blob: 04cd2ff3ceadc1cdace0c00513227f682c075070 [file] [log] [blame]
#!/bin/bash
# Copyright 2019 Ciena Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# trap ctrl-c and call ctrl_c()
trap ctrl_c INT
function ctrl_c() {
tput cnorm
echo ""
echo "ctrl-c trapped"
echo "Thank you for trying 'votlha up'"
exit
}
VOLTCTL_VERSION=${VOLTCTL_VERSION:-0.0.5-dev}
KIND_VERSION=${KIND_VERSION:-v0.4.0}
_VOLTCTL_VERSION=$(echo $VOLTCTL_VERSION | sed -e 's/-/_/g')
BLACK=$(tput setaf 0)
RED=$(tput setaf 1)
GREEN=$(tput setaf 2)
YELLOW=$(tput setaf 3)
BLUE=$(tput setaf 4)
MAGENTA=$(tput setaf 5)
CYAN=$(tput setaf 6)
WHITE=$(tput setaf 7)
BOLD=$(tput bold)
NORMAL=$(tput sgr0)
ERROR="\xe2\x9c\x97\x20"
TYPE=${TYPE:-minimal}
WITH_BBSIM=${WITH_BBSIM:-no}
WITH_RADIUS=${WITH_RADIUS:-no}
WITH_ONOS=${WITH_ONOS:-yes}
WITH_TP=${WITH_TP:-yes}
JUST_K8S=${JUST_K8S:-no}
DEPLOY_K8S=${DEPLOY_K8S:-yes}
SKIP_RESTART_API=${SKIP_RESTART_API:-no}
INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes}
INSTALL_HELM=${INSTALL_HELM:-yes}
USE_GO=${USE_GO:-yes}
VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN}
VOLTHA_CHART=${VOLTHA_CHART:=onf/voltha}
VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated}
VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt}
VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu}
HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no")
HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"])
HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"])
if [ $HOSTARCH == "x86_64" ]; then
HOSTARCH="amd64"
fi
# Verify TYPE setting
if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}"
exit 1
fi
# Verify WITH_BBSIM settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$WITH_BBSIM:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$WITH_BBSIM value of '$WITH_BBSIM'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_BBSIM:") -eq 1 ]; then
WITH_BBSIM=yes
else
WITH_BBSIM=no
fi
# Verify WITH_RADIUS settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$WITH_RADIUS:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$WITH_RADIUS value of '$WITH_RADIUS'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_RADIUS:") -eq 1 ]; then
WITH_RADIUS=yes
else
WITH_RADIUS=no
fi
# Verify WITH_TP settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$WITH_TP:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$WITH_TP value of '$WITH_TP'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_TP:") -eq 1 ]; then
WITH_TP=yes
else
WITH_TP=no
fi
# Verify WITH_ONOS settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$WITH_ONOS:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$WITH_ONOS value of '$WITH_ONOS'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_ONOS:") -eq 1 ]; then
WITH_ONOS=yes
else
WITH_ONOS=no
fi
# Verify JUST_K8S settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$JUST_K8S:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$JUST_K8S value of '$JUST_K8S'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$JUST_K8S:") -eq 1 ]; then
JUST_K8S=yes
else
JUST_K8S=no
fi
