minimal-values.yaml - kind-voltha - Gitiles

 # Copyright 2019 Ciena Corporation
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 # IMAGE SELECTION
 # ---------------
 # By default no defaults are set and the image tags specified in the helm
 # charts will be used. If you would like to use the images generated from the
 # HEAD of the "master" git branches, then uncomment this below block and
 # set "<VALUE>" to "master". Similarly, if you want to use the images
 # generated from the HEAD of the "voltha-2.1" git branches, then uncomment
 # this block and replace "<VALUE>" with "voltha-2.1".
 defaults:
   image_tag: master

 # OFAGENT IMPLEMENTATION
 # ----------------------
 # There are currently two implementations of OFAGENT: the original written in
 # Python and the reimplementation written in Go. The variable `use_ofagent_go`
 # can be used to optionally select the implementation. The Go version is the
 # version to be part of the official release and is the default. The Python
 # verison has been deprecated and is no longer being actively workes, but is
 # being left as an option for this release.
 #
 # Along with this change you will also may need to set the Docker image
 # information below (search for START_OFAGENT_GO).
 use_ofagent_go: true

 # OPENONU-ADAPTER IMPLEMENTATION
 # ------------------------------
 # There are currently two implementations of OPENONU-ADAPTER: the original
 # written in Python and the reimplementation written in Go. The variable
 # `use_openonu_adapter_go` can be used to optionally use the new Go
 # implementation. This is done by setting that value to `true`.
 #
 # Along with this change you will also may need to set the Docker image
 # information below (search for START_OPENONU_ADAPTER_GO).
 use_openonu_adapter_go: false

 images:
   onos:
     repository: voltha/voltha-onos
     # IMAGE_SELECTION
     # ---------------
     # The helm chart used to deploy ONOS is the public ONOS helm chart so,
     # there is a need to specify the exact image repository and image tag.
     # If you would like to use the "master", "voltha-2.1", or other image
     # just replace the "tag" value below.
     tag: master

 # IMAGE_SELECTION
 # ---------------
 # Below are a list of all the images utilized by kind-voltha. This list is
 # provided as a conveinence if you would like to override on a per image
 # basis. If you are using the defaults, master, or voltha-2.1 branch there
 # is no need to utilize this list.
 #  adapter_open_olt:
 #    repository: voltha/voltha-openolt-adapter
 #    tag: 2.1.1
 #  adapter_open_onu:
 #    repository: voltha/voltha-openonu-adapter
 #    tag: 2.1.0
 #  adapter_simulated_olt:
 #    repository: voltha/voltha-adapter-simulated-olt
 #    tag: 2.1.1
 #  adapter_simulated_onu:
 #    repository: voltha/voltha-adapter-simulated-onu
 #    tag: 2.1.1
 #  bbsim:
 #    repository: voltha/bbsim
 #    tag: master
 # START_OFAGENT_GO - Comment the following block to use the Python implementation
 # of the ofagent
 #  ofagent_go:
 #    repository: voltha/voltha-ofagent-go
 #    tag: master
 # END_OFAGENT_GO
 #  ofagent_py:
 #    repository: voltha/voltha-ofagent-py
 #    tag: 2.1.1
 #  rw_core:
 #    repository: voltha/voltha-rw-core
 #    tag: 2.1.1
 # START_OPENONU_ADAPTER_GO - Uncomment the following block to use the Go implementation
 # of the openonu-adapter
 #  adapter_open_onu_go:
 #    repository: voltha-openonu-adapter-go
 #    tag: master
 # END_OPENONU_ADAPTER_GO

 deployments:
   etcdOperator: true
   backupOperator: false
   restoreOperator: false

 voltha-etcd-cluster:
   clusterSize: 1
   autoCompactionRetention: 1

 kafka:
   configurationOverrides:
     "default.replication.factor": 1
     "offsets.topic.replication.factor": 1
   replicas: 1

 onos_env:
 - name: POD_IP
   valueFrom:
   fieldRef:
     fieldPath: status.podIP
 - name: NAMESPACE
   valueFrom:
   fieldRef:
     fieldPath: metadata.namespace
 - name: ONOS_APPS
   value: "drivers,openflow-base,hostprovider"

 # Customization for BBSIM
 kafka_broker: 'voltha-kafka.voltha.svc.cluster.local:9092'
 pon: 1
 onu: 1
 auth: true
 dhcp: true

 # SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
 # The VOLTHA charts have support for adding extra labels to deployments and
 # pods. These extra labels can be used to integrate with other utilities
 # such as kube-monkey to add a bit of chaos to the cluster. Below are some
 # settings that can be uncommented to opt-in VOLTHA deployments/pods to
 # kube-monkey. For example, if you want ALL deployments and pods to opt-in
 # then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
 # If you want to be more selected then comment the blocks that pertain to the
 # targets you care about.

