blob: f4e87d0733e2ecc4a367ef09a25f4a07e1c849ff [file] [log] [blame]
#!/bin/bash
# Copyright 2019 Ciena Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
set -f
TOTAL_START_TIME=$(date +%s)
FANCY=${FANCY:-1}
if [ "$TERM X" == " X" ]; then
FANCY=0
fi
# trap ctrl-c and call ctrl_c()
trap ctrl_c INT
function ctrl_c() {
echo -en $CNORM
echo ""
echo "ctrl-c trapped"
echo "Thank you for trying 'voltha up'"
exit
}
HELM_VERSION=${HELM_VERSION:-v2.14.3}
VOLTCTL_VERSION=${VOLTCTL_VERSION:-latest}
KIND_VERSION=${KIND_VERSION:-v0.5.1}
VK_RELEASE=${VK_RELEASE:-master}
BLACK=
RED=
GREEN=
YELLOW=
BLUE=
MAGENTA=
CYAN=
WHITE=
BOLD=
NORMAL=
ERROR=
CEOL=
CNORM=
CIVIS=
if [ $FANCY -eq 1 ]; then
BLACK=$(tput setaf 0)
RED=$(tput setaf 1)
GREEN=$(tput setaf 2)
YELLOW=$(tput setaf 3)
BLUE=$(tput setaf 4)
MAGENTA=$(tput setaf 5)
CYAN=$(tput setaf 6)
WHITE=$(tput setaf 7)
BOLD=$(tput bold)
NORMAL=$(tput sgr0)
ERROR="\xe2\x9c\x97\x20"
CEOL=$(tput el)
CNORM=$(tput cnorm)
CIVIS=$(tput civis)
fi
TYPE=${TYPE:-minimal}
NAME=${NAME:-$TYPE}
ENABLE_ONOS_EXTRANEOUS_RULES=${ENABLE_ONOS_EXTRANEOUS_RULES:-no}
INFRA_NS=${INFRA_NS:-default}
VOLTHA_NS=${VOLTHA_NS:-voltha}
BBSIM_NS=${BBSIM_NS:-voltha}
ADAPTER_NS=${ADAPTER_NS:-voltha}
WITH_TIMINGS=${WITH_TIMINGS:-no}
WITH_BBSIM=${WITH_BBSIM:-no}
WITH_RADIUS=${WITH_RADIUS:-no}
WITH_EAPOL=${WITH_EAPOL:-yes}
WITH_DHCP=${WITH_DHCP:-yes}
WITH_IGMP=${WITH_IGMP:-no}
WITH_ONOS=${WITH_ONOS:-yes}
WITH_CHAOS=${WITH_CHAOS:-no}
WITH_ADAPTERS=${WITH_ADAPTERS:-yes}
WITH_SIM_ADAPTERS=${WITH_SIM_ADAPTERS:-no}
WITH_OPEN_ADAPTERS=${WITH_OPEN_ADAPTERS:-yes}
WITH_PORT_FORWARDS=${WITH_PORT_FORWARDS:-yes}
WITH_KAFKA=${WITH_KAFKA:-yes}
WITH_ETCD=${WITH_ETCD:-yes}
ONLY_ONE=${ONLY_ONE:-yes}
CONFIG_SADIS=${CONFIG_SADIS:-no} # yes | no | file | bbsim | URL
SADIS_SUBSCRIBERS=${SADIS_SUBSCRIBERS:-http://bbsim.$VOLTHA_NS.svc:50074/v2/subscribers/%s}
SADIS_BANDWIDTH_PROFILES=${SADIS_BANDWIDTH_PROFILES:-http://bbsim.$VOLTHA_NS.svc:50074/v2/bandwidthprofiles/%s}
SADIS_CFG=${SADIS_CFG:-onos-files/onos-sadis-sample.json}
INSTALL_ONOS_APPS=${INSTALL_ONOS_APPS:-no}
JUST_K8S=${JUST_K8S:-no}
DEPLOY_K8S=${DEPLOY_K8S:-yes}
INSTALL_KUBECTL=${INSTALL_KUBECTL:-yes}
INSTALL_HELM=${INSTALL_HELM:-yes}
HELM_USE_UPGRADE=${HELM_USE_UPGRADE:-no}
UPDATE_HELM_REPOS=${UPDATE_HELM_REPOS:-yes}
WAIT_ON_DOWN=${WAIT_ON_DOWN:-yes}
WAIT_TIMEOUT=${WAIT_TIMEOUT:-30m}
VOLTHA_DOWN_ON_TIMEOUT=${VOLTHA_DOWN_ON_TIMEOUT:-no}
VOLTHA_LOG_LEVEL=${VOLTHA_LOG_LEVEL:-WARN}
VOLTHA_CHART=${VOLTHA_CHART:-onf/voltha}
VOLTHA_CHART_VERSION=${VOLTHA_CHART_VERSION:-latest}
VOLTHA_BBSIM_CHART=${VOLTHA_BBSIM_CHART:-onf/bbsim}
VOLTHA_BBSIM_CHART_VERSION=${VOLTHA_BBSIM_CHART_VERSION:-latest}
VOLTHA_ADAPTER_SIM_CHART=${VOLTHA_ADAPTER_SIM_CHART:-onf/voltha-adapter-simulated}
VOLTHA_ADAPTER_SIM_CHART_VERSION=${VOLTHA_ADAPTER_SIM_CHART_VERSION:-latest}
VOLTHA_ADAPTER_OPEN_OLT_CHART=${VOLTHA_ADAPTER_OPEN_OLT_CHART:-onf/voltha-adapter-openolt}
VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION:-latest}
VOLTHA_ADAPTER_OPEN_ONU_CHART=${VOLTHA_ADAPTER_OPEN_ONU_CHART:-onf/voltha-adapter-openonu}
VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION=${VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION:-latest}
ONOS_CHART=${ONOS_CHART:-onf/onos}
ONOS_CHART_VERSION=${ONOS_CHART_VERSION:-latest}
EXTRA_HELM_INSTALL_ARGS=${EXTRA_HELM_INSTALL_ARGS:-}
INTERNAL_EXTRA_HELM_INSTALL_ARGS=
NUM_OF_BBSIM=${NUM_OF_BBSIM:-1}
MAX_NUM_OF_BBSIM=10
HAVE_GO=$(which go >/dev/null 2>&1 && echo "yes" || echo "no")
HOSTOS=$(uname -s | tr "[:upper:]" "[:lower:"])
HOSTARCH=$(uname -m | tr "[:upper:]" "[:lower:"])
if [ $HOSTARCH == "x86_64" ]; then
HOSTARCH="amd64"
