| #!/bin/bash |
| # Copyright 2019 Ciena Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| set -f |
| unalias -a |
| shopt -s extglob |
| TOTAL_START_TIME="$(date +%s)" |
| |
| FANCY=${FANCY:-1} |
| if [ "$TERM X" == " X" ]; then |
| FANCY=0 |
| fi |
| |
| # trap ctrl-c and call ctrl_c() |
| trap ctrl_c INT |
| |
| function ctrl_c() { |
| echo -en "$CNORM" |
| echo "" |
| echo "ctrl-c trapped" |
| echo "Thank you for trying 'voltha up'" |
| exit |
| } |
| |
| HELM_VERSION=${HELM_VERSION:-v2.14.3} |
| VOLTCTL_VERSION=${VOLTCTL_VERSION:-latest} |
| KIND_VERSION=${KIND_VERSION:-v0.5.1} |
| VK_RELEASE=${VK_RELEASE:-master} |
| EXTRA_TOOLS= |
| |
| RED= |
| GREEN= |
| YELLOW= |
| BLUE= |
| BOLD= |
| NORMAL= |
| ERROR= |
| CEOL= |
| CNORM= |
| CIVIS= |
| if [ "$FANCY" -eq 1 ]; then |
| RED="$(tput setaf 1)" |
| GREEN="$(tput setaf 2)" |
| YELLOW="$(tput setaf 3)" |
| BLUE="$(tput setaf 4)" |
| BOLD="$(tput bold)" |
| NORMAL="$(tput sgr0)" |
| ERROR="\xe2\x9c\x97\x20" |
| CEOL="$(tput el)" |
| CNORM="$(tput cnorm)" |
| CIVIS="$(tput civis)" |
| fi |
| |
| TYPE=${TYPE:-minimal} |
| NAME=${NAME:-$TYPE} |
| |
| ENABLE_ONOS_EXTRANEOUS_RULES=${ENABLE_ONOS_EXTRANEOUS_RULES:-no} |
| INFRA_NS=${INFRA_NS:-default} |
| VOLTHA_NS=${VOLTHA_NS:-voltha} |
| BBSIM_NS=${BBSIM_NS:-voltha} |
| ADAPTER_NS=${ADAPTER_NS:-voltha} |
| WITH_TIMINGS=${WITH_TIMINGS:-no} |
| WITH_BBSIM=${WITH_BBSIM:-no} |
| WITH_EFK=${WITH_EFK:-no} |
| WITH_RADIUS=${WITH_RADIUS:-no} |
| WITH_EAPOL=${WITH_EAPOL:-yes} |
| WITH_DHCP=${WITH_DHCP:-yes} |
| WITH_IGMP=${WITH_IGMP:-no} |
| WITH_ONOS=${WITH_ONOS:-yes} |
| NUM_OF_ONOS=${NUM_OF_ONOS:-1} |
| NUM_OF_ATOMIX=${NUM_OF_ATOMIX:-0} |
| WITH_CHAOS=${WITH_CHAOS:-no} |
| WITH_ADAPTERS=${WITH_ADAPTERS:-yes} |
| WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-no} |
| WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes} |
| WITH_PORT_FORWARDS=${WITH_PORT_FORWARDS:-yes} |
| WITH_KAFKA=${WITH_KAFKA:-yes} |
| WITH_ETCD=${WITH_ETCD:-yes} |
| WITH_PPROF=${WITH_PPROF:-no} |
| WITH_INCREMENTAL_EVTO_UPDATE=${WITH_INCREMENTAL_EVTO_UPDATE:-no} |
| SCHEDULE_ON_CONTROL_NODES=${SCHEDULE_ON_CONTROL_NODES:-no} |
| CONFIG_SADIS=${CONFIG_SADIS:-no} # yes | no | file | bbsim | external | URL |
| SADIS_CFG=${SADIS_CFG:-onos-files/onos-sadis-sample.json} |
| INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no} |
| JUST_K8S=${JUST_K8S:-no} |
| DEPLOY_K8S=${DEPLOY_K8S:-yes} |
| INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes} |
| INSTALL_HELM=${INSTALL_HELM:-yes} |
| HELM_USE_UPGRADE=${HELM_USE_UPGRADE:-no} |
| UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes} |
| WAIT_ON_DOWN=${WAIT_ON_DOWN:-yes} |
| WAIT_TIMEOUT=${WAIT_TIMEOUT:-30m} |
| VOLTHA_DOWN_ON_TIMEOUT=${VOLTHA_DOWN_ON_TIMEOUT:-no} |
| VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN} |
| VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha} |
| VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest} |
| VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim} |
| VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest} |
| ELASTICSEARCH_CHART=${ELASTICSEARCH_CHART:-elastic/elasticsearch} |
| ELASTICSEARCH_CHART_VERSION=${ELASTICSEARCH_CHART_VERSION:-latest} |
| KIBANA_CHART=${KIBANA_CHART:-elastic/kibana} |
| KIBANA_CHART_VERSION=${KIBANA_CHART_VERSION:-latest} |
| FLUENTD_ELASTICSEARCH_CHART=${FLUENTD_ELASTICSEARCH_CHART:-kiwigrid/fluentd-elasticsearch} |
| FLUENTD_ELASTICSEARCH_CHART_VERSION=${FLUENTD_ELASTICSEARCH_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated} |
| VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt} |
| VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest} |
| VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu} |
| VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest} |
| ONOS_CHART=${ONOS_CHART:-onf/onos} |
| ONOS_CHART_VERSION=${ONOS_CHART_VERSION:-latest} |
| ONOS_CLASSIC_CHART=${ONOS_CLASSIC_CHART:-onos/onos-classic} |
| ONOS_CLASSIC_CHART_VERSION=${ONOS_CLASSIC_CHART_VERSION:-latest} |
| KAFKA_CHART=${KAFKA_CHART:-incubator/kafka} |
| KAFKA_CHART_VERSION=${KAFKA_CHART_VERSION:=0.15.3} |
| BBSIM_SADIS_SERVER_CHART=${BBSIM_SADIS_SERVER_CHART:-bbsim-sadis/bbsim-sadis-server} |
| BBSIM_SADIS_SERVER_CHART_VERSION=${BBSIM_SADIS_SERVER_CHART_VERSION:-latest} |
| ETCD_CHART=${ETCD_CHART:-incubator/etcd} |
| ETCD_CHART_VERSION=${ETCD_CHART_VERSION:-latest} |
| RADIUS_CHART=${RADIUS_CHART:-onf/freeradius} |
| RADIUS_CHART_VERSION=${RADIUS_CHART_VERSION:-latest} |
| EXTRA_HELM_INSTALL_ARGS=${EXTRA_HELM_INSTALL_ARGS:-} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| NUM_OF_BBSIM=${NUM_OF_BBSIM:-1} |
| NUM_OF_OPENONU=${NUM_OF_OPENONU:-1} |
| MAX_NUM_OF_BBSIM=10 |
| MAX_NUM_OF_OPENONU=10 |
| LEGACY_BBSIM_INDEX=${LEGACY_BBSIM_INDEX:-no} |
| |
| HOSTOS="$(uname -s | tr "[:upper:]" "[:lower:"])" |
| HOSTARCH="$(uname -m | tr "[:upper:]" "[:lower:"])" |
| if [ "$HOSTARCH" == "x86_64" ]; then |
| HOSTARCH="amd64" |
| fi |
| BBSIM_LABEL="-l app=bbsim" |
| NO_LABEL= |
| |
| # check number (range) of bbsim, max bbsim must not exceed 10 instances! |
| # note: instances will be numbered from 0 to 9 |
| if [ "$1" == "up" ]; then |
| if [ "$NUM_OF_BBSIM" -lt 1 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM (${NUM_OF_BBSIM}) is less than 1${NORMAL}" |
| exit 1 |
| fi |
| if [ "$NUM_OF_BBSIM" -gt "$MAX_NUM_OF_BBSIM" ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM (${NUM_OF_BBSIM}) is greater than $MAX_NUM_OF_BBSIM${NORMAL}" |
| exit 1 |
| fi |
| |
| if [ "$NUM_OF_OPENONU" -lt 1 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of OPENONU instances. NUM_OF_OPENONU (${NUM_OF_OPENONU}) is less than 1${NORMAL}" |
| exit 1 |
| fi |
| if [ "$NUM_OF_OPENONU" -gt "$MAX_NUM_OF_OPENONU" ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of OPENONU instances. NUM_OF_OPENONU (${NUM_OF_OPENONU}) is greater than $MAX_NUM_OF_OPENONU${NORMAL}" |
| exit 1 |
| fi |
| fi |
| # Verify TYPE setting |
| if [ "$(echo ":minimal:full:" | grep -ic ":$TYPE:")" -eq 0 ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}" |
| exit 1 |
| fi |
| |
| # checks to see if a given WORD is in the given LIST of words |
| function is_in() { |
| local WORD LIST |
| WORD="$1"; shift |
| LIST="$*" |
| LIST=${LIST//+([[:space:],|])/:} |
| |
| [ "$(echo ":$LIST:" | grep -ic ":$WORD:")" -ne 0 ] |
| } |
| |
| function parseDuration() { |
| local DUR RESULT TERM TERMS VALUE UNIT |
| DUR=$1 |
| RESULT=0 |
| TERMS="$(echo "$DUR" | sed -Ee 's/([sSmMhHdD])/\1 /g' -e 's/,$//g')" |
| for TERM in $TERMS; do |
| VALUE="$(echo "$TERM" | sed -Ee 's/([0-9]+)[sSmMhHdD]/\1/')" |
| UNIT="$(echo "$TERM" | sed -Ee 's/[0-9]+([sSmMhHdD])/\1/')" |
| case $UNIT in |
| s|S) |
| RESULT=$((RESULT + VALUE)) ;; |
| m|M) |
| RESULT=$((RESULT + (VALUE * 60))) ;; |
| h|H) |
| RESULT=$((RESULT + (VALUE * 3600))) ;; |
| d|D) |
| RESULT=$((RESULT + (VALUE * 86400))) ;; |
| *) ;; |
| esac |
| done |
| echo $RESULT |
| } |
| |
| function doTimeout() { |
| local MSG=$1 |
| 2>&1 echo -e "\n${RED}${BOLD}${ERROR}TIMEOUT:${NORMAL}${RED} Operation timed out after '$WAIT_TIMEOUT': $MSG" |
| exit 125 |
| } |
| |
| function get_service_ep() { |
| local NS=$1 |
| local NAME=$2 |
| kubectl -n "$NS" get service "$NAME" -o json | jq -r '.spec.clusterIP + ":" + (.spec.ports[0].port|tostring)' |
| } |
| |
| # Used to verify configuration values are set to "yes" or "no" value or convert |
| # equivalents to "yes" or "no" |
| YES="y,yes,t,true,1" |
| NO="n,no,f,false,0" |
| YES_OR_NO="$YES,$NO" |
| |
| # If the given VAR matches a truth value then normalize that |
| # value, else return original value |
| function normalize_yes_no() { |
| local VAR VAL |
| VAR=$1 |
| VAL="$(eval echo "\$$VAR")" |
| if ! is_in "$VAL" "$YES_OR_NO"; then |
| echo "$VAL" |
| return 1 |
| fi |
| if is_in "$VAL" "$YES"; then |
| echo "yes" |
| else |
| echo "no" |
| fi |
| return 0 |
| } |
| |
| # If the given VAR matches a truth value then normalize that |
| # value, else display an error |
| function verify_yes_no() { |
| local VAR VAL |
| VAR=$1 |
| VAL="$(eval echo "\$$VAR")" |
| if ! is_in "$VAL" "$YES_OR_NO"; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}" |
| echo "INVALID" |
| return 1 |
| fi |
| if is_in "$VAL" "$YES"; then |
| echo "yes" |
| else |
| echo "no" |
| fi |
| return 0 |
| } |
| |
| ALL_YES_NO="\ |
| ENABLE_ONOS_EXTRANEOUS_RULES \ |
| WITH_TIMINGS \ |
| WITH_BBSIM \ |
| WITH_EFK \ |
| WITH_EAPOL \ |
| WITH_DHCP \ |
| WITH_IGMP \ |
| WITH_CHAOS \ |
| WITH_ADAPTERS \ |
| WITH_SIM_ADAPTERS \ |
| WITH_OPEN_ADAPTERS \ |
| WITH_PORT_FORWARDS \ |
| WITH_PPROF \ |
| WITH_INCREMENTAL_EVTO_UPDATE \ |
| JUST_K8S \ |
| DEPLOY_K8S \ |
| INSTALL_ONOS_APPS \ |
| INSTALL_KUBECTL \ |
| INSTALL_HELM \ |
| HELM_USE_UPGRADE \ |
| UPDATE_HELM_REPOS \ |
| WAIT_ON_DOWN \ |
| VOLTHA_DOWN_ON_TIMEOUT \ |
| LEGACY_BBSIM_INDEX \ |
| SCHEDULE_ON_CONTROL_NODES \ |
| " |
| |
| OPT_YES_NO="\ |
| CONFIG_SADIS \ |
| WITH_KAFKA \ |
| WITH_RADIUS \ |
| WITH_ETCD \ |
| WITH_ONOS \ |
| " |
| |
| ALL_OPTIONS="\ |
| NAME \ |
| TYPE \ |
| $ALL_YES_NO \ |
| $OPT_YES_NO \ |
| WAIT_TIMEOUT \ |
| VOLTHA_LOG_LEVEL \ |
| VOLTHA_CHART \ |
| VOLTHA_CHART_VERSION \ |
| VOLTHA_BBSIM_CHART \ |
| VOLTHA_BBSIM_CHART_VERSION \ |
| BBSIM_SADIS_SERVER_CHART \ |
| BBSIM_SADIS_SERVER_CHART_VERSION \ |
| NUM_OF_BBSIM \ |
| ELASTICSEARCH_CHART \ |
| ELASTICSEARCH_CHART_VERSION \ |
| KIBANA_CHART \ |
| KIBANA_CHART_VERSION \ |
| FLUENTD_ELASTICSEARCH_CHART \ |
| FLUENTD_ELASTICSEARCH_CHART_VERSION \ |
| NUM_OF_OPENONU \ |
| VOLTHA_ADAPTER_SIM_CHART \ |
| VOLTHA_ADAPTER_SIM_CHART_VERSION \ |
| VOLTHA_ADAPTER_OPEN_OLT_CHART \ |
| VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \ |
| VOLTHA_ADAPTER_OPEN_ONU_CHART \ |
| VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \ |
| ONOS_CHART \ |
| ONOS_CHART_VERSION \ |
| ONOS_CLASSIC_CHART \ |
| ONOS_CLASSIC_CHART_VERSION \ |
| KAFKA_CHART \ |
| KAFKA_CHART_VERSION \ |
| ETCD_CHART \ |
| ETCD_CHART_VERSION \ |
| RADIUS_CHART \ |
| RADIUS_CHART_VERSION \ |
| ONOS_API_PORT \ |
| ONOS_SSH_PORT \ |
| SADIS_CFG \ |
| VOLTHA_API_PORT \ |
| VOLTHA_SSH_PORT \ |
| VOLTHA_ETCD_PORT \ |
| ELASTICSEARCH_PORT \ |
| KIBANA_PORT \ |
| VOLTHA_KAFKA_PORT \ |
| VOLTHA_PPROF_PORT \ |
| OPENOLT_PPROF_PORT \ |
| OFAGENT_PPROF_PORT \ |
| VK_RELEASE \ |
| KIND_VERSION \ |
| VOLTCTL_VERSION \ |
| HELM_VERSION \ |
| NUM_OF_ONOS \ |
| NUM_OF_ATOMIX \ |
| VOLTHA_NS \ |
| ADAPTER_NS \ |
| INFRA_NS \ |
| BBSIM_NS \ |
| SADIS_BANDWIDTH_PROFILES \ |
| SADIS_SUBSCRIBERS \ |
| " |
| |