 #extra_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #extra_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #rw_core_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #rw_core_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #ofagent_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #ofagent_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #openolt_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #openolt_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #openonu_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #openonu_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #simolt_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #simolt_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #simonu_deployment_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
 #
 #simonu_pod_labels:
 #  kube-monkey/enabled: enabled
 #  kube-monkey/identifier: monkey-victim
 #  kube-monkey/mtbf: 1
 #  kube-monkey/kill-mode: fixed
 #  kube-monkey/kill-value: 1
	# Copyright 2019 Ciena Corporation
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	# IMAGE SELECTION
	# ---------------
	# By default no defaults are set and the image tags specified in the helm
	# charts will be used. If you would like to use the images generated from the
	# HEAD of the "master" git branches, then uncomment this below block and
	# set "<VALUE>" to "master". Similarly, if you want to use the images
	# generated from the HEAD of the "voltha-2.1" git branches, then uncomment
	# this block and replace "<VALUE>" with "voltha-2.1".
	defaults:
	image_tag: master

	# OFAGENT IMPLEMENTATION
	# ----------------------
	# There are currently two implementations of OFAGENT: the original written in
	# Python and the reimplementation written in Go. The variable `use_ofagent_go`
	# can be used to optionally select the implementation. The Go version is the
	# version to be part of the official release and is the default. The Python
	# verison has been deprecated and is no longer being actively workes, but is
	# being left as an option for this release.
	#
	# Along with this change you will also may need to set the Docker image
	# information below (search for START_OFAGENT_GO).
	use_ofagent_go: true

	# OPENONU-ADAPTER IMPLEMENTATION
	# ------------------------------
	# There are currently two implementations of OPENONU-ADAPTER: the original
	# written in Python and the reimplementation written in Go. The variable
	# `use_openonu_adapter_go` can be used to optionally use the new Go
	# implementation. This is done by setting that value to `true`.
	#
	# Along with this change you will also may need to set the Docker image
	# information below (search for START_OPENONU_ADAPTER_GO).
	use_openonu_adapter_go: false

	images:
	onos:
	repository: voltha/voltha-onos
	# IMAGE_SELECTION
	# ---------------
	# The helm chart used to deploy ONOS is the public ONOS helm chart so,
	# there is a need to specify the exact image repository and image tag.
	# If you would like to use the "master", "voltha-2.1", or other image
	# just replace the "tag" value below.
	tag: master

	# IMAGE_SELECTION
	# ---------------
	# Below are a list of all the images utilized by kind-voltha. This list is
	# provided as a conveinence if you would like to override on a per image
	# basis. If you are using the defaults, master, or voltha-2.1 branch there
	# is no need to utilize this list.
	# adapter_open_olt:
	# repository: voltha/voltha-openolt-adapter
	# tag: 2.1.1
	# adapter_open_onu:
	# repository: voltha/voltha-openonu-adapter
	# tag: 2.1.0
	# adapter_simulated_olt:
	# repository: voltha/voltha-adapter-simulated-olt
	# tag: 2.1.1
	# adapter_simulated_onu:
	# repository: voltha/voltha-adapter-simulated-onu
	# tag: 2.1.1
	# bbsim:
	# repository: voltha/bbsim
	# tag: master
	# START_OFAGENT_GO - Comment the following block to use the Python implementation
	# of the ofagent
	# ofagent_go:
	# repository: voltha/voltha-ofagent-go
	# tag: master
	# END_OFAGENT_GO
	# ofagent_py:
	# repository: voltha/voltha-ofagent-py
	# tag: 2.1.1
	# rw_core:
	# repository: voltha/voltha-rw-core
	# tag: 2.1.1
	# START_OPENONU_ADAPTER_GO - Uncomment the following block to use the Go implementation
	# of the openonu-adapter
	# adapter_open_onu_go:
	# repository: voltha-openonu-adapter-go
	# tag: master
	# END_OPENONU_ADAPTER_GO

	deployments:
	etcdOperator: true
	backupOperator: false
	restoreOperator: false

	voltha-etcd-cluster:
	clusterSize: 1
	autoCompactionRetention: 1

	kafka:
	configurationOverrides:
	"default.replication.factor": 1
	"offsets.topic.replication.factor": 1
	replicas: 1

	onos_env:
	- name: POD_IP
	valueFrom:
	fieldRef:
	fieldPath: status.podIP
	- name: NAMESPACE
	valueFrom:
	fieldRef:
	fieldPath: metadata.namespace
	- name: ONOS_APPS
	value: "drivers,openflow-base,hostprovider"

	# Customization for BBSIM
	kafka_broker: 'voltha-kafka.voltha.svc.cluster.local:9092'
	pon: 1
	onu: 1
	auth: true
	dhcp: true

	# SHOCK THE MONKEY OR LET LOSE THE DOGS OF WAR
	# The VOLTHA charts have support for adding extra labels to deployments and
	# pods. These extra labels can be used to integrate with other utilities
	# such as kube-monkey to add a bit of chaos to the cluster. Below are some
	# settings that can be uncommented to opt-in VOLTHA deployments/pods to
	# kube-monkey. For example, if you want ALL deployments and pods to opt-in
	# then uncomment the `extra_deployment_labels` and `extra_pod_label` blocks.
	# If you want to be more selected then comment the blocks that pertain to the
	# targets you care about.

	#extra_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#extra_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#rw_core_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#rw_core_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#ofagent_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#ofagent_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#openolt_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#openolt_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#openonu_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#openonu_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#simolt_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#simolt_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#simonu_deployment_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1
	#
	#simonu_pod_labels:
	# kube-monkey/enabled: enabled
	# kube-monkey/identifier: monkey-victim
	# kube-monkey/mtbf: 1
	# kube-monkey/kill-mode: fixed
	# kube-monkey/kill-value: 1