# Verify DEPLOY_K8S settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$DEPLOY_K8S:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$DEPLOY_K8S value of '$DEPLOY_K8S'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$DEPLOY_K8S:") -eq 1 ]; then
DEPLOY_K8S=yes
else
DEPLOY_K8S=no
fi
# Verify INSTALL_KUBECTL settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$INSTALL_KUBECTL:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$INSTALL_KUBECTL value of '$INSTALL_KUBECTL'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$INSTALL_KUBECTL:") -eq 1 ]; then
INSTALL_KUBECTL=yes
else
INSTALL_KUBECTL=no
fi
# Verify SKIP_RESTART_API settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$SKIP_RESTART_API:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$SKIP_RESTART_API value of '$SKIP_RESTART_API'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$SKIP_RESTART_API:") -eq 1 ]; then
SKIP_RESTART_API=yes
else
SKIP_RESTART_API=no
fi
# Verify USE_GO settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$USE_GO:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$USE_GO value of '$USE_GO'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$USE_GO:") -eq 1 ]; then
USE_GO=true
else
USE_GO=false
fi
# Verify INSTALL_HELM settting and convert uniform value of yes or no
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$INSTALL_HELM:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$INSTALL_HELM value of '$INSTALL_HELM'. Should be 'yes' or 'no'${NORMAL}"
exit 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$INSTALL_HELM:") -eq 1 ]; then
INSTALL_HELM=yes
else
INSTALL_HELM=no
fi
if [ "$TYPE" == "full" ]; then
ONOS_API_PORT=${ONOS_API_PORT:-8182}
ONOS_SSH_PORT=${ONOS_SSH_PORT:-8102}
VOLTHA_API_PORT=${VOLTHA_API_PORT:-55556}
VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-5023}
else
ONOS_API_PORT=${ONOS_API_PORT:-8181}
ONOS_SSH_PORT=${ONOS_SSH_PORT:-8101}
VOLTHA_API_PORT=${VOLTHA_API_PORT:-55555}
VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-5022}
fi
if [ "$WITH_TP" == "yes" ]; then
SADIS_VER=3.1.0
OLT_VER=3.0.1
AAA_VER=1.9.0
DHCP_VER=1.6.0
else
SADIS_VER=2.2.0
OLT_VER=2.1.0
AAA_VER=1.8.0
DHCP_VER=1.5.0
fi
export SADIS_VER OLT_VER AAA_VER DHCP_VER
if [ "$1" == "get" -a "$2" == "voltconfig" ]; then
echo "$HOME/.volt/config-$TYPE"
exit
fi
if [ $# -ne 1 -o $(echo ":up:down:" | grep -c ":$1:") -ne 1 ]; then
>&2 echo "up or down?"
exit 1
fi
if [ "$1" == "down" ]; then
if [ $DEPLOY_K8S == "yes" ]; then
if [ -x ./bin/kind ]; then
exec ./bin/kind delete cluster --name voltha-$TYPE
else
>&2 echo "Kind doesn't seem to be installed, so nothing to do. Bye."
fi
else
EXISTS=$(helm list -q)
EXPECT="etcd-operator onos open-olt open-onu sim voltha bbsim radius"
INTERSECT=
for i in $EXISTS; do
if [ $(echo $EXPECT | grep -c $i) -eq 1 ]; then
HAVE="$HAVE $i"
fi
done
if [ "$HAVE X" != " X" ]; then
./bin/helm delete --purge $HAVE
fi
fi
exit
fi
LOG="install-$TYPE.log"
date > $LOG
# Output install options to log
echo "OPTIONS" >> $LOG
ALL_OPTIONS="TYPE WITH_BBSIM WITH_RADIUS WITH_ONOS WITH_TP JUST_K8S DEPLOY_K8S \
SKIP_RESTART_API INSTALL_KUBECTL INSTALL_HELM USE_GO VOLTHA_LOG_LEVEL \
VOLTHA_CHART VOLTHA_ADAPTER_SIM_CHART VOLTHA_ADAPTER_OPEN_OLT_CHART \
VOLTHA_ADAPTER_OPEN_ONU_CHART SADIS_VER OLT_VER AAA_VER DHCP_VER"
for O in $ALL_OPTIONS; do