| # Iterate over yes/no configuration options and validate |
| for VAR in $ALL_YES_NO; do |
| eval "$VAR"="$(verify_yes_no "$VAR")" |
| if [ "$(eval echo "\$$VAR")" == "INVALID" ]; then |
| exit 1; |
| fi |
| done |
| |
| # Iterate over optional yes/no configuration options and |
| # normalize values if they are truth values |
| for VAR in $OPT_YES_NO; do |
| eval "$VAR"="$(normalize_yes_no "$VAR")" |
| done |
| |
| # normalize non-truth value options |
| if is_in "$WITH_KAFKA" "e,external"; then |
| WITH_KAFKA="external" |
| fi |
| if is_in "$WITH_ETCD" "e,external"; then |
| WITH_ETCD="external" |
| fi |
| if is_in "$WITH_ONOS" "l,legacy"; then |
| WITH_ONOS="legacy" |
| elif is_in "$WITH_ONOS" "c,classic"; then |
| WITH_ONOS="classic" |
| elif is_in "$WITH_ONOS" "u,m,micro"; then |
| WITH_ONOS="micro" |
| fi |
| |
| if [ "$WITH_ONOS" == "micro" ]; then |
| >&2 echo -e "${YELLOW}${BOLD}${ERROR}WARNING:${NORMAL}${YELLOW} The value specified as WITH_ONOS, '$WITH_ONOS', is not valid.${NORMAL}" |
| exit 1 |
| fi |
| |
| if is_in "$WITH_ONOS" "yes,classic"; then |
| # there is an extra utility required if we are using ONOS CLASSIC as |
| # the chart for classic specifies images differently |
| EXTRA_TOOLS+=" yq" |
| fi |
| |
| if [ "$LEGACY_BBSIM_INDEX" == "no" ]; then |
| BBSIM_SADIS_SVC="bbsim0" |
| else |
| BBSIM_SADIS_SVC="bbsim" |
| fi |
| |
| SADIS_SUBSCRIBERS=${SADIS_SUBSCRIBERS:-http://$BBSIM_SADIS_SVC.$VOLTHA_NS.svc:50074/v2/subscribers/%s} |
| SADIS_BANDWIDTH_PROFILES=${SADIS_BANDWIDTH_PROFILES:-http://$BBSIM_SADIS_SVC.$VOLTHA_NS.svc:50074/v2/bandwidthprofiles/%s} |
| |
| if [ "$HELM_USE_UPGRADE" == "yes" ]; then |
| _HELM_DESC="Upgrade/Install" |
| else |
| _HELM_DESC="Install" |
| fi |
| |
| # Check for prerequiste tools |
| TOOLS="curl sed jq $EXTRA_TOOLS" |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| TOOLS+=" docker" |
| fi |
| NOT_FOUND="" |
| for T in $TOOLS; do |
| if [ -z "$(command -v "$T")" ]; then |
| NOT_FOUND+=" $T" |
| fi |
| done |
| |
| if [ -n "$NOT_FOUND" ]; then |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} The following required tools where not found, please install them:$NOT_FOUND" |
| exit 1 |
| fi |
| |
| TIMEOUT_SECONDS="$(parseDuration "$WAIT_TIMEOUT")" |
| |
| mkdir -p .voltha |
| touch .voltha/ports |
| HAVE="$(grep "$NAME" .voltha/ports)" |
| if [ "$HAVE X" == " X" ]; then |
| # Find free port prefix |
| START=81 |
| while true; do |
| if [ "$(grep -c $START .voltha/ports)" -eq 0 ]; then |
| break |
| fi |
| START="$((START + 1))" |
| done |
| DELTA="$((START - 81))" |
| ONOS_API_PORT=${ONOS_API_PORT:-${START}81} |
| ONOS_SSH_PORT=${ONOS_SSH_PORT:-${START}01} |
| VOLTHA_API_PORT=${VOLTHA_API_PORT:-5$((55 + DELTA))55} |
| VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$((50 + DELTA))22} |
| VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$((23 + DELTA))79} |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$((90 + DELTA))92} |
| VOLTHA_PPROF_PORT=${VOLTHA_PPROF_PORT:-$((60 + DELTA))60} |
| OPENOLT_PPROF_PORT=${OPENOLT_PPROF_PORT:-$((60 + DELTA))61} |
| OFAGENT_PPROF_PORT=${OFAGENT_PPROF_PORT:-$((60 + DELTA))62} |
| ELASTICSEARCH_PORT=${ELASTICSEARCH_PORT:-$((92 + DELTA))00} |
| KIBANA_PORT=${KIBANA_PORT:-$((56 + DELTA))01} |
| else |
| VALUES="$(echo "$HAVE" | sed -e 's/\s//g' | cut -d= -f2)" |
| ONOS_API_PORT=${ONOS_API_PORT:-$(echo "$VALUES" | cut -d, -f1)} |
| ONOS_SSH_PORT=${ONOS_SSH_PORT:-$(echo "$VALUES" | cut -d, -f2)} |
| VOLTHA_API_PORT=${VOLTHA_API_PORT:-$(echo "$VALUES" | cut -d, -f3)} |
| VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(echo "$VALUES" | cut -d, -f4)} |
| VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(echo "$VALUES" | cut -d, -f5)} |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(echo "$VALUES" | cut -d, -f6)} |
| VOLTHA_PPROF_PORT=${VOLTHA_PPROF_PORT:-$(echo "$VALUES" | cut -d, -f7)} |
| OPENOLT_PPROF_PORT=${OPENOLT_PPROF_PORT:-$(echo "$VALUES" | cut -d, -f8)} |
| OFAGENT_PPROF_PORT=${OFAGENT_PPROF_PORT:-$(echo "$VALUES" | cut -d, -f9)} |
| ELASTICSEARCH_PORT=${ELASTICSEARCH_PORT:-$(echo "$VALUES" | cut -d, -f10)} |
| KIBANA_PORT=${KIBANA_PORT:-$(echo "$VALUES" | cut -d, -f11)} |
| |
| # Some ports were added after the .voltha/ports files was created. |
| # Calculate the original DELTA from the VOLTHA_SSH_PORT so that it can |
| # be used to set up newer port-forwards. |
| DELTA="$((VOLTHA_SSH_PORT/100-50))" |
| |
| if [ -z "$VOLTHA_KAFKA_PORT" ]; then |
| VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$((90 + DELTA))92} |
| fi |
| |
| if [ -z "$VOLTHA_PPROF_PORT" ]; then |
| VOLTHA_PPROF_PORT=${VOLTHA_PPROF_PORT:-$((60 + DELTA))60} |
| fi |
| if [ -z "$OPENOLT_PPROF_PORT" ]; then |
| OPENOLT_PPROF_PORT=${OPENOLT_PPROF_PORT:-$((60 + DELTA))61} |
| fi |
| if [ -z "$OFAGENT_PPROF_PORT" ]; then |
| OFAGENT_PPROF_PORT=${OFAGENT_PPROF_PORT:-$((60 + DELTA))62} |
| fi |
| |
| if [ -z "$ELASTICSEARCH_PORT" ]; then |
| ELASTICSEARCH_PORT=${ELASTICSEARCH_PORT:-$((92 + DELTA))00} |
| fi |
| |
| if [ -z "$KIBANA_PORT" ]; then |
| KIBANA_PORT=${KIBANA_PORT:-$((56 + DELTA))01} |
| fi |
| fi |
| |
| PORTTMP="$(mktemp -u)" |
| grep -v "$NAME" .voltha/ports > "$PORTTMP" |
| echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT,$VOLTHA_KAFKA_PORT,$VOLTHA_PPROF_PORT,$OPENOLT_PPROF_PORT,$OFAGENT_PPROF_PORT,$ELASTICSEARCH_PORT,$KIBANA_PORT" >> "$PORTTMP" |
| cp "$PORTTMP" .voltha/ports |
| rm -f "$PORTTMP" |
| |
| export ONOS_API_PORT ONOS_SSH_PORT |
| |
| IDX=1 |
| CLOCK="TIME:" |
| SPIN_PARTS= |
| NOT_VERIFIED= |
| THEX= |
| BUILD= |
| VERIFIED= |
| HELM= |
| OLD_KEY= |
| BIRD= |
| HIGH_VOLTAGE= |
| PLUG= |
| FORWARD= |
| GO= |
| DOWNLOAD= |
| GEAR= |
| NO_ENTRY= |
| LOCK= |
| |
| if [ "$FANCY" -eq 1 ]; then |
| SPIN_PARTS="\xe2\xa2\x8e\xe2\xa1\xb0 \xe2\xa2\x8e\xe2\xa1\xa1 \xe2\xa2\x8e\xe2\xa1\x91 \xe2\xa2\x8e\xe2\xa0\xb1 \xe2\xa0\x8e\xe2\xa1\xb1 \xe2\xa2\x8a\xe2\xa1\xb1 \xe2\xa2\x8c\xe2\xa1\xb1 \xe2\xa2\x86\xe2\xa1\xb1" |
| CLOCK="\xe2\x8f\xb1" |
| THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}" |
| BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}" |
| NOT_VERIFIED="$BUILD" |
| VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}" |
| HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}" |
| OLD_KEY="\xF0\x9F\x97\x9D" |
| BIRD="\xF0\x9F\x90\xA6" |
| HIGH_VOLTAGE="\xE2\x9A\xA1" |
| PLUG="\xF0\x9F\xa7\xa9" |
| FORWARD="\xE2\x87\xA8" |
| GO="\xf0\x9f\x9a\x80" |
| DOWNLOAD="\xf0\x9f\x93\xa5" |
| GEAR="\xe2\x9a\x99" |
| NO_ENTRY="\xe2\x9b\x94" |
| LOCK="\xf0\x9f\x94\x92" |
| fi |
| |
| duration() { |
| local h m s t |
| h="$(($1 / 3600))" |
| m="$(($1 % 3600 / 60))" |
| s="$(($1 % 60))" |
| t="" |
| |
| if [ "$h" -gt 0 ]; then |
| t="$t${h}h" |
| fi |
| if [ "$m" -gt 0 ]; then |
| t="$t${m}m" |
| fi |
| echo "$t${s}s" |
| } |
| |
| printtime() { |
| local INDENT |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| echo -e "$INDENT $CLOCK $(duration "$1")" |
| } |
| |
| bspin() { |
| IDX=1 |
| local INDENT |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ "$FANCY" -eq 0 ]; then |
| LINE="${*//[[:space:]+-]}" |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$CIVIS$INDENT$*" |
| else |
| echo -en "$CIVIS$INDENT $*" |
| fi |
| } |
| |
| sspin() { |
| local INDENT |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ "$FANCY" -eq 0 ]; then |
| LINE="${*//[[:space:]+-]}" |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$INDENT$*" |
| else |
| C="$(echo "$SPIN_PARTS" | cut '-d ' -f "$IDX")" |
| echo -en "\r$INDENT$C $*" |
| IDX="$((IDX + 1))" |
| if [ "$IDX" -gt 8 ]; then |
| IDX=1 |
| fi |
| fi |
| } |
| |
| espin() { |
| local INDENT |
| if [ "$1" == "-" ]; then |
| INDENT=" " |
| shift |
| fi |
| if [ "$FANCY" -eq 0 ]; then |
| LINE="${*//[[:space:]+-]}" |
| if [ "$LINE X" == " X" ]; then |
| return |
| fi |
| echo -e "$INDENT$*" |
| else |
| echo -e "\r$INDENT$*$CNORM" |
| fi |
| } |
| |
| if [ "$1" == "get" ] && [ "$2" == "voltconfig" ]; then |
| echo "$HOME/.volt/config-$NAME" |
| exit |
| fi |
| |
| if [ $# -ne 1 ] || ! is_in "$1" "up,down,dump,clean"; then |
| >&2 echo "What wouild you like to do today:" |
| >&2 echo " up - bring up voltha" |
| >&2 echo " down - tear down voltha" |
| >&2 echo " dump - create a debug dump of running system" |
| exit 1 |
| fi |
| |
| do_curl() { |
| local DATA_ARGS CREDS CMD_ECHO CMD_OUTPUT SC_OUTPUT WAIT_START INDENTA EXTRAA NOW |
| local INDENT=$1 |
| local OP=$2 |
| local USER=$3 |
| local PASS=$4 |
| local URL=$5 |
| local DATA_TYPE=$6 |
| local DATA=$7 |
| local MSG=$8 |
| local VALID_RESULTS=$9 |
| local EXTRA=${10} |
| local ICON=${11} |
| |
| # Turn into an array for passing |
| INDENTA=() |
| if [ -n "$INDENT" ]; then |
| INDENTA=("$INDENT") |
| fi |
| IFS=' ' read -r -a EXTRAA <<< "$EXTRA" |
| |
| # Thanks to the latest version of ONOS using the return code 207 this gets a |
| # whole lot nastier. Can't thank them enough for doing this. So in order to |
| # capture the command and the output in the log file as well as capture the |
| # status code to verify it is 200 and not 207 mutltiple files and a bit of |
| # hackery must be used. Thanks again ONOS. |
| CMD_ECHO="$(mktemp -u)" |
| CMD_OUTPUT="$(mktemp -u)" |
| SC_OUTPUT="$(mktemp -u)" |
| WAIT_START="$(date +%s)" |
| |
| CREDS=() |
| if [ -n "$USER" ]; then |
| CREDS=("--user" "$USER:$PASS") |
| fi |
| |
| DATA_ARGS=() |
| if [ -n "$DATA" ]; then |
| if [ "$DATA_TYPE" == "file" ]; then |
| DATA_ARGS=("--data" "@$DATA") |
| elif [ "$DATA_TYPE" == "json" ]; then |
| DATA_ARGS=("--data" "$DATA") |
| fi |
| fi |
| |
| bspin "${INDENTA[@]}" "$MSG" "$ICON" |
| while true; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin "${INDENTA[@]}" "$THEX" |
| rm -f "$CMD_ECHO" "$CMD_OUTPUT" "$SC_OUTPUT" |
| doTimeout "$MSG" |
| fi |
| (set -x; curl -sSL "${CREDS[@]}" -w "%{http_code}" -o "$CMD_OUTPUT" -X "$OP" "${EXTRAA[@]}" "$URL" "${DATA_ARGS[@]}" >"$SC_OUTPUT" 2>/dev/null) >>"$CMD_ECHO" 2>&1 |
| RESULT=$? |
| # Dump everything to the log |
| cat "$CMD_ECHO" >> "$LOG" |
| test -r "$CMD_OUTPUT" && cat "$CMD_OUTPUT" >> "$LOG" |
| SC="$(cat "$SC_OUTPUT")" |
| echo "RESPONSE CODE: $SC" >> "$LOG" |
| echo "ERROR CODE: $RESULT" >> "$LOG" |
| |
| # clean up temp files |
| rm -f "$CMD_ECHO" "$CMD_OUTPUT" "$SC_OUTPUT" |
| if [ "$RESULT" -eq 0 ] && is_in "$SC" "$VALID_RESULTS"; then |
| break |
| fi |
| sleep 1 |
| sspin "${INDENTA[@]}" |
| done |
| espin "${INDENTA[@]}" "$VERIFIED" |
| } |
| |
| push_onos_config() { |
| local DATA_TYPE=$1 |
| local MSG=$2 |