fi
# check number (range) of bbsim, max bbsim must not exceed 10 instances!
# note: instances will be numbered from 0 to 9
if [ "$1" == "up" ]; then
if [ "$NUM_OF_BBSIM" -lt 1 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is less than 1${NORMAL}"
exit 1
fi
if [ "$NUM_OF_BBSIM" -gt $MAX_NUM_OF_BBSIM ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid setting of BBSIM instances. NUM_OF_BBSIM is greater than $MAX_NUM_OF_BBSIM${NORMAL}"
exit 1
fi
fi
# Verify TYPE setting
if [ $(echo ":minimal:full:" | grep -ic ":$TYPE:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid \$TYPE value of '$TYPE'. Should be 'minimal' or 'full'${NORMAL}"
exit 1
fi
function parseDuration() {
local DUR=$1
local RESULT=0
local TERMS=$(echo $DUR | sed -Ee 's/([sSmMhHdD])/\1 /g' -e 's/,$//g')
for TERM in $TERMS; do
local VALUE=$(echo $TERM | sed -Ee 's/([0-9]+)[sSmMhHdD]/\1/')
local UNIT=$(echo $TERM | sed -Ee 's/[0-9]+([sSmMhHdD])/\1/')
case $UNIT in
s|S)
RESULT=$(($RESULT + $VALUE)) ;;
m|M)
RESULT=$(($RESULT + ($VALUE * 60))) ;;
h|H)
RESULT=$(($RESULT + ($VALUE * 3600))) ;;
d|D)
RESULT=$(($RESULT + ($VALUE * 86400))) ;;
*) ;;
esac
done
echo $RESULT
}
function doTimeout() {
local MSG=$1
2>&1 echo -e "\n${RED}${BOLD}${ERROR}TIMEOUT:${NORMAL}${RED} Operation timed out after '$WAIT_TIMEOUT': $MSG"
exit 125
}
function get_service_ep() {
local NS=$1
local NAME=$2
kubectl -n $NS get service $NAME -o json | jq -r '.spec.clusterIP + ":" + (.spec.ports[0].port|tostring)'
}
# Used to verify configuration values are set to "yes" or "no" value or convert
# equivalents to "yes" or "no"
function verify_yes_no() {
local VAR=$1
local VAL=$(eval echo \$$VAR)
if [ $(echo ":y:yes:true:n:no:false:1:0:" | grep -ic ":$VAL:") -eq 0 ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} Invalid '$VAR' value of '$VAL'. Should be 'yes' or 'no'${NORMAL}"
echo "INVALID"
return 1
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$VAL:") -eq 1 ]; then
echo "yes"
else
echo "no"
fi
return 0
}
ALL_YES_NO="\
ENABLE_ONOS_EXTRANEOUS_RULES \
WITH_TIMINGS \
WITH_BBSIM \
WITH_EAPOL \
WITH_DHCP \
WITH_IGMP \
WITH_CHAOS \
WITH_ADAPTERS \
WITH_SIM_ADAPTERS \
WITH_OPEN_ADAPTERS \
WITH_PORT_FORWARDS \
JUST_K8S \
DEPLOY_K8S \
INSTALL_ONOS_APPS \
INSTALL_KUBECTL \
INSTALL_HELM \
HELM_USE_UPGRADE \
UPDATE_HELM_REPOS \
WAIT_ON_DOWN \
ONLY_ONE \
VOLTHA_DOWN_ON_TIMEOUT \
"
ALL_OPTIONS="\
NAME \
TYPE \
$ALL_YES_NO \
WAIT_TIMEOUT \
VOLTHA_LOG_LEVEL \
VOLTHA_CHART \
VOLTHA_CHART_VERSION \
VOLTHA_BBSIM_CHART \
VOLTHA_BBSIM_CHART_VERSION \
NUM_OF_BBSIM \
VOLTHA_ADAPTER_SIM_CHART \
VOLTHA_ADAPTER_SIM_CHART_VERSION \
VOLTHA_ADAPTER_OPEN_OLT_CHART \
VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION \
VOLTHA_ADAPTER_OPEN_ONU_CHART \
VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION \
ONOS_CHART \
ONOS_CHART_VERSION \
ONOS_API_PORT \
ONOS_SSH_PORT \
CONFIG_SADIS \
SADIS_CFG \
VOLTHA_API_PORT \
VOLTHA_SSH_PORT \
VOLTHA_ETCD_PORT \
VOLTHA_KAFKA_PORT \
VK_RELEASE \
KIND_VERSION \
VOLTCTL_VERSION \
HELM_VERSION \
WITH_RADIUS \
WITH_KAFKA \
WITH_ETCD \
WITH_ONOS \
VOLTHA_NS \
ADAPTER_NS \
INFRA_NS \
BBSIM_NS \
"
# Iterate over yes/no configuration options and validate
for VAR in $ALL_YES_NO; do
eval $VAR=$(verify_yes_no $VAR)
if [ "$(eval echo \$$VAR)" == "INVALID" ]; then
exit 1;
fi
done
# Special case for CONFIG_SADIS
if [ $(echo ":y:yes:true:1:" | grep -ic ":$CONFIG_SADIS:") -eq 1 ]; then
CONFIG_SADIS="yes"
fi
if [ $(echo ":n:no:false:0:" | grep -ic ":$CONFIG_SADIS:") -eq 1 ]; then
CONFIG_SADIS="no"
fi
# Special case for WITH_ONOS, WITH_RADIUS, WITH_KAFKA, and WITH_ETCD
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_KAFKA:") -eq 1 ]; then
WITH_KAFKA="yes"
fi
if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_KAFKA:") -eq 1 ]; then
WITH_KAFKA="no"
fi
if [ $(echo ":external:" | grep -ic ":$WITH_KAFKA:") -eq 1 ]; then
WITH_KAFKA="external"
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_ETCD:") -eq 1 ]; then
WITH_ETCD="yes"
fi
if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_ETCD:") -eq 1 ]; then
WITH_ETCD="no"
fi
if [ $(echo ":external:" | grep -ic ":$WITH_ETCD:") -eq 1 ]; then
WITH_ETCD="external"
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_RADIUS:") -eq 1 ]; then
WITH_RADIUS="yes"
fi
if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_RADIUS:") -eq 1 ]; then
WITH_RADIUS="no"
fi
if [ $(echo ":y:yes:true:1:" | grep -ic ":$WITH_ONOS:") -eq 1 ]; then
WITH_ONOS="yes"
fi
if [ $(echo ":n:no:false:0:" | grep -ic ":$WITH_ONOS:") -eq 1 ]; then
WITH_ONOS="no"
fi
if [ $HELM_USE_UPGRADE == "yes" ]; then
_HELM_DESC="Upgrade/Install"
else
_HELM_DESC="Install"
fi
# Check for prerequiste tools
TOOLS="curl sed jq"
if [ $DEPLOY_K8S == "yes" ]; then
TOOLS+=" docker"
fi
NOT_FOUND=""
for T in $TOOLS; do
if [ -z "$(which $T)" ]; then
NOT_FOUND+=" $T"
fi
done
if [ ! -z "$NOT_FOUND" ]; then
>&2 echo -e "${RED}${BOLD}${ERROR}ERROR:${NORMAL}${RED} The following required tools where not found, please install them:$NOT_FOUND"
exit 1
fi
TIMEOUT_SECONDS=$(parseDuration $WAIT_TIMEOUT)
mkdir -p .voltha
touch .voltha/ports
HAVE=$(grep $NAME .voltha/ports)
if [ "$HAVE X" == " X" ]; then
# Find free port prefix
START=81
while true; do
if [ $(grep -c $START .voltha/ports) -eq 0 ]; then
break
fi
START=$(expr $START + 1)
done
DELTA=$(expr $START - 81)
ONOS_API_PORT=${ONOS_API_PORT:-${START}81}
ONOS_SSH_PORT=${ONOS_SSH_PORT:-${START}01}
VOLTHA_API_PORT=${VOLTHA_API_PORT:-5$(expr 55 + $DELTA)55}
VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(expr 50 + $DELTA)22}
VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(expr 23 + $DELTA)79}
VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92}
else
VALUES=$(echo $HAVE | sed -e 's/\s//g' | cut -d= -f2)
ONOS_API_PORT=${ONOS_API_PORT:-$(echo $VALUES | cut -d, -f1)}
ONOS_SSH_PORT=${ONOS_SSH_PORT:-$(echo $VALUES | cut -d, -f2)}
VOLTHA_API_PORT=${VOLTHA_API_PORT:-$(echo $VALUES | cut -d, -f3)}
VOLTHA_SSH_PORT=${VOLTHA_SSH_PORT:-$(echo $VALUES | cut -d, -f4)}
VOLTHA_ETCD_PORT=${VOLTHA_ETCD_PORT:-$(echo $VALUES | cut -d, -f5)}
VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(echo $VALUES | cut -d, -f6)}
# A bit of a hueristic required here as the KAFKA port forward was
# added after the .voltha/ports files was created. Basically, if
# the VOLTHA_KAFKA_PORT isn't in the file then calculate the original
# DELTA from the VOLTHA_SSH_PORT and apply it to the VOLTHA_KAFKA_PORT
if [ -z "$VOLTHA_KAFKA_PORT" ]; then
DELTA=$((VOLTHA_SSH_PORT/100-50))
VOLTHA_KAFKA_PORT=${VOLTHA_KAFKA_PORT:-$(expr 90 + $DELTA)92}
fi
fi
PORTTMP=$(mktemp -u)
cat .voltha/ports | grep -v $NAME > $PORTTMP
echo "$NAME=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT,$VOLTHA_KAFKA_PORT" >> $PORTTMP
cp $PORTTMP .voltha/ports
rm -f $PORTTMP
export ONOS_API_PORT ONOS_SSH_PORT
IDX=1
CLOCK="TIME:"
SPIN_PARTS=
NOT_VERIFIED=
THEX=
BUILD=
CROSS=
ENTER=
VERIFIED=
HELM=
OLD_KEY=
BIRD=
HIGH_VOLTAGE=
PLUG=
RESTART=
FORWARD=
INSTALL=
STOP=
GO=
DOWNLOAD=
GEAR=
NO_ENTRY=
LOCK=
if [ $FANCY -eq 1 ]; then
SPIN_PARTS="\
\xe2\xa2\x8e\xe2\xa1\xb0 \
\xe2\xa2\x8e\xe2\xa1\xa1 \
\xe2\xa2\x8e\xe2\xa1\x91 \
\xe2\xa2\x8e\xe2\xa0\xb1 \
\xe2\xa0\x8e\xe2\xa1\xb1 \
\xe2\xa2\x8a\xe2\xa1\xb1 \
\xe2\xa2\x8c\xe2\xa1\xb1 \
\xe2\xa2\x86\xe2\xa1\xb1 \
"
CLOCK="\xe2\x8f\xb1"
THEX="${RED}${BOLD}\xe2\x9c\x97\x20${NORMAL}"
ENTER="${YELLOW}${BOLD}\xe2\x8e\x86${NORMAL}"
CROSS="${YELLOW}${BOLD}\xe2\x9c\x9a${NORMAL}"
BUILD="${YELLOW}${BOLD}\xf0\x9f\x8f\x97${NORMAL}"
NOT_VERIFIED="$BUILD"
VERIFIED="${GREEN}${BOLD}\xe2\x9c\x93\x20${NORMAL}"
HELM="${BLUE}${BOLD}\xE2\x8E\x88${NORMAL}"
OLD_KEY="\xF0\x9F\x97\x9D"
BIRD="\xF0\x9F\x90\xA6"
HIGH_VOLTAGE="\xE2\x9A\xA1"
PLUG="\xF0\x9F\xa7\xa9"
RESTART="\xf0\x9f\x94\x84"
FORWARD="\xE2\x87\xA8"
INSTALL="\xF0\x9F\x8F\x97"
STOP="\xf0\x9f\x9b\x91"
GO="\xf0\x9f\x9a\x80"
DOWNLOAD="\xf0\x9f\x93\xa5"
GEAR="\xe2\x9a\x99"
NO_ENTRY="\xe2\x9b\x94"
LOCK="\xf0\x9f\x94\x92"
fi
duration() {
local h=$(expr $1 / 3600)
local m=$(expr $1 % 3600 / 60)
local s=$(expr $1 % 60)
local t=""
if [ $h -gt 0 ]; then
t="$t${h}h"
fi
if [ $m -gt 0 ]; then
t="$t${m}m"
fi
echo "$t${s}s"
}
printtime() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
echo -e "$INDENT $CLOCK $(duration $1)"
}
bspin() {
IDX=1
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
if [ $FANCY -eq 0 ]; then
LINE=$(echo $* | sed -e 's/[\s+-]//g')
if [ "$LINE X" == " X" ]; then
return
fi
echo -e "$CIVIS$INDENT$*"
else
echo -en "$CIVIS$INDENT $*"
fi
}
sspin() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
if [ $FANCY -eq 0 ]; then
LINE=$(echo $* | sed -e 's/[\s+-]//g')
if [ "$LINE X" == " X" ]; then
return
fi
echo -e "$INDENT$*"
else
C=$(echo $SPIN_PARTS | cut '-d ' -f $IDX)
echo -en "\r$INDENT$C $*"
IDX=$(expr $IDX + 1)
if [ $IDX -gt 8 ]; then
IDX=1
fi
fi
}
espin() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=" "
shift
fi
if [ $FANCY -eq 0 ]; then
LINE=$(echo $* | sed -e 's/[\s+-]//g')
if [ "$LINE X" == " X" ]; then
return
fi
echo -e "$INDENT$*"
else
echo -e "\r$INDENT$*$CNORM"
fi
}
if [ "$1" == "get" -a "$2" == "voltconfig" ]; then
echo "$HOME/.volt/config-$NAME"
exit
fi
if [ $# -ne 1 -o $(echo ":up:down:dump:" | grep -c ":$1:") -ne 1 ]; then
>&2 echo "What wouild you like to do today:"
>&2 echo " up - bring up voltha"
>&2 echo " down - tear down voltha"
>&2 echo " dump - create a debug dump of running system"