VAL=$(eval echo \$$O)
if [ $O == "USE_GO" ]; then
VAL="$(echo $VAL| test $(grep -c true) -eq 1 && echo yes || echo no)"
fi
if [ ! -z "$VAL" ]; then
printf " %-30s = %s\n" $O $VAL >> $LOG
fi
done
spin() {
PARTS="\
\xe2\xa2\x8e\xe2\xa1\xb0 \
\xe2\xa2\x8e\xe2\xa1\xa1 \
\xe2\xa2\x8e\xe2\xa1\x91 \
\xe2\xa2\x8e\xe2\xa0\xb1 \
\xe2\xa0\x8e\xe2\xa1\xb1 \
\xe2\xa2\x8a\xe2\xa1\xb1 \
\xe2\xa2\x8c\xe2\xa1\xb1 \
\xe2\xa2\x86\xe2\xa1\xb1 \
"
IDX=1
tput civis
while true; do
C=$(echo $PARTS | cut '-d ' -f $IDX)
echo -en "$C"
IDX=$(expr $IDX + 1)
if [ $IDX -gt 8 ]; then
IDX=1
fi
sleep .15
echo -en "\r"
done
}
SPIN_PARTS="\
\xe2\xa2\x8e\xe2\xa1\xb0 \
\xe2\xa2\x8e\xe2\xa1\xa1 \
\xe2\xa2\x8e\xe2\xa1\x91 \
\xe2\xa2\x8e\xe2\xa0\xb1 \
\xe2\xa0\x8e\xe2\xa1\xb1 \
\xe2\xa2\x8a\xe2\xa1\xb1 \
\xe2\xa2\x8c\xe2\xa1\xb1 \
\xe2\xa2\x86\xe2\xa1\xb1 \
"
IDX=1
NOT_VERIFIED="\xe2\x9c\x97\x20"
VERIFIED="\xe2\x9c\x93\x20"
HELM="\xE2\x8E\x88"
OLD_KEY="\xF0\x9F\x97\x9D"
BIRD="\xF0\x9F\x90\xA6"
HIGH_VOLTAGE="\xE2\x9A\xA1"
PLUG="\xF0\x9F\xa7\xa9"
RESTART="\xf0\x9f\x94\x84"
FORWARD="\xE2\x87\xA8"
INSTALL="\xF0\x9F\x8F\x97"
STOP="\xf0\x9f\x9b\x91"
GO="\xf0\x9f\x9a\x80"
DOWNLOAD="\xf0\x9f\x93\xa5"
GEAR="\xe2\x9a\x99"
NO_ENTRY="\xe2\x9b\x94"
LOCK="\xf0\x9f\x94\x92"
bspin() {
tput civis
IDX=1
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
echo -en "$INDENT $*"
}
sspin() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX)
echo -en "\r$INDENT$C $*"
IDX=$(expr $IDX + 1)
if [ $IDX -gt 8 ]; then
IDX=1
fi
}
espin() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
echo -e "\r$INDENT$*"
tput cnorm
}
count_pods() {
local NAMESPACE=$1; shift
local PODS=$(kubectl -n $NAMESPACE get pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}")
local COUNT=0
local PATTERNS=$*
for POD in $PODS; do
local NAME=$(echo $POD | cut -d/ -f 1)
local STATE=$(echo $POD | cut -d/ -f 2)
local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g')
if [ "$STATE" == "Running" ]; then
local TOTAL=$(echo $CONTAINERS | wc -w)
local FOUND=$(echo $CONTAINERS | grep -o true | wc -l)
if [ $TOTAL -eq $FOUND ]; then
for PATTERN in $PATTERNS; do
if [[ $NAME =~ $PATTERN ]]; then
COUNT=$(expr $COUNT + 1)
fi
done
fi
fi
done
echo $COUNT
}
wait_for_pods() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=$1; shift
fi
local NAMESPACE=$1; shift
local EXPECT=$1; shift
local RETRY=$1; shift
local MESSAGE=$1; shift
local PATTERNS=$*
local HAVE=$(count_pods $NAMESPACE $PATTERNS)
COUNT=$(expr 300 / 15)
bspin $INDENT $MESSAGE
sspin $INDENT
if [ $HAVE -ne $EXPECT ]; then
while [ $HAVE -ne $EXPECT ]; do
sspin $INDENT
COUNT=$(expr $COUNT - 1)
if [ $COUNT -eq 0 ]; then
HAVE=$(count_pods $NAMESPACE $PATTERNS)
COUNT=$(expr 300 / 15)
fi
sleep .15
done
fi
espin $INDENT $VERIFIED
if [ $HAVE -ne $EXPECT ]; then
return 1
fi
return 0
}
helm_install() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=$1; shift
fi
local NAMESPACE=$1; shift
local NAME=$1; shift
local CHART=$1; shift
local MESSAGE=$*
COUNT=$(expr 300 / 15)
bspin $INDENT $MESSAGE
(set -x; helm install -f $TYPE-values.yaml --set use_go=$USE_GO --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $NAME $CHART >>$LOG 2>&1) >>$LOG 2>&1
SUCCESS=$?