| local RESOURCE=$3 |
| local DATA=$4 |
| |
| do_curl "-" "POST" "karaf" "karaf" "http://$_ONOS_API_EP/onos/v1/$RESOURCE" "$DATA_TYPE" "$DATA" "$MSG" "200" "--fail -H Content-Type:application/json" "$GEAR" |
| } |
| |
| check_onos_app_active() { |
| local APP_ID WAIT_START RESULT NOW |
| APP_ID=$1 |
| WAIT_START="$(date +%s)" |
| |
| bspin - "Checking that $APP_ID is active $CLOCK" |
| while true; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin - "$THEX" |
| doTimeout "waiting for ONOS application activation '$APP_ID'" |
| fi |
| if (set -x; curl --fail -sSL --user karaf:karaf -X GET "http://$_ONOS_API_EP/onos/v1/applications/$APP_ID" | grep ACTIVE >>"$LOG" 2>&1) >>"$LOG" 2>&1; then |
| break |
| fi |
| sleep 1 |
| sspin - |
| done |
| sleep 5 # OSGI components take a little longer that the app to activate |
| espin - "$VERIFIED" |
| } |
| |
| override_onos_app() { |
| local APP NAME WAIT_START NOW |
| APP=$1 |
| NAME="$(basename "$APP" | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g')" |
| WAIT_START="$(date +%s)" |
| |
| while true; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin - "$THEX" |
| doTimeout "waiting to overwrite ONOS application '$APP'" |
| fi |
| sspin - |
| # Attempt to delete old version (if it exists) |
| (set -x; curl --fail -sSL --user karaf:karaf -X DELETE "http://$_ONOS_API_EP/onos/v1/applications/$NAME" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| RESULT=$? |
| sspin - |
| if [ $RESULT -ne 0 ]; then |
| continue |
| fi |
| if (set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream "http://$_ONOS_API_EP/onos/v1/applications?activate=true" --data-binary "@$APP" >>"$LOG" 2>&1) >>"$LOG" 2>&1; then |
| break |
| fi |
| sleep .2 |
| done |
| } |
| |
| activate_onos_app() { |
| local MSG APP WAIT_START NOW |
| MSG="$1" |
| APP=$2 |
| WAIT_START="$(date +%s)" |
| |
| bspin - "$MSG $GO" |
| while true; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin - "$THEX" |
| doTimeout "waiting to activate ONOS application '$APP'" |
| fi |
| sspin - |
| if (set -x; curl --fail -sSL --user karaf:karaf -X POST "http://$_ONOS_API_EP/onos/v1/applications/$APP/active" >>"$LOG" 2>&1) >>"$LOG" 2>&1; then |
| break |
| fi |
| sleep .2 |
| done |
| espin - "$VERIFIED" |
| } |
| |
| count_pods() { |
| local NAMESPACE STATES LABELS CMD PODS |
| NAMESPACE=$1; shift |
| if [ "$NAMESPACE" == "all-namespaces" ]; then |
| NAMESPACE="--all-namespaces" |
| else |
| NAMESPACE="-n $NAMESPACE" |
| fi |
| STATES=$1; shift |
| LABELS=$1; shift |
| CMD=("kubectl get $NAMESPACE $LABELS pod") |
| PODS=$(${CMD[*]} -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}") |
| local COUNT=0 |
| local PATTERNS="$*" |
| for POD in $PODS; do |
| local NAME STATE CONTAINERS TOTAL FOUND |
| NAME="$(echo "$POD" | cut -d/ -f 1)" |
| STATE="$(echo "$POD" | cut -d/ -f 2)" |
| CONTAINERS="$(echo "$POD" | cut -d/ -f 3 | sed -e 's/_/ /g')" |
| if [ "$STATES" == "*" ] || [ "$(echo "$STATES" | grep -c ":$STATE:")" -ne 0 ]; then |
| TOTAL="$(echo "$CONTAINERS" | wc -w)" |
| FOUND="$(echo "$CONTAINERS" | grep -o true | wc -l)" |
| if [ "$TOTAL" -eq "$FOUND" ]; then |
| for PATTERN in $PATTERNS; do |
| if [[ "$NAME" =~ $PATTERN ]]; then |
| COUNT="$((COUNT + 1))" |
| break |
| fi |
| done |
| fi |
| fi |
| done |
| echo $COUNT |
| } |
| |
| wait_for_pods() { |
| local INDENT NAMESPACE EXPECT TYPE MESSAGE LABELS PATTERNS STATES HAVE ALL WAIT_START NOW |
| if [ "$1" == "-" ]; then |
| INDENT=$1; shift |
| fi |
| NAMESPACE=$1; shift |
| EXPECT=$1; shift |
| TYPE=$1; shift |
| MESSAGE=$1; shift |
| LABELS=$1; shift |
| PATTERNS=("$*") |
| STATES=":Running:" |
| if [ "$TYPE" == "not" ]; then |
| STATES="*" |
| fi |
| HAVE="$(count_pods "$NAMESPACE" "$STATES" "$LABELS" "${PATTERNS[@]}")" |
| ALL=$HAVE |
| if [ "$TYPE" == "only" ]; then |
| ALL="$(count_pods "all-namespaces" "*" ".*")" |
| fi |
| COUNT="$((300 / 15))" |
| WAIT_START="$(date +%s)" |
| bspin "$INDENT" "$MESSAGE" |
| sspin "$INDENT" |
| if [ "$HAVE" -ne "$EXPECT" ] || [ "$ALL" -ne "$HAVE" ]; then |
| while [ "$HAVE" -ne "$EXPECT" ] || [ "$ALL" -ne "$HAVE" ]; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin "$INDENT" "$THEX" |
| doTimeout "waiting for PODs to start" |
| fi |
| sspin "$INDENT" |
| COUNT="$((COUNT - 1))" |
| if [ "$COUNT" -eq 0 ]; then |
| HAVE="$(count_pods "$NAMESPACE" "$STATES" "$LABELS" "${PATTERNS[@]}")" |
| ALL="$HAVE" |
| if [ "$TYPE" == "only" ]; then |
| ALL="$(count_pods "all-namespaces" "*" ".*")" |
| fi |
| COUNT="$((300 / 15))" |
| fi |
| sleep .15 |
| done |
| fi |
| espin "$INDENT" "$VERIFIED" |
| if [ "$HAVE" -ne "$EXPECT" ]; then |
| return 1 |
| fi |
| return 0 |
| } |
| |
| port_forward() { |
| local NS=$1; shift |
| local SVC=$1; shift |
| local PORTS="$*" |
| local TAG=$SVC-$NAME |
| |
| (set -x; _TAG="$TAG" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n $NS service/$SVC $PORTS; done" >>"$PFLOG" 2>&1 &) >>"$PFLOG" 2>&1 |
| } |
| |
| kill_port_forward() { |
| local TAG P_IDS PARENTS KIDS UNKNOWN PP_ID PF |
| |
| while [ $# -gt 0 ]; do |
| PF=$1; shift |
| TAG= |
| if [ "$PF" != "__ALL__" ]; then |
| TAG="$PF-$NAME" |
| fi |
| PARENTS= |
| KIDS= |
| UNKNOWN= |
| # shellcheck disable=SC2009 |
| P_IDS="$(ps e -ww -A | grep "_TAG=$TAG" | grep -v grep | awk '{print $1}')" |
| if [ -n "$P_IDS" ]; then |
| for P_ID in $P_IDS; do |
| PP_ID="$(ps -o ppid "$P_ID" | tail -n +2)" |
| if [ -n "$PP_ID" ]; then |
| if [ "$PP_ID" -eq 1 ]; then |
| PARENTS="$PARENTS $P_ID" |
| else |
| KIDS="$KIDS $P_ID" |
| fi |
| else |
| UNKNOWN="$UNKNOWN $P_ID" |
| fi |
| done |
| if [ -n "$PARENTS" ]; then |
| # shellcheck disable=SC2086 |
| while ps -h $PARENTS >/dev/null 2>&1; do |
| (set -x; eval "kill -9 $PARENTS" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| done |
| fi |
| if [ -n "$KIDS" ]; then |
| # shellcheck disable=SC2086 |
| while ps -h $KIDS >/dev/null 2>&1; do |
| (set -x; eval "kill -9 $KIDS" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| done |
| fi |
| if [ -n "$UNKNOWN" ]; then |
| # shellcheck disable=SC2086 |
| while ps -h $UNKNOWN >/dev/null 2>&1; do |
| (set -x; eval "kill -9 $UNKNOWN" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| done |
| fi |
| fi |
| done |
| } |
| |
| resolve_chart_version() { |
| [ "$2" != "latest" ] && echo "$2" && return |
| helm inspect chart "$1" | grep "^version:" | awk '{print $2}' |
| } |
| |
| # Compares two semver-formatted version strings (e.g. 2.4.3) |
| # Returns 0 if $1 == $2, returns 1 if $1 > $2 and returns 2 if $1 < $2 |
| compare_versions() { |
| [ "$1" == "$2" ] && return 0 |
| local lowest |
| lowest=$(echo -e "$1\n$2" | sort -V | head -1) |
| [ "$lowest" == "$1" ] && return 2 |
| return 1 |
| } |
| |
| if [ "$1" == "down" ]; then |
| echo "Tearing down voltha cluster $NAME" |
| LOG="down-$NAME.log" |
| date -u +"%Y%m%dT%H%M%SZ" >"$LOG" |
| if is_in "$WITH_ONOS" "yes,legacy,classic"; then |
| bspin "Remove port-forwards: onos-ui-$NAME" |
| kill_port_forward onos-ui |
| sspin "Remove port-forwards: onos-ssh-$NAME$CEOL" |
| kill_port_forward onos-ssh |
| bspin "Remove port-forwards: onos-onos-classic-hs-$NAME$CEOL" |
| kill_port_forward onos-onos-classic-hs |
| fi |
| sspin "Remove port-forwards: voltha-api-$NAME$CEOL" |
| kill_port_forward voltha-api voltha-voltha-api |
| if is_in "$WITH_ETCD" "yes,external"; then |
| sspin "Remove port-forwards: etcd-$NAME$CEOL" |
| kill_port_forward "etcd" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| sspin "Remove port-forwards: kafka-$NAME$CEOL" |
| kill_port_forward "kafka" |
| fi |
| |
| if [ "$WITH_PPROF" == "yes" ]; then |
| sspin "Remove port-forwards: *-profiler$CEOL" |
| kill_port_forward voltha-rw-core-profiler voltha-voltha-rw-core-profiler |
| kill_port_forward voltha-of-agent-profiler voltha-voltha-of-agent-profiler |
| if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then |
| kill_port_forward adapter-open-olt-profiler open-olt-adapter-open-olt-profiler |
| fi |
| fi |
| |
| espin "$VERIFIED Remove port-forwards$CEOL" |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| if [ -x ./bin/kind ]; then |
| bspin "Delete Kubernetes Kind Cluster" |
| (set -x; ./bin/kind delete cluster --name "voltha-$NAME" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin "$VERIFIED" |
| else |
| espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found" |
| fi |
| else |
| if [ "$CONFIG_SADIS" == "external" ]; then |
| bspin "Remove configmap for BBSIM SADIS server" |
| (set -x; kubectl -n "$BBSIM_NS" delete --ignore-not-found configmap kube-config >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin "$VERIFIED" |
| fi |
| EXISTS="$(helm list -q)" |
| EXPECT="voltha" |
| if is_in "$WITH_ONOS" "yes,legacy,classic"; then |
| EXPECT+=" onos" |
| fi |
| if [ "$WITH_RADIUS" == "yes" ]; then |
| EXPECT+=" radius" |
| fi |
| if [ "$CONFIG_SADIS" == "external" ]; then |
| EXPECT+=" bbsim-sadis-server" |
| fi |
| if [ "$WITH_BBSIM" == "yes" ]; then |
| EXPECT+=" bbsim" |
| fi |
| if [ "$WITH_EFK" == "yes" ]; then |
| EXPECT+=" elasticsearch kibana fluentd" |
| fi |
| if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then |
| EXPECT+=" open-olt open-onu" |
| fi |
| if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then |
| EXPECT+=" sim" |
| fi |
| if is_in "$WITH_ETCD" "yes,external"; then |
| EXPECT+=" etcd" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| EXPECT+=" kafka" |
| fi |
| bspin "Remove Helm Deployments" |
| for i in $EXISTS; do |
| for j in $EXPECT; do |
| if [[ "$i" =~ $j ]]; then |
| sspin "Remove Helm Deployments: $i$CEOL" |
| (set -x; ./bin/helm delete --no-hooks --purge "$i" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| fi |
| done |
| done |
| espin "$VERIFIED Remove Helm Deployments$CEOL" |
| if [ "$WAIT_ON_DOWN" == "yes" ]; then |
| PODS="voltha-ofagent.* voltha-rw-core.*" |
| INFRA_PODS= |
| ADAPT_PODS= |
| SIM_PODS= |
| EFK_PODS= |
| if [ "$WITH_RADIUS" == "yes" ]; then |
| PODS+=" radius.*" |
| fi |
| if [ "$WITH_BBSIM" == "yes" ]; then |
| SIM_PODS+=" bbsim.*" |
| fi |
| if [ "$WITH_EFK" == "yes" ]; then |
| EFK_PODS+=" kibana-* elasticsearch-* fluentd-*" |
| fi |
| if [ "$WITH_OPEN_ADAPTERS" ] || [ "$WITH_SIM_ADAPTERS" ]; then |
| ADAPT_PODS+=" adapter-*" |
| fi |
| if is_in "$WITH_ONOS" "yes,legacy,classic"; then |
| INFRA_PODS+=" onos-.*" |
| fi |
| if is_in "$WITH_ETCD" "yes,external"; then |
| INFRA_PODS+=" etcd.*" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| INFRA_PODS+=" kafka.*" |
| fi |
| if [ -n "$SIM_PODS" ]; then |