exit 1
fi
push_onos_config() {
local TYPE=$1
local MSG=$2
local RESOURCE=$3
local DATA=$4
# Thanks to the latest version of ONOS using the return code 207 this gets a
# whole lot nastier. Can't thank them enough for doing this. So in order to
# capture the command and the output in the log file as well as capture the
# status code to verify it is 200 and not 207 mutltiple files and a bit of
# hackery must be used. Thanks again ONOS.
local CMD_ECHO=$(mktemp -u)
local CMD_OUTPUT=$(mktemp -u)
local SC_OUTPUT=$(mktemp -u)
local WAIT_START=$(date +%s)
bspin - "$MSG $GEAR"
while true; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin - "$THEX"
rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT
doTimeout "waiting for ONOS config push on $RESOURCE"
fi
if [ $TYPE == "file" ]; then
(set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data @$DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
RESULT=$?
fi
if [ $TYPE == "json" ]; then
(set -x; curl --fail -sSL --user karaf:karaf -w "%{http_code}" -o $CMD_OUTPUT -X POST -H Content-Type:application/json http://$_ONOS_API_EP/onos/v1/$RESOURCE --data $DATA >$SC_OUTPUT 2>/dev/null) >>$CMD_ECHO 2>&1
RESULT=$?
fi
# Dump everything to the log
cat $CMD_ECHO >> $LOG
test -r $CMD_OUTPUT && cat $CMD_OUTPUT >> $LOG
SC=$(cat $SC_OUTPUT)
echo "RESPONSE CODE: $SC" >> $LOG
echo "ERROR CODE: $RESULT" >> $LOG
# clean up temp files
rm -f $CMD_ECHO $CMD_OUTPUT $SC_OUTPUT
if [ $RESULT -eq 0 -a "$SC" == "200" ]; then
break
fi
sleep 1
sspin -
done
espin - $VERIFIED
}
check_onos_app_active() {
local APP_ID=$1
local WAIT_START=$(date +%s)
bspin - "Checking that $APP_ID is active $CLOCK"
while true; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin - "$THEX"
doTimeout "waiting for ONOS application activation '$APP_ID'"
fi
(set -x; curl --fail -sSL --user karaf:karaf -X GET http://$_ONOS_API_EP/onos/v1/applications/$APP_ID | grep ACTIVE >>$LOG 2>&1) >>$LOG 2>&1
if [ $? -eq 0 ]; then
break
fi
sleep 1
sspin -
done
sleep 5 # OSGI components take a little longer that the app to activate
espin - $VERIFIED
}
override_onos_app() {
local APP=$1
local NAME=$(basename $APP | sed -e 's/^[0-9][0-9]*-//g' -e 's/-.*$//g')
local WAIT_START=$(date +%s)
while true; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin - "$THEX"
doTimeout "waiting to overwrite ONOS application '$APP'"
fi
sspin -
# Attempt to delete old version (if it exists)
(set -x; curl --fail -sSL --user karaf:karaf -X DELETE http://$_ONOS_API_EP/onos/v1/applications/$NAME >>$LOG 2>&1) >>$LOG 2>&1
sspin -
if [ $? -ne 0 ]; then
continue
fi
(set -x; curl --fail -sSL --user karaf:karaf -X POST -H Content-Type:application/octet-stream http://$_ONOS_API_EP/onos/v1/applications?activate=true --data-binary @$APP >>$LOG 2>&1) >>$LOG 2>&1
if [ $? -eq 0 ]; then
break
fi
sleep .2
done
}
activate_onos_app() {
local MSG="$1"
local APP=$2
local WAIT_START=$(date +%s)
bspin - "$MSG $GO"
while true; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin - "$THEX"
doTimeout "waiting to activate ONOS application '$APP'"
fi
sspin -
(set -x; curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/applications/$APP/active >>$LOG 2>&1) >>$LOG 2>&1
if [ $? -eq 0 ]; then
break
fi
sleep .2
done
espin - "$VERIFIED"
}
count_pods() {
local NAMESPACE=$1; shift
if [ "$NAMESPACE" == "all-namespaces" ]; then
NAMESPACE="--all-namespaces"
else
NAMESPACE="-n $NAMESPACE"
fi
local STATES=$1; shift
local PODS=$(kubectl get $NAMESPACE pod -o go-template="{{range .items}}{{.metadata.name}}/{{.status.phase}}/_{{range .status.containerStatuses}}{{.ready}}_{{end}} {{end}}")
local COUNT=0
local PATTERNS="$*"
for POD in $PODS; do
local NAME=$(echo $POD | cut -d/ -f 1)
local STATE=$(echo $POD | cut -d/ -f 2)
local CONTAINERS=$(echo $POD | cut -d/ -f 3 | sed -e 's/_/ /g')
if [ "$STATES" == "*" -o $(echo "$STATES" | grep -c ":$STATE:") -ne 0 ]; then
local TOTAL=$(echo $CONTAINERS | wc -w)
local FOUND=$(echo $CONTAINERS | grep -o true | wc -l)
if [ $TOTAL -eq $FOUND ]; then
for PATTERN in $PATTERNS; do
if [[ $NAME =~ $PATTERN ]]; then
COUNT=$(expr $COUNT + 1)
break
fi
done
fi
fi
done
echo $COUNT
}
wait_for_pods() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=$1; shift
fi
local NAMESPACE=$1; shift
local EXPECT=$1; shift
local TYPE=$1; shift
local RETRY=$1; shift
local MESSAGE=$1; shift
local PATTERNS=$*
local STATES=":Running:"
if [ "$TYPE" == "not" ]; then
STATES="*"
fi
local HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
local ALL=$HAVE
if [ "$TYPE" == "only" ]; then
ALL=$(count_pods "all-namespaces" "*" ".*")
fi
COUNT=$(expr 300 / 15)
local WAIT_START=$(date +%s)
bspin $INDENT $MESSAGE
sspin $INDENT
if [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; then
while [ $HAVE -ne $EXPECT -o $ALL -ne $HAVE ]; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin $INDENT "$THEX"
doTimeout "waiting for PODs to start"
fi
sspin $INDENT
COUNT=$(expr $COUNT - 1)
if [ $COUNT -eq 0 ]; then
HAVE=$(count_pods $NAMESPACE "$STATES" $PATTERNS)
ALL=$HAVE
if [ "$TYPE" == "only" ]; then
ALL=$(count_pods "all-namespaces" "*" ".*")
fi
COUNT=$(expr 300 / 15)
fi
sleep .15
done
fi
espin $INDENT $VERIFIED
if [ $HAVE -ne $EXPECT ]; then
return 1
fi
return 0
}
port_forward() {
local NS=$1
local SVC=$2
local FROM_PORT=$3
local TO_PORT=$4
local TAG=$SVC-$NAME
(set -x; _TAG=$TAG bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n $NS service/$SVC $FROM_PORT:$TO_PORT; done" >>$LOG 2>&1 &) >>$LOG 2>&1
}
kill_port_forward() {
local TAG=$1-$NAME
local P_IDS=$(ps e -ww -A | grep "_TAG=$TAG" | grep -v grep | awk '{print $1}')
local PARENTS=
local KIDS=
local UNKNOWN=
if [ ! -z "$P_IDS" ]; then
for P_ID in $P_IDS; do
local PP_ID=$(ps -o ppid $P_ID | tail -n +2)
if [ ! -z "$PP_ID" ]; then
if [ $PP_ID -eq 1 ]; then
PARENTS="$PARENTS $P_ID"
else
KIDS="$KIDS $P_ID"
fi
else
UNKNOWN="$UNKNOWN $P_ID"
fi
done
(set -x; kill -9 $PARENTS $KIDS $UNKNOWN >>$LOG 2>&1) >>$LOG 2>&1
fi
}
if [ "$1" == "down" ]; then
echo "Tearing down voltha cluster $NAME"
LOG="down-$NAME.log"
echo $(date -u +"%Y%m%dT%H%M%SZ") >$LOG
if [ $WITH_ONOS == "yes" ]; then
bspin "Remove port-forwards: onos-ui-$NAME"
kill_port_forward onos-ui
sspin "Remove port-forwards: onos-ssh-$NAME$CEOL"
kill_port_forward onos-ssh
fi
sspin "Remove port-forwards: voltha-api-$NAME$CEOL"