while [ $SUCCESS -ne 0 ]; do
sspin $INDENT
COUNT=$(expr $COUNT - 1)
if [ $COUNT -eq 0 ]; then
(set -x; helm install -f $TYPE-values.yaml --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE --name $NAME $CHART >>$LOG 2>&1) >>$LOG 2>&1
COUNT=$(expr 300 / 15)
fi
sleep .15
done
espin $INDENT $VERIFIED
}
echo "INSTALL TYPE: $TYPE" >> $LOG
bspin "Verify GOPATH"
export GOPATH=$(pwd)
mkdir -p $GOPATH/bin
espin $VERIFIED
if [ "$INSTALL_KUBECTL" == "no" ]; then
bspin "Skip kubectl install"
espin $NO_ENTRY
else
bspin "Verify kubectl $HELM"
if [ -x $GOPATH/bin/kubectl ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "Download and install Kubernetes/kubectl $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$DEPLOY_K8S" == "no" ]; then
bspin "Skip Kubernetes/Kind Deployment"
espin $NO_ENTRY
else
bspin "Verify Kubernetes/Kind $HELM"
if [ -x $GOPATH/bin/kind ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "Download and install Kubernetes/kind $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$INSTALL_HELM" == "no" ]; then
bspin "Skip Helm Install"
espin $NO_ENTRY
else
bspin "Verify Helm $HELM"
if [ -x $GOPATH/bin/helm ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "Download and install Helm $DOWNLOAD"
(set -x; curl -sSL https://git.io/get_helm.sh | USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
bspin "Verify voltctl $HIGH_VOLTAGE"
if [ -x $GOPATH/bin/voltctl ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "Download and build voltctl $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/ciena/voltctl/releases/download/$VOLTCTL_VERSION/voltctl-$_VOLTCTL_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
bspin "Verify command PATH"
export PATH=$GOPATH/bin:$PATH
espin $VERIFIED
if [ "$DEPLOY_K8S" == "yes" ]; then
HAVE=$(kind get clusters | grep -c voltha-$TYPE)
bspin "Verify Kubernetes/Kind Cluster"
sspin
if [ $HAVE -eq 0 ]; then
espin $NOT_VERIFIED
bspin - "Verify cluster configuration"
if [ ! -r ./$TYPE-cluster.cfg ]; then
espin - $NOT_VERIFIED
bspin - "Download cluster configuration: $TYPE-cluster.cfg $DOWNLOAD"
(set -x; curl -o ./$TYPE-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/$TYPE-cluster.cfg >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
espin - $VERIFIED
fi
kind create cluster --name voltha-$TYPE --config $TYPE-cluster.cfg
else
espin $VERIFIED
fi
export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$TYPE")"
P="coredns-.* \
etcd-voltha-$TYPE-control-plane \
kindnet-.* \
kube-apiserver-voltha-$TYPE-control-plane \
kube-controller-manager-voltha-$TYPE-control-plane \
kube-proxy-.* \
kube-scheduler-voltha-$TYPE-control-plane"
EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14")
wait_for_pods - "kube-system" $EXPECT -1 "Waiting for system PODs to start" $P
fi
COUNT=$(count_pods "kube-system" "tiller-deploy-.*")
bspin "Verify Helm"
if [ $COUNT -ne 1 ]; then
espin $NOT_VERIFIED
echo -e "Configuring Helm $GEAR"
if [ "$INSTALL_HELM" == "no" ]; then
bspin - "Skip Helm/Tiller Initialization"
espin - $NO_ENTRY
else
bspin - "Initialize Helm"
(set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
wait_for_pods - "kube-system" 1 -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
fi
bspin - "Add Google Incubator repository to Helm"
(set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
# HACK (sort-of) - the config for tiller is about to be patched, which will
# cause the tiller pod to be recreated. This can sometimes cause a timing
# issue with the "wait_for_pods" call on tiller as it may incorrectly
# identify the running/ready tiller pod that is soon to be terminated as
# what it is waiting for. To avoid this issue we do a clean scale down and
# scale up of the pod so the script controlls when it should be expecting
# things
(set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1
bspin - "Add Google Stable repository to Helm"
(set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Add ONF repository to Helm"
(set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Update Helm repository cache"
(set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
# Create and k8s service account so that Helm can create pods
bspin - "Create Tiller ServiceAccount"
(set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Create Tiller ClusterRoleBinding"
(set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Update Tiller Manifest"
(set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1
# HACK (sort-of) - part to, spin it back up
(set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
espin $VERIFIED
fi
wait_for_pods - "kube-system" 1 -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
bspin "Verify Helm values file: $TYPE-values.yaml"
if [ ! -r "./$TYPE-values.yaml" ]; then
espin $NOT_VERIFIED
bspin - "Download Helm values file: $TYPE-values.yaml $DOWNLOAD"
(set -x; curl -o ./$TYPE-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/$TYPE-values.yaml >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
espin $VERIFIED
fi
if [ "$JUST_K8S" == "yes" ]; then
echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye."