| wait_for_pods "$BBSIM_NS" 0 "not" "Waiting for BBSIM PODs to terminate" "$BBSIM_LABEL" "$SIM_PODS" |
| fi |
| if [ -n "$INFRA_PODS" ]; then |
| wait_for_pods "$INFRA_NS" 0 "not" "Waiting for infrastructure PODs to terminate" "$NO_LABEL" "$INFRA_PODS" |
| fi |
| if [ -n "$ADAPT_PODS" ]; then |
| wait_for_pods "$ADAPTER_NS" 0 "not" "Waiting for adapter PODs to terminate" "$NO_LABEL" "$ADAPT_PODS" |
| fi |
| if [ -n "$EFK_PODS" ]; then |
| wait_for_pods "$INFRA_NS" 0 "not" "Waiting for EFK PODs to terminate" "$NO_LABEL" "$EFK_PODS" |
| fi |
| wait_for_pods "$VOLTHA_NS" 0 "not" "Waiting for VOLTHA PODs to terminate" "$NO_LABEL" "$PODS" |
| fi |
| fi |
| exit |
| fi |
| |
| if [ "$1" == "dump" ]; then |
| LOG="dump-$NAME.log" |
| TS="$(date -u +"%Y%m%dT%H%M%SZ")" |
| if [ -n "$DUMP_FROM" ]; then |
| TS=${DUMP_FROM//[:-]} |
| fi |
| WORK="$(mktemp -u -d)" |
| DATA=$WORK/voltha-debug-dump-$NAME-$TS |
| mkdir -p "$DATA" |
| echo "$TS" > "$LOG" |
| echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz" |
| bspin - "Copy install log" |
| if [ -f "install-$NAME.log" ]; then |
| (set -x; cp "install-$NAME.log" "$DATA/install-$NAME.log") >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| else |
| espin - "$NO_ENTRY Copy install log: install-$NAME.log not found" |
| fi |
| bspin - "Dumping Kubernetes PODs" |
| (set -x; kubectl get --all-namespaces pods >> "$DATA/all-pods.txt" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Dumping Kubernetes SERVICEs" |
| (set -x; kubectl get --all-namespaces svc >> "$DATA/all-services.txt" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Dumping Kubernetes EVENTs" |
| (set -x; kubectl get --all-namespaces events >> "$DATA/all-events.txt" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Dumping VOLTHA POD details" |
| PODS="$(kubectl -n "$INFRA_NS" get pod -o name | grep onos | sed -e "s/^/$INFRA_NS:/g") $(kubectl get -n "$VOLTHA_NS" pod -o name | sed -e "s/^/$VOLTHA_NS:/g")" |
| SINCE= |
| if [ -n "$DUMP_FROM" ]; then |
| SINCE="--since-time=$DUMP_FROM" |
| fi |
| for POD in $PODS; do |
| NS="$(echo "$POD" | cut -d: -f1)" |
| POD="$(echo "$POD" | cut -d: -f2)" |
| sspin - "Dumping VOLTHA POD details: $POD$CEOL" |
| mkdir -p "$DATA/$POD" |
| (set -x; kubectl describe -n "$NS" "$POD" >> "$DATA/$POD/describe.txt" 2>&1) >>"$LOG" 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| (set -x; kubectl logs -n "$NS" --all-containers "$SINCE" --previous "$LOG_ARGS" "$POD" >> "$DATA/$POD/logs-previous.txt" 2>&1) >>"$LOG" 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| (set -x; kubectl logs -n "$NS" --all-containers "$SINCE" "$LOG_ARGS" "$POD" >> "$DATA/$POD/logs-current.txt" 2>&1) >>"$LOG" 2>&1 |
| sspin - "Dumping VOLTHA POD details: $POD" |
| done |
| espin - "$VERIFIED Dumping VOLTHA POD details$CEOL" |
| bspin - "Dumping ETCD" |
| if [ -n "$(command -v etcdctl)" ]; then |
| (set -x; ETCDCTL_API=3 etcdctl --endpoints "localhost:$VOLTHA_ETCD_PORT" get --prefix service/voltha | hexdump -C >> "$DATA/etcd.hex" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| else |
| espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available" |
| fi |
| bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz" |
| (set -x; tar -C "$WORK" -zcf "voltha-debug-dump-$NAME-$TS.tgz" "./voltha-debug-dump-$NAME-$TS") >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Cleanup" |
| (set -x; rm -rf "$WORK") >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "$(ls -l "voltha-debug-dump-$NAME-$TS.tgz")" |
| espin - "$VERIFIED" |
| exit |
| fi |
| |
| LOG="install-$NAME.log" |
| PFLOG="port-forward-$NAME.log" |
| date > "$LOG" |
| echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT,$ELASTICSEARCH_PORT,$KIBANA_PORT" >> "$LOG" |
| |
| # Output install options to log |
| echo "OPTIONS" >> "$LOG" |
| for O in $ALL_OPTIONS; do |
| VAL="$(eval echo "\$$O")" |
| if [ -n "$VAL" ]; then |
| printf " %-30s = %s\n" "$O" "$VAL" >> "$LOG" |
| fi |
| done |
| |
| # Force remove any existing k8s port-forward processes. This will |
| # remove them for all kind clusters. |
| if [ "$1" == "clean" ]; then |
| kill_port_forward __ALL__ |
| exit |
| fi |
| |
| helm_values() { |
| local NAMESPACE=$1; shift |
| local INAME=$1; shift |
| local CHART=$1; shift |
| local CHART_VERSION=$1; shift |
| |
| if [ "$CHART_VERSION X" != " X" ] && [ "$CHART_VERSION" != "latest" ]; then |
| CHART_VERSION="--version $CHART_VERSION" |
| else |
| CHART_VERSION= |
| fi |
| |
| local CHART_ARGS= |
| if [ -r "${INAME}-values.yaml" ]; then |
| CHART_ARGS="-f ${INAME}-values.yaml" |
| fi |
| |
| if [ "$HELM_USE_UPGRADE" == "yes" ]; then |
| _HELM_COMMAND="upgrade --install" |
| _HELM_ARGS="xxxdryrunxxx" |
| else |
| _HELM_COMMAND="install" |
| _HELM_ARGS="--name xxxdryrunxxx" |
| fi |
| CMD=("helm $_HELM_COMMAND --debug --dry-run -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE $_HELM_ARGS $CHART_VERSION $EXTRA_HELM_FLAGS $CHART") |
| ${CMD[*]} 2>/dev/null | awk 'PRINT==1 {print}; /^USER-SUPPLIED VALUES:/ {PRINT = 1}; /^$/ {PRINT = 0}' |
| } |
| |
| helm_install() { |
| local INDENT NOW VALUES_FILE PPROF_ARG |
| if [ "$1" == "-" ]; then |
| INDENT=$1; shift |
| fi |
| local NAMESPACE=$1; shift |
| local INAME=$1; shift |
| local CHART=$1; shift |
| local CHART_VERSION=$1; shift |
| local FILTER=$1; shift |
| local MESSAGE=$* |
| |
| if [ "$CHART_VERSION X" != " X" ] && [ "$CHART_VERSION" != "latest" ]; then |
| CHART_VERSION="--version $CHART_VERSION" |
| else |
| CHART_VERSION= |
| fi |
| |
| local CHART_ARGS= |
| if [ -r "${INAME}-values.yaml" ]; then |
| CHART_ARGS="-f ${INAME}-values.yaml" |
| fi |
| |
| local WAIT_START CMD |
| WAIT_START="$(date +%s)" |
| COUNT="$((300 / 15))" |
| bspin "$INDENT" "$MESSAGE" |
| if [ "$HELM_USE_UPGRADE" == "yes" ]; then |
| _HELM_COMMAND="upgrade --install" |
| _HELM_ARGS="$INAME" |
| else |
| _HELM_COMMAND="install" |
| _HELM_ARGS="--name $INAME" |
| fi |
| |
| VALUES_FILE="$(mktemp)" |
| if [ "$FILTER" == "-" ]; then |
| cp "$NAME-values.yaml" "$VALUES_FILE" |
| elif [ "${FILTER:0:1}" == "+" ]; then |
| cp "$NAME-values.yaml" "$VALUES_FILE" |
| yq r - "${FILTER:1}" <"$NAME-values.yaml" >>"$VALUES_FILE" |
| cat "$VALUES_FILE" >>"$LOG" |
| else |
| yq r - "$FILTER" <"$NAME-values.yaml" >"$VALUES_FILE" |
| fi |
| if [ "$WITH_PPROF" == "yes" ]; then |
| PPROF_ARG="--set profiler.enabled=true" |
| fi |
| CMD=("helm $_HELM_COMMAND -f $VALUES_FILE $CHART_ARGS $PPROF_ARG $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE $_HELM_ARGS $CHART_VERSION $EXTRA_HELM_FLAGS $CHART") |
| (set -x; ${CMD[*]} >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| SUCCESS=$? |
| while [ "$SUCCESS" -ne 0 ]; do |
| NOW="$(date +%s)" |
| if [ "$((NOW - WAIT_START))" -gt "$TIMEOUT_SECONDS" ]; then |
| espin "$THEX" |
| rm -f "$VALUES_FILE" |
| doTimeout "waiting for helm install $CHART" |
| fi |
| sspin "$INDENT" |
| COUNT="$((COUNT - 1))" |
| if [ "$COUNT" -eq 0 ]; then |
| if [ "$HELM_USE_UPGRADE" == "no" ]; then |
| (set -x; helm delete --purge "$INAME" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| fi |
| (set -x; ${CMD[*]} >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| SUCCESS=$? |
| COUNT="$((300 / 15))" |
| fi |
| sleep .15 |
| done |
| rm -f "$VALUES_FILE" |
| espin "$INDENT" "$VERIFIED" |
| } |
| |
| echo "INSTALL TYPE: $TYPE" >> "$LOG" |
| |
| bspin "Verify GOPATH" |
| GOPATH="$(pwd)"; export GOPATH |
| mkdir -p "$GOPATH/bin" |
| espin "$VERIFIED" |
| |
| STIME="$(date +%s)" |
| if [ "$INSTALL_KUBECTL" == "no" ]; then |
| bspin "Skip kubectl install" |
| espin $NO_ENTRY |
| else |
| bspin "Verify kubectl $HELM" |
| if [ -x "$GOPATH/bin/kubectl" ]; then |
| espin "$VERIFIED" |
| else |
| ERR_OUT="$(mktemp)" |
| espin "$NOT_VERIFIED" |
| bspin - "Download and install Kubernetes/kubectl $DOWNLOAD" |
| (set -x; curl --fail -o "$GOPATH/bin/kubectl" -sSL "https://storage.googleapis.com/kubernetes-release/release/$(curl --fail -sSL https://storage.googleapis.com/kubernetes-release/release/stable.txt 2>>"$ERR_OUT")/bin/$HOSTOS/$HOSTARCH/kubectl" >>"$LOG" 2>>"$ERR_OUT") >>"$LOG" 2>&1 |
| RESULT=$? |
| if [ "$RESULT" -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to download kubectl: $(tail "$ERR_OUT")${NORMAL}" |
| cat "$ERR_OUT" >> "$LOG" |
| rm -rf "$ERR_OUT" "$GOPATH/bin/kubectl" |
| exit 1 |
| fi |
| (set -x; chmod 755 "$GOPATH/bin/kubectl" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| rm -rf "$ERR_OUT" |
| fi |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| STIME="$(date +%s)" |
| if [ "$DEPLOY_K8S" == "no" ]; then |
| bspin "Skip Kubernetes/Kind Deployment" |
| espin $NO_ENTRY |
| else |
| bspin "Verify Kubernetes/Kind $HELM" |
| IS_INSTALLED=0 |
| OP_TYPE="install" |
| if [ -x "$GOPATH/bin/kind" ]; then |
| OP_TYPE="upgrade" |
| if [ "$("$GOPATH/bin/kind" --version | grep -c "$KIND_VERSION")" -eq 1 ]; then |
| IS_INSTALLED=1 |
| espin "$VERIFIED" |
| fi |
| fi |
| if [ "$IS_INSTALLED" -eq 0 ]; then |
| ERR_OUT="$(mktemp)" |
| espin "$NOT_VERIFIED" |
| bspin - "Download and $OP_TYPE Kubernetes/kind $DOWNLOAD" |
| (set -x; curl -o "$GOPATH/bin/kind" --fail -sSL "https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH" >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1 |
| RESULT=$? |
| if [ $RESULT -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to download kind: $(tail "$ERR_OUT")${NORMAL}" |
| cat "$ERR_OUT" >> "$LOG" |
| rm -rf "$ERR_OUT" "$GOPATH/bin/kind" |
| exit 1 |
| fi |
| (set -x; chmod 755 "$GOPATH/bin/kind" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| rm -rf "$ERR_OUT" |
| espin - "$VERIFIED" |
| fi |
| fi |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| STIME="$(date +%s)" |
| if [ "$INSTALL_HELM" == "no" ]; then |
| bspin "Skip Helm Install" |
| espin $NO_ENTRY |
| else |
| bspin "Verify Helm $HELM" |
| HELM_UPGRADE=0 |
| HELM_UPGRADE_DESC="install" |
| if [ -x "$GOPATH/bin/helm" ]; then |
| HAVE_VER="$("$GOPATH/bin/helm" version -c --template '{{.Client.SemVer}}')" |
| HELM_UP_DOWN="$(echo -e "$HAVE_VER\n$HELM_VERSION" | sort -V | head -1)" |
| if [ "$HAVE_VER" != "$HELM_VERSION" ]; then |
| if [ "$HELM_UP_DOWN" == "$HELM_VERSION" ]; then |
| HELM_UPGRADE_DESC="downgrade" |
| else |
| HELM_UPGRADE_DESC="upgrade" |
| fi |
| HELM_UPGRADE=1 |
| else |
| espin "$VERIFIED" |
| fi |
| else |
| HELM_UPGRADE=1 |
| fi |
| |
| if [ "$HELM_UPGRADE" -ne 0 ]; then |
| ERR_OUT="$(mktemp)" |
| INSTALL_HELM_BIN=$(mktemp) |
| espin "$NOT_VERIFIED" |
| bspin - "Download and $HELM_UPGRADE_DESC Helm $DOWNLOAD" |