kill_port_forward voltha-api
if [ $WITH_ETCD == "yes" -o $WITH_ETCD == "external" ]; then
sspin "Remove port-forwards: voltha-etcd-$NAME$CEOL"
kill_port_forward voltha-etcd-cluster-client
fi
if [ $WITH_KAFKA == "yes" ]; then
sspin "Remove port-forwards: voltha-kafka-$NAME$CEOL"
kill_port_forward voltha-kafka
fi
espin "$VERIFIED Remove port-forwards$CEOL"
if [ $DEPLOY_K8S == "yes" ]; then
if [ -x ./bin/kind ]; then
bspin "Delete Kubernetes Kind Cluster"
(set -x; ./bin/kind delete cluster --name voltha-$NAME >>$LOG 2>&1) >>$LOG 2>&1
espin $VERIFIED
else
espin "$NO_ENTRY Delete Kubernetes Kind Cluster: kind command not found"
fi
else
EXISTS=$(helm list -q)
EXPECT="voltha"
if [ $WITH_ONOS == yes ]; then
EXPECT+=" onos"
fi
if [ $WITH_RADIUS == "yes" ]; then
EXPECT+=" radius"
fi
if [ $WITH_BBSIM == "yes" ]; then
EXPECT+=" bbsim"
fi
if [ $WITH_OPEN_ADAPTERS == "yes" ]; then
EXPECT+=" open-olt open-onu"
fi
if [ $WITH_SIM_ADAPTERS == "yes" ]; then
EXPECT+=" sim"
fi
if [ $WITH_ETCD == "external" ]; then
EXPECT+=" etcd-operator etcd-cluster"
elif [ $WITH_ETCD == "yes" ]; then
EXPECT+=" etcd-operator"
fi
if [ $WITH_KAFKA == "external" ]; then
EXPECT+=" kafka"
fi
bspin "Remove Helm Deployments"
for i in $EXISTS; do
for j in $EXPECT; do
if [[ $i =~ $j ]]; then
sspin "Remove Helm Deployments: $i$CEOL"
(set -x; ./bin/helm delete --no-hooks --purge $i >>$LOG 2>&1) >>$LOG 2>&1
fi
done
done
espin "$VERIFIED Remove Helm Deployments$CEOL"
if [ "$WAIT_ON_DOWN" == "yes" ]; then
PODS="voltha-kafka.* voltha-ofagent.* voltha-rw-core.* voltha-etcd.*"
INFRA_PODS=
ADAPT_PODS=
SIM_PODS=
if [ $WITH_RADIUS == "yes" ]; then
PODS+=" radius.*"
fi
if [ $WITH_BBSIM == "yes" ]; then
SIM_PODS+=" bbsim.*"
fi
if [ $WITH_OPEN_ADAPTERS -o $WITH_SIM_ADAPTERS ]; then
ADAPT_PODS+=" adapter-*"
fi
if [ $WITH_ONOS == "yes" ]; then
INFRA_PODS+=" onos-.*"
fi
if [ $WITH_ETCD == "external" ]; then
INFRA_PODS+=" etcd-operator.* etcd-cluster.*"
elif [ $WITH_ETCD == "yes" ]; then
PODS+=" etcd-operator.*"
fi
if [ $WITH_KAFKA == "external" ]; then
INFRA_PODS+=" kafka.*"
fi
if [ ! -z "$SIM_PODS" ]; then
wait_for_pods "$BBSIM_NS" 0 "not" -1 "Waiting for BBSIM PODs to terminate" $SIM_PODS
fi
if [ ! -z "$INFRA_PODS" ]; then
wait_for_pods "$INFRA_NS" 0 "not" -1 "Waiting for infrastructure PODs to terminate" $INFRA_PODS
fi
if [ ! -z "$ADAPT_PODS" ]; then
wait_for_pods "$ADAPTER_NS" 0 "not" -1 "Waiting for adapter PODs to terminate" $ADAPT_PODS
fi
wait_for_pods "$VOLTHA_NS" 0 "not" -1 "Waiting for VOLTHA PODs to terminate" $PODS
fi
fi
exit
fi
if [ "$1" == "dump" ]; then
LOG="dump-$NAME.log"
TS=$(date -u +"%Y%m%dT%H%M%SZ")
if [ ! -z "$DUMP_FROM" ]; then
TS=$(echo $DUMP_FROM | sed -e 's/[:-]//g')
fi
WORK=$(mktemp -u -d)
DATA=$WORK/voltha-debug-dump-$NAME-$TS
mkdir -p $DATA
echo $TS > $LOG
echo -e "Capturing debug dump to voltha-debug-dump-$NAME-$TS.tgz"
bspin - "Copy install log"
if [ -f install-$NAME.log ]; then
(set -x; cp install-$NAME.log $DATA/install-$NAME.log) >>$LOG 2>&1
espin - $VERIFIED
else
espin - "$NO_ENTRY Copy install log: install-$NAME.log not found"
fi
bspin - "Dumping Kubernetes PODs"
(set -x; kubectl get --all-namespaces pods >> $DATA/all-pods.txt 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Dumping Kubernetes SERVICEs"
(set -x; kubectl get --all-namespaces svc >> $DATA/all-services.txt 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Dumping Kubernetes EVENTs"
(set -x; kubectl get --all-namespaces events >> $DATA/all-events.txt 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Dumping VOLTHA POD details"
PODS="$(kubectl -n $INFRA_NS get pod -o name | grep onos | sed -e 's/^/$INFRA_NS:/g') $(kubectl get -n $VOLTHA_NS pod -o name | sed -e 's/^/$VOLTHA_NS:/g')"
SINCE=
if [ ! -z "$DUMP_FROM" ]; then
SINCE="--since-time=$DUMP_FROM"
fi
for POD in $PODS; do
NS=$(echo $POD | cut -d: -f1)
POD=$(echo $POD | cut -d: -f2)
sspin - "Dumping VOLTHA POD details: $POD$CEOL"
mkdir -p $DATA/$POD
(set -x; kubectl describe -n $NS $POD >> $DATA/$POD/describe.txt 2>&1) >>$LOG 2>&1
sspin - "Dumping VOLTHA POD details: $POD"
(set -x; kubectl logs -n $NS --all-containers $SINCE --previous $LOG_ARGS $POD >> $DATA/$POD/logs-previous.txt 2>&1) >>$LOG 2>&1
sspin - "Dumping VOLTHA POD details: $POD"
(set -x; kubectl logs -n $NS --all-containers $SINCE $LOG_ARGS $POD >> $DATA/$POD/logs-current.txt 2>&1) >>$LOG 2>&1
sspin - "Dumping VOLTHA POD details: $POD"
done
espin - "$VERIFIED Dumping VOLTHA POD details$CEOL"
bspin - "Dumping ETCD"
if [ "$(which etcdctl) X" != " X" ]; then
(set -x; ETCDCTL_API=3 etcdctl --endpoints localhost:$VOLTHA_ETCD_PORT get --prefix service/voltha | hexdump -C >> $DATA/etcd.hex 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
espin - "$NO_ENTRY Dumping ETCD: etcdctl command not available"
fi
bspin - "Creating compressed TAR: voltha-debug-dump-$NAME-$TS.tgz"
(set -x; tar -C $WORK -zcf voltha-debug-dump-$NAME-$TS.tgz ./voltha-debug-dump-$NAME-$TS) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Cleanup"
(set -x; rm -rf $WORK) >>$LOG 2>&1
espin - $VERIFIED
bspin - "$(ls -l voltha-debug-dump-$NAME-$TS.tgz)"
espin - $VERIFIED
exit
fi
LOG="install-$NAME.log"
date > $LOG
echo "PORTS=$ONOS_API_PORT,$ONOS_SSH_PORT,$VOLTHA_API_PORT,$VOLTHA_SSH_PORT,$VOLTHA_ETCD_PORT" >> $LOG
# Output install options to log
echo "OPTIONS" >> $LOG
for O in $ALL_OPTIONS; do
VAL=$(eval echo \$$O)
if [ ! -z "$VAL" ]; then
printf " %-30s = %s\n" $O $VAL >> $LOG
fi
done
helm_install() {
local INDENT=
if [ "$1" == "-" ]; then
INDENT=$1; shift
fi
local NAMESPACE=$1; shift
local INAME=$1; shift
local CHART=$1; shift
local CHART_VERSION=$1; shift
local MESSAGE=$*
if [ "$CHART_VERSION X" != " X" -a "$CHART_VERSION" != "latest" ]; then
CHART_VERSION="--version $CHART_VERSION"
else
CHART_VERSION=
fi
local CHART_ARGS=
if [ -r "${INAME}-values.yaml" ]; then
CHART_ARGS="-f ${INAME}-values.yaml"
fi
local WAIT_START=$(date +%s)
COUNT=$(expr 300 / 15)
bspin $INDENT $MESSAGE
if [ $HELM_USE_UPGRADE == "yes" ]; then
_HELM_COMMAND="upgrade --install"
_HELM_ARGS="$INAME"
else
_HELM_COMMAND="install"
_HELM_ARGS="--name $INAME"
fi
(set -x; helm $_HELM_COMMAND -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE $_HELM_ARGS $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
SUCCESS=$?