echo ""
echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
echo "tools required by VOLTHA in your command path. " | tee -a $LOG
echo "" | tee -a $LOG
echo -en $BOLD
if [ $DEPLOY_K8S == "yes" ]; then
echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$TYPE\")\"" | tee -a $LOG
fi
echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
echo -en $NORMAL
echo "" | tee -a $LOG
echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
exit 0
fi
bspin "Verify ETCD Operator $OLD_KEY"
if [ $(helm list --deployed --short --namespace voltha "^etcd-operator\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
helm_install - voltha etcd-operator stable/etcd-operator "Install ETCD Operator"
else
espin $VERIFIED
fi
EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
wait_for_pods - "voltha" $EXPECT -1 "Waiting for ETCD Operator to start" "etcd-operator-.*"
if [ $WITH_ONOS == "yes" ]; then
bspin "Verify ONOS installed $BIRD"
if [ $(helm list --deployed --short --namespace default "^onos\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
helm_install - default onos onf/onos "Install ONOS"
else
espin $VERIFIED
fi
wait_for_pods - "default" 1 -1 "Waiting for ONOS to start" "onos-.*"
bspin - "Forward ONOS API port $FORWARD"
for i in $(screen -ls | grep onos-ui-$TYPE | awk '{print $1}'); do
(set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
done
(set -x; screen -dmS onos-ui-$TYPE bash -c "while true; do kubectl port-forward service/onos-ui $ONOS_API_PORT:8181; done" >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Forward ONOS SSH port $FORWARD"
for i in $(screen -ls | grep onos-ssh-$TYPE | awk '{print $1}'); do
(set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
done
(set -x; screen -dmS onos-ssh-$TYPE bash -c "while true; do kubectl port-forward service/onos-ssh $ONOS_SSH_PORT:8101; done" >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
if [ ! -x ./onos-files/install-onos-applications.sh ]; then
bspin - "Verify or download ONOS configuration support files $DOWNLOAD"
(set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1
for i in dhcp-to-controller-flow.json install-onos-applications.sh olt-onos-enableExtraneousRules.json olt-onos-netcfg.json olt-onos-olt-settings.json radius-config.json; do
if [ ! -r ./onos-files/$i ]; then
(set -x; curl -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/master/onos-files/$i >>$LOG 2>&1) >>$LOG 2>&1
fi
done
(set -x; chmod 755 ./onos-files/install-onos-applications.sh >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
bspin - "Install required ONOS applications $INSTALL"
(set -x; ./onos-files/install-onos-applications.sh >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
bspin "Verify VOLTHA installed $HIGH_VOLTAGE"
if [ $(helm list --deployed --short --namespace voltha "^voltha\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
helm_install - voltha voltha $VOLTHA_CHART "Install VOLTHA Core"
else
espin $VERIFIED
fi
VOLTHA="ofagent-.* \
ro-core.* \
rw-core.* \
voltha-api-server-.* \
voltha-cli-server-.* \
voltha-etcd-cluster-.* \
voltha-kafka-.* \
voltha-zookeeper-.*"
EXPECT=$(test "$TYPE" == "minimal" && echo "9" || echo "11")
wait_for_pods - "voltha" $EXPECT -1 "Waiting for VOLTHA Core to start" $VOLTHA
echo -e "Verify Adapters $PLUG"
bspin - "Verify Simulated Adapters installed"
if [ $(helm list --deployed --short --namespace voltha "^sim\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - voltha sim $VOLTHA_ADAPTER_SIM_CHART "Install Simulated Adapters"
else
espin - $VERIFIED
fi
bspin - "Verify OpenOLT Adapter installed"
if [ $(helm list --deployed --short --namespace voltha "^open-olt\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - voltha open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART "Install OpenOLT Adapter"
else
espin - $VERIFIED
fi
bspin - "Verify OpenONU Adapter installed"
if [ $(helm list --deployed --short --namespace voltha "^open-onu\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - voltha open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART "Install OpenONU Adapter"