| (set -x; curl -o "$INSTALL_HELM_BIN" --fail -sSL https://git.io/get_helm.sh >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1 |
| RESULT=$? |
| if [ $RESULT -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to download helm installer: $(tail "$ERR_OUT")${NORMAL}" |
| cat "$ERR_OUT" >> "$LOG" |
| rm -rf "$INSTALL_HELM_BIN" "$ERR_OUT" "$GOPATH/bin/helm" "$GOPATH/bin/tiller" |
| exit 1 |
| fi |
| rm -rf "$ERR_OUT" |
| chmod +x "$INSTALL_HELM_BIN" |
| (set -x; PATH="$GOPATH/bin:$PATH" DESIRED_VERSION=$HELM_VERSION USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin "$INSTALL_HELM_BIN" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| RESULT=$? |
| if [ $RESULT -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to install helm, see install log for details${NORMAL}" |
| rm -rf "$INSTALL_HELM_BIN" "$ERR_OUT" "$GOPATH/bin/helm" "$GOPATH/bin/tiller" |
| exit 1 |
| fi |
| rm -rf "$INSTALL_HELM_BIN" "$ERR_OUT" |
| espin - "$VERIFIED" |
| fi |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| STIME="$(date +%s)" |
| bspin "Verify voltctl $HIGH_VOLTAGE" |
| VOK=0 |
| VMESSAGE="install" |
| ERR_OUT=$(mktemp) |
| export VC_VERSION="$VOLTCTL_VERSION" |
| if [ "$VC_VERSION" == "latest" ]; then |
| set -o pipefail # TODO: would be nice to run all in pipefail mode |
| VC_VERSION="$(curl --fail -sSL https://api.github.com/repos/opencord/voltctl/releases/latest 2>"$ERR_OUT" | jq -r .tag_name | sed -e 's/^v//g')" |
| RESULT=$? |
| set +o pipefail |
| if [ "$RESULT" -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to determine released version of voltctl: $(cat "$ERR_OUT")${NORMAL}" |
| rm -rf "$ERR_OUT" "$GOPATH/bin/voltctl" |
| exit 1 |
| fi |
| export VC_VERSION |
| fi |
| |
| if [ -x "$GOPATH/bin/voltctl" ]; then |
| VHAVE="$("$GOPATH/bin/voltctl" version --clientonly -o json 2>/dev/null | jq -r .version)" |
| RESULT=$? |
| if [ $RESULT -eq 0 ] && [ "$VHAVE" == "$VC_VERSION" ]; then |
| VOK=1 |
| espin "$VERIFIED" |
| else |
| VCHECK="$(echo -e "$VHAVE\n$VC_VERSION" | sort -V | head -1)" |
| if [ "$VCHECK" == "$VHAVE" ]; then |
| VMESSAGE="upgrade" |
| else |
| VMESSAGE="downgrade" |
| fi |
| fi |
| fi |
| |
| if [ "$VOK" -eq 0 ]; then |
| espin "$NOT_VERIFIED" |
| bspin - "Download and $VMESSAGE voltctl $DOWNLOAD" |
| (set -x; curl --fail -o "$GOPATH/bin/voltctl" -sSL "https://github.com/opencord/voltctl/releases/download/v$VC_VERSION/voltctl-$VC_VERSION-$HOSTOS-$HOSTARCH" >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1 |
| RESULT=$? |
| if [ $RESULT -ne 0 ]; then |
| espin - "$THEX" |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR: unable to download voltctl (version $VC_VERSION): $(cat "$ERR_OUT")${NORMAL}" |
| rm -rf "$ERR_OUT" "$GOPATH/bin/voltctl" |
| exit 1 |
| fi |
| (set -x; chmod 755 "$GOPATH/bin/voltctl" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| fi |
| rm -rf "$ERR_OUT" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| bspin "Verify command PATH" |
| export PATH=$GOPATH/bin:$PATH |
| espin "$VERIFIED" |
| |
| STIME="$(date +%s)" |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| HAVE="$(kind get clusters | grep -c "voltha-$NAME")" |
| bspin "Verify Kubernetes/Kind Cluster" |
| sspin |
| if [ "$HAVE" -eq 0 ]; then |
| espin "$NOT_VERIFIED" |
| bspin - "Verify cluster configuration" |
| if [ ! -r "./$NAME-cluster.cfg" ]; then |
| espin - "$NOT_VERIFIED" |
| bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD" |
| ERR_OUT="$(mktemp)" |
| if ! (set -x; curl --fail -o "./$NAME-cluster.cfg" -sSL "https://raw.githubusercontent.com/opencord/kind-voltha/$VK_RELEASE/$TYPE-cluster.cfg" >>"$LOG" 2>>"$ERR_OUT") >>"$LOG" 2>&1; then |
| espin - "$THEX" |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-cluster.cfg${NORMAL}${RED} - $(cat "$ERR_OUT")${NORMAL}" |
| echo "ERROR: $(cat "$ERR_OUT")" >>"$LOG" |
| rm -rf "$ERR_OUT" "./$NAME-cluster.cfg" |
| exit 1 |
| fi |
| rm -rf "$ERR_OUT" |
| else |
| espin - "$VERIFIED" |
| fi |
| kind create cluster --name "voltha-$NAME" --config "$NAME-cluster.cfg" |
| else |
| espin "$VERIFIED" |
| fi |
| |
| export KUBECONFIG="./kube-config-$NAME" |
| kind get kubeconfig --name="voltha-$NAME" >"$KUBECONFIG" |
| # For backward compatibility also copy to old location |
| mkdir -p "$HOME/.kube" |
| cp "$KUBECONFIG" "$HOME/.kube/kind-config-voltha-$NAME" |
| |
| P="coredns-.* \ |
| etcd-voltha-$NAME-control-plane \ |
| kindnet-.* \ |
| kube-apiserver-voltha-$NAME-control-plane \ |
| kube-controller-manager-voltha-$NAME-control-plane \ |
| kube-proxy-.* \ |
| kube-scheduler-voltha-$NAME-control-plane" |
| |
| EXPECT="$(test "$TYPE" == "minimal" && echo "12" || echo "14")" |
| wait_for_pods - "kube-system" "$EXPECT" "includes" "Waiting for system PODs to start" "$NO_LABEL" "$P" |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| if [ "$SCHEDULE_ON_CONTROL_NODES" == "yes" ]; then |
| bspin "Untaint control nodes to allow scheduling $LOCK" |
| for MNODE in $(kubectl get node --selector='node-role.kubernetes.io/master' -o json | jq -r '.items[].metadata.name'); do |
| (set -x; kubectl taint node "$MNODE" node-role.kubernetes.io/master:NoSchedule- >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| sspin |
| done |
| espin "$VERIFIED" |
| fi |
| |
| STIME="$(date +%s)" |
| COUNT="$(count_pods "kube-system" ":Running:" "$NO_LABEL" "tiller-deploy-.*")" |
| bspin "Verify Helm" |
| if [ "$COUNT" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| echo -e "Configuring Helm $GEAR" |
| if [ "$INSTALL_HELM" == "no" ]; then |
| bspin - "Skip Helm/Tiller Initialization" |
| espin - $NO_ENTRY |
| else |
| bspin - "Initialize Helm" |
| (set -x; helm init --upgrade >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| wait_for_pods - "kube-system" 1 "includes" "Waiting for Tiller POD to start" "$NO_LABEL" "tiller-deploy-.*" |
| fi |
| |
| # HACK (sort-of) - the config for tiller is about to be patched, which will |
| # cause the tiller pod to be recreated. This can sometimes cause a timing |
| # issue with the "wait_for_pods" call on tiller as it may incorrectly |
| # identify the running/ready tiller pod that is soon to be terminated as |
| # what it is waiting for. To avoid this issue we do a clean scale down and |
| # scale up of the pod so the script controlls when it should be expecting |
| # things |
| (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| wait_for_pods - "kube-system" 0 "not" "Waiting for Tiller POD to shutdown" "$NO_LABEL" "tiller-deploy-.*" |
| |
| # Create and k8s service account so that Helm can create pods |
| bspin - "Create Tiller ServiceAccount" |
| (set -x; kubectl create serviceaccount --namespace kube-system tiller >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Create Tiller ClusterRoleBinding" |
| (set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Update Tiller Manifest" |
| (set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| |
| # HACK (sort-of) - part to, spin it back up |
| (set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| else |
| if [ "$(helm version -s --template '{{.Server.SemVer}}')" != "$HELM_VERSION" ]; then |
| espin "$NOT_VERIFIED" |
| bspin - "Sync Tiller server version with helm client" |
| (set -x; helm init --upgrade --force-upgrade --wait >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| else |
| espin "$VERIFIED" |
| fi |
| |
| fi |
| wait_for_pods - "kube-system" 1 "includes" "Waiting for Tiller POD to start" "$NO_LABEL" "tiller-deploy-.*" |
| |
| REPOS="onf|https://charts.opencord.org|ONF_VOLTHA \ |
| stable|https://kubernetes-charts.storage.googleapis.com|Google_Stable \ |
| incubator|https://kubernetes-charts-incubator.storage.googleapis.com|Google_Incubator" |
| |
| if is_in "$WITH_ONOS" "yes,legacy,classic"; then |
| REPOS+=" onos|https://charts.onosproject.org|ONF_ONOS \ |
| atomix|https://charts.atomix.io|ONF_Atomi" |
| fi |
| if [ "$CONFIG_SADIS" == "external" ]; then |
| REPOS+=" bbsim-sadis|https://ciena.github.io/bbsim-sadis-server/charts|Custom_BBSIM_SADIS_Server" |
| fi |
| if [ "$WITH_EFK" == "yes" ]; then |
| REPOS+=" elastic|https://helm.elastic.co|Elastic \ |
| kiwigrid|https://kiwigrid.github.io|Fluentd-ElasticSearch" |
| fi |
| REPO_UPDATE_REQ="no" |
| |
| bspin - "Verify Helm Repository" |
| for REPO in $REPOS; do |
| REPO_NAME="$(echo "$REPO" | cut -d\| -f1)" |
| REPO_URL="$(echo "$REPO" | cut -d\| -f2)" |
| REPO_LABEL="$(echo "$REPO" | cut -d\| -f3 | sed -e 's/_/ /g')" |
| |
| sspin - "Verify Helm Repository: $REPO_LABEL$CEOL" |
| if [ "$(helm repo list 2>/dev/null | grep -c "$REPO_NAME" 2>/dev/null)" -eq 0 ]; then |
| sspin - "Add Helm Repository: $REPO_LABEL$CEOL" |
| (set -x; helm repo add "$REPO_NAME" "$REPO_URL" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| REPO_UPDATE_REQ="yes" |
| fi |
| done |
| sspin - "Verify Helm Repositories$CEOL" |
| espin - "$VERIFIED" |
| |
| if [ "$REPO_UPDATE_REQ" == "yes" ] || [ "$UPDATE_HELM_REPOS" == "yes" ]; then |
| bspin - "Update Helm repository cache" |
| (set -x; helm repo update >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| fi |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| # Resolve chart versions and log them for debug/support |
| RESOLVED_VOLTHA_CHART_VERSION=$(resolve_chart_version "$VOLTHA_CHART" "$VOLTHA_CHART_VERSION") |
| RESOLVED_VOLTHA_BBSIM_CHART_VERSION=$(resolve_chart_version "$VOLTHA_BBSIM_CHART" "$VOLTHA_BBSIM_CHART_VERSION") |
| RESOLVED_VOLTHA_ADAPTER_SIM_CHART_VERSION=$(resolve_chart_version "$VOLTHA_ADAPTER_SIM_CHART" "$VOLTHA_ADAPTER_SIM_CHART_VERSION") |
| RESOLVED_VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=$(resolve_chart_version "$VOLTHA_ADAPTER_OPEN_OLT_CHART" "$VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION") |
| RESOLVED_VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=$(resolve_chart_version "$VOLTHA_ADAPTER_OPEN_ONU_CHART" "$VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION") |
| RESOLVED_ONOS_CHART_VERSION=$(resolve_chart_version "$ONOS_CHART" "$ONOS_CHART_VERSION") |
| RESOLVED_ONOS_CLASSIC_CHART_VERSION=$(resolve_chart_version "$ONOS_CLASSIC_CHART" "$ONOS_CLASSIC_CHART_VERSION") |
| RESOLVED_KAFKA_CHART_VERSION=$(resolve_chart_version "$KAFKA_CHART" "$KAFKA_CHART_VERSION") |
| RESOLVED_ELASTICSEARCH_CHART_VERSION=$(resolve_chart_version "$ELASTICSEARCH_CHART" "$ELASTICSEARCH_CHART_VERSION") |
| RESOLVED_KIBANA_CHART_VERSION=$(resolve_chart_version "$KIBANA_CHART" "$KIBANA_CHART_VERSION") |
| RESOLVED_FLUENTD_ELASTICSEARCH_CHART_VERSION=$(resolve_chart_version "$FLUENTD_ELASTICSEARCH_CHART" "$FLUENTD_ELASTICSEARCH_CHART_VERSION") |
| RESOLVED_BBSIM_SADIS_SERVER_CHART_VERSION=$(resolve_chart_version "$BBSIM_SADIS_SERVER_CHART" "$BBSIM_SADIS_SERVER_CHART_VERSION") |
| RESOLVED_RADIUS_CHART_VERSION=$(resolve_chart_version "$RADIUS_CHART" "$RADIUS_CHART_VERSION") |
| cat <<EOV >>"$LOG" |
| Resolved helm charts and versions: |
| $VOLTHA_CHART:$RESOLVED_VOLTHA_CHART_VERSION |
| $VOLTHA_BBSIM_CHART:$RESOLVED_VOLTHA_BBSIM_CHART_VERSION |
| $VOLTHA_ADAPTER_SIM_CHART:$RESOLVED_VOLTHA_ADAPTER_SIM_CHART_VERSION |
| $VOLTHA_ADAPTER_OPEN_OLT_CHART:$RESOLVED_VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION |
| $VOLTHA_ADAPTER_OPEN_ONU_CHART:$RESOLVED_VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION |
| $ONOS_CHART:$RESOLVED_ONOS_CHART_VERSION |
| $ONOS_CLASSIC_CHART:$RESOLVED_ONOS_CLASSIC_CHART_VERSION |
| $KAFKA_CHART:$RESOLVED_KAFKA_CHART_VERSION |
| $ELASTICSEARCH_CHART:$RESOLVED_ELASTICSEARCH_CHART_VERSION |
| $KIBANA_CHART:$RESOLVED_KIBANA_CHART_VERSION |
| $FLUENTD_ELASTICSEARCH_CHART:$RESOLVED_FLUENTD_ELASTICSEARCH_CHART_VERSION |
| $BBSIM_SADIS_SERVER_CHART:$RESOLVED_BBSIM_SADIS_SERVER_CHART_VERSION |
| $RADIUS_CHART:$RESOLVED_RADIUS_CHART_VERSION |
| EOV |
| |
| STIME="$(date +%s)" |
| bspin "Verify Helm values file: $NAME-values.yaml" |
| if [ ! -r "./$NAME-values.yaml" ]; then |
| espin "$NOT_VERIFIED" |
| bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD" |
| ERR_OUT="$(mktemp)" |
| if ! (set -x; curl --fail -o "./$NAME-values.yaml" -sSL "https://raw.githubusercontent.com/opencord/kind-voltha/$VK_RELEASE/$TYPE-values.yaml" >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1; then |
| espin - "$THEX" |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-values.yaml${NORMAL}${RED} - $(cat "$ERR_OUT")${NORMAL}" |
| echo "ERROR: $(cat "$ERR_OUT")" >>"$LOG" |
| rm -rf "$ERR_OUT" "./$NAME-values.yaml" |
| exit 1 |
| fi |
| rm -rf "$ERR_OUT" |
| espin - "$VERIFIED" |
| else |
| espin "$VERIFIED" |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| STIME="$(date +%s)" |
| bspin "Verify or download chart specific values files $DOWNLOAD" |
| VALUES_FILES="monkey-values.yaml" |
| ERR_OUT="$(mktemp)" |
| for i in $VALUES_FILES; do |
| if [ ! -r ./$i ]; then |
| if ! (set -x; curl --fail -o "./$i" -sSL "https://raw.githubusercontent.com/opencord/kind-voltha/$VK_RELEASE/$i" >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1; then |
| espin "$THEX" |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat "$ERR_OUT")${NORMAL}" |
| echo "ERROR: $i - $(cat "$ERR_OUT")" >>"$LOG" |
| rm -rf "$ERR_OUT" "./$i" |
| exit 1 |
| fi |
| rm -rf "$ERR_OUT" |
| fi |
| done |
| rm -rf "$ERR_OUT" |
| espin "$VERIFIED" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| if [ "$WITH_CHAOS" == "yes" ]; then |
| bspin "Verify or clone kube-monkey helm chart $DOWNLOAD" |
| if [ -r ./kube-monkey ]; then |
| espin "$VERIFIED" |
| else |
| espin "$NOT_VERIFIED" |
| bspin - "GIT clone kube-monkey" |
| (set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| fi |
| fi |
| |
| if [ "$JUST_K8S" == "yes" ]; then |
| echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye." |
| echo "" |
| echo "Please issue the following commands in your terminal to ensure that you" | tee -a "$LOG" |
| echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a "$LOG" |
| echo "tools required by VOLTHA in your command path. " | tee -a "$LOG" |
| echo "" | tee -a "$LOG" |
| echo -en "$BOLD" |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a "$LOG" |
| fi |
| echo "export PATH=$GOPATH/bin:\$PATH" | tee -a "$LOG" |
| echo -en "$NORMAL" |
| echo "" | tee -a "$LOG" |
| echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a "$LOG" |
| exit 0 |
| fi |
| |
| STIME="$(date +%s)" |
| if is_in "$WITH_ONOS" "yes,legacy,classic"; then |
| if is_in "$WITH_ONOS" "legacy"; then |
| bspin "Verify ONOS LEGACY installed $BIRD" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^onos\$" | wc -l)" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - "$INFRA_NS" onos "$ONOS_CHART" "$ONOS_CHART_VERSION" "+onos" "$_HELM_DESC ONOS LEGACY" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| else |
| espin "$VERIFIED" |
| fi |
| wait_for_pods - "$INFRA_NS" 1 "includes" "Waiting for ONOS to start" "$NO_LABEL" "onos-.*" |
| |
| if [ "$WITH_PORT_FORWARDS" == "yes" ]; then |
| bspin - "Forward ONOS API port $FORWARD" |
| kill_port_forward onos-ui |
| port_forward "$INFRA_NS" onos-ui "$ONOS_API_PORT:8181" |
| espin - "$VERIFIED" |
| bspin - "Forward ONOS SSH port $FORWARD" |
| kill_port_forward onos-ssh |
| port_forward "$INFRA_NS" onos-ssh "$ONOS_SSH_PORT:8101" |
| espin - "$VERIFIED" |
| _ONOS_API_EP="127.0.0.1:$ONOS_API_PORT" |
| else |
| _ONOS_API_EP="$(get_service_ep "$INFRA_NS" onos-ui)" |
| fi |
| elif is_in "$WITH_ONOS" "yes,classic"; then |
| bspin "Verify ONOS CLASSIC installed $BIRD" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^onos\$" | wc -l)" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| # ONOS CLASSIC identifies its image repo/tag/pullPolicy differently, so yq is used to grab the values from the |
| # values value |
| YAML_VALUES=$(INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set replicas=$NUM_OF_ONOS --set atomix.replicas=$NUM_OF_ATOMIX" \ |
| helm_values "$INFRA_NS" onos "$ONOS_CLASSIC_CHART" "$ONOS_CLASSIC_CHART_VERSION") |
| _ONOS_REPO="$(echo "$YAML_VALUES" | yq read - images.onos.repository)" |
| if [ -z "$_ONOS_REPO" ]; then |
| _ONOS_REPO="voltha/voltha-onos" |
| fi |
| _ONOS_TAG="$(echo "$YAML_VALUES" | yq read - images.onos.tag)" |
| if [ -z "$_ONOS_TAG" ]; then |
| _ONOS_TAG="$(echo "$YAML_VALUES" | yq read - defaults.image_tag)" |
| fi |
| if [ -z "$_ONOS_TAG" ]; then |
| _ONOS_TAG="master" |
| fi |
| _ONOS_PULL_POLICY="$(echo "$YAML_VALUES" | yq read - images.onos.pullPolicy)" |
| if [ -z "$_ONOS_PULL_POLICY" ]; then |
| _ONOS_PULL_POLICY="$(echo "$YAML_VALUES" | yq read - defaults.image_pullPolicy)" |
| fi |
| if [ -z "$_ONOS_PULL_POLICY" ]; then |
| _ONOS_PULL_POLICY="Always" |
| fi |
| |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set image.pullPolicy=$_ONOS_PULL_POLICY,image.repository=$_ONOS_REPO,image.tag=$_ONOS_TAG,replicas=$NUM_OF_ONOS,atomix.replicas=$NUM_OF_ATOMIX" \ |
| helm_install - "$INFRA_NS" onos "$ONOS_CLASSIC_CHART" "$ONOS_CLASSIC_CHART_VERSION" "+onos" "$_HELM_DESC ONOS CLASSIC" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| else |
| espin "$VERIFIED" |
| fi |
| wait_for_pods - "$INFRA_NS" $((NUM_OF_ONOS + NUM_OF_ATOMIX)) "includes" "Waiting for ONOS CLASSIC to start" "$NO_LABEL" "onos-.*" |
| if [ "$WITH_PORT_FORWARDS" == "yes" ]; then |
| bspin - "Forward ONOS API port $FORWARD" |
| kill_port_forward onos-onos-classic-hs |
| port_forward "$INFRA_NS" onos-onos-classic-hs "$ONOS_API_PORT:8181" "$ONOS_SSH_PORT:8101" |
| espin - "$VERIFIED" |
| _ONOS_API_EP="127.0.0.1:$ONOS_API_PORT" |
| else |
| _ONOS_API_EP="$(get_service_ep "$INFRA_NS" onos-onos-classic-hs)" |
| fi |
| elif [ "$WITH_ONOS" == "micro" ]; then |
| bspin "Verify micro-ONOS installed $BIRD" |
| # We should never get here |
| >&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Micro ONOS not currently supported${NORMAL}" |
| exit 1 |
| fi |
| bspin - "Verify or download ONOS configuration support files $DOWNLOAD" |
| ONOS_FILES="olt-onos-enableExtraneousRules.json onos-aaa.json \ |
| onos-dhcpl2relay.json onos-sadis-sample.json" |
| (set -x; mkdir -p ./onos-files >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| ERR_OUT="$(mktemp)" |
| for i in $ONOS_FILES; do |
| if [ ! -r "./onos-files/$i" ]; then |
| if ! (set -x; curl --fail -o "./onos-files/$i" -sSL "https://raw.githubusercontent.com/opencord/kind-voltha/$VK_RELEASE/onos-files/$i" >>"$LOG" 2>"$ERR_OUT") >>"$LOG" 2>&1; then |
| espin - "$THEX" |
| echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat "$ERR_OUT")${NORMAL}" |
| echo "ERROR: $(cat "$ERR_OUT")" >>"$LOG" |
| rm -rf "$ERR_OUT" "./onos-files/$i" |
| exit 1 |
| fi |
| rm -rf "$ERR_OUT" |
| fi |
| done |
| rm -rf "$ERR_OUT" |
| espin - "$VERIFIED" |
| |
| if [ "$INSTALL_ONOS_APPS" == "yes" ]; then |
| bspin - "Installing custom ONOS applications" |
| if [ -x onos-files/onos-apps ] && [ "$(find onos-files/onos-apps -name "*.oar" 2>/dev/null | wc -l)" -gt 0 ]; then |
| for OAR in onos-files/onos-apps/*.oar; do |
| sspin - "Installing custom ONOS applications - $OAR$CEOL" |
| override_onos_app "$OAR" |
| done |
| espin - "$VERIFIED Installing custom ONOS applications$CEOL" |
| else |
| espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found" |
| fi |
| fi |
| |
| if [ "$WITH_KAFKA" != "no" ]; then |
| check_onos_app_active org.opencord.kafka |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| _HOST=kafka.$INFRA_NS.svc |
| _PORT=9092 |
| elif [ "$WITH_KAFKA" != "no" ]; then |
| _HOST="$(echo "$WITH_KAFKA" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_KAFKA" | cut -s -d: -f2)" |
| _PORT=${_PORT:-9092} |
| fi |
| push_onos_config "json" "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" \ |
| "$(cat <<EOJ | tr -d '[:space:]' |
| { |
| "kafka": { |
| "bootstrapServers": "$_HOST:$_PORT" |
| } |
| } |
| EOJ |
| )" |
| fi |
| check_onos_app_active org.opencord.dhcpl2relay |
| push_onos_config "file" "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json" |
| check_onos_app_active org.opencord.olt |
| # FIXME use WITH_DHCP and WITH_EAPOL flags to configre OLT App |
| # Default value for "enableEapol" is true in OLT App |
| if [ "$WITH_EAPOL" == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":true}' |
| elif [ "$WITH_EAPOL" == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":false}' |
| fi |
| # Default value for "enableDhcpOnProvisioning" is false and for "enableDhcpV4" is true in OLT App |
| if [ "$WITH_DHCP" == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":true,"enableDhcpV4":true}' |
| elif [ "$WITH_DHCP" == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":false,"enableDhcpV4":false}' |
| fi |
| # Default value for "enableIgmpOnProvisioning" is false in OLT App |
| if [ "$WITH_IGMP" == "yes" ]; then |
| push_onos_config "json" "Enable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":true}' |
| elif [ "$WITH_IGMP" == "no" ]; then |
| push_onos_config "json" "Disable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":false}' |
| fi |
| if [ "$ENABLE_ONOS_EXTRANEOUS_RULES" == "yes" ]; then |
| push_onos_config "file" "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json" |
| fi |
| if is_in "$CONFIG_SADIS" "yes,file"; then |
| check_onos_app_active org.opencord.sadis |
| push_onos_config "file" "[optional] Push ONOS SADIS Configuration: $SADIS_CFG" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG" |
| elif [ "$CONFIG_SADIS" == "bbsim" ]; then |
| push_onos_config "json" \ |
| "[optional] Push ONOS configuration for BBSIM SADIS servers" \ |
| "network/configuration/apps/org.opencord.sadis" \ |
| "$(cat <<EOJ | tr -d '[:space:]' |
| { |
| "sadis": { |
| "integration": { |
| "url": "http://$BBSIM_SADIS_SVC.$BBSIM_NS.svc:50074/v2/subscribers/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| }, |
| "bandwidthprofile": { |
| "integration": { |
| "url": "http://$BBSIM_SADIS_SVC.$BBSIM_NS.svc:50074/v2/bandwidthprofiles/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| } |
| } |
| EOJ |
| )" |
| elif [ "$CONFIG_SADIS" == "external" ]; then |
| if kubectl get -n "$BBSIM_NS" svc/bbsim-sadis-server-bbsim-sadis-server >/dev/null 2>&1; then |
| BBSIM_SADIS_SVC="bbsim-sadis-server-bbsim-sadis-server" |
| else |
| BBSIM_SADIS_SVC="bbsim-sadis-server" |
| fi |
| push_onos_config "json" \ |
| "[optional] Push ONOS configuration for custom SADIS and Bandwidth Profile servers" \ |
| "network/configuration/apps/org.opencord.sadis" \ |
| "$(cat <<EOJ | tr -d '[:space:]' |
| { |
| "sadis": { |
| "integration": { |
| "url": "http://$BBSIM_SADIS_SVC.$BBSIM_NS.svc:58080/subscribers/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| }, |
| "bandwidthprofile": { |
| "integration": { |
| "url": "http://$BBSIM_SADIS_SVC.$BBSIM_NS.svc:58080/profiles/%s", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| } |
| } |
| EOJ |
| )" |
| elif [ "$CONFIG_SADIS" == "url" ]; then |
| push_onos_config "json" \ |
| "[optional] Push ONOS configuration for custom SADIS and Bandwidth Profile servers" \ |
| "network/configuration/apps/org.opencord.sadis" \ |
| "$(cat <<EOJ | tr -d '[:space:]' |
| { |
| "sadis": { |
| "integration": { |
| "url": "$SADIS_SUBSCRIBERS", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| }, |
| "bandwidthprofile": { |
| "integration": { |
| "url": "$SADIS_BANDWIDTH_PROFILES", |
| "cache": { |
| "enabled": true, |
| "maxsize": 50, |
| "ttl": "PT1m" |
| } |
| } |
| } |
| } |
| EOJ |
| )" |
| fi |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| if is_in "$WITH_ETCD" "yes,external"; then |
| STIME="$(date +%s)" |
| bspin "Verify external ETCD cluster $OLD_KEY" |
| EXPECT="$(yq r - "etcd.replicas" <"$NAME-values.yaml")" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^etcd\$" | wc -l)" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| helm_install - "$INFRA_NS" etcd "$ETCD_CHART" "$ETCD_CHART_VERSION" etcd "$_HELM_DESC external ETCD cluster" |
| else |
| espin "$VERIFIED" |
| fi |
| wait_for_pods - "$INFRA_NS" "$EXPECT" "includes" "Waiting for ETCD cluster to start" "$NO_LABEL" "etcd-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| _TMP="$(mktemp -u)" |
| _COUNT="$(test "$TYPE" == "minimal" && echo "1" || echo "3")" |
| cat << EOC > "$_TMP" |
| configurationOverrides: |
| "default.replication.factor": $_COUNT |
| "offsets.topic.replication.factor": $_COUNT |
| "log.retention.hours": 4 |
| "log.message.timestamp.type": "LogAppendTime" |
| persistence: |
| enabled: false |
| zookeeper: |
| replicaCount: 1 |
| persistence: |
| enabled: false |
| replicas: $_COUNT |
| EOC |
| STIME="$(date +%s)" |
| bspin "Verify external Kafka cluster $OLD_KEY" |
| EXPECT="$(test "$TYPE" == "minimal" && echo "2" || echo "4")" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^kafka\$" | wc -l)" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" -f $_TMP" |
| helm_install - "$INFRA_NS" kafka "$KAFKA_CHART" "$KAFKA_CHART_VERSION" kafka "$_HELM_DESC external Kafka cluster" |
| else |
| espin "$VERIFIED" |
| fi |
| wait_for_pods - "$INFRA_NS" "$EXPECT" "includes" "Waiting for Kafka cluster to start" "$NO_LABEL" "kafka-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| rm -rf "$_TMP" |
| fi |
| |
| STIME="$(date +%s)" |
| EXPECT=2 |
| # therecanbeonlyone set hardcoded to true for backward compatibility |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set therecanbeonlyone=true" |
| case $WITH_ETCD in |
| no) |
| ;; |
| yes|external) |
| _HOST="etcd.$INFRA_NS.svc" |
| _PORT=2379 |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT" |
| ;; |
| *) |
| _HOST="$(echo "$WITH_ETCD" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_ETCD" | cut -s -d: -f2)" |
| _PORT=${_PORT:-2379} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT" |
| ;; |
| esac |
| case $WITH_KAFKA in |
| no) |
| ;; |
| yes|external) |
| _HOST=kafka.$INFRA_NS.svc |
| _PORT=9092 |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT" |
| ;; |
| *) |
| _HOST="$(echo "$WITH_KAFKA" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_KAFKA" | cut -s -d: -f2)" |
| _PORT=${_PORT:-9092} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT" |
| ;; |
| esac |
| |
| if is_in "$WITH_ONOS" "legacy"; then |
| _HOST=onos-openflow.$INFRA_NS.svc |
| _PORT=6653 |
| elif is_in "$WITH_ONOS" "yes,classic"; then |
| _HOST=onos-onos-classic-hs.$INFRA_NS.svc |
| _PORT=6653 |
| elif [ "$WITH_ONOS" != "no" ]; then |
| _HOST="$(echo "$WITH_ONOS" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_ONOS" | cut -s -d: -f2)" |
| _PORT=${_PORT:-6653} |
| fi |
| |
| compare_versions "$RESOLVED_VOLTHA_CHART_VERSION" 2.4.2 |
| if [ "$?" == "1" ]; then |
| # voltha chart > 2.4.2 uses list of controllers |
| for NUM in $(seq 0 $((NUM_OF_ONOS-1))); do |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.controller[$NUM].service=onos-onos-classic-$NUM.onos-onos-classic-hs.$INFRA_NS.svc --set services.controller[$NUM].port=6653" |
| done |
| else |
| # voltha chart <= 2.4.2 uses single controller |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.controller.service=$_HOST --set services.controller.port=$_PORT" |
| fi |
| |
| bspin "Verify VOLTHA installed $HIGH_VOLTAGE" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$VOLTHA_NS" "^voltha\$" | wc -l)" -ne 1 ]; then |
| espin "$NOT_VERIFIED" |
| helm_install - "$VOLTHA_NS" voltha "$VOLTHA_CHART" "$VOLTHA_CHART_VERSION" "+voltha" "$_HELM_DESC VOLTHA Core" |
| else |
| espin "$VERIFIED" |
| fi |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| |
| VOLTHA="voltha-ofagent-.* \ |
| rw-core.* \ |
| voltha-zookeeper-.*" |
| wait_for_pods - "$VOLTHA_NS" "$EXPECT" "includes" "Waiting for VOLTHA Core to start" "$NO_LABEL" "$VOLTHA" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| |
| if [ "$WITH_ADAPTERS" == "yes" ]; then |
| STIME="$(date +%s)" |
| EXPECT=0 |
| if is_in "$WITH_ETCD" "yes,external"; then |
| _HOST=etcd.$INFRA_NS.svc |
| _PORT=2379 |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT" |
| elif [ "$WITH_ETCD" != "no" ]; then |
| _HOST="$(echo "$WITH_ETCD" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_ETCD" | cut -s -d: -f2)" |
| _PORT=${_PORT:-2379} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| _HOST=kafka.$INFRA_NS.svc |
| _PORT=9092 |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT" |
| elif [ "$WITH_KAFKA" != "no" ]; then |
| _HOST="$(echo "$WITH_KAFKA" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_KAFKA" | cut -s -d: -f2)" |
| _PORT=${_PORT:-9092} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT" |
| fi |
| echo -e "Verify Adapters $PLUG" |
| if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then |
| bspin - "Verify Simulated Adapters installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$ADAPTER_NS" "^sim\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| helm_install - "$ADAPTER_NS" sim "$VOLTHA_ADAPTER_SIM_CHART" "$VOLTHA_ADAPTER_SIM_CHART_VERSION" - "$_HELM_DESC Simulated Adapters" |
| else |
| espin - "$VERIFIED" |
| fi |
| EXPECT="$((EXPECT + 2))" |
| fi |
| |
| if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then |
| bspin - "Verify OpenOLT Adapter installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$ADAPTER_NS" "^open-olt\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| helm_install - "$ADAPTER_NS" open-olt "$VOLTHA_ADAPTER_OPEN_OLT_CHART" "$VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION" "+open-olt" "$_HELM_DESC OpenOLT Adapter" |
| else |
| espin - "$VERIFIED" |
| fi |
| EXPECT="$((EXPECT + 1))" |
| bspin - "Verify OpenONU Adapter installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$ADAPTER_NS" "^open-onu\$" | wc -l)" -ne 1 ]; then |
| _ORIGINAL_EXTRA_HELM_INSTALL_ARGS="$INTERNAL_EXTRA_HELM_INSTALL_ARGS" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set replicas.adapter_open_onu=$NUM_OF_OPENONU" |
| if [ "$WITH_INCREMENTAL_EVTO_UPDATE" == "yes" ]; then |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set defaults.incremental_evto_update=true" |
| fi |
| espin - "$NOT_VERIFIED" |
| helm_install - "$ADAPTER_NS" open-onu "$VOLTHA_ADAPTER_OPEN_ONU_CHART" "$VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION" "+open-onu" "$_HELM_DESC OpenONU Adapter" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="$_ORIGINAL_EXTRA_HELM_INSTALL_ARGS" |
| else |
| espin - "$VERIFIED" |
| fi |
| EXPECT=$((EXPECT + NUM_OF_OPENONU)) |
| fi |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| |
| ADAPTERS="adapter-.*" |
| wait_for_pods - "$ADAPTER_NS" "$EXPECT" "includes" "Waiting for adapters to start" "$NO_LABEL" "$ADAPTERS" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if [ "$WITH_BBSIM" == "yes" ]; then |
| STIME="$(date +%s)" |
| echo -e "Verify BBSIM $PLUG" |
| bspin - "Verify BBSIM Installed" |
| for instance in $(seq 0 $((NUM_OF_BBSIM-1))); do |
| |
| if [ "$LEGACY_BBSIM_INDEX" == "yes" ]; then |
| if [ "$instance" -eq 0 ]; then |
| instance_num="" |
| else |
| instance_num=$instance |
| fi |
| else |
| instance_num=$instance |
| fi |
| |
| |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$BBSIM_NS" "^bbsim${instance_num}\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| S_TAG="$((900+instance))" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set olt_id=$instance,s_tag=$S_TAG" |
| if [ "$WITH_EAPOL" == "yes" ]; then |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set auth=true" |
| else |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set auth=false" |
| fi |
| if [ "$WITH_DHCP" == "yes" ]; then |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set dhcp=true" |
| else |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set dhcp=false" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| _HOST=kafka.$INFRA_NS.svc |