while [ $SUCCESS -ne 0 ]; do
if [ $(($(date +%s) - $WAIT_START)) -gt $TIMEOUT_SECONDS ]; then
espin "$THEX"
doTimeout "waiting for helm install $CHART"
fi
sspin $INDENT
COUNT=$(expr $COUNT - 1)
if [ $COUNT -eq 0 ]; then
if [ $HELM_USE_UPGRADE == "no" ]; then
(set -x; helm delete --purge $INAME >>$LOG 2>&1) >>$LOG 2>&1
fi
(set -x; helm $_HELM_COMMAND -f $NAME-values.yaml $CHART_ARGS $INTERNAL_EXTRA_HELM_INSTALL_ARGS $EXTRA_HELM_INSTALL_ARGS --set defaults.log_level=$VOLTHA_LOG_LEVEL --namespace $NAMESPACE $_HELM_ARGS $CHART_VERSION $EXTRA_HELM_FLAGS $CHART >>$LOG 2>&1) >>$LOG 2>&1
SUCCESS=$?
COUNT=$(expr 300 / 15)
fi
sleep .15
done
espin $INDENT $VERIFIED
}
echo "INSTALL TYPE: $TYPE" >> $LOG
bspin "Verify GOPATH"
export GOPATH=$(pwd)
mkdir -p $GOPATH/bin
espin $VERIFIED
STIME=$(date +%s)
if [ "$INSTALL_KUBECTL" == "no" ]; then
bspin "Skip kubectl install"
espin $NO_ENTRY
else
bspin "Verify kubectl $HELM"
if [ -x $GOPATH/bin/kubectl ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "Download and install Kubernetes/kubectl $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/kubectl -sSL https://storage.googleapis.com/kubernetes-release/release/$(curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt)/bin/$HOSTOS/$HOSTARCH/kubectl >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/kubectl >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
if [ "$DEPLOY_K8S" == "no" ]; then
bspin "Skip Kubernetes/Kind Deployment"
espin $NO_ENTRY
else
bspin "Verify Kubernetes/Kind $HELM"
IS_INSTALLED=0
OP_TYPE="install"
if [ -x $GOPATH/bin/kind ]; then
OP_TYPE="upgrade"
if [ $($GOPATH/bin/kind --version | grep -c $KIND_VERSION) -eq 1 ]; then
IS_INSTALLED=1
espin $VERIFIED
fi
fi
if [ $IS_INSTALLED -eq 0 ]; then
espin $NOT_VERIFIED
bspin - "Download and $OP_TYPE Kubernetes/kind $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/kind -sSL https://github.com/kubernetes-sigs/kind/releases/download/$KIND_VERSION/kind-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/kind >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
if [ "$INSTALL_HELM" == "no" ]; then
bspin "Skip Helm Install"
espin $NO_ENTRY
else
bspin "Verify Helm $HELM"
HELM_UPGRADE=0
HELM_UPGRADE_DESC="install"
if [ -x $GOPATH/bin/helm ]; then
HAVE_VER=$($GOPATH/bin/helm version -c --template '{{.Client.SemVer}}')
HELM_UP_DOWN=$(echo -e "$HAVE_VER\n$HELM_VERSION" | sort -V | head -1)
if [ $HAVE_VER != $HELM_VERSION ]; then
if [ $HELM_UP_DOWN == $HELM_VERSION ]; then
HELM_UPGRADE_DESC="downgrade"
else
HELM_UPGRADE_DESC="upgrade"
fi
HELM_UPGRADE=1
else
espin $VERIFIED
fi
else
HELM_UPGRADE=1
fi
if [ $HELM_UPGRADE -ne 0 ]; then
espin $NOT_VERIFIED
bspin - "Download and $HELM_UPGRADE_DESC Helm $DOWNLOAD"
(set -x; curl -sSL https://git.io/get_helm.sh | DESIRED_VERSION=$HELM_VERSION USE_SUDO=false HELM_INSTALL_DIR=$GOPATH/bin bash >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
bspin "Verify voltctl $HIGH_VOLTAGE"
VOK=0
VMESSAGE="install"
export VC_VERSION="$VOLTCTL_VERSION"
if [ "$VC_VERSION" == "latest" ]; then
export VC_VERSION=$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')
fi
if [ -x $GOPATH/bin/voltctl ]; then
VHAVE=$($GOPATH/bin/voltctl version --clientonly -o json | jq -r .version)
if [ $? -eq 0 -a "$VHAVE" == "$VC_VERSION" ]; then
VOK=1
espin $VERIFIED
else
VCHECK=$(echo -e "$VHAVE\n$VC_VERSION" | sort -V | head -1)
if [ "$VCHECK" == "$VHAVE" ]; then
VMESSAGE="upgrade"
else
VMESSAGE="downgrade"
fi
fi
fi
if [ $VOK -eq 0 ]; then
espin $NOT_VERIFIED
bspin - "Download and $VMESSAGE voltctl $DOWNLOAD"
(set -x; curl -o $GOPATH/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v$VC_VERSION/voltctl-$VC_VERSION-$HOSTOS-$HOSTARCH >>$LOG 2>&1) >>$LOG 2>&1
(set -x; chmod 755 $GOPATH/bin/voltctl >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
bspin "Verify command PATH"
export PATH=$GOPATH/bin:$PATH
espin $VERIFIED
STIME=$(date +%s)
if [ "$DEPLOY_K8S" == "yes" ]; then
HAVE=$(kind get clusters | grep -c voltha-$NAME)
bspin "Verify Kubernetes/Kind Cluster"
sspin
if [ $HAVE -eq 0 ]; then
espin $NOT_VERIFIED
bspin - "Verify cluster configuration"
if [ ! -r ./$NAME-cluster.cfg ]; then
espin - $NOT_VERIFIED
bspin - "Download cluster configuration: $TYPE-cluster.cfg to $NAME-cluster.cfg $DOWNLOAD"
ERR_OUT=$(mktemp)
(set -x; curl --fail -o ./$NAME-cluster.cfg -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-cluster.cfg >>$LOG 2>>$ERR_OUT) >>$LOG 2>&1
if [ $? -ne 0 ]; then
espin - $THEX
echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-cluster.cfg${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
echo "ERROR: $(cat $ERR_OUT)" >>$LOG
rm -rf $ERR_OUT ./$NAME-cluster.cfg
exit 1
fi
rm -rf $ERR_OUT
else
espin - $VERIFIED
fi
kind create cluster --name voltha-$NAME --config $NAME-cluster.cfg
else
espin $VERIFIED
fi
export KUBECONFIG="$(kind get kubeconfig-path --name="voltha-$NAME")"
P="coredns-.* \
etcd-voltha-$NAME-control-plane \
kindnet-.* \
kube-apiserver-voltha-$NAME-control-plane \
kube-controller-manager-voltha-$NAME-control-plane \
kube-proxy-.* \
kube-scheduler-voltha-$NAME-control-plane"
EXPECT=$(test "$TYPE" == "minimal" && echo "12" || echo "14")
wait_for_pods - "kube-system" $EXPECT "includes" -1 "Waiting for system PODs to start" $P
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
COUNT=$(count_pods "kube-system" ":Running:" "tiller-deploy-.*")
bspin "Verify Helm"
if [ $COUNT -ne 1 ]; then
espin $NOT_VERIFIED
echo -e "Configuring Helm $GEAR"
if [ "$INSTALL_HELM" == "no" ]; then
bspin - "Skip Helm/Tiller Initialization"
espin - $NO_ENTRY
else
bspin - "Initialize Helm"
(set -x; helm init --upgrade >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
fi
bspin - "Add Google Incubator repository to Helm"
(set -x; helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
# HACK (sort-of) - the config for tiller is about to be patched, which will
# cause the tiller pod to be recreated. This can sometimes cause a timing
# issue with the "wait_for_pods" call on tiller as it may incorrectly
# identify the running/ready tiller pod that is soon to be terminated as
# what it is waiting for. To avoid this issue we do a clean scale down and
# scale up of the pod so the script controlls when it should be expecting
# things
(set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=0 >>$LOG 2>&1) >>$LOG 2>&1
bspin - "Add Google Stable repository to Helm"
(set -x; helm repo add stable https://kubernetes-charts.storage.googleapis.com >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Add ONF repository to Helm"
(set -x; helm repo add onf https://charts.opencord.org >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Update Helm repository cache"
(set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
# Create and k8s service account so that Helm can create pods
bspin - "Create Tiller ServiceAccount"
(set -x; kubectl create serviceaccount --namespace kube-system tiller >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Create Tiller ClusterRoleBinding"
(set -x; kubectl create clusterrolebinding tiller-cluster-rule --clusterrole=cluster-admin --serviceaccount=kube-system:tiller >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
bspin - "Update Tiller Manifest"
(set -x; kubectl patch deploy --namespace kube-system tiller-deploy -p '{"spec":{"template":{"spec":{"serviceAccount":"tiller"}}}}' >>$LOG 2>&1) >>$LOG 2>&1