else
espin - $VERIFIED
fi
ADAPTERS="adapter-.*"
wait_for_pods - "voltha" 4 -1 "Waiting for adapters to start" $ADAPTERS
if [ $WITH_BBSIM == "yes" ]; then
echo -e "Verify BBSIM $PLUG"
bspin - "Verify BBSIM Installed"
if [ $(helm list --deployed --short --namespace voltha "^bbsim\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - voltha bbsim onf/bbsim "Install BBSIM"
else
espin - $VERIFIED
fi
wait_for_pods - "voltha" 1 -1 "Waiting for BBSIM to start" "bbsim-.*"
fi
if [ $WITH_RADIUS == "yes" ]; then
echo -e "Verify RADIUS $LOCK"
bspin - "Verify RADIUS Installed"
if [ $(helm list --deployed --short --namespace voltha "^radius\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - voltha radius onf/freeradius "Install RADIUS"
else
espin - $VERIFIED
fi
wait_for_pods - "voltha" 1 -1 "Waiting for RADIUS to start" "radius-.*"
fi
if [ $SKIP_RESTART_API == "no" ]; then
echo -e "Restart VOLTHA API $RESTART"
API="voltha-api-server-.* ofagent-.*"
(set -x; kubectl scale --replicas=0 deployment -n voltha voltha-api-server ofagent >>$LOG 2>&1) >>$LOG 2>&1
wait_for_pods - "voltha" 0 -1 "Wait for API to stop $STOP" $API
(set -x; kubectl scale --replicas=1 deployment -n voltha voltha-api-server ofagent >>$LOG 2>&1) >>$LOG 2>&1
wait_for_pods - "voltha" 2 -1 "Wait for API to re-start $GO" $API
else
bspin "Skip VOLTHA API Restart"
espin $NO_ENTRY
fi
bspin - "Forward VOLTHA API port $FORWARD"
for i in $(screen -ls | grep voltha-api-$TYPE | awk '{print $1}'); do
(set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
done
(set -x; screen -dmS voltha-api-$TYPE bash -c "while true; do kubectl port-forward -n voltha service/voltha-api $VOLTHA_API_PORT:55555; done" >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Forward VOLTHA SSH port $FORWARD"
for i in $(screen -ls | grep voltha-ssh-$TYPE | awk '{print $1}'); do
(set -x; screen -X -S $i quit >>$LOG 2>&1) >>$LOG 2>&1
done
(set -x; screen -dmS voltha-ssh-$TYPE bash -c "while true; do kubectl port-forward -n voltha service/voltha-cli $VOLTHA_SSH_PORT:5022; done" >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
if [ $WITH_ONOS == "yes" -a $WITH_RADIUS == "yes" ]; then
bspin "Configure ONOS RADIUS Connection $GEAR"
(set -x; cat onos-files/radius-config.json | sed -e "s/:RADIUS_IP:/$(kubectl -n voltha get service/radius -o jsonpath={.spec.clusterIP})/g" | curl -XPOST -sSL http://karaf:karaf@localhost:8181/onos/v1/network/configuration -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1
espin $VERIFIED
fi
bspin "Create voltctl configuration file"
(set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1
(set -x; voltctl -a v2 -s localhost:$VOLTHA_API_PORT config > $HOME/.volt/config-$TYPE 2>>$LOG) >>$LOG 2>&1
espin $VERIFIED
if [ ! -f "$TYPE-env.sh" ]; then
touch $TYPE-env.sh
fi
for O in $ALL_OPTIONS; do
VAL=$(eval echo \$$O)
if [ $O == "USE_GO" ]; then
VAL="$(echo $VAL| test $(grep -c true) -eq 1 && echo yes || echo no)"
fi
if [ ! -z "$VAL" -a $(grep -c "^export $O=" $TYPE-env.sh) -eq 0 ]; then
echo "export $O=\"$(eval echo \$$O)\"" >> $TYPE-env.sh
fi
done
if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $TYPE-env.sh) -eq 0 ]; then
echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$TYPE)\"" >> $TYPE-env.sh
fi
if [ $(grep -c "^export VOLTCONFIG=" $TYPE-env.sh) -eq 0 ]; then
echo "export VOLTCONFIG=\"$HOME/.volt/config-$TYPE\"" >> $TYPE-env.sh
fi
if [ $(grep -c "^export PATH=" $TYPE-env.sh) -eq 0 ]; then
echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $TYPE-env.sh
fi
echo ""
echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
echo "tools required by VOLTHA in your command path. " | tee -a $LOG
echo "" | tee -a $LOG
echo -en $BOLD
if [ $DEPLOY_K8S == "yes" ]; then
echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$TYPE\")\"" | tee -a $LOG
fi
echo "export VOLTCONFIG=\"$HOME/.volt/config-$TYPE\"" | tee -a $LOG
echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
echo -en $NORMAL
echo "" | tee -a $LOG
echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG