then |
| ETCD_FLAG="-e $(get_service_ep voltha voltha-etcd-client)" |
| fi |
| fi |
| (set -x; voltctl -a v3 $KAFKA_FLAG $SERVER_FLAG $ETCD_FLAG config > $HOME/.volt/config-$NAME 2>>$LOG) >>$LOG 2>&1 |
| espin $VERIFIED |
| |
| if [ ! -f "$NAME-env.sh" ]; then |
| touch $NAME-env.sh |
| fi |
| |
| for O in $ALL_OPTIONS; do |
| VAL=$(eval echo \$$O) |
| if [ ! -z "$VAL" -a $(grep -c "^export $O=" $NAME-env.sh) -eq 0 ]; then |
| echo "export $O=\"$(eval echo \$$O)\"" >> $NAME-env.sh |
| fi |
| done |
| |
| if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $NAME-env.sh) -eq 0 ]; then |
| echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$NAME)\"" >> $NAME-env.sh |
| fi |
| |
| if [ $(grep -c "^export VOLTCONFIG=" $NAME-env.sh) -eq 0 ]; then |
| echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> $NAME-env.sh |
| fi |
| |
| if [ $(grep -c "^export PATH=" $NAME-env.sh) -eq 0 ]; then |
| echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $NAME-env.sh |
| fi |
| |
| echo "" |
| echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG |
| echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG |
| echo "tools required by VOLTHA in your command path. " | tee -a $LOG |
| echo "" | tee -a $LOG |
| echo -en $BOLD |
| if [ $DEPLOY_K8S == "yes" ]; then |
| echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG |
| fi |
| echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a $LOG |
| echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG |
| echo -en $NORMAL |
| echo "" | tee -a $LOG |
| echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| echo -e "$CLOCK ${BOLD}TOTAL: $(duration $(expr $(date +%s) - $TOTAL_START_TIME))${NORMAL}" |
| fi |