# HACK (sort-of) - part to, spin it back up
(set -x; kubectl -n kube-system scale deploy tiller-deploy --replicas=1 >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
if [ $(helm version -s --template '{{.Server.SemVer}}') != $HELM_VERSION ]; then
espin $NOT_VERIFIED
bspin - "Sync Tiller server version with helm client"
(set -x; helm init --upgrade --force-upgrade --wait >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
else
espin $VERIFIED
fi
if [ "$UPDATE_HELM_REPOS" == "yes" ]; then
bspin - "Update Helm repository cache"
(set -x; helm repo update >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
wait_for_pods - "kube-system" 1 "includes" -1 "Waiting for Tiller POD to start" "tiller-deploy-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
bspin "Verify Helm values file: $NAME-values.yaml"
if [ ! -r "./$NAME-values.yaml" ]; then
espin $NOT_VERIFIED
bspin - "Download Helm values file: $TYPE-values.yaml to $NAME-values.yaml $DOWNLOAD"
ERR_OUT=$(mktemp)
(set -x; curl --fail -o ./$NAME-values.yaml -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$TYPE-values.yaml >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
if [ $? -ne 0 ]; then
espin - $THEX
echo -e "${RED}${BOLD}${ERROR}ERROR: $NAME-values.yaml${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
echo "ERROR: $(cat $ERR_OUT)" >>$LOG
rm -rf $ERR_OUT ./$NAME-values.yaml
exit 1
fi
rm -rf $ERR_OUT
espin - $VERIFIED
else
espin $VERIFIED
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
STIME=$(date +%s)
bspin "Verify or download chart specific values files $DOWNLOAD"
VALUES_FILES="monkey-values.yaml"
ERR_OUT=$(mktemp)
for i in $VALUES_FILES; do
if [ ! -r ./$i ]; then
(set -x; curl --fail -o ./$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
if [ $? -ne 0 ]; then
espin $THEX
echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
echo "ERROR: $i - $(cat $ERR_OUT)" >>$LOG
rm -rf $ERR_OUT ./$i
exit 1
fi
rm -rf $ERR_OUT
fi
done
rm -rf $ERR_OUT
espin $VERIFIED
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
if [ "$WITH_CHAOS" == "yes" ]; then
bspin "Verify or clone kube-monkey helm chart $DOWNLOAD"
if [ -r ./kube-monkey ]; then
espin $VERIFIED
else
espin $NOT_VERIFIED
bspin - "GIT clone kube-monkey"
(set -x; git clone https://github.com/asobti/kube-monkey kube-monkey >>$LOG 2>&1) >>$LOG 2>&1
espin - $VERIFIED
fi
fi
if [ "$JUST_K8S" == "yes" ]; then
echo "Environment deployed, not deploying VOLTHA artifacts as requested. Good bye."
echo ""
echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
echo "tools required by VOLTHA in your command path. " | tee -a $LOG
echo "" | tee -a $LOG
echo -en $BOLD
if [ $DEPLOY_K8S == "yes" ]; then
echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
fi
echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
echo -en $NORMAL
echo "" | tee -a $LOG
echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
exit 0
fi
if [ $WITH_ETCD != "yes" -a $WITH_ETCD != "external" ]; then
bspin "Skip ETCD Operator Deployment"
espin $NO_ENTRY
else
STIME=$(date +%s)
NS=$VOLTHA_NS
if [ $WITH_ETCD == "external" ]; then
NS=$INFRA_NS
fi
bspin "Verify ETCD Operator $OLD_KEY"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $NS "^etcd-operator\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
helm_install - $NS etcd-operator stable/etcd-operator latest "$_HELM_DESC ETCD Operator"
else
espin $VERIFIED
fi
EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
wait_for_pods - "$NS" $EXPECT "includes" -1 "Waiting for ETCD Operator to start" "etcd-operator-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
STIME=$(date +%s)
if [ $WITH_ONOS == "yes" ]; then
bspin "Verify ONOS installed $BIRD"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $INFRA_NS "^onos\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
EXTRA_HELM_FLAGS="$SET_TAG $EXTRA_HELM_FLAGS" helm_install - $INFRA_NS onos $ONOS_CHART $ONOS_CHART_VERSION "$_HELM_DESC ONOS"
else
espin $VERIFIED
fi
wait_for_pods - "$INFRA_NS" 1 "includes" -1 "Waiting for ONOS to start" "onos-.*"
if [ $WITH_PORT_FORWARDS == "yes" ]; then
bspin - "Forward ONOS API port $FORWARD"
kill_port_forward onos-ui
port_forward $INFRA_NS onos-ui $ONOS_API_PORT 8181
espin - $VERIFIED
bspin - "Forward ONOS SSH port $FORWARD"
kill_port_forward onos-ssh
port_forward $INFRA_NS onos-ssh $ONOS_SSH_PORT 8101
espin - $VERIFIED
_ONOS_API_EP="127.0.0.1:$ONOS_API_PORT"
else
_ONOS_API_EP=$(get_service_ep $INFRA_NS onos-ui)
fi
bspin - "Verify or download ONOS configuration support files $DOWNLOAD"
ONOS_FILES="olt-onos-enableExtraneousRules.json onos-aaa.json \
onos-dhcpl2relay.json onos-sadis-sample.json"
(set -x; mkdir -p ./onos-files >>$LOG 2>&1) >>$LOG 2>&1
ERR_OUT=$(mktemp)
for i in $ONOS_FILES; do
if [ ! -r ./onos-files/$i ]; then
(set -x; curl --fail -o ./onos-files/$i -sSL https://raw.githubusercontent.com/ciena/kind-voltha/$VK_RELEASE/onos-files/$i >>$LOG 2>$ERR_OUT) >>$LOG 2>&1
if [ $? -ne 0 ]; then
espin - $THEX
echo -e "${RED}${BOLD}${ERROR}ERROR: $i${NORMAL}${RED} - $(cat $ERR_OUT)${NORMAL}"
echo "ERROR: $(cat $ERR_OUT)" >>$LOG
rm -rf $ERR_OUT ./onos-files/$i
exit 1
fi
rm -rf $ERR_OUT
fi
done
rm -rf $ERR_OUT
espin - $VERIFIED
if [ $INSTALL_ONOS_APPS == "yes" ]; then
bspin - "Installing custom ONOS applications"
if [ -x onos-files/onos-apps -a $(ls -1 onos-files/onos-apps/*.oar 2>/dev/null | wc -l) -gt 0 ]; then
for OAR in $(ls -1 onos-files/onos-apps/*.oar); do
sspin - "Installing custom ONOS applications - $OAR$CEOL"
override_onos_app $OAR
done
espin - "$VERIFIED Installing custom ONOS applications$CEOL"
else
espin - "$NOT_VERIFIED Installing custom ONOS applications - None Found"
fi
fi
if [ $WITH_KAFKA != "no" ]; then
check_onos_app_active org.opencord.kafka
_HOST=voltha-kafka.$INFRA_NS.svc.cluster.local
_PORT=9092
if [ $WITH_KAFKA == "yes" ]; then
_HOST=voltha-kafka.$VOLTHA_NS.svc.cluster.local
_PORT=9092
elif [ $WITH_KAFKA == "external" ]; then
_HOST=kafka.$INFRA_NS.svc.cluster.local
_PORT=9092
else
_HOST=$(echo $WITH_KAFKA | cut -d: -f1)
_PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
_PORT=${_PORT:-9092}
fi
push_onos_config "json" "Push ONOS Kafka Configuration" "network/configuration/apps/org.opencord.kafka" \
"$(echo $(cat <<EOJ
{
"kafka": {
"bootstrapServers": "$_HOST:$_PORT"
}
}
EOJ
) | tr -d '[:space:]')"
fi
check_onos_app_active org.opencord.dhcpl2relay
push_onos_config "file" "Push ONOS DHCP L2 Relay Configuration" "network/configuration/apps/org.opencord.dhcpl2relay" "onos-files/onos-dhcpl2relay.json"
check_onos_app_active org.opencord.olt
# FIXME use WITH_DHCP and WITH_EAPOL flags to configre OLT App
# Default value for "enableEapol" is true in OLT App
if [ $WITH_EAPOL == "yes" ]; then
push_onos_config "json" "Enable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":true}'
elif [ $WITH_EAPOL == "no" ]; then
push_onos_config "json" "Disable VOLTHA ONOS EAPOL provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableEapol":false}'
fi
# Default value for "enableDhcpOnProvisioning" is false and for "enableDhcpV4" is true in OLT App
if [ $WITH_DHCP == "yes" ]; then
push_onos_config "json" "Enable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":true,"enableDhcpV4":true}'
elif [ $WITH_DHCP == "no" ]; then
push_onos_config "json" "Disable VOLTHA ONOS DHCP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableDhcpOnProvisioning":false,"enableDhcpV4":false}'