| _PORT=9092 |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafkaAddress=$_HOST:$_PORT" |
| elif [ "$WITH_KAFKA" != "no" ]; then |
| _HOST="$(echo "$WITH_KAFKA" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_KAFKA" | cut -s -d: -f2)" |
| _PORT=${_PORT:-9092} |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafkaAddress=$_HOST:$_PORT" |
| fi |
| helm_install - "$BBSIM_NS" "bbsim${instance_num}" "$VOLTHA_BBSIM_CHART" "$VOLTHA_BBSIM_CHART_VERSION" "+bbsim" "$_HELM_DESC BBSIM${instance_num}" |
| INTERNAL_EXTRA_HELM_INSTALL_ARGS= |
| else |
| espin - "$VERIFIED" |
| fi |
| done |
| wait_for_pods - "$BBSIM_NS" "$NUM_OF_BBSIM" "includes" "Waiting for BBSIM to start" "$BBSIM_LABEL" "bbsim*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if [ "$WITH_EFK" == "yes" ]; then |
| STIME="$(date +%s)" |
| echo -e "Verify EFK $PLUG" |
| bspin - "Verify EFK Installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^elasticsearch\$" | wc -l)" -ne 1 ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^kibana\$" | wc -l)" -ne 1 ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^fluentd\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^elasticsearch\$" | wc -l)" -ne 1 ]; then |
| helm_install - "$INFRA_NS" elasticsearch "$ELASTICSEARCH_CHART" "$ELASTICSEARCH_CHART_VERSION" elasticsearch "$_HELM_DESC elasticsearch" |
| fi |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^kibana\$" | wc -l)" -ne 1 ]; then |
| helm_install - "$INFRA_NS" kibana "$KIBANA_CHART" "$KIBANA_CHART_VERSION" kibana "$_HELM_DESC kibana" |
| fi |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^fluentd\$" | wc -l)" -ne 1 ]; then |
| helm_install - "$INFRA_NS" fluentd "$FLUENTD_ELASTICSEARCH_CHART" "$FLUENTD_ELASTICSEARCH_CHART_VERSION" fluentd-elasticsearch "$_HELM_DESC fluentd-elasticsearch" |
| fi |
| else |
| espin - "$VERIFIED" |
| fi |
| EXPECT=2 # for elastic and kibana |
| if [ "$TYPE" == "minimal" ]; then |
| EXPECT=$((EXPECT + 2)) # for fluentd on worker 2 worker nodes |
| else |
| EXPECT=$((EXPECT + 3)) # for fluentd on worker 3 worker nodes |
| fi |
| if [ "$SCHEDULE_ON_CONTROL_NODES" == "yes" ]; then |
| EXPECT=$((EXPECT + 1)) # for fluentd on the control plan node |
| fi |
| |
| wait_for_pods - "$INFRA_NS" "$EXPECT" "includes" "Waiting for EFK to start" "$NO_LABEL" "fluentd-* elasticsearch-* kibana-*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if [ "$CONFIG_SADIS" == "external" ]; then |
| STIME="$(date +%s)" |
| echo -e "Verify BBSIM SADIS Service $PLUG" |
| bspin - "Verify required configmap" |
| (set -x; kubectl -n "$BBSIM_NS" delete --ignore-not-found configmap kube-config >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| (set -x; kubectl -n "$BBSIM_NS" create configmap kube-config "--from-file=kube_config=$KUBECONFIG" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin - "$VERIFIED" |
| bspin - "Verify BBSIM SADIS Service Installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$BBSIM_NS" "^bbsim-sadis-server\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| helm_install - "$BBSIM_NS" bbsim-sadis-server "$BBSIM_SADIS_SERVER_CHART" "$BBSIM_SADIS_SERVER_CHART_VERSION" "+sadis" "$_HELM_DESC BBSIM SADIS Server" |
| else |
| espin - "$VERIFIED" |
| fi |
| wait_for_pods - "$BBSIM_NS" 1 "includes" "Waiting for BBSIM SADIS Server to start" "$NO_LABEL" "bbsim-sadis-server-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if [ "$WITH_RADIUS" == "yes" ]; then |
| STIME="$(date +%s)" |
| echo -e "Verify RADIUS $LOCK" |
| bspin - "Verify RADIUS Installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace "$INFRA_NS" "^radius\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| helm_install - "$INFRA_NS" radius "$RADIUS_CHART" "$RADIUS_CHART_VERSION" "+radius" "$_HELM_DESC RADIUS" |
| else |
| espin - "$VERIFIED" |
| fi |
| wait_for_pods - "$INFRA_NS" 1 "includes" "Waiting for RADIUS to start" "$NO_LABEL" "radius-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if [ "$WITH_PORT_FORWARDS" == "yes" ]; then |
| STIME="$(date +%s)" |
| bspin - "Forward VOLTHA API port $FORWARD" |
| kill_port_forward voltha-api voltha-voltha-api |
| VOLTHA_PREFIX= |
| if kubectl get -n "$VOLTHA_NS" "svc/voltha-voltha-api" >/dev/null 2>&1; then |
| VOLTHA_PREFIX="voltha-" |
| fi |
| |
| port_forward "$VOLTHA_NS" "${VOLTHA_PREFIX}voltha-api" "$VOLTHA_API_PORT:55555" |
| espin - "$VERIFIED" |
| if is_in "$WITH_ETCD" "yes,external"; then |
| bspin - "Forward VOLTHA ETCD port $FORWARD" |
| kill_port_forward "etcd" |
| port_forward "$INFRA_NS" "etcd" "$VOLTHA_ETCD_PORT:2379" |
| espin - "$VERIFIED" |
| fi |
| if is_in "$WITH_KAFKA" "yes,external"; then |
| bspin - "Forward VOLTHA Kafka port $FORWARD" |
| kill_port_forward "kafka" |
| port_forward "$INFRA_NS" kafka "$VOLTHA_KAFKA_PORT:9092" |
| espin - "$VERIFIED" |
| fi |
| if [ "$WITH_EFK" == "yes" ]; then |
| bspin - "Forward EFK port $FORWARD" |
| kill_port_forward elasticsearch-master |
| kill_port_forward kibana-kibana |
| port_forward "$INFRA_NS" elasticsearch-master "$ELASTICSEARCH_PORT:9200" |
| port_forward "$INFRA_NS" kibana-kibana "$KIBANA_PORT:5601" |
| espin - "$VERIFIED" |
| fi |
| if [ "$WITH_PPROF" == "yes" ]; then |
| VOLTHA_OPENOLT_PREFIX= |
| if kubectl get -n "$ADAPTER_NS" "svc/open-olt-adapter-open-olt-profiler" >/dev/null 2>&1; then |
| VOLTHA_OPENOLT_PREFIX="open-olt-" |
| fi |
| bspin - "Forward PProf ports port $FORWARD" |
| kill_port_forward voltha-rw-core-profiler voltha-voltha-rw-core-profiler |
| kill_port_forward adapter-open-olt-profiler open-olt-adapter-open-olt-profiler |
| kill_port_forward voltha-of-agent-profiler voltha-voltha-of-agent-profiler |
| port_forward "$VOLTHA_NS" "${VOLTHA_PREFIX}voltha-rw-core-profiler" "$VOLTHA_PPROF_PORT:6060" |
| port_forward "$ADAPTER_NS" "${VOLTHA_OPENOLT_PREFIX}adapter-open-olt-profiler" "$OPENOLT_PPROF_PORT:6060" |
| port_forward "$VOLTHA_NS" "${VOLTHA_PREFIX}voltha-of-agent-profiler" "$OFAGENT_PPROF_PORT:6060" |
| espin - "$VERIFIED" |
| fi |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| if is_in "$WITH_ONOS" "yes,legacy,classic" && [ "$WITH_RADIUS" != "no" ]; then |
| SVC_NAME=radius |
| if kubectl get -n "$INFRA_NS" "svc/radius-freeradius" >/dev/null 2>&1; then |
| SVC_NAME="radius-freeradius" |
| fi |
| _HOST="$SVC_NAME.$INFRA_NS.svc" |
| _PORT=1812 |
| if [ "$WITH_RADIUS" != "yes" ]; then |
| _HOST="$(echo "$WITH_RADIUS" | cut -d: -f1)" |
| _PORT="$(echo "$WITH_RADIUS" | cut -s -d: -f2)" |
| _PORT=${_PORT:-1812} |
| fi |
| bspin "Configure ONOS RADIUS Connection $GEAR" |
| (set -x; sed -e "s/:RADIUS_SVC:/$_HOST/g" -e "s/:RADIUS_PORT:/$_PORT/" onos-files/onos-aaa.json | curl --fail -sSL --user karaf:karaf -X POST "http://$_ONOS_API_EP/onos/v1/network/configuration/apps/org.opencord.aaa" -H Content-type:application/json -d@- >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| espin "$VERIFIED" |
| fi |
| |
| if [ "$WITH_EFK" == "yes" ]; then |
| do_curl "" "POST" "" "" "http://localhost:$KIBANA_PORT/api/saved_objects/index-pattern/logst*" "json" '{"attributes":{"title":"logst*","timeFieldName":"@timestamp"}}' "Verify logging index in EFK" "409,200" "-H Content-type:application/json -H kbn-xsrf:true" "$GEAR" |
| # fi |
| fi |
| |
| if [ "$WITH_CHAOS" == "yes" ]; then |
| STIME="$(date +%s)" |
| echo -e "Verify kube-monkey $LOCK" |
| bspin - "Verify kube-monkey Installed" |
| if [ "$HELM_USE_UPGRADE" == "yes" ] || [ "$(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l)" -ne 1 ]; then |
| espin - "$NOT_VERIFIED" |
| helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest - "$_HELM_DESC Chaos Monkey" |
| else |
| espin - "$VERIFIED" |
| fi |
| wait_for_pods - "kube-monkey" 1 "includes" "Waiting for Chaos to start" "$NO_LABEL" "monkey-.*" |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| printtime $((NOW - STIME)) |
| fi |
| fi |
| |
| bspin "Create voltctl configuration file" |
| (set -x; mkdir -p "$HOME/.volt" >>"$LOG" 2>&1) >>"$LOG" 2>&1 |
| MIN_VC_VERSION="$(echo -e "1.0.15\n$VC_VERSION" | sort -V | head -1)" |
| if [ "$WITH_PORT_FORWARDS" == "yes" ]; then |
| KAFKA_FLAG="-k localhost:$VOLTHA_KAFKA_PORT" |
| SERVER_FLAG="-s localhost:$VOLTHA_API_PORT" |
| ETCD_FLAG= |
| if [ "$MIN_VC_VERSION" == "1.0.15" ]; then |
| ETCD_FLAG="-e localhost:$VOLTHA_ETCD_PORT" |
| fi |
| else |
| KAFKA_FLAG="-k $(get_service_ep "$INFRA_NS" kafka)" |
| SERVER_FLAG="-s $(get_service_ep "$VOLTHA_NS" voltha-api)" |
| ETCD_FLAG= |
| if [ "$MIN_VC_VERSION" == "1.0.15" ]; then |
| ETCD_FLAG="-e $(get_service_ep "$INFRA_NS" etcd)" |
| fi |
| fi |
| CMD=("voltctl $KAFKA_FLAG $SERVER_FLAG $ETCD_FLAG config") |
| (set -x; ${CMD[*]} > "$HOME/.volt/config-$NAME" 2>>"$LOG") >>"$LOG" 2>&1 |
| #(set -x; voltctl "$KAFKA_FLAG" "$SERVER_FLAG" "$ETCD_FLAG" config > "$HOME/.volt/config-$NAME" 2>>"$LOG") >>"$LOG" 2>&1 |
| espin "$VERIFIED" |
| |
| if [ ! -f "$NAME-env.sh" ]; then |
| touch "$NAME-env.sh" |
| fi |
| |
| for O in $ALL_OPTIONS; do |
| VAL="$(eval echo "\$$O")" |
| if [ -n "$VAL" ] && [ "$(grep -c "^export $O=" "$NAME-env.sh")" -eq 0 ]; then |
| echo "export $O=\"$(eval echo "\$$O")\"" >> "$NAME-env.sh" |
| fi |
| done |
| |
| if [ "$DEPLOY_K8S" == "yes" ] && [ "$(grep -c "^export KUBECONFIG=" "$NAME-env.sh")" -eq 0 ]; then |
| echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path "--name=voltha-$NAME")\"" >> "$NAME-env.sh" |
| fi |
| |
| if [ "$(grep -c "^export VOLTCONFIG=" "$NAME-env.sh")" -eq 0 ]; then |
| echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> "$NAME-env.sh" |
| fi |
| |
| if [ "$(grep -c "^export PATH=" "$NAME-env.sh")" -eq 0 ]; then |
| echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> "$NAME-env.sh" |
| fi |
| |
| echo "" |
| echo "Please issue the following commands in your terminal to ensure that you" | tee -a "$LOG" |
| echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a "$LOG" |
| echo "tools required by VOLTHA in your command path. " | tee -a "$LOG" |
| echo "" | tee -a "$LOG" |
| echo -en "$BOLD" |
| if [ "$DEPLOY_K8S" == "yes" ]; then |
| echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a "$LOG" |
| fi |
| echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a "$LOG" |
| echo "export PATH=$GOPATH/bin:\$PATH" | tee -a "$LOG" |
| echo -en "$NORMAL" |
| echo "" | tee -a "$LOG" |
| echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a "$LOG" |
| |
| if [ "$WITH_TIMINGS" == "yes" ]; then |
| NOW="$(date +%s)" |
| echo -e "$CLOCK ${BOLD}TOTAL: $(duration $((NOW - TOTAL_START_TIME)))${NORMAL}" |
| fi |