fi
# Default value for "enableIgmpOnProvisioning" is false in OLT App
if [ $WITH_IGMP == "yes" ]; then
push_onos_config "json" "Enable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":true}'
elif [ $WITH_IGMP == "no" ]; then
push_onos_config "json" "Disable VOLTHA ONOS IGMP provisioning" "configuration/org.opencord.olt.impl.OltFlowService" '{"enableIgmpOnProvisioning":false}'
fi
if [ $ENABLE_ONOS_EXTRANEOUS_RULES == "yes" ]; then
push_onos_config "file" "Enabling extraneous rules for ONOS" "configuration/org.onosproject.net.flow.impl.FlowRuleManager" "onos-files/olt-onos-enableExtraneousRules.json"
fi
if [ $(echo ":yes:file:" | grep -c ":$CONFIG_SADIS:") -eq 1 ]; then
check_onos_app_active org.opencord.sadis
push_onos_config "file" "[optional] Push ONOS SADIS Configuration: $SADIS_CFG" "network/configuration/apps/org.opencord.sadis" "$SADIS_CFG"
elif [ "$CONFIG_SADIS" == "bbsim" ]; then
push_onos_config "json" \
"[optional] Push ONOS configuration for BBSIM SADIS servers" \
"network/configuration/apps/org.opencord.sadis" \
"$(echo $(cat <<EOJ
{
"sadis": {
"integration": {
"url": "http://bbsim.$BBSIM_NS.svc.cluster.local:50074/v2/subscribers/%s",
"cache": {
"enabled": true,
"maxsize": 50,
"ttl": "PT1m"
}
}
},
"bandwidthprofile": {
"integration": {
"url": "http://bbsim.$BBSIM_NS.svc.cluster.local:50074/v2/bandwidthprofiles/%s",
"cache": {
"enabled": true,
"maxsize": 50,
"ttl": "PT1m"
}
}
}
}
EOJ
) | tr -d '[:space:]')"
elif [ "$CONFIG_SADIS" == "url" ]; then
push_onos_config "json" \
"[optional] Push ONOS configuration for custom SADIS and Bandwidth Profile servers" \
"network/configuration/apps/org.opencord.sadis" \
"$(echo $(cat <<EOJ
{
"sadis": {
"integration": {
"url": "$SADIS_SUBSCRIBERS",
"cache": {
"enabled": true,
"maxsize": 50,
"ttl": "PT1m"
}
}
},
"bandwidthprofile": {
"integration": {
"url": "$SADIS_BANDWIDTH_PROFILES",
"cache": {
"enabled": true,
"maxsize": 50,
"ttl": "PT1m"
}
}
}
}
EOJ
) | tr -d '[:space:]')"
fi
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
if [ $WITH_ETCD == "external" ]; then
STIME=$(date +%s)
bspin "Verify external ETCD cluster $OLD_KEY"
EXPECT=$(test "$TYPE" == "minimal" && echo "1" || echo "3")
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $INFRA_NS "^etcd-cluster\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
INTERNAL_EXTRA_HELM_INSTALL_ARGS+="--set clusterName=etcd-cluster --set autoCompactionRetention=1 --set clusterSize=$EXPECT"
helm_install - $INFRA_NS etcd-cluster onf/voltha-etcd-cluster latest "$_HELM_DESC external ETCD cluster"
else
espin $VERIFIED
fi
wait_for_pods - "$INFRA_NS" $EXPECT "includes" -1 "Waiting for ETCD cluster to start" "etcd-cluster-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
if [ $WITH_KAFKA == "external" ]; then
_TMP=$(mktemp -u)
_COUNT=$(test $TYPE == "minimal" && echo "1" || echo "3")
cat << EOC > $_TMP
configurationOverrides:
"default.replication.factor": $_COUNT
"offsets.topic.replication.factor": $_COUNT
"log.retention.hours": 4
"log.message.timestamp.type": "LogAppendTime"
persistence:
enabled: false
zookeeper:
replicaCount: 1
persistence:
enabled: false
replicas: $_COUNT
EOC
STIME=$(date +%s)
bspin "Verify external Kafka cluster $OLD_KEY"
EXPECT=$(test "$TYPE" == "minimal" && echo "2" || echo "4")
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $INFRA_NS "^kafka\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" -f $_TMP"
helm_install - $INFRA_NS kafka incubator/kafka latest "$_HELM_DESC external Kafka cluster"
else
espin $VERIFIED
fi
# DKB
wait_for_pods - "$INFRA_NS" $EXPECT "includes" -1 "Waiting for Kafka cluster to start" "kafka-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
rm -rf $_TMP
fi
STIME=$(date +%s)
EXPECT=1
if [ "$ONLY_ONE" == "yes" ]; then
EXPECT=$((EXPECT+1))
INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set therecanbeonlyone=true"
else
EXPECT=$((EXPECT+2))
fi
case $WITH_ETCD in
no)
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_etcd_cluster=false"
;;
yes)
_HOST="voltha-etcd-cluster-client.$VOLTHA_NS.svc.cluster.local"
_PORT=2379
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
EXPECT=$((EXPECT+$(test "$TYPE" == "minimal" && echo "1" || echo "3")))
;;
external)
_HOST="etcd-cluster-client.$INFRA_NS.svc.cluster.local"
_PORT=2379
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_etcd_cluster=false --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
;;
*)
_HOST=$(echo $WITH_ETCD | cut -d: -f1)
_PORT=$(echo $WITH_ETCD | cut -s -d: -f2)
_PORT=${_PORT:-2379}
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_etcd_cluster=false --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
;;
esac
case $WITH_KAFKA in
no)
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_kafka_cluster=false"
;;
yes)
_HOST=voltha-kafka.$VOLTHA_NS.svc.cluster.local
_PORT=9092
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
EXPECT=$((EXPECT+$(test "$TYPE" == "minimal" && echo "2" || echo "4")))
;;
external)
_HOST=kafka.$INFRA_NS.svc.cluster.local
_PORT=9092
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_kafka_cluster=false --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
;;
*)
_HOST=$(echo $WITH_KAFKA | cut -d: -f1)
_PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
_PORT=${_PORT:-9092}
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set private_kafka_cluster=false --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
;;
esac
if [ $WITH_ONOS == "yes" ]; then
_HOST=onos-openflow.$INFRA_NS.svc.cluster.local
_PORT=6653
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.controller.service=$_HOST --set services.controller.port=$_PORT"
elif [ $WITH_ONOS != "no" ]; then
_HOST=$(echo $WITH_ONOS | cut -d: -f1)
_PORT=$(echo $WITH_ONOS | cut -s -d: -f2)
_PORT=${_PORT:-6653}
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.controller.service=$_HOST --set services.controller.port=$_PORT"
fi
bspin "Verify VOLTHA installed $HIGH_VOLTAGE"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $VOLTHA_NS "^voltha\$" | wc -l) -ne 1 ]; then
espin $NOT_VERIFIED
helm_install - $VOLTHA_NS voltha $VOLTHA_CHART $VOLTHA_CHART_VERSION "$_HELM_DESC VOLTHA Core"
else
espin $VERIFIED
fi
INTERNAL_EXTRA_HELM_INSTALL_ARGS=
VOLTHA="voltha-ofagent-.* \
rw-core.* \
voltha-etcd-cluster-.* \
voltha-kafka-.* \
voltha-zookeeper-.*"
wait_for_pods - "$VOLTHA_NS" $EXPECT "includes" -1 "Waiting for VOLTHA Core to start" $VOLTHA
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
if [ "$WITH_ADAPTERS" == "yes" ]; then
STIME=$(date +%s)
EXPECT=0
if [ $WITH_ETCD == "yes" ]; then
_HOST=voltha-etcd-cluster-client.$VOLTHA_NS.svc.cluster.local
_PORT=2379
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
elif [ $WITH_ETCD == "external" ]; then
_HOST=etcd-cluster-client.$INFRA_NS.svc.cluster.local
_PORT=2379
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
elif [ $WITH_ETCD != "no" ]; then
_HOST=$(echo $WITH_ETCD | cut -d: -f1)
_PORT=$(echo $WITH_ETCD | cut -s -d: -f2)
_PORT=${_PORT:-2379}
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set services.etcd.service=$_HOST --set services.etcd.port=$_PORT"
fi
if [ $WITH_KAFKA == "yes" ]; then
_HOST=voltha-kafka.$VOLTHA_NS.svc.cluster.local
_PORT=9092
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
elif [ $WITH_KAFKA == "external" ]; then
_HOST=kafka.$INFRA_NS.svc.cluster.local
_PORT=9092
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
elif [ $WITH_KAFKA != "no" ]; then
_HOST=$(echo $WITH_KAFKA | cut -d: -f1)
_PORT=$(echo $WITH_KAFKA | cut -s -d: -f2)
_PORT=${_PORT:-9092}
INTERNAL_EXTRA_HELM_INSTALL_ARGS+=" --set kafka_broker=$_HOST:$_PORT --set services.kafka.adapter.service=$_HOST --set services.kafka.adapter.port=$_PORT --set services.kafka.cluster.service=$_HOST --set services.kafka.cluster.port=$_PORT"
fi
echo -e "Verify Adapters $PLUG"
if [ "$WITH_SIM_ADAPTERS" == "yes" ]; then
bspin - "Verify Simulated Adapters installed"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $ADAPTER_NS "^sim\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - $ADAPTER_NS sim $VOLTHA_ADAPTER_SIM_CHART $VOLTHA_ADAPTER_SIM_CHART_VERSION "$_HELM_DESC Simulated Adapters"
else
espin - $VERIFIED
fi
EXPECT=$(expr $EXPECT + 2)
fi
if [ "$WITH_OPEN_ADAPTERS" == "yes" ]; then
bspin - "Verify OpenOLT Adapter installed"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $ADAPTER_NS "^open-olt\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - $ADAPTER_NS open-olt $VOLTHA_ADAPTER_OPEN_OLT_CHART $VOLTHA_ADAPTER_OPEN_OLT_CHART_VERSION "$_HELM_DESC OpenOLT Adapter"
else
espin - $VERIFIED
fi
bspin - "Verify OpenONU Adapter installed"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $ADAPTER_NS "^open-onu\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - $ADAPTER_NS open-onu $VOLTHA_ADAPTER_OPEN_ONU_CHART $VOLTHA_ADAPTER_OPEN_ONU_CHART_VERSION "$_HELM_DESC OpenONU Adapter"
else
espin - $VERIFIED
fi
EXPECT=$(expr $EXPECT + 2)
fi
INTERNAL_EXTRA_HELM_INSTALL_ARGS=
ADAPTERS="adapter-.*"
wait_for_pods - "$ADAPTER_NS " $EXPECT "includes" -1 "Waiting for adapters to start" $ADAPTERS
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
if [ $WITH_BBSIM == "yes" ]; then
STIME=$(date +%s)
echo -e "Verify BBSIM $PLUG"
bspin - "Verify BBSIM Installed"
for instance in $(seq 0 $(($NUM_OF_BBSIM-1))); do
if [ $instance -eq 0 ]; then
instance_num=""
else
instance_num=$instance
fi
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $BBSIM_NS "^bbsim${instance_num}\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
S_TAG=$((900+$instance))
INTERNAL_EXTRA_HELM_INSTALL_ARGS="--set olt_id=$instance,s_tag=$S_TAG"
helm_install - $BBSIM_NS bbsim${instance_num} $VOLTHA_BBSIM_CHART $VOLTHA_BBSIM_CHART_VERSION "$_HELM_DESC BBSIM${instance_num}"
INTERNAL_EXTRA_HELM_INSTALL_ARGS=
else
espin - $VERIFIED
fi
done
wait_for_pods - "$BBSIM_NS" $NUM_OF_BBSIM "includes" -1 "Waiting for BBSIM to start" "bbsim*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
if [ $WITH_RADIUS == "yes" ]; then
STIME=$(date +%s)
echo -e "Verify RADIUS $LOCK"
bspin - "Verify RADIUS Installed"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace $INFRA_NS "^radius\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - $INFRA_NS radius onf/freeradius latest "$_HELM_DESC RADIUS"
else
espin - $VERIFIED
fi
wait_for_pods - "$INFRA_NS" 1 "includes" -1 "Waiting for RADIUS to start" "radius-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
if [ $WITH_PORT_FORWARDS == "yes" ]; then
STIME=$(date +%s)
bspin - "Forward VOLTHA API port $FORWARD"
kill_port_forward voltha-api
port_forward $VOLTHA_NS voltha-api $VOLTHA_API_PORT 55555
espin - $VERIFIED
if [ $WITH_ETCD == "yes" -o $WITH_ETCD == "external" ]; then
_NS=$(test $WITH_ETCD == "yes" && echo $VOLTHA_NS || echo $INFRA_NS)
bspin - "Forward VOLTHA ETCD port $FORWARD"
kill_port_forward voltha-etcd-cluster-client
port_forward $_NS voltha-etcd-cluster-client $VOLTHA_ETCD_PORT 2379
espin - $VERIFIED
fi
if [ $WITH_KAFKA == "yes" -o $WITH_KAFKA == "external" ]; then
_NS=$(test $WITH_ETCD == "yes" && echo $VOLTHA_NS || echo $INFRA_NS)
bspin - "Forward VOLTHA Kafka port $FORWARD"
kill_port_forward voltha-kafka
port_forward $_NS voltha-kafka $VOLTHA_KAFKA_PORT 9092
espin - $VERIFIED
fi
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
if [ $WITH_ONOS == "yes" -a $WITH_RADIUS != "no" ]; then
_HOST=radius.$INFRA_NS.svc.cluster.local
_PORT=1812
if [ $WITH_RADIUS != "yes" ]; then
_HOST=$(echo $WITH_RADIUS | cut -d: -f1)
_PORT=$(echo $WITH_RADIUS | cut -s -d: -f2)
_PORT=${_PORT:-1812}
fi
bspin "Configure ONOS RADIUS Connection $GEAR"
(set -x; cat onos-files/onos-aaa.json | sed -e "s/:RADIUS_SVC:/$_HOST/g" -e "s/:RADIUS_PORT:/$_PORT/" | curl --fail -sSL --user karaf:karaf -X POST http://$_ONOS_API_EP/onos/v1/network/configuration/apps/org.opencord.aaa -H Content-type:application/json -d@- >>$LOG 2>&1) >>$LOG 2>&1
espin $VERIFIED
fi
if [ "$WITH_CHAOS" == "yes" ]; then
STIME=$(date +%s)
echo -e "Verify kube-monkey $LOCK"
bspin - "Verify kube-monkey Installed"
if [ $HELM_USE_UPGRADE == "yes" -o $(helm list --deployed --short --namespace kube-monkey "^monkey\$" | wc -l) -ne 1 ]; then
espin - $NOT_VERIFIED
helm_install - kube-monkey monkey ./kube-monkey/helm/kubemonkey latest "$_HELM_DESC Chaos Monkey"
else
espin - $VERIFIED
fi
wait_for_pods - "kube-monkey" 1 "includes" -1 "Waiting for Chaos to start" "monkey-.*"
if [ "$WITH_TIMINGS" == "yes" ]; then
printtime $(expr $(date +%s) - $STIME)
fi
fi
bspin "Create voltctl configuration file"
(set -x; mkdir -p $HOME/.volt >>$LOG 2>&1) >>$LOG 2>&1
MIN_VC_VERSION=$(echo -e "1.0.15\n$VC_VERSION" | sort -V | head -1)
if [ $WITH_PORT_FORWARDS == "yes" ]; then
KAFKA_FLAG="-k localhost:$VOLTHA_KAFKA_PORT"
SERVER_FLAG="-s localhost:$VOLTHA_API_PORT"
ETCD_FLAG=
if [ "$MIN_VC_VERSION" == "1.0.15" ]; then
ETCD_FLAG="-e localhost:$VOLTHA_ETCD_PORT"
fi
else
KAFKA_FLAG="-k $(get_service_ep voltha voltha-kafka)"
SERVER_FLAG="-s $(get_service_ep $VOLTHA_NS voltha-api)"
ETCD_FLAG=
if [ "$MIN_VC_VERSION" == "1.0.15" ]; then
ETCD_FLAG="-e $(get_service_ep voltha voltha-etcd-client)"
fi
fi
(set -x; voltctl -a v3 $KAFKA_FLAG $SERVER_FLAG $ETCD_FLAG config > $HOME/.volt/config-$NAME 2>>$LOG) >>$LOG 2>&1
espin $VERIFIED
if [ ! -f "$NAME-env.sh" ]; then
touch $NAME-env.sh
fi
for O in $ALL_OPTIONS; do
VAL=$(eval echo \$$O)
if [ ! -z "$VAL" -a $(grep -c "^export $O=" $NAME-env.sh) -eq 0 ]; then
echo "export $O=\"$(eval echo \$$O)\"" >> $NAME-env.sh
fi
done
if [ $DEPLOY_K8S == "yes" -a $(grep -c "^export KUBECONFIG=" $NAME-env.sh) -eq 0 ]; then
echo "export KUBECONFIG=\"$(./bin/kind get kubeconfig-path --name=voltha-$NAME)\"" >> $NAME-env.sh
fi
if [ $(grep -c "^export VOLTCONFIG=" $NAME-env.sh) -eq 0 ]; then
echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" >> $NAME-env.sh
fi
if [ $(grep -c "^export PATH=" $NAME-env.sh) -eq 0 ]; then
echo "export PATH=\"$GOPATH/bin:\$PATH\"" >> $NAME-env.sh
fi
echo ""
echo "Please issue the following commands in your terminal to ensure that you" | tee -a $LOG
echo "are accessing the correct Kubernetes/Kind cluster as well as have the " | tee -a $LOG
echo "tools required by VOLTHA in your command path. " | tee -a $LOG
echo "" | tee -a $LOG
echo -en $BOLD
if [ $DEPLOY_K8S == "yes" ]; then
echo "export KUBECONFIG=\"\$(./bin/kind get kubeconfig-path --name=\"voltha-$NAME\")\"" | tee -a $LOG
fi
echo "export VOLTCONFIG=\"$HOME/.volt/config-$NAME\"" | tee -a $LOG
echo "export PATH=$GOPATH/bin:\$PATH" | tee -a $LOG
echo -en $NORMAL
echo "" | tee -a $LOG
echo "Thank you for choosing kind-voltha for you quick cluster needs." | tee -a $LOG
if [ "$WITH_TIMINGS" == "yes" ]; then
echo -e "$CLOCK ${BOLD}TOTAL: $(duration $(expr $(date +%s) - $TOTAL_START_TIME))${NORMAL}"